undef/git-commit-vandalism
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2c0ab4d49d
git-commit-vandalism/t/t4008-diff-break-rewrite.sh

189 lines
6.1 KiB
Bash
Raw Normal View History

[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
#!/bin/sh
#
# Copyright (c) 2005 Junio C Hamano
#
test_description='Break and then rename
We have two very different files, file0 and file1, registered in a tree.
We update file1 so drastically that it is more similar to file0, and
then remove file0. With -B, changes to file1 should be broken into
separate delete and create, resulting in removal of file0, removal of
t4008: correct stale comments A complete rewrite of a single file was originally designed to be expressed as a deletion immediately followed by a creation of the same file, and the comments in the test updated here were written to reflect that design decision made in f345b0a0 (Add -B flag to diff-* brothers., 2005-05-30). However, we later realized that a complete rewrite is merely how a textual diff should be represented at 366175ef (Rework -B output., 2005-06-19), and updated the actual tests. But we forgot to update the introductory text while doing so. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-02-15 21:42:59 +01:00
original file1 and creation of completely rewritten file1. The latter
two are then merged back into a single "complete rewrite".
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
Further, with -B and -M together, these three modifications should
turn into rename-edit of file0 into file1.
Starting from the same two files in the tree, we swap file0 and file1.
t4008: correct stale comments A complete rewrite of a single file was originally designed to be expressed as a deletion immediately followed by a creation of the same file, and the comments in the test updated here were written to reflect that design decision made in f345b0a0 (Add -B flag to diff-* brothers., 2005-05-30). However, we later realized that a complete rewrite is merely how a textual diff should be represented at 366175ef (Rework -B output., 2005-06-19), and updated the actual tests. But we forgot to update the introductory text while doing so. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-02-15 21:42:59 +01:00
With -B, this should be detected as two complete rewrites.
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
Further, with -B and -M together, these should turn into two renames.
'
. ./test-lib.sh
tests: use $TEST_DIRECTORY to refer to the t/ directory Many test scripts assumed that they will start in a 'trash' subdirectory that is a single level down from the t/ directory, and referred to their test vector files by asking for files like "../t9999/expect". This will break if we move the 'trash' subdirectory elsewhere. To solve this, we earlier introduced "$TEST_DIRECTORY" so that they can refer to t/ directory reliably. This finally makes all the tests use it to refer to the outside environment. With this patch, and a one-liner not included here (because it would contradict with what Dscho really wants to do): | diff --git a/t/test-lib.sh b/t/test-lib.sh | index 70ea7e0..60e69e4 100644 | --- a/t/test-lib.sh | +++ b/t/test-lib.sh | @@ -485,7 +485,7 @@ fi | . ../GIT-BUILD-OPTIONS | | # Test repository | -test="trash directory" | +test="trash directory/another level/yet another" | rm -fr "$test" || { | trap - exit | echo >&5 "FATAL: Cannot prepare test area" all the tests still pass, but we would want extra sets of eyeballs on this type of change to really make sure. [jc: with help from Stephan Beyer on http-push tests I do not run myself; credits for locating silly quoting errors go to Olivier Marin.] Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-08 11:26:28 +02:00
. "$TEST_DIRECTORY"/diff-lib.sh ;# test-lib chdir's into trash
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
test_expect_success \
setup \
tests: use $TEST_DIRECTORY to refer to the t/ directory Many test scripts assumed that they will start in a 'trash' subdirectory that is a single level down from the t/ directory, and referred to their test vector files by asking for files like "../t9999/expect". This will break if we move the 'trash' subdirectory elsewhere. To solve this, we earlier introduced "$TEST_DIRECTORY" so that they can refer to t/ directory reliably. This finally makes all the tests use it to refer to the outside environment. With this patch, and a one-liner not included here (because it would contradict with what Dscho really wants to do): | diff --git a/t/test-lib.sh b/t/test-lib.sh | index 70ea7e0..60e69e4 100644 | --- a/t/test-lib.sh | +++ b/t/test-lib.sh | @@ -485,7 +485,7 @@ fi | . ../GIT-BUILD-OPTIONS | | # Test repository | -test="trash directory" | +test="trash directory/another level/yet another" | rm -fr "$test" || { | trap - exit | echo >&5 "FATAL: Cannot prepare test area" all the tests still pass, but we would want extra sets of eyeballs on this type of change to really make sure. [jc: with help from Stephan Beyer on http-push tests I do not run myself; credits for locating silly quoting errors go to Olivier Marin.] Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-08 11:26:28 +02:00
'cat "$TEST_DIRECTORY"/../README >file0 &&
cat "$TEST_DIRECTORY"/../COPYING >file1 &&
Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-03 07:52:14 +02:00
git update-index --add file0 file1 &&
tree=$(git write-tree) &&
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
echo "$tree"'
test_expect_success \
'change file1 with copy-edit of file0 and remove file0' \
'sed -e "s/git/GIT/" file0 >file1 &&
rm -f file0 &&
Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-03 07:52:14 +02:00
git update-index --remove file0 file1'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
test_expect_success \
'run diff with -B' \
Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-03 07:52:14 +02:00
'git diff-index -B --cached "$tree" >current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
cat >expected <<\EOF
:100644 000000 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 0000000000000000000000000000000000000000 D file0
[PATCH] Rework -B output. Patch for a completely rewritten file detected by the -B flag was shown as a pair of creation followed by deletion in earlier versions. This was an misguided attempt to make reviewing such a complete rewrite easier, and unnecessarily ended up confusing git-apply. Instead, show the entire contents of old version prefixed with '-', followed by the entire contents of new version prefixed with '+'. This gives the same easy-to-review for human consumer while keeping it a single, regular modification patch for machine consumption, something that even GNU patch can grok. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-19 22:17:50 +02:00
:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 11e331465a89c394dc25c780de230043750c1ec8 M100 file1
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
EOF
test_expect_success \
'validate result of -B (#1)' \
[PATCH] Rework -B output. Patch for a completely rewritten file detected by the -B flag was shown as a pair of creation followed by deletion in earlier versions. This was an misguided attempt to make reviewing such a complete rewrite easier, and unnecessarily ended up confusing git-apply. Instead, show the entire contents of old version prefixed with '-', followed by the entire contents of new version prefixed with '+'. This gives the same easy-to-review for human consumer while keeping it a single, regular modification patch for machine consumption, something that even GNU patch can grok. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-19 22:17:50 +02:00
'compare_diff_raw expected current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
test_expect_success \
'run diff with -B and -M' \
Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-03 07:52:14 +02:00
'git diff-index -B -M "$tree" >current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
cat >expected <<\EOF
:100644 100644 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 08bb2fb671deff4c03a4d4a0a1315dff98d5732c R100 file0 file1
EOF
test_expect_success \
'validate result of -B -M (#2)' \
[PATCH] Rework -B output. Patch for a completely rewritten file detected by the -B flag was shown as a pair of creation followed by deletion in earlier versions. This was an misguided attempt to make reviewing such a complete rewrite easier, and unnecessarily ended up confusing git-apply. Instead, show the entire contents of old version prefixed with '-', followed by the entire contents of new version prefixed with '+'. This gives the same easy-to-review for human consumer while keeping it a single, regular modification patch for machine consumption, something that even GNU patch can grok. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-19 22:17:50 +02:00
'compare_diff_raw expected current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
test_expect_success \
'swap file0 and file1' \
'rm -f file0 file1 &&
Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-03 07:52:14 +02:00
git read-tree -m $tree &&
git checkout-index -f -u -a &&
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
mv file0 tmp &&
mv file1 file0 &&
mv tmp file1 &&
Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-03 07:52:14 +02:00
git update-index file0 file1'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
test_expect_success \
'run diff with -B' \
Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-03 07:52:14 +02:00
'git diff-index -B "$tree" >current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
cat >expected <<\EOF
[PATCH] Rework -B output. Patch for a completely rewritten file detected by the -B flag was shown as a pair of creation followed by deletion in earlier versions. This was an misguided attempt to make reviewing such a complete rewrite easier, and unnecessarily ended up confusing git-apply. Instead, show the entire contents of old version prefixed with '-', followed by the entire contents of new version prefixed with '+'. This gives the same easy-to-review for human consumer while keeping it a single, regular modification patch for machine consumption, something that even GNU patch can grok. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-19 22:17:50 +02:00
:100644 100644 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 6ff87c4664981e4397625791c8ea3bbb5f2279a3 M100 file0
:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 M100 file1
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
EOF
test_expect_success \
'validate result of -B (#3)' \
[PATCH] Rework -B output. Patch for a completely rewritten file detected by the -B flag was shown as a pair of creation followed by deletion in earlier versions. This was an misguided attempt to make reviewing such a complete rewrite easier, and unnecessarily ended up confusing git-apply. Instead, show the entire contents of old version prefixed with '-', followed by the entire contents of new version prefixed with '+'. This gives the same easy-to-review for human consumer while keeping it a single, regular modification patch for machine consumption, something that even GNU patch can grok. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-19 22:17:50 +02:00
'compare_diff_raw expected current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
test_expect_success \
'run diff with -B and -M' \
Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-03 07:52:14 +02:00
'git diff-index -B -M "$tree" >current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
cat >expected <<\EOF
:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 6ff87c4664981e4397625791c8ea3bbb5f2279a3 R100 file1 file0
:100644 100644 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 R100 file0 file1
EOF
test_expect_success \
'validate result of -B -M (#4)' \
[PATCH] Rework -B output. Patch for a completely rewritten file detected by the -B flag was shown as a pair of creation followed by deletion in earlier versions. This was an misguided attempt to make reviewing such a complete rewrite easier, and unnecessarily ended up confusing git-apply. Instead, show the entire contents of old version prefixed with '-', followed by the entire contents of new version prefixed with '+'. This gives the same easy-to-review for human consumer while keeping it a single, regular modification patch for machine consumption, something that even GNU patch can grok. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-19 22:17:50 +02:00
'compare_diff_raw expected current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
tests: use test_ln_s_add to remove SYMLINKS prerequisite (trivial cases) There are many instances where the treatment of symbolic links in the object model and the algorithms are tested, but where it is not necessary to actually have a symbolic link in the worktree. Make adjustments to the tests and remove the SYMLINKS prerequisite when appropriate in trivial cases, where "trivial" means: - merely a replacement of 'ln -s a b && git add b' by test_ln_s_add is needed; - a test for symbolic link on the file system can be split off (and remains protected by SYMLINKS); - existing code is equivalent to test_ln_s_add. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-07 22:53:28 +02:00
test_expect_success \
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
'make file0 into something completely different' \
'rm -f file0 &&
tests: use test_ln_s_add to remove SYMLINKS prerequisite (trivial cases) There are many instances where the treatment of symbolic links in the object model and the algorithms are tested, but where it is not necessary to actually have a symbolic link in the worktree. Make adjustments to the tests and remove the SYMLINKS prerequisite when appropriate in trivial cases, where "trivial" means: - merely a replacement of 'ln -s a b && git add b' by test_ln_s_add is needed; - a test for symbolic link on the file system can be split off (and remains protected by SYMLINKS); - existing code is equivalent to test_ln_s_add. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-07 22:53:28 +02:00
test_ln_s_add frotz file0 &&
git update-index file1'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
test_expect_success \
'run diff with -B' \
Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-03 07:52:14 +02:00
'git diff-index -B "$tree" >current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
cat >expected <<\EOF
:100644 120000 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 67be421f88824578857624f7b3dc75e99a8a1481 T file0
[PATCH] Rework -B output. Patch for a completely rewritten file detected by the -B flag was shown as a pair of creation followed by deletion in earlier versions. This was an misguided attempt to make reviewing such a complete rewrite easier, and unnecessarily ended up confusing git-apply. Instead, show the entire contents of old version prefixed with '-', followed by the entire contents of new version prefixed with '+'. This gives the same easy-to-review for human consumer while keeping it a single, regular modification patch for machine consumption, something that even GNU patch can grok. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-19 22:17:50 +02:00
:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 M100 file1
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
EOF
tests: use test_ln_s_add to remove SYMLINKS prerequisite (trivial cases) There are many instances where the treatment of symbolic links in the object model and the algorithms are tested, but where it is not necessary to actually have a symbolic link in the worktree. Make adjustments to the tests and remove the SYMLINKS prerequisite when appropriate in trivial cases, where "trivial" means: - merely a replacement of 'ln -s a b && git add b' by test_ln_s_add is needed; - a test for symbolic link on the file system can be split off (and remains protected by SYMLINKS); - existing code is equivalent to test_ln_s_add. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-07 22:53:28 +02:00
test_expect_success \
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
'validate result of -B (#5)' \
[PATCH] Rework -B output. Patch for a completely rewritten file detected by the -B flag was shown as a pair of creation followed by deletion in earlier versions. This was an misguided attempt to make reviewing such a complete rewrite easier, and unnecessarily ended up confusing git-apply. Instead, show the entire contents of old version prefixed with '-', followed by the entire contents of new version prefixed with '+'. This gives the same easy-to-review for human consumer while keeping it a single, regular modification patch for machine consumption, something that even GNU patch can grok. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-19 22:17:50 +02:00
'compare_diff_raw expected current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
test_expect_success \
Fix typo in t4008 test title Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-01 20:06:41 +01:00
'run diff with -B -M' \
Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-03 07:52:14 +02:00
'git diff-index -B -M "$tree" >current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
rename: Break filepairs with different types. When we consider if a path has been totally rewritten, we did not touch changes from symlinks to files or vice versa. But a change that modifies even the type of a blob surely should count as a complete rewrite. While we are at it, modernise diffcore-break to be aware of gitlinks (we do not want to touch them). Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-01 07:22:38 +01:00
# file0 changed from regular to symlink. file1 is very close to the preimage of file0.
diff -B -M: fix output for "copy and then rewrite" case Starting from a single file, A, if you create B as a copy of A (and possibly make some edit) and then make extensive change to A, you will see: $ git diff -C --name-status C89 A B M A which is expected. However, if you ask the same question in a different way, you see this: $ git diff -B -M --name-status R89 A B M100 A telling us that A was rename-edited into B (as if "A will no longer exist as the result") and at the same time A itself was extensively edited. In this case, because the resulting tree still does have file A (even if it has contents vastly different from the original), we should use "C"opy, not "R"ename, to avoid hinting that A somehow goes away. Two existing tests were depending on the wrong behaviour, and fixed. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-23 19:02:02 +02:00
# the change does not make file0 disappear, so file1 is denoted as a copy of file0
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
cat >expected <<\EOF
:100644 120000 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 67be421f88824578857624f7b3dc75e99a8a1481 T file0
diff -B -M: fix output for "copy and then rewrite" case Starting from a single file, A, if you create B as a copy of A (and possibly make some edit) and then make extensive change to A, you will see: $ git diff -C --name-status C89 A B M A which is expected. However, if you ask the same question in a different way, you see this: $ git diff -B -M --name-status R89 A B M100 A telling us that A was rename-edited into B (as if "A will no longer exist as the result") and at the same time A itself was extensively edited. In this case, because the resulting tree still does have file A (even if it has contents vastly different from the original), we should use "C"opy, not "R"ename, to avoid hinting that A somehow goes away. Two existing tests were depending on the wrong behaviour, and fixed. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-23 19:02:02 +02:00
:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 C file0 file1
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
EOF
tests: use test_ln_s_add to remove SYMLINKS prerequisite (trivial cases) There are many instances where the treatment of symbolic links in the object model and the algorithms are tested, but where it is not necessary to actually have a symbolic link in the worktree. Make adjustments to the tests and remove the SYMLINKS prerequisite when appropriate in trivial cases, where "trivial" means: - merely a replacement of 'ln -s a b && git add b' by test_ln_s_add is needed; - a test for symbolic link on the file system can be split off (and remains protected by SYMLINKS); - existing code is equivalent to test_ln_s_add. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-07 22:53:28 +02:00
test_expect_success \
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
'validate result of -B -M (#6)' \
[PATCH] Rework -B output. Patch for a completely rewritten file detected by the -B flag was shown as a pair of creation followed by deletion in earlier versions. This was an misguided attempt to make reviewing such a complete rewrite easier, and unnecessarily ended up confusing git-apply. Instead, show the entire contents of old version prefixed with '-', followed by the entire contents of new version prefixed with '+'. This gives the same easy-to-review for human consumer while keeping it a single, regular modification patch for machine consumption, something that even GNU patch can grok. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-19 22:17:50 +02:00
'compare_diff_raw expected current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
test_expect_success \
'run diff with -M' \
Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-03 07:52:14 +02:00
'git diff-index -M "$tree" >current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
# This should not mistake file0 as the copy source of new file1
# due to type differences.
cat >expected <<\EOF
:100644 120000 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 67be421f88824578857624f7b3dc75e99a8a1481 T file0
:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 M file1
EOF
tests: use test_ln_s_add to remove SYMLINKS prerequisite (trivial cases) There are many instances where the treatment of symbolic links in the object model and the algorithms are tested, but where it is not necessary to actually have a symbolic link in the worktree. Make adjustments to the tests and remove the SYMLINKS prerequisite when appropriate in trivial cases, where "trivial" means: - merely a replacement of 'ln -s a b && git add b' by test_ln_s_add is needed; - a test for symbolic link on the file system can be split off (and remains protected by SYMLINKS); - existing code is equivalent to test_ln_s_add. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-07 22:53:28 +02:00
test_expect_success \
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
'validate result of -M (#7)' \
[PATCH] Rework -B output. Patch for a completely rewritten file detected by the -B flag was shown as a pair of creation followed by deletion in earlier versions. This was an misguided attempt to make reviewing such a complete rewrite easier, and unnecessarily ended up confusing git-apply. Instead, show the entire contents of old version prefixed with '-', followed by the entire contents of new version prefixed with '+'. This gives the same easy-to-review for human consumer while keeping it a single, regular modification patch for machine consumption, something that even GNU patch can grok. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-19 22:17:50 +02:00
'compare_diff_raw expected current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
test_expect_success \
'file1 edited to look like file0 and file0 rename-edited to file2' \
'rm -f file0 file1 &&
Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-03 07:52:14 +02:00
git read-tree -m $tree &&
git checkout-index -f -u -a &&
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
sed -e "s/git/GIT/" file0 >file1 &&
sed -e "s/git/GET/" file0 >file2 &&
tests: add missing && Breaks in a test assertion's && chain can potentially hide failures from earlier commands in the chain. Commands intended to fail should be marked with !, test_must_fail, or test_might_fail. The examples in this patch do not require that. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-31 02:46:54 +01:00
rm -f file0 &&
Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-03 07:52:14 +02:00
git update-index --add --remove file0 file1 file2'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
test_expect_success \
'run diff with -B' \
Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-03 07:52:14 +02:00
'git diff-index -B "$tree" >current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
cat >expected <<\EOF
:100644 000000 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 0000000000000000000000000000000000000000 D file0
[PATCH] Rework -B output. Patch for a completely rewritten file detected by the -B flag was shown as a pair of creation followed by deletion in earlier versions. This was an misguided attempt to make reviewing such a complete rewrite easier, and unnecessarily ended up confusing git-apply. Instead, show the entire contents of old version prefixed with '-', followed by the entire contents of new version prefixed with '+'. This gives the same easy-to-review for human consumer while keeping it a single, regular modification patch for machine consumption, something that even GNU patch can grok. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-19 22:17:50 +02:00
:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 08bb2fb671deff4c03a4d4a0a1315dff98d5732c M100 file1
Adjust diff-raw tests to the status letter change. We use 'A' for added files instead of 'N' to make the it visually easier to distinguish from 'M' now. While we are at it, make the test scripts executable. Yes, I know it does not matter because t/Makefile runs them explicitly with "sh tXXXX-blah.sh", but being consistent is always better. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-07-26 09:22:43 +02:00
:000000 100644 0000000000000000000000000000000000000000 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 A file2
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
EOF
test_expect_success \
'validate result of -B (#8)' \
[PATCH] Rework -B output. Patch for a completely rewritten file detected by the -B flag was shown as a pair of creation followed by deletion in earlier versions. This was an misguided attempt to make reviewing such a complete rewrite easier, and unnecessarily ended up confusing git-apply. Instead, show the entire contents of old version prefixed with '-', followed by the entire contents of new version prefixed with '+'. This gives the same easy-to-review for human consumer while keeping it a single, regular modification patch for machine consumption, something that even GNU patch can grok. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-19 22:17:50 +02:00
'compare_diff_raw expected current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
test_expect_success \
diffcore-rename: properly honor the difference between -M and -C We would allow rename detection to do copy detection even when asked purely for renames. That confuses users, but more importantly it can terminally confuse the recursive merge rename logic. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-19 05:10:32 +01:00
'run diff with -B -C' \
'git diff-index -B -C "$tree" >current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
cat >expected <<\EOF
:100644 100644 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 08bb2fb671deff4c03a4d4a0a1315dff98d5732c C095 file0 file1
:100644 100644 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 59f832e5c8b3f7e486be15ad0cd3e95ba9af8998 R095 file0 file2
EOF
test_expect_success \
'validate result of -B -M (#9)' \
[PATCH] Rework -B output. Patch for a completely rewritten file detected by the -B flag was shown as a pair of creation followed by deletion in earlier versions. This was an misguided attempt to make reviewing such a complete rewrite easier, and unnecessarily ended up confusing git-apply. Instead, show the entire contents of old version prefixed with '-', followed by the entire contents of new version prefixed with '+'. This gives the same easy-to-review for human consumer while keeping it a single, regular modification patch for machine consumption, something that even GNU patch can grok. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-19 22:17:50 +02:00
'compare_diff_raw expected current'
[PATCH] Add -B flag to diff-* brothers. A new diffcore transformation, diffcore-break.c, is introduced. When the -B flag is given, a patch that represents a complete rewrite is broken into a deletion followed by a creation. This makes it easier to review such a complete rewrite patch. The -B flag takes the same syntax as the -M and -C flags to specify the minimum amount of non-source material the resulting file needs to have to be considered a complete rewrite, and defaults to 99% if not specified. As the new test t4008-diff-break-rewrite.sh demonstrates, if a file is a complete rewrite, it is broken into a delete/create pair, which can further be subjected to the usual rename detection if -M or -C is used. For example, if file0 gets completely rewritten to make it as if it were rather based on file1 which itself disappeared, the following happens: The original change looks like this: file0 --> file0' (quite different from file0) file1 --> /dev/null After diffcore-break runs, it would become this: file0 --> /dev/null /dev/null --> file0' file1 --> /dev/null Then diffcore-rename matches them up: file1 --> file0' The internal score values are finer grained now. Earlier maximum of 10000 has been raised to 60000; there is no user visible changes but there is no reason to waste available bits. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 09:08:37 +02:00
test_done
Reference in New Issue Copy Permalink