git-commit-vandalism/sha1_file.c

1703 lines
38 KiB
C
Raw Normal View History

/*
* GIT - The information manager from hell
*
* Copyright (C) Linus Torvalds, 2005
*
* This handles basic git sha1 object files - packing, unpacking,
* creation etc.
*/
#include "cache.h"
#include "delta.h"
#include "pack.h"
#ifndef O_NOATIME
#if defined(__linux__) && (defined(__i386__) || defined(__PPC__))
#define O_NOATIME 01000000
#else
#define O_NOATIME 0
#endif
#endif
const unsigned char null_sha1[20] = { 0, };
static unsigned int sha1_file_open_flag = O_NOATIME;
static unsigned hexval(char c)
{
if (c >= '0' && c <= '9')
return c - '0';
if (c >= 'a' && c <= 'f')
return c - 'a' + 10;
if (c >= 'A' && c <= 'F')
return c - 'A' + 10;
return ~0;
}
int get_sha1_hex(const char *hex, unsigned char *sha1)
{
int i;
for (i = 0; i < 20; i++) {
unsigned int val = (hexval(hex[0]) << 4) | hexval(hex[1]);
if (val & ~0xff)
return -1;
*sha1++ = val;
hex += 2;
}
return 0;
}
int adjust_shared_perm(const char *path)
{
struct stat st;
int mode;
if (!shared_repository)
return 0;
if (lstat(path, &st) < 0)
return -1;
mode = st.st_mode;
if (mode & S_IRUSR)
mode |= S_IRGRP;
if (mode & S_IWUSR)
mode |= S_IWGRP;
if (mode & S_IXUSR)
mode |= S_IXGRP;
if (S_ISDIR(mode))
mode |= S_ISGID;
if (chmod(path, mode) < 0)
return -2;
return 0;
}
int safe_create_leading_directories(char *path)
{
char *pos = path;
struct stat st;
if (*pos == '/')
pos++;
while (pos) {
pos = strchr(pos, '/');
if (!pos)
break;
*pos = 0;
if (!stat(path, &st)) {
/* path exists */
if (!S_ISDIR(st.st_mode)) {
*pos = '/';
return -3;
}
}
else if (mkdir(path, 0777)) {
*pos = '/';
return -1;
}
else if (adjust_shared_perm(path)) {
*pos = '/';
return -2;
}
*pos++ = '/';
}
return 0;
}
char * sha1_to_hex(const unsigned char *sha1)
{
static char buffer[50];
static const char hex[] = "0123456789abcdef";
char *buf = buffer;
int i;
for (i = 0; i < 20; i++) {
unsigned int val = *sha1++;
*buf++ = hex[val >> 4];
*buf++ = hex[val & 0xf];
}
*buf = '\0';
return buffer;
}
static void fill_sha1_path(char *pathbuf, const unsigned char *sha1)
{
int i;
for (i = 0; i < 20; i++) {
static char hex[] = "0123456789abcdef";
unsigned int val = sha1[i];
char *pos = pathbuf + i*2 + (i > 0);
*pos++ = hex[val >> 4];
*pos = hex[val & 0xf];
}
}
/*
* NOTE! This returns a statically allocated buffer, so you have to be
* careful about using it. Do a "strdup()" if you need to save the
* filename.
*
* Also note that this returns the location for creating. Reading
* SHA1 file can happen from any alternate directory listed in the
Rename environment variables. H. Peter Anvin mentioned that using SHA1_whatever as an environment variable name is not nice and we should instead use names starting with "GIT_" prefix to avoid conflicts. Here is what this patch does: * Renames the following environment variables: New name Old Name GIT_AUTHOR_DATE AUTHOR_DATE GIT_AUTHOR_EMAIL AUTHOR_EMAIL GIT_AUTHOR_NAME AUTHOR_NAME GIT_COMMITTER_EMAIL COMMIT_AUTHOR_EMAIL GIT_COMMITTER_NAME COMMIT_AUTHOR_NAME GIT_ALTERNATE_OBJECT_DIRECTORIES SHA1_FILE_DIRECTORIES GIT_OBJECT_DIRECTORY SHA1_FILE_DIRECTORY * Introduces a compatibility macro, gitenv(), which does an getenv() and if it fails calls gitenv_bc(), which in turn picks up the value from old name while giving a warning about using an old name. * Changes all users of the environment variable to fetch environment variable with the new name using gitenv(). * Updates the documentation and scripts shipped with Linus GIT distribution. The transition plan is as follows: * We will keep the backward compatibility list used by gitenv() for now, so the current scripts and user environments continue to work as before. The users will get warnings when they have old name but not new name in their environment to the stderr. * The Porcelain layers should start using new names. However, just in case it ends up calling old Plumbing layer implementation, they should also export old names, taking values from the corresponding new names, during the transition period. * After a transition period, we would drop the compatibility support and drop gitenv(). Revert the callers to directly call getenv() but keep using the new names. The last part is probably optional and the transition duration needs to be set to a reasonable value. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-05-10 02:57:56 +02:00
* DB_ENVIRONMENT environment variable if it is not found in
* the primary object database.
*/
char *sha1_file_name(const unsigned char *sha1)
{
static char *name, *base;
if (!base) {
Rename environment variables. H. Peter Anvin mentioned that using SHA1_whatever as an environment variable name is not nice and we should instead use names starting with "GIT_" prefix to avoid conflicts. Here is what this patch does: * Renames the following environment variables: New name Old Name GIT_AUTHOR_DATE AUTHOR_DATE GIT_AUTHOR_EMAIL AUTHOR_EMAIL GIT_AUTHOR_NAME AUTHOR_NAME GIT_COMMITTER_EMAIL COMMIT_AUTHOR_EMAIL GIT_COMMITTER_NAME COMMIT_AUTHOR_NAME GIT_ALTERNATE_OBJECT_DIRECTORIES SHA1_FILE_DIRECTORIES GIT_OBJECT_DIRECTORY SHA1_FILE_DIRECTORY * Introduces a compatibility macro, gitenv(), which does an getenv() and if it fails calls gitenv_bc(), which in turn picks up the value from old name while giving a warning about using an old name. * Changes all users of the environment variable to fetch environment variable with the new name using gitenv(). * Updates the documentation and scripts shipped with Linus GIT distribution. The transition plan is as follows: * We will keep the backward compatibility list used by gitenv() for now, so the current scripts and user environments continue to work as before. The users will get warnings when they have old name but not new name in their environment to the stderr. * The Porcelain layers should start using new names. However, just in case it ends up calling old Plumbing layer implementation, they should also export old names, taking values from the corresponding new names, during the transition period. * After a transition period, we would drop the compatibility support and drop gitenv(). Revert the callers to directly call getenv() but keep using the new names. The last part is probably optional and the transition duration needs to be set to a reasonable value. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-05-10 02:57:56 +02:00
const char *sha1_file_directory = get_object_directory();
int len = strlen(sha1_file_directory);
base = xmalloc(len + 60);
memcpy(base, sha1_file_directory, len);
memset(base+len, 0, 60);
base[len] = '/';
base[len+3] = '/';
name = base + len + 1;
}
fill_sha1_path(name, sha1);
return base;
}
char *sha1_pack_name(const unsigned char *sha1)
{
static const char hex[] = "0123456789abcdef";
static char *name, *base, *buf;
int i;
if (!base) {
const char *sha1_file_directory = get_object_directory();
int len = strlen(sha1_file_directory);
base = xmalloc(len + 60);
sprintf(base, "%s/pack/pack-1234567890123456789012345678901234567890.pack", sha1_file_directory);
name = base + len + 11;
}
buf = name;
for (i = 0; i < 20; i++) {
unsigned int val = *sha1++;
*buf++ = hex[val >> 4];
*buf++ = hex[val & 0xf];
}
return base;
}
char *sha1_pack_index_name(const unsigned char *sha1)
{
static const char hex[] = "0123456789abcdef";
static char *name, *base, *buf;
int i;
if (!base) {
const char *sha1_file_directory = get_object_directory();
int len = strlen(sha1_file_directory);
base = xmalloc(len + 60);
sprintf(base, "%s/pack/pack-1234567890123456789012345678901234567890.idx", sha1_file_directory);
name = base + len + 11;
}
buf = name;
for (i = 0; i < 20; i++) {
unsigned int val = *sha1++;
*buf++ = hex[val >> 4];
*buf++ = hex[val & 0xf];
}
return base;
}
struct alternate_object_database *alt_odb_list;
static struct alternate_object_database **alt_odb_tail;
/*
* Prepare alternate object database registry.
*
* The variable alt_odb_list points at the list of struct
* alternate_object_database. The elements on this list come from
* non-empty elements from colon separated ALTERNATE_DB_ENVIRONMENT
* environment variable, and $GIT_OBJECT_DIRECTORY/info/alternates,
* whose contents is similar to that environment variable but can be
* LF separated. Its base points at a statically allocated buffer that
* contains "/the/directory/corresponding/to/.git/objects/...", while
* its name points just after the slash at the end of ".git/objects/"
* in the example above, and has enough space to hold 40-byte hex
* SHA1, an extra slash for the first level indirection, and the
* terminating NUL.
*/
static void link_alt_odb_entries(const char *alt, const char *ep, int sep,
const char *relative_base)
{
const char *cp, *last;
struct alternate_object_database *ent;
const char *objdir = get_object_directory();
int base_len = -1;
last = alt;
while (last < ep) {
cp = last;
if (cp < ep && *cp == '#') {
while (cp < ep && *cp != sep)
cp++;
last = cp + 1;
continue;
}
for ( ; cp < ep && *cp != sep; cp++)
;
if (last != cp) {
struct stat st;
struct alternate_object_database *alt;
/* 43 = 40-byte + 2 '/' + terminating NUL */
int pfxlen = cp - last;
int entlen = pfxlen + 43;
if (*last != '/' && relative_base) {
/* Relative alt-odb */
if (base_len < 0)
base_len = strlen(relative_base) + 1;
entlen += base_len;
pfxlen += base_len;
}
ent = xmalloc(sizeof(*ent) + entlen);
if (*last != '/' && relative_base) {
memcpy(ent->base, relative_base, base_len - 1);
ent->base[base_len - 1] = '/';
memcpy(ent->base + base_len,
last, cp - last);
}
else
memcpy(ent->base, last, pfxlen);
ent->name = ent->base + pfxlen + 1;
ent->base[pfxlen + 3] = '/';
ent->base[pfxlen] = ent->base[entlen-1] = 0;
/* Detect cases where alternate disappeared */
if (stat(ent->base, &st) || !S_ISDIR(st.st_mode)) {
error("object directory %s does not exist; "
"check .git/objects/info/alternates.",
ent->base);
goto bad;
}
ent->base[pfxlen] = '/';
/* Prevent the common mistake of listing the same
* thing twice, or object directory itself.
*/
for (alt = alt_odb_list; alt; alt = alt->next)
if (!memcmp(ent->base, alt->base, pfxlen))
goto bad;
if (!memcmp(ent->base, objdir, pfxlen)) {
bad:
free(ent);
}
else {
*alt_odb_tail = ent;
alt_odb_tail = &(ent->next);
ent->next = NULL;
}
}
while (cp < ep && *cp == sep)
cp++;
last = cp;
}
}
void prepare_alt_odb(void)
{
char path[PATH_MAX];
char *map;
int fd;
struct stat st;
char *alt;
alt = getenv(ALTERNATE_DB_ENVIRONMENT);
if (!alt) alt = "";
if (alt_odb_tail)
return;
alt_odb_tail = &alt_odb_list;
link_alt_odb_entries(alt, alt + strlen(alt), ':', NULL);
sprintf(path, "%s/info/alternates", get_object_directory());
fd = open(path, O_RDONLY);
if (fd < 0)
return;
if (fstat(fd, &st) || (st.st_size == 0)) {
close(fd);
return;
}
map = mmap(NULL, st.st_size, PROT_READ, MAP_PRIVATE, fd, 0);
close(fd);
if (map == MAP_FAILED)
return;
link_alt_odb_entries(map, map + st.st_size, '\n',
get_object_directory());
munmap(map, st.st_size);
}
static char *find_sha1_file(const unsigned char *sha1, struct stat *st)
{
char *name = sha1_file_name(sha1);
struct alternate_object_database *alt;
if (!stat(name, st))
return name;
prepare_alt_odb();
for (alt = alt_odb_list; alt; alt = alt->next) {
name = alt->name;
fill_sha1_path(name, sha1);
if (!stat(alt->base, st))
return alt->base;
}
return NULL;
}
#define PACK_MAX_SZ (1<<26)
static int pack_used_ctr;
static unsigned long pack_mapped;
struct packed_git *packed_git;
static int check_packed_git_idx(const char *path, unsigned long *idx_size_,
void **idx_map_)
{
void *idx_map;
unsigned int *index;
unsigned long idx_size;
int nr, i;
int fd = open(path, O_RDONLY);
struct stat st;
if (fd < 0)
return -1;
if (fstat(fd, &st)) {
close(fd);
return -1;
}
idx_size = st.st_size;
idx_map = mmap(NULL, idx_size, PROT_READ, MAP_PRIVATE, fd, 0);
close(fd);
if (idx_map == MAP_FAILED)
return -1;
index = idx_map;
*idx_map_ = idx_map;
*idx_size_ = idx_size;
/* check index map */
if (idx_size < 4*256 + 20 + 20)
return error("index file too small");
nr = 0;
for (i = 0; i < 256; i++) {
unsigned int n = ntohl(index[i]);
if (n < nr)
return error("non-monotonic index");
nr = n;
}
/*
* Total size:
* - 256 index entries 4 bytes each
* - 24-byte entries * nr (20-byte sha1 + 4-byte offset)
* - 20-byte SHA1 of the packfile
* - 20-byte SHA1 file checksum
*/
if (idx_size != 4*256 + nr * 24 + 20 + 20)
return error("wrong index file size");
return 0;
}
static int unuse_one_packed_git(void)
{
struct packed_git *p, *lru = NULL;
for (p = packed_git; p; p = p->next) {
if (p->pack_use_cnt || !p->pack_base)
continue;
if (!lru || p->pack_last_used < lru->pack_last_used)
lru = p;
}
if (!lru)
return 0;
munmap(lru->pack_base, lru->pack_size);
lru->pack_base = NULL;
return 1;
}
void unuse_packed_git(struct packed_git *p)
{
p->pack_use_cnt--;
}
int use_packed_git(struct packed_git *p)
{
if (!p->pack_size) {
struct stat st;
// We created the struct before we had the pack
stat(p->pack_name, &st);
if (!S_ISREG(st.st_mode))
die("packfile %s not a regular file", p->pack_name);
p->pack_size = st.st_size;
}
if (!p->pack_base) {
int fd;
struct stat st;
void *map;
pack_mapped += p->pack_size;
while (PACK_MAX_SZ < pack_mapped && unuse_one_packed_git())
; /* nothing */
fd = open(p->pack_name, O_RDONLY);
if (fd < 0)
die("packfile %s cannot be opened", p->pack_name);
if (fstat(fd, &st)) {
close(fd);
die("packfile %s cannot be opened", p->pack_name);
}
if (st.st_size != p->pack_size)
die("packfile %s size mismatch.", p->pack_name);
map = mmap(NULL, p->pack_size, PROT_READ, MAP_PRIVATE, fd, 0);
close(fd);
if (map == MAP_FAILED)
die("packfile %s cannot be mapped.", p->pack_name);
p->pack_base = map;
/* Check if the pack file matches with the index file.
* this is cheap.
*/
if (memcmp((char*)(p->index_base) + p->index_size - 40,
p->pack_base + p->pack_size - 20, 20)) {
die("packfile %s does not match index.", p->pack_name);
}
}
p->pack_last_used = pack_used_ctr++;
p->pack_use_cnt++;
return 0;
}
struct packed_git *add_packed_git(char *path, int path_len, int local)
{
struct stat st;
struct packed_git *p;
unsigned long idx_size;
void *idx_map;
unsigned char sha1[20];
if (check_packed_git_idx(path, &idx_size, &idx_map))
return NULL;
/* do we have a corresponding .pack file? */
strcpy(path + path_len - 4, ".pack");
if (stat(path, &st) || !S_ISREG(st.st_mode)) {
munmap(idx_map, idx_size);
return NULL;
}
/* ok, it looks sane as far as we can check without
* actually mapping the pack file.
*/
p = xmalloc(sizeof(*p) + path_len + 2);
strcpy(p->pack_name, path);
p->index_size = idx_size;
p->pack_size = st.st_size;
p->index_base = idx_map;
p->next = NULL;
p->pack_base = NULL;
p->pack_last_used = 0;
p->pack_use_cnt = 0;
p->pack_local = local;
if ((path_len > 44) && !get_sha1_hex(path + path_len - 44, sha1))
memcpy(p->sha1, sha1, 20);
return p;
}
struct packed_git *parse_pack_index(unsigned char *sha1)
{
char *path = sha1_pack_index_name(sha1);
return parse_pack_index_file(sha1, path);
}
struct packed_git *parse_pack_index_file(const unsigned char *sha1, char *idx_path)
{
struct packed_git *p;
unsigned long idx_size;
void *idx_map;
char *path;
if (check_packed_git_idx(idx_path, &idx_size, &idx_map))
return NULL;
path = sha1_pack_name(sha1);
p = xmalloc(sizeof(*p) + strlen(path) + 2);
strcpy(p->pack_name, path);
p->index_size = idx_size;
p->pack_size = 0;
p->index_base = idx_map;
p->next = NULL;
p->pack_base = NULL;
p->pack_last_used = 0;
p->pack_use_cnt = 0;
memcpy(p->sha1, sha1, 20);
return p;
}
void install_packed_git(struct packed_git *pack)
{
pack->next = packed_git;
packed_git = pack;
}
static void prepare_packed_git_one(char *objdir, int local)
{
char path[PATH_MAX];
int len;
DIR *dir;
struct dirent *de;
sprintf(path, "%s/pack", objdir);
len = strlen(path);
dir = opendir(path);
if (!dir) {
if (errno != ENOENT)
error("unable to open object pack directory: %s: %s",
path, strerror(errno));
return;
}
path[len++] = '/';
while ((de = readdir(dir)) != NULL) {
int namelen = strlen(de->d_name);
struct packed_git *p;
if (strcmp(de->d_name + namelen - 4, ".idx"))
continue;
/* we have .idx. Is it a file we can map? */
strcpy(path + len, de->d_name);
p = add_packed_git(path, len + namelen, local);
if (!p)
continue;
p->next = packed_git;
packed_git = p;
}
closedir(dir);
}
void prepare_packed_git(void)
{
static int run_once = 0;
struct alternate_object_database *alt;
if (run_once)
return;
prepare_packed_git_one(get_object_directory(), 1);
prepare_alt_odb();
for (alt = alt_odb_list; alt; alt = alt->next) {
alt->name[-1] = 0;
prepare_packed_git_one(alt->base, 0);
alt->name[-1] = '/';
}
run_once = 1;
}
int check_sha1_signature(const unsigned char *sha1, void *map, unsigned long size, const char *type)
{
char header[100];
unsigned char real_sha1[20];
SHA_CTX c;
SHA1_Init(&c);
SHA1_Update(&c, header, 1+sprintf(header, "%s %lu", type, size));
SHA1_Update(&c, map, size);
SHA1_Final(real_sha1, &c);
return memcmp(sha1, real_sha1, 20) ? -1 : 0;
}
static void *map_sha1_file_internal(const unsigned char *sha1,
unsigned long *size)
{
struct stat st;
void *map;
int fd;
char *filename = find_sha1_file(sha1, &st);
if (!filename) {
return NULL;
}
fd = open(filename, O_RDONLY | sha1_file_open_flag);
if (fd < 0) {
/* See if it works without O_NOATIME */
switch (sha1_file_open_flag) {
default:
fd = open(filename, O_RDONLY);
if (fd >= 0)
break;
/* Fallthrough */
case 0:
return NULL;
}
/* If it failed once, it will probably fail again.
* Stop using O_NOATIME
*/
sha1_file_open_flag = 0;
}
map = mmap(NULL, st.st_size, PROT_READ, MAP_PRIVATE, fd, 0);
close(fd);
if (map == MAP_FAILED)
return NULL;
*size = st.st_size;
return map;
}
int unpack_sha1_header(z_stream *stream, void *map, unsigned long mapsize, void *buffer, unsigned long size)
{
/* Get the data stream */
memset(stream, 0, sizeof(*stream));
stream->next_in = map;
stream->avail_in = mapsize;
stream->next_out = buffer;
stream->avail_out = size;
inflateInit(stream);
return inflate(stream, 0);
}
static void *unpack_sha1_rest(z_stream *stream, void *buffer, unsigned long size)
{
int bytes = strlen(buffer) + 1;
unsigned char *buf = xmalloc(1+size);
memcpy(buf, buffer + bytes, stream->total_out - bytes);
bytes = stream->total_out - bytes;
if (bytes < size) {
stream->next_out = buf + bytes;
stream->avail_out = size - bytes;
while (inflate(stream, Z_FINISH) == Z_OK)
/* nothing */;
}
buf[size] = 0;
inflateEnd(stream);
return buf;
}
/*
* We used to just use "sscanf()", but that's actually way
* too permissive for what we want to check. So do an anal
* object header parse by hand.
*/
int parse_sha1_header(char *hdr, char *type, unsigned long *sizep)
{
int i;
unsigned long size;
/*
* The type can be at most ten bytes (including the
* terminating '\0' that we add), and is followed by
* a space.
*/
i = 10;
for (;;) {
char c = *hdr++;
if (c == ' ')
break;
if (!--i)
return -1;
*type++ = c;
}
*type = 0;
/*
* The length must follow immediately, and be in canonical
* decimal format (ie "010" is not valid).
*/
size = *hdr++ - '0';
if (size > 9)
return -1;
if (size) {
for (;;) {
unsigned long c = *hdr - '0';
if (c > 9)
break;
hdr++;
size = size * 10 + c;
}
}
*sizep = size;
/*
* The length must be followed by a zero byte
*/
return *hdr ? -1 : 0;
}
void * unpack_sha1_file(void *map, unsigned long mapsize, char *type, unsigned long *size)
{
int ret;
z_stream stream;
char hdr[8192];
ret = unpack_sha1_header(&stream, map, mapsize, hdr, sizeof(hdr));
if (ret < Z_OK || parse_sha1_header(hdr, type, size) < 0)
return NULL;
return unpack_sha1_rest(&stream, hdr, *size);
}
/* forward declaration for a mutually recursive function */
static int packed_object_info(struct pack_entry *entry,
char *type, unsigned long *sizep);
static int packed_delta_info(unsigned char *base_sha1,
unsigned long delta_size,
unsigned long left,
char *type,
unsigned long *sizep,
struct packed_git *p)
{
struct pack_entry base_ent;
if (left < 20)
die("truncated pack file");
/* The base entry _must_ be in the same pack */
if (!find_pack_entry_one(base_sha1, &base_ent, p))
die("failed to find delta-pack base object %s",
sha1_to_hex(base_sha1));
/* We choose to only get the type of the base object and
* ignore potentially corrupt pack file that expects the delta
* based on a base with a wrong size. This saves tons of
* inflate() calls.
*/
if (packed_object_info(&base_ent, type, NULL))
die("cannot get info for delta-pack base");
if (sizep) {
const unsigned char *data;
unsigned char delta_head[64];
unsigned long result_size;
z_stream stream;
int st;
memset(&stream, 0, sizeof(stream));
data = stream.next_in = base_sha1 + 20;
stream.avail_in = left - 20;
stream.next_out = delta_head;
stream.avail_out = sizeof(delta_head);
inflateInit(&stream);
st = inflate(&stream, Z_FINISH);
inflateEnd(&stream);
if ((st != Z_STREAM_END) &&
stream.total_out != sizeof(delta_head))
die("delta data unpack-initial failed");
/* Examine the initial part of the delta to figure out
* the result size.
*/
data = delta_head;
get_delta_hdr_size(&data); /* ignore base size */
/* Read the result size */
result_size = get_delta_hdr_size(&data);
*sizep = result_size;
}
return 0;
}
static unsigned long unpack_object_header(struct packed_git *p, unsigned long offset,
enum object_type *type, unsigned long *sizep)
{
unsigned shift;
unsigned char *pack, c;
unsigned long size;
if (offset >= p->pack_size)
die("object offset outside of pack file");
pack = p->pack_base + offset;
c = *pack++;
offset++;
*type = (c >> 4) & 7;
size = c & 15;
shift = 4;
while (c & 0x80) {
if (offset >= p->pack_size)
die("object offset outside of pack file");
c = *pack++;
offset++;
size += (c & 0x7f) << shift;
shift += 7;
}
*sizep = size;
return offset;
}
int check_reuse_pack_delta(struct packed_git *p, unsigned long offset,
unsigned char *base, unsigned long *sizep,
enum object_type *kindp)
{
unsigned long ptr;
int status = -1;
use_packed_git(p);
ptr = offset;
ptr = unpack_object_header(p, ptr, kindp, sizep);
if (*kindp != OBJ_DELTA)
goto done;
memcpy(base, p->pack_base + ptr, 20);
status = 0;
done:
unuse_packed_git(p);
return status;
}
void packed_object_info_detail(struct pack_entry *e,
char *type,
unsigned long *size,
unsigned long *store_size,
unsigned int *delta_chain_length,
unsigned char *base_sha1)
{
struct packed_git *p = e->p;
unsigned long offset, left;
unsigned char *pack;
enum object_type kind;
offset = unpack_object_header(p, e->offset, &kind, size);
pack = p->pack_base + offset;
left = p->pack_size - offset;
if (kind != OBJ_DELTA)
*delta_chain_length = 0;
else {
unsigned int chain_length = 0;
memcpy(base_sha1, pack, 20);
do {
struct pack_entry base_ent;
unsigned long junk;
find_pack_entry_one(pack, &base_ent, p);
offset = unpack_object_header(p, base_ent.offset,
&kind, &junk);
pack = p->pack_base + offset;
chain_length++;
} while (kind == OBJ_DELTA);
*delta_chain_length = chain_length;
}
switch (kind) {
case OBJ_COMMIT:
strcpy(type, "commit");
break;
case OBJ_TREE:
strcpy(type, "tree");
break;
case OBJ_BLOB:
strcpy(type, "blob");
break;
case OBJ_TAG:
strcpy(type, "tag");
break;
default:
die("corrupted pack file %s containing object of kind %d",
p->pack_name, kind);
}
*store_size = 0; /* notyet */
}
static int packed_object_info(struct pack_entry *entry,
char *type, unsigned long *sizep)
{
struct packed_git *p = entry->p;
unsigned long offset, size, left;
unsigned char *pack;
enum object_type kind;
int retval;
if (use_packed_git(p))
die("cannot map packed file");
offset = unpack_object_header(p, entry->offset, &kind, &size);
pack = p->pack_base + offset;
left = p->pack_size - offset;
switch (kind) {
case OBJ_DELTA:
retval = packed_delta_info(pack, size, left, type, sizep, p);
unuse_packed_git(p);
return retval;
case OBJ_COMMIT:
strcpy(type, "commit");
break;
case OBJ_TREE:
strcpy(type, "tree");
break;
case OBJ_BLOB:
strcpy(type, "blob");
break;
case OBJ_TAG:
strcpy(type, "tag");
break;
default:
die("corrupted pack file %s containing object of kind %d",
p->pack_name, kind);
}
if (sizep)
*sizep = size;
unuse_packed_git(p);
return 0;
}
/* forward declaration for a mutually recursive function */
static void *unpack_entry(struct pack_entry *, char *, unsigned long *);
static void *unpack_delta_entry(unsigned char *base_sha1,
unsigned long delta_size,
unsigned long left,
char *type,
unsigned long *sizep,
struct packed_git *p)
{
struct pack_entry base_ent;
void *data, *delta_data, *result, *base;
unsigned long data_size, result_size, base_size;
z_stream stream;
int st;
if (left < 20)
die("truncated pack file");
data = base_sha1 + 20;
data_size = left - 20;
delta_data = xmalloc(delta_size);
memset(&stream, 0, sizeof(stream));
stream.next_in = data;
stream.avail_in = data_size;
stream.next_out = delta_data;
stream.avail_out = delta_size;
inflateInit(&stream);
st = inflate(&stream, Z_FINISH);
inflateEnd(&stream);
if ((st != Z_STREAM_END) || stream.total_out != delta_size)
die("delta data unpack failed");
/* The base entry _must_ be in the same pack */
if (!find_pack_entry_one(base_sha1, &base_ent, p))
die("failed to find delta-pack base object %s",
sha1_to_hex(base_sha1));
base = unpack_entry_gently(&base_ent, type, &base_size);
if (!base)
die("failed to read delta-pack base object %s",
sha1_to_hex(base_sha1));
result = patch_delta(base, base_size,
delta_data, delta_size,
&result_size);
if (!result)
die("failed to apply delta");
free(delta_data);
free(base);
*sizep = result_size;
return result;
}
static void *unpack_non_delta_entry(unsigned char *data,
unsigned long size,
unsigned long left)
{
int st;
z_stream stream;
unsigned char *buffer;
buffer = xmalloc(size + 1);
buffer[size] = 0;
memset(&stream, 0, sizeof(stream));
stream.next_in = data;
stream.avail_in = left;
stream.next_out = buffer;
stream.avail_out = size;
inflateInit(&stream);
st = inflate(&stream, Z_FINISH);
inflateEnd(&stream);
if ((st != Z_STREAM_END) || stream.total_out != size) {
free(buffer);
return NULL;
}
return buffer;
}
static void *unpack_entry(struct pack_entry *entry,
char *type, unsigned long *sizep)
{
struct packed_git *p = entry->p;
void *retval;
if (use_packed_git(p))
die("cannot map packed file");
retval = unpack_entry_gently(entry, type, sizep);
unuse_packed_git(p);
if (!retval)
die("corrupted pack file %s", p->pack_name);
return retval;
}
/* The caller is responsible for use_packed_git()/unuse_packed_git() pair */
void *unpack_entry_gently(struct pack_entry *entry,
char *type, unsigned long *sizep)
{
struct packed_git *p = entry->p;
unsigned long offset, size, left;
unsigned char *pack;
enum object_type kind;
void *retval;
offset = unpack_object_header(p, entry->offset, &kind, &size);
pack = p->pack_base + offset;
left = p->pack_size - offset;
switch (kind) {
case OBJ_DELTA:
retval = unpack_delta_entry(pack, size, left, type, sizep, p);
return retval;
case OBJ_COMMIT:
strcpy(type, "commit");
break;
case OBJ_TREE:
strcpy(type, "tree");
break;
case OBJ_BLOB:
strcpy(type, "blob");
break;
case OBJ_TAG:
strcpy(type, "tag");
break;
default:
return NULL;
}
*sizep = size;
retval = unpack_non_delta_entry(pack, size, left);
return retval;
}
int num_packed_objects(const struct packed_git *p)
{
/* See check_packed_git_idx() */
return (p->index_size - 20 - 20 - 4*256) / 24;
}
int nth_packed_object_sha1(const struct packed_git *p, int n,
unsigned char* sha1)
{
void *index = p->index_base + 256;
if (n < 0 || num_packed_objects(p) <= n)
return -1;
memcpy(sha1, (index + 24 * n + 4), 20);
return 0;
}
int find_pack_entry_one(const unsigned char *sha1,
struct pack_entry *e, struct packed_git *p)
{
unsigned int *level1_ofs = p->index_base;
int hi = ntohl(level1_ofs[*sha1]);
int lo = ((*sha1 == 0x0) ? 0 : ntohl(level1_ofs[*sha1 - 1]));
void *index = p->index_base + 256;
do {
int mi = (lo + hi) / 2;
int cmp = memcmp(index + 24 * mi + 4, sha1, 20);
if (!cmp) {
e->offset = ntohl(*((int*)(index + 24 * mi)));
memcpy(e->sha1, sha1, 20);
e->p = p;
return 1;
}
if (cmp > 0)
hi = mi;
else
lo = mi+1;
} while (lo < hi);
return 0;
}
static int find_pack_entry(const unsigned char *sha1, struct pack_entry *e)
{
struct packed_git *p;
prepare_packed_git();
for (p = packed_git; p; p = p->next) {
if (find_pack_entry_one(sha1, e, p))
return 1;
}
return 0;
}
struct packed_git *find_sha1_pack(const unsigned char *sha1,
struct packed_git *packs)
{
struct packed_git *p;
struct pack_entry e;
for (p = packs; p; p = p->next) {
if (find_pack_entry_one(sha1, &e, p))
return p;
}
return NULL;
}
int sha1_object_info(const unsigned char *sha1, char *type, unsigned long *sizep)
{
int status;
unsigned long mapsize, size;
void *map;
z_stream stream;
char hdr[128];
map = map_sha1_file_internal(sha1, &mapsize);
if (!map) {
struct pack_entry e;
if (!find_pack_entry(sha1, &e))
return error("unable to find %s", sha1_to_hex(sha1));
return packed_object_info(&e, type, sizep);
}
if (unpack_sha1_header(&stream, map, mapsize, hdr, sizeof(hdr)) < 0)
status = error("unable to unpack %s header",
sha1_to_hex(sha1));
if (parse_sha1_header(hdr, type, &size) < 0)
status = error("unable to parse %s header", sha1_to_hex(sha1));
else {
status = 0;
if (sizep)
*sizep = size;
}
inflateEnd(&stream);
munmap(map, mapsize);
return status;
}
static void *read_packed_sha1(const unsigned char *sha1, char *type, unsigned long *size)
{
struct pack_entry e;
if (!find_pack_entry(sha1, &e)) {
error("cannot read sha1_file for %s", sha1_to_hex(sha1));
return NULL;
}
return unpack_entry(&e, type, size);
}
void * read_sha1_file(const unsigned char *sha1, char *type, unsigned long *size)
{
unsigned long mapsize;
void *map, *buf;
struct pack_entry e;
if (find_pack_entry(sha1, &e))
return read_packed_sha1(sha1, type, size);
map = map_sha1_file_internal(sha1, &mapsize);
if (map) {
buf = unpack_sha1_file(map, mapsize, type, size);
munmap(map, mapsize);
return buf;
}
return NULL;
}
void *read_object_with_reference(const unsigned char *sha1,
const char *required_type,
unsigned long *size,
unsigned char *actual_sha1_return)
{
char type[20];
void *buffer;
unsigned long isize;
unsigned char actual_sha1[20];
memcpy(actual_sha1, sha1, 20);
while (1) {
int ref_length = -1;
const char *ref_type = NULL;
buffer = read_sha1_file(actual_sha1, type, &isize);
if (!buffer)
return NULL;
if (!strcmp(type, required_type)) {
*size = isize;
if (actual_sha1_return)
memcpy(actual_sha1_return, actual_sha1, 20);
return buffer;
}
/* Handle references */
else if (!strcmp(type, "commit"))
ref_type = "tree ";
else if (!strcmp(type, "tag"))
ref_type = "object ";
else {
free(buffer);
return NULL;
}
ref_length = strlen(ref_type);
if (memcmp(buffer, ref_type, ref_length) ||
get_sha1_hex(buffer + ref_length, actual_sha1)) {
free(buffer);
return NULL;
}
free(buffer);
/* Now we have the ID of the referred-to object in
* actual_sha1. Check again. */
}
}
char *write_sha1_file_prepare(void *buf,
unsigned long len,
const char *type,
unsigned char *sha1,
unsigned char *hdr,
int *hdrlen)
{
SHA_CTX c;
/* Generate the header */
*hdrlen = sprintf((char *)hdr, "%s %lu", type, len)+1;
/* Sha1.. */
SHA1_Init(&c);
SHA1_Update(&c, hdr, *hdrlen);
SHA1_Update(&c, buf, len);
SHA1_Final(sha1, &c);
return sha1_file_name(sha1);
}
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
/*
* Link the tempfile to the final place, possibly creating the
* last directory level as you do so.
*
* Returns the errno on failure, 0 on success.
*/
static int link_temp_to_file(const char *tmpfile, char *filename)
{
int ret;
if (!link(tmpfile, filename))
return 0;
/*
* Try to mkdir the last path component if that failed
* with an ENOENT.
*
* Re-try the "link()" regardless of whether the mkdir
* succeeds, since a race might mean that somebody
* else succeeded.
*/
ret = errno;
if (ret == ENOENT) {
char *dir = strrchr(filename, '/');
if (dir) {
*dir = 0;
mkdir(filename, 0777);
if (adjust_shared_perm(filename))
return -2;
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
*dir = '/';
if (!link(tmpfile, filename))
return 0;
ret = errno;
}
}
return ret;
}
/*
* Move the just written object into its final resting place
*/
int move_temp_to_file(const char *tmpfile, char *filename)
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
{
int ret = link_temp_to_file(tmpfile, filename);
/*
* Coda hack - coda doesn't like cross-directory links,
* so we fall back to a rename, which will mean that it
* won't be able to check collisions, but that's not a
* big deal.
*
* The same holds for FAT formatted media.
*
* When this succeeds, we just return 0. We have nothing
* left to unlink.
*/
if (ret && ret != EEXIST) {
if (!rename(tmpfile, filename))
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
return 0;
ret = errno;
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
}
unlink(tmpfile);
if (ret) {
if (ret != EEXIST) {
fprintf(stderr, "unable to write sha1 filename %s: %s\n", filename, strerror(ret));
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
return -1;
}
/* FIXME!!! Collision check here ? */
}
return 0;
}
int write_sha1_file(void *buf, unsigned long len, const char *type, unsigned char *returnsha1)
{
int size;
unsigned char *compressed;
z_stream stream;
unsigned char sha1[20];
char *filename;
static char tmpfile[PATH_MAX];
unsigned char hdr[50];
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
int fd, hdrlen;
/* Normally if we have it in the pack then we do not bother writing
* it out into .git/objects/??/?{38} file.
*/
filename = write_sha1_file_prepare(buf, len, type, sha1, hdr, &hdrlen);
if (returnsha1)
memcpy(returnsha1, sha1, 20);
if (has_sha1_file(sha1))
return 0;
fd = open(filename, O_RDONLY);
if (fd >= 0) {
/*
* FIXME!!! We might do collision checking here, but we'd
* need to uncompress the old file and check it. Later.
*/
close(fd);
return 0;
}
if (errno != ENOENT) {
fprintf(stderr, "sha1 file %s: %s\n", filename, strerror(errno));
return -1;
}
snprintf(tmpfile, sizeof(tmpfile), "%s/obj_XXXXXX", get_object_directory());
fd = mkstemp(tmpfile);
if (fd < 0) {
fprintf(stderr, "unable to create temporary sha1 filename %s: %s\n", tmpfile, strerror(errno));
return -1;
}
/* Set it up */
memset(&stream, 0, sizeof(stream));
deflateInit(&stream, Z_BEST_COMPRESSION);
size = deflateBound(&stream, len+hdrlen);
compressed = xmalloc(size);
/* Compress it */
stream.next_out = compressed;
stream.avail_out = size;
/* First header.. */
stream.next_in = hdr;
stream.avail_in = hdrlen;
while (deflate(&stream, 0) == Z_OK)
/* nothing */;
/* Then the data itself.. */
stream.next_in = buf;
stream.avail_in = len;
while (deflate(&stream, Z_FINISH) == Z_OK)
/* nothing */;
deflateEnd(&stream);
size = stream.total_out;
if (write(fd, compressed, size) != size)
die("unable to write file");
fchmod(fd, 0444);
close(fd);
free(compressed);
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
return move_temp_to_file(tmpfile, filename);
}
int write_sha1_to_fd(int fd, const unsigned char *sha1)
{
ssize_t size;
unsigned long objsize;
int posn = 0;
void *map = map_sha1_file_internal(sha1, &objsize);
void *buf = map;
void *temp_obj = NULL;
z_stream stream;
if (!buf) {
unsigned char *unpacked;
unsigned long len;
char type[20];
char hdr[50];
int hdrlen;
// need to unpack and recompress it by itself
unpacked = read_packed_sha1(sha1, type, &len);
hdrlen = sprintf(hdr, "%s %lu", type, len) + 1;
/* Set it up */
memset(&stream, 0, sizeof(stream));
deflateInit(&stream, Z_BEST_COMPRESSION);
size = deflateBound(&stream, len + hdrlen);
temp_obj = buf = xmalloc(size);
/* Compress it */
stream.next_out = buf;
stream.avail_out = size;
/* First header.. */
stream.next_in = (void *)hdr;
stream.avail_in = hdrlen;
while (deflate(&stream, 0) == Z_OK)
/* nothing */;
/* Then the data itself.. */
stream.next_in = unpacked;
stream.avail_in = len;
while (deflate(&stream, Z_FINISH) == Z_OK)
/* nothing */;
deflateEnd(&stream);
free(unpacked);
objsize = stream.total_out;
}
do {
size = write(fd, buf + posn, objsize - posn);
if (size <= 0) {
if (!size) {
fprintf(stderr, "write closed\n");
} else {
perror("write ");
}
return -1;
}
posn += size;
} while (posn < objsize);
if (map)
munmap(map, objsize);
if (temp_obj)
free(temp_obj);
return 0;
}
int write_sha1_from_fd(const unsigned char *sha1, int fd, char *buffer,
size_t bufsize, size_t *bufposn)
{
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
char tmpfile[PATH_MAX];
int local;
z_stream stream;
unsigned char real_sha1[20];
unsigned char discard[4096];
int ret;
SHA_CTX c;
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
snprintf(tmpfile, sizeof(tmpfile), "%s/obj_XXXXXX", get_object_directory());
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
local = mkstemp(tmpfile);
if (local < 0)
return error("Couldn't open %s for %s",
tmpfile, sha1_to_hex(sha1));
memset(&stream, 0, sizeof(stream));
inflateInit(&stream);
SHA1_Init(&c);
do {
ssize_t size;
if (*bufposn) {
stream.avail_in = *bufposn;
stream.next_in = (unsigned char *) buffer;
do {
stream.next_out = discard;
stream.avail_out = sizeof(discard);
ret = inflate(&stream, Z_SYNC_FLUSH);
SHA1_Update(&c, discard, sizeof(discard) -
stream.avail_out);
} while (stream.avail_in && ret == Z_OK);
write(local, buffer, *bufposn - stream.avail_in);
memmove(buffer, buffer + *bufposn - stream.avail_in,
stream.avail_in);
*bufposn = stream.avail_in;
if (ret != Z_OK)
break;
}
size = read(fd, buffer + *bufposn, bufsize - *bufposn);
if (size <= 0) {
close(local);
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
unlink(tmpfile);
if (!size)
return error("Connection closed?");
perror("Reading from connection");
return -1;
}
*bufposn += size;
} while (1);
inflateEnd(&stream);
close(local);
SHA1_Final(real_sha1, &c);
if (ret != Z_STREAM_END) {
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
unlink(tmpfile);
return error("File %s corrupted", sha1_to_hex(sha1));
}
if (memcmp(sha1, real_sha1, 20)) {
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
unlink(tmpfile);
return error("File %s has bad hash", sha1_to_hex(sha1));
}
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
return move_temp_to_file(tmpfile, sha1_file_name(sha1));
}
int has_pack_index(const unsigned char *sha1)
{
struct stat st;
if (stat(sha1_pack_index_name(sha1), &st))
return 0;
return 1;
}
int has_pack_file(const unsigned char *sha1)
{
struct stat st;
if (stat(sha1_pack_name(sha1), &st))
return 0;
return 1;
}
int has_sha1_pack(const unsigned char *sha1)
{
struct pack_entry e;
return find_pack_entry(sha1, &e);
}
int has_sha1_file(const unsigned char *sha1)
{
struct stat st;
struct pack_entry e;
if (find_pack_entry(sha1, &e))
return 1;
return find_sha1_file(sha1, &st) ? 1 : 0;
}
int index_pipe(unsigned char *sha1, int fd, const char *type, int write_object)
{
unsigned long size = 4096;
char *buf = malloc(size);
int iret, ret;
unsigned long off = 0;
unsigned char hdr[50];
int hdrlen;
do {
iret = read(fd, buf + off, size - off);
if (iret > 0) {
off += iret;
if (off == size) {
size *= 2;
buf = realloc(buf, size);
}
}
} while (iret > 0);
if (iret < 0) {
free(buf);
return -1;
}
if (!type)
type = "blob";
if (write_object)
ret = write_sha1_file(buf, off, type, sha1);
else {
write_sha1_file_prepare(buf, off, type, sha1, hdr, &hdrlen);
ret = 0;
}
free(buf);
return ret;
}
int index_fd(unsigned char *sha1, int fd, struct stat *st, int write_object, const char *type)
{
unsigned long size = st->st_size;
void *buf;
int ret;
unsigned char hdr[50];
int hdrlen;
buf = "";
if (size)
buf = mmap(NULL, size, PROT_READ, MAP_PRIVATE, fd, 0);
close(fd);
if (buf == MAP_FAILED)
return -1;
if (!type)
type = "blob";
if (write_object)
ret = write_sha1_file(buf, size, type, sha1);
else {
write_sha1_file_prepare(buf, size, type, sha1, hdr, &hdrlen);
ret = 0;
}
if (size)
munmap(buf, size);
return ret;
}
int index_path(unsigned char *sha1, const char *path, struct stat *st, int write_object)
{
int fd;
char *target;
switch (st->st_mode & S_IFMT) {
case S_IFREG:
fd = open(path, O_RDONLY);
if (fd < 0)
return error("open(\"%s\"): %s", path,
strerror(errno));
if (index_fd(sha1, fd, st, write_object, NULL) < 0)
return error("%s: failed to insert into database",
path);
break;
case S_IFLNK:
target = xmalloc(st->st_size+1);
if (readlink(path, target, st->st_size+1) != st->st_size) {
char *errstr = strerror(errno);
free(target);
return error("readlink(\"%s\"): %s", path,
errstr);
}
if (!write_object) {
unsigned char hdr[50];
int hdrlen;
write_sha1_file_prepare(target, st->st_size, "blob",
sha1, hdr, &hdrlen);
} else if (write_sha1_file(target, st->st_size, "blob", sha1))
return error("%s: failed to insert into database",
path);
free(target);
break;
default:
return error("%s: unsupported file type", path);
}
return 0;
}