git-commit-vandalism/builtin/difftool.c

756 lines
21 KiB
C
Raw Normal View History

/*
* "git difftool" builtin command
*
* This is a wrapper around the GIT_EXTERNAL_DIFF-compatible
* git-difftool--helper script.
*
* This script exports GIT_EXTERNAL_DIFF and GIT_PAGER for use by git.
* The GIT_DIFF* variables are exported for use by git-difftool--helper.
*
* Any arguments that are unknown to this script are forwarded to 'git diff'.
*
* Copyright (C) 2016 Johannes Schindelin
*/
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
#include "cache.h"
#include "config.h"
#include "builtin.h"
#include "run-command.h"
#include "exec_cmd.h"
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
#include "parse-options.h"
#include "argv-array.h"
#include "strbuf.h"
#include "lockfile.h"
#include "dir.h"
static char *diff_gui_tool;
static int trust_exit_code;
static const char *const builtin_difftool_usage[] = {
N_("git difftool [<options>] [<commit> [<commit>]] [--] [<path>...]"),
NULL
};
static int difftool_config(const char *var, const char *value, void *cb)
{
if (!strcmp(var, "diff.guitool")) {
diff_gui_tool = xstrdup(value);
return 0;
}
if (!strcmp(var, "difftool.trustexitcode")) {
trust_exit_code = git_config_bool(var, value);
return 0;
}
return git_default_config(var, value, cb);
}
static int print_tool_help(void)
{
const char *argv[] = { "mergetool", "--tool-help=diff", NULL };
return run_command_v_opt(argv, RUN_GIT_CMD);
}
static int parse_index_info(char *p, int *mode1, int *mode2,
struct object_id *oid1, struct object_id *oid2,
char *status)
{
if (*p != ':')
return error("expected ':', got '%c'", *p);
*mode1 = (int)strtol(p + 1, &p, 8);
if (*p != ' ')
return error("expected ' ', got '%c'", *p);
*mode2 = (int)strtol(p + 1, &p, 8);
if (*p != ' ')
return error("expected ' ', got '%c'", *p);
if (get_oid_hex(++p, oid1))
return error("expected object ID, got '%s'", p + 1);
p += GIT_SHA1_HEXSZ;
if (*p != ' ')
return error("expected ' ', got '%c'", *p);
if (get_oid_hex(++p, oid2))
return error("expected object ID, got '%s'", p + 1);
p += GIT_SHA1_HEXSZ;
if (*p != ' ')
return error("expected ' ', got '%c'", *p);
*status = *++p;
if (!*status)
return error("missing status");
if (p[1] && !isdigit(p[1]))
return error("unexpected trailer: '%s'", p + 1);
return 0;
}
/*
* Remove any trailing slash from $workdir
* before starting to avoid double slashes in symlink targets.
*/
static void add_path(struct strbuf *buf, size_t base_len, const char *path)
{
strbuf_setlen(buf, base_len);
if (buf->len && buf->buf[buf->len - 1] != '/')
strbuf_addch(buf, '/');
strbuf_addstr(buf, path);
}
/*
* Determine whether we can simply reuse the file in the worktree.
*/
static int use_wt_file(const char *workdir, const char *name,
struct object_id *oid)
{
struct strbuf buf = STRBUF_INIT;
struct stat st;
int use = 0;
strbuf_addstr(&buf, workdir);
add_path(&buf, buf.len, name);
if (!lstat(buf.buf, &st) && !S_ISLNK(st.st_mode)) {
struct object_id wt_oid;
int fd = open(buf.buf, O_RDONLY);
if (fd >= 0 &&
!index_fd(wt_oid.hash, fd, &st, OBJ_BLOB, name, 0)) {
if (is_null_oid(oid)) {
oidcpy(oid, &wt_oid);
use = 1;
} else if (!oidcmp(oid, &wt_oid))
use = 1;
}
}
strbuf_release(&buf);
return use;
}
struct working_tree_entry {
struct hashmap_entry entry;
char path[FLEX_ARRAY];
};
static int working_tree_entry_cmp(const void *unused_cmp_data,
struct working_tree_entry *a,
struct working_tree_entry *b,
void *unused_keydata)
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
{
return strcmp(a->path, b->path);
}
/*
* The `left` and `right` entries hold paths for the symlinks hashmap,
* and a SHA-1 surrounded by brief text for submodules.
*/
struct pair_entry {
struct hashmap_entry entry;
char left[PATH_MAX], right[PATH_MAX];
const char path[FLEX_ARRAY];
};
static int pair_cmp(const void *unused_cmp_data,
struct pair_entry *a, struct pair_entry *b,
void *unused_keydata)
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
{
return strcmp(a->path, b->path);
}
static void add_left_or_right(struct hashmap *map, const char *path,
const char *content, int is_right)
{
struct pair_entry *e, *existing;
FLEX_ALLOC_STR(e, path, path);
hashmap_entry_init(e, strhash(path));
existing = hashmap_get(map, e, NULL);
if (existing) {
free(e);
e = existing;
} else {
e->left[0] = e->right[0] = '\0';
hashmap_add(map, e);
}
strlcpy(is_right ? e->right : e->left, content, PATH_MAX);
}
struct path_entry {
struct hashmap_entry entry;
char path[FLEX_ARRAY];
};
static int path_entry_cmp(const void *unused_cmp_data,
struct path_entry *a, struct path_entry *b,
void *key)
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
{
return strcmp(a->path, key ? key : b->path);
}
static void changed_files(struct hashmap *result, const char *index_path,
const char *workdir)
{
struct child_process update_index = CHILD_PROCESS_INIT;
struct child_process diff_files = CHILD_PROCESS_INIT;
struct strbuf index_env = STRBUF_INIT, buf = STRBUF_INIT;
const char *git_dir = absolute_path(get_git_dir()), *env[] = {
NULL, NULL
};
FILE *fp;
strbuf_addf(&index_env, "GIT_INDEX_FILE=%s", index_path);
env[0] = index_env.buf;
argv_array_pushl(&update_index.args,
"--git-dir", git_dir, "--work-tree", workdir,
"update-index", "--really-refresh", "-q",
"--unmerged", NULL);
update_index.no_stdin = 1;
update_index.no_stdout = 1;
update_index.no_stderr = 1;
update_index.git_cmd = 1;
update_index.use_shell = 0;
update_index.clean_on_exit = 1;
update_index.dir = workdir;
update_index.env = env;
/* Ignore any errors of update-index */
run_command(&update_index);
argv_array_pushl(&diff_files.args,
"--git-dir", git_dir, "--work-tree", workdir,
"diff-files", "--name-only", "-z", NULL);
diff_files.no_stdin = 1;
diff_files.git_cmd = 1;
diff_files.use_shell = 0;
diff_files.clean_on_exit = 1;
diff_files.out = -1;
diff_files.dir = workdir;
diff_files.env = env;
if (start_command(&diff_files))
die("could not obtain raw diff");
fp = xfdopen(diff_files.out, "r");
while (!strbuf_getline_nul(&buf, fp)) {
struct path_entry *entry;
FLEX_ALLOC_STR(entry, path, buf.buf);
hashmap_entry_init(entry, strhash(buf.buf));
hashmap_add(result, entry);
}
fclose(fp);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
if (finish_command(&diff_files))
die("diff-files did not exit properly");
strbuf_release(&index_env);
strbuf_release(&buf);
}
static NORETURN void exit_cleanup(const char *tmpdir, int exit_code)
{
struct strbuf buf = STRBUF_INIT;
strbuf_addstr(&buf, tmpdir);
remove_dir_recursively(&buf, 0);
if (exit_code)
warning(_("failed: %d"), exit_code);
exit(exit_code);
}
static int ensure_leading_directories(char *path)
{
switch (safe_create_leading_directories(path)) {
case SCLD_OK:
case SCLD_EXISTS:
return 0;
default:
return error(_("could not create leading directories "
"of '%s'"), path);
}
}
/*
* Unconditional writing of a plain regular file is what
* "git difftool --dir-diff" wants to do for symlinks. We are preparing two
* temporary directories to be fed to a Git-unaware tool that knows how to
* show a diff of two directories (e.g. "diff -r A B").
*
* Because the tool is Git-unaware, if a symbolic link appears in either of
* these temporary directories, it will try to dereference and show the
* difference of the target of the symbolic link, which is not what we want,
* as the goal of the dir-diff mode is to produce an output that is logically
* equivalent to what "git diff" produces.
*
* Most importantly, we want to get textual comparison of the result of the
* readlink(2). get_symlink() provides that---it returns the contents of
* the symlink that gets written to a regular file to force the external tool
* to compare the readlink(2) result as text, even on a filesystem that is
* capable of doing a symbolic link.
*/
static char *get_symlink(const struct object_id *oid, const char *path)
{
char *data;
if (is_null_oid(oid)) {
/* The symlink is unknown to Git so read from the filesystem */
struct strbuf link = STRBUF_INIT;
if (has_symlinks) {
if (strbuf_readlink(&link, path, strlen(path)))
die(_("could not read symlink %s"), path);
} else if (strbuf_read_file(&link, path, 128))
die(_("could not read symlink file %s"), path);
data = strbuf_detach(&link, NULL);
} else {
enum object_type type;
unsigned long size;
data = read_sha1_file(oid->hash, &type, &size);
if (!data)
die(_("could not read object %s for symlink %s"),
oid_to_hex(oid), path);
}
return data;
}
static int checkout_path(unsigned mode, struct object_id *oid,
const char *path, const struct checkout *state)
{
struct cache_entry *ce;
int ret;
ce = make_cache_entry(mode, oid->hash, path, 0, 0);
ret = checkout_entry(ce, state, NULL);
free(ce);
return ret;
}
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
static int run_dir_diff(const char *extcmd, int symlinks, const char *prefix,
int argc, const char **argv)
{
char tmpdir[PATH_MAX];
struct strbuf info = STRBUF_INIT, lpath = STRBUF_INIT;
struct strbuf rpath = STRBUF_INIT, buf = STRBUF_INIT;
struct strbuf ldir = STRBUF_INIT, rdir = STRBUF_INIT;
struct strbuf wtdir = STRBUF_INIT;
char *lbase_dir, *rbase_dir;
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
size_t ldir_len, rdir_len, wtdir_len;
const char *workdir, *tmp;
int ret = 0, i;
FILE *fp;
struct hashmap working_tree_dups, submodules, symlinks2;
struct hashmap_iter iter;
struct pair_entry *entry;
struct index_state wtindex;
struct checkout lstate, rstate;
int rc, flags = RUN_GIT_CMD, err = 0;
struct child_process child = CHILD_PROCESS_INIT;
const char *helper_argv[] = { "difftool--helper", NULL, NULL, NULL };
struct hashmap wt_modified, tmp_modified;
int indices_loaded = 0;
workdir = get_git_work_tree();
/* Setup temp directories */
tmp = getenv("TMPDIR");
xsnprintf(tmpdir, sizeof(tmpdir), "%s/git-difftool.XXXXXX", tmp ? tmp : "/tmp");
if (!mkdtemp(tmpdir))
return error("could not create '%s'", tmpdir);
strbuf_addf(&ldir, "%s/left/", tmpdir);
strbuf_addf(&rdir, "%s/right/", tmpdir);
strbuf_addstr(&wtdir, workdir);
if (!wtdir.len || !is_dir_sep(wtdir.buf[wtdir.len - 1]))
strbuf_addch(&wtdir, '/');
mkdir(ldir.buf, 0700);
mkdir(rdir.buf, 0700);
memset(&wtindex, 0, sizeof(wtindex));
memset(&lstate, 0, sizeof(lstate));
lstate.base_dir = lbase_dir = xstrdup(ldir.buf);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
lstate.base_dir_len = ldir.len;
lstate.force = 1;
memset(&rstate, 0, sizeof(rstate));
rstate.base_dir = rbase_dir = xstrdup(rdir.buf);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
rstate.base_dir_len = rdir.len;
rstate.force = 1;
ldir_len = ldir.len;
rdir_len = rdir.len;
wtdir_len = wtdir.len;
hashmap_init(&working_tree_dups,
(hashmap_cmp_fn)working_tree_entry_cmp, NULL, 0);
hashmap_init(&submodules, (hashmap_cmp_fn)pair_cmp, NULL, 0);
hashmap_init(&symlinks2, (hashmap_cmp_fn)pair_cmp, NULL, 0);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
child.no_stdin = 1;
child.git_cmd = 1;
child.use_shell = 0;
child.clean_on_exit = 1;
child.dir = prefix;
child.out = -1;
argv_array_pushl(&child.args, "diff", "--raw", "--no-abbrev", "-z",
NULL);
for (i = 0; i < argc; i++)
argv_array_push(&child.args, argv[i]);
if (start_command(&child))
die("could not obtain raw diff");
fp = xfdopen(child.out, "r");
/* Build index info for left and right sides of the diff */
i = 0;
while (!strbuf_getline_nul(&info, fp)) {
int lmode, rmode;
struct object_id loid, roid;
char status;
const char *src_path, *dst_path;
if (starts_with(info.buf, "::"))
die(N_("combined diff formats('-c' and '--cc') are "
"not supported in\n"
"directory diff mode('-d' and '--dir-diff')."));
if (parse_index_info(info.buf, &lmode, &rmode, &loid, &roid,
&status))
break;
if (strbuf_getline_nul(&lpath, fp))
break;
src_path = lpath.buf;
i++;
if (status != 'C' && status != 'R') {
dst_path = src_path;
} else {
if (strbuf_getline_nul(&rpath, fp))
break;
dst_path = rpath.buf;
}
if (S_ISGITLINK(lmode) || S_ISGITLINK(rmode)) {
strbuf_reset(&buf);
strbuf_addf(&buf, "Subproject commit %s",
oid_to_hex(&loid));
add_left_or_right(&submodules, src_path, buf.buf, 0);
strbuf_reset(&buf);
strbuf_addf(&buf, "Subproject commit %s",
oid_to_hex(&roid));
if (!oidcmp(&loid, &roid))
strbuf_addstr(&buf, "-dirty");
add_left_or_right(&submodules, dst_path, buf.buf, 1);
continue;
}
if (S_ISLNK(lmode)) {
char *content = get_symlink(&loid, src_path);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
add_left_or_right(&symlinks2, src_path, content, 0);
free(content);
}
if (S_ISLNK(rmode)) {
char *content = get_symlink(&roid, dst_path);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
add_left_or_right(&symlinks2, dst_path, content, 1);
free(content);
}
if (lmode && status != 'C') {
if (checkout_path(lmode, &loid, src_path, &lstate)) {
ret = error("could not write '%s'", src_path);
goto finish;
}
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
}
if (rmode && !S_ISLNK(rmode)) {
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
struct working_tree_entry *entry;
/* Avoid duplicate working_tree entries */
FLEX_ALLOC_STR(entry, path, dst_path);
hashmap_entry_init(entry, strhash(dst_path));
if (hashmap_get(&working_tree_dups, entry, NULL)) {
free(entry);
continue;
}
hashmap_add(&working_tree_dups, entry);
if (!use_wt_file(workdir, dst_path, &roid)) {
if (checkout_path(rmode, &roid, dst_path,
&rstate)) {
ret = error("could not write '%s'",
dst_path);
goto finish;
}
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
} else if (!is_null_oid(&roid)) {
/*
* Changes in the working tree need special
* treatment since they are not part of the
* index.
*/
struct cache_entry *ce2 =
make_cache_entry(rmode, roid.hash,
dst_path, 0, 0);
add_index_entry(&wtindex, ce2,
ADD_CACHE_JUST_APPEND);
add_path(&rdir, rdir_len, dst_path);
if (ensure_leading_directories(rdir.buf)) {
ret = error("could not create "
"directory for '%s'",
dst_path);
goto finish;
}
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
add_path(&wtdir, wtdir_len, dst_path);
if (symlinks) {
if (symlink(wtdir.buf, rdir.buf)) {
ret = error_errno("could not symlink '%s' to '%s'", wtdir.buf, rdir.buf);
goto finish;
}
} else {
struct stat st;
if (stat(wtdir.buf, &st))
st.st_mode = 0644;
if (copy_file(rdir.buf, wtdir.buf,
st.st_mode)) {
ret = error("could not copy '%s' to '%s'", wtdir.buf, rdir.buf);
goto finish;
}
}
}
}
}
fclose(fp);
fp = NULL;
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
if (finish_command(&child)) {
ret = error("error occurred running diff --raw");
goto finish;
}
if (!i)
goto finish;
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
/*
* Changes to submodules require special treatment.This loop writes a
* temporary file to both the left and right directories to show the
* change in the recorded SHA1 for the submodule.
*/
hashmap_iter_init(&submodules, &iter);
while ((entry = hashmap_iter_next(&iter))) {
if (*entry->left) {
add_path(&ldir, ldir_len, entry->path);
ensure_leading_directories(ldir.buf);
write_file(ldir.buf, "%s", entry->left);
}
if (*entry->right) {
add_path(&rdir, rdir_len, entry->path);
ensure_leading_directories(rdir.buf);
write_file(rdir.buf, "%s", entry->right);
}
}
/*
* Symbolic links require special treatment.The standard "git diff"
* shows only the link itself, not the contents of the link target.
* This loop replicates that behavior.
*/
hashmap_iter_init(&symlinks2, &iter);
while ((entry = hashmap_iter_next(&iter))) {
if (*entry->left) {
add_path(&ldir, ldir_len, entry->path);
ensure_leading_directories(ldir.buf);
write_file(ldir.buf, "%s", entry->left);
}
if (*entry->right) {
add_path(&rdir, rdir_len, entry->path);
ensure_leading_directories(rdir.buf);
write_file(rdir.buf, "%s", entry->right);
}
}
strbuf_release(&buf);
strbuf_setlen(&ldir, ldir_len);
helper_argv[1] = ldir.buf;
strbuf_setlen(&rdir, rdir_len);
helper_argv[2] = rdir.buf;
if (extcmd) {
helper_argv[0] = extcmd;
flags = 0;
} else
setenv("GIT_DIFFTOOL_DIRDIFF", "true", 1);
rc = run_command_v_opt(helper_argv, flags);
/*
* If the diff includes working copy files and those
* files were modified during the diff, then the changes
* should be copied back to the working tree.
* Do not copy back files when symlinks are used and the
* external tool did not replace the original link with a file.
*
* These hashes are loaded lazily since they aren't needed
* in the common case of --symlinks and the difftool updating
* files through the symlink.
*/
hashmap_init(&wt_modified, (hashmap_cmp_fn)path_entry_cmp,
NULL, wtindex.cache_nr);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
hashmap_init(&tmp_modified, (hashmap_cmp_fn)path_entry_cmp,
NULL, wtindex.cache_nr);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
for (i = 0; i < wtindex.cache_nr; i++) {
struct hashmap_entry dummy;
const char *name = wtindex.cache[i]->name;
struct stat st;
add_path(&rdir, rdir_len, name);
if (lstat(rdir.buf, &st))
continue;
if ((symlinks && S_ISLNK(st.st_mode)) || !S_ISREG(st.st_mode))
continue;
if (!indices_loaded) {
static struct lock_file lock;
strbuf_reset(&buf);
strbuf_addf(&buf, "%s/wtindex", tmpdir);
if (hold_lock_file_for_update(&lock, buf.buf, 0) < 0 ||
write_locked_index(&wtindex, &lock, COMMIT_LOCK)) {
ret = error("could not write %s", buf.buf);
rollback_lock_file(&lock);
goto finish;
}
changed_files(&wt_modified, buf.buf, workdir);
strbuf_setlen(&rdir, rdir_len);
changed_files(&tmp_modified, buf.buf, rdir.buf);
add_path(&rdir, rdir_len, name);
indices_loaded = 1;
}
hashmap_entry_init(&dummy, strhash(name));
if (hashmap_get(&tmp_modified, &dummy, name)) {
add_path(&wtdir, wtdir_len, name);
if (hashmap_get(&wt_modified, &dummy, name)) {
warning(_("both files modified: '%s' and '%s'."),
wtdir.buf, rdir.buf);
warning(_("working tree file has been left."));
warning("%s", "");
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
err = 1;
} else if (unlink(wtdir.buf) ||
copy_file(wtdir.buf, rdir.buf, st.st_mode))
warning_errno(_("could not copy '%s' to '%s'"),
rdir.buf, wtdir.buf);
}
}
if (err) {
warning(_("temporary files exist in '%s'."), tmpdir);
warning(_("you may want to cleanup or recover these."));
exit(1);
} else
exit_cleanup(tmpdir, rc);
finish:
if (fp)
fclose(fp);
free(lbase_dir);
free(rbase_dir);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
strbuf_release(&ldir);
strbuf_release(&rdir);
strbuf_release(&wtdir);
strbuf_release(&buf);
return ret;
}
static int run_file_diff(int prompt, const char *prefix,
int argc, const char **argv)
{
struct argv_array args = ARGV_ARRAY_INIT;
const char *env[] = {
"GIT_PAGER=", "GIT_EXTERNAL_DIFF=git-difftool--helper", NULL,
NULL
};
int ret = 0, i;
if (prompt > 0)
env[2] = "GIT_DIFFTOOL_PROMPT=true";
else if (!prompt)
env[2] = "GIT_DIFFTOOL_NO_PROMPT=true";
argv_array_push(&args, "diff");
for (i = 0; i < argc; i++)
argv_array_push(&args, argv[i]);
ret = run_command_v_opt_cd_env(args.argv, RUN_GIT_CMD, prefix, env);
exit(ret);
}
int cmd_difftool(int argc, const char **argv, const char *prefix)
{
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
int use_gui_tool = 0, dir_diff = 0, prompt = -1, symlinks = 0,
tool_help = 0;
static char *difftool_cmd = NULL, *extcmd = NULL;
struct option builtin_difftool_options[] = {
OPT_BOOL('g', "gui", &use_gui_tool,
N_("use `diff.guitool` instead of `diff.tool`")),
OPT_BOOL('d', "dir-diff", &dir_diff,
N_("perform a full-directory diff")),
{ OPTION_SET_INT, 'y', "no-prompt", &prompt, NULL,
N_("do not prompt before launching a diff tool"),
PARSE_OPT_NOARG | PARSE_OPT_NONEG, NULL, 0},
{ OPTION_SET_INT, 0, "prompt", &prompt, NULL, NULL,
PARSE_OPT_NOARG | PARSE_OPT_NONEG | PARSE_OPT_HIDDEN,
NULL, 1 },
OPT_BOOL(0, "symlinks", &symlinks,
N_("use symlinks in dir-diff mode")),
OPT_STRING('t', "tool", &difftool_cmd, N_("<tool>"),
N_("use the specified diff tool")),
OPT_BOOL(0, "tool-help", &tool_help,
N_("print a list of diff tools that may be used with "
"`--tool`")),
OPT_BOOL(0, "trust-exit-code", &trust_exit_code,
N_("make 'git-difftool' exit when an invoked diff "
"tool returns a non - zero exit code")),
OPT_STRING('x', "extcmd", &extcmd, N_("<command>"),
N_("specify a custom command for viewing diffs")),
OPT_END()
};
git_config(difftool_config, NULL);
symlinks = has_symlinks;
argc = parse_options(argc, argv, prefix, builtin_difftool_options,
builtin_difftool_usage, PARSE_OPT_KEEP_UNKNOWN |
PARSE_OPT_KEEP_DASHDASH);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
if (tool_help)
return print_tool_help();
/* NEEDSWORK: once we no longer spawn anything, remove this */
setenv(GIT_DIR_ENVIRONMENT, absolute_path(get_git_dir()), 1);
setenv(GIT_WORK_TREE_ENVIRONMENT, absolute_path(get_git_work_tree()), 1);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-19 21:30:36 +01:00
if (use_gui_tool && diff_gui_tool && *diff_gui_tool)
setenv("GIT_DIFF_TOOL", diff_gui_tool, 1);
else if (difftool_cmd) {
if (*difftool_cmd)
setenv("GIT_DIFF_TOOL", difftool_cmd, 1);
else
die(_("no <tool> given for --tool=<tool>"));
}
if (extcmd) {
if (*extcmd)
setenv("GIT_DIFFTOOL_EXTCMD", extcmd, 1);
else
die(_("no <cmd> given for --extcmd=<cmd>"));
}
setenv("GIT_DIFFTOOL_TRUST_EXIT_CODE",
trust_exit_code ? "true" : "false", 1);
/*
* In directory diff mode, 'git-difftool--helper' is called once
* to compare the a / b directories. In file diff mode, 'git diff'
* will invoke a separate instance of 'git-difftool--helper' for
* each file that changed.
*/
if (dir_diff)
return run_dir_diff(extcmd, symlinks, prefix, argc, argv);
return run_file_diff(prompt, prefix, argc, argv);
}