git-commit-vandalism/gpg-interface.c

470 lines
12 KiB
C
Raw Normal View History

#include "cache.h"
#include "config.h"
#include "run-command.h"
#include "strbuf.h"
#include "gpg-interface.h"
#include "sigchain.h"
#include "tempfile.h"
static char *configured_signing_key;
gpg-interface: add minTrustLevel as a configuration option Previously, signature verification for merge and pull operations checked if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in verify_merge_signature(). If that was the case, the process die()d. The other code paths that did signature verification relied entirely on the return code from check_commit_signature(). And signatures made with a good key, irregardless of its trust level, was considered valid by check_commit_signature(). This difference in behavior might induce users to erroneously assume that the trust level of a key in their keyring is always considered by Git, even for operations where it is not (e.g. during a verify-commit or verify-tag). The way it worked was by gpg-interface.c storing the result from the key/signature status *and* the lowest-two trust levels in the `result` member of the signature_check structure (the last of these status lines that were encountered got written to `result`). These are documented in GPG under the subsection `General status codes` and `Key related`, respectively [1]. The GPG documentation says the following on the TRUST_ status codes [1]: """ These are several similar status codes: - TRUST_UNDEFINED <error_token> - TRUST_NEVER <error_token> - TRUST_MARGINAL [0 [<validation_model>]] - TRUST_FULLY [0 [<validation_model>]] - TRUST_ULTIMATE [0 [<validation_model>]] For good signatures one of these status lines are emitted to indicate the validity of the key used to create the signature. The error token values are currently only emitted by gpgsm. """ My interpretation is that the trust level is conceptionally different from the validity of the key and/or signature. That seems to also have been the assumption of the old code in check_signature() where a result of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED) were both considered a success. The two cases where a result of 'U' had special meaning were in verify_merge_signature() (where this caused git to die()) and in format_commit_one() (where it affected the output of the %G? format specifier). I think it makes sense to refactor the processing of TRUST_ status lines such that users can configure a minimum trust level that is enforced globally, rather than have individual parts of git (e.g. merge) do it themselves (except for a grace period with backward compatibility). I also think it makes sense to not store the trust level in the same struct member as the key/signature status. While the presence of a TRUST_ status code does imply that the signature is good (see the first paragraph in the included snippet above), as far as I can tell, the order of the status lines from GPG isn't well-defined; thus it would seem plausible that the trust level could be overwritten with the key/signature status if they were stored in the same member of the signature_check structure. This patch introduces a new configuration option: gpg.minTrustLevel. It consolidates trust-level verification to gpg-interface.c and adds a new `trust_level` member to the signature_check structure. Backward-compatibility is maintained by introducing a special case in verify_merge_signature() such that if no user-configurable gpg.minTrustLevel is set, then the old behavior of rejecting TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand, gpg.minTrustLevel is set, then that value overrides the old behavior. Similarly, the %G? format specifier will continue show 'U' for signatures made with a key that has a trust level of TRUST_UNDEFINED or TRUST_NEVER, even though the 'U' character no longer exist in the `result` member of the signature_check structure. A new format specifier, %GT, is also introduced for users that want to show all possible trust levels for a signature. Another approach would have been to simply drop the trust-level requirement in verify_merge_signature(). This would also have made the behavior consistent with other parts of git that perform signature verification. However, requiring a minimum trust level for signing keys does seem to have a real-world use-case. For example, the build system used by the Qubes OS project currently parses the raw output from verify-tag in order to assert a minimum trust level for keys used to sign git tags [2]. [1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master [2] https://github.com/QubesOS/qubes-builder/blob/9674c1991deef45b1a1b1c71fddfab14ba50dccf/scripts/verify-git-tag#L43 Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-27 14:55:57 +01:00
static enum signature_trust_level configured_min_trust_level = TRUST_UNDEFINED;
struct gpg_format {
const char *name;
const char *program;
const char **verify_args;
const char **sigs;
};
static const char *openpgp_verify_args[] = {
"--keyid-format=long",
NULL
};
static const char *openpgp_sigs[] = {
"-----BEGIN PGP SIGNATURE-----",
"-----BEGIN PGP MESSAGE-----",
NULL
};
static const char *x509_verify_args[] = {
NULL
};
static const char *x509_sigs[] = {
"-----BEGIN SIGNED MESSAGE-----",
NULL
};
static struct gpg_format gpg_format[] = {
{ .name = "openpgp", .program = "gpg",
.verify_args = openpgp_verify_args,
.sigs = openpgp_sigs
},
{ .name = "x509", .program = "gpgsm",
.verify_args = x509_verify_args,
.sigs = x509_sigs
},
};
static struct gpg_format *use_format = &gpg_format[0];
static struct gpg_format *get_format_by_name(const char *str)
{
int i;
for (i = 0; i < ARRAY_SIZE(gpg_format); i++)
if (!strcmp(gpg_format[i].name, str))
return gpg_format + i;
return NULL;
}
static struct gpg_format *get_format_by_sig(const char *sig)
{
int i, j;
for (i = 0; i < ARRAY_SIZE(gpg_format); i++)
for (j = 0; gpg_format[i].sigs[j]; j++)
if (starts_with(sig, gpg_format[i].sigs[j]))
return gpg_format + i;
return NULL;
}
void signature_check_clear(struct signature_check *sigc)
{
FREE_AND_NULL(sigc->payload);
FREE_AND_NULL(sigc->gpg_output);
FREE_AND_NULL(sigc->gpg_status);
FREE_AND_NULL(sigc->signer);
FREE_AND_NULL(sigc->key);
FREE_AND_NULL(sigc->fingerprint);
FREE_AND_NULL(sigc->primary_key_fingerprint);
}
/* An exclusive status -- only one of them can appear in output */
#define GPG_STATUS_EXCLUSIVE (1<<0)
/* The status includes key identifier */
#define GPG_STATUS_KEYID (1<<1)
/* The status includes user identifier */
#define GPG_STATUS_UID (1<<2)
/* The status includes key fingerprints */
#define GPG_STATUS_FINGERPRINT (1<<3)
gpg-interface: add minTrustLevel as a configuration option Previously, signature verification for merge and pull operations checked if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in verify_merge_signature(). If that was the case, the process die()d. The other code paths that did signature verification relied entirely on the return code from check_commit_signature(). And signatures made with a good key, irregardless of its trust level, was considered valid by check_commit_signature(). This difference in behavior might induce users to erroneously assume that the trust level of a key in their keyring is always considered by Git, even for operations where it is not (e.g. during a verify-commit or verify-tag). The way it worked was by gpg-interface.c storing the result from the key/signature status *and* the lowest-two trust levels in the `result` member of the signature_check structure (the last of these status lines that were encountered got written to `result`). These are documented in GPG under the subsection `General status codes` and `Key related`, respectively [1]. The GPG documentation says the following on the TRUST_ status codes [1]: """ These are several similar status codes: - TRUST_UNDEFINED <error_token> - TRUST_NEVER <error_token> - TRUST_MARGINAL [0 [<validation_model>]] - TRUST_FULLY [0 [<validation_model>]] - TRUST_ULTIMATE [0 [<validation_model>]] For good signatures one of these status lines are emitted to indicate the validity of the key used to create the signature. The error token values are currently only emitted by gpgsm. """ My interpretation is that the trust level is conceptionally different from the validity of the key and/or signature. That seems to also have been the assumption of the old code in check_signature() where a result of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED) were both considered a success. The two cases where a result of 'U' had special meaning were in verify_merge_signature() (where this caused git to die()) and in format_commit_one() (where it affected the output of the %G? format specifier). I think it makes sense to refactor the processing of TRUST_ status lines such that users can configure a minimum trust level that is enforced globally, rather than have individual parts of git (e.g. merge) do it themselves (except for a grace period with backward compatibility). I also think it makes sense to not store the trust level in the same struct member as the key/signature status. While the presence of a TRUST_ status code does imply that the signature is good (see the first paragraph in the included snippet above), as far as I can tell, the order of the status lines from GPG isn't well-defined; thus it would seem plausible that the trust level could be overwritten with the key/signature status if they were stored in the same member of the signature_check structure. This patch introduces a new configuration option: gpg.minTrustLevel. It consolidates trust-level verification to gpg-interface.c and adds a new `trust_level` member to the signature_check structure. Backward-compatibility is maintained by introducing a special case in verify_merge_signature() such that if no user-configurable gpg.minTrustLevel is set, then the old behavior of rejecting TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand, gpg.minTrustLevel is set, then that value overrides the old behavior. Similarly, the %G? format specifier will continue show 'U' for signatures made with a key that has a trust level of TRUST_UNDEFINED or TRUST_NEVER, even though the 'U' character no longer exist in the `result` member of the signature_check structure. A new format specifier, %GT, is also introduced for users that want to show all possible trust levels for a signature. Another approach would have been to simply drop the trust-level requirement in verify_merge_signature(). This would also have made the behavior consistent with other parts of git that perform signature verification. However, requiring a minimum trust level for signing keys does seem to have a real-world use-case. For example, the build system used by the Qubes OS project currently parses the raw output from verify-tag in order to assert a minimum trust level for keys used to sign git tags [2]. [1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master [2] https://github.com/QubesOS/qubes-builder/blob/9674c1991deef45b1a1b1c71fddfab14ba50dccf/scripts/verify-git-tag#L43 Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-27 14:55:57 +01:00
/* The status includes trust level */
#define GPG_STATUS_TRUST_LEVEL (1<<4)
/* Short-hand for standard exclusive *SIG status with keyid & UID */
#define GPG_STATUS_STDSIG (GPG_STATUS_EXCLUSIVE|GPG_STATUS_KEYID|GPG_STATUS_UID)
static struct {
char result;
const char *check;
unsigned int flags;
} sigcheck_gpg_status[] = {
{ 'G', "GOODSIG ", GPG_STATUS_STDSIG },
{ 'B', "BADSIG ", GPG_STATUS_STDSIG },
{ 'E', "ERRSIG ", GPG_STATUS_EXCLUSIVE|GPG_STATUS_KEYID },
{ 'X', "EXPSIG ", GPG_STATUS_STDSIG },
{ 'Y', "EXPKEYSIG ", GPG_STATUS_STDSIG },
{ 'R', "REVKEYSIG ", GPG_STATUS_STDSIG },
{ 0, "VALIDSIG ", GPG_STATUS_FINGERPRINT },
gpg-interface: add minTrustLevel as a configuration option Previously, signature verification for merge and pull operations checked if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in verify_merge_signature(). If that was the case, the process die()d. The other code paths that did signature verification relied entirely on the return code from check_commit_signature(). And signatures made with a good key, irregardless of its trust level, was considered valid by check_commit_signature(). This difference in behavior might induce users to erroneously assume that the trust level of a key in their keyring is always considered by Git, even for operations where it is not (e.g. during a verify-commit or verify-tag). The way it worked was by gpg-interface.c storing the result from the key/signature status *and* the lowest-two trust levels in the `result` member of the signature_check structure (the last of these status lines that were encountered got written to `result`). These are documented in GPG under the subsection `General status codes` and `Key related`, respectively [1]. The GPG documentation says the following on the TRUST_ status codes [1]: """ These are several similar status codes: - TRUST_UNDEFINED <error_token> - TRUST_NEVER <error_token> - TRUST_MARGINAL [0 [<validation_model>]] - TRUST_FULLY [0 [<validation_model>]] - TRUST_ULTIMATE [0 [<validation_model>]] For good signatures one of these status lines are emitted to indicate the validity of the key used to create the signature. The error token values are currently only emitted by gpgsm. """ My interpretation is that the trust level is conceptionally different from the validity of the key and/or signature. That seems to also have been the assumption of the old code in check_signature() where a result of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED) were both considered a success. The two cases where a result of 'U' had special meaning were in verify_merge_signature() (where this caused git to die()) and in format_commit_one() (where it affected the output of the %G? format specifier). I think it makes sense to refactor the processing of TRUST_ status lines such that users can configure a minimum trust level that is enforced globally, rather than have individual parts of git (e.g. merge) do it themselves (except for a grace period with backward compatibility). I also think it makes sense to not store the trust level in the same struct member as the key/signature status. While the presence of a TRUST_ status code does imply that the signature is good (see the first paragraph in the included snippet above), as far as I can tell, the order of the status lines from GPG isn't well-defined; thus it would seem plausible that the trust level could be overwritten with the key/signature status if they were stored in the same member of the signature_check structure. This patch introduces a new configuration option: gpg.minTrustLevel. It consolidates trust-level verification to gpg-interface.c and adds a new `trust_level` member to the signature_check structure. Backward-compatibility is maintained by introducing a special case in verify_merge_signature() such that if no user-configurable gpg.minTrustLevel is set, then the old behavior of rejecting TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand, gpg.minTrustLevel is set, then that value overrides the old behavior. Similarly, the %G? format specifier will continue show 'U' for signatures made with a key that has a trust level of TRUST_UNDEFINED or TRUST_NEVER, even though the 'U' character no longer exist in the `result` member of the signature_check structure. A new format specifier, %GT, is also introduced for users that want to show all possible trust levels for a signature. Another approach would have been to simply drop the trust-level requirement in verify_merge_signature(). This would also have made the behavior consistent with other parts of git that perform signature verification. However, requiring a minimum trust level for signing keys does seem to have a real-world use-case. For example, the build system used by the Qubes OS project currently parses the raw output from verify-tag in order to assert a minimum trust level for keys used to sign git tags [2]. [1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master [2] https://github.com/QubesOS/qubes-builder/blob/9674c1991deef45b1a1b1c71fddfab14ba50dccf/scripts/verify-git-tag#L43 Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-27 14:55:57 +01:00
{ 0, "TRUST_", GPG_STATUS_TRUST_LEVEL },
};
static struct {
const char *key;
enum signature_trust_level value;
} sigcheck_gpg_trust_level[] = {
{ "UNDEFINED", TRUST_UNDEFINED },
{ "NEVER", TRUST_NEVER },
{ "MARGINAL", TRUST_MARGINAL },
{ "FULLY", TRUST_FULLY },
{ "ULTIMATE", TRUST_ULTIMATE },
};
static void replace_cstring(char **field, const char *line, const char *next)
{
free(*field);
if (line && next)
*field = xmemdupz(line, next - line);
else
*field = NULL;
}
gpg-interface: add minTrustLevel as a configuration option Previously, signature verification for merge and pull operations checked if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in verify_merge_signature(). If that was the case, the process die()d. The other code paths that did signature verification relied entirely on the return code from check_commit_signature(). And signatures made with a good key, irregardless of its trust level, was considered valid by check_commit_signature(). This difference in behavior might induce users to erroneously assume that the trust level of a key in their keyring is always considered by Git, even for operations where it is not (e.g. during a verify-commit or verify-tag). The way it worked was by gpg-interface.c storing the result from the key/signature status *and* the lowest-two trust levels in the `result` member of the signature_check structure (the last of these status lines that were encountered got written to `result`). These are documented in GPG under the subsection `General status codes` and `Key related`, respectively [1]. The GPG documentation says the following on the TRUST_ status codes [1]: """ These are several similar status codes: - TRUST_UNDEFINED <error_token> - TRUST_NEVER <error_token> - TRUST_MARGINAL [0 [<validation_model>]] - TRUST_FULLY [0 [<validation_model>]] - TRUST_ULTIMATE [0 [<validation_model>]] For good signatures one of these status lines are emitted to indicate the validity of the key used to create the signature. The error token values are currently only emitted by gpgsm. """ My interpretation is that the trust level is conceptionally different from the validity of the key and/or signature. That seems to also have been the assumption of the old code in check_signature() where a result of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED) were both considered a success. The two cases where a result of 'U' had special meaning were in verify_merge_signature() (where this caused git to die()) and in format_commit_one() (where it affected the output of the %G? format specifier). I think it makes sense to refactor the processing of TRUST_ status lines such that users can configure a minimum trust level that is enforced globally, rather than have individual parts of git (e.g. merge) do it themselves (except for a grace period with backward compatibility). I also think it makes sense to not store the trust level in the same struct member as the key/signature status. While the presence of a TRUST_ status code does imply that the signature is good (see the first paragraph in the included snippet above), as far as I can tell, the order of the status lines from GPG isn't well-defined; thus it would seem plausible that the trust level could be overwritten with the key/signature status if they were stored in the same member of the signature_check structure. This patch introduces a new configuration option: gpg.minTrustLevel. It consolidates trust-level verification to gpg-interface.c and adds a new `trust_level` member to the signature_check structure. Backward-compatibility is maintained by introducing a special case in verify_merge_signature() such that if no user-configurable gpg.minTrustLevel is set, then the old behavior of rejecting TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand, gpg.minTrustLevel is set, then that value overrides the old behavior. Similarly, the %G? format specifier will continue show 'U' for signatures made with a key that has a trust level of TRUST_UNDEFINED or TRUST_NEVER, even though the 'U' character no longer exist in the `result` member of the signature_check structure. A new format specifier, %GT, is also introduced for users that want to show all possible trust levels for a signature. Another approach would have been to simply drop the trust-level requirement in verify_merge_signature(). This would also have made the behavior consistent with other parts of git that perform signature verification. However, requiring a minimum trust level for signing keys does seem to have a real-world use-case. For example, the build system used by the Qubes OS project currently parses the raw output from verify-tag in order to assert a minimum trust level for keys used to sign git tags [2]. [1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master [2] https://github.com/QubesOS/qubes-builder/blob/9674c1991deef45b1a1b1c71fddfab14ba50dccf/scripts/verify-git-tag#L43 Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-27 14:55:57 +01:00
static int parse_gpg_trust_level(const char *level,
enum signature_trust_level *res)
{
size_t i;
for (i = 0; i < ARRAY_SIZE(sigcheck_gpg_trust_level); i++) {
if (!strcmp(sigcheck_gpg_trust_level[i].key, level)) {
*res = sigcheck_gpg_trust_level[i].value;
return 0;
}
}
return 1;
}
static void parse_gpg_output(struct signature_check *sigc)
{
const char *buf = sigc->gpg_status;
const char *line, *next;
int i, j;
int seen_exclusive_status = 0;
/* Iterate over all lines */
for (line = buf; *line; line = strchrnul(line+1, '\n')) {
while (*line == '\n')
line++;
if (!*line)
break;
/* Skip lines that don't start with GNUPG status */
if (!skip_prefix(line, "[GNUPG:] ", &line))
continue;
/* Iterate over all search strings */
for (i = 0; i < ARRAY_SIZE(sigcheck_gpg_status); i++) {
if (skip_prefix(line, sigcheck_gpg_status[i].check, &line)) {
gpg-interface: add minTrustLevel as a configuration option Previously, signature verification for merge and pull operations checked if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in verify_merge_signature(). If that was the case, the process die()d. The other code paths that did signature verification relied entirely on the return code from check_commit_signature(). And signatures made with a good key, irregardless of its trust level, was considered valid by check_commit_signature(). This difference in behavior might induce users to erroneously assume that the trust level of a key in their keyring is always considered by Git, even for operations where it is not (e.g. during a verify-commit or verify-tag). The way it worked was by gpg-interface.c storing the result from the key/signature status *and* the lowest-two trust levels in the `result` member of the signature_check structure (the last of these status lines that were encountered got written to `result`). These are documented in GPG under the subsection `General status codes` and `Key related`, respectively [1]. The GPG documentation says the following on the TRUST_ status codes [1]: """ These are several similar status codes: - TRUST_UNDEFINED <error_token> - TRUST_NEVER <error_token> - TRUST_MARGINAL [0 [<validation_model>]] - TRUST_FULLY [0 [<validation_model>]] - TRUST_ULTIMATE [0 [<validation_model>]] For good signatures one of these status lines are emitted to indicate the validity of the key used to create the signature. The error token values are currently only emitted by gpgsm. """ My interpretation is that the trust level is conceptionally different from the validity of the key and/or signature. That seems to also have been the assumption of the old code in check_signature() where a result of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED) were both considered a success. The two cases where a result of 'U' had special meaning were in verify_merge_signature() (where this caused git to die()) and in format_commit_one() (where it affected the output of the %G? format specifier). I think it makes sense to refactor the processing of TRUST_ status lines such that users can configure a minimum trust level that is enforced globally, rather than have individual parts of git (e.g. merge) do it themselves (except for a grace period with backward compatibility). I also think it makes sense to not store the trust level in the same struct member as the key/signature status. While the presence of a TRUST_ status code does imply that the signature is good (see the first paragraph in the included snippet above), as far as I can tell, the order of the status lines from GPG isn't well-defined; thus it would seem plausible that the trust level could be overwritten with the key/signature status if they were stored in the same member of the signature_check structure. This patch introduces a new configuration option: gpg.minTrustLevel. It consolidates trust-level verification to gpg-interface.c and adds a new `trust_level` member to the signature_check structure. Backward-compatibility is maintained by introducing a special case in verify_merge_signature() such that if no user-configurable gpg.minTrustLevel is set, then the old behavior of rejecting TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand, gpg.minTrustLevel is set, then that value overrides the old behavior. Similarly, the %G? format specifier will continue show 'U' for signatures made with a key that has a trust level of TRUST_UNDEFINED or TRUST_NEVER, even though the 'U' character no longer exist in the `result` member of the signature_check structure. A new format specifier, %GT, is also introduced for users that want to show all possible trust levels for a signature. Another approach would have been to simply drop the trust-level requirement in verify_merge_signature(). This would also have made the behavior consistent with other parts of git that perform signature verification. However, requiring a minimum trust level for signing keys does seem to have a real-world use-case. For example, the build system used by the Qubes OS project currently parses the raw output from verify-tag in order to assert a minimum trust level for keys used to sign git tags [2]. [1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master [2] https://github.com/QubesOS/qubes-builder/blob/9674c1991deef45b1a1b1c71fddfab14ba50dccf/scripts/verify-git-tag#L43 Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-27 14:55:57 +01:00
/*
* GOODSIG, BADSIG etc. can occur only once for
* each signature. Therefore, if we had more
* than one then we're dealing with multiple
* signatures. We don't support them
* currently, and they're rather hard to
* create, so something is likely fishy and we
* should reject them altogether.
*/
if (sigcheck_gpg_status[i].flags & GPG_STATUS_EXCLUSIVE) {
if (seen_exclusive_status++)
gpg-interface: add minTrustLevel as a configuration option Previously, signature verification for merge and pull operations checked if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in verify_merge_signature(). If that was the case, the process die()d. The other code paths that did signature verification relied entirely on the return code from check_commit_signature(). And signatures made with a good key, irregardless of its trust level, was considered valid by check_commit_signature(). This difference in behavior might induce users to erroneously assume that the trust level of a key in their keyring is always considered by Git, even for operations where it is not (e.g. during a verify-commit or verify-tag). The way it worked was by gpg-interface.c storing the result from the key/signature status *and* the lowest-two trust levels in the `result` member of the signature_check structure (the last of these status lines that were encountered got written to `result`). These are documented in GPG under the subsection `General status codes` and `Key related`, respectively [1]. The GPG documentation says the following on the TRUST_ status codes [1]: """ These are several similar status codes: - TRUST_UNDEFINED <error_token> - TRUST_NEVER <error_token> - TRUST_MARGINAL [0 [<validation_model>]] - TRUST_FULLY [0 [<validation_model>]] - TRUST_ULTIMATE [0 [<validation_model>]] For good signatures one of these status lines are emitted to indicate the validity of the key used to create the signature. The error token values are currently only emitted by gpgsm. """ My interpretation is that the trust level is conceptionally different from the validity of the key and/or signature. That seems to also have been the assumption of the old code in check_signature() where a result of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED) were both considered a success. The two cases where a result of 'U' had special meaning were in verify_merge_signature() (where this caused git to die()) and in format_commit_one() (where it affected the output of the %G? format specifier). I think it makes sense to refactor the processing of TRUST_ status lines such that users can configure a minimum trust level that is enforced globally, rather than have individual parts of git (e.g. merge) do it themselves (except for a grace period with backward compatibility). I also think it makes sense to not store the trust level in the same struct member as the key/signature status. While the presence of a TRUST_ status code does imply that the signature is good (see the first paragraph in the included snippet above), as far as I can tell, the order of the status lines from GPG isn't well-defined; thus it would seem plausible that the trust level could be overwritten with the key/signature status if they were stored in the same member of the signature_check structure. This patch introduces a new configuration option: gpg.minTrustLevel. It consolidates trust-level verification to gpg-interface.c and adds a new `trust_level` member to the signature_check structure. Backward-compatibility is maintained by introducing a special case in verify_merge_signature() such that if no user-configurable gpg.minTrustLevel is set, then the old behavior of rejecting TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand, gpg.minTrustLevel is set, then that value overrides the old behavior. Similarly, the %G? format specifier will continue show 'U' for signatures made with a key that has a trust level of TRUST_UNDEFINED or TRUST_NEVER, even though the 'U' character no longer exist in the `result` member of the signature_check structure. A new format specifier, %GT, is also introduced for users that want to show all possible trust levels for a signature. Another approach would have been to simply drop the trust-level requirement in verify_merge_signature(). This would also have made the behavior consistent with other parts of git that perform signature verification. However, requiring a minimum trust level for signing keys does seem to have a real-world use-case. For example, the build system used by the Qubes OS project currently parses the raw output from verify-tag in order to assert a minimum trust level for keys used to sign git tags [2]. [1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master [2] https://github.com/QubesOS/qubes-builder/blob/9674c1991deef45b1a1b1c71fddfab14ba50dccf/scripts/verify-git-tag#L43 Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-27 14:55:57 +01:00
goto error;
}
if (sigcheck_gpg_status[i].result)
sigc->result = sigcheck_gpg_status[i].result;
/* Do we have key information? */
if (sigcheck_gpg_status[i].flags & GPG_STATUS_KEYID) {
next = strchrnul(line, ' ');
replace_cstring(&sigc->key, line, next);
/* Do we have signer information? */
if (*next && (sigcheck_gpg_status[i].flags & GPG_STATUS_UID)) {
line = next + 1;
next = strchrnul(line, '\n');
replace_cstring(&sigc->signer, line, next);
}
}
gpg-interface: add minTrustLevel as a configuration option Previously, signature verification for merge and pull operations checked if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in verify_merge_signature(). If that was the case, the process die()d. The other code paths that did signature verification relied entirely on the return code from check_commit_signature(). And signatures made with a good key, irregardless of its trust level, was considered valid by check_commit_signature(). This difference in behavior might induce users to erroneously assume that the trust level of a key in their keyring is always considered by Git, even for operations where it is not (e.g. during a verify-commit or verify-tag). The way it worked was by gpg-interface.c storing the result from the key/signature status *and* the lowest-two trust levels in the `result` member of the signature_check structure (the last of these status lines that were encountered got written to `result`). These are documented in GPG under the subsection `General status codes` and `Key related`, respectively [1]. The GPG documentation says the following on the TRUST_ status codes [1]: """ These are several similar status codes: - TRUST_UNDEFINED <error_token> - TRUST_NEVER <error_token> - TRUST_MARGINAL [0 [<validation_model>]] - TRUST_FULLY [0 [<validation_model>]] - TRUST_ULTIMATE [0 [<validation_model>]] For good signatures one of these status lines are emitted to indicate the validity of the key used to create the signature. The error token values are currently only emitted by gpgsm. """ My interpretation is that the trust level is conceptionally different from the validity of the key and/or signature. That seems to also have been the assumption of the old code in check_signature() where a result of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED) were both considered a success. The two cases where a result of 'U' had special meaning were in verify_merge_signature() (where this caused git to die()) and in format_commit_one() (where it affected the output of the %G? format specifier). I think it makes sense to refactor the processing of TRUST_ status lines such that users can configure a minimum trust level that is enforced globally, rather than have individual parts of git (e.g. merge) do it themselves (except for a grace period with backward compatibility). I also think it makes sense to not store the trust level in the same struct member as the key/signature status. While the presence of a TRUST_ status code does imply that the signature is good (see the first paragraph in the included snippet above), as far as I can tell, the order of the status lines from GPG isn't well-defined; thus it would seem plausible that the trust level could be overwritten with the key/signature status if they were stored in the same member of the signature_check structure. This patch introduces a new configuration option: gpg.minTrustLevel. It consolidates trust-level verification to gpg-interface.c and adds a new `trust_level` member to the signature_check structure. Backward-compatibility is maintained by introducing a special case in verify_merge_signature() such that if no user-configurable gpg.minTrustLevel is set, then the old behavior of rejecting TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand, gpg.minTrustLevel is set, then that value overrides the old behavior. Similarly, the %G? format specifier will continue show 'U' for signatures made with a key that has a trust level of TRUST_UNDEFINED or TRUST_NEVER, even though the 'U' character no longer exist in the `result` member of the signature_check structure. A new format specifier, %GT, is also introduced for users that want to show all possible trust levels for a signature. Another approach would have been to simply drop the trust-level requirement in verify_merge_signature(). This would also have made the behavior consistent with other parts of git that perform signature verification. However, requiring a minimum trust level for signing keys does seem to have a real-world use-case. For example, the build system used by the Qubes OS project currently parses the raw output from verify-tag in order to assert a minimum trust level for keys used to sign git tags [2]. [1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master [2] https://github.com/QubesOS/qubes-builder/blob/9674c1991deef45b1a1b1c71fddfab14ba50dccf/scripts/verify-git-tag#L43 Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-27 14:55:57 +01:00
/* Do we have trust level? */
if (sigcheck_gpg_status[i].flags & GPG_STATUS_TRUST_LEVEL) {
/*
* GPG v1 and v2 differs in how the
* TRUST_ lines are written. Some
* trust lines contain no additional
* space-separated information for v1.
*/
size_t trust_size = strcspn(line, " \n");
char *trust = xmemdupz(line, trust_size);
if (parse_gpg_trust_level(trust, &sigc->trust_level)) {
free(trust);
goto error;
}
free(trust);
}
/* Do we have fingerprint? */
if (sigcheck_gpg_status[i].flags & GPG_STATUS_FINGERPRINT) {
gpg-interface: limit search for primary key fingerprint The VALIDSIG status line from GnuPG with --status-fd is documented to have 9 required and 1 optional fields [1]. The final, and optional, field is used to specify the fingerprint of the primary key that made the signature in case it was made by a subkey. However, this field is only available for OpenPGP signatures; not for CMS/X.509. If the VALIDSIG status line does not have the optional 10th field, the current code will continue reading onto the next status line. And this is the case for non-OpenPGP signatures [1]. The consequence is that a subsequent status line may be considered as the "primary key" for signatures that does not have an actual primary key. Limit the search of these 9 or 10 fields to the single line to avoid this problem. If the 10th field is missing, report that there is no primary key fingerprint. [Reference] [1] GnuPG Details, General status codes https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/DETAILS;h=6ce340e8c04794add995e84308bb3091450bd28f;hb=HEAD#l483 The documentation says: VALIDSIG <args> The args are: - <fingerprint_in_hex> - <sig_creation_date> - <sig-timestamp> - <expire-timestamp> - <sig-version> - <reserved> - <pubkey-algo> - <hash-algo> - <sig-class> - [ <primary-key-fpr> ] This status indicates that the signature is cryptographically valid. [...] PRIMARY-KEY-FPR is the fingerprint of the primary key or identical to the first argument. The primary-key-fpr parameter is used for OpenPGP and not available for CMS signatures. [...] Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-22 21:23:12 +01:00
const char *limit;
char **field;
next = strchrnul(line, ' ');
replace_cstring(&sigc->fingerprint, line, next);
gpg-interface: limit search for primary key fingerprint The VALIDSIG status line from GnuPG with --status-fd is documented to have 9 required and 1 optional fields [1]. The final, and optional, field is used to specify the fingerprint of the primary key that made the signature in case it was made by a subkey. However, this field is only available for OpenPGP signatures; not for CMS/X.509. If the VALIDSIG status line does not have the optional 10th field, the current code will continue reading onto the next status line. And this is the case for non-OpenPGP signatures [1]. The consequence is that a subsequent status line may be considered as the "primary key" for signatures that does not have an actual primary key. Limit the search of these 9 or 10 fields to the single line to avoid this problem. If the 10th field is missing, report that there is no primary key fingerprint. [Reference] [1] GnuPG Details, General status codes https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/DETAILS;h=6ce340e8c04794add995e84308bb3091450bd28f;hb=HEAD#l483 The documentation says: VALIDSIG <args> The args are: - <fingerprint_in_hex> - <sig_creation_date> - <sig-timestamp> - <expire-timestamp> - <sig-version> - <reserved> - <pubkey-algo> - <hash-algo> - <sig-class> - [ <primary-key-fpr> ] This status indicates that the signature is cryptographically valid. [...] PRIMARY-KEY-FPR is the fingerprint of the primary key or identical to the first argument. The primary-key-fpr parameter is used for OpenPGP and not available for CMS signatures. [...] Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-22 21:23:12 +01:00
/*
* Skip interim fields. The search is
* limited to the same line since only
* OpenPGP signatures has a field with
* the primary fingerprint.
*/
limit = strchrnul(line, '\n');
for (j = 9; j > 0; j--) {
gpg-interface: limit search for primary key fingerprint The VALIDSIG status line from GnuPG with --status-fd is documented to have 9 required and 1 optional fields [1]. The final, and optional, field is used to specify the fingerprint of the primary key that made the signature in case it was made by a subkey. However, this field is only available for OpenPGP signatures; not for CMS/X.509. If the VALIDSIG status line does not have the optional 10th field, the current code will continue reading onto the next status line. And this is the case for non-OpenPGP signatures [1]. The consequence is that a subsequent status line may be considered as the "primary key" for signatures that does not have an actual primary key. Limit the search of these 9 or 10 fields to the single line to avoid this problem. If the 10th field is missing, report that there is no primary key fingerprint. [Reference] [1] GnuPG Details, General status codes https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/DETAILS;h=6ce340e8c04794add995e84308bb3091450bd28f;hb=HEAD#l483 The documentation says: VALIDSIG <args> The args are: - <fingerprint_in_hex> - <sig_creation_date> - <sig-timestamp> - <expire-timestamp> - <sig-version> - <reserved> - <pubkey-algo> - <hash-algo> - <sig-class> - [ <primary-key-fpr> ] This status indicates that the signature is cryptographically valid. [...] PRIMARY-KEY-FPR is the fingerprint of the primary key or identical to the first argument. The primary-key-fpr parameter is used for OpenPGP and not available for CMS signatures. [...] Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-22 21:23:12 +01:00
if (!*next || limit <= next)
break;
line = next + 1;
next = strchrnul(line, ' ');
}
gpg-interface: limit search for primary key fingerprint The VALIDSIG status line from GnuPG with --status-fd is documented to have 9 required and 1 optional fields [1]. The final, and optional, field is used to specify the fingerprint of the primary key that made the signature in case it was made by a subkey. However, this field is only available for OpenPGP signatures; not for CMS/X.509. If the VALIDSIG status line does not have the optional 10th field, the current code will continue reading onto the next status line. And this is the case for non-OpenPGP signatures [1]. The consequence is that a subsequent status line may be considered as the "primary key" for signatures that does not have an actual primary key. Limit the search of these 9 or 10 fields to the single line to avoid this problem. If the 10th field is missing, report that there is no primary key fingerprint. [Reference] [1] GnuPG Details, General status codes https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/DETAILS;h=6ce340e8c04794add995e84308bb3091450bd28f;hb=HEAD#l483 The documentation says: VALIDSIG <args> The args are: - <fingerprint_in_hex> - <sig_creation_date> - <sig-timestamp> - <expire-timestamp> - <sig-version> - <reserved> - <pubkey-algo> - <hash-algo> - <sig-class> - [ <primary-key-fpr> ] This status indicates that the signature is cryptographically valid. [...] PRIMARY-KEY-FPR is the fingerprint of the primary key or identical to the first argument. The primary-key-fpr parameter is used for OpenPGP and not available for CMS signatures. [...] Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-22 21:23:12 +01:00
field = &sigc->primary_key_fingerprint;
if (!j) {
next = strchrnul(line, '\n');
replace_cstring(field, line, next);
} else {
replace_cstring(field, NULL, NULL);
}
}
break;
}
}
}
return;
gpg-interface: add minTrustLevel as a configuration option Previously, signature verification for merge and pull operations checked if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in verify_merge_signature(). If that was the case, the process die()d. The other code paths that did signature verification relied entirely on the return code from check_commit_signature(). And signatures made with a good key, irregardless of its trust level, was considered valid by check_commit_signature(). This difference in behavior might induce users to erroneously assume that the trust level of a key in their keyring is always considered by Git, even for operations where it is not (e.g. during a verify-commit or verify-tag). The way it worked was by gpg-interface.c storing the result from the key/signature status *and* the lowest-two trust levels in the `result` member of the signature_check structure (the last of these status lines that were encountered got written to `result`). These are documented in GPG under the subsection `General status codes` and `Key related`, respectively [1]. The GPG documentation says the following on the TRUST_ status codes [1]: """ These are several similar status codes: - TRUST_UNDEFINED <error_token> - TRUST_NEVER <error_token> - TRUST_MARGINAL [0 [<validation_model>]] - TRUST_FULLY [0 [<validation_model>]] - TRUST_ULTIMATE [0 [<validation_model>]] For good signatures one of these status lines are emitted to indicate the validity of the key used to create the signature. The error token values are currently only emitted by gpgsm. """ My interpretation is that the trust level is conceptionally different from the validity of the key and/or signature. That seems to also have been the assumption of the old code in check_signature() where a result of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED) were both considered a success. The two cases where a result of 'U' had special meaning were in verify_merge_signature() (where this caused git to die()) and in format_commit_one() (where it affected the output of the %G? format specifier). I think it makes sense to refactor the processing of TRUST_ status lines such that users can configure a minimum trust level that is enforced globally, rather than have individual parts of git (e.g. merge) do it themselves (except for a grace period with backward compatibility). I also think it makes sense to not store the trust level in the same struct member as the key/signature status. While the presence of a TRUST_ status code does imply that the signature is good (see the first paragraph in the included snippet above), as far as I can tell, the order of the status lines from GPG isn't well-defined; thus it would seem plausible that the trust level could be overwritten with the key/signature status if they were stored in the same member of the signature_check structure. This patch introduces a new configuration option: gpg.minTrustLevel. It consolidates trust-level verification to gpg-interface.c and adds a new `trust_level` member to the signature_check structure. Backward-compatibility is maintained by introducing a special case in verify_merge_signature() such that if no user-configurable gpg.minTrustLevel is set, then the old behavior of rejecting TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand, gpg.minTrustLevel is set, then that value overrides the old behavior. Similarly, the %G? format specifier will continue show 'U' for signatures made with a key that has a trust level of TRUST_UNDEFINED or TRUST_NEVER, even though the 'U' character no longer exist in the `result` member of the signature_check structure. A new format specifier, %GT, is also introduced for users that want to show all possible trust levels for a signature. Another approach would have been to simply drop the trust-level requirement in verify_merge_signature(). This would also have made the behavior consistent with other parts of git that perform signature verification. However, requiring a minimum trust level for signing keys does seem to have a real-world use-case. For example, the build system used by the Qubes OS project currently parses the raw output from verify-tag in order to assert a minimum trust level for keys used to sign git tags [2]. [1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master [2] https://github.com/QubesOS/qubes-builder/blob/9674c1991deef45b1a1b1c71fddfab14ba50dccf/scripts/verify-git-tag#L43 Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-27 14:55:57 +01:00
error:
sigc->result = 'E';
/* Clear partial data to avoid confusion */
FREE_AND_NULL(sigc->primary_key_fingerprint);
FREE_AND_NULL(sigc->fingerprint);
FREE_AND_NULL(sigc->signer);
FREE_AND_NULL(sigc->key);
}
gpg-interface: prefer check_signature() for GPG verification This commit refactors the use of verify_signed_buffer() outside of gpg-interface.c to use check_signature() instead. It also turns verify_signed_buffer() into a file-local function since it's now only invoked internally by check_signature(). There were previously two globally scoped functions used in different parts of Git to perform GPG signature verification: verify_signed_buffer() and check_signature(). Now only check_signature() is used. The verify_signed_buffer() function doesn't guard against duplicate signatures as described by Michał Górny [1]. Instead it only ensures a non-erroneous exit code from GPG and the presence of at least one GOODSIG status field. This stands in contrast with check_signature() that returns an error if more than one signature is encountered. The lower degree of verification makes the use of verify_signed_buffer() problematic if callers don't parse and validate the various parts of the GPG status message themselves. And processing these messages seems like a task that should be reserved to gpg-interface.c with the function check_signature(). Furthermore, the use of verify_signed_buffer() makes it difficult to introduce new functionality that relies on the content of the GPG status lines. Now all operations that does signature verification share a single entry point to gpg-interface.c. This makes it easier to propagate changed or additional functionality in GPG signature verification to all parts of Git, without having odd edge-cases that don't perform the same degree of verification. [1] https://dev.gentoo.org/~mgorny/articles/attack-on-git-signature-verification.html Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-03-04 12:48:04 +01:00
static int verify_signed_buffer(const char *payload, size_t payload_size,
const char *signature, size_t signature_size,
struct strbuf *gpg_output,
struct strbuf *gpg_status)
{
struct child_process gpg = CHILD_PROCESS_INIT;
struct gpg_format *fmt;
struct tempfile *temp;
int ret;
struct strbuf buf = STRBUF_INIT;
temp = mks_tempfile_t(".git_vtag_tmpXXXXXX");
if (!temp)
return error_errno(_("could not create temporary file"));
if (write_in_full(temp->fd, signature, signature_size) < 0 ||
close_tempfile_gently(temp) < 0) {
error_errno(_("failed writing detached signature to '%s'"),
temp->filename.buf);
delete_tempfile(&temp);
return -1;
}
fmt = get_format_by_sig(signature);
if (!fmt)
BUG("bad signature '%s'", signature);
strvec_push(&gpg.args, fmt->program);
strvec_pushv(&gpg.args, fmt->verify_args);
strvec_pushl(&gpg.args,
"--status-fd=1",
"--verify", temp->filename.buf, "-",
NULL);
gpg-interface: prefer check_signature() for GPG verification This commit refactors the use of verify_signed_buffer() outside of gpg-interface.c to use check_signature() instead. It also turns verify_signed_buffer() into a file-local function since it's now only invoked internally by check_signature(). There were previously two globally scoped functions used in different parts of Git to perform GPG signature verification: verify_signed_buffer() and check_signature(). Now only check_signature() is used. The verify_signed_buffer() function doesn't guard against duplicate signatures as described by Michał Górny [1]. Instead it only ensures a non-erroneous exit code from GPG and the presence of at least one GOODSIG status field. This stands in contrast with check_signature() that returns an error if more than one signature is encountered. The lower degree of verification makes the use of verify_signed_buffer() problematic if callers don't parse and validate the various parts of the GPG status message themselves. And processing these messages seems like a task that should be reserved to gpg-interface.c with the function check_signature(). Furthermore, the use of verify_signed_buffer() makes it difficult to introduce new functionality that relies on the content of the GPG status lines. Now all operations that does signature verification share a single entry point to gpg-interface.c. This makes it easier to propagate changed or additional functionality in GPG signature verification to all parts of Git, without having odd edge-cases that don't perform the same degree of verification. [1] https://dev.gentoo.org/~mgorny/articles/attack-on-git-signature-verification.html Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-03-04 12:48:04 +01:00
if (!gpg_status)
gpg_status = &buf;
sigchain_push(SIGPIPE, SIG_IGN);
ret = pipe_command(&gpg, payload, payload_size,
gpg_status, 0, gpg_output, 0);
sigchain_pop(SIGPIPE);
delete_tempfile(&temp);
ret |= !strstr(gpg_status->buf, "\n[GNUPG:] GOODSIG ");
strbuf_release(&buf); /* no matter it was used or not */
return ret;
}
int check_signature(const char *payload, size_t plen, const char *signature,
size_t slen, struct signature_check *sigc)
{
struct strbuf gpg_output = STRBUF_INIT;
struct strbuf gpg_status = STRBUF_INIT;
int status;
sigc->result = 'N';
gpg-interface: add minTrustLevel as a configuration option Previously, signature verification for merge and pull operations checked if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in verify_merge_signature(). If that was the case, the process die()d. The other code paths that did signature verification relied entirely on the return code from check_commit_signature(). And signatures made with a good key, irregardless of its trust level, was considered valid by check_commit_signature(). This difference in behavior might induce users to erroneously assume that the trust level of a key in their keyring is always considered by Git, even for operations where it is not (e.g. during a verify-commit or verify-tag). The way it worked was by gpg-interface.c storing the result from the key/signature status *and* the lowest-two trust levels in the `result` member of the signature_check structure (the last of these status lines that were encountered got written to `result`). These are documented in GPG under the subsection `General status codes` and `Key related`, respectively [1]. The GPG documentation says the following on the TRUST_ status codes [1]: """ These are several similar status codes: - TRUST_UNDEFINED <error_token> - TRUST_NEVER <error_token> - TRUST_MARGINAL [0 [<validation_model>]] - TRUST_FULLY [0 [<validation_model>]] - TRUST_ULTIMATE [0 [<validation_model>]] For good signatures one of these status lines are emitted to indicate the validity of the key used to create the signature. The error token values are currently only emitted by gpgsm. """ My interpretation is that the trust level is conceptionally different from the validity of the key and/or signature. That seems to also have been the assumption of the old code in check_signature() where a result of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED) were both considered a success. The two cases where a result of 'U' had special meaning were in verify_merge_signature() (where this caused git to die()) and in format_commit_one() (where it affected the output of the %G? format specifier). I think it makes sense to refactor the processing of TRUST_ status lines such that users can configure a minimum trust level that is enforced globally, rather than have individual parts of git (e.g. merge) do it themselves (except for a grace period with backward compatibility). I also think it makes sense to not store the trust level in the same struct member as the key/signature status. While the presence of a TRUST_ status code does imply that the signature is good (see the first paragraph in the included snippet above), as far as I can tell, the order of the status lines from GPG isn't well-defined; thus it would seem plausible that the trust level could be overwritten with the key/signature status if they were stored in the same member of the signature_check structure. This patch introduces a new configuration option: gpg.minTrustLevel. It consolidates trust-level verification to gpg-interface.c and adds a new `trust_level` member to the signature_check structure. Backward-compatibility is maintained by introducing a special case in verify_merge_signature() such that if no user-configurable gpg.minTrustLevel is set, then the old behavior of rejecting TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand, gpg.minTrustLevel is set, then that value overrides the old behavior. Similarly, the %G? format specifier will continue show 'U' for signatures made with a key that has a trust level of TRUST_UNDEFINED or TRUST_NEVER, even though the 'U' character no longer exist in the `result` member of the signature_check structure. A new format specifier, %GT, is also introduced for users that want to show all possible trust levels for a signature. Another approach would have been to simply drop the trust-level requirement in verify_merge_signature(). This would also have made the behavior consistent with other parts of git that perform signature verification. However, requiring a minimum trust level for signing keys does seem to have a real-world use-case. For example, the build system used by the Qubes OS project currently parses the raw output from verify-tag in order to assert a minimum trust level for keys used to sign git tags [2]. [1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master [2] https://github.com/QubesOS/qubes-builder/blob/9674c1991deef45b1a1b1c71fddfab14ba50dccf/scripts/verify-git-tag#L43 Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-27 14:55:57 +01:00
sigc->trust_level = -1;
status = verify_signed_buffer(payload, plen, signature, slen,
&gpg_output, &gpg_status);
if (status && !gpg_output.len)
goto out;
sigc->payload = xmemdupz(payload, plen);
sigc->gpg_output = strbuf_detach(&gpg_output, NULL);
sigc->gpg_status = strbuf_detach(&gpg_status, NULL);
parse_gpg_output(sigc);
gpg-interface: add minTrustLevel as a configuration option Previously, signature verification for merge and pull operations checked if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in verify_merge_signature(). If that was the case, the process die()d. The other code paths that did signature verification relied entirely on the return code from check_commit_signature(). And signatures made with a good key, irregardless of its trust level, was considered valid by check_commit_signature(). This difference in behavior might induce users to erroneously assume that the trust level of a key in their keyring is always considered by Git, even for operations where it is not (e.g. during a verify-commit or verify-tag). The way it worked was by gpg-interface.c storing the result from the key/signature status *and* the lowest-two trust levels in the `result` member of the signature_check structure (the last of these status lines that were encountered got written to `result`). These are documented in GPG under the subsection `General status codes` and `Key related`, respectively [1]. The GPG documentation says the following on the TRUST_ status codes [1]: """ These are several similar status codes: - TRUST_UNDEFINED <error_token> - TRUST_NEVER <error_token> - TRUST_MARGINAL [0 [<validation_model>]] - TRUST_FULLY [0 [<validation_model>]] - TRUST_ULTIMATE [0 [<validation_model>]] For good signatures one of these status lines are emitted to indicate the validity of the key used to create the signature. The error token values are currently only emitted by gpgsm. """ My interpretation is that the trust level is conceptionally different from the validity of the key and/or signature. That seems to also have been the assumption of the old code in check_signature() where a result of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED) were both considered a success. The two cases where a result of 'U' had special meaning were in verify_merge_signature() (where this caused git to die()) and in format_commit_one() (where it affected the output of the %G? format specifier). I think it makes sense to refactor the processing of TRUST_ status lines such that users can configure a minimum trust level that is enforced globally, rather than have individual parts of git (e.g. merge) do it themselves (except for a grace period with backward compatibility). I also think it makes sense to not store the trust level in the same struct member as the key/signature status. While the presence of a TRUST_ status code does imply that the signature is good (see the first paragraph in the included snippet above), as far as I can tell, the order of the status lines from GPG isn't well-defined; thus it would seem plausible that the trust level could be overwritten with the key/signature status if they were stored in the same member of the signature_check structure. This patch introduces a new configuration option: gpg.minTrustLevel. It consolidates trust-level verification to gpg-interface.c and adds a new `trust_level` member to the signature_check structure. Backward-compatibility is maintained by introducing a special case in verify_merge_signature() such that if no user-configurable gpg.minTrustLevel is set, then the old behavior of rejecting TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand, gpg.minTrustLevel is set, then that value overrides the old behavior. Similarly, the %G? format specifier will continue show 'U' for signatures made with a key that has a trust level of TRUST_UNDEFINED or TRUST_NEVER, even though the 'U' character no longer exist in the `result` member of the signature_check structure. A new format specifier, %GT, is also introduced for users that want to show all possible trust levels for a signature. Another approach would have been to simply drop the trust-level requirement in verify_merge_signature(). This would also have made the behavior consistent with other parts of git that perform signature verification. However, requiring a minimum trust level for signing keys does seem to have a real-world use-case. For example, the build system used by the Qubes OS project currently parses the raw output from verify-tag in order to assert a minimum trust level for keys used to sign git tags [2]. [1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master [2] https://github.com/QubesOS/qubes-builder/blob/9674c1991deef45b1a1b1c71fddfab14ba50dccf/scripts/verify-git-tag#L43 Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-27 14:55:57 +01:00
status |= sigc->result != 'G';
status |= sigc->trust_level < configured_min_trust_level;
out:
strbuf_release(&gpg_status);
strbuf_release(&gpg_output);
gpg-interface: propagate exit status from gpg back to the callers When gpg-interface API unified support for signature verification codepaths for signed tags and signed commits in mid 2015 at around v2.6.0-rc0~114, we accidentally loosened the GPG signature verification. Before that change, signed commits were verified by looking for "G"ood signature from GPG, while ignoring the exit status of "gpg --verify" process, while signed tags were verified by simply passing the exit status of "gpg --verify" through. The unified code we currently have ignores the exit status of "gpg --verify" and returns successful verification when the signature matches an unexpired key regardless of the trust placed on the key (i.e. in addition to "G"ood ones, we accept "U"ntrusted ones). Make these commands signal failure with their exit status when underlying "gpg --verify" (or the custom command specified by "gpg.program" configuration variable) does so. This essentially changes their behaviour in a backward incompatible way to reject signatures that have been made with untrusted keys even if they correctly verify, as that is how "gpg --verify" behaves. Note that the code still overrides a zero exit status obtained from "gpg" (or gpg.program) if the output does not say the signature is good or computes correctly but made with untrusted keys, to catch a poorly written wrapper around "gpg" the user may give us. We could exclude "U"ntrusted support from this fallback code, but that would be making two backward incompatible changes in a single commit, so let's avoid that for now. A follow-up change could do so if desired. Helped-by: Vojtech Myslivec <vojtech.myslivec@nic.cz> Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-09 20:40:27 +02:00
return !!status;
}
void print_signature_buffer(const struct signature_check *sigc, unsigned flags)
{
const char *output = flags & GPG_VERIFY_RAW ?
sigc->gpg_status : sigc->gpg_output;
if (flags & GPG_VERIFY_VERBOSE && sigc->payload)
fputs(sigc->payload, stdout);
if (output)
fputs(output, stderr);
}
size_t parse_signature(const char *buf, size_t size)
{
size_t len = 0;
size_t match = size;
while (len < size) {
const char *eol;
if (get_format_by_sig(buf + len))
match = len;
eol = memchr(buf + len, '\n', size - len);
len += eol ? eol - (buf + len) + 1 : size - len;
}
return match;
}
void set_signing_key(const char *key)
{
free(configured_signing_key);
configured_signing_key = xstrdup(key);
}
int git_gpg_config(const char *var, const char *value, void *cb)
{
struct gpg_format *fmt = NULL;
char *fmtname = NULL;
gpg-interface: add minTrustLevel as a configuration option Previously, signature verification for merge and pull operations checked if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in verify_merge_signature(). If that was the case, the process die()d. The other code paths that did signature verification relied entirely on the return code from check_commit_signature(). And signatures made with a good key, irregardless of its trust level, was considered valid by check_commit_signature(). This difference in behavior might induce users to erroneously assume that the trust level of a key in their keyring is always considered by Git, even for operations where it is not (e.g. during a verify-commit or verify-tag). The way it worked was by gpg-interface.c storing the result from the key/signature status *and* the lowest-two trust levels in the `result` member of the signature_check structure (the last of these status lines that were encountered got written to `result`). These are documented in GPG under the subsection `General status codes` and `Key related`, respectively [1]. The GPG documentation says the following on the TRUST_ status codes [1]: """ These are several similar status codes: - TRUST_UNDEFINED <error_token> - TRUST_NEVER <error_token> - TRUST_MARGINAL [0 [<validation_model>]] - TRUST_FULLY [0 [<validation_model>]] - TRUST_ULTIMATE [0 [<validation_model>]] For good signatures one of these status lines are emitted to indicate the validity of the key used to create the signature. The error token values are currently only emitted by gpgsm. """ My interpretation is that the trust level is conceptionally different from the validity of the key and/or signature. That seems to also have been the assumption of the old code in check_signature() where a result of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED) were both considered a success. The two cases where a result of 'U' had special meaning were in verify_merge_signature() (where this caused git to die()) and in format_commit_one() (where it affected the output of the %G? format specifier). I think it makes sense to refactor the processing of TRUST_ status lines such that users can configure a minimum trust level that is enforced globally, rather than have individual parts of git (e.g. merge) do it themselves (except for a grace period with backward compatibility). I also think it makes sense to not store the trust level in the same struct member as the key/signature status. While the presence of a TRUST_ status code does imply that the signature is good (see the first paragraph in the included snippet above), as far as I can tell, the order of the status lines from GPG isn't well-defined; thus it would seem plausible that the trust level could be overwritten with the key/signature status if they were stored in the same member of the signature_check structure. This patch introduces a new configuration option: gpg.minTrustLevel. It consolidates trust-level verification to gpg-interface.c and adds a new `trust_level` member to the signature_check structure. Backward-compatibility is maintained by introducing a special case in verify_merge_signature() such that if no user-configurable gpg.minTrustLevel is set, then the old behavior of rejecting TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand, gpg.minTrustLevel is set, then that value overrides the old behavior. Similarly, the %G? format specifier will continue show 'U' for signatures made with a key that has a trust level of TRUST_UNDEFINED or TRUST_NEVER, even though the 'U' character no longer exist in the `result` member of the signature_check structure. A new format specifier, %GT, is also introduced for users that want to show all possible trust levels for a signature. Another approach would have been to simply drop the trust-level requirement in verify_merge_signature(). This would also have made the behavior consistent with other parts of git that perform signature verification. However, requiring a minimum trust level for signing keys does seem to have a real-world use-case. For example, the build system used by the Qubes OS project currently parses the raw output from verify-tag in order to assert a minimum trust level for keys used to sign git tags [2]. [1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master [2] https://github.com/QubesOS/qubes-builder/blob/9674c1991deef45b1a1b1c71fddfab14ba50dccf/scripts/verify-git-tag#L43 Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-27 14:55:57 +01:00
char *trust;
int ret;
if (!strcmp(var, "user.signingkey")) {
if (!value)
return config_error_nonbool(var);
set_signing_key(value);
return 0;
}
if (!strcmp(var, "gpg.format")) {
if (!value)
return config_error_nonbool(var);
fmt = get_format_by_name(value);
if (!fmt)
return error("unsupported value for %s: %s",
var, value);
use_format = fmt;
return 0;
}
gpg-interface: add minTrustLevel as a configuration option Previously, signature verification for merge and pull operations checked if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in verify_merge_signature(). If that was the case, the process die()d. The other code paths that did signature verification relied entirely on the return code from check_commit_signature(). And signatures made with a good key, irregardless of its trust level, was considered valid by check_commit_signature(). This difference in behavior might induce users to erroneously assume that the trust level of a key in their keyring is always considered by Git, even for operations where it is not (e.g. during a verify-commit or verify-tag). The way it worked was by gpg-interface.c storing the result from the key/signature status *and* the lowest-two trust levels in the `result` member of the signature_check structure (the last of these status lines that were encountered got written to `result`). These are documented in GPG under the subsection `General status codes` and `Key related`, respectively [1]. The GPG documentation says the following on the TRUST_ status codes [1]: """ These are several similar status codes: - TRUST_UNDEFINED <error_token> - TRUST_NEVER <error_token> - TRUST_MARGINAL [0 [<validation_model>]] - TRUST_FULLY [0 [<validation_model>]] - TRUST_ULTIMATE [0 [<validation_model>]] For good signatures one of these status lines are emitted to indicate the validity of the key used to create the signature. The error token values are currently only emitted by gpgsm. """ My interpretation is that the trust level is conceptionally different from the validity of the key and/or signature. That seems to also have been the assumption of the old code in check_signature() where a result of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED) were both considered a success. The two cases where a result of 'U' had special meaning were in verify_merge_signature() (where this caused git to die()) and in format_commit_one() (where it affected the output of the %G? format specifier). I think it makes sense to refactor the processing of TRUST_ status lines such that users can configure a minimum trust level that is enforced globally, rather than have individual parts of git (e.g. merge) do it themselves (except for a grace period with backward compatibility). I also think it makes sense to not store the trust level in the same struct member as the key/signature status. While the presence of a TRUST_ status code does imply that the signature is good (see the first paragraph in the included snippet above), as far as I can tell, the order of the status lines from GPG isn't well-defined; thus it would seem plausible that the trust level could be overwritten with the key/signature status if they were stored in the same member of the signature_check structure. This patch introduces a new configuration option: gpg.minTrustLevel. It consolidates trust-level verification to gpg-interface.c and adds a new `trust_level` member to the signature_check structure. Backward-compatibility is maintained by introducing a special case in verify_merge_signature() such that if no user-configurable gpg.minTrustLevel is set, then the old behavior of rejecting TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand, gpg.minTrustLevel is set, then that value overrides the old behavior. Similarly, the %G? format specifier will continue show 'U' for signatures made with a key that has a trust level of TRUST_UNDEFINED or TRUST_NEVER, even though the 'U' character no longer exist in the `result` member of the signature_check structure. A new format specifier, %GT, is also introduced for users that want to show all possible trust levels for a signature. Another approach would have been to simply drop the trust-level requirement in verify_merge_signature(). This would also have made the behavior consistent with other parts of git that perform signature verification. However, requiring a minimum trust level for signing keys does seem to have a real-world use-case. For example, the build system used by the Qubes OS project currently parses the raw output from verify-tag in order to assert a minimum trust level for keys used to sign git tags [2]. [1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master [2] https://github.com/QubesOS/qubes-builder/blob/9674c1991deef45b1a1b1c71fddfab14ba50dccf/scripts/verify-git-tag#L43 Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-27 14:55:57 +01:00
if (!strcmp(var, "gpg.mintrustlevel")) {
if (!value)
return config_error_nonbool(var);
trust = xstrdup_toupper(value);
ret = parse_gpg_trust_level(trust, &configured_min_trust_level);
free(trust);
if (ret)
return error("unsupported value for %s: %s", var,
value);
return 0;
}
if (!strcmp(var, "gpg.program") || !strcmp(var, "gpg.openpgp.program"))
fmtname = "openpgp";
if (!strcmp(var, "gpg.x509.program"))
fmtname = "x509";
if (fmtname) {
fmt = get_format_by_name(fmtname);
return git_config_string(&fmt->program, var, value);
}
return 0;
}
const char *get_signing_key(void)
{
if (configured_signing_key)
return configured_signing_key;
return git_committer_info(IDENT_STRICT|IDENT_NO_DATE);
}
int sign_buffer(struct strbuf *buffer, struct strbuf *signature, const char *signing_key)
{
struct child_process gpg = CHILD_PROCESS_INIT;
int ret;
size_t i, j, bottom;
struct strbuf gpg_status = STRBUF_INIT;
strvec_pushl(&gpg.args,
use_format->program,
"--status-fd=2",
"-bsau", signing_key,
NULL);
bottom = signature->len;
/*
* When the username signingkey is bad, program could be terminated
* because gpg exits without reading and then write gets SIGPIPE.
*/
sigchain_push(SIGPIPE, SIG_IGN);
ret = pipe_command(&gpg, buffer->buf, buffer->len,
signature, 1024, &gpg_status, 0);
sigchain_pop(SIGPIPE);
ret |= !strstr(gpg_status.buf, "\n[GNUPG:] SIG_CREATED ");
strbuf_release(&gpg_status);
if (ret)
return error(_("gpg failed to sign the data"));
/* Strip CR from the line endings, in case we are on Windows. */
for (i = j = bottom; i < signature->len; i++)
if (signature->buf[i] != '\r') {
if (i != j)
signature->buf[j] = signature->buf[i];
j++;
}
strbuf_setlen(signature, j);
return 0;
}