git-commit-vandalism/transport.h

280 lines
8.5 KiB
C
Raw Normal View History

#ifndef TRANSPORT_H
#define TRANSPORT_H
#include "cache.h"
#include "run-command.h"
#include "remote.h"
#include "list-objects-filter-options.h"
#include "string-list.h"
struct git_transport_options {
unsigned thin : 1;
unsigned keep : 1;
unsigned followtags : 1;
clone: open a shortcut for connectivity check In order to make sure the cloned repository is good, we run "rev-list --objects --not --all $new_refs" on the repository. This is expensive on large repositories. This patch attempts to mitigate the impact in this special case. In the "good" clone case, we only have one pack. If all of the following are met, we can be sure that all objects reachable from the new refs exist, which is the intention of running "rev-list ...": - all refs point to an object in the pack - there are no dangling pointers in any object in the pack - no objects in the pack point to objects outside the pack The second and third checks can be done with the help of index-pack as a slight variation of --strict check (which introduces a new condition for the shortcut: pack transfer must be used and the number of objects large enough to call index-pack). The first is checked in check_everything_connected after we get an "ok" from index-pack. "index-pack + new checks" is still faster than the current "index-pack + rev-list", which is the whole point of this patch. If any of the conditions fail, we fall back to the good old but expensive "rev-list ..". In that case it's even more expensive because we have to pay for the new checks in index-pack. But that should only happen when the other side is either buggy or malicious. Cloning linux-2.6 over file:// before after real 3m25.693s 2m53.050s user 5m2.037s 4m42.396s sys 0m13.750s 0m16.574s A more realistic test with ssh:// over wireless before after real 11m26.629s 10m4.213s user 5m43.196s 5m19.444s sys 0m35.812s 0m37.630s This shortcut is not applied to shallow clones, partly because shallow clones should have no more objects than a usual fetch and the cost of rev-list is acceptable, partly to avoid dealing with corner cases when grafting is involved. This shortcut does not apply to unpack-objects code path either because the number of objects must be small in order to trigger that code path. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-26 03:16:17 +02:00
unsigned check_self_contained_and_connected : 1;
unsigned self_contained_and_connected : 1;
unsigned update_shallow : 1;
fetch, upload-pack: --deepen=N extends shallow boundary by N commits In git-fetch, --depth argument is always relative with the latest remote refs. This makes it a bit difficult to cover this use case, where the user wants to make the shallow history, say 3 levels deeper. It would work if remote refs have not moved yet, but nobody can guarantee that, especially when that use case is performed a couple months after the last clone or "git fetch --depth". Also, modifying shallow boundary using --depth does not work well with clones created by --since or --not. This patch fixes that. A new argument --deepen=<N> will add <N> more (*) parent commits to the current history regardless of where remote refs are. Have/Want negotiation is still respected. So if remote refs move, the server will send two chunks: one between "have" and "want" and another to extend shallow history. In theory, the client could send no "want"s in order to get the second chunk only. But the protocol does not allow that. Either you send no want lines, which means ls-remote; or you have to send at least one want line that carries deep-relative to the server.. The main work was done by Dongcan Jiang. I fixed it up here and there. And of course all the bugs belong to me. (*) We could even support --deepen=<N> where <N> is negative. In that case we can cut some history from the shallow clone. This operation (and --depth=<shorter depth>) does not require interaction with remote side (and more complicated to implement as a result). Helped-by: Duy Nguyen <pclouds@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-12 12:54:09 +02:00
unsigned deepen_relative : 1;
/* see documentation of corresponding flag in fetch-pack.h */
unsigned from_promisor : 1;
fetch-pack: write shallow, then check connectivity When fetching, connectivity is checked after the shallow file is updated. There are 2 issues with this: (1) the connectivity check is only performed up to ancestors of existing refs (which is not thorough enough if we were deepening an existing ref in the first place), and (2) there is no rollback of the shallow file if the connectivity check fails. To solve (1), update the connectivity check to check the ancestry chain completely in the case of a deepening fetch by refraining from passing "--not --all" when invoking rev-list in connected.c. To solve (2), have fetch_pack() perform its own connectivity check before updating the shallow file. To support existing use cases in which "git fetch-pack" is used to download objects without much regard as to the connectivity of the resulting objects with respect to the existing repository, the connectivity check is only done if necessary (that is, the fetch is not a clone, and the fetch involves shallow/deepen functionality). "git fetch" still performs its own connectivity check, preserving correctness but sometimes performing redundant work. This redundancy is mitigated by the fact that fetch_pack() reports if it has performed a connectivity check itself, and if the transport supports connect or stateless-connect, it will bubble up that report so that "git fetch" knows not to perform the connectivity check in such a case. This was noticed when a user tried to deepen an existing repository by fetching with --no-shallow from a server that did not send all necessary objects - the connectivity check as run by "git fetch" succeeded, but a subsequent "git fsck" failed. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-03 00:08:43 +02:00
/*
* If this transport supports connect or stateless-connect,
* the corresponding field in struct fetch_pack_args is copied
* here after fetching.
*
* See the definition of connectivity_checked in struct
* fetch_pack_args for more information.
*/
unsigned connectivity_checked:1;
int depth;
const char *deepen_since;
const struct string_list *deepen_not;
const char *uploadpack;
const char *receivepack;
struct push_cas_option *cas;
struct list_objects_filter_options filter_options;
/*
* This is only used during fetch. See the documentation of
* negotiation_tips in struct fetch_pack_args.
*
* This field is only supported by transports that support connect or
* stateless_connect. Set this field directly instead of using
* transport_set_option().
*/
struct oid_array *negotiation_tips;
};
enum transport_family {
TRANSPORT_FAMILY_ALL = 0,
TRANSPORT_FAMILY_IPV4,
TRANSPORT_FAMILY_IPV6
};
struct transport {
const struct transport_vtable *vtable;
struct remote *remote;
const char *url;
void *data;
const struct ref *remote_refs;
/**
* Indicates whether we already called get_refs_list(); set by
* transport.c::transport_get_remote_refs().
*/
unsigned got_remote_refs : 1;
fetch: work around "transport-take-over" hack A Git-aware "connect" transport allows the "transport_take_over" to redirect generic transport requests like fetch(), push_refs() and get_refs_list() to the native Git transport handling methods. The take-over process replaces transport->data with a fake data that these method implementations understand. While this hack works OK for a single request, it breaks when the transport needs to make more than one requests. transport->data that used to hold necessary information for the specific helper to work correctly is destroyed during the take-over process. One codepath that this matters is "git fetch" in auto-follow mode; when it does not get all the tags that ought to point at the history it got (which can be determined by looking at the peeled tags in the initial advertisement) from the primary transfer, it internally makes a second request to complete the fetch. Because "take-over" hack has already destroyed the data necessary to talk to the transport helper by the time this happens, the second request cannot make a request to the helper to make another connection to fetch these additional tags. Mark such a transport as "cannot_reuse", and use a separate transport to perform the backfill fetch in order to work around this breakage. Note that this problem does not manifest itself when running t5802, because our upload-pack gives you all the necessary auto-followed tags during the primary transfer. You would need to step through "git fetch" in a debugger, stop immediately after the primary transfer finishes and writes these auto-followed tags, remove the tag references and repack/prune the repository to convince the "find-non-local-tags" procedure that the primary transfer failed to give us all the necessary tags, and then let it continue, in order to trigger the bug in the secondary transfer this patch fixes. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-08 00:47:18 +02:00
/*
* Transports that call take-over destroys the data specific to
* the transport type while doing so, and cannot be reused.
*/
unsigned cannot_reuse : 1;
/*
* A hint from caller that it will be performing a clone, not
* normal fetch. IOW the repository is guaranteed empty.
*/
unsigned cloning : 1;
/*
* Indicates that the transport is connected via a half-duplex
* connection and should operate in stateless-rpc mode.
*/
unsigned stateless_rpc : 1;
/*
* These strings will be passed to the {pre, post}-receive hook,
* on the remote side, if both sides support the push options capability.
*/
const struct string_list *push_options;
/*
* These strings will be passed to the remote side on each command
* request, if both sides support the server-option capability.
*/
const struct string_list *server_options;
struct string_list pack_lockfiles;
signed verbose : 3;
/**
* Transports should not set this directly, and should use this
* value without having to check isatty(2), -q/--quiet
* (transport->verbose < 0), etc. - checking has already been done
* in transport_set_verbosity().
**/
unsigned progress : 1;
/*
* If transport is at least potentially smart, this points to
* git_transport_options structure to use in case transport
* actually turns out to be smart.
*/
struct git_transport_options *smart_options;
enum transport_family family;
const struct git_hash_algo *hash_algo;
};
#define TRANSPORT_PUSH_ALL (1<<0)
#define TRANSPORT_PUSH_FORCE (1<<1)
#define TRANSPORT_PUSH_DRY_RUN (1<<2)
#define TRANSPORT_PUSH_MIRROR (1<<3)
#define TRANSPORT_PUSH_PORCELAIN (1<<4)
#define TRANSPORT_PUSH_SET_UPSTREAM (1<<5)
#define TRANSPORT_RECURSE_SUBMODULES_CHECK (1<<6)
#define TRANSPORT_PUSH_PRUNE (1<<7)
#define TRANSPORT_RECURSE_SUBMODULES_ON_DEMAND (1<<8)
#define TRANSPORT_PUSH_NO_HOOK (1<<9)
#define TRANSPORT_PUSH_FOLLOW_TAGS (1<<10)
#define TRANSPORT_PUSH_CERT_ALWAYS (1<<11)
#define TRANSPORT_PUSH_CERT_IF_ASKED (1<<12)
#define TRANSPORT_PUSH_ATOMIC (1<<13)
#define TRANSPORT_PUSH_OPTIONS (1<<14)
#define TRANSPORT_RECURSE_SUBMODULES_ONLY (1<<15)
#define TRANSPORT_PUSH_FORCE_IF_INCLUDES (1<<16)
int transport_summary_width(const struct ref *refs);
/* Returns a transport suitable for the url */
struct transport *transport_get(struct remote *, const char *);
/*
* Check whether a transport is allowed by the environment.
*
* Type should generally be the URL scheme, as described in
* Documentation/git.txt
*
* from_user specifies if the transport was given by the user. If unknown pass
* a -1 to read from the environment to determine if the transport was given by
* the user.
*
*/
int is_transport_allowed(const char *type, int from_user);
transport: add a protocol-whitelist environment variable If we are cloning an untrusted remote repository into a sandbox, we may also want to fetch remote submodules in order to get the complete view as intended by the other side. However, that opens us up to attacks where a malicious user gets us to clone something they would not otherwise have access to (this is not necessarily a problem by itself, but we may then act on the cloned contents in a way that exposes them to the attacker). Ideally such a setup would sandbox git entirely away from high-value items, but this is not always practical or easy to set up (e.g., OS network controls may block multiple protocols, and we would want to enable some but not others). We can help this case by providing a way to restrict particular protocols. We use a whitelist in the environment. This is more annoying to set up than a blacklist, but defaults to safety if the set of protocols git supports grows). If no whitelist is specified, we continue to default to allowing all protocols (this is an "unsafe" default, but since the minority of users will want this sandboxing effect, it is the only sensible one). A note on the tests: ideally these would all be in a single test file, but the git-daemon and httpd test infrastructure is an all-or-nothing proposition rather than a test-by-test prerequisite. By putting them all together, we would be unable to test the file-local code on machines without apache. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-16 19:12:52 +02:00
/*
* Check whether a transport is allowed by the environment,
* and die otherwise.
transport: add a protocol-whitelist environment variable If we are cloning an untrusted remote repository into a sandbox, we may also want to fetch remote submodules in order to get the complete view as intended by the other side. However, that opens us up to attacks where a malicious user gets us to clone something they would not otherwise have access to (this is not necessarily a problem by itself, but we may then act on the cloned contents in a way that exposes them to the attacker). Ideally such a setup would sandbox git entirely away from high-value items, but this is not always practical or easy to set up (e.g., OS network controls may block multiple protocols, and we would want to enable some but not others). We can help this case by providing a way to restrict particular protocols. We use a whitelist in the environment. This is more annoying to set up than a blacklist, but defaults to safety if the set of protocols git supports grows). If no whitelist is specified, we continue to default to allowing all protocols (this is an "unsafe" default, but since the minority of users will want this sandboxing effect, it is the only sensible one). A note on the tests: ideally these would all be in a single test file, but the git-daemon and httpd test infrastructure is an all-or-nothing proposition rather than a test-by-test prerequisite. By putting them all together, we would be unable to test the file-local code on machines without apache. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-16 19:12:52 +02:00
*/
void transport_check_allowed(const char *type);
/* Transport options which apply to git:// and scp-style URLs */
/* The program to use on the remote side to send a pack */
#define TRANS_OPT_UPLOADPACK "uploadpack"
/* The program to use on the remote side to receive a pack */
#define TRANS_OPT_RECEIVEPACK "receivepack"
/* Transfer the data as a thin pack if not null */
#define TRANS_OPT_THIN "thin"
/* Check the current value of the remote ref */
#define TRANS_OPT_CAS "cas"
/* Keep the pack that was transferred if not null */
#define TRANS_OPT_KEEP "keep"
/* Limit the depth of the fetch if not null */
#define TRANS_OPT_DEPTH "depth"
/* Limit the depth of the fetch based on time if not null */
#define TRANS_OPT_DEEPEN_SINCE "deepen-since"
/* Limit the depth of the fetch based on revs if not null */
#define TRANS_OPT_DEEPEN_NOT "deepen-not"
fetch, upload-pack: --deepen=N extends shallow boundary by N commits In git-fetch, --depth argument is always relative with the latest remote refs. This makes it a bit difficult to cover this use case, where the user wants to make the shallow history, say 3 levels deeper. It would work if remote refs have not moved yet, but nobody can guarantee that, especially when that use case is performed a couple months after the last clone or "git fetch --depth". Also, modifying shallow boundary using --depth does not work well with clones created by --since or --not. This patch fixes that. A new argument --deepen=<N> will add <N> more (*) parent commits to the current history regardless of where remote refs are. Have/Want negotiation is still respected. So if remote refs move, the server will send two chunks: one between "have" and "want" and another to extend shallow history. In theory, the client could send no "want"s in order to get the second chunk only. But the protocol does not allow that. Either you send no want lines, which means ls-remote; or you have to send at least one want line that carries deep-relative to the server.. The main work was done by Dongcan Jiang. I fixed it up here and there. And of course all the bugs belong to me. (*) We could even support --deepen=<N> where <N> is negative. In that case we can cut some history from the shallow clone. This operation (and --depth=<shorter depth>) does not require interaction with remote side (and more complicated to implement as a result). Helped-by: Duy Nguyen <pclouds@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-12 12:54:09 +02:00
/* Limit the deepen of the fetch if not null */
#define TRANS_OPT_DEEPEN_RELATIVE "deepen-relative"
/* Aggressively fetch annotated tags if possible */
#define TRANS_OPT_FOLLOWTAGS "followtags"
/* Accept refs that may update .git/shallow without --depth */
#define TRANS_OPT_UPDATE_SHALLOW "updateshallow"
push: the beginning of "git push --signed" While signed tags and commits assert that the objects thusly signed came from you, who signed these objects, there is not a good way to assert that you wanted to have a particular object at the tip of a particular branch. My signing v2.0.1 tag only means I want to call the version v2.0.1, and it does not mean I want to push it out to my 'master' branch---it is likely that I only want it in 'maint', so the signature on the object alone is insufficient. The only assurance to you that 'maint' points at what I wanted to place there comes from your trust on the hosting site and my authentication with it, which cannot easily audited later. Introduce a mechanism that allows you to sign a "push certificate" (for the lack of better name) every time you push, asserting that what object you are pushing to update which ref that used to point at what other object. Think of it as a cryptographic protection for ref updates, similar to signed tags/commits but working on an orthogonal axis. The basic flow based on this mechanism goes like this: 1. You push out your work with "git push --signed". 2. The sending side learns where the remote refs are as usual, together with what protocol extension the receiving end supports. If the receiving end does not advertise the protocol extension "push-cert", an attempt to "git push --signed" fails. Otherwise, a text file, that looks like the following, is prepared in core: certificate version 0.1 pusher Junio C Hamano <gitster@pobox.com> 1315427886 -0700 7339ca65... 21580ecb... refs/heads/master 3793ac56... 12850bec... refs/heads/next The file begins with a few header lines, which may grow as we gain more experience. The 'pusher' header records the name of the signer (the value of user.signingkey configuration variable, falling back to GIT_COMMITTER_{NAME|EMAIL}) and the time of the certificate generation. After the header, a blank line follows, followed by a copy of the protocol message lines. Each line shows the old and the new object name at the tip of the ref this push tries to update, in the way identical to how the underlying "git push" protocol exchange tells the ref updates to the receiving end (by recording the "old" object name, the push certificate also protects against replaying). It is expected that new command packet types other than the old-new-refname kind will be included in push certificate in the same way as would appear in the plain vanilla command packets in unsigned pushes. The user then is asked to sign this push certificate using GPG, formatted in a way similar to how signed tag objects are signed, and the result is sent to the other side (i.e. receive-pack). In the protocol exchange, this step comes immediately before the sender tells what the result of the push should be, which in turn comes before it sends the pack data. 3. When the receiving end sees a push certificate, the certificate is written out as a blob. The pre-receive hook can learn about the certificate by checking GIT_PUSH_CERT environment variable, which, if present, tells the object name of this blob, and make the decision to allow or reject this push. Additionally, the post-receive hook can also look at the certificate, which may be a good place to log all the received certificates for later audits. Because a push certificate carry the same information as the usual command packets in the protocol exchange, we can omit the latter when a push certificate is in use and reduce the protocol overhead. This however is not included in this patch to make it easier to review (in other words, the series at this step should never be released without the remainder of the series, as it implements an interim protocol that will be incompatible with the final one). As such, the documentation update for the protocol is left out of this step. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-12 20:17:07 +02:00
/* Send push certificates */
#define TRANS_OPT_PUSH_CERT "pushcert"
/* Indicate that these objects are being fetched by a promisor */
#define TRANS_OPT_FROM_PROMISOR "from-promisor"
/* Filter objects for partial clone and fetch */
#define TRANS_OPT_LIST_OBJECTS_FILTER "filter"
remote-curl: pass on atomic capability to remote side When pushing more than one reference with the --atomic option, the server is supposed to perform a single atomic transaction to update the references, leaving them either all to succeed or all to fail. This works fine when pushing locally or over SSH, but when pushing over HTTP, we fail to pass the atomic capability to the remote side. In fact, we have not reported this capability to any remote helpers during the life of the feature. Now normally, things happen to work nevertheless, since we actually check for most types of failures, such as non-fast-forward updates, on the client side, and just abort the entire attempt. However, if the server side reports a problem, such as the inability to lock a ref, the transaction isn't atomic, because we haven't passed the appropriate capability over and the remote side has no way of knowing that we wanted atomic behavior. Fix this by passing the option from the transport code through to remote helpers, and from the HTTP remote helper down to send-pack. With this change, we can detect if the server side rejects the push and report back appropriately. Note the difference in the messages: the remote side reports "atomic transaction failed", while our own checking rejects pushes with the message "atomic push failed". Document the atomic option in the remote helper documentation, so other implementers can implement it if they like. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-17 01:45:34 +02:00
/* Request atomic (all-or-nothing) updates when pushing */
#define TRANS_OPT_ATOMIC "atomic"
/* Require remote changes to be integrated locally. */
#define TRANS_OPT_FORCE_IF_INCLUDES "force-if-includes"
/**
* Returns 0 if the option was used, non-zero otherwise. Prints a
* message to stderr if the option is not used.
**/
int transport_set_option(struct transport *transport, const char *name,
const char *value);
void transport_set_verbosity(struct transport *transport, int verbosity,
int force_progress);
#define REJECT_NON_FF_HEAD 0x01
#define REJECT_NON_FF_OTHER 0x02
#define REJECT_ALREADY_EXISTS 0x04
#define REJECT_FETCH_FIRST 0x08
#define REJECT_NEEDS_FORCE 0x10
#define REJECT_REF_NEEDS_UPDATE 0x20
int transport_push(struct repository *repo,
struct transport *connection,
struct refspec *rs, int flags,
unsigned int * reject_reasons);
/*
* Retrieve refs from a remote.
*
* Optionally a list of ref prefixes can be provided which can be sent to the
* server (when communicating using protocol v2) to enable it to limit the ref
* advertisement. Since ref filtering is done on the server's end (and only
* when using protocol v2), this can return refs which don't match the provided
* ref_prefixes.
*/
const struct ref *transport_get_remote_refs(struct transport *transport,
const struct strvec *ref_prefixes);
/*
* Fetch the hash algorithm used by a remote.
*
* This can only be called after fetching the remote refs.
*/
const struct git_hash_algo *transport_get_hash_algo(struct transport *transport);
fetch-pack: unify ref in and out param When a user fetches: - at least one up-to-date ref and at least one non-up-to-date ref, - using HTTP with protocol v0 (or something else that uses the fetch command of a remote helper) some refs might not be updated after the fetch. This bug was introduced in commit 989b8c4452 ("fetch-pack: put shallow info in output parameter", 2018-06-28) which allowed transports to report the refs that they have fetched in a new out-parameter "fetched_refs". If they do so, transport_fetch_refs() makes this information available to its caller. Users of "fetched_refs" rely on the following 3 properties: (1) it is the complete list of refs that was passed to transport_fetch_refs(), (2) it has shallow information (REF_STATUS_REJECT_SHALLOW set if relevant), and (3) it has updated OIDs if ref-in-want was used (introduced after 989b8c4452). In an effort to satisfy (1), whenever transport_fetch_refs() filters the refs sent to the transport, it re-adds the filtered refs to whatever the transport supplies before returning it to the user. However, the implementation in 989b8c4452 unconditionally re-adds the filtered refs without checking if the transport refrained from reporting anything in "fetched_refs" (which it is allowed to do), resulting in an incomplete list, no longer satisfying (1). An earlier effort to resolve this [1] solved the issue by readding the filtered refs only if the transport did not refrain from reporting in "fetched_refs", but after further discussion, it seems that the better solution is to revert the API change that introduced "fetched_refs". This API change was first suggested as part of a ref-in-want implementation that allowed for ref patterns and, thus, there could be drastic differences between the input refs and the refs actually fetched [2]; we eventually decided to only allow exact ref names, but this API change remained even though its necessity was decreased. Therefore, revert this API change by reverting commit 989b8c4452, and make receive_wanted_refs() update the OIDs in the sought array (like how update_shallow() updates shallow information in the sought array) instead. A test is also included to show that the user-visible bug discussed at the beginning of this commit message no longer exists. [1] https://public-inbox.org/git/20180801171806.GA122458@google.com/ [2] https://public-inbox.org/git/86a128c5fb710a41791e7183207c4d64889f9307.1485381677.git.jonathantanmy@google.com/ Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-01 22:13:20 +02:00
int transport_fetch_refs(struct transport *transport, struct ref *refs);
void transport_unlock_pack(struct transport *transport);
int transport_disconnect(struct transport *transport);
char *transport_anonymize_url(const char *url);
void transport_take_over(struct transport *transport,
struct child_process *child);
int transport_connect(struct transport *transport, const char *name,
const char *exec, int fd[2]);
/* Transport methods defined outside transport.c */
int transport_helper_init(struct transport *transport, const char *name);
int bidirectional_transfer_loop(int input, int output);
/* common methods used by transport.c and builtin/send-pack.c */
void transport_update_tracking_ref(struct remote *remote, struct ref *ref, int verbose);
int transport_refs_pushed(struct ref *ref);
void transport_print_push_status(const char *dest, struct ref *refs,
int verbose, int porcelain, unsigned int *reject_reasons);
/* common method used by transport-helper.c and send-pack.c */
void reject_atomic_push(struct ref *refs, int mirror_mode);
#endif