git-commit-vandalism/sequencer.h

237 lines
7.5 KiB
C
Raw Normal View History

#ifndef SEQUENCER_H
#define SEQUENCER_H
#include "cache.h"
#include "strbuf.h"
#include "wt-status.h"
struct commit;
struct repository;
const char *git_path_commit_editmsg(void);
const char *rebase_path_todo(void);
const char *rebase_path_todo_backup(void);
rebase-interactive: warn if commit is dropped with `rebase --edit-todo' When set to "warn" or "error", `rebase.missingCommitsCheck' would make `rebase -i' warn if the user removed commits from the todo list to prevent mistakes. Unfortunately, `rebase --edit-todo' and `rebase --continue' don't take it into account. This adds the ability for `rebase --edit-todo' and `rebase --continue' to check if commits were dropped by the user. As both edit_todo_list() and complete_action() parse the todo list and check for dropped commits, the code doing so in the latter is removed to reduce duplication. `edit_todo_list_advice' is removed from sequencer.c as it is no longer used there. This changes when a backup of the todo list is made. Until now, it was saved only once, before the initial edit. Now, it is also made if the original todo list has no errors or no dropped commits. Thus, the backup should be error-free. Without this, sequencer_continue() (`rebase --continue') could only compare the current todo list against the original, unedited list. Before this change, this file was only used by edit_todo_list() and `rebase -p' to create the backup before the initial edit, and check_todo_list_from_file(), only used by `rebase -p' to check for dropped commits after its own initial edit. If the edited list has an error, a file, `dropped', is created to report the issue. Otherwise, it is deleted. Usually, the edited list is compared against the list before editing, but if this file exists, it will be compared to the backup. Also, if the file exists, sequencer_continue() checks the list for dropped commits. If the check was performed every time, it would fail when resuming a rebase after resolving a conflict, as the backup will contain commits that were picked, but they will not be in the new list. It's safe to ignore this check if `dropped' does not exist, because that means that no errors were found at the last edition, so any missing commits here have already been picked. Five tests are added to t3404. The tests for `rebase.missingCommitsCheck = warn' and `rebase.missingCommitsCheck = error' have a similar structure. First, we start a rebase with an incorrect command on the first line. Then, we edit the todo list, removing the first and the last lines. This demonstrates that `--edit-todo' notices dropped commits, but not when the command is incorrect. Then, we restore the original todo list, and edit it to remove the last line. This demonstrates that if we add a commit after the initial edit, then remove it, `--edit-todo' will notice that it has been dropped. Then, the actual rebase takes place. In the third test, it is also checked that `--continue' will refuse to resume the rebase if commits were dropped. The fourth test checks that no errors are raised when resuming a rebase after resolving a conflict, the fifth checks that no errors are raised when editing the todo list after pausing the rebase. Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-28 22:12:46 +01:00
const char *rebase_path_dropped(void);
#define APPEND_SIGNOFF_DEDUP (1u << 0)
enum replay_action {
REPLAY_REVERT,
REPLAY_PICK,
REPLAY_INTERACTIVE_REBASE
};
enum commit_msg_cleanup_mode {
COMMIT_MSG_CLEANUP_SPACE,
COMMIT_MSG_CLEANUP_NONE,
COMMIT_MSG_CLEANUP_SCISSORS,
COMMIT_MSG_CLEANUP_ALL
};
struct replay_opts {
enum replay_action action;
sequencer: fix edit handling for cherry-pick and revert messages save_opts() should save any non-default values. It was intended to do this, but since most options in struct replay_opts default to 0, it only saved non-zero values. Unfortunately, this does not always work for options.edit. Roughly speaking, options.edit had a default value of 0 for cherry-pick but a default value of 1 for revert. Make save_opts() record a value whenever it differs from the default. options.edit was also overly simplistic; we had more than two cases. The behavior that previously existed was as follows: Non-conflict commits Right after Conflict revert Edit iff isatty(0) Edit (ignore isatty(0)) cherry-pick No edit See above Specify --edit Edit (ignore isatty(0)) See above Specify --no-edit (*) See above (*) Before stopping for conflicts, No edit is the behavior. After stopping for conflicts, the --no-edit flag is not saved so see the first two rows. However, the expected behavior is: Non-conflict commits Right after Conflict revert Edit iff isatty(0) Edit iff isatty(0) cherry-pick No edit Edit iff isatty(0) Specify --edit Edit (ignore isatty(0)) Edit (ignore isatty(0)) Specify --no-edit No edit No edit In order to get the expected behavior, we need to change options.edit to a tri-state: unspecified, false, or true. When specified, we follow what it says. When unspecified, we need to check whether the current commit being created is resolving a conflict as well as consulting options.action and isatty(0). While at it, add a should_edit() utility function that compresses options.edit down to a boolean based on the additional information for the non-conflict case. continue_single_pick() is the function responsible for resuming after conflict cases, regardless of whether there is one commit being picked or many. Make this function stop assuming edit behavior in all cases, so that it can correctly handle !isatty(0) and specific requests to not edit the commit message. Reported-by: Renato Botelho <garga@freebsd.org> Signed-off-by: Elijah Newren <newren@gmail.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-03-31 08:52:20 +02:00
/* Tri-state options: unspecified, false, or true */
int edit;
sequencer: fix edit handling for cherry-pick and revert messages save_opts() should save any non-default values. It was intended to do this, but since most options in struct replay_opts default to 0, it only saved non-zero values. Unfortunately, this does not always work for options.edit. Roughly speaking, options.edit had a default value of 0 for cherry-pick but a default value of 1 for revert. Make save_opts() record a value whenever it differs from the default. options.edit was also overly simplistic; we had more than two cases. The behavior that previously existed was as follows: Non-conflict commits Right after Conflict revert Edit iff isatty(0) Edit (ignore isatty(0)) cherry-pick No edit See above Specify --edit Edit (ignore isatty(0)) See above Specify --no-edit (*) See above (*) Before stopping for conflicts, No edit is the behavior. After stopping for conflicts, the --no-edit flag is not saved so see the first two rows. However, the expected behavior is: Non-conflict commits Right after Conflict revert Edit iff isatty(0) Edit iff isatty(0) cherry-pick No edit Edit iff isatty(0) Specify --edit Edit (ignore isatty(0)) Edit (ignore isatty(0)) Specify --no-edit No edit No edit In order to get the expected behavior, we need to change options.edit to a tri-state: unspecified, false, or true. When specified, we follow what it says. When unspecified, we need to check whether the current commit being created is resolving a conflict as well as consulting options.action and isatty(0). While at it, add a should_edit() utility function that compresses options.edit down to a boolean based on the additional information for the non-conflict case. continue_single_pick() is the function responsible for resuming after conflict cases, regardless of whether there is one commit being picked or many. Make this function stop assuming edit behavior in all cases, so that it can correctly handle !isatty(0) and specific requests to not edit the commit message. Reported-by: Renato Botelho <garga@freebsd.org> Signed-off-by: Elijah Newren <newren@gmail.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-03-31 08:52:20 +02:00
/* Boolean options */
int record_origin;
int no_commit;
int signoff;
int allow_ff;
int allow_rerere_auto;
int allow_empty;
int allow_empty_message;
rebase (interactive-backend): fix handling of commits that become empty As established in the previous commit and commit b00bf1c9a8dd (git-rebase: make --allow-empty-message the default, 2018-06-27), the behavior for rebase with different backends in various edge or corner cases is often more happenstance than design. This commit addresses another such corner case: commits which "become empty". A careful reader may note that there are two types of commits which would become empty due to a rebase: * [clean cherry-pick] Commits which are clean cherry-picks of upstream commits, as determined by `git log --cherry-mark ...`. Re-applying these commits would result in an empty set of changes and a duplicative commit message; i.e. these are commits that have "already been applied" upstream. * [become empty] Commits which are not empty to start, are not clean cherry-picks of upstream commits, but which still become empty after being rebased. This happens e.g. when a commit has changes which are a strict subset of the changes in an upstream commit, or when the changes of a commit can be found spread across or among several upstream commits. Clearly, in both cases the changes in the commit in question are found upstream already, but the commit message may not be in the latter case. When cherry-mark can determine a commit is already upstream, then because of how cherry-mark works this means the upstream commit message was about the *exact* same set of changes. Thus, the commit messages can be assumed to be fully interchangeable (and are in fact likely to be completely identical). As such, the clean cherry-pick case represents a case when there is no information to be gained by keeping the extra commit around. All rebase types have always dropped these commits, and no one to my knowledge has ever requested that we do otherwise. For many of the become empty cases (and likely even most), we will also be able to drop the commit without loss of information -- but this isn't quite always the case. Since these commits represent cases that were not clean cherry-picks, there is no upstream commit message explaining the same set of changes. Projects with good commit message hygiene will likely have the explanation from our commit message contained within or spread among the relevant upstream commits, but not all projects run that way. As such, the commit message of the commit being rebased may have reasoning that suggests additional changes that should be made to adapt to the new base, or it may have information that someone wants to add as a note to another commit, or perhaps someone even wants to create an empty commit with the commit message as-is. Junio commented on the "become-empty" types of commits as follows[1]: WRT a change that ends up being empty (as opposed to a change that is empty from the beginning), I'd think that the current behaviour is desireable one. "am" based rebase is solely to transplant an existing history and want to stop much less than "interactive" one whose purpose is to polish a series before making it publishable, and asking for confirmation ("this has become empty--do you want to drop it?") is more appropriate from the workflow point of view. [1] https://lore.kernel.org/git/xmqqfu1fswdh.fsf@gitster-ct.c.googlers.com/ I would simply add that his arguments for "am"-based rebases actually apply to all non-explicitly-interactive rebases. Also, since we are stating that different cases should have different defaults, it may be worth providing a flag to allow users to select which behavior they want for these commits. Introduce a new command line flag for selecting the desired behavior: --empty={drop,keep,ask} with the definitions: drop: drop commits which become empty keep: keep commits which become empty ask: provide the user a chance to interact and pick what to do with commits which become empty on a case-by-case basis In line with Junio's suggestion, if the --empty flag is not specified, pick defaults as follows: explicitly interactive: ask otherwise: drop Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-15 22:36:25 +01:00
int drop_redundant_commits;
int keep_redundant_commits;
int verbose;
int quiet;
int reschedule_failed_exec;
int committer_date_is_author_date;
int ignore_date;
int mainline;
char *gpg_sign;
enum commit_msg_cleanup_mode default_msg_cleanup;
int explicit_cleanup;
/* Merge strategy */
char *default_strategy; /* from config options */
char *strategy;
char **xopts;
size_t xopts_nr, xopts_alloc;
/* Used by fixup/squash */
struct strbuf current_fixups;
int current_fixup_count;
/* placeholder commit for -i --root */
struct object_id squash_onto;
int have_squash_onto;
/* Only used by REPLAY_NONE */
struct rev_info *revs;
};
sequencer: fix edit handling for cherry-pick and revert messages save_opts() should save any non-default values. It was intended to do this, but since most options in struct replay_opts default to 0, it only saved non-zero values. Unfortunately, this does not always work for options.edit. Roughly speaking, options.edit had a default value of 0 for cherry-pick but a default value of 1 for revert. Make save_opts() record a value whenever it differs from the default. options.edit was also overly simplistic; we had more than two cases. The behavior that previously existed was as follows: Non-conflict commits Right after Conflict revert Edit iff isatty(0) Edit (ignore isatty(0)) cherry-pick No edit See above Specify --edit Edit (ignore isatty(0)) See above Specify --no-edit (*) See above (*) Before stopping for conflicts, No edit is the behavior. After stopping for conflicts, the --no-edit flag is not saved so see the first two rows. However, the expected behavior is: Non-conflict commits Right after Conflict revert Edit iff isatty(0) Edit iff isatty(0) cherry-pick No edit Edit iff isatty(0) Specify --edit Edit (ignore isatty(0)) Edit (ignore isatty(0)) Specify --no-edit No edit No edit In order to get the expected behavior, we need to change options.edit to a tri-state: unspecified, false, or true. When specified, we follow what it says. When unspecified, we need to check whether the current commit being created is resolving a conflict as well as consulting options.action and isatty(0). While at it, add a should_edit() utility function that compresses options.edit down to a boolean based on the additional information for the non-conflict case. continue_single_pick() is the function responsible for resuming after conflict cases, regardless of whether there is one commit being picked or many. Make this function stop assuming edit behavior in all cases, so that it can correctly handle !isatty(0) and specific requests to not edit the commit message. Reported-by: Renato Botelho <garga@freebsd.org> Signed-off-by: Elijah Newren <newren@gmail.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-03-31 08:52:20 +02:00
#define REPLAY_OPTS_INIT { .edit = -1, .action = -1, .current_fixups = STRBUF_INIT }
/*
* Note that ordering matters in this enum. Not only must it match the mapping
* of todo_command_info (in sequencer.c), it is also divided into several
* sections that matter. When adding new commands, make sure you add it in the
* right section.
*/
enum todo_command {
/* commands that handle commits */
TODO_PICK = 0,
TODO_REVERT,
TODO_EDIT,
TODO_REWORD,
TODO_FIXUP,
TODO_SQUASH,
/* commands that do something else than handling a single commit */
TODO_EXEC,
TODO_BREAK,
TODO_LABEL,
TODO_RESET,
TODO_MERGE,
/* commands that do nothing but are counted for reporting progress */
TODO_NOOP,
TODO_DROP,
/* comments (not counted for reporting progress) */
TODO_COMMENT
};
struct todo_item {
enum todo_command command;
struct commit *commit;
unsigned int flags;
int arg_len;
/* The offset of the command and its argument in the strbuf */
size_t offset_in_buf, arg_offset;
};
struct todo_list {
struct strbuf buf;
struct todo_item *items;
int nr, alloc, current;
int done_nr, total_nr;
struct stat_data stat;
};
#define TODO_LIST_INIT { STRBUF_INIT }
int todo_list_parse_insn_buffer(struct repository *r, char *buf,
struct todo_list *todo_list);
int todo_list_write_to_file(struct repository *r, struct todo_list *todo_list,
const char *file, const char *shortrevisions,
const char *shortonto, int num, unsigned flags);
void todo_list_release(struct todo_list *todo_list);
const char *todo_item_get_arg(struct todo_list *todo_list,
struct todo_item *item);
/* Call this to setup defaults before parsing command line options */
void sequencer_init_config(struct replay_opts *opts);
int sequencer_pick_revisions(struct repository *repo,
struct replay_opts *opts);
int sequencer_continue(struct repository *repo, struct replay_opts *opts);
int sequencer_rollback(struct repository *repo, struct replay_opts *opts);
int sequencer_skip(struct repository *repo, struct replay_opts *opts);
int sequencer_remove_state(struct replay_opts *opts);
rebase: reinstate --no-keep-empty Commit d48e5e21da ("rebase (interactive-backend): make --keep-empty the default", 2020-02-15) turned --keep-empty (for keeping commits which start empty) into the default. The logic underpinning that commit was: 1) 'git commit' errors out on the creation of empty commits without an override flag 2) Once someone determines that the override is worthwhile, it's annoying and/or harmful to required them to take extra steps in order to keep such commits around (and to repeat such steps with every rebase). While the logic on which the decision was made is sound, the result was a bit of an overcorrection. Instead of jumping to having --keep-empty being the default, it jumped to making --keep-empty the only available behavior. There was a simple workaround, though, which was thought to be good enough at the time. People could still drop commits which started empty the same way the could drop any commits: by firing up an interactive rebase and picking out the commits they didn't want from the list. However, there are cases where external tools might create enough empty commits that picking all of them out is painful. As such, having a flag to automatically remove start-empty commits may be beneficial. Provide users a way to drop commits which start empty using a flag that existed for years: --no-keep-empty. Interpret --keep-empty as countermanding any previous --no-keep-empty, but otherwise leaving --keep-empty as the default. This might lead to some slight weirdness since commands like git rebase --empty=drop --keep-empty git rebase --empty=keep --no-keep-empty look really weird despite making perfect sense (the first will drop commits which become empty, but keep commits that started empty; the second will keep commits which become empty, but drop commits which started empty). However, --no-keep-empty was named years ago and we are predominantly keeping it for backward compatibility; also we suspect it will only be used rarely since folks already have a simple way to drop commits they don't want with an interactive rebase. Reported-by: Bryan Turner <bturner@atlassian.com> Reported-by: Sami Boukortt <sami@boukortt.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-11 04:44:25 +02:00
#define TODO_LIST_KEEP_EMPTY (1U << 0)
#define TODO_LIST_SHORTEN_IDS (1U << 1)
#define TODO_LIST_ABBREVIATE_CMDS (1U << 2)
#define TODO_LIST_REBASE_MERGES (1U << 3)
rebase -i: introduce --rebase-merges=[no-]rebase-cousins When running `git rebase --rebase-merges` non-interactively with an ancestor of HEAD as <upstream> (or leaving the todo list unmodified), we would ideally recreate the exact same commits as before the rebase. However, if there are commits in the commit range <upstream>.. that do not have <upstream> as direct ancestor (i.e. if `git log <upstream>..` would show commits that are omitted by `git log --ancestry-path <upstream>..`), this is currently not the case: we would turn them into commits that have <upstream> as direct ancestor. Let's illustrate that with a diagram: C / \ A - B - E - F \ / D Currently, after running `git rebase -i --rebase-merges B`, the new branch structure would be (pay particular attention to the commit `D`): --- C' -- / \ A - B ------ E' - F' \ / D' This is not really preserving the branch topology from before! The reason is that the commit `D` does not have `B` as ancestor, and therefore it gets rebased onto `B`. This is unintuitive behavior. Even worse, when recreating branch structure, most use cases would appear to want cousins *not* to be rebased onto the new base commit. For example, Git for Windows (the heaviest user of the Git garden shears, which served as the blueprint for --rebase-merges) frequently merges branches from `next` early, and these branches certainly do *not* want to be rebased. In the example above, the desired outcome would look like this: --- C' -- / \ A - B ------ E' - F' \ / -- D' -- Let's introduce the term "cousins" for such commits ("D" in the example), and let's not rebase them by default. For hypothetical use cases where cousins *do* need to be rebased, `git rebase --rebase=merges=rebase-cousins` needs to be used. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-25 14:29:40 +02:00
/*
* When rebasing merges, commits that do have the base commit as ancestor
* ("cousins") are *not* rebased onto the new base by default. If those
* commits should be rebased onto the new base, this flag needs to be passed.
*/
#define TODO_LIST_REBASE_COUSINS (1U << 4)
#define TODO_LIST_APPEND_TODO_HELP (1U << 5)
/*
* When generating a script that rebases merges with `--root` *and* with
* `--onto`, we do not want to re-generate the root commits.
*/
#define TODO_LIST_ROOT_WITH_ONTO (1U << 6)
#define TODO_LIST_REAPPLY_CHERRY_PICKS (1U << 7)
int sequencer_make_script(struct repository *r, struct strbuf *out, int argc,
const char **argv, unsigned flags);
void todo_list_add_exec_commands(struct todo_list *todo_list,
struct string_list *commands);
int complete_action(struct repository *r, struct replay_opts *opts, unsigned flags,
const char *shortrevisions, const char *onto_name,
struct commit *onto, const struct object_id *orig_head,
struct string_list *commands, unsigned autosquash,
struct todo_list *todo_list);
int todo_list_rearrange_squash(struct todo_list *todo_list);
/*
* Append a signoff to the commit message in "msgbuf". The ignore_footer
* parameter specifies the number of bytes at the end of msgbuf that should
* not be considered at all. I.e., they are not checked for existing trailers,
* and the new signoff will be spliced into the buffer before those bytes.
*/
void append_signoff(struct strbuf *msgbuf, size_t ignore_footer, unsigned flag);
void append_conflicts_hint(struct index_state *istate,
struct strbuf *msgbuf, enum commit_msg_cleanup_mode cleanup_mode);
enum commit_msg_cleanup_mode get_cleanup_mode(const char *cleanup_arg,
int use_editor);
void cleanup_message(struct strbuf *msgbuf,
enum commit_msg_cleanup_mode cleanup_mode, int verbose);
int message_is_empty(const struct strbuf *sb,
enum commit_msg_cleanup_mode cleanup_mode);
int template_untouched(const struct strbuf *sb, const char *template_file,
enum commit_msg_cleanup_mode cleanup_mode);
int update_head_with_reflog(const struct commit *old_head,
const struct object_id *new_head,
const char *action, const struct strbuf *msg,
struct strbuf *err);
void commit_post_rewrite(struct repository *r,
const struct commit *current_head,
const struct object_id *new_head);
void create_autostash(struct repository *r, const char *path,
const char *default_reflog_action);
int save_autostash(const char *path);
int apply_autostash(const char *path);
int apply_autostash_oid(const char *stash_oid);
commit: move print_commit_summary() to libgit Move print_commit_summary() from builtin/commit.c to sequencer.c so it can be shared with other commands. The function is modified by changing the last argument to a flag so callers can specify whether they want to show the author date in addition to specifying if this is an initial commit. If the sequencer dies in print_commit_summary() (which can only happen when cherry-picking or reverting) then neither the todo list nor the abort safety file are updated to reflect the commit that was just made. print_commit_summary() can die if: - The commit that was just created cannot be found or parsed. - HEAD cannot be resolved either because some other process is updating it (which is bad news in the middle of a cherry-pick) or because it is corrupt. - log_tree_commit() cannot read some objects. In all those cases dying will leave the sequencer in a sane state for aborting; 'git cherry-pick --abort' will rewind HEAD to the last successful commit before there was a problem with HEAD or the object database. If the user somehow fixes the problem and runs 'git cherry-pick --continue' then the sequencer will try and pick the same commit again which may or may not be what the user wants depending on what caused print_commit_summary() to die. If print_commit_summary() returned an error instead then update_abort_safety_file() would try to resolve HEAD which may or may not be successful. If it is successful then running 'git rebase --abort' would not rewind HEAD to the last successful commit which is not what we want. Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-24 12:07:54 +01:00
#define SUMMARY_INITIAL_COMMIT (1 << 0)
#define SUMMARY_SHOW_AUTHOR_DATE (1 << 1)
void print_commit_summary(struct repository *repo,
const char *prefix,
const struct object_id *oid,
commit: move print_commit_summary() to libgit Move print_commit_summary() from builtin/commit.c to sequencer.c so it can be shared with other commands. The function is modified by changing the last argument to a flag so callers can specify whether they want to show the author date in addition to specifying if this is an initial commit. If the sequencer dies in print_commit_summary() (which can only happen when cherry-picking or reverting) then neither the todo list nor the abort safety file are updated to reflect the commit that was just made. print_commit_summary() can die if: - The commit that was just created cannot be found or parsed. - HEAD cannot be resolved either because some other process is updating it (which is bad news in the middle of a cherry-pick) or because it is corrupt. - log_tree_commit() cannot read some objects. In all those cases dying will leave the sequencer in a sane state for aborting; 'git cherry-pick --abort' will rewind HEAD to the last successful commit before there was a problem with HEAD or the object database. If the user somehow fixes the problem and runs 'git cherry-pick --continue' then the sequencer will try and pick the same commit again which may or may not be what the user wants depending on what caused print_commit_summary() to die. If print_commit_summary() returned an error instead then update_abort_safety_file() would try to resolve HEAD which may or may not be successful. If it is successful then running 'git rebase --abort' would not rewind HEAD to the last successful commit which is not what we want. Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-24 12:07:54 +01:00
unsigned int flags);
#define READ_ONELINER_SKIP_IF_EMPTY (1 << 0)
#define READ_ONELINER_WARN_MISSING (1 << 1)
/*
* Reads a file that was presumably written by a shell script, i.e. with an
* end-of-line marker that needs to be stripped.
*
* Note that only the last end-of-line marker is stripped, consistent with the
* behavior of "$(cat path)" in a shell script.
*
* Returns 1 if the file was read, 0 if it could not be read or does not exist.
*/
int read_oneliner(struct strbuf *buf,
const char *path, unsigned flags);
int read_author_script(const char *path, char **name, char **email, char **date,
int allow_missing);
void parse_strategy_opts(struct replay_opts *opts, char *raw_opts);
int write_basic_state(struct replay_opts *opts, const char *head_name,
struct commit *onto, const struct object_id *orig_head);
void sequencer_post_commit_cleanup(struct repository *r, int verbose);
int sequencer_get_last_command(struct repository* r,
enum replay_action *action);
int sequencer_determine_whence(struct repository *r, enum commit_whence *whence);
#endif /* SEQUENCER_H */