git-commit-vandalism/lib/spellcheck.tcl

416 lines
9.4 KiB
Tcl
Raw Normal View History

# git-gui spellchecking support through ispell/aspell
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
# Copyright (C) 2008 Shawn Pearce
class spellcheck {
field s_fd {} ; # pipe to ispell/aspell
field s_version {} ; # ispell/aspell version string
field s_lang {} ; # current language code
field s_prog aspell; # are we actually old ispell?
field s_failed 0 ; # is $s_prog bogus and not working?
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
field w_text ; # text widget we are spelling
field w_menu ; # context menu for the widget
field s_menuidx 0 ; # last index of insertion into $w_menu
field s_i {} ; # timer registration for _run callbacks
field s_clear 0 ; # did we erase misspelled tags yet?
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
field s_seen [list] ; # lines last seen from $w_text in _run
field s_checked [list] ; # lines already checked
field s_pending [list] ; # [$line $data] sent to ispell/aspell
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
field s_suggest ; # array, list of suggestions, keyed by misspelling
constructor init {pipe_fd ui_text ui_menu} {
set w_text $ui_text
set w_menu $ui_menu
array unset s_suggest
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
bind_button3 $w_text [cb _popup_suggest %X %Y @%x,%y]
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
_connect $this $pipe_fd
return $this
}
method _connect {pipe_fd} {
fconfigure $pipe_fd \
-encoding utf-8 \
-eofchar {} \
-translation lf
if {[gets $pipe_fd s_version] <= 0} {
if {[catch {close $pipe_fd} err]} {
# Eh? Is this actually ispell choking on aspell options?
#
if {$s_prog eq {aspell}
&& [regexp -nocase {^Usage: } $err]
&& ![catch {
set pipe_fd [open [list | $s_prog -v] r]
gets $pipe_fd s_version
close $pipe_fd
}]
&& $s_version ne {}} {
if {{@(#) } eq [string range $s_version 0 4]} {
set s_version [string range $s_version 5 end]
}
set s_failed 1
error_popup [strcat \
[mc "Unsupported spell checker"] \
":\n\n$s_version"]
set s_version {}
return
}
regsub -nocase {^Error: } $err {} err
if {$s_fd eq {}} {
error_popup [strcat [mc "Spell checking is unavailable"] ":\n\n$err"]
} else {
error_popup [strcat \
[mc "Invalid spell checking configuration"] \
":\n\n$err\n\n" \
[mc "Reverting dictionary to %s." $s_lang]]
}
} else {
error_popup [mc "Spell checker silently failed on startup"]
}
return
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
}
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
if {{@(#) } ne [string range $s_version 0 4]} {
catch {close $pipe_fd}
error_popup [strcat [mc "Unrecognized spell checker"] ":\n\n$s_version"]
return
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
}
set s_version [string range [string trim $s_version] 5 end]
regexp \
{International Ispell Version .* \(but really (Aspell .*?)\)$} \
$s_version _junk s_version
regexp {^Aspell (\d)+\.(\d+)} $s_version _junk major minor
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
puts $pipe_fd ! ; # enable terse mode
# fetch the language
if {$major > 0 || ($major == 0 && $minor >= 60)} {
puts $pipe_fd {$$cr master}
flush $pipe_fd
gets $pipe_fd s_lang
regexp {[/\\]([^/\\]+)\.[^\.]+$} $s_lang _ s_lang
} else {
set s_lang {}
}
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
if {$::default_config(gui.spellingdictionary) eq {}
&& [get_config gui.spellingdictionary] eq {}} {
set ::default_config(gui.spellingdictionary) $s_lang
}
if {$s_fd ne {}} {
catch {close $s_fd}
}
set s_fd $pipe_fd
fconfigure $s_fd -blocking 0
fileevent $s_fd readable [cb _read]
$w_text tag conf misspelled \
-foreground red \
-underline 1
array unset s_suggest
set s_seen [list]
set s_checked [list]
set s_pending [list]
_run $this
}
method lang {{n {}}} {
if {$n ne {} && $s_lang ne $n && !$s_failed} {
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
set spell_cmd [list |]
lappend spell_cmd aspell
lappend spell_cmd --master=$n
lappend spell_cmd --mode=none
lappend spell_cmd --encoding=UTF-8
lappend spell_cmd pipe
_connect $this [open $spell_cmd r+]
}
return $s_lang
}
method version {} {
if {$s_version ne {}} {
return "$s_version, $s_lang"
}
return {}
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
}
method stop {} {
while {$s_menuidx > 0} {
$w_menu delete 0
incr s_menuidx -1
}
$w_text tag delete misspelled
catch {close $s_fd}
catch {after cancel $s_i}
set s_fd {}
set s_i {}
set s_lang {}
}
method _popup_suggest {X Y pos} {
while {$s_menuidx > 0} {
$w_menu delete 0
incr s_menuidx -1
}
set b_loc [$w_text index "$pos wordstart"]
set e_loc [_wordend $this $b_loc]
set orig [$w_text get $b_loc $e_loc]
set tags [$w_text tag names $b_loc]
if {[lsearch -exact $tags misspelled] >= 0} {
if {[info exists s_suggest($orig)]} {
set cnt 0
foreach s $s_suggest($orig) {
if {$cnt < 5} {
$w_menu insert $s_menuidx command \
-label $s \
-command [cb _replace $b_loc $e_loc $s]
incr s_menuidx
incr cnt
} else {
break
}
}
} else {
$w_menu insert $s_menuidx command \
-label [mc "No Suggestions"] \
-state disabled
incr s_menuidx
}
$w_menu insert $s_menuidx separator
incr s_menuidx
}
$w_text mark set saved-insert insert
tk_popup $w_menu $X $Y
}
method _replace {b_loc e_loc word} {
$w_text configure -autoseparators 0
$w_text edit separator
$w_text delete $b_loc $e_loc
$w_text insert $b_loc $word
$w_text edit separator
$w_text configure -autoseparators 1
$w_text mark set insert saved-insert
}
method _restart_timer {} {
set s_i [after 300 [cb _run]]
}
proc _match_length {max_line arr_name} {
upvar $arr_name a
if {[llength $a] > $max_line} {
set a [lrange $a 0 $max_line]
}
while {[llength $a] <= $max_line} {
lappend a {}
}
}
method _wordend {pos} {
set pos [$w_text index "$pos wordend"]
set tags [$w_text tag names $pos]
while {[lsearch -exact $tags misspelled] >= 0} {
set pos [$w_text index "$pos +1c"]
set tags [$w_text tag names $pos]
}
return $pos
}
method _run {} {
set cur_pos [$w_text index {insert -1c}]
set cur_line [lindex [split $cur_pos .] 0]
set max_line [lindex [split [$w_text index end] .] 0]
_match_length $max_line s_seen
_match_length $max_line s_checked
# Nothing in the message buffer? Nothing to spellcheck.
#
if {$cur_line == 1
&& $max_line == 2
&& [$w_text get 1.0 end] eq "\n"} {
array unset s_suggest
_restart_timer $this
return
}
set active 0
for {set n 1} {$n <= $max_line} {incr n} {
set s [$w_text get "$n.0" "$n.end"]
# Don't spellcheck the current line unless we are at
# a word boundary. The user might be typing on it.
#
if {$n == $cur_line
&& ![regexp {^\W$} [$w_text get $cur_pos insert]]} {
# If the current word is misspelled remove the tag
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
# but force a spellcheck later.
#
set tags [$w_text tag names $cur_pos]
if {[lsearch -exact $tags misspelled] >= 0} {
$w_text tag remove misspelled \
"$cur_pos wordstart" \
[_wordend $this $cur_pos]
lset s_seen $n $s
lset s_checked $n {}
}
continue
}
if {[lindex $s_seen $n] eq $s
&& [lindex $s_checked $n] ne $s} {
# Don't send empty lines to Aspell it doesn't check them.
#
if {$s eq {}} {
lset s_checked $n $s
continue
}
# Don't send typical s-b-o lines as the emails are
# almost always misspelled according to Aspell.
#
if {[regexp -nocase {^[a-z-]+-by:.*<.*@.*>$} $s]} {
$w_text tag remove misspelled "$n.0" "$n.end"
lset s_checked $n $s
continue
}
puts $s_fd ^$s
lappend s_pending [list $n $s]
set active 1
} else {
# Delay until another idle loop to make sure we don't
# spellcheck lines the user is actively changing.
#
lset s_seen $n $s
}
}
if {$active} {
set s_clear 1
flush $s_fd
} else {
_restart_timer $this
}
}
method _read {} {
while {[gets $s_fd line] >= 0} {
set lineno [lindex $s_pending 0 0]
set line [string trim $line]
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
if {$s_clear} {
$w_text tag remove misspelled "$lineno.0" "$lineno.end"
set s_clear 0
}
if {$line eq {}} {
lset s_checked $lineno [lindex $s_pending 0 1]
set s_pending [lrange $s_pending 1 end]
set s_clear 1
continue
}
set sugg [list]
switch -- [string range $line 0 1] {
{& } {
set line [split [string range $line 2 end] :]
set info [split [lindex $line 0] { }]
set orig [lindex $info 0]
set offs [lindex $info 2]
foreach s [split [lindex $line 1] ,] {
lappend sugg [string range $s 1 end]
}
}
{# } {
set info [split [string range $line 2 end] { }]
set orig [lindex $info 0]
set offs [lindex $info 1]
}
default {
puts stderr "<spell> $line"
continue
}
}
incr offs -1
set b_loc "$lineno.$offs"
set e_loc [$w_text index "$lineno.$offs wordend"]
set curr [$w_text get $b_loc $e_loc]
# At least for English curr = "bob", orig = "bob's"
# so Tk didn't include the 's but Aspell did. We
# try to round out the word.
#
while {$curr ne $orig
&& [string equal -length [string length $curr] $curr $orig]} {
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
set n_loc [$w_text index "$e_loc +1c"]
set n_curr [$w_text get $b_loc $n_loc]
if {$n_curr eq $curr} {
break
}
set curr $n_curr
set e_loc $n_loc
}
if {$curr eq $orig} {
$w_text tag add misspelled $b_loc $e_loc
if {[llength $sugg] > 0} {
set s_suggest($orig) $sugg
} else {
unset -nocomplain s_suggest($orig)
}
} else {
unset -nocomplain s_suggest($orig)
}
}
fconfigure $s_fd -block 1
if {[eof $s_fd]} {
if {![catch {close $s_fd} err]} {
set err [mc "Unexpected EOF from spell checker"]
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
}
catch {after cancel $s_i}
$w_text tag remove misspelled 1.0 end
error_popup [strcat [mc "Spell Checker Failed"] "\n\n" $err]
git-gui: Automatically spell check commit messages as the user types Many user friendly tools like word processors, email editors and web browsers allow users to spell check the message they are writing as they type it, making it easy to identify a common misspelling of a word and correct it on the fly. We now open a bi-directional pipe to Aspell and feed the message text the user is editing off to the program about once every 300 milliseconds. This is frequent enough that the user sees the results almost immediately, but is not so frequent as to cause significant additional load on the system. If the user has modified the message text during the last 300 milliseconds we delay until the next period, ensuring that we avoid flooding the Aspell process with a lot of text while the user is actively typing their message. We wait to send the current message buffer to Aspell until the user is at a word boundary, thus ensuring that we are not likely to ask for misspelled word detection on a word that the user is actively typing, as most words are misspelled when only partially typed, even if the user has thus far typed it correctly. Misspelled words are highlighted in red and are given an underline, causing the word to stand out from the others in the buffer. This is a very common user interface idiom for displaying misspelled words, but differs from one platform to the next in slight variations. For example the Mac OS X system prefers using a dashed red underline, leaving the word in the original text color. Unfortunately the control that Tk gives us over text display is not powerful enough to handle such formatting so we have to work with the least common denominator. The top suggestions for a misspelling are saved in an array and offered to the user when they right-click (or on the Mac ctrl-click) a misspelled word. Selecting an entry from this menu will replace the misspelling with the correction shown. Replacement is integrated with the undo/redo stack so undoing a replacement will restore the misspelled original text. If Aspell could not be started during git-gui launch we silently eat the error and run without spell checking support. This way users who do not have Aspell in their $PATH can continue to use git-gui, although they will not get the advanced spelling functionality. If Aspell started successfully the version line and language are shown in git-gui's about box, below the Tcl/Tk versions. This way the user can verify the Aspell function has been activated. If Aspell crashes while we are running we inform the user with an error dialog and then disable Aspell entirely for the rest of this git-gui session. This prevents us from fork-bombing the system with Aspell instances that always crash when presented with the current message text, should there be a bug in either Aspell or in git-gui's output to it. We escape all input lines with ^, as recommended by the Aspell manual page, as this allows Aspell to properly ignore any input line that is otherwise looking like a command (e.g. ! to enable terse output). By using this escape however we need to correct all word offsets by -1 as Aspell is apparently considering the ^ escape to be part of the line's character count, but our Tk text widget obviously does not. Available dictionaries are offered in the Options dialog, allowing the user to select the language they want to spellcheck commit messages with for the current repository, as well as the global user setting that all repositories inherit. Special thanks to Adam Flott for suggesting connecting git-gui to Aspell for the purpose of spell checking the commit message, and to Wincent Colaiuta for the idea to wait for a word boundary before passing the message over for checking. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-02-07 08:35:25 +01:00
return
}
fconfigure $s_fd -block 0
if {[llength $s_pending] == 0} {
_restart_timer $this
}
}
proc available_langs {} {
set langs [list]
catch {
set fd [open [list | aspell dump dicts] r]
while {[gets $fd line] >= 0} {
if {$line eq {}} continue
lappend langs $line
}
close $fd
}
return $langs
}
}