undef/git-commit-vandalism
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ca6ac7f135
git-commit-vandalism/Documentation/git-verify-pack.txt

54 lines
979 B
Plaintext
Raw Normal View History

[PATCH] Add git-verify-pack command. Given a list of <pack>.idx files, this command validates the index file and the corresponding .pack file for consistency. This patch also uses the same validation mechanism in fsck-cache when the --full flag is used. During normal operation, sha1_file.c verifies that a given .idx file matches the .pack file by comparing the SHA1 checksum stored in .idx file and .pack file as a minimum sanity check. We may further want to check the pack signature and version when we map the pack, but that would be a separate patch. Earlier, errors to map a pack file was not flagged fatal but led to a random fatal error later. This version explicitly die()s when such an error is detected. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-29 11:51:27 +02:00
git-verify-pack(1)
==================
NAME
----
Remove trailing dot after short description Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-09 17:24:50 +01:00
git-verify-pack - Validate packed git archive files
[PATCH] Add git-verify-pack command. Given a list of <pack>.idx files, this command validates the index file and the corresponding .pack file for consistency. This patch also uses the same validation mechanism in fsck-cache when the --full flag is used. During normal operation, sha1_file.c verifies that a given .idx file matches the .pack file by comparing the SHA1 checksum stored in .idx file and .pack file as a minimum sanity check. We may further want to check the pack signature and version when we map the pack, but that would be a separate patch. Earlier, errors to map a pack file was not flagged fatal but led to a random fatal error later. This version explicitly die()s when such an error is detected. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-29 11:51:27 +02:00
SYNOPSIS
--------
Documentation: be consistent about "git-" versus "git " Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-30 08:09:04 +02:00
'git verify-pack' [-v] [--] <pack>.idx ...
[PATCH] Add git-verify-pack command. Given a list of <pack>.idx files, this command validates the index file and the corresponding .pack file for consistency. This patch also uses the same validation mechanism in fsck-cache when the --full flag is used. During normal operation, sha1_file.c verifies that a given .idx file matches the .pack file by comparing the SHA1 checksum stored in .idx file and .pack file as a minimum sanity check. We may further want to check the pack signature and version when we map the pack, but that would be a separate patch. Earlier, errors to map a pack file was not flagged fatal but led to a random fatal error later. This version explicitly die()s when such an error is detected. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-29 11:51:27 +02:00
DESCRIPTION
-----------
Documentation formatting and cleanup Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-30 20:56:34 +02:00
Reads given idx file for packed git archive created with the
manpages: italicize git command names (which were in teletype font) The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-03 07:41:41 +02:00
'git-pack-objects' command and verifies idx file and the
[PATCH] Add git-verify-pack command. Given a list of <pack>.idx files, this command validates the index file and the corresponding .pack file for consistency. This patch also uses the same validation mechanism in fsck-cache when the --full flag is used. During normal operation, sha1_file.c verifies that a given .idx file matches the .pack file by comparing the SHA1 checksum stored in .idx file and .pack file as a minimum sanity check. We may further want to check the pack signature and version when we map the pack, but that would be a separate patch. Earlier, errors to map a pack file was not flagged fatal but led to a random fatal error later. This version explicitly die()s when such an error is detected. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-29 11:51:27 +02:00
corresponding pack file.
OPTIONS
-------
<pack>.idx ...::
The idx files to verify.
[PATCH] Documentation: packed GIT support commands. This adds documentation for creating packed archives, inspecting, validating them, and unpacking them. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-14 09:08:05 +02:00
-v::
After verifying the pack, show list of objects contained
[PATCH] Random documentation fixes The fixes focuses on improving the HTML output. Most noteworthy: - Fix the Makefile to also make various *.html files depend on included files. - Consistently use 'NOTE: ...' instead of '[ ... ]' for additional info. - Fix ending '::' for description lists in OPTION section etc. - Fix paragraphs in description lists ending up as preformated text. - Always use listingblocks (preformatted text wrapped in lines with -----) for examples that span empty lines, so they are put in only one HTML block. - Use '1.' instead of '(1)' for numbered lists. - Fix linking to other GIT docs. - git-rev-list.txt: put option descriptions in an OPTION section. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-03 19:16:30 +02:00
in the pack.
Fix up docs where "--" isn't displayed correctly. A bare "--" doesn't show up in man or html pages correctly as two individual dashes unless backslashed as \-- in the asciidoc source. Note, no backslash is needed inside a literal block. Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05 21:05:24 +02:00
\--::
Documentation/git-verify-pack.txt: added documentation for --. The -- option has been added to the documentation of git-verify-pack. Signed-off-by: Nikolai Weibull <nikolai@bitwi.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-09 00:28:05 +01:00
Do not interpret any more arguments as options.
[PATCH] Documentation: packed GIT support commands. This adds documentation for creating packed archives, inspecting, validating them, and unpacking them. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-14 09:08:05 +02:00
[PATCH] Random documentation fixes The fixes focuses on improving the HTML output. Most noteworthy: - Fix the Makefile to also make various *.html files depend on included files. - Consistently use 'NOTE: ...' instead of '[ ... ]' for additional info. - Fix ending '::' for description lists in OPTION section etc. - Fix paragraphs in description lists ending up as preformated text. - Always use listingblocks (preformatted text wrapped in lines with -----) for examples that span empty lines, so they are put in only one HTML block. - Use '1.' instead of '(1)' for numbered lists. - Fix linking to other GIT docs. - git-rev-list.txt: put option descriptions in an OPTION section. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-03 19:16:30 +02:00
OUTPUT FORMAT
-------------
When specifying the -v option the format used is:
[PATCH] Documentation: packed GIT support commands. This adds documentation for creating packed archives, inspecting, validating them, and unpacking them. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-14 09:08:05 +02:00
add storage size output to 'git verify-pack -v' This can possibly break external scripts that depend on the previous output, but those script can't possibly be critical to Git usage, and fixing them should be trivial. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-28 06:25:20 +01:00
SHA1 type size size-in-pack-file offset-in-packfile
[PATCH] Documentation: packed GIT support commands. This adds documentation for creating packed archives, inspecting, validating them, and unpacking them. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-14 09:08:05 +02:00
[PATCH] Random documentation fixes The fixes focuses on improving the HTML output. Most noteworthy: - Fix the Makefile to also make various *.html files depend on included files. - Consistently use 'NOTE: ...' instead of '[ ... ]' for additional info. - Fix ending '::' for description lists in OPTION section etc. - Fix paragraphs in description lists ending up as preformated text. - Always use listingblocks (preformatted text wrapped in lines with -----) for examples that span empty lines, so they are put in only one HTML block. - Use '1.' instead of '(1)' for numbered lists. - Fix linking to other GIT docs. - git-rev-list.txt: put option descriptions in an OPTION section. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-03 19:16:30 +02:00
for objects that are not deltified in the pack, and
[PATCH] Documentation: packed GIT support commands. This adds documentation for creating packed archives, inspecting, validating them, and unpacking them. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-14 09:08:05 +02:00
add storage size output to 'git verify-pack -v' This can possibly break external scripts that depend on the previous output, but those script can't possibly be critical to Git usage, and fixing them should be trivial. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-28 06:25:20 +01:00
SHA1 type size size-in-packfile offset-in-packfile depth base-SHA1
[PATCH] Random documentation fixes The fixes focuses on improving the HTML output. Most noteworthy: - Fix the Makefile to also make various *.html files depend on included files. - Consistently use 'NOTE: ...' instead of '[ ... ]' for additional info. - Fix ending '::' for description lists in OPTION section etc. - Fix paragraphs in description lists ending up as preformated text. - Always use listingblocks (preformatted text wrapped in lines with -----) for examples that span empty lines, so they are put in only one HTML block. - Use '1.' instead of '(1)' for numbered lists. - Fix linking to other GIT docs. - git-rev-list.txt: put option descriptions in an OPTION section. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-03 19:16:30 +02:00
for objects that are deltified.
[PATCH] Add git-verify-pack command. Given a list of <pack>.idx files, this command validates the index file and the corresponding .pack file for consistency. This patch also uses the same validation mechanism in fsck-cache when the --full flag is used. During normal operation, sha1_file.c verifies that a given .idx file matches the .pack file by comparing the SHA1 checksum stored in .idx file and .pack file as a minimum sanity check. We may further want to check the pack signature and version when we map the pack, but that would be a separate patch. Earlier, errors to map a pack file was not flagged fatal but led to a random fatal error later. This version explicitly die()s when such an error is detected. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-29 11:51:27 +02:00
Author
------
Update my e-mail address The old cox.net address is still getting mails from gitters. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-21 21:14:42 +02:00
Written by Junio C Hamano <gitster@pobox.com>
[PATCH] Add git-verify-pack command. Given a list of <pack>.idx files, this command validates the index file and the corresponding .pack file for consistency. This patch also uses the same validation mechanism in fsck-cache when the --full flag is used. During normal operation, sha1_file.c verifies that a given .idx file matches the .pack file by comparing the SHA1 checksum stored in .idx file and .pack file as a minimum sanity check. We may further want to check the pack signature and version when we map the pack, but that would be a separate patch. Earlier, errors to map a pack file was not flagged fatal but led to a random fatal error later. This version explicitly die()s when such an error is detected. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-29 11:51:27 +02:00
Documentation
--------------
Documentation by Junio C Hamano
GIT
---
documentation: move git(7) to git(1) As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06 09:07:32 +02:00
Part of the linkgit:git[1] suite
Reference in New Issue Copy Permalink