undef/git-commit-vandalism
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
9085f8e279
git-commit-vandalism/config.mak.uname

554 lines
16 KiB
Plaintext
Raw Normal View History

Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
# Platform specific Makefile tweaks based on uname detection
uname_S := $(shell sh -c 'uname -s 2>/dev/null || echo not')
uname_M := $(shell sh -c 'uname -m 2>/dev/null || echo not')
uname_O := $(shell sh -c 'uname -o 2>/dev/null || echo not')
uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not')
uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not')
uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
ifdef MSVC
# avoid the MingW and Cygwin configuration sections
uname_S := Windows
uname_O := Windows
endif
# We choose to avoid "if .. else if .. else .. endif endif"
# because maintaining the nesting to match is a pain. If
# we had "elif" things would have been much nicer...
ifeq ($(uname_M),x86_64)
XDL_FAST_HASH = YesPlease
endif
ifeq ($(uname_S),OSF1)
# Need this for u_short definitions et al
BASIC_CFLAGS += -D_OSF_SOURCE
SOCKLEN_T = int
NO_STRTOULL = YesPlease
NO_NSEC = YesPlease
endif
ifeq ($(uname_S),Linux)
Portable alloca for Git In the next patch we'll have to use alloca() for performance reasons, but since alloca is non-standardized and is not portable, let's have a trick with compatibility wrappers: 1. at configure time, determine, do we have working alloca() through alloca.h, and define #define HAVE_ALLOCA_H if yes. 2. in code #ifdef HAVE_ALLOCA_H # include <alloca.h> # define xalloca(size) (alloca(size)) # define xalloca_free(p) do {} while(0) #else # define xalloca(size) (xmalloc(size)) # define xalloca_free(p) (free(p)) #endif and use it like func() { p = xalloca(size); ... xalloca_free(p); } This way, for systems, where alloca is available, we'll have optimal on-stack allocations with fast executions. On the other hand, on systems, where alloca is not available, this gracefully fallbacks to xmalloc/free. Both autoconf and config.mak.uname configurations were updated. For autoconf, we are not bothering considering cases, when no alloca.h is available, but alloca() works some other way - its simply alloca.h is available and works or not, everything else is deep legacy. For config.mak.uname, I've tried to make my almost-sure guess for where alloca() is available, but since I only have access to Linux it is the only change I can be sure about myself, with relevant to other changed systems people Cc'ed. NOTE SunOS and Windows had explicit -DHAVE_ALLOCA_H in their configurations. I've changed that to now-common HAVE_ALLOCA_H=YesPlease which should be correct. Cc: Brandon Casey <drafnel@gmail.com> Cc: Marius Storm-Olsen <mstormo@gmail.com> Cc: Johannes Sixt <j6t@kdbg.org> Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Cc: Gerrit Pape <pape@smarden.org> Cc: Petr Salinger <Petr.Salinger@seznam.cz> Cc: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Thomas Schwinge <thomas@codesourcery.com> (GNU Hurd changes) Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-27 15:22:50 +01:00
HAVE_ALLOCA_H = YesPlease
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
NO_STRLCPY = YesPlease
NO_MKSTEMPS = YesPlease
HAVE_PATHS_H = YesPlease
LIBC_CONTAINS_LIBINTL = YesPlease
HAVE_DEV_TTY = YesPlease
trace: add high resolution timer function to debug performance issues Add a getnanotime() function that returns nanoseconds since 01/01/1970 as unsigned 64-bit integer (i.e. overflows in july 2554). This is easier to work with than e.g. struct timeval or struct timespec. Basing the timer on the epoch allows using the results with other time-related APIs. To simplify adaption to different platforms, split the implementation into a common getnanotime() and a platform-specific highres_nanos() function. The common getnanotime() function handles errors, falling back to gettimeofday() if highres_nanos() isn't implemented or doesn't work. getnanotime() is also responsible for normalizing to the epoch. The offset to the system clock is calculated only once on initialization, i.e. manually setting the system clock has no impact on the timer (except if the fallback gettimeofday() is in use). Git processes are typically short lived, so we don't need to handle clock drift. The highres_nanos() function returns monotonically increasing nanoseconds relative to some arbitrary point in time (e.g. system boot), or 0 on failure. Providing platform-specific implementations should be relatively easy, e.g. adapting to clock_gettime() as defined by the POSIX realtime extensions is seven lines of code. This version includes highres_nanos() implementations for: * Linux: using clock_gettime(CLOCK_MONOTONIC) * Windows: using QueryPerformanceCounter() Todo: * enable clock_gettime() on more platforms * add Mac OSX version, e.g. using mach_absolute_time + mach_timebase_info Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-07-12 02:05:42 +02:00
HAVE_CLOCK_GETTIME = YesPlease
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
endif
ifeq ($(uname_S),GNU/kFreeBSD)
Portable alloca for Git In the next patch we'll have to use alloca() for performance reasons, but since alloca is non-standardized and is not portable, let's have a trick with compatibility wrappers: 1. at configure time, determine, do we have working alloca() through alloca.h, and define #define HAVE_ALLOCA_H if yes. 2. in code #ifdef HAVE_ALLOCA_H # include <alloca.h> # define xalloca(size) (alloca(size)) # define xalloca_free(p) do {} while(0) #else # define xalloca(size) (xmalloc(size)) # define xalloca_free(p) (free(p)) #endif and use it like func() { p = xalloca(size); ... xalloca_free(p); } This way, for systems, where alloca is available, we'll have optimal on-stack allocations with fast executions. On the other hand, on systems, where alloca is not available, this gracefully fallbacks to xmalloc/free. Both autoconf and config.mak.uname configurations were updated. For autoconf, we are not bothering considering cases, when no alloca.h is available, but alloca() works some other way - its simply alloca.h is available and works or not, everything else is deep legacy. For config.mak.uname, I've tried to make my almost-sure guess for where alloca() is available, but since I only have access to Linux it is the only change I can be sure about myself, with relevant to other changed systems people Cc'ed. NOTE SunOS and Windows had explicit -DHAVE_ALLOCA_H in their configurations. I've changed that to now-common HAVE_ALLOCA_H=YesPlease which should be correct. Cc: Brandon Casey <drafnel@gmail.com> Cc: Marius Storm-Olsen <mstormo@gmail.com> Cc: Johannes Sixt <j6t@kdbg.org> Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Cc: Gerrit Pape <pape@smarden.org> Cc: Petr Salinger <Petr.Salinger@seznam.cz> Cc: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Thomas Schwinge <thomas@codesourcery.com> (GNU Hurd changes) Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-27 15:22:50 +01:00
HAVE_ALLOCA_H = YesPlease
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
NO_STRLCPY = YesPlease
NO_MKSTEMPS = YesPlease
HAVE_PATHS_H = YesPlease
DIR_HAS_BSD_GROUP_SEMANTICS = YesPlease
LIBC_CONTAINS_LIBINTL = YesPlease
endif
ifeq ($(uname_S),UnixWare)
CC = cc
NEEDS_SOCKET = YesPlease
NEEDS_NSL = YesPlease
NEEDS_SSL_WITH_CRYPTO = YesPlease
NEEDS_LIBICONV = YesPlease
SHELL_PATH = /usr/local/bin/bash
NO_IPV6 = YesPlease
NO_HSTRERROR = YesPlease
NO_MKSTEMPS = YesPlease
BASIC_CFLAGS += -Kthread
BASIC_CFLAGS += -I/usr/local/include
BASIC_LDFLAGS += -L/usr/local/lib
INSTALL = ginstall
TAR = gtar
NO_STRCASESTR = YesPlease
NO_MEMMEM = YesPlease
endif
ifeq ($(uname_S),SCO_SV)
ifeq ($(uname_R),3.2)
CFLAGS = -O2
endif
ifeq ($(uname_R),5)
CC = cc
BASIC_CFLAGS += -Kthread
endif
NEEDS_SOCKET = YesPlease
NEEDS_NSL = YesPlease
NEEDS_SSL_WITH_CRYPTO = YesPlease
NEEDS_LIBICONV = YesPlease
SHELL_PATH = /usr/bin/bash
NO_IPV6 = YesPlease
NO_HSTRERROR = YesPlease
NO_MKSTEMPS = YesPlease
BASIC_CFLAGS += -I/usr/local/include
BASIC_LDFLAGS += -L/usr/local/lib
NO_STRCASESTR = YesPlease
NO_MEMMEM = YesPlease
INSTALL = ginstall
TAR = gtar
endif
ifeq ($(uname_S),Darwin)
NEEDS_CRYPTO_WITH_SSL = YesPlease
NEEDS_SSL_WITH_CRYPTO = YesPlease
NEEDS_LIBICONV = YesPlease
config.mak.uname: add hint on uname_R for MacOS X I always have to scratch my head every time I see this cryptic pattern "[15678]\."; leave a short note to remind the maintainer and the reviewers. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-15 19:02:46 +02:00
# Note: $(uname_R) gives us the underlying Darwin version.
# - MacOS 10.0.* and MacOS 10.1.0 = Darwin 1.*
# - MacOS 10.x.* = Darwin (x+4).* for (1 <= x)
# i.e. "begins with [15678] and a dot" means "10.4.* or older".
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
ifeq ($(shell expr "$(uname_R)" : '[15678]\.'),2)
OLD_ICONV = UnfortunatelyYes
config.mak.uname: set NO_APPLE_COMMON_CRYPTO on older systems Older MacOS systems prior to 10.5 do not have the CommonCrypto support Git uses so set NO_APPLE_COMMON_CRYPTO on those systems. Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-15 09:46:11 +02:00
NO_APPLE_COMMON_CRYPTO = YesPlease
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
endif
ifeq ($(shell expr "$(uname_R)" : '[15]\.'),2)
NO_STRLCPY = YesPlease
endif
NO_MEMMEM = YesPlease
USE_ST_TIMESPEC = YesPlease
HAVE_DEV_TTY = YesPlease
COMPAT_OBJS += compat/precompose_utf8.o
BASIC_CFLAGS += -DPRECOMPOSE_UNICODE
endif
ifeq ($(uname_S),SunOS)
NEEDS_SOCKET = YesPlease
NEEDS_NSL = YesPlease
SHELL_PATH = /bin/bash
SANE_TOOL_PATH = /usr/xpg6/bin:/usr/xpg4/bin
Portable alloca for Git In the next patch we'll have to use alloca() for performance reasons, but since alloca is non-standardized and is not portable, let's have a trick with compatibility wrappers: 1. at configure time, determine, do we have working alloca() through alloca.h, and define #define HAVE_ALLOCA_H if yes. 2. in code #ifdef HAVE_ALLOCA_H # include <alloca.h> # define xalloca(size) (alloca(size)) # define xalloca_free(p) do {} while(0) #else # define xalloca(size) (xmalloc(size)) # define xalloca_free(p) (free(p)) #endif and use it like func() { p = xalloca(size); ... xalloca_free(p); } This way, for systems, where alloca is available, we'll have optimal on-stack allocations with fast executions. On the other hand, on systems, where alloca is not available, this gracefully fallbacks to xmalloc/free. Both autoconf and config.mak.uname configurations were updated. For autoconf, we are not bothering considering cases, when no alloca.h is available, but alloca() works some other way - its simply alloca.h is available and works or not, everything else is deep legacy. For config.mak.uname, I've tried to make my almost-sure guess for where alloca() is available, but since I only have access to Linux it is the only change I can be sure about myself, with relevant to other changed systems people Cc'ed. NOTE SunOS and Windows had explicit -DHAVE_ALLOCA_H in their configurations. I've changed that to now-common HAVE_ALLOCA_H=YesPlease which should be correct. Cc: Brandon Casey <drafnel@gmail.com> Cc: Marius Storm-Olsen <mstormo@gmail.com> Cc: Johannes Sixt <j6t@kdbg.org> Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Cc: Gerrit Pape <pape@smarden.org> Cc: Petr Salinger <Petr.Salinger@seznam.cz> Cc: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Thomas Schwinge <thomas@codesourcery.com> (GNU Hurd changes) Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-27 15:22:50 +01:00
HAVE_ALLOCA_H = YesPlease
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
NO_STRCASESTR = YesPlease
NO_MEMMEM = YesPlease
NO_MKDTEMP = YesPlease
NO_MKSTEMPS = YesPlease
NO_REGEX = YesPlease
NO_MSGFMT_EXTENDED_OPTIONS = YesPlease
HAVE_DEV_TTY = YesPlease
ifeq ($(uname_R),5.6)
SOCKLEN_T = int
NO_HSTRERROR = YesPlease
NO_IPV6 = YesPlease
NO_SOCKADDR_STORAGE = YesPlease
NO_UNSETENV = YesPlease
NO_SETENV = YesPlease
NO_STRLCPY = YesPlease
NO_STRTOUMAX = YesPlease
GIT_TEST_CMP = cmp
endif
ifeq ($(uname_R),5.7)
NEEDS_RESOLV = YesPlease
NO_IPV6 = YesPlease
NO_SOCKADDR_STORAGE = YesPlease
NO_UNSETENV = YesPlease
NO_SETENV = YesPlease
NO_STRLCPY = YesPlease
NO_STRTOUMAX = YesPlease
GIT_TEST_CMP = cmp
endif
ifeq ($(uname_R),5.8)
NO_UNSETENV = YesPlease
NO_SETENV = YesPlease
NO_STRTOUMAX = YesPlease
GIT_TEST_CMP = cmp
endif
ifeq ($(uname_R),5.9)
NO_UNSETENV = YesPlease
NO_SETENV = YesPlease
NO_STRTOUMAX = YesPlease
GIT_TEST_CMP = cmp
endif
INSTALL = /usr/ucb/install
TAR = gtar
Portable alloca for Git In the next patch we'll have to use alloca() for performance reasons, but since alloca is non-standardized and is not portable, let's have a trick with compatibility wrappers: 1. at configure time, determine, do we have working alloca() through alloca.h, and define #define HAVE_ALLOCA_H if yes. 2. in code #ifdef HAVE_ALLOCA_H # include <alloca.h> # define xalloca(size) (alloca(size)) # define xalloca_free(p) do {} while(0) #else # define xalloca(size) (xmalloc(size)) # define xalloca_free(p) (free(p)) #endif and use it like func() { p = xalloca(size); ... xalloca_free(p); } This way, for systems, where alloca is available, we'll have optimal on-stack allocations with fast executions. On the other hand, on systems, where alloca is not available, this gracefully fallbacks to xmalloc/free. Both autoconf and config.mak.uname configurations were updated. For autoconf, we are not bothering considering cases, when no alloca.h is available, but alloca() works some other way - its simply alloca.h is available and works or not, everything else is deep legacy. For config.mak.uname, I've tried to make my almost-sure guess for where alloca() is available, but since I only have access to Linux it is the only change I can be sure about myself, with relevant to other changed systems people Cc'ed. NOTE SunOS and Windows had explicit -DHAVE_ALLOCA_H in their configurations. I've changed that to now-common HAVE_ALLOCA_H=YesPlease which should be correct. Cc: Brandon Casey <drafnel@gmail.com> Cc: Marius Storm-Olsen <mstormo@gmail.com> Cc: Johannes Sixt <j6t@kdbg.org> Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Cc: Gerrit Pape <pape@smarden.org> Cc: Petr Salinger <Petr.Salinger@seznam.cz> Cc: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Thomas Schwinge <thomas@codesourcery.com> (GNU Hurd changes) Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-27 15:22:50 +01:00
BASIC_CFLAGS += -D__EXTENSIONS__ -D__sun__
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
endif
ifeq ($(uname_O),Cygwin)
ifeq ($(shell expr "$(uname_R)" : '1\.[1-6]\.'),4)
NO_D_TYPE_IN_DIRENT = YesPlease
NO_D_INO_IN_DIRENT = YesPlease
NO_STRCASESTR = YesPlease
NO_MEMMEM = YesPlease
NO_MKSTEMPS = YesPlease
NO_SYMLINK_HEAD = YesPlease
NO_IPV6 = YesPlease
OLD_ICONV = UnfortunatelyYes
Cygwin 1.7 supports mmap git has shipped for years with MMAP enabled in the stock distribution, there are no reports of problems / failures on the list relating to this. Leave the default as-is on v1.5 due to lack of knowlege of this working on earlier Cygwin. Signed-off-by: Mark Levedahl <mlevedahl@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-20 01:08:30 +02:00
# There are conflicting reports about this.
# On some boxes NO_MMAP is needed, and not so elsewhere.
# Try commenting this out if you suspect MMAP is more efficient
NO_MMAP = YesPlease
Cygwin 1.7 needs compat/regex Cygwin v1.7 uses the regex library from newlib which does not pass git's tests, so don't use it. This fixes failures in t4018 and t4034. Continue to use the platform supplied regex library for earlier versions. Signed-off-by: Mark Levedahl <mlevedahl@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-20 01:08:28 +02:00
else
NO_REGEX = UnfortunatelyYes
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
endif
Portable alloca for Git In the next patch we'll have to use alloca() for performance reasons, but since alloca is non-standardized and is not portable, let's have a trick with compatibility wrappers: 1. at configure time, determine, do we have working alloca() through alloca.h, and define #define HAVE_ALLOCA_H if yes. 2. in code #ifdef HAVE_ALLOCA_H # include <alloca.h> # define xalloca(size) (alloca(size)) # define xalloca_free(p) do {} while(0) #else # define xalloca(size) (xmalloc(size)) # define xalloca_free(p) (free(p)) #endif and use it like func() { p = xalloca(size); ... xalloca_free(p); } This way, for systems, where alloca is available, we'll have optimal on-stack allocations with fast executions. On the other hand, on systems, where alloca is not available, this gracefully fallbacks to xmalloc/free. Both autoconf and config.mak.uname configurations were updated. For autoconf, we are not bothering considering cases, when no alloca.h is available, but alloca() works some other way - its simply alloca.h is available and works or not, everything else is deep legacy. For config.mak.uname, I've tried to make my almost-sure guess for where alloca() is available, but since I only have access to Linux it is the only change I can be sure about myself, with relevant to other changed systems people Cc'ed. NOTE SunOS and Windows had explicit -DHAVE_ALLOCA_H in their configurations. I've changed that to now-common HAVE_ALLOCA_H=YesPlease which should be correct. Cc: Brandon Casey <drafnel@gmail.com> Cc: Marius Storm-Olsen <mstormo@gmail.com> Cc: Johannes Sixt <j6t@kdbg.org> Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Cc: Gerrit Pape <pape@smarden.org> Cc: Petr Salinger <Petr.Salinger@seznam.cz> Cc: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Thomas Schwinge <thomas@codesourcery.com> (GNU Hurd changes) Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-27 15:22:50 +01:00
HAVE_ALLOCA_H = YesPlease
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
NEEDS_LIBICONV = YesPlease
NO_FAST_WORKING_DIRECTORY = UnfortunatelyYes
NO_ST_BLOCKS_IN_STRUCT_STAT = YesPlease
X = .exe
UNRELIABLE_FSTAT = UnfortunatelyYes
SPARSE_FLAGS = -isystem /usr/include/w32api -Wno-one-bit-signed-bitfield
endif
ifeq ($(uname_S),FreeBSD)
NEEDS_LIBICONV = YesPlease
OLD_ICONV = YesPlease
NO_MEMMEM = YesPlease
BASIC_CFLAGS += -I/usr/local/include
BASIC_LDFLAGS += -L/usr/local/lib
DIR_HAS_BSD_GROUP_SEMANTICS = YesPlease
USE_ST_TIMESPEC = YesPlease
ifeq ($(shell expr "$(uname_R)" : '4\.'),2)
PTHREAD_LIBS = -pthread
NO_UINTMAX_T = YesPlease
NO_STRTOUMAX = YesPlease
endif
PYTHON_PATH = /usr/local/bin/python
HAVE_PATHS_H = YesPlease
date: recognize bogus FreeBSD gmtime output Most gmtime implementations return a NULL value when they encounter an error (and this behavior is specified by ANSI C and POSIX). FreeBSD's implementation, however, will simply leave the "struct tm" untouched. Let's also recognize this and convert it to a NULL (with this patch, t4212 should pass on FreeBSD). Reported-by: René Scharfe <l.s.r@web.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-01 23:28:42 +02:00
GMTIME_UNRELIABLE_ERRORS = UnfortunatelyYes
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
endif
ifeq ($(uname_S),OpenBSD)
NO_STRCASESTR = YesPlease
NO_MEMMEM = YesPlease
USE_ST_TIMESPEC = YesPlease
NEEDS_LIBICONV = YesPlease
BASIC_CFLAGS += -I/usr/local/include
BASIC_LDFLAGS += -L/usr/local/lib
HAVE_PATHS_H = YesPlease
Add MirBSD support to the build system. Add an entry into the table of supported OSes. Do not set _XOPEN_SOURCE (contrary to OpenBSD) because that disables the u_short and u_long typedefs, which are used unconditionally in various other header files. Signed-off-by: Benny Siegert <bsiegert@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-31 15:36:45 +01:00
endif
ifeq ($(uname_S),MirBSD)
NO_STRCASESTR = YesPlease
NO_MEMMEM = YesPlease
USE_ST_TIMESPEC = YesPlease
NEEDS_LIBICONV = YesPlease
HAVE_PATHS_H = YesPlease
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
endif
ifeq ($(uname_S),NetBSD)
ifeq ($(shell expr "$(uname_R)" : '[01]\.'),2)
NEEDS_LIBICONV = YesPlease
endif
BASIC_CFLAGS += -I/usr/pkg/include
BASIC_LDFLAGS += -L/usr/pkg/lib $(CC_LD_DYNPATH)/usr/pkg/lib
USE_ST_TIMESPEC = YesPlease
NO_MKSTEMPS = YesPlease
HAVE_PATHS_H = YesPlease
endif
ifeq ($(uname_S),AIX)
DEFAULT_PAGER = more
NO_STRCASESTR = YesPlease
NO_MEMMEM = YesPlease
NO_MKDTEMP = YesPlease
NO_MKSTEMPS = YesPlease
NO_STRLCPY = YesPlease
NO_NSEC = YesPlease
FREAD_READS_DIRECTORIES = UnfortunatelyYes
INTERNAL_QSORT = UnfortunatelyYes
NEEDS_LIBICONV = YesPlease
BASIC_CFLAGS += -D_LARGE_FILES
ifeq ($(shell expr "$(uname_V)" : '[1234]'),1)
NO_PTHREADS = YesPlease
else
PTHREAD_LIBS = -lpthread
endif
ifeq ($(shell expr "$(uname_V).$(uname_R)" : '5\.1'),3)
INLINE = ''
endif
GIT_TEST_CMP = cmp
endif
ifeq ($(uname_S),GNU)
# GNU/Hurd
Portable alloca for Git In the next patch we'll have to use alloca() for performance reasons, but since alloca is non-standardized and is not portable, let's have a trick with compatibility wrappers: 1. at configure time, determine, do we have working alloca() through alloca.h, and define #define HAVE_ALLOCA_H if yes. 2. in code #ifdef HAVE_ALLOCA_H # include <alloca.h> # define xalloca(size) (alloca(size)) # define xalloca_free(p) do {} while(0) #else # define xalloca(size) (xmalloc(size)) # define xalloca_free(p) (free(p)) #endif and use it like func() { p = xalloca(size); ... xalloca_free(p); } This way, for systems, where alloca is available, we'll have optimal on-stack allocations with fast executions. On the other hand, on systems, where alloca is not available, this gracefully fallbacks to xmalloc/free. Both autoconf and config.mak.uname configurations were updated. For autoconf, we are not bothering considering cases, when no alloca.h is available, but alloca() works some other way - its simply alloca.h is available and works or not, everything else is deep legacy. For config.mak.uname, I've tried to make my almost-sure guess for where alloca() is available, but since I only have access to Linux it is the only change I can be sure about myself, with relevant to other changed systems people Cc'ed. NOTE SunOS and Windows had explicit -DHAVE_ALLOCA_H in their configurations. I've changed that to now-common HAVE_ALLOCA_H=YesPlease which should be correct. Cc: Brandon Casey <drafnel@gmail.com> Cc: Marius Storm-Olsen <mstormo@gmail.com> Cc: Johannes Sixt <j6t@kdbg.org> Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Cc: Gerrit Pape <pape@smarden.org> Cc: Petr Salinger <Petr.Salinger@seznam.cz> Cc: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Thomas Schwinge <thomas@codesourcery.com> (GNU Hurd changes) Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-27 15:22:50 +01:00
HAVE_ALLOCA_H = YesPlease
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
NO_STRLCPY = YesPlease
NO_MKSTEMPS = YesPlease
HAVE_PATHS_H = YesPlease
LIBC_CONTAINS_LIBINTL = YesPlease
endif
ifeq ($(uname_S),IRIX)
NO_SETENV = YesPlease
NO_UNSETENV = YesPlease
NO_STRCASESTR = YesPlease
NO_MEMMEM = YesPlease
NO_MKSTEMPS = YesPlease
NO_MKDTEMP = YesPlease
# When compiled with the MIPSpro 7.4.4m compiler, and without pthreads
# (i.e. NO_PTHREADS is set), and _with_ MMAP (i.e. NO_MMAP is not set),
# git dies with a segmentation fault when trying to access the first
# entry of a reflog. The conservative choice is made to always set
# NO_MMAP. If you suspect that your compiler is not affected by this
# issue, comment out the NO_MMAP statement.
NO_MMAP = YesPlease
NO_REGEX = YesPlease
SNPRINTF_RETURNS_BOGUS = YesPlease
SHELL_PATH = /usr/gnu/bin/bash
NEEDS_LIBGEN = YesPlease
endif
ifeq ($(uname_S),IRIX64)
NO_SETENV = YesPlease
NO_UNSETENV = YesPlease
NO_STRCASESTR = YesPlease
NO_MEMMEM = YesPlease
NO_MKSTEMPS = YesPlease
NO_MKDTEMP = YesPlease
# When compiled with the MIPSpro 7.4.4m compiler, and without pthreads
# (i.e. NO_PTHREADS is set), and _with_ MMAP (i.e. NO_MMAP is not set),
# git dies with a segmentation fault when trying to access the first
# entry of a reflog. The conservative choice is made to always set
# NO_MMAP. If you suspect that your compiler is not affected by this
# issue, comment out the NO_MMAP statement.
NO_MMAP = YesPlease
NO_REGEX = YesPlease
SNPRINTF_RETURNS_BOGUS = YesPlease
SHELL_PATH = /usr/gnu/bin/bash
NEEDS_LIBGEN = YesPlease
endif
ifeq ($(uname_S),HP-UX)
INLINE = __inline
NO_IPV6 = YesPlease
NO_SETENV = YesPlease
NO_STRCASESTR = YesPlease
NO_MEMMEM = YesPlease
NO_MKSTEMPS = YesPlease
NO_STRLCPY = YesPlease
NO_MKDTEMP = YesPlease
NO_UNSETENV = YesPlease
NO_HSTRERROR = YesPlease
NO_SYS_SELECT_H = YesPlease
SNPRINTF_RETURNS_BOGUS = YesPlease
NO_NSEC = YesPlease
ifeq ($(uname_R),B.11.00)
NO_INET_NTOP = YesPlease
NO_INET_PTON = YesPlease
endif
ifeq ($(uname_R),B.10.20)
# Override HP-UX 11.x setting:
INLINE =
SOCKLEN_T = size_t
NO_PREAD = YesPlease
NO_INET_NTOP = YesPlease
NO_INET_PTON = YesPlease
endif
GIT_TEST_CMP = cmp
endif
ifeq ($(uname_S),Windows)
GIT_VERSION := $(GIT_VERSION).MSVC
pathsep = ;
Portable alloca for Git In the next patch we'll have to use alloca() for performance reasons, but since alloca is non-standardized and is not portable, let's have a trick with compatibility wrappers: 1. at configure time, determine, do we have working alloca() through alloca.h, and define #define HAVE_ALLOCA_H if yes. 2. in code #ifdef HAVE_ALLOCA_H # include <alloca.h> # define xalloca(size) (alloca(size)) # define xalloca_free(p) do {} while(0) #else # define xalloca(size) (xmalloc(size)) # define xalloca_free(p) (free(p)) #endif and use it like func() { p = xalloca(size); ... xalloca_free(p); } This way, for systems, where alloca is available, we'll have optimal on-stack allocations with fast executions. On the other hand, on systems, where alloca is not available, this gracefully fallbacks to xmalloc/free. Both autoconf and config.mak.uname configurations were updated. For autoconf, we are not bothering considering cases, when no alloca.h is available, but alloca() works some other way - its simply alloca.h is available and works or not, everything else is deep legacy. For config.mak.uname, I've tried to make my almost-sure guess for where alloca() is available, but since I only have access to Linux it is the only change I can be sure about myself, with relevant to other changed systems people Cc'ed. NOTE SunOS and Windows had explicit -DHAVE_ALLOCA_H in their configurations. I've changed that to now-common HAVE_ALLOCA_H=YesPlease which should be correct. Cc: Brandon Casey <drafnel@gmail.com> Cc: Marius Storm-Olsen <mstormo@gmail.com> Cc: Johannes Sixt <j6t@kdbg.org> Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Cc: Gerrit Pape <pape@smarden.org> Cc: Petr Salinger <Petr.Salinger@seznam.cz> Cc: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Thomas Schwinge <thomas@codesourcery.com> (GNU Hurd changes) Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-27 15:22:50 +01:00
HAVE_ALLOCA_H = YesPlease
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
NO_PREAD = YesPlease
NEEDS_CRYPTO_WITH_SSL = YesPlease
NO_LIBGEN_H = YesPlease
NO_POLL = YesPlease
NO_SYMLINK_HEAD = YesPlease
NO_IPV6 = YesPlease
NO_UNIX_SOCKETS = YesPlease
NO_SETENV = YesPlease
NO_STRCASESTR = YesPlease
NO_STRLCPY = YesPlease
NO_MEMMEM = YesPlease
# NEEDS_LIBICONV = YesPlease
NO_ICONV = YesPlease
NO_STRTOUMAX = YesPlease
NO_MKDTEMP = YesPlease
NO_MKSTEMPS = YesPlease
SNPRINTF_RETURNS_BOGUS = YesPlease
NO_SVN_TESTS = YesPlease
RUNTIME_PREFIX = YesPlease
NO_ST_BLOCKS_IN_STRUCT_STAT = YesPlease
NO_NSEC = YesPlease
USE_WIN32_MMAP = YesPlease
# USE_NED_ALLOCATOR = YesPlease
UNRELIABLE_FSTAT = UnfortunatelyYes
OBJECT_CREATION_USES_RENAMES = UnfortunatelyNeedsTo
NO_REGEX = YesPlease
MSVC: fix compile errors due to missing libintl.h Set NO_GETTEXT in config.mak.uname to get rid of libintl.h dependency. Signed-off-by: Karsten Blees <blees@dcon.de> Acked-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-11 01:21:53 +02:00
NO_GETTEXT = YesPlease
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
NO_PYTHON = YesPlease
BLK_SHA1 = YesPlease
msvc: avoid collisions between "tags" and "TAGS" Commit 2f769195 ("MinGW: avoid collisions between "tags" and "TAGS", 28-09-2010) enabled MinGW to use an ETAGS file in order to avoid filename collisions on (Windows) case insensitive filesystems. In addition, this prevents 'make' from issuing several warning messages. When using the Makefile to perform an MSVC build, which is usually executed using MinGW tools, we can also benefit from this capability. In order to reap the above benefits, we set the ETAGS_TARGET build variable to ETAGS in the MSVC config block. Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Tested-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-31 19:33:57 +01:00
ETAGS_TARGET = ETAGS
msvc: git-daemon: Fix linker "unresolved external" errors In particular, while linking git-daemon.exe, the linker complains that the external symbols _inet_pton and _inet_ntop are unresolved. Commit a666b472 ("daemon: opt-out on features that require posix", 04-11-2010) addressed this problem for MinGW by configuring the use of the internal 'compat' versions of these function. Although the MSVC header <WS2tcpip.h> contains the prototypes for the inet_pton and inet_ntop functions, they are only visible for Windows API versions from 0x0600 (Windows Vista) or later. (In addition, on Windows XP, ws2_32.dll does not export these symbols). In order to fix the linker errors, we also configure the MSVC build to use the internal compat versions of these functions by setting the NO_INET_{PTON,NTOP} build variables. Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Tested-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-31 19:30:14 +01:00
NO_INET_PTON = YesPlease
NO_INET_NTOP = YesPlease
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
NO_POSIX_GOODIES = UnfortunatelyYes
NATIVE_CRLF = YesPlease
DEFAULT_HELP_FORMAT = html
Win32 dirent: remove unused dirent.d_ino member There are no proper inodes on Windows, so remove dirent.d_ino and #define NO_D_INO_IN_DIRENT in the Makefile (this skips e.g. an ineffective qsort in fsck.c). Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Stepan Kasal <kasal@ucw.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-07 17:34:33 +01:00
NO_D_INO_IN_DIRENT = YesPlease
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
CC = compat/vcbuild/scripts/clink.pl
AR = compat/vcbuild/scripts/lib.pl
CFLAGS =
BASIC_CFLAGS = -nologo -I. -I../zlib -Icompat/vcbuild -Icompat/vcbuild/include -DWIN32 -D_CONSOLE -DHAVE_STRING_H -D_CRT_SECURE_NO_WARNINGS -D_CRT_NONSTDC_NO_DEPRECATE
COMPAT_OBJS = compat/msvc.o compat/winansi.o \
compat/win32/pthread.o compat/win32/syslog.o \
compat/win32/dirent.o
Portable alloca for Git In the next patch we'll have to use alloca() for performance reasons, but since alloca is non-standardized and is not portable, let's have a trick with compatibility wrappers: 1. at configure time, determine, do we have working alloca() through alloca.h, and define #define HAVE_ALLOCA_H if yes. 2. in code #ifdef HAVE_ALLOCA_H # include <alloca.h> # define xalloca(size) (alloca(size)) # define xalloca_free(p) do {} while(0) #else # define xalloca(size) (xmalloc(size)) # define xalloca_free(p) (free(p)) #endif and use it like func() { p = xalloca(size); ... xalloca_free(p); } This way, for systems, where alloca is available, we'll have optimal on-stack allocations with fast executions. On the other hand, on systems, where alloca is not available, this gracefully fallbacks to xmalloc/free. Both autoconf and config.mak.uname configurations were updated. For autoconf, we are not bothering considering cases, when no alloca.h is available, but alloca() works some other way - its simply alloca.h is available and works or not, everything else is deep legacy. For config.mak.uname, I've tried to make my almost-sure guess for where alloca() is available, but since I only have access to Linux it is the only change I can be sure about myself, with relevant to other changed systems people Cc'ed. NOTE SunOS and Windows had explicit -DHAVE_ALLOCA_H in their configurations. I've changed that to now-common HAVE_ALLOCA_H=YesPlease which should be correct. Cc: Brandon Casey <drafnel@gmail.com> Cc: Marius Storm-Olsen <mstormo@gmail.com> Cc: Johannes Sixt <j6t@kdbg.org> Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Cc: Gerrit Pape <pape@smarden.org> Cc: Petr Salinger <Petr.Salinger@seznam.cz> Cc: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Thomas Schwinge <thomas@codesourcery.com> (GNU Hurd changes) Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-27 15:22:50 +01:00
COMPAT_CFLAGS = -D__USE_MINGW_ACCESS -DNOGDI -DHAVE_STRING_H -Icompat -Icompat/regex -Icompat/win32 -DSTRIP_EXTENSION=\".exe\"
MSVC: link dynamically to the CRT Dynamic linking is generally preferred over static linking, and MSVCRT.dll has been integral part of Windows for a long time. This also fixes linker warnings for _malloc and _free in zlib.lib, which seems to be compiled for MSVCRT.dll already. The DLL version also exports some of the CRT initialization functions, which are hidden in the static libcmt.lib (e.g. __wgetmainargs, required by subsequent Unicode patches). Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Stepan Kasal <kasal@ucw.cz> Acked-by: Sebastian Schuberth <sschuberth@gmail.com> Acked-by: Marat Radchenko <marat@slonopotamus.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-07 17:20:21 +01:00
BASIC_LDFLAGS = -IGNORE:4217 -IGNORE:4049 -NOLOGO -SUBSYSTEM:CONSOLE
MSVC: link in invalidcontinue.obj for better POSIX compatibility By default, Windows abort()'s instead of setting errno=EINVAL when invalid arguments are passed to standard functions. For example, when PAGER quits and git detects it with errno=EPIPE on write(), check_pipe() in write_or_die.c tries raise(SIGPIPE) but since there is no SIGPIPE on Windows, it is treated as invalid argument, causing abort() and crash report window. Linking in invalidcontinue.obj (provided along with MS compiler) allows raise(SIGPIPE) to return with errno=EINVAL. Signed-off-by: Marat Radchenko <marat@slonopotamus.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-28 21:08:02 +01:00
EXTLIBS = user32.lib advapi32.lib shell32.lib wininet.lib ws2_32.lib invalidcontinue.obj
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
PTHREAD_LIBS =
lib =
ifndef DEBUG
MSVC: link dynamically to the CRT Dynamic linking is generally preferred over static linking, and MSVCRT.dll has been integral part of Windows for a long time. This also fixes linker warnings for _malloc and _free in zlib.lib, which seems to be compiled for MSVCRT.dll already. The DLL version also exports some of the CRT initialization functions, which are hidden in the static libcmt.lib (e.g. __wgetmainargs, required by subsequent Unicode patches). Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Stepan Kasal <kasal@ucw.cz> Acked-by: Sebastian Schuberth <sschuberth@gmail.com> Acked-by: Marat Radchenko <marat@slonopotamus.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-07 17:20:21 +01:00
BASIC_CFLAGS += -GL -Os -MD
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
BASIC_LDFLAGS += -LTCG
AR += -LTCG
else
MSVC: link dynamically to the CRT Dynamic linking is generally preferred over static linking, and MSVCRT.dll has been integral part of Windows for a long time. This also fixes linker warnings for _malloc and _free in zlib.lib, which seems to be compiled for MSVCRT.dll already. The DLL version also exports some of the CRT initialization functions, which are hidden in the static libcmt.lib (e.g. __wgetmainargs, required by subsequent Unicode patches). Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Stepan Kasal <kasal@ucw.cz> Acked-by: Sebastian Schuberth <sschuberth@gmail.com> Acked-by: Marat Radchenko <marat@slonopotamus.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-07 17:20:21 +01:00
BASIC_CFLAGS += -Zi -MDd
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
endif
X = .exe
endif
ifeq ($(uname_S),Interix)
NO_INITGROUPS = YesPlease
NO_IPV6 = YesPlease
NO_MEMMEM = YesPlease
NO_MKDTEMP = YesPlease
NO_STRTOUMAX = YesPlease
NO_NSEC = YesPlease
NO_MKSTEMPS = YesPlease
ifeq ($(uname_R),3.5)
NO_INET_NTOP = YesPlease
NO_INET_PTON = YesPlease
NO_SOCKADDR_STORAGE = YesPlease
endif
ifeq ($(uname_R),5.2)
NO_INET_NTOP = YesPlease
NO_INET_PTON = YesPlease
NO_SOCKADDR_STORAGE = YesPlease
endif
endif
ifeq ($(uname_S),Minix)
NO_IPV6 = YesPlease
NO_ST_BLOCKS_IN_STRUCT_STAT = YesPlease
NO_NSEC = YesPlease
NEEDS_LIBGEN =
NEEDS_CRYPTO_WITH_SSL = YesPlease
NEEDS_IDN_WITH_CURL = YesPlease
NEEDS_SSL_WITH_CURL = YesPlease
NEEDS_RESOLV =
NO_HSTRERROR = YesPlease
NO_MMAP = YesPlease
NO_CURL =
NO_EXPAT =
endif
ifeq ($(uname_S),NONSTOP_KERNEL)
# Needs some C99 features, "inline" is just one of them.
# INLINE='' would just replace one set of warnings with another and
# still not compile in c89 mode, due to non-const array initializations.
CC = cc -c99
# Disable all optimization, seems to result in bad code, with -O or -O2
# or even -O1 (default), /usr/local/libexec/git-core/git-pack-objects
# abends on "git push". Needs more investigation.
CFLAGS = -g -O0
# We'd want it to be here.
prefix = /usr/local
# Our's are in ${prefix}/bin (perl might also be in /usr/bin/perl).
PERL_PATH = ${prefix}/bin/perl
PYTHON_PATH = ${prefix}/bin/python
# As detected by './configure'.
# Missdetected, hence commented out, see below.
#NO_CURL = YesPlease
# Added manually, see above.
NEEDS_SSL_WITH_CURL = YesPlease
HAVE_LIBCHARSET_H = YesPlease
HAVE_STRINGS_H = YesPlease
NEEDS_LIBICONV = YesPlease
NEEDS_LIBINTL_BEFORE_LIBICONV = YesPlease
NO_SYS_SELECT_H = UnfortunatelyYes
NO_D_TYPE_IN_DIRENT = YesPlease
NO_HSTRERROR = YesPlease
NO_STRCASESTR = YesPlease
NO_MEMMEM = YesPlease
NO_STRLCPY = YesPlease
NO_SETENV = YesPlease
NO_UNSETENV = YesPlease
NO_MKDTEMP = YesPlease
NO_MKSTEMPS = YesPlease
# Currently libiconv-1.9.1.
OLD_ICONV = UnfortunatelyYes
NO_REGEX = YesPlease
NO_PTHREADS = UnfortunatelyYes
# Not detected (nor checked for) by './configure'.
# We don't have SA_RESTART on NonStop, unfortunalety.
COMPAT_CFLAGS += -DSA_RESTART=0
# Apparently needed in compat/fnmatch/fnmatch.c.
COMPAT_CFLAGS += -DHAVE_STRING_H=1
NO_ST_BLOCKS_IN_STRUCT_STAT = YesPlease
NO_NSEC = YesPlease
NO_PREAD = YesPlease
NO_MMAP = YesPlease
NO_POLL = YesPlease
NO_INTPTR_T = UnfortunatelyYes
# Bug report 10-120822-4477 submitted to HP NonStop development.
MKDIR_WO_TRAILING_SLASH = YesPlease
# RFE 10-120912-4693 submitted to HP NonStop development.
NO_SETITIMER = UnfortunatelyYes
SANE_TOOL_PATH = /usr/coreutils/bin:/usr/local/bin
SHELL_PATH = /usr/local/bin/bash
# as of H06.25/J06.14, we might better use this
#SHELL_PATH = /usr/coreutils/bin/bash
endif
ifneq (,$(findstring MINGW,$(uname_S)))
pathsep = ;
mingw: activate alloca Both MSVC and MINGW have alloca(3) definitions in malloc.h, so by moving win32-compat alloca.h from compat/vcbuild/include/ to compat/win32/ , which is included by both MSVC and MINGW CFLAGS, we can make alloca() work on both those Windows environments. In MINGW, malloc.h has explicit check for GNUC and if it is so, defines alloca to __builtin_alloca, so it looks like we don't need to add any code to here-shipped alloca.h to get optimum performance. Compile-tested on Windows in MSysGit. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Acked-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-09 14:48:27 +02:00
HAVE_ALLOCA_H = YesPlease
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
NO_PREAD = YesPlease
NEEDS_CRYPTO_WITH_SSL = YesPlease
NO_LIBGEN_H = YesPlease
NO_POLL = YesPlease
NO_SYMLINK_HEAD = YesPlease
NO_UNIX_SOCKETS = YesPlease
NO_SETENV = YesPlease
NO_STRCASESTR = YesPlease
NO_STRLCPY = YesPlease
NO_MEMMEM = YesPlease
NEEDS_LIBICONV = YesPlease
NO_STRTOUMAX = YesPlease
NO_MKDTEMP = YesPlease
NO_MKSTEMPS = YesPlease
NO_SVN_TESTS = YesPlease
NO_PERL_MAKEMAKER = YesPlease
RUNTIME_PREFIX = YesPlease
NO_ST_BLOCKS_IN_STRUCT_STAT = YesPlease
NO_NSEC = YesPlease
USE_WIN32_MMAP = YesPlease
USE_NED_ALLOCATOR = YesPlease
UNRELIABLE_FSTAT = UnfortunatelyYes
OBJECT_CREATION_USES_RENAMES = UnfortunatelyNeedsTo
NO_REGEX = YesPlease
NO_PYTHON = YesPlease
BLK_SHA1 = YesPlease
ETAGS_TARGET = ETAGS
NO_INET_PTON = YesPlease
NO_INET_NTOP = YesPlease
NO_POSIX_GOODIES = UnfortunatelyYes
Set the default help format to html for msys builds. This resolves issue #19 by setting the compiled default to html in msys builds following the changes introduced by commit 1cc8af0 "help: use HTML as the default help format on Windows" Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
2012-06-21 13:24:14 +02:00
DEFAULT_HELP_FORMAT = html
Win32 dirent: remove unused dirent.d_ino member There are no proper inodes on Windows, so remove dirent.d_ino and #define NO_D_INO_IN_DIRENT in the Makefile (this skips e.g. an ineffective qsort in fsck.c). Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Stepan Kasal <kasal@ucw.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-07 17:34:33 +01:00
NO_D_INO_IN_DIRENT = YesPlease
MinGW: Fix stat definitions to work with MinGW runtime version 4.0 For an overview of changes in mingwrt-4.0 see: http://sourceforge.net/p/mingw/mingw-org-wsl/ci/4.0.0/tree/NEWS Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-11 18:02:09 +02:00
COMPAT_CFLAGS += -D__USE_MINGW_ACCESS -D_USE_32BIT_TIME_T -DNOGDI -Icompat -Icompat/win32
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
COMPAT_CFLAGS += -DSTRIP_EXTENSION=\".exe\"
COMPAT_OBJS += compat/mingw.o compat/winansi.o \
compat/win32/pthread.o compat/win32/syslog.o \
compat/win32/dirent.o
msysgit: Add the --large-address-aware linker directive to the makefile. This has the effect of increasing the address space from 2GB to 4GB under 64-bit Windows, reducing the likelihood of an "out of memory" error when e.g. repacking a large repository. The test suite passes with this patch, with and without the MEM_TOP_DOWN flag added to all VirtualAlloc calls. While this is no guarantee that there are no issues with large memory support (it could break Git on other setups than mine, for example), it at least increases the chance that nothing obvious goes wrong (such as errors introduced by faulty sign extension, say, with ssize_t). [PT: Resolves github issue #12] Signed-off-by: Pierre le Riche <github@pleasedontspam.me> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
2012-05-28 09:46:54 +02:00
BASIC_LDFLAGS += -Wl,--large-address-aware
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
EXTLIBS += -lws2_32
Provide a Windows version resource for the git executables. Embeds the git version and description into the git executable thus implementing the request in issue #5. Acked-by: Heiko Voigt <hvoigt@hvoigt.net> Acked-by: Sebastian Schuberth <sschuberth@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
2012-05-24 01:56:24 +02:00
GITLIBS += git.res
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
PTHREAD_LIBS =
Provide a Windows version resource for the git executables. Embeds the git version and description into the git executable thus implementing the request in issue #5. Acked-by: Heiko Voigt <hvoigt@hvoigt.net> Acked-by: Sebastian Schuberth <sschuberth@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
2012-05-24 01:56:24 +02:00
RC = windres -O coff
convert: The native line-ending is \r\n on MinGW If you try this: 1. Install Git for Windows (from the msysgit project) 2. Put [core] autocrlf = false eol = native in your .gitconfig. 3. Clone a project with *.txt text in its .gitattributes. Then with current git, any text files checked out have LF line endings, instead of the expected CRLF. Cc: Johannes Schindelin <johannes.schindelin@gmx.de> Cc: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-04 10:25:09 +02:00
NATIVE_CRLF = YesPlease
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
X = .exe
SPARSE_FLAGS = -Wno-one-bit-signed-bitfield
ifneq (,$(wildcard ../THIS_IS_MSYSGIT))
htmldir = doc/git/html/
prefix =
INSTALL = /bin/install
EXTLIBS += /mingw/lib/libz.a
NO_R_TO_GCC_LINKER = YesPlease
INTERNAL_QSORT = YesPlease
HAVE_LIBCHARSET_H = YesPlease
Define NO_GETTEXT for Git for Windows The dreaded "your vnsprintf is broken (returned -1)" error is back. At least with the libintl version we have. So for the moment, just work around the issue by _not_ using gettext. Ah, I wish that my attempt at implementing a custom strbuf_vaddf() would not have been brushed aside so rashly. Oh well. Time saved on maintaining that thing, I guess (although more time went into working around coping with existing implementations). Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
2012-01-05 23:41:41 +01:00
NO_GETTEXT = YesPlease
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
else
NO_CURL = YesPlease
endif
endif
ifeq ($(uname_S),QNX)
COMPAT_CFLAGS += -DSA_RESTART=0
Allow building with xmlparse.h expat 1.1 and 1.2 provide xmlparse.h instead of expat.h. Include the former on systems that define the EXPAT_NEEDS_XMLPARSE_H variable and define that variable on QNX systems, which ship with expat 1.1. Signed-off-by: Matt Kraai <matt.kraai@amo.abbott.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-11 23:03:45 +01:00
EXPAT_NEEDS_XMLPARSE_H = YesPlease
Makefile: hoist uname autodetection to config.mak.uname Our Makefile first sets up some sane per-platform defaults by looking at "uname", then modifies that according to the results of autoconf (if any), then modifies that according to the user's wishes in config.mak. For sub-Makefiles like Documentation/Makefile, the latter two are available, but the uname defaults are available only to the main Makefile. This hasn't been a problem so far, because the sub-Makefiles do not rely on any of those automatic settings to do their work. This patch puts the uname magic into its own file so it can be reused in other Makefiles, opening up the possibility of new knobs. Note that we leave one reference to uname in the top-level Makefile: if we are on Darwin, we must check the NO_FINK and NO_DARWIN_PORTS settings. But because we are combining uname settings with user-options, we must do so after all of the config is loaded. This is acceptable, as the resulting conditionals are about setting variables specific to the top-level Makefile (and if that ever changes, we can hoist them into a separate post-config include, too). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03 22:05:41 +01:00
HAVE_STRINGS_H = YesPlease
NEEDS_SOCKET = YesPlease
NO_GETPAGESIZE = YesPlease
NO_ICONV = YesPlease
NO_MEMMEM = YesPlease
NO_MKDTEMP = YesPlease
NO_MKSTEMPS = YesPlease
NO_NSEC = YesPlease
NO_PTHREADS = YesPlease
NO_R_TO_GCC_LINKER = YesPlease
NO_STRCASESTR = YesPlease
NO_STRLCPY = YesPlease
endif
Reference in New Issue Copy Permalink