Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
/*
|
|
|
|
* LibXDiff by Davide Libenzi ( File Differential Library )
|
|
|
|
* Copyright (C) 2003 Davide Libenzi
|
|
|
|
*
|
|
|
|
* This library is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
|
|
* License as published by the Free Software Foundation; either
|
|
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This library is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
* Lesser General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU Lesser General Public
|
2017-11-07 06:39:33 +01:00
|
|
|
* License along with this library; if not, see
|
|
|
|
* <http://www.gnu.org/licenses/>.
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
*
|
|
|
|
* Davide Libenzi <davidel@xmailserver.org>
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "xinclude.h"
|
|
|
|
|
|
|
|
|
2006-04-04 03:47:55 +02:00
|
|
|
long xdl_bogosqrt(long n) {
|
|
|
|
long i;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Classical integer square root approximation using shifts.
|
|
|
|
*/
|
|
|
|
for (i = 1; n > 0; n >>= 2)
|
|
|
|
i <<= 1;
|
|
|
|
|
|
|
|
return i;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
int xdl_emit_diffrec(char const *rec, long size, char const *pre, long psize,
|
|
|
|
xdemitcb_t *ecb) {
|
2006-06-20 02:01:35 +02:00
|
|
|
int i = 2;
|
2006-03-25 16:56:03 +01:00
|
|
|
mmbuffer_t mb[3];
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
|
|
|
mb[0].ptr = (char *) pre;
|
|
|
|
mb[0].size = psize;
|
|
|
|
mb[1].ptr = (char *) rec;
|
|
|
|
mb[1].size = size;
|
2006-06-20 02:01:35 +02:00
|
|
|
if (size > 0 && rec[size - 1] != '\n') {
|
|
|
|
mb[2].ptr = (char *) "\n\\ No newline at end of file\n";
|
2006-03-25 16:56:03 +01:00
|
|
|
mb[2].size = strlen(mb[2].ptr);
|
2006-06-20 02:01:35 +02:00
|
|
|
i++;
|
2006-03-25 16:56:03 +01:00
|
|
|
}
|
xdiff: provide a separate emit callback for hunks
The xdiff library always emits hunk header lines to our callbacks as
formatted strings like "@@ -a,b +c,d @@\n". This is convenient if we're
going to output a diff, but less so if we actually need to compute using
those numbers, which requires re-parsing the line.
In preparation for moving away from this, let's teach xdiff a new
callback function which gets the broken-out hunk information. To help
callers that don't want to use this new callback, if it's NULL we'll
continue to format the hunk header into a string.
Note that this function renames the "outf" callback to "out_line", as
well. This isn't strictly necessary, but helps in two ways:
1. Now that there are two callbacks, it's nice to use more descriptive
names.
2. Many callers did not zero the emit_callback_data struct, and needed
to be modified to set ecb.out_hunk to NULL. By changing the name of
the existing struct member, that guarantees that any new callers
from in-flight topics will break the build and be examined
manually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-02 07:35:01 +01:00
|
|
|
if (ecb->out_line(ecb->priv, mb, i) < 0) {
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
void *xdl_mmfile_first(mmfile_t *mmf, long *size)
|
|
|
|
{
|
|
|
|
*size = mmf->size;
|
|
|
|
return mmf->ptr;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
long xdl_mmfile_size(mmfile_t *mmf)
|
|
|
|
{
|
|
|
|
return mmf->size;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
int xdl_cha_init(chastore_t *cha, long isize, long icount) {
|
|
|
|
|
|
|
|
cha->head = cha->tail = NULL;
|
|
|
|
cha->isize = isize;
|
|
|
|
cha->nsize = icount * isize;
|
|
|
|
cha->ancur = cha->sncur = NULL;
|
|
|
|
cha->scurr = 0;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void xdl_cha_free(chastore_t *cha) {
|
|
|
|
chanode_t *cur, *tmp;
|
|
|
|
|
|
|
|
for (cur = cha->head; (tmp = cur) != NULL;) {
|
|
|
|
cur = cur->next;
|
|
|
|
xdl_free(tmp);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void *xdl_cha_alloc(chastore_t *cha) {
|
|
|
|
chanode_t *ancur;
|
|
|
|
void *data;
|
|
|
|
|
|
|
|
if (!(ancur = cha->ancur) || ancur->icurr == cha->nsize) {
|
|
|
|
if (!(ancur = (chanode_t *) xdl_malloc(sizeof(chanode_t) + cha->nsize))) {
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
ancur->icurr = 0;
|
|
|
|
ancur->next = NULL;
|
|
|
|
if (cha->tail)
|
|
|
|
cha->tail->next = ancur;
|
|
|
|
if (!cha->head)
|
|
|
|
cha->head = ancur;
|
|
|
|
cha->tail = ancur;
|
|
|
|
cha->ancur = ancur;
|
|
|
|
}
|
|
|
|
|
|
|
|
data = (char *) ancur + sizeof(chanode_t) + ancur->icurr;
|
|
|
|
ancur->icurr += cha->isize;
|
|
|
|
|
|
|
|
return data;
|
|
|
|
}
|
|
|
|
|
2011-07-12 08:10:27 +02:00
|
|
|
long xdl_guess_lines(mmfile_t *mf, long sample) {
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
long nl = 0, size, tsize = 0;
|
|
|
|
char const *data, *cur, *top;
|
|
|
|
|
|
|
|
if ((cur = data = xdl_mmfile_first(mf, &size)) != NULL) {
|
2011-08-01 06:20:07 +02:00
|
|
|
for (top = data + size; nl < sample && cur < top; ) {
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
nl++;
|
|
|
|
if (!(cur = memchr(cur, '\n', top - cur)))
|
|
|
|
cur = top;
|
|
|
|
else
|
|
|
|
cur++;
|
|
|
|
}
|
|
|
|
tsize += (long) (cur - data);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (nl && tsize)
|
|
|
|
nl = xdl_mmfile_size(mf) / (tsize / nl);
|
|
|
|
|
|
|
|
return nl + 1;
|
|
|
|
}
|
|
|
|
|
2013-06-19 20:46:07 +02:00
|
|
|
int xdl_blankline(const char *line, long size, long flags)
|
|
|
|
{
|
|
|
|
long i;
|
|
|
|
|
|
|
|
if (!(flags & XDF_WHITESPACE_FLAGS))
|
|
|
|
return (size <= 1);
|
|
|
|
|
|
|
|
for (i = 0; i < size && XDL_ISSPACE(line[i]); i++)
|
|
|
|
;
|
|
|
|
|
|
|
|
return (i == size);
|
|
|
|
}
|
|
|
|
|
2017-10-26 08:32:27 +02:00
|
|
|
/*
|
|
|
|
* Have we eaten everything on the line, except for an optional
|
|
|
|
* CR at the very end?
|
|
|
|
*/
|
|
|
|
static int ends_with_optional_cr(const char *l, long s, long i)
|
|
|
|
{
|
|
|
|
int complete = s && l[s-1] == '\n';
|
|
|
|
|
|
|
|
if (complete)
|
|
|
|
s--;
|
|
|
|
if (s == i)
|
|
|
|
return 1;
|
|
|
|
/* do not ignore CR at the end of an incomplete line */
|
|
|
|
if (complete && s == i + 1 && l[i] == '\r')
|
|
|
|
return 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2006-06-14 17:40:23 +02:00
|
|
|
int xdl_recmatch(const char *l1, long s1, const char *l2, long s2, long flags)
|
|
|
|
{
|
|
|
|
int i1, i2;
|
|
|
|
|
2010-07-06 05:11:17 +02:00
|
|
|
if (s1 == s2 && !memcmp(l1, l2, s1))
|
|
|
|
return 1;
|
2009-08-23 09:57:18 +02:00
|
|
|
if (!(flags & XDF_WHITESPACE_FLAGS))
|
2010-07-06 05:11:17 +02:00
|
|
|
return 0;
|
2009-08-23 09:57:18 +02:00
|
|
|
|
|
|
|
i1 = 0;
|
|
|
|
i2 = 0;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* -w matches everything that matches with -b, and -b in turn
|
2017-10-26 08:32:27 +02:00
|
|
|
* matches everything that matches with --ignore-space-at-eol,
|
|
|
|
* which in turn matches everything that matches with --ignore-cr-at-eol.
|
2009-08-23 09:57:18 +02:00
|
|
|
*
|
|
|
|
* Each flavor of ignoring needs different logic to skip whitespaces
|
|
|
|
* while we have both sides to compare.
|
|
|
|
*/
|
2006-06-14 17:40:23 +02:00
|
|
|
if (flags & XDF_IGNORE_WHITESPACE) {
|
2009-08-23 09:57:18 +02:00
|
|
|
goto skip_ws;
|
|
|
|
while (i1 < s1 && i2 < s2) {
|
|
|
|
if (l1[i1++] != l2[i2++])
|
2006-10-12 14:22:14 +02:00
|
|
|
return 0;
|
2009-08-23 09:57:18 +02:00
|
|
|
skip_ws:
|
2010-10-04 11:09:17 +02:00
|
|
|
while (i1 < s1 && XDL_ISSPACE(l1[i1]))
|
2009-08-23 09:57:18 +02:00
|
|
|
i1++;
|
2010-10-04 11:09:17 +02:00
|
|
|
while (i2 < s2 && XDL_ISSPACE(l2[i2]))
|
2009-08-23 09:57:18 +02:00
|
|
|
i2++;
|
2006-06-14 17:40:23 +02:00
|
|
|
}
|
|
|
|
} else if (flags & XDF_IGNORE_WHITESPACE_CHANGE) {
|
2009-08-23 09:57:18 +02:00
|
|
|
while (i1 < s1 && i2 < s2) {
|
2010-10-04 11:09:17 +02:00
|
|
|
if (XDL_ISSPACE(l1[i1]) && XDL_ISSPACE(l2[i2])) {
|
2009-08-23 09:57:18 +02:00
|
|
|
/* Skip matching spaces and try again */
|
2010-10-04 11:09:17 +02:00
|
|
|
while (i1 < s1 && XDL_ISSPACE(l1[i1]))
|
2007-02-14 01:30:29 +01:00
|
|
|
i1++;
|
2010-10-04 11:09:17 +02:00
|
|
|
while (i2 < s2 && XDL_ISSPACE(l2[i2]))
|
2007-02-14 01:30:29 +01:00
|
|
|
i2++;
|
2009-08-23 09:57:18 +02:00
|
|
|
continue;
|
2007-02-14 01:30:29 +01:00
|
|
|
}
|
2009-08-23 09:57:18 +02:00
|
|
|
if (l1[i1++] != l2[i2++])
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
} else if (flags & XDF_IGNORE_WHITESPACE_AT_EOL) {
|
2016-07-09 09:23:55 +02:00
|
|
|
while (i1 < s1 && i2 < s2 && l1[i1] == l2[i2]) {
|
|
|
|
i1++;
|
|
|
|
i2++;
|
|
|
|
}
|
2017-10-26 08:32:27 +02:00
|
|
|
} else if (flags & XDF_IGNORE_CR_AT_EOL) {
|
|
|
|
/* Find the first difference and see how the line ends */
|
|
|
|
while (i1 < s1 && i2 < s2 && l1[i1] == l2[i2]) {
|
|
|
|
i1++;
|
|
|
|
i2++;
|
|
|
|
}
|
|
|
|
return (ends_with_optional_cr(l1, s1, i1) &&
|
|
|
|
ends_with_optional_cr(l2, s2, i2));
|
2009-08-23 09:57:18 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* After running out of one side, the remaining side must have
|
|
|
|
* nothing but whitespace for the lines to match. Note that
|
|
|
|
* ignore-whitespace-at-eol case may break out of the loop
|
|
|
|
* while there still are characters remaining on both lines.
|
|
|
|
*/
|
|
|
|
if (i1 < s1) {
|
2010-10-04 11:09:17 +02:00
|
|
|
while (i1 < s1 && XDL_ISSPACE(l1[i1]))
|
2007-02-14 01:30:29 +01:00
|
|
|
i1++;
|
2009-08-23 09:57:18 +02:00
|
|
|
if (s1 != i1)
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
if (i2 < s2) {
|
2010-10-04 11:09:17 +02:00
|
|
|
while (i2 < s2 && XDL_ISSPACE(l2[i2]))
|
2007-02-14 01:30:29 +01:00
|
|
|
i2++;
|
2009-08-23 09:57:18 +02:00
|
|
|
return (s2 == i2);
|
|
|
|
}
|
|
|
|
return 1;
|
2006-06-14 17:40:23 +02:00
|
|
|
}
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
2007-03-20 04:05:10 +01:00
|
|
|
static unsigned long xdl_hash_record_with_whitespace(char const **data,
|
|
|
|
char const *top, long flags) {
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
unsigned long ha = 5381;
|
|
|
|
char const *ptr = *data;
|
2017-10-26 08:32:27 +02:00
|
|
|
int cr_at_eol_only = (flags & XDF_WHITESPACE_FLAGS) == XDF_IGNORE_CR_AT_EOL;
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
|
|
|
for (; ptr < top && *ptr != '\n'; ptr++) {
|
2017-10-26 08:32:27 +02:00
|
|
|
if (cr_at_eol_only) {
|
|
|
|
/* do not ignore CR at the end of an incomplete line */
|
|
|
|
if (*ptr == '\r' &&
|
|
|
|
(ptr + 1 < top && ptr[1] == '\n'))
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
else if (XDL_ISSPACE(*ptr)) {
|
2007-02-14 01:30:29 +01:00
|
|
|
const char *ptr2 = ptr;
|
2009-08-23 09:51:09 +02:00
|
|
|
int at_eol;
|
2010-10-04 11:09:17 +02:00
|
|
|
while (ptr + 1 < top && XDL_ISSPACE(ptr[1])
|
2006-10-12 14:22:14 +02:00
|
|
|
&& ptr[1] != '\n')
|
2006-06-14 17:40:23 +02:00
|
|
|
ptr++;
|
2009-08-23 09:51:09 +02:00
|
|
|
at_eol = (top <= ptr + 1 || ptr[1] == '\n');
|
2009-01-19 19:03:04 +01:00
|
|
|
if (flags & XDF_IGNORE_WHITESPACE)
|
|
|
|
; /* already handled */
|
|
|
|
else if (flags & XDF_IGNORE_WHITESPACE_CHANGE
|
2009-08-23 09:51:09 +02:00
|
|
|
&& !at_eol) {
|
2006-06-14 17:40:23 +02:00
|
|
|
ha += (ha << 5);
|
|
|
|
ha ^= (unsigned long) ' ';
|
|
|
|
}
|
2009-01-19 19:03:04 +01:00
|
|
|
else if (flags & XDF_IGNORE_WHITESPACE_AT_EOL
|
2009-08-23 09:51:09 +02:00
|
|
|
&& !at_eol) {
|
2007-02-14 01:30:29 +01:00
|
|
|
while (ptr2 != ptr + 1) {
|
|
|
|
ha += (ha << 5);
|
|
|
|
ha ^= (unsigned long) *ptr2;
|
|
|
|
ptr2++;
|
|
|
|
}
|
|
|
|
}
|
2006-06-14 17:40:23 +02:00
|
|
|
continue;
|
|
|
|
}
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
ha += (ha << 5);
|
|
|
|
ha ^= (unsigned long) *ptr;
|
|
|
|
}
|
|
|
|
*data = ptr < top ? ptr + 1: ptr;
|
|
|
|
|
|
|
|
return ha;
|
|
|
|
}
|
|
|
|
|
2007-03-20 04:05:10 +01:00
|
|
|
unsigned long xdl_hash_record(char const **data, char const *top, long flags) {
|
|
|
|
unsigned long ha = 5381;
|
|
|
|
char const *ptr = *data;
|
|
|
|
|
|
|
|
if (flags & XDF_WHITESPACE_FLAGS)
|
|
|
|
return xdl_hash_record_with_whitespace(data, top, flags);
|
|
|
|
|
|
|
|
for (; ptr < top && *ptr != '\n'; ptr++) {
|
|
|
|
ha += (ha << 5);
|
|
|
|
ha ^= (unsigned long) *ptr;
|
|
|
|
}
|
|
|
|
*data = ptr < top ? ptr + 1: ptr;
|
|
|
|
|
|
|
|
return ha;
|
|
|
|
}
|
|
|
|
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
unsigned int xdl_hashbits(unsigned int size) {
|
|
|
|
unsigned int val = 1, bits = 0;
|
|
|
|
|
|
|
|
for (; val < size && bits < CHAR_BIT * sizeof(unsigned int); val <<= 1, bits++);
|
|
|
|
return bits ? bits: 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
int xdl_num_out(char *out, long val) {
|
|
|
|
char *ptr, *str = out;
|
|
|
|
char buf[32];
|
|
|
|
|
|
|
|
ptr = buf + sizeof(buf) - 1;
|
|
|
|
*ptr = '\0';
|
|
|
|
if (val < 0) {
|
|
|
|
*--ptr = '-';
|
|
|
|
val = -val;
|
|
|
|
}
|
|
|
|
for (; val && ptr > buf; val /= 10)
|
|
|
|
*--ptr = "0123456789"[val % 10];
|
|
|
|
if (*ptr)
|
|
|
|
for (; *ptr; ptr++, str++)
|
|
|
|
*str = *ptr;
|
|
|
|
else
|
|
|
|
*str++ = '0';
|
|
|
|
*str = '\0';
|
|
|
|
|
|
|
|
return str - out;
|
|
|
|
}
|
|
|
|
|
xdiff: provide a separate emit callback for hunks
The xdiff library always emits hunk header lines to our callbacks as
formatted strings like "@@ -a,b +c,d @@\n". This is convenient if we're
going to output a diff, but less so if we actually need to compute using
those numbers, which requires re-parsing the line.
In preparation for moving away from this, let's teach xdiff a new
callback function which gets the broken-out hunk information. To help
callers that don't want to use this new callback, if it's NULL we'll
continue to format the hunk header into a string.
Note that this function renames the "outf" callback to "out_line", as
well. This isn't strictly necessary, but helps in two ways:
1. Now that there are two callbacks, it's nice to use more descriptive
names.
2. Many callers did not zero the emit_callback_data struct, and needed
to be modified to set ecb.out_hunk to NULL. By changing the name of
the existing struct member, that guarantees that any new callers
from in-flight topics will break the build and be examined
manually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-02 07:35:01 +01:00
|
|
|
static int xdl_format_hunk_hdr(long s1, long c1, long s2, long c2,
|
|
|
|
const char *func, long funclen,
|
|
|
|
xdemitcb_t *ecb) {
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
int nb = 0;
|
|
|
|
mmbuffer_t mb;
|
|
|
|
char buf[128];
|
|
|
|
|
|
|
|
memcpy(buf, "@@ -", 4);
|
|
|
|
nb += 4;
|
|
|
|
|
2006-04-04 03:47:55 +02:00
|
|
|
nb += xdl_num_out(buf + nb, c1 ? s1: s1 - 1);
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
2006-03-25 21:16:17 +01:00
|
|
|
if (c1 != 1) {
|
|
|
|
memcpy(buf + nb, ",", 1);
|
|
|
|
nb += 1;
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
2006-03-25 21:16:17 +01:00
|
|
|
nb += xdl_num_out(buf + nb, c1);
|
|
|
|
}
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
|
|
|
memcpy(buf + nb, " +", 2);
|
|
|
|
nb += 2;
|
|
|
|
|
2006-04-04 03:47:55 +02:00
|
|
|
nb += xdl_num_out(buf + nb, c2 ? s2: s2 - 1);
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
2006-03-25 21:16:17 +01:00
|
|
|
if (c2 != 1) {
|
|
|
|
memcpy(buf + nb, ",", 1);
|
|
|
|
nb += 1;
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
2006-03-25 21:16:17 +01:00
|
|
|
nb += xdl_num_out(buf + nb, c2);
|
|
|
|
}
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
2006-03-28 04:23:31 +02:00
|
|
|
memcpy(buf + nb, " @@", 3);
|
|
|
|
nb += 3;
|
|
|
|
if (func && funclen) {
|
|
|
|
buf[nb++] = ' ';
|
|
|
|
if (funclen > sizeof(buf) - nb - 1)
|
|
|
|
funclen = sizeof(buf) - nb - 1;
|
|
|
|
memcpy(buf + nb, func, funclen);
|
|
|
|
nb += funclen;
|
|
|
|
}
|
|
|
|
buf[nb++] = '\n';
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
|
|
|
mb.ptr = buf;
|
|
|
|
mb.size = nb;
|
xdiff: provide a separate emit callback for hunks
The xdiff library always emits hunk header lines to our callbacks as
formatted strings like "@@ -a,b +c,d @@\n". This is convenient if we're
going to output a diff, but less so if we actually need to compute using
those numbers, which requires re-parsing the line.
In preparation for moving away from this, let's teach xdiff a new
callback function which gets the broken-out hunk information. To help
callers that don't want to use this new callback, if it's NULL we'll
continue to format the hunk header into a string.
Note that this function renames the "outf" callback to "out_line", as
well. This isn't strictly necessary, but helps in two ways:
1. Now that there are two callbacks, it's nice to use more descriptive
names.
2. Many callers did not zero the emit_callback_data struct, and needed
to be modified to set ecb.out_hunk to NULL. By changing the name of
the existing struct member, that guarantees that any new callers
from in-flight topics will break the build and be examined
manually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-02 07:35:01 +01:00
|
|
|
if (ecb->out_line(ecb->priv, &mb, 1) < 0)
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
return -1;
|
xdiff: provide a separate emit callback for hunks
The xdiff library always emits hunk header lines to our callbacks as
formatted strings like "@@ -a,b +c,d @@\n". This is convenient if we're
going to output a diff, but less so if we actually need to compute using
those numbers, which requires re-parsing the line.
In preparation for moving away from this, let's teach xdiff a new
callback function which gets the broken-out hunk information. To help
callers that don't want to use this new callback, if it's NULL we'll
continue to format the hunk header into a string.
Note that this function renames the "outf" callback to "out_line", as
well. This isn't strictly necessary, but helps in two ways:
1. Now that there are two callbacks, it's nice to use more descriptive
names.
2. Many callers did not zero the emit_callback_data struct, and needed
to be modified to set ecb.out_hunk to NULL. By changing the name of
the existing struct member, that guarantees that any new callers
from in-flight topics will break the build and be examined
manually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-02 07:35:01 +01:00
|
|
|
return 0;
|
|
|
|
}
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
xdiff: provide a separate emit callback for hunks
The xdiff library always emits hunk header lines to our callbacks as
formatted strings like "@@ -a,b +c,d @@\n". This is convenient if we're
going to output a diff, but less so if we actually need to compute using
those numbers, which requires re-parsing the line.
In preparation for moving away from this, let's teach xdiff a new
callback function which gets the broken-out hunk information. To help
callers that don't want to use this new callback, if it's NULL we'll
continue to format the hunk header into a string.
Note that this function renames the "outf" callback to "out_line", as
well. This isn't strictly necessary, but helps in two ways:
1. Now that there are two callbacks, it's nice to use more descriptive
names.
2. Many callers did not zero the emit_callback_data struct, and needed
to be modified to set ecb.out_hunk to NULL. By changing the name of
the existing struct member, that guarantees that any new callers
from in-flight topics will break the build and be examined
manually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-02 07:35:01 +01:00
|
|
|
int xdl_emit_hunk_hdr(long s1, long c1, long s2, long c2,
|
|
|
|
const char *func, long funclen,
|
|
|
|
xdemitcb_t *ecb) {
|
|
|
|
if (!ecb->out_hunk)
|
|
|
|
return xdl_format_hunk_hdr(s1, c1, s2, c2, func, funclen, ecb);
|
|
|
|
if (ecb->out_hunk(ecb->priv,
|
|
|
|
c1 ? s1 : s1 - 1, c1,
|
|
|
|
c2 ? s2 : s2 - 1, c2,
|
|
|
|
func, funclen) < 0)
|
|
|
|
return -1;
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
return 0;
|
|
|
|
}
|
2011-07-07 06:23:57 +02:00
|
|
|
|
|
|
|
int xdl_fall_back_diff(xdfenv_t *diff_env, xpparam_t const *xpp,
|
|
|
|
int line1, int count1, int line2, int count2)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* This probably does not work outside Git, since
|
|
|
|
* we have a very simple mmfile structure.
|
|
|
|
*
|
|
|
|
* Note: ideally, we would reuse the prepared environment, but
|
|
|
|
* the libxdiff interface does not (yet) allow for diffing only
|
|
|
|
* ranges of lines instead of the whole files.
|
|
|
|
*/
|
|
|
|
mmfile_t subfile1, subfile2;
|
|
|
|
xdfenv_t env;
|
|
|
|
|
|
|
|
subfile1.ptr = (char *)diff_env->xdf1.recs[line1 - 1]->ptr;
|
|
|
|
subfile1.size = diff_env->xdf1.recs[line1 + count1 - 2]->ptr +
|
|
|
|
diff_env->xdf1.recs[line1 + count1 - 2]->size - subfile1.ptr;
|
|
|
|
subfile2.ptr = (char *)diff_env->xdf2.recs[line2 - 1]->ptr;
|
|
|
|
subfile2.size = diff_env->xdf2.recs[line2 + count2 - 2]->ptr +
|
|
|
|
diff_env->xdf2.recs[line2 + count2 - 2]->size - subfile2.ptr;
|
|
|
|
if (xdl_do_diff(&subfile1, &subfile2, xpp, &env) < 0)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
memcpy(diff_env->xdf1.rchg + line1 - 1, env.xdf1.rchg, count1);
|
|
|
|
memcpy(diff_env->xdf2.rchg + line2 - 1, env.xdf2.rchg, count2);
|
|
|
|
|
|
|
|
xdl_free_env(&env);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|