git-commit-vandalism/refs.h

802 lines
30 KiB
C
Raw Normal View History

#ifndef REFS_H
#define REFS_H
struct object_id;
struct ref_store;
struct repository;
struct strbuf;
struct string_list;
struct string_list_item;
struct worktree;
/*
* Resolve a reference, recursively following symbolic refererences.
*
* Return the name of the non-symbolic reference that ultimately pointed
* at the resolved object name. The return value, if not NULL, is a
* pointer into either a static buffer or the input ref.
*
* If oid is non-NULL, store the referred-to object's name in it.
*
* If the reference cannot be resolved to an object, the behavior
* depends on the RESOLVE_REF_READING flag:
*
* - If RESOLVE_REF_READING is set, return NULL.
*
* - If RESOLVE_REF_READING is not set, clear oid and return the name of
* the last reference name in the chain, which will either be a non-symbolic
* reference or an undefined reference. If this is a prelude to
* "writing" to the ref, the return value is the name of the ref
* that will actually be created or changed.
*
* If the RESOLVE_REF_NO_RECURSE flag is passed, only resolves one
* level of symbolic reference. The value stored in oid for a symbolic
* reference will always be null_oid in this case, and the return
* value is the reference that the symref refers to directly.
*
* If flags is non-NULL, set the value that it points to the
* combination of REF_ISPACKED (if the reference was found among the
* packed references), REF_ISSYMREF (if the initial reference was a
* symbolic reference), REF_BAD_NAME (if the reference name is ill
* formed --- see RESOLVE_REF_ALLOW_BAD_NAME below), and REF_ISBROKEN
* (if the ref is malformed or has a bad name). See refs.h for more detail
* on each flag.
*
* If ref is not a properly-formatted, normalized reference, return
* NULL. If more than MAXDEPTH recursive symbolic lookups are needed,
* give up and return NULL.
*
* RESOLVE_REF_ALLOW_BAD_NAME allows resolving refs even when their
* name is invalid according to git-check-ref-format(1). If the name
* is bad then the value stored in oid will be null_oid and the two
* flags REF_ISBROKEN and REF_BAD_NAME will be set.
*
* Even with RESOLVE_REF_ALLOW_BAD_NAME, names that escape the refs/
* directory and do not consist of all caps and underscores cannot be
* resolved. The function returns NULL for such ref names.
* Caps and underscores refers to the special refs, such as HEAD,
* FETCH_HEAD and friends, that all live outside of the refs/ directory.
*/
#define RESOLVE_REF_READING 0x01
#define RESOLVE_REF_NO_RECURSE 0x02
#define RESOLVE_REF_ALLOW_BAD_NAME 0x04
const char *refs_resolve_ref_unsafe(struct ref_store *refs,
const char *refname,
int resolve_flags,
struct object_id *oid,
int *flags);
const char *resolve_ref_unsafe(const char *refname, int resolve_flags,
struct object_id *oid, int *flags);
char *refs_resolve_refdup(struct ref_store *refs,
const char *refname, int resolve_flags,
struct object_id *oid, int *flags);
char *resolve_refdup(const char *refname, int resolve_flags,
struct object_id *oid, int *flags);
int refs_read_ref_full(struct ref_store *refs, const char *refname,
int resolve_flags, struct object_id *oid, int *flags);
int read_ref_full(const char *refname, int resolve_flags,
struct object_id *oid, int *flags);
int read_ref(const char *refname, struct object_id *oid);
/*
* Return 0 if a reference named refname could be created without
* conflicting with the name of an existing reference. Otherwise,
* return a negative value and write an explanation to err. If extras
* is non-NULL, it is a list of additional refnames with which refname
* is not allowed to conflict. If skip is non-NULL, ignore potential
* conflicts with refs in skip (e.g., because they are scheduled for
* deletion in the same operation). Behavior is undefined if the same
* name is listed in both extras and skip.
*
* Two reference names conflict if one of them exactly matches the
* leading components of the other; e.g., "foo/bar" conflicts with
* both "foo" and with "foo/bar/baz" but not with "foo/bar" or
* "foo/barbados".
*
* extras and skip must be sorted.
*/
int refs_verify_refname_available(struct ref_store *refs,
const char *refname,
const struct string_list *extras,
const struct string_list *skip,
struct strbuf *err);
int ref_exists(const char *refname);
int should_autocreate_reflog(const char *refname);
int is_branch(const char *refname);
int refs_init_db(struct strbuf *err);
/*
* If refname is a non-symbolic reference that refers to a tag object,
* and the tag can be (recursively) dereferenced to a non-tag object,
* store the object ID of the referred-to object to oid and return 0.
* If any of these conditions are not met, return a non-zero value.
* Symbolic references are considered unpeelable, even if they
* ultimately resolve to a peelable tag.
*/
int refs_peel_ref(struct ref_store *refs, const char *refname,
struct object_id *oid);
int peel_ref(const char *refname, struct object_id *oid);
/**
* Resolve refname in the nested "gitlink" repository in the specified
* submodule (which must be non-NULL). If the resolution is
* successful, return 0 and set oid to the name of the object;
* otherwise, return a non-zero value.
*/
int resolve_gitlink_ref(const char *submodule, const char *refname,
struct object_id *oid);
/*
* Return true iff abbrev_name is a possible abbreviation for
* full_name according to the rules defined by ref_rev_parse_rules in
* refs.c.
*/
int refname_match(const char *abbrev_name, const char *full_name);
/*
* Given a 'prefix' expand it by the rules in 'ref_rev_parse_rules' and add
* the results to 'prefixes'
*/
struct argv_array;
void expand_ref_prefix(struct argv_array *prefixes, const char *prefix);
int expand_ref(struct repository *r, const char *str, int len, struct object_id *oid, char **ref);
int repo_dwim_ref(struct repository *r, const char *str, int len, struct object_id *oid, char **ref);
int repo_dwim_log(struct repository *r, const char *str, int len, struct object_id *oid, char **ref);
int dwim_ref(const char *str, int len, struct object_id *oid, char **ref);
int dwim_log(const char *str, int len, struct object_id *oid, char **ref);
/*
* A ref_transaction represents a collection of reference updates that
* should succeed or fail together.
*
* Calling sequence
* ----------------
*
* - Allocate and initialize a `struct ref_transaction` by calling
* `ref_transaction_begin()`.
*
* - Specify the intended ref updates by calling one or more of the
* following functions:
* - `ref_transaction_update()`
* - `ref_transaction_create()`
* - `ref_transaction_delete()`
* - `ref_transaction_verify()`
*
* - Then either:
*
* - Optionally call `ref_transaction_prepare()` to prepare the
* transaction. This locks all references, checks preconditions,
* etc. but doesn't finalize anything. If this step fails, the
* transaction has been closed and can only be freed. If this step
* succeeds, then `ref_transaction_commit()` is almost certain to
* succeed. However, you can still call `ref_transaction_abort()`
* if you decide not to commit the transaction after all.
*
* - Call `ref_transaction_commit()` to execute the transaction,
* make the changes permanent, and release all locks. If you
* haven't already called `ref_transaction_prepare()`, then
* `ref_transaction_commit()` calls it for you.
*
* Or
*
* - Call `initial_ref_transaction_commit()` if the ref database is
* known to be empty and have no other writers (e.g. during
* clone). This is likely to be much faster than
* `ref_transaction_commit()`. `ref_transaction_prepare()` should
* *not* be called before `initial_ref_transaction_commit()`.
*
* - Then finally, call `ref_transaction_free()` to free the
* `ref_transaction` data structure.
*
* At any time before calling `ref_transaction_commit()`, you can call
* `ref_transaction_abort()` to abort the transaction, rollback any
* locks, and free any associated resources (including the
* `ref_transaction` data structure).
*
* Putting it all together, a complete reference update looks like
*
* struct ref_transaction *transaction;
* struct strbuf err = STRBUF_INIT;
* int ret = 0;
*
* transaction = ref_store_transaction_begin(refs, &err);
* if (!transaction ||
* ref_transaction_update(...) ||
* ref_transaction_create(...) ||
* ...etc... ||
* ref_transaction_commit(transaction, &err)) {
* error("%s", err.buf);
* ret = -1;
* }
* ref_transaction_free(transaction);
* strbuf_release(&err);
* return ret;
*
* Error handling
* --------------
*
* On error, transaction functions append a message about what
* went wrong to the 'err' argument. The message mentions what
* ref was being updated (if any) when the error occurred so it
* can be passed to 'die' or 'error' as-is.
*
* The message is appended to err without first clearing err.
* err will not be '\n' terminated.
*
* Caveats
* -------
*
* Note that no locks are taken, and no refs are read, until
* `ref_transaction_prepare()` or `ref_transaction_commit()` is
* called. So, for example, `ref_transaction_verify()` won't report a
* verification failure until the commit is attempted.
*/
struct ref_transaction;
/*
refs: introduce an iterator interface Currently, the API for iterating over references is via a family of for_each_ref()-type functions that invoke a callback function for each selected reference. All of these eventually call do_for_each_ref(), which knows how to do one thing: iterate in parallel through two ref_caches, one for loose and one for packed refs, giving loose references precedence over packed refs. This is rather complicated code, and is quite specialized to the files backend. It also requires callers to encapsulate their work into a callback function, which often means that they have to define and use a "cb_data" struct to manage their context. The current design is already bursting at the seams, and will become even more awkward in the upcoming world of multiple reference storage backends: * Per-worktree vs. shared references are currently handled via a kludge in git_path() rather than iterating over each part of the reference namespace separately and merging the results. This kludge will cease to work when we have multiple reference storage backends. * The current scheme is inflexible. What if we sometimes want to bypass the ref_cache, or use it only for packed or only for loose refs? What if we want to store symbolic refs in one type of storage backend and non-symbolic ones in another? In the future, each reference backend will need to define its own way of iterating over references. The crux of the problem with the current design is that it is impossible to compose for_each_ref()-style iterations, because the flow of control is owned by the for_each_ref() function. There is nothing that a caller can do but iterate through all references in a single burst, so there is no way for it to interleave references from multiple backends and present the result to the rest of the world as a single compound backend. This commit introduces a new iteration primitive for references: a ref_iterator. A ref_iterator is a polymorphic object that a reference storage backend can be asked to instantiate. There are three functions that can be applied to a ref_iterator: * ref_iterator_advance(): move to the next reference in the iteration * ref_iterator_abort(): end the iteration before it is exhausted * ref_iterator_peel(): peel the reference currently being looked at Iterating using a ref_iterator leaves the flow of control in the hands of the caller, which means that ref_iterators from multiple sources (e.g., loose and packed refs) can be composed and presented to the world as a single compound ref_iterator. It also means that the backend code for implementing reference iteration will sometimes be more complicated. For example, the cache_ref_iterator (which iterates over a ref_cache) can't use the C stack to recurse; instead, it must manage its own stack internally as explicit data structures. There is also a lot of boilerplate connected with object-oriented programming in C. Eventually, end-user callers will be able to be written in a more natural way—managing their own flow of control rather than having to work via callbacks. Since there will only be a few reference backends but there are many consumers of this API, this is a good tradeoff. More importantly, we gain composability, and especially the possibility of writing interchangeable parts that can work with any ref_iterator. For example, merge_ref_iterator implements a generic way of merging the contents of any two ref_iterators. It is used to merge loose + packed refs as part of the implementation of the files_ref_iterator. But it will also be possible to use it to merge other pairs of reference sources (e.g., per-worktree vs. shared refs). Another example is prefix_ref_iterator, which can be used to trim a prefix off the front of reference names before presenting them to the caller (e.g., "refs/heads/master" -> "master"). In this patch, we introduce the iterator abstraction and many utilities, and implement a reference iterator for the files ref storage backend. (I've written several other obvious utilities, for example a generic way to filter references being iterated over. These will probably be useful in the future. But they are not needed for this patch series, so I am not including them at this time.) In a moment we will rewrite do_for_each_ref() to work via reference iterators (allowing some special-purpose code to be discarded), and do something similar for reflogs. In future patch series, we will expose the ref_iterator abstraction in the public refs API so that callers can use it directly. Implementation note: I tried abstracting this a layer further to allow generic iterators (over arbitrary types of objects) and generic utilities like a generic merge_iterator. But the implementation in C was very cumbersome, involving (in my opinion) too much boilerplate and too much unsafe casting, some of which would have had to be done on the caller side. However, I did put a few iterator-related constants in a top-level header file, iterator.h, as they will be useful in a moment to implement iteration over directory trees and possibly other types of iterators in the future. Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-18 06:15:15 +02:00
* Bit values set in the flags argument passed to each_ref_fn() and
* stored in ref_iterator::flags. Other bits are for internal use
* only:
*/
/* Reference is a symbolic reference. */
#define REF_ISSYMREF 0x01
/* Reference is a packed reference. */
#define REF_ISPACKED 0x02
/*
* Reference cannot be resolved to an object name: dangling symbolic
refs.c: allow listing and deleting badly named refs We currently do not handle badly named refs well: $ cp .git/refs/heads/master .git/refs/heads/master.....@\*@\\. $ git branch fatal: Reference has invalid format: 'refs/heads/master.....@*@\.' $ git branch -D master.....@\*@\\. error: branch 'master.....@*@\.' not found. Users cannot recover from a badly named ref without manually finding and deleting the loose ref file or appropriate line in packed-refs. Making that easier will make it easier to tweak the ref naming rules in the future, for example to forbid shell metacharacters like '`' and '"', without putting people in a state that is hard to get out of. So allow "branch --list" to show these refs and allow "branch -d/-D" and "update-ref -d" to delete them. Other commands (for example to rename refs) will continue to not handle these refs but can be changed in later patches. Details: In resolving functions, refuse to resolve refs that don't pass the git-check-ref-format(1) check unless the new RESOLVE_REF_ALLOW_BAD_NAME flag is passed. Even with RESOLVE_REF_ALLOW_BAD_NAME, refuse to resolve refs that escape the refs/ directory and do not match the pattern [A-Z_]* (think "HEAD" and "MERGE_HEAD"). In locking functions, refuse to act on badly named refs unless they are being deleted and either are in the refs/ directory or match [A-Z_]*. Just like other invalid refs, flag resolved, badly named refs with the REF_ISBROKEN flag, treat them as resolving to null_sha1, and skip them in all iteration functions except for for_each_rawref. Flag badly named refs (but not symrefs pointing to badly named refs) with a REF_BAD_NAME flag to make it easier for future callers to notice and handle them specially. For example, in a later patch for-each-ref will use this flag to detect refs whose names can confuse callers parsing for-each-ref output. In the transaction API, refuse to create or update badly named refs, but allow deleting them (unless they try to escape refs/ and don't match [A-Z_]*). Signed-off-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-03 20:45:43 +02:00
* reference (directly or indirectly), corrupt reference file,
* reference exists but name is bad, or symbolic reference refers to
* ill-formatted reference name.
*/
#define REF_ISBROKEN 0x04
refs.c: allow listing and deleting badly named refs We currently do not handle badly named refs well: $ cp .git/refs/heads/master .git/refs/heads/master.....@\*@\\. $ git branch fatal: Reference has invalid format: 'refs/heads/master.....@*@\.' $ git branch -D master.....@\*@\\. error: branch 'master.....@*@\.' not found. Users cannot recover from a badly named ref without manually finding and deleting the loose ref file or appropriate line in packed-refs. Making that easier will make it easier to tweak the ref naming rules in the future, for example to forbid shell metacharacters like '`' and '"', without putting people in a state that is hard to get out of. So allow "branch --list" to show these refs and allow "branch -d/-D" and "update-ref -d" to delete them. Other commands (for example to rename refs) will continue to not handle these refs but can be changed in later patches. Details: In resolving functions, refuse to resolve refs that don't pass the git-check-ref-format(1) check unless the new RESOLVE_REF_ALLOW_BAD_NAME flag is passed. Even with RESOLVE_REF_ALLOW_BAD_NAME, refuse to resolve refs that escape the refs/ directory and do not match the pattern [A-Z_]* (think "HEAD" and "MERGE_HEAD"). In locking functions, refuse to act on badly named refs unless they are being deleted and either are in the refs/ directory or match [A-Z_]*. Just like other invalid refs, flag resolved, badly named refs with the REF_ISBROKEN flag, treat them as resolving to null_sha1, and skip them in all iteration functions except for for_each_rawref. Flag badly named refs (but not symrefs pointing to badly named refs) with a REF_BAD_NAME flag to make it easier for future callers to notice and handle them specially. For example, in a later patch for-each-ref will use this flag to detect refs whose names can confuse callers parsing for-each-ref output. In the transaction API, refuse to create or update badly named refs, but allow deleting them (unless they try to escape refs/ and don't match [A-Z_]*). Signed-off-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-03 20:45:43 +02:00
/*
* Reference name is not well formed.
*
* See git-check-ref-format(1) for the definition of well formed ref names.
*/
#define REF_BAD_NAME 0x08
/*
* The signature for the callback function for the for_each_*()
* functions below. The memory pointed to by the refname and oid
* arguments is only guaranteed to be valid for the duration of a
* single callback invocation.
*/
typedef int each_ref_fn(const char *refname,
const struct object_id *oid, int flags, void *cb_data);
/*
* The same as each_ref_fn, but also with a repository argument that
* contains the repository associated with the callback.
*/
typedef int each_repo_ref_fn(struct repository *r,
const char *refname,
const struct object_id *oid,
int flags,
void *cb_data);
/*
* The following functions invoke the specified callback function for
* each reference indicated. If the function ever returns a nonzero
* value, stop the iteration and return that value. Please note that
* it is not safe to modify references while an iteration is in
* progress, unless the same callback function invocation that
* modifies the reference also returns a nonzero value to immediately
* stop the iteration. Returned references are sorted.
*/
int refs_head_ref(struct ref_store *refs,
each_ref_fn fn, void *cb_data);
int refs_for_each_ref(struct ref_store *refs,
each_ref_fn fn, void *cb_data);
int refs_for_each_ref_in(struct ref_store *refs, const char *prefix,
each_ref_fn fn, void *cb_data);
int refs_for_each_tag_ref(struct ref_store *refs,
each_ref_fn fn, void *cb_data);
int refs_for_each_branch_ref(struct ref_store *refs,
each_ref_fn fn, void *cb_data);
int refs_for_each_remote_ref(struct ref_store *refs,
each_ref_fn fn, void *cb_data);
int head_ref(each_ref_fn fn, void *cb_data);
int for_each_ref(each_ref_fn fn, void *cb_data);
int for_each_ref_in(const char *prefix, each_ref_fn fn, void *cb_data);
int refs_for_each_fullref_in(struct ref_store *refs, const char *prefix,
each_ref_fn fn, void *cb_data,
unsigned int broken);
int for_each_fullref_in(const char *prefix, each_ref_fn fn, void *cb_data,
unsigned int broken);
int for_each_tag_ref(each_ref_fn fn, void *cb_data);
int for_each_branch_ref(each_ref_fn fn, void *cb_data);
int for_each_remote_ref(each_ref_fn fn, void *cb_data);
int for_each_replace_ref(struct repository *r, each_repo_ref_fn fn, void *cb_data);
int for_each_glob_ref(each_ref_fn fn, const char *pattern, void *cb_data);
int for_each_glob_ref_in(each_ref_fn fn, const char *pattern,
const char *prefix, void *cb_data);
int head_ref_namespaced(each_ref_fn fn, void *cb_data);
int for_each_namespaced_ref(each_ref_fn fn, void *cb_data);
ref namespaces: infrastructure Add support for dividing the refs of a single repository into multiple namespaces, each of which can have its own branches, tags, and HEAD. Git can expose each namespace as an independent repository to pull from and push to, while sharing the object store, and exposing all the refs to operations such as git-gc. Storing multiple repositories as namespaces of a single repository avoids storing duplicate copies of the same objects, such as when storing multiple branches of the same source. The alternates mechanism provides similar support for avoiding duplicates, but alternates do not prevent duplication between new objects added to the repositories without ongoing maintenance, while namespaces do. To specify a namespace, set the GIT_NAMESPACE environment variable to the namespace. For each ref namespace, git stores the corresponding refs in a directory under refs/namespaces/. For example, GIT_NAMESPACE=foo will store refs under refs/namespaces/foo/. You can also specify namespaces via the --namespace option to git. Note that namespaces which include a / will expand to a hierarchy of namespaces; for example, GIT_NAMESPACE=foo/bar will store refs under refs/namespaces/foo/refs/namespaces/bar/. This makes paths in GIT_NAMESPACE behave hierarchically, so that cloning with GIT_NAMESPACE=foo/bar produces the same result as cloning with GIT_NAMESPACE=foo and cloning from that repo with GIT_NAMESPACE=bar. It also avoids ambiguity with strange namespace paths such as foo/refs/heads/, which could otherwise generate directory/file conflicts within the refs directory. Add the infrastructure for ref namespaces: handle the GIT_NAMESPACE environment variable and --namespace option, and support iterating over refs in a namespace. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Jamey Sharp <jamey@minilop.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-05 19:54:44 +02:00
/* can be used to learn about broken ref and symref */
int refs_for_each_rawref(struct ref_store *refs, each_ref_fn fn, void *cb_data);
int for_each_rawref(each_ref_fn fn, void *cb_data);
log: add option to choose which refs to decorate When `log --decorate` is used, git will decorate commits with all available refs. While in most cases this may give the desired effect, under some conditions it can lead to excessively verbose output. Introduce two command line options, `--decorate-refs=<pattern>` and `--decorate-refs-exclude=<pattern>` to allow the user to select which refs are used in decoration. When "--decorate-refs=<pattern>" is given, only the refs that match the pattern are used in decoration. The refs that match the pattern when "--decorate-refs-exclude=<pattern>" is given, are never used in decoration. These options follow the same convention for mixing negative and positive patterns across the system, assuming that the inclusive default is to match all refs available. (1) if there is no positive pattern given, pretend as if an inclusive default positive pattern was given; (2) for each candidate, reject it if it matches no positive pattern, or if it matches any one of the negative patterns. The rules for what is considered a match are slightly different from the rules used elsewhere. Commands like `log --glob` assume a trailing '/*' when glob chars are not present in the pattern. This makes it difficult to specify a single ref. On the other hand, commands like `describe --match --all` allow specifying exact refs, but do not have the convenience of allowing "shorthand refs" like 'refs/heads' or 'heads' to refer to 'refs/heads/*'. The commands introduced in this patch consider a match if: (a) the pattern contains globs chars, and regular pattern matching returns a match. (b) the pattern does not contain glob chars, and ref '<pattern>' exists, or if ref exists under '<pattern>/' This allows both behaviours (allowing single refs and shorthand refs) yet remaining compatible with existent commands. Helped-by: Kevin Daudt <me@ikke.info> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-21 22:33:41 +01:00
/*
* Normalizes partial refs to their fully qualified form.
* Will prepend <prefix> to the <pattern> if it doesn't start with 'refs/'.
* <prefix> will default to 'refs/' if NULL.
*
* item.string will be set to the result.
* item.util will be set to NULL if <pattern> contains glob characters, or
* non-NULL if it doesn't.
*/
void normalize_glob_ref(struct string_list_item *item, const char *prefix,
const char *pattern);
/*
* Returns 0 if refname matches any of the exclude_patterns, or if it doesn't
* match any of the include_patterns. Returns 1 otherwise.
*
* If pattern list is NULL or empty, matching against that list is skipped.
* This has the effect of matching everything by default, unless the user
* specifies rules otherwise.
*/
int ref_filter_match(const char *refname,
const struct string_list *include_patterns,
const struct string_list *exclude_patterns);
static inline const char *has_glob_specials(const char *pattern)
{
return strpbrk(pattern, "?*[");
}
void warn_dangling_symref(FILE *fp, const char *msg_fmt, const char *refname);
void warn_dangling_symrefs(FILE *fp, const char *msg_fmt,
const struct string_list *refnames);
/*
* Flags for controlling behaviour of pack_refs()
* PACK_REFS_PRUNE: Prune loose refs after packing
* PACK_REFS_ALL: Pack _all_ refs, not just tags and already packed refs
*/
#define PACK_REFS_PRUNE 0x0001
#define PACK_REFS_ALL 0x0002
/*
* Write a packed-refs file for the current repository.
* flags: Combination of the above PACK_REFS_* flags.
*/
int refs_pack_refs(struct ref_store *refs, unsigned int flags);
/*
* Setup reflog before using. Fill in err and return -1 on failure.
*/
int refs_create_reflog(struct ref_store *refs, const char *refname,
int force_create, struct strbuf *err);
int safe_create_reflog(const char *refname, int force_create, struct strbuf *err);
/** Reads log for the value of ref during at_time. **/
int read_ref_at(struct ref_store *refs,
const char *refname, unsigned int flags,
timestamp_t at_time, int cnt,
struct object_id *oid, char **msg,
timestamp_t *cutoff_time, int *cutoff_tz, int *cutoff_cnt);
/** Check if a particular reflog exists */
int refs_reflog_exists(struct ref_store *refs, const char *refname);
int reflog_exists(const char *refname);
/*
* Delete the specified reference. If old_oid is non-NULL, then
* verify that the current value of the reference is old_oid before
* deleting it. If old_oid is NULL, delete the reference if it
* exists, regardless of its old value. It is an error for old_oid to
* be null_oid. msg and flags are passed through to
* ref_transaction_delete().
*/
int refs_delete_ref(struct ref_store *refs, const char *msg,
const char *refname,
const struct object_id *old_oid,
unsigned int flags);
int delete_ref(const char *msg, const char *refname,
const struct object_id *old_oid, unsigned int flags);
/*
* Delete the specified references. If there are any problems, emit
* errors but attempt to keep going (i.e., the deletes are not done in
* an all-or-nothing transaction). msg and flags are passed through to
* ref_transaction_delete().
*/
int refs_delete_refs(struct ref_store *refs, const char *msg,
struct string_list *refnames, unsigned int flags);
int delete_refs(const char *msg, struct string_list *refnames,
unsigned int flags);
/** Delete a reflog */
int refs_delete_reflog(struct ref_store *refs, const char *refname);
int delete_reflog(const char *refname);
/* iterate over reflog entries */
typedef int each_reflog_ent_fn(
struct object_id *old_oid, struct object_id *new_oid,
const char *committer, timestamp_t timestamp,
int tz, const char *msg, void *cb_data);
int refs_for_each_reflog_ent(struct ref_store *refs, const char *refname,
each_reflog_ent_fn fn, void *cb_data);
int refs_for_each_reflog_ent_reverse(struct ref_store *refs,
const char *refname,
each_reflog_ent_fn fn,
void *cb_data);
int for_each_reflog_ent(const char *refname, each_reflog_ent_fn fn, void *cb_data);
int for_each_reflog_ent_reverse(const char *refname, each_reflog_ent_fn fn, void *cb_data);
/*
* Calls the specified function for each reflog file until it returns nonzero,
* and returns the value. Reflog file order is unspecified.
*/
int refs_for_each_reflog(struct ref_store *refs, each_ref_fn fn, void *cb_data);
int for_each_reflog(each_ref_fn fn, void *cb_data);
#define REFNAME_ALLOW_ONELEVEL 1
#define REFNAME_REFSPEC_PATTERN 2
/*
* Return 0 iff refname has the correct format for a refname according
* to the rules described in Documentation/git-check-ref-format.txt.
* If REFNAME_ALLOW_ONELEVEL is set in flags, then accept one-level
* reference names. If REFNAME_REFSPEC_PATTERN is set in flags, then
* allow a single "*" wildcard character in the refspec. No leading or
* repeated slashes are accepted.
*/
int check_refname_format(const char *refname, int flags);
const char *prettify_refname(const char *refname);
char *refs_shorten_unambiguous_ref(struct ref_store *refs,
const char *refname, int strict);
char *shorten_unambiguous_ref(const char *refname, int strict);
/** rename ref, return 0 on success **/
int refs_rename_ref(struct ref_store *refs, const char *oldref,
const char *newref, const char *logmsg);
branch: add a --copy (-c) option to go with --move (-m) Add the ability to --copy a branch and its reflog and configuration, this uses the same underlying machinery as the --move (-m) option except the reflog and configuration is copied instead of being moved. This is useful for e.g. copying a topic branch to a new version, e.g. work to work-2 after submitting the work topic to the list, while preserving all the tracking info and other configuration that goes with the branch, and unlike --move keeping the other already-submitted branch around for reference. Like --move, when the source branch is the currently checked out branch the HEAD is moved to the destination branch. In the case of --move we don't really have a choice (other than remaining on a detached HEAD) and in order to keep the functionality consistent, we are doing it in similar way for --copy too. The most common usage of this feature is expected to be moving to a new topic branch which is a copy of the current one, in that case moving to the target branch is what the user wants, and doesn't unexpectedly behave differently than --move would. One outstanding caveat of this implementation is that: git checkout maint && git checkout master && git branch -c topic && git checkout - Will check out 'maint' instead of 'master'. This is because the @{-N} feature (or its -1 shorthand "-") relies on HEAD reflogs created by the checkout command, so in this case we'll checkout maint instead of master, as the user might expect. What to do about that is left to a future change. Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Sahil Dua <sahildua2305@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-18 23:19:16 +02:00
int rename_ref(const char *oldref, const char *newref,
const char *logmsg);
/** copy ref, return 0 on success **/
int refs_copy_existing_ref(struct ref_store *refs, const char *oldref,
const char *newref, const char *logmsg);
int copy_existing_ref(const char *oldref, const char *newref,
const char *logmsg);
int refs_create_symref(struct ref_store *refs, const char *refname,
const char *target, const char *logmsg);
int create_symref(const char *refname, const char *target, const char *logmsg);
enum action_on_err {
UPDATE_REFS_MSG_ON_ERR,
UPDATE_REFS_DIE_ON_ERR,
UPDATE_REFS_QUIET_ON_ERR
};
/*
* Begin a reference transaction. The reference transaction must
* be freed by calling ref_transaction_free().
*/
struct ref_transaction *ref_store_transaction_begin(struct ref_store *refs,
struct strbuf *err);
struct ref_transaction *ref_transaction_begin(struct strbuf *err);
/*
* Reference transaction updates
*
* The following four functions add a reference check or update to a
* ref_transaction. They have some common similar parameters:
*
* transaction -- a pointer to an open ref_transaction, obtained
* from ref_transaction_begin().
*
* refname -- the name of the reference to be affected.
*
* new_oid -- the object ID that should be set to be the new value
* of the reference. Some functions allow this parameter to be
* NULL, meaning that the reference is not changed, or
* null_oid, meaning that the reference should be deleted. A
* copy of this value is made in the transaction.
*
* old_oid -- the object ID that the reference must have before
* the update. Some functions allow this parameter to be NULL,
* meaning that the old value of the reference is not checked,
* or null_oid, meaning that the reference must not exist
* before the update. A copy of this value is made in the
* transaction.
*
* flags -- flags affecting the update, passed to
* update_ref_lock(). Possible flags: REF_NO_DEREF,
* REF_FORCE_CREATE_REFLOG. See those constants for more
* information.
*
* msg -- a message describing the change (for the reflog).
*
* err -- a strbuf for receiving a description of any error that
* might have occurred.
*
* The functions make internal copies of refname and msg, so the
* caller retains ownership of these parameters.
*
* The functions return 0 on success and non-zero on failure. A
* failure means that the transaction as a whole has failed and needs
* to be rolled back.
*/
/*
* The following flags can be passed to ref_transaction_update() etc.
* Internally, they are stored in `ref_update::flags`, along with some
* internal flags.
*/
/*
* Act on the ref directly; i.e., without dereferencing symbolic refs.
* If this flag is not specified, then symbolic references are
* dereferenced and the update is applied to the referent.
*/
#define REF_NO_DEREF (1 << 0)
/*
* Force the creation of a reflog for this reference, even if it
* didn't previously have a reflog.
*/
#define REF_FORCE_CREATE_REFLOG (1 << 1)
/*
* Bitmask of all of the flags that are allowed to be passed in to
* ref_transaction_update() and friends:
*/
#define REF_TRANSACTION_UPDATE_ALLOWED_FLAGS \
(REF_NO_DEREF | REF_FORCE_CREATE_REFLOG)
/*
* Add a reference update to transaction. `new_oid` is the value that
* the reference should have after the update, or `null_oid` if it
* should be deleted. If `new_oid` is NULL, then the reference is not
* changed at all. `old_oid` is the value that the reference must have
* before the update, or `null_oid` if it must not have existed
* beforehand. The old value is checked after the lock is taken to
* prevent races. If the old value doesn't agree with old_oid, the
* whole transaction fails. If old_oid is NULL, then the previous
* value is not checked.
*
* See the above comment "Reference transaction updates" for more
* information.
*/
int ref_transaction_update(struct ref_transaction *transaction,
const char *refname,
const struct object_id *new_oid,
const struct object_id *old_oid,
unsigned int flags, const char *msg,
struct strbuf *err);
/*
* Add a reference creation to transaction. new_oid is the value that
* the reference should have after the update; it must not be
* null_oid. It is verified that the reference does not exist
* already.
*
* See the above comment "Reference transaction updates" for more
* information.
*/
int ref_transaction_create(struct ref_transaction *transaction,
const char *refname,
const struct object_id *new_oid,
unsigned int flags, const char *msg,
struct strbuf *err);
/*
* Add a reference deletion to transaction. If old_oid is non-NULL,
* then it holds the value that the reference should have had before
* the update (which must not be null_oid).
*
* See the above comment "Reference transaction updates" for more
* information.
*/
int ref_transaction_delete(struct ref_transaction *transaction,
const char *refname,
const struct object_id *old_oid,
unsigned int flags, const char *msg,
struct strbuf *err);
/*
* Verify, within a transaction, that refname has the value old_oid,
* or, if old_oid is null_oid, then verify that the reference
* doesn't exist. old_oid must be non-NULL.
*
* See the above comment "Reference transaction updates" for more
* information.
*/
int ref_transaction_verify(struct ref_transaction *transaction,
const char *refname,
const struct object_id *old_oid,
unsigned int flags,
struct strbuf *err);
/* Naming conflict (for example, the ref names A and A/B conflict). */
#define TRANSACTION_NAME_CONFLICT -1
/* All other errors. */
#define TRANSACTION_GENERIC_ERROR -2
/*
* Perform the preparatory stages of committing `transaction`. Acquire
* any needed locks, check preconditions, etc.; basically, do as much
* as possible to ensure that the transaction will be able to go
* through, stopping just short of making any irrevocable or
* user-visible changes. The updates that this function prepares can
* be finished up by calling `ref_transaction_commit()` or rolled back
* by calling `ref_transaction_abort()`.
*
* On success, return 0 and leave the transaction in "prepared" state.
* On failure, abort the transaction, write an error message to `err`,
* and return one of the `TRANSACTION_*` constants.
*
* Callers who don't need such fine-grained control over committing
* reference transactions should just call `ref_transaction_commit()`.
*/
int ref_transaction_prepare(struct ref_transaction *transaction,
struct strbuf *err);
/*
* Commit all of the changes that have been queued in transaction, as
* atomically as possible. On success, return 0 and leave the
* transaction in "closed" state. On failure, roll back the
* transaction, write an error message to `err`, and return one of the
* `TRANSACTION_*` constants
*/
int ref_transaction_commit(struct ref_transaction *transaction,
struct strbuf *err);
/*
* Abort `transaction`, which has been begun and possibly prepared,
* but not yet committed.
*/
int ref_transaction_abort(struct ref_transaction *transaction,
struct strbuf *err);
/*
* Like ref_transaction_commit(), but optimized for creating
* references when originally initializing a repository (e.g., by "git
* clone"). It writes the new references directly to packed-refs
* without locking the individual references.
*
* It is a bug to call this function when there might be other
* processes accessing the repository or if there are existing
* references that might conflict with the ones being created. All
* old_oid values must either be absent or null_oid.
*/
int initial_ref_transaction_commit(struct ref_transaction *transaction,
struct strbuf *err);
/*
* Free `*transaction` and all associated data.
*/
void ref_transaction_free(struct ref_transaction *transaction);
/**
* Lock, update, and unlock a single reference. This function
* basically does a transaction containing a single call to
* ref_transaction_update(). The parameters to this function have the
* same meaning as the corresponding parameters to
* ref_transaction_update(). Handle errors as requested by the `onerr`
* argument.
*/
int refs_update_ref(struct ref_store *refs, const char *msg, const char *refname,
const struct object_id *new_oid, const struct object_id *old_oid,
unsigned int flags, enum action_on_err onerr);
int update_ref(const char *msg, const char *refname,
const struct object_id *new_oid, const struct object_id *old_oid,
unsigned int flags, enum action_on_err onerr);
int parse_hide_refs_config(const char *var, const char *value, const char *);
/*
* Check whether a ref is hidden. If no namespace is set, both the first and
* the second parameter point to the full ref name. If a namespace is set and
* the ref is inside that namespace, the first parameter is a pointer to the
* name of the ref with the namespace prefix removed. If a namespace is set and
* the ref is outside that namespace, the first parameter is NULL. The second
* parameter always points to the full ref name.
*/
int ref_is_hidden(const char *, const char *);
upload/receive-pack: allow hiding ref hierarchies A repository may have refs that are only used for its internal bookkeeping purposes that should not be exposed to the others that come over the network. Teach upload-pack to omit some refs from its initial advertisement by paying attention to the uploadpack.hiderefs multi-valued configuration variable. Do the same to receive-pack via the receive.hiderefs variable. As a convenient short-hand, allow using transfer.hiderefs to set the value to both of these variables. Any ref that is under the hierarchies listed on the value of these variable is excluded from responses to requests made by "ls-remote", "fetch", etc. (for upload-pack) and "push" (for receive-pack). Because these hidden refs do not count as OUR_REF, an attempt to fetch objects at the tip of them will be rejected, and because these refs do not get advertised, "git push :" will not see local branches that have the same name as them as "matching" ones to be sent. An attempt to update/delete these hidden refs with an explicit refspec, e.g. "git push origin :refs/hidden/22", is rejected. This is not a new restriction. To the pusher, it would appear that there is no such ref, so its push request will conclude with "Now that I sent you all the data, it is time for you to update the refs. I saw that the ref did not exist when I started pushing, and I want the result to point at this commit". The receiving end will apply the compare-and-swap rule to this request and rejects the push with "Well, your update request conflicts with somebody else; I see there is such a ref.", which is the right thing to do. Otherwise a push to a hidden ref will always be "the last one wins", which is not a good default. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-19 01:08:30 +01:00
enum ref_type {
refs: new ref types to make per-worktree refs visible to all worktrees One of the problems with multiple worktree is accessing per-worktree refs of one worktree from another worktree. This was sort of solved by multiple ref store, where the code can open the ref store of another worktree and has access to the ref space of that worktree. The problem with this is reporting. "HEAD" in another ref space is also called "HEAD" like in the current ref space. In order to differentiate them, all the code must somehow carry the ref store around and print something like "HEAD from this ref store". But that is not feasible (or possible with a _lot_ of work). With the current design, we pass a reference around as a string (so called "refname"). Extending this design to pass a string _and_ a ref store is a nightmare, especially when handling extended SHA-1 syntax. So we do it another way. Instead of entering a separate ref space, we make refs from other worktrees available in the current ref space. So "HEAD" is always HEAD of the current worktree, but then we can have "worktrees/blah/HEAD" to denote HEAD from a worktree named "blah". This syntax coincidentally matches the underlying directory structure which makes implementation a bit easier. The main worktree has to be treated specially because well... it's special from the beginning. So HEAD from the main worktree is acccessible via the name "main-worktree/HEAD" instead of "worktrees/main/HEAD" because "main" could be just another secondary worktree. This patch also makes it possible to specify refs from one worktree in another one, e.g. git log worktrees/foo/HEAD Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-21 10:08:54 +02:00
REF_TYPE_PER_WORKTREE, /* refs inside refs/ but not shared */
REF_TYPE_PSEUDOREF, /* refs outside refs/ in current worktree */
REF_TYPE_MAIN_PSEUDOREF, /* pseudo refs from the main worktree */
REF_TYPE_OTHER_PSEUDOREF, /* pseudo refs from other worktrees */
REF_TYPE_NORMAL, /* normal/shared refs inside refs/ */
};
enum ref_type ref_type(const char *refname);
enum expire_reflog_flags {
EXPIRE_REFLOGS_DRY_RUN = 1 << 0,
EXPIRE_REFLOGS_UPDATE_REF = 1 << 1,
EXPIRE_REFLOGS_VERBOSE = 1 << 2,
EXPIRE_REFLOGS_REWRITE = 1 << 3
};
/*
* The following interface is used for reflog expiration. The caller
* calls reflog_expire(), supplying it with three callback functions,
* of the following types. The callback functions define the
* expiration policy that is desired.
*
* reflog_expiry_prepare_fn -- Called once after the reference is
* locked.
*
* reflog_expiry_should_prune_fn -- Called once for each entry in the
* existing reflog. It should return true iff that entry should be
* pruned.
*
* reflog_expiry_cleanup_fn -- Called once before the reference is
* unlocked again.
*/
typedef void reflog_expiry_prepare_fn(const char *refname,
const struct object_id *oid,
void *cb_data);
typedef int reflog_expiry_should_prune_fn(struct object_id *ooid,
struct object_id *noid,
const char *email,
timestamp_t timestamp, int tz,
const char *message, void *cb_data);
typedef void reflog_expiry_cleanup_fn(void *cb_data);
/*
* Expire reflog entries for the specified reference. oid is the old
* value of the reference. flags is a combination of the constants in
* enum expire_reflog_flags. The three function pointers are described
* above. On success, return zero.
*/
int refs_reflog_expire(struct ref_store *refs,
const char *refname,
const struct object_id *oid,
unsigned int flags,
reflog_expiry_prepare_fn prepare_fn,
reflog_expiry_should_prune_fn should_prune_fn,
reflog_expiry_cleanup_fn cleanup_fn,
void *policy_cb_data);
int reflog_expire(const char *refname, const struct object_id *oid,
unsigned int flags,
reflog_expiry_prepare_fn prepare_fn,
reflog_expiry_should_prune_fn should_prune_fn,
reflog_expiry_cleanup_fn cleanup_fn,
void *policy_cb_data);
int ref_storage_backend_exists(const char *name);
struct ref_store *get_main_ref_store(struct repository *r);
/*
* Return the ref_store instance for the specified submodule. For the
* main repository, use submodule==NULL; such a call cannot fail. For
* a submodule, the submodule must exist and be a nonbare repository,
* otherwise return NULL. If the requested reference store has not yet
* been initialized, initialize it first.
*
* For backwards compatibility, submodule=="" is treated the same as
* submodule==NULL.
*/
struct ref_store *get_submodule_ref_store(const char *submodule);
struct ref_store *get_worktree_ref_store(const struct worktree *wt);
#endif /* REFS_H */