git-commit-vandalism/builtin/config.c

972 lines
28 KiB
C
Raw Normal View History

#include "builtin.h"
#include "abspath.h"
#include "alloc.h"
#include "config.h"
#include "color.h"
#include "gettext.h"
#include "ident.h"
#include "parse-options.h"
#include "urlmatch.h"
#include "quote.h"
worktree: add per-worktree config files A new repo extension is added, worktreeConfig. When it is present: - Repository config reading by default includes $GIT_DIR/config _and_ $GIT_DIR/config.worktree. "config" file remains shared in multiple worktree setup. - The special treatment for core.bare and core.worktree, to stay effective only in main worktree, is gone. These config settings are supposed to be in config.worktree. This extension is most useful in multiple worktree setup because you now have an option to store per-worktree config (which is either .git/config.worktree for main worktree, or .git/worktrees/xx/config.worktree for linked ones). This extension can be used in single worktree mode, even though it's pretty much useless (but this can happen after you remove all linked worktrees and move back to single worktree). "git config" reads from both "config" and "config.worktree" by default (i.e. without either --user, --file...) when this extension is present. Default writes still go to "config", not "config.worktree". A new option --worktree is added for that (*). Since a new repo extension is introduced, existing git binaries should refuse to access to the repo (both from main and linked worktrees). So they will not misread the config file (i.e. skip the config.worktree part). They may still accidentally write to the config file anyway if they use with "git config --file <path>". This design places a bet on the assumption that the majority of config variables are shared so it is the default mode. A safer move would be default writes go to per-worktree file, so that accidental changes are isolated. (*) "git config --worktree" points back to "config" file when this extension is not present and there is only one worktree so that it works in any both single and multiple worktree setups. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-21 16:02:28 +02:00
#include "worktree.h"
static const char *const builtin_config_usage[] = {
N_("git config [<options>]"),
NULL
};
static char *key;
static regex_t *key_regexp;
static const char *value_pattern;
static regex_t *regexp;
static int show_keys;
static int omit_values;
static int use_key_regexp;
static int do_all;
static int do_not_match;
static char delim = '=';
static char key_delim = ' ';
static char term = '\n';
static int use_global_config, use_system_config, use_local_config;
worktree: add per-worktree config files A new repo extension is added, worktreeConfig. When it is present: - Repository config reading by default includes $GIT_DIR/config _and_ $GIT_DIR/config.worktree. "config" file remains shared in multiple worktree setup. - The special treatment for core.bare and core.worktree, to stay effective only in main worktree, is gone. These config settings are supposed to be in config.worktree. This extension is most useful in multiple worktree setup because you now have an option to store per-worktree config (which is either .git/config.worktree for main worktree, or .git/worktrees/xx/config.worktree for linked ones). This extension can be used in single worktree mode, even though it's pretty much useless (but this can happen after you remove all linked worktrees and move back to single worktree). "git config" reads from both "config" and "config.worktree" by default (i.e. without either --user, --file...) when this extension is present. Default writes still go to "config", not "config.worktree". A new option --worktree is added for that (*). Since a new repo extension is introduced, existing git binaries should refuse to access to the repo (both from main and linked worktrees). So they will not misread the config file (i.e. skip the config.worktree part). They may still accidentally write to the config file anyway if they use with "git config --file <path>". This design places a bet on the assumption that the majority of config variables are shared so it is the default mode. A safer move would be default writes go to per-worktree file, so that accidental changes are isolated. (*) "git config --worktree" points back to "config" file when this extension is not present and there is only one worktree so that it works in any both single and multiple worktree setups. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-21 16:02:28 +02:00
static int use_worktree_config;
static struct git_config_source given_config_source;
static int actions, type;
builtin/config: introduce `--default` For some use cases, callers of the `git-config(1)` builtin would like to fallback to default values when the variable asked for does not exist. In addition, users would like to use existing type specifiers to ensure that values are parsed correctly when they do exist in the configuration. For example, to fetch a value without a type specifier and fallback to `$fallback`, the following is required: $ git config core.foo || echo "$fallback" This is fine for most values, but can be tricky for difficult-to-express `$fallback`'s, like ANSI color codes. This motivates `--get-color`, which is a one-off exception to the normal type specifier rules wherein a user specifies both the configuration variable and an optional fallback. Both are formatted according to their type specifier, which eases the burden on the user to ensure that values are correctly formatted. This commit (and those following it in this series) aim to eventually replace `--get-color` with a consistent alternative. By introducing `--default`, we allow the `--get-color` action to be promoted to a `--type=color` type specifier, retaining the "fallback" behavior via the `--default` flag introduced in this commit. For example, we aim to replace: $ git config --get-color variable [default] [...] with: $ git config --default default --type=color variable [...] Values filled by `--default` behave exactly as if they were present in the affected configuration file; they will be parsed by type specifiers without the knowledge that they are not themselves present in the configuration. Specifically, this means that the following will work: $ git config --int --default 1M does.not.exist 1048576 In subsequent commits, we will offer `--type=color`, which (in conjunction with `--default`) will be sufficient to replace `--get-color`. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-10 02:18:26 +02:00
static char *default_value;
static int end_nul;
static int respect_includes_opt = -1;
static struct config_options config_options;
static int show_origin;
static int show_scope;
static int fixed_value;
#define ACTION_GET (1<<0)
#define ACTION_GET_ALL (1<<1)
#define ACTION_GET_REGEXP (1<<2)
#define ACTION_REPLACE_ALL (1<<3)
#define ACTION_ADD (1<<4)
#define ACTION_UNSET (1<<5)
#define ACTION_UNSET_ALL (1<<6)
#define ACTION_RENAME_SECTION (1<<7)
#define ACTION_REMOVE_SECTION (1<<8)
#define ACTION_LIST (1<<9)
#define ACTION_EDIT (1<<10)
#define ACTION_SET (1<<11)
#define ACTION_SET_ALL (1<<12)
#define ACTION_GET_COLOR (1<<13)
#define ACTION_GET_COLORBOOL (1<<14)
#define ACTION_GET_URLMATCH (1<<15)
/*
* The actions "ACTION_LIST | ACTION_GET_*" which may produce more than
* one line of output and which should therefore be paged.
*/
#define PAGING_ACTIONS (ACTION_LIST | ACTION_GET_ALL | \
ACTION_GET_REGEXP | ACTION_GET_URLMATCH)
#define TYPE_BOOL 1
#define TYPE_INT 2
#define TYPE_BOOL_OR_INT 3
#define TYPE_PATH 4
#define TYPE_EXPIRY_DATE 5
#define TYPE_COLOR 6
#define TYPE_BOOL_OR_STR 7
#define OPT_CALLBACK_VALUE(s, l, v, h, i) \
{ OPTION_CALLBACK, (s), (l), (v), NULL, (h), PARSE_OPT_NOARG | \
PARSE_OPT_NONEG, option_parse_type, (i) }
static NORETURN void usage_builtin_config(void);
static int option_parse_type(const struct option *opt, const char *arg,
int unset)
{
int new_type, *to_type;
if (unset) {
*((int *) opt->value) = 0;
return 0;
}
/*
* To support '--<type>' style flags, begin with new_type equal to
* opt->defval.
*/
new_type = opt->defval;
if (!new_type) {
if (!strcmp(arg, "bool"))
new_type = TYPE_BOOL;
else if (!strcmp(arg, "int"))
new_type = TYPE_INT;
else if (!strcmp(arg, "bool-or-int"))
new_type = TYPE_BOOL_OR_INT;
else if (!strcmp(arg, "bool-or-str"))
new_type = TYPE_BOOL_OR_STR;
else if (!strcmp(arg, "path"))
new_type = TYPE_PATH;
else if (!strcmp(arg, "expiry-date"))
new_type = TYPE_EXPIRY_DATE;
else if (!strcmp(arg, "color"))
new_type = TYPE_COLOR;
else
die(_("unrecognized --type argument, %s"), arg);
}
to_type = opt->value;
if (*to_type && *to_type != new_type) {
/*
* Complain when there is a new type not equal to the old type.
* This allows for combinations like '--int --type=int' and
* '--type=int --type=int', but disallows ones like '--type=bool
* --int' and '--type=bool
* --type=int'.
*/
error(_("only one type at a time"));
usage_builtin_config();
}
*to_type = new_type;
return 0;
}
static struct option builtin_config_options[] = {
OPT_GROUP(N_("Config file location")),
OPT_BOOL(0, "global", &use_global_config, N_("use global config file")),
OPT_BOOL(0, "system", &use_system_config, N_("use system config file")),
OPT_BOOL(0, "local", &use_local_config, N_("use repository config file")),
worktree: add per-worktree config files A new repo extension is added, worktreeConfig. When it is present: - Repository config reading by default includes $GIT_DIR/config _and_ $GIT_DIR/config.worktree. "config" file remains shared in multiple worktree setup. - The special treatment for core.bare and core.worktree, to stay effective only in main worktree, is gone. These config settings are supposed to be in config.worktree. This extension is most useful in multiple worktree setup because you now have an option to store per-worktree config (which is either .git/config.worktree for main worktree, or .git/worktrees/xx/config.worktree for linked ones). This extension can be used in single worktree mode, even though it's pretty much useless (but this can happen after you remove all linked worktrees and move back to single worktree). "git config" reads from both "config" and "config.worktree" by default (i.e. without either --user, --file...) when this extension is present. Default writes still go to "config", not "config.worktree". A new option --worktree is added for that (*). Since a new repo extension is introduced, existing git binaries should refuse to access to the repo (both from main and linked worktrees). So they will not misread the config file (i.e. skip the config.worktree part). They may still accidentally write to the config file anyway if they use with "git config --file <path>". This design places a bet on the assumption that the majority of config variables are shared so it is the default mode. A safer move would be default writes go to per-worktree file, so that accidental changes are isolated. (*) "git config --worktree" points back to "config" file when this extension is not present and there is only one worktree so that it works in any both single and multiple worktree setups. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-21 16:02:28 +02:00
OPT_BOOL(0, "worktree", &use_worktree_config, N_("use per-worktree config file")),
OPT_STRING('f', "file", &given_config_source.file, N_("file"), N_("use given config file")),
OPT_STRING(0, "blob", &given_config_source.blob, N_("blob-id"), N_("read config from given blob object")),
OPT_GROUP(N_("Action")),
OPT_BIT(0, "get", &actions, N_("get value: name [value-pattern]"), ACTION_GET),
OPT_BIT(0, "get-all", &actions, N_("get all values: key [value-pattern]"), ACTION_GET_ALL),
OPT_BIT(0, "get-regexp", &actions, N_("get values for regexp: name-regex [value-pattern]"), ACTION_GET_REGEXP),
OPT_BIT(0, "get-urlmatch", &actions, N_("get value specific for the URL: section[.var] URL"), ACTION_GET_URLMATCH),
OPT_BIT(0, "replace-all", &actions, N_("replace all matching variables: name value [value-pattern]"), ACTION_REPLACE_ALL),
OPT_BIT(0, "add", &actions, N_("add a new variable: name value"), ACTION_ADD),
OPT_BIT(0, "unset", &actions, N_("remove a variable: name [value-pattern]"), ACTION_UNSET),
OPT_BIT(0, "unset-all", &actions, N_("remove all matches: name [value-pattern]"), ACTION_UNSET_ALL),
OPT_BIT(0, "rename-section", &actions, N_("rename section: old-name new-name"), ACTION_RENAME_SECTION),
OPT_BIT(0, "remove-section", &actions, N_("remove a section: name"), ACTION_REMOVE_SECTION),
OPT_BIT('l', "list", &actions, N_("list all"), ACTION_LIST),
OPT_BOOL(0, "fixed-value", &fixed_value, N_("use string equality when comparing values to 'value-pattern'")),
OPT_BIT('e', "edit", &actions, N_("open an editor"), ACTION_EDIT),
config: fix parsing of "git config --get-color some.key -1" Most of git-config's command line options use OPT_BIT to choose an action, and then parse the non-option arguments in a context-dependent way. However, --get-color and --get-colorbool are unlike the rest of the options, in that they are OPT_STRING, taking the option name as a parameter. This generally works, because we then use the presence of those strings to set an action bit anyway. But it does mean that the option-parser will continue looking for options even after the key (because it is not a non-option; it is an argument to an option). And running: git config --get-color some.key -1 (to use "-1" as the default color spec) will barf, claiming that "-1" is not an option. Instead, we should treat --get-color and --get-colorbool as action bits, just like --add, --get, and all the other actions, and then check that the non-option arguments we got are sane. This fixes the weirdness above, and makes those two options like all the others. This "fixes" a test in t4026, which checked that feeding "-2" as a color should fail (it does fail, but prior to this patch, because parseopt barfed, not because we actually ever tried to parse the color). This also catches other errors, like: git config --get-color some.key black blue which previously silently ignored "blue" (and now will complain that you gave too many arguments). There are some possible regressions, though. We now disallow these, which currently do what you would expect: # specifying other options after the action git config --get-color some.key --file whatever # using long-arg syntax git config --get-color=some.key However, we have never advertised these in the documentation, and in fact they did not work in some older versions of git. The behavior was apparently switched as an accidental side effect of d64ec16 (git config: reorganize to use parseopt, 2009-02-21). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-11-20 16:15:51 +01:00
OPT_BIT(0, "get-color", &actions, N_("find the color configured: slot [default]"), ACTION_GET_COLOR),
OPT_BIT(0, "get-colorbool", &actions, N_("find the color setting: slot [stdout-is-tty]"), ACTION_GET_COLORBOOL),
OPT_GROUP(N_("Type")),
OPT_CALLBACK('t', "type", &type, N_("type"), N_("value is given this type"), option_parse_type),
OPT_CALLBACK_VALUE(0, "bool", &type, N_("value is \"true\" or \"false\""), TYPE_BOOL),
OPT_CALLBACK_VALUE(0, "int", &type, N_("value is decimal number"), TYPE_INT),
OPT_CALLBACK_VALUE(0, "bool-or-int", &type, N_("value is --bool or --int"), TYPE_BOOL_OR_INT),
OPT_CALLBACK_VALUE(0, "bool-or-str", &type, N_("value is --bool or string"), TYPE_BOOL_OR_STR),
OPT_CALLBACK_VALUE(0, "path", &type, N_("value is a path (file or directory name)"), TYPE_PATH),
OPT_CALLBACK_VALUE(0, "expiry-date", &type, N_("value is an expiry date"), TYPE_EXPIRY_DATE),
OPT_GROUP(N_("Other")),
OPT_BOOL('z', "null", &end_nul, N_("terminate values with NUL byte")),
OPT_BOOL(0, "name-only", &omit_values, N_("show variable names only")),
OPT_BOOL(0, "includes", &respect_includes_opt, N_("respect include directives on lookup")),
OPT_BOOL(0, "show-origin", &show_origin, N_("show origin of config (file, standard input, blob, command line)")),
OPT_BOOL(0, "show-scope", &show_scope, N_("show scope of config (worktree, local, global, system, command)")),
builtin/config: introduce `--default` For some use cases, callers of the `git-config(1)` builtin would like to fallback to default values when the variable asked for does not exist. In addition, users would like to use existing type specifiers to ensure that values are parsed correctly when they do exist in the configuration. For example, to fetch a value without a type specifier and fallback to `$fallback`, the following is required: $ git config core.foo || echo "$fallback" This is fine for most values, but can be tricky for difficult-to-express `$fallback`'s, like ANSI color codes. This motivates `--get-color`, which is a one-off exception to the normal type specifier rules wherein a user specifies both the configuration variable and an optional fallback. Both are formatted according to their type specifier, which eases the burden on the user to ensure that values are correctly formatted. This commit (and those following it in this series) aim to eventually replace `--get-color` with a consistent alternative. By introducing `--default`, we allow the `--get-color` action to be promoted to a `--type=color` type specifier, retaining the "fallback" behavior via the `--default` flag introduced in this commit. For example, we aim to replace: $ git config --get-color variable [default] [...] with: $ git config --default default --type=color variable [...] Values filled by `--default` behave exactly as if they were present in the affected configuration file; they will be parsed by type specifiers without the knowledge that they are not themselves present in the configuration. Specifically, this means that the following will work: $ git config --int --default 1M does.not.exist 1048576 In subsequent commits, we will offer `--type=color`, which (in conjunction with `--default`) will be sufficient to replace `--get-color`. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-10 02:18:26 +02:00
OPT_STRING(0, "default", &default_value, N_("value"), N_("with --get, use default value when missing entry")),
OPT_END(),
};
static NORETURN void usage_builtin_config(void)
{
usage_with_options(builtin_config_usage, builtin_config_options);
}
static void check_argc(int argc, int min, int max)
{
if (argc >= min && argc <= max)
return;
if (min == max)
error(_("wrong number of arguments, should be %d"), min);
else
error(_("wrong number of arguments, should be from %d to %d"),
min, max);
usage_builtin_config();
}
static void show_config_origin(struct strbuf *buf)
{
const char term = end_nul ? '\0' : '\t';
strbuf_addstr(buf, current_config_origin_type());
strbuf_addch(buf, ':');
if (end_nul)
strbuf_addstr(buf, current_config_name());
else
quote_c_style(current_config_name(), buf, NULL, 0);
strbuf_addch(buf, term);
}
static void show_config_scope(struct strbuf *buf)
{
const char term = end_nul ? '\0' : '\t';
const char *scope = config_scope_name(current_config_scope());
strbuf_addstr(buf, N_(scope));
strbuf_addch(buf, term);
}
static int show_all_config(const char *key_, const char *value_,
void *cb UNUSED)
{
if (show_origin || show_scope) {
struct strbuf buf = STRBUF_INIT;
if (show_scope)
show_config_scope(&buf);
if (show_origin)
show_config_origin(&buf);
/* Use fwrite as "buf" can contain \0's if "end_null" is set. */
fwrite(buf.buf, 1, buf.len, stdout);
strbuf_release(&buf);
}
if (!omit_values && value_)
printf("%s%c%s%c", key_, delim, value_, term);
else
printf("%s%c", key_, term);
return 0;
}
struct strbuf_list {
struct strbuf *items;
int nr;
int alloc;
};
static int format_config(struct strbuf *buf, const char *key_, const char *value_)
{
if (show_scope)
show_config_scope(buf);
if (show_origin)
show_config_origin(buf);
if (show_keys)
strbuf_addstr(buf, key_);
if (!omit_values) {
if (show_keys)
strbuf_addch(buf, key_delim);
if (type == TYPE_INT)
strbuf_addf(buf, "%"PRId64,
git_config_int64(key_, value_ ? value_ : ""));
else if (type == TYPE_BOOL)
strbuf_addstr(buf, git_config_bool(key_, value_) ?
"true" : "false");
else if (type == TYPE_BOOL_OR_INT) {
int is_bool, v;
v = git_config_bool_or_int(key_, value_, &is_bool);
if (is_bool)
strbuf_addstr(buf, v ? "true" : "false");
else
strbuf_addf(buf, "%d", v);
} else if (type == TYPE_BOOL_OR_STR) {
int v = git_parse_maybe_bool(value_);
if (v < 0)
strbuf_addstr(buf, value_);
else
strbuf_addstr(buf, v ? "true" : "false");
} else if (type == TYPE_PATH) {
const char *v;
if (git_config_pathname(&v, key_, value_) < 0)
return -1;
strbuf_addstr(buf, v);
free((char *)v);
} else if (type == TYPE_EXPIRY_DATE) {
timestamp_t t;
if (git_config_expiry_date(&t, key_, value_) < 0)
return -1;
strbuf_addf(buf, "%"PRItime, t);
} else if (type == TYPE_COLOR) {
char v[COLOR_MAXLEN];
if (git_config_color(v, key_, value_) < 0)
return -1;
strbuf_addstr(buf, v);
} else if (value_) {
strbuf_addstr(buf, value_);
} else {
/* Just show the key name; back out delimiter */
if (show_keys)
strbuf_setlen(buf, buf->len - 1);
}
}
git-config: do not complain about duplicate entries If git-config is asked for a single value, it will complain and exit with an error if it finds multiple instances of that value. This is unlike the usual internal config parsing, however, which will generally overwrite previous values, leaving only the final one. For example: [set a multivar] $ git config user.email one@example.com $ git config --add user.email two@example.com [use the internal parser to fetch it] $ git var GIT_AUTHOR_IDENT Your Name <two@example.com> ... [use git-config to fetch it] $ git config user.email one@example.com error: More than one value for the key user.email: two@example.com This overwriting behavior is critical for the regular parser, which starts with the lowest-priority file (e.g., /etc/gitconfig) and proceeds to the highest-priority file ($GIT_DIR/config). Overwriting yields the highest priority value at the end. Git-config solves this problem by implementing its own parsing. It goes from highest to lowest priorty, but does not proceed to the next file if it has seen a value. So in practice, this distinction never mattered much, because it only triggered for values in the same file. And there was not much point in doing that; the real value is in overwriting values from lower-priority files. However, this changed with the implementation of config include files. Now we might see an include overriding a value from the parent file, which is a sensible thing to do, but git-config will flag as a duplication. This patch drops the duplicate detection for git-config and switches to a pure-overwrite model (for the single case; --get-all can still be used if callers want to do something more fancy). As is shown by the modifications to the test suite, this is a user-visible change in behavior. An alternative would be to just change the include case, but this is much cleaner for a few reasons: 1. If you change the include case, then to what? If you just stop parsing includes after getting a value, then you will get a _different_ answer than the regular config parser (you'll get the first value instead of the last value). So you'd want to implement overwrite semantics anyway. 2. Even though it is a change in behavior for git-config, it is bringing us in line with what the internal parsers already do. 3. The file-order reimplementation is the only thing keeping us from sharing more code with the internal config parser, which will help keep differences to a minimum. Going under the assumption that the primary purpose of git-config is to behave identically to how git's internal parsing works, this change can be seen as a bug-fix. Signed-off-by: Jeff King <peff@peff.net>
2012-10-23 22:52:44 +02:00
strbuf_addch(buf, term);
return 0;
}
static int collect_config(const char *key_, const char *value_, void *cb)
{
struct strbuf_list *values = cb;
if (!use_key_regexp && strcmp(key_, key))
return 0;
if (use_key_regexp && regexec(key_regexp, key_, 0, NULL, 0))
return 0;
if (fixed_value && strcmp(value_pattern, (value_?value_:"")))
return 0;
if (regexp != NULL &&
(do_not_match ^ !!regexec(regexp, (value_?value_:""), 0, NULL, 0)))
return 0;
ALLOC_GROW(values->items, values->nr + 1, values->alloc);
strbuf_init(&values->items[values->nr], 0);
return format_config(&values->items[values->nr++], key_, value_);
}
static int get_value(const char *key_, const char *regex_, unsigned flags)
{
int ret = CONFIG_GENERIC_ERROR;
struct strbuf_list values = {NULL};
int i;
if (use_key_regexp) {
char *tl;
/*
* NEEDSWORK: this naive pattern lowercasing obviously does not
* work for more complex patterns like "^[^.]*Foo.*bar".
* Perhaps we should deprecate this altogether someday.
*/
key = xstrdup(key_);
for (tl = key + strlen(key) - 1;
tl >= key && *tl != '.';
tl--)
*tl = tolower(*tl);
for (tl = key; *tl && *tl != '.'; tl++)
*tl = tolower(*tl);
key_regexp = (regex_t*)xmalloc(sizeof(regex_t));
if (regcomp(key_regexp, key, REG_EXTENDED)) {
error(_("invalid key pattern: %s"), key_);
FREE_AND_NULL(key_regexp);
ret = CONFIG_INVALID_PATTERN;
goto free_strings;
}
} else {
if (git_config_parse_key(key_, &key, NULL)) {
ret = CONFIG_INVALID_KEY;
goto free_strings;
}
}
if (regex_ && (flags & CONFIG_FLAGS_FIXED_VALUE))
value_pattern = regex_;
else if (regex_) {
if (regex_[0] == '!') {
do_not_match = 1;
regex_++;
}
regexp = (regex_t*)xmalloc(sizeof(regex_t));
if (regcomp(regexp, regex_, REG_EXTENDED)) {
error(_("invalid pattern: %s"), regex_);
FREE_AND_NULL(regexp);
ret = CONFIG_INVALID_PATTERN;
goto free_strings;
}
}
config_with_options(collect_config, &values,
&given_config_source, &config_options);
builtin/config: introduce `--default` For some use cases, callers of the `git-config(1)` builtin would like to fallback to default values when the variable asked for does not exist. In addition, users would like to use existing type specifiers to ensure that values are parsed correctly when they do exist in the configuration. For example, to fetch a value without a type specifier and fallback to `$fallback`, the following is required: $ git config core.foo || echo "$fallback" This is fine for most values, but can be tricky for difficult-to-express `$fallback`'s, like ANSI color codes. This motivates `--get-color`, which is a one-off exception to the normal type specifier rules wherein a user specifies both the configuration variable and an optional fallback. Both are formatted according to their type specifier, which eases the burden on the user to ensure that values are correctly formatted. This commit (and those following it in this series) aim to eventually replace `--get-color` with a consistent alternative. By introducing `--default`, we allow the `--get-color` action to be promoted to a `--type=color` type specifier, retaining the "fallback" behavior via the `--default` flag introduced in this commit. For example, we aim to replace: $ git config --get-color variable [default] [...] with: $ git config --default default --type=color variable [...] Values filled by `--default` behave exactly as if they were present in the affected configuration file; they will be parsed by type specifiers without the knowledge that they are not themselves present in the configuration. Specifically, this means that the following will work: $ git config --int --default 1M does.not.exist 1048576 In subsequent commits, we will offer `--type=color`, which (in conjunction with `--default`) will be sufficient to replace `--get-color`. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-10 02:18:26 +02:00
if (!values.nr && default_value) {
struct strbuf *item;
ALLOC_GROW(values.items, values.nr + 1, values.alloc);
item = &values.items[values.nr++];
strbuf_init(item, 0);
if (format_config(item, key_, default_value) < 0)
die(_("failed to format default config value: %s"),
default_value);
}
git-config: do not complain about duplicate entries If git-config is asked for a single value, it will complain and exit with an error if it finds multiple instances of that value. This is unlike the usual internal config parsing, however, which will generally overwrite previous values, leaving only the final one. For example: [set a multivar] $ git config user.email one@example.com $ git config --add user.email two@example.com [use the internal parser to fetch it] $ git var GIT_AUTHOR_IDENT Your Name <two@example.com> ... [use git-config to fetch it] $ git config user.email one@example.com error: More than one value for the key user.email: two@example.com This overwriting behavior is critical for the regular parser, which starts with the lowest-priority file (e.g., /etc/gitconfig) and proceeds to the highest-priority file ($GIT_DIR/config). Overwriting yields the highest priority value at the end. Git-config solves this problem by implementing its own parsing. It goes from highest to lowest priorty, but does not proceed to the next file if it has seen a value. So in practice, this distinction never mattered much, because it only triggered for values in the same file. And there was not much point in doing that; the real value is in overwriting values from lower-priority files. However, this changed with the implementation of config include files. Now we might see an include overriding a value from the parent file, which is a sensible thing to do, but git-config will flag as a duplication. This patch drops the duplicate detection for git-config and switches to a pure-overwrite model (for the single case; --get-all can still be used if callers want to do something more fancy). As is shown by the modifications to the test suite, this is a user-visible change in behavior. An alternative would be to just change the include case, but this is much cleaner for a few reasons: 1. If you change the include case, then to what? If you just stop parsing includes after getting a value, then you will get a _different_ answer than the regular config parser (you'll get the first value instead of the last value). So you'd want to implement overwrite semantics anyway. 2. Even though it is a change in behavior for git-config, it is bringing us in line with what the internal parsers already do. 3. The file-order reimplementation is the only thing keeping us from sharing more code with the internal config parser, which will help keep differences to a minimum. Going under the assumption that the primary purpose of git-config is to behave identically to how git's internal parsing works, this change can be seen as a bug-fix. Signed-off-by: Jeff King <peff@peff.net>
2012-10-23 22:52:44 +02:00
ret = !values.nr;
config: add include directive It can be useful to split your ~/.gitconfig across multiple files. For example, you might have a "main" file which is used on many machines, but a small set of per-machine tweaks. Or you may want to make some of your config public (e.g., clever aliases) while keeping other data back (e.g., your name or other identifying information). Or you may want to include a number of config options in some subset of your repos without copying and pasting (e.g., you want to reference them from the .git/config of participating repos). This patch introduces an include directive for config files. It looks like: [include] path = /path/to/file This is syntactically backwards-compatible with existing git config parsers (i.e., they will see it as another config entry and ignore it unless you are looking up include.path). The implementation provides a "git_config_include" callback which wraps regular config callbacks. Callers can pass it to git_config_from_file, and it will transparently follow any include directives, passing all of the discovered options to the real callback. Include directives are turned on automatically for "regular" git config parsing. This includes calls to git_config, as well as calls to the "git config" program that do not specify a single file (e.g., using "-f", "--global", etc). They are not turned on in other cases, including: 1. Parsing of other config-like files, like .gitmodules. There isn't a real need, and I'd rather be conservative and avoid unnecessary incompatibility or confusion. 2. Reading single files via "git config". This is for two reasons: a. backwards compatibility with scripts looking at config-like files. b. inspection of a specific file probably means you care about just what's in that file, not a general lookup for "do we have this value anywhere at all". If that is not the case, the caller can always specify "--includes". 3. Writing files via "git config"; we want to treat include.* variables as literal items to be copied (or modified), and not expand them. So "git config --unset-all foo.bar" would operate _only_ on .git/config, not any of its included files (just as it also does not operate on ~/.gitconfig). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-06 10:54:04 +01:00
for (i = 0; i < values.nr; i++) {
struct strbuf *buf = values.items + i;
git-config: do not complain about duplicate entries If git-config is asked for a single value, it will complain and exit with an error if it finds multiple instances of that value. This is unlike the usual internal config parsing, however, which will generally overwrite previous values, leaving only the final one. For example: [set a multivar] $ git config user.email one@example.com $ git config --add user.email two@example.com [use the internal parser to fetch it] $ git var GIT_AUTHOR_IDENT Your Name <two@example.com> ... [use git-config to fetch it] $ git config user.email one@example.com error: More than one value for the key user.email: two@example.com This overwriting behavior is critical for the regular parser, which starts with the lowest-priority file (e.g., /etc/gitconfig) and proceeds to the highest-priority file ($GIT_DIR/config). Overwriting yields the highest priority value at the end. Git-config solves this problem by implementing its own parsing. It goes from highest to lowest priorty, but does not proceed to the next file if it has seen a value. So in practice, this distinction never mattered much, because it only triggered for values in the same file. And there was not much point in doing that; the real value is in overwriting values from lower-priority files. However, this changed with the implementation of config include files. Now we might see an include overriding a value from the parent file, which is a sensible thing to do, but git-config will flag as a duplication. This patch drops the duplicate detection for git-config and switches to a pure-overwrite model (for the single case; --get-all can still be used if callers want to do something more fancy). As is shown by the modifications to the test suite, this is a user-visible change in behavior. An alternative would be to just change the include case, but this is much cleaner for a few reasons: 1. If you change the include case, then to what? If you just stop parsing includes after getting a value, then you will get a _different_ answer than the regular config parser (you'll get the first value instead of the last value). So you'd want to implement overwrite semantics anyway. 2. Even though it is a change in behavior for git-config, it is bringing us in line with what the internal parsers already do. 3. The file-order reimplementation is the only thing keeping us from sharing more code with the internal config parser, which will help keep differences to a minimum. Going under the assumption that the primary purpose of git-config is to behave identically to how git's internal parsing works, this change can be seen as a bug-fix. Signed-off-by: Jeff King <peff@peff.net>
2012-10-23 22:52:44 +02:00
if (do_all || i == values.nr - 1)
fwrite(buf->buf, 1, buf->len, stdout);
strbuf_release(buf);
}
free(values.items);
free_strings:
free(key);
if (key_regexp) {
regfree(key_regexp);
free(key_regexp);
}
if (regexp) {
regfree(regexp);
free(regexp);
}
return ret;
}
static char *normalize_value(const char *key, const char *value)
{
if (!value)
return NULL;
if (type == 0 || type == TYPE_PATH || type == TYPE_EXPIRY_DATE)
/*
* We don't do normalization for TYPE_PATH here: If
* the path is like ~/foobar/, we prefer to store
* "~/foobar/" in the config file, and to expand the ~
* when retrieving the value.
* Also don't do normalization for expiry dates.
*/
return xstrdup(value);
if (type == TYPE_INT)
return xstrfmt("%"PRId64, git_config_int64(key, value));
if (type == TYPE_BOOL)
return xstrdup(git_config_bool(key, value) ? "true" : "false");
if (type == TYPE_BOOL_OR_INT) {
int is_bool, v;
v = git_config_bool_or_int(key, value, &is_bool);
if (!is_bool)
return xstrfmt("%d", v);
else
return xstrdup(v ? "true" : "false");
}
if (type == TYPE_BOOL_OR_STR) {
int v = git_parse_maybe_bool(value);
if (v < 0)
return xstrdup(value);
else
return xstrdup(v ? "true" : "false");
}
if (type == TYPE_COLOR) {
char v[COLOR_MAXLEN];
if (git_config_color(v, key, value))
die(_("cannot parse color '%s'"), value);
/*
* The contents of `v` now contain an ANSI escape
* sequence, not suitable for including within a
* configuration file. Treat the above as a
* "sanity-check", and return the given value, which we
* know is representable as valid color code.
*/
return xstrdup(value);
}
BUG("cannot normalize type %d", type);
}
static int get_color_found;
static const char *get_color_slot;
static const char *get_colorbool_slot;
static char parsed_color[COLOR_MAXLEN];
static int git_get_color_config(const char *var, const char *value,
void *cb UNUSED)
{
if (!strcmp(var, get_color_slot)) {
if (!value)
config_error_nonbool(var);
if (color_parse(value, parsed_color) < 0)
return -1;
get_color_found = 1;
}
return 0;
}
config: fix parsing of "git config --get-color some.key -1" Most of git-config's command line options use OPT_BIT to choose an action, and then parse the non-option arguments in a context-dependent way. However, --get-color and --get-colorbool are unlike the rest of the options, in that they are OPT_STRING, taking the option name as a parameter. This generally works, because we then use the presence of those strings to set an action bit anyway. But it does mean that the option-parser will continue looking for options even after the key (because it is not a non-option; it is an argument to an option). And running: git config --get-color some.key -1 (to use "-1" as the default color spec) will barf, claiming that "-1" is not an option. Instead, we should treat --get-color and --get-colorbool as action bits, just like --add, --get, and all the other actions, and then check that the non-option arguments we got are sane. This fixes the weirdness above, and makes those two options like all the others. This "fixes" a test in t4026, which checked that feeding "-2" as a color should fail (it does fail, but prior to this patch, because parseopt barfed, not because we actually ever tried to parse the color). This also catches other errors, like: git config --get-color some.key black blue which previously silently ignored "blue" (and now will complain that you gave too many arguments). There are some possible regressions, though. We now disallow these, which currently do what you would expect: # specifying other options after the action git config --get-color some.key --file whatever # using long-arg syntax git config --get-color=some.key However, we have never advertised these in the documentation, and in fact they did not work in some older versions of git. The behavior was apparently switched as an accidental side effect of d64ec16 (git config: reorganize to use parseopt, 2009-02-21). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-11-20 16:15:51 +01:00
static void get_color(const char *var, const char *def_color)
{
config: fix parsing of "git config --get-color some.key -1" Most of git-config's command line options use OPT_BIT to choose an action, and then parse the non-option arguments in a context-dependent way. However, --get-color and --get-colorbool are unlike the rest of the options, in that they are OPT_STRING, taking the option name as a parameter. This generally works, because we then use the presence of those strings to set an action bit anyway. But it does mean that the option-parser will continue looking for options even after the key (because it is not a non-option; it is an argument to an option). And running: git config --get-color some.key -1 (to use "-1" as the default color spec) will barf, claiming that "-1" is not an option. Instead, we should treat --get-color and --get-colorbool as action bits, just like --add, --get, and all the other actions, and then check that the non-option arguments we got are sane. This fixes the weirdness above, and makes those two options like all the others. This "fixes" a test in t4026, which checked that feeding "-2" as a color should fail (it does fail, but prior to this patch, because parseopt barfed, not because we actually ever tried to parse the color). This also catches other errors, like: git config --get-color some.key black blue which previously silently ignored "blue" (and now will complain that you gave too many arguments). There are some possible regressions, though. We now disallow these, which currently do what you would expect: # specifying other options after the action git config --get-color some.key --file whatever # using long-arg syntax git config --get-color=some.key However, we have never advertised these in the documentation, and in fact they did not work in some older versions of git. The behavior was apparently switched as an accidental side effect of d64ec16 (git config: reorganize to use parseopt, 2009-02-21). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-11-20 16:15:51 +01:00
get_color_slot = var;
get_color_found = 0;
parsed_color[0] = '\0';
config_with_options(git_get_color_config, NULL,
&given_config_source, &config_options);
if (!get_color_found && def_color) {
if (color_parse(def_color, parsed_color) < 0)
die(_("unable to parse default color value"));
}
fputs(parsed_color, stdout);
}
static int get_colorbool_found;
static int get_diff_color_found;
static int get_color_ui_found;
static int git_get_colorbool_config(const char *var, const char *value,
void *data UNUSED)
{
if (!strcmp(var, get_colorbool_slot))
get_colorbool_found = git_config_colorbool(var, value);
else if (!strcmp(var, "diff.color"))
get_diff_color_found = git_config_colorbool(var, value);
else if (!strcmp(var, "color.ui"))
get_color_ui_found = git_config_colorbool(var, value);
return 0;
}
config: fix parsing of "git config --get-color some.key -1" Most of git-config's command line options use OPT_BIT to choose an action, and then parse the non-option arguments in a context-dependent way. However, --get-color and --get-colorbool are unlike the rest of the options, in that they are OPT_STRING, taking the option name as a parameter. This generally works, because we then use the presence of those strings to set an action bit anyway. But it does mean that the option-parser will continue looking for options even after the key (because it is not a non-option; it is an argument to an option). And running: git config --get-color some.key -1 (to use "-1" as the default color spec) will barf, claiming that "-1" is not an option. Instead, we should treat --get-color and --get-colorbool as action bits, just like --add, --get, and all the other actions, and then check that the non-option arguments we got are sane. This fixes the weirdness above, and makes those two options like all the others. This "fixes" a test in t4026, which checked that feeding "-2" as a color should fail (it does fail, but prior to this patch, because parseopt barfed, not because we actually ever tried to parse the color). This also catches other errors, like: git config --get-color some.key black blue which previously silently ignored "blue" (and now will complain that you gave too many arguments). There are some possible regressions, though. We now disallow these, which currently do what you would expect: # specifying other options after the action git config --get-color some.key --file whatever # using long-arg syntax git config --get-color=some.key However, we have never advertised these in the documentation, and in fact they did not work in some older versions of git. The behavior was apparently switched as an accidental side effect of d64ec16 (git config: reorganize to use parseopt, 2009-02-21). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-11-20 16:15:51 +01:00
static int get_colorbool(const char *var, int print)
{
config: fix parsing of "git config --get-color some.key -1" Most of git-config's command line options use OPT_BIT to choose an action, and then parse the non-option arguments in a context-dependent way. However, --get-color and --get-colorbool are unlike the rest of the options, in that they are OPT_STRING, taking the option name as a parameter. This generally works, because we then use the presence of those strings to set an action bit anyway. But it does mean that the option-parser will continue looking for options even after the key (because it is not a non-option; it is an argument to an option). And running: git config --get-color some.key -1 (to use "-1" as the default color spec) will barf, claiming that "-1" is not an option. Instead, we should treat --get-color and --get-colorbool as action bits, just like --add, --get, and all the other actions, and then check that the non-option arguments we got are sane. This fixes the weirdness above, and makes those two options like all the others. This "fixes" a test in t4026, which checked that feeding "-2" as a color should fail (it does fail, but prior to this patch, because parseopt barfed, not because we actually ever tried to parse the color). This also catches other errors, like: git config --get-color some.key black blue which previously silently ignored "blue" (and now will complain that you gave too many arguments). There are some possible regressions, though. We now disallow these, which currently do what you would expect: # specifying other options after the action git config --get-color some.key --file whatever # using long-arg syntax git config --get-color=some.key However, we have never advertised these in the documentation, and in fact they did not work in some older versions of git. The behavior was apparently switched as an accidental side effect of d64ec16 (git config: reorganize to use parseopt, 2009-02-21). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-11-20 16:15:51 +01:00
get_colorbool_slot = var;
get_colorbool_found = -1;
get_diff_color_found = -1;
get_color_ui_found = -1;
config_with_options(git_get_colorbool_config, NULL,
&given_config_source, &config_options);
if (get_colorbool_found < 0) {
if (!strcmp(get_colorbool_slot, "color.diff"))
get_colorbool_found = get_diff_color_found;
if (get_colorbool_found < 0)
get_colorbool_found = get_color_ui_found;
}
if (get_colorbool_found < 0)
/* default value if none found in config */
get_colorbool_found = GIT_COLOR_AUTO;
color: delay auto-color decision until point of use When we read a color value either from a config file or from the command line, we use git_config_colorbool to convert it from the tristate always/never/auto into a single yes/no boolean value. This has some timing implications with respect to starting a pager. If we start (or decide not to start) the pager before checking the colorbool, everything is fine. Either isatty(1) will give us the right information, or we will properly check for pager_in_use(). However, if we decide to start a pager after we have checked the colorbool, things are not so simple. If stdout is a tty, then we will have already decided to use color. However, the user may also have configured color.pager not to use color with the pager. In this case, we need to actually turn off color. Unfortunately, the pager code has no idea which color variables were turned on (and there are many of them throughout the code, and they may even have been manipulated after the colorbool selection by something like "--color" on the command line). This bug can be seen any time a pager is started after config and command line options are checked. This has affected "git diff" since 89d07f7 (diff: don't run pager if user asked for a diff style exit code, 2007-08-12). It has also affect the log family since 1fda91b (Fix 'git log' early pager startup error case, 2010-08-24). This patch splits the notion of parsing a colorbool and actually checking the configuration. The "use_color" variables now have an additional possible value, GIT_COLOR_AUTO. Users of the variable should use the new "want_color()" wrapper, which will lazily determine and cache the auto-color decision. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18 07:04:23 +02:00
get_colorbool_found = want_color(get_colorbool_found);
if (print) {
printf("%s\n", get_colorbool_found ? "true" : "false");
return 0;
} else
return get_colorbool_found ? 0 : 1;
}
static void check_write(void)
{
if (!given_config_source.file && !startup_info->have_repository)
die(_("not in a git directory"));
if (given_config_source.use_stdin)
die(_("writing to stdin is not supported"));
if (given_config_source.blob)
die(_("writing config blobs is not supported"));
}
struct urlmatch_current_candidate_value {
char value_is_null;
struct strbuf value;
};
static int urlmatch_collect_fn(const char *var, const char *value, void *cb)
{
struct string_list *values = cb;
struct string_list_item *item = string_list_insert(values, var);
struct urlmatch_current_candidate_value *matched = item->util;
if (!matched) {
matched = xmalloc(sizeof(*matched));
strbuf_init(&matched->value, 0);
item->util = matched;
} else {
strbuf_reset(&matched->value);
}
if (value) {
strbuf_addstr(&matched->value, value);
matched->value_is_null = 0;
} else {
matched->value_is_null = 1;
}
return 0;
}
static int get_urlmatch(const char *var, const char *url)
{
int ret;
char *section_tail;
struct string_list_item *item;
struct urlmatch_config config = URLMATCH_CONFIG_INIT;
struct string_list values = STRING_LIST_INIT_DUP;
config.collect_fn = urlmatch_collect_fn;
config.cascade_fn = NULL;
config.cb = &values;
if (!url_normalize(url, &config.url))
die("%s", config.url.err);
config.section = xstrdup_tolower(var);
section_tail = strchr(config.section, '.');
if (section_tail) {
*section_tail = '\0';
config.key = section_tail + 1;
show_keys = 0;
} else {
config.key = NULL;
show_keys = 1;
}
config_with_options(urlmatch_config_entry, &config,
&given_config_source, &config_options);
ret = !values.nr;
for_each_string_list_item(item, &values) {
struct urlmatch_current_candidate_value *matched = item->util;
struct strbuf buf = STRBUF_INIT;
format_config(&buf, item->string,
matched->value_is_null ? NULL : matched->value.buf);
fwrite(buf.buf, 1, buf.len, stdout);
strbuf_release(&buf);
strbuf_release(&matched->value);
}
urlmatch_config_release(&config);
string_list_clear(&values, 1);
free(config.url.url);
free((void *)config.section);
return ret;
}
static char *default_user_config(void)
{
struct strbuf buf = STRBUF_INIT;
strbuf_addf(&buf,
_("# This is Git's per-user configuration file.\n"
"[user]\n"
"# Please adapt and uncomment the following lines:\n"
"# name = %s\n"
"# email = %s\n"),
ident_default_name(),
ident_default_email());
return strbuf_detach(&buf, NULL);
}
int cmd_config(int argc, const char **argv, const char *prefix)
{
int nongit = !startup_info->have_repository;
built-ins: use free() not UNLEAK() if trivial, rm dead code For a lot of uses of UNLEAK() it would be quite tricky to release the memory involved, or we're missing the relevant *_(release|clear)() functions. But in these cases we have them already, and can just invoke them on the variable(s) involved, instead of UNLEAK(). For "builtin/worktree.c" the UNLEAK() was also added in [1], but the struct member it's unleaking was removed in [2]. The only non-"int" member of that structure is "const char *keep_locked", which comes to us via "argv" or a string literal[3]. We have good visibility via the compiler and tooling (e.g. SANITIZE=address) on bad free()-ing, but none on UNLEAK() we don't need anymore. So let's prefer releasing the memory when it's easy. For "bugreport", "worktree" and "config" we need to start using a "ret = ..." return pattern. For "builtin/bugreport.c" these UNLEAK() were added in [4], and for "builtin/config.c" in [1]. For "config" the code seen here was the only user of the "value" variable. For "ACTION_{RENAME,REMOVE}_SECTION" we need to be sure to return the right exit code in the cases where we were relying on falling through to the top-level. I think there's still a use-case for UNLEAK(), but hat it's changed since then. Using it so that "we can see the real leaks" is counter-productive in these cases. It's more useful to have UNLEAK() be a marker of the remaining odd cases where it's hard to free() the memory for whatever reason. With this change less than 20 of them remain in-tree. 1. 0e5bba53af7 (add UNLEAK annotation for reducing leak false positives, 2017-09-08) 2. d861d34a6ed (worktree: remove extra members from struct add_opts, 2018-04-24) 3. 0db4961c49b (worktree: teach `add` to accept --reason <string> with --lock, 2021-07-15) 4. 0e5bba53af7 and 00d8c311050 (commit: fix "author_ident" leak, 2022-05-12). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Taylor Blau <me@ttaylorr.com>
2022-11-08 19:17:51 +01:00
char *value = NULL;
int flags = 0;
built-ins: use free() not UNLEAK() if trivial, rm dead code For a lot of uses of UNLEAK() it would be quite tricky to release the memory involved, or we're missing the relevant *_(release|clear)() functions. But in these cases we have them already, and can just invoke them on the variable(s) involved, instead of UNLEAK(). For "builtin/worktree.c" the UNLEAK() was also added in [1], but the struct member it's unleaking was removed in [2]. The only non-"int" member of that structure is "const char *keep_locked", which comes to us via "argv" or a string literal[3]. We have good visibility via the compiler and tooling (e.g. SANITIZE=address) on bad free()-ing, but none on UNLEAK() we don't need anymore. So let's prefer releasing the memory when it's easy. For "bugreport", "worktree" and "config" we need to start using a "ret = ..." return pattern. For "builtin/bugreport.c" these UNLEAK() were added in [4], and for "builtin/config.c" in [1]. For "config" the code seen here was the only user of the "value" variable. For "ACTION_{RENAME,REMOVE}_SECTION" we need to be sure to return the right exit code in the cases where we were relying on falling through to the top-level. I think there's still a use-case for UNLEAK(), but hat it's changed since then. Using it so that "we can see the real leaks" is counter-productive in these cases. It's more useful to have UNLEAK() be a marker of the remaining odd cases where it's hard to free() the memory for whatever reason. With this change less than 20 of them remain in-tree. 1. 0e5bba53af7 (add UNLEAK annotation for reducing leak false positives, 2017-09-08) 2. d861d34a6ed (worktree: remove extra members from struct add_opts, 2018-04-24) 3. 0db4961c49b (worktree: teach `add` to accept --reason <string> with --lock, 2021-07-15) 4. 0e5bba53af7 and 00d8c311050 (commit: fix "author_ident" leak, 2022-05-12). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Taylor Blau <me@ttaylorr.com>
2022-11-08 19:17:51 +01:00
int ret = 0;
given_config_source.file = xstrdup_or_null(getenv(CONFIG_ENVIRONMENT));
argc = parse_options(argc, argv, prefix, builtin_config_options,
builtin_config_usage,
PARSE_OPT_STOP_AT_NON_OPTION);
if (use_global_config + use_system_config + use_local_config +
worktree: add per-worktree config files A new repo extension is added, worktreeConfig. When it is present: - Repository config reading by default includes $GIT_DIR/config _and_ $GIT_DIR/config.worktree. "config" file remains shared in multiple worktree setup. - The special treatment for core.bare and core.worktree, to stay effective only in main worktree, is gone. These config settings are supposed to be in config.worktree. This extension is most useful in multiple worktree setup because you now have an option to store per-worktree config (which is either .git/config.worktree for main worktree, or .git/worktrees/xx/config.worktree for linked ones). This extension can be used in single worktree mode, even though it's pretty much useless (but this can happen after you remove all linked worktrees and move back to single worktree). "git config" reads from both "config" and "config.worktree" by default (i.e. without either --user, --file...) when this extension is present. Default writes still go to "config", not "config.worktree". A new option --worktree is added for that (*). Since a new repo extension is introduced, existing git binaries should refuse to access to the repo (both from main and linked worktrees). So they will not misread the config file (i.e. skip the config.worktree part). They may still accidentally write to the config file anyway if they use with "git config --file <path>". This design places a bet on the assumption that the majority of config variables are shared so it is the default mode. A safer move would be default writes go to per-worktree file, so that accidental changes are isolated. (*) "git config --worktree" points back to "config" file when this extension is not present and there is only one worktree so that it works in any both single and multiple worktree setups. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-21 16:02:28 +02:00
use_worktree_config +
!!given_config_source.file + !!given_config_source.blob > 1) {
error(_("only one config file at a time"));
usage_builtin_config();
}
if (nongit) {
if (use_local_config)
die(_("--local can only be used inside a git repository"));
if (given_config_source.blob)
die(_("--blob can only be used inside a git repository"));
if (use_worktree_config)
die(_("--worktree can only be used inside a git repository"));
}
if (given_config_source.file &&
!strcmp(given_config_source.file, "-")) {
given_config_source.file = NULL;
given_config_source.use_stdin = 1;
given_config_source.scope = CONFIG_SCOPE_COMMAND;
}
if (use_global_config) {
char *user_config, *xdg_config;
git_global_config(&user_config, &xdg_config);
if (!user_config)
/*
* It is unknown if HOME/.gitconfig exists, so
* we do not know if we should write to XDG
* location; error out even if XDG_CONFIG_HOME
* is set and points at a sane location.
*/
die(_("$HOME not set"));
given_config_source.scope = CONFIG_SCOPE_GLOBAL;
config: allow inaccessible configuration under $HOME The changes v1.7.12.1~2^2~4 (config: warn on inaccessible files, 2012-08-21) and v1.8.1.1~22^2~2 (config: treat user and xdg config permission problems as errors, 2012-10-13) were intended to prevent important configuration (think "[transfer] fsckobjects") from being ignored when the configuration is unintentionally unreadable (for example with EIO on a flaky filesystem, or with ENOMEM due to a DoS attack). Usually ~/.gitconfig and ~/.config/git are readable by the current user, and if they aren't then it would be easy to fix those permissions, so the damage from adding this check should have been minimal. Unfortunately the access() check often trips when git is being run as a server. A daemon (such as inetd or git-daemon) starts as "root", creates a listening socket, and then drops privileges, meaning that when git commands are invoked they cannot access $HOME and die with fatal: unable to access '/root/.config/git/config': Permission denied Any patch to fix this would have one of three problems: 1. We annoy sysadmins who need to take an extra step to handle HOME when dropping privileges (the current behavior, or any other proposal that they have to opt into). 2. We annoy sysadmins who want to set HOME when dropping privileges, either by making what they want to do impossible, or making them set an extra variable or option to accomplish what used to work (e.g., a patch to git-daemon to set HOME when --user is passed). 3. We loosen the check, so some cases which might be noteworthy are not caught. This patch is of type (3). Treat user and xdg configuration that are inaccessible due to permissions (EACCES) as though no user configuration was provided at all. An alternative method would be to check if $HOME is readable, but that would not help in cases where the user who dropped privileges had a globally readable HOME with only .config or .gitconfig being private. This does not change the behavior when /etc/gitconfig or .git/config is unreadable (since those are more serious configuration errors), nor when ~/.gitconfig or ~/.config/git is unreadable due to problems other than permissions. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Improved-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-12 23:03:18 +02:00
if (access_or_warn(user_config, R_OK, 0) &&
xdg_config && !access_or_warn(xdg_config, R_OK, 0)) {
given_config_source.file = xdg_config;
free(user_config);
} else {
given_config_source.file = user_config;
free(xdg_config);
}
}
else if (use_system_config) {
given_config_source.file = git_system_config();
given_config_source.scope = CONFIG_SCOPE_SYSTEM;
} else if (use_local_config) {
given_config_source.file = git_pathdup("config");
given_config_source.scope = CONFIG_SCOPE_LOCAL;
} else if (use_worktree_config) {
struct worktree **worktrees = get_worktrees();
worktree: add per-worktree config files A new repo extension is added, worktreeConfig. When it is present: - Repository config reading by default includes $GIT_DIR/config _and_ $GIT_DIR/config.worktree. "config" file remains shared in multiple worktree setup. - The special treatment for core.bare and core.worktree, to stay effective only in main worktree, is gone. These config settings are supposed to be in config.worktree. This extension is most useful in multiple worktree setup because you now have an option to store per-worktree config (which is either .git/config.worktree for main worktree, or .git/worktrees/xx/config.worktree for linked ones). This extension can be used in single worktree mode, even though it's pretty much useless (but this can happen after you remove all linked worktrees and move back to single worktree). "git config" reads from both "config" and "config.worktree" by default (i.e. without either --user, --file...) when this extension is present. Default writes still go to "config", not "config.worktree". A new option --worktree is added for that (*). Since a new repo extension is introduced, existing git binaries should refuse to access to the repo (both from main and linked worktrees). So they will not misread the config file (i.e. skip the config.worktree part). They may still accidentally write to the config file anyway if they use with "git config --file <path>". This design places a bet on the assumption that the majority of config variables are shared so it is the default mode. A safer move would be default writes go to per-worktree file, so that accidental changes are isolated. (*) "git config --worktree" points back to "config" file when this extension is not present and there is only one worktree so that it works in any both single and multiple worktree setups. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-21 16:02:28 +02:00
if (repository_format_worktree_config)
given_config_source.file = git_pathdup("config.worktree");
else if (worktrees[0] && worktrees[1])
die(_("--worktree cannot be used with multiple "
"working trees unless the config\n"
"extension worktreeConfig is enabled. "
"Please read \"CONFIGURATION FILE\"\n"
"section in \"git help worktree\" for details"));
else
given_config_source.file = git_pathdup("config");
given_config_source.scope = CONFIG_SCOPE_LOCAL;
worktree: add per-worktree config files A new repo extension is added, worktreeConfig. When it is present: - Repository config reading by default includes $GIT_DIR/config _and_ $GIT_DIR/config.worktree. "config" file remains shared in multiple worktree setup. - The special treatment for core.bare and core.worktree, to stay effective only in main worktree, is gone. These config settings are supposed to be in config.worktree. This extension is most useful in multiple worktree setup because you now have an option to store per-worktree config (which is either .git/config.worktree for main worktree, or .git/worktrees/xx/config.worktree for linked ones). This extension can be used in single worktree mode, even though it's pretty much useless (but this can happen after you remove all linked worktrees and move back to single worktree). "git config" reads from both "config" and "config.worktree" by default (i.e. without either --user, --file...) when this extension is present. Default writes still go to "config", not "config.worktree". A new option --worktree is added for that (*). Since a new repo extension is introduced, existing git binaries should refuse to access to the repo (both from main and linked worktrees). So they will not misread the config file (i.e. skip the config.worktree part). They may still accidentally write to the config file anyway if they use with "git config --file <path>". This design places a bet on the assumption that the majority of config variables are shared so it is the default mode. A safer move would be default writes go to per-worktree file, so that accidental changes are isolated. (*) "git config --worktree" points back to "config" file when this extension is not present and there is only one worktree so that it works in any both single and multiple worktree setups. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-21 16:02:28 +02:00
free_worktrees(worktrees);
} else if (given_config_source.file) {
if (!is_absolute_path(given_config_source.file) && prefix)
given_config_source.file =
prefix_filename(prefix, given_config_source.file);
given_config_source.scope = CONFIG_SCOPE_COMMAND;
} else if (given_config_source.blob) {
given_config_source.scope = CONFIG_SCOPE_COMMAND;
}
if (respect_includes_opt == -1)
config_options.respect_includes = !given_config_source.file;
else
config_options.respect_includes = respect_includes_opt;
if (!nongit) {
config_options.commondir = get_git_common_dir();
config_options.git_dir = get_git_dir();
}
config: add include directive It can be useful to split your ~/.gitconfig across multiple files. For example, you might have a "main" file which is used on many machines, but a small set of per-machine tweaks. Or you may want to make some of your config public (e.g., clever aliases) while keeping other data back (e.g., your name or other identifying information). Or you may want to include a number of config options in some subset of your repos without copying and pasting (e.g., you want to reference them from the .git/config of participating repos). This patch introduces an include directive for config files. It looks like: [include] path = /path/to/file This is syntactically backwards-compatible with existing git config parsers (i.e., they will see it as another config entry and ignore it unless you are looking up include.path). The implementation provides a "git_config_include" callback which wraps regular config callbacks. Callers can pass it to git_config_from_file, and it will transparently follow any include directives, passing all of the discovered options to the real callback. Include directives are turned on automatically for "regular" git config parsing. This includes calls to git_config, as well as calls to the "git config" program that do not specify a single file (e.g., using "-f", "--global", etc). They are not turned on in other cases, including: 1. Parsing of other config-like files, like .gitmodules. There isn't a real need, and I'd rather be conservative and avoid unnecessary incompatibility or confusion. 2. Reading single files via "git config". This is for two reasons: a. backwards compatibility with scripts looking at config-like files. b. inspection of a specific file probably means you care about just what's in that file, not a general lookup for "do we have this value anywhere at all". If that is not the case, the caller can always specify "--includes". 3. Writing files via "git config"; we want to treat include.* variables as literal items to be copied (or modified), and not expand them. So "git config --unset-all foo.bar" would operate _only_ on .git/config, not any of its included files (just as it also does not operate on ~/.gitconfig). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-06 10:54:04 +01:00
if (end_nul) {
term = '\0';
delim = '\n';
key_delim = '\n';
}
if ((actions & (ACTION_GET_COLOR|ACTION_GET_COLORBOOL)) && type) {
error(_("--get-color and variable type are incoherent"));
usage_builtin_config();
}
if (HAS_MULTI_BITS(actions)) {
error(_("only one action at a time"));
usage_builtin_config();
}
if (actions == 0)
switch (argc) {
case 1: actions = ACTION_GET; break;
case 2: actions = ACTION_SET; break;
case 3: actions = ACTION_SET_ALL; break;
default:
usage_builtin_config();
}
if (omit_values &&
!(actions == ACTION_LIST || actions == ACTION_GET_REGEXP)) {
error(_("--name-only is only applicable to --list or --get-regexp"));
usage_builtin_config();
}
if (show_origin && !(actions &
(ACTION_GET|ACTION_GET_ALL|ACTION_GET_REGEXP|ACTION_LIST))) {
error(_("--show-origin is only applicable to --get, --get-all, "
"--get-regexp, and --list"));
usage_builtin_config();
}
builtin/config: introduce `--default` For some use cases, callers of the `git-config(1)` builtin would like to fallback to default values when the variable asked for does not exist. In addition, users would like to use existing type specifiers to ensure that values are parsed correctly when they do exist in the configuration. For example, to fetch a value without a type specifier and fallback to `$fallback`, the following is required: $ git config core.foo || echo "$fallback" This is fine for most values, but can be tricky for difficult-to-express `$fallback`'s, like ANSI color codes. This motivates `--get-color`, which is a one-off exception to the normal type specifier rules wherein a user specifies both the configuration variable and an optional fallback. Both are formatted according to their type specifier, which eases the burden on the user to ensure that values are correctly formatted. This commit (and those following it in this series) aim to eventually replace `--get-color` with a consistent alternative. By introducing `--default`, we allow the `--get-color` action to be promoted to a `--type=color` type specifier, retaining the "fallback" behavior via the `--default` flag introduced in this commit. For example, we aim to replace: $ git config --get-color variable [default] [...] with: $ git config --default default --type=color variable [...] Values filled by `--default` behave exactly as if they were present in the affected configuration file; they will be parsed by type specifiers without the knowledge that they are not themselves present in the configuration. Specifically, this means that the following will work: $ git config --int --default 1M does.not.exist 1048576 In subsequent commits, we will offer `--type=color`, which (in conjunction with `--default`) will be sufficient to replace `--get-color`. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-10 02:18:26 +02:00
if (default_value && !(actions & ACTION_GET)) {
error(_("--default is only applicable to --get"));
usage_builtin_config();
builtin/config: introduce `--default` For some use cases, callers of the `git-config(1)` builtin would like to fallback to default values when the variable asked for does not exist. In addition, users would like to use existing type specifiers to ensure that values are parsed correctly when they do exist in the configuration. For example, to fetch a value without a type specifier and fallback to `$fallback`, the following is required: $ git config core.foo || echo "$fallback" This is fine for most values, but can be tricky for difficult-to-express `$fallback`'s, like ANSI color codes. This motivates `--get-color`, which is a one-off exception to the normal type specifier rules wherein a user specifies both the configuration variable and an optional fallback. Both are formatted according to their type specifier, which eases the burden on the user to ensure that values are correctly formatted. This commit (and those following it in this series) aim to eventually replace `--get-color` with a consistent alternative. By introducing `--default`, we allow the `--get-color` action to be promoted to a `--type=color` type specifier, retaining the "fallback" behavior via the `--default` flag introduced in this commit. For example, we aim to replace: $ git config --get-color variable [default] [...] with: $ git config --default default --type=color variable [...] Values filled by `--default` behave exactly as if they were present in the affected configuration file; they will be parsed by type specifiers without the knowledge that they are not themselves present in the configuration. Specifically, this means that the following will work: $ git config --int --default 1M does.not.exist 1048576 In subsequent commits, we will offer `--type=color`, which (in conjunction with `--default`) will be sufficient to replace `--get-color`. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-10 02:18:26 +02:00
}
/* check usage of --fixed-value */
if (fixed_value) {
int allowed_usage = 0;
switch (actions) {
/* git config --get <name> <value-pattern> */
case ACTION_GET:
/* git config --get-all <name> <value-pattern> */
case ACTION_GET_ALL:
/* git config --get-regexp <name-pattern> <value-pattern> */
case ACTION_GET_REGEXP:
/* git config --unset <name> <value-pattern> */
case ACTION_UNSET:
/* git config --unset-all <name> <value-pattern> */
case ACTION_UNSET_ALL:
allowed_usage = argc > 1 && !!argv[1];
break;
/* git config <name> <value> <value-pattern> */
case ACTION_SET_ALL:
/* git config --replace-all <name> <value> <value-pattern> */
case ACTION_REPLACE_ALL:
allowed_usage = argc > 2 && !!argv[2];
break;
/* other options don't allow --fixed-value */
}
if (!allowed_usage) {
error(_("--fixed-value only applies with 'value-pattern'"));
usage_builtin_config();
}
flags |= CONFIG_FLAGS_FIXED_VALUE;
}
if (actions & PAGING_ACTIONS)
setup_auto_pager("config", 1);
if (actions == ACTION_LIST) {
check_argc(argc, 0, 0);
if (config_with_options(show_all_config, NULL,
&given_config_source,
&config_options) < 0) {
if (given_config_source.file)
die_errno(_("unable to read config file '%s'"),
given_config_source.file);
else
die(_("error processing config file(s)"));
}
}
else if (actions == ACTION_EDIT) {
char *config_file;
check_argc(argc, 0, 0);
if (!given_config_source.file && nongit)
die(_("not in a git directory"));
if (given_config_source.use_stdin)
die(_("editing stdin is not supported"));
if (given_config_source.blob)
die(_("editing blobs is not supported"));
git_config(git_default_config, NULL);
config_file = given_config_source.file ?
xstrdup(given_config_source.file) :
git_pathdup("config");
if (use_global_config) {
int fd = open(config_file, O_CREAT | O_EXCL | O_WRONLY, 0666);
if (fd >= 0) {
char *content = default_user_config();
write_str_in_full(fd, content);
free(content);
close(fd);
}
else if (errno != EEXIST)
die_errno(_("cannot create configuration file %s"), config_file);
}
launch_editor(config_file, NULL, NULL);
free(config_file);
}
else if (actions == ACTION_SET) {
check_write();
check_argc(argc, 2, 2);
value = normalize_value(argv[0], argv[1]);
ret = git_config_set_in_file_gently(given_config_source.file, argv[0], value);
if (ret == CONFIG_NOTHING_SET)
error(_("cannot overwrite multiple values with a single value\n"
" Use a regexp, --add or --replace-all to change %s."), argv[0]);
}
else if (actions == ACTION_SET_ALL) {
check_write();
check_argc(argc, 2, 3);
value = normalize_value(argv[0], argv[1]);
built-ins: use free() not UNLEAK() if trivial, rm dead code For a lot of uses of UNLEAK() it would be quite tricky to release the memory involved, or we're missing the relevant *_(release|clear)() functions. But in these cases we have them already, and can just invoke them on the variable(s) involved, instead of UNLEAK(). For "builtin/worktree.c" the UNLEAK() was also added in [1], but the struct member it's unleaking was removed in [2]. The only non-"int" member of that structure is "const char *keep_locked", which comes to us via "argv" or a string literal[3]. We have good visibility via the compiler and tooling (e.g. SANITIZE=address) on bad free()-ing, but none on UNLEAK() we don't need anymore. So let's prefer releasing the memory when it's easy. For "bugreport", "worktree" and "config" we need to start using a "ret = ..." return pattern. For "builtin/bugreport.c" these UNLEAK() were added in [4], and for "builtin/config.c" in [1]. For "config" the code seen here was the only user of the "value" variable. For "ACTION_{RENAME,REMOVE}_SECTION" we need to be sure to return the right exit code in the cases where we were relying on falling through to the top-level. I think there's still a use-case for UNLEAK(), but hat it's changed since then. Using it so that "we can see the real leaks" is counter-productive in these cases. It's more useful to have UNLEAK() be a marker of the remaining odd cases where it's hard to free() the memory for whatever reason. With this change less than 20 of them remain in-tree. 1. 0e5bba53af7 (add UNLEAK annotation for reducing leak false positives, 2017-09-08) 2. d861d34a6ed (worktree: remove extra members from struct add_opts, 2018-04-24) 3. 0db4961c49b (worktree: teach `add` to accept --reason <string> with --lock, 2021-07-15) 4. 0e5bba53af7 and 00d8c311050 (commit: fix "author_ident" leak, 2022-05-12). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Taylor Blau <me@ttaylorr.com>
2022-11-08 19:17:51 +01:00
ret = git_config_set_multivar_in_file_gently(given_config_source.file,
argv[0], value, argv[2],
flags);
}
else if (actions == ACTION_ADD) {
check_write();
check_argc(argc, 2, 2);
value = normalize_value(argv[0], argv[1]);
built-ins: use free() not UNLEAK() if trivial, rm dead code For a lot of uses of UNLEAK() it would be quite tricky to release the memory involved, or we're missing the relevant *_(release|clear)() functions. But in these cases we have them already, and can just invoke them on the variable(s) involved, instead of UNLEAK(). For "builtin/worktree.c" the UNLEAK() was also added in [1], but the struct member it's unleaking was removed in [2]. The only non-"int" member of that structure is "const char *keep_locked", which comes to us via "argv" or a string literal[3]. We have good visibility via the compiler and tooling (e.g. SANITIZE=address) on bad free()-ing, but none on UNLEAK() we don't need anymore. So let's prefer releasing the memory when it's easy. For "bugreport", "worktree" and "config" we need to start using a "ret = ..." return pattern. For "builtin/bugreport.c" these UNLEAK() were added in [4], and for "builtin/config.c" in [1]. For "config" the code seen here was the only user of the "value" variable. For "ACTION_{RENAME,REMOVE}_SECTION" we need to be sure to return the right exit code in the cases where we were relying on falling through to the top-level. I think there's still a use-case for UNLEAK(), but hat it's changed since then. Using it so that "we can see the real leaks" is counter-productive in these cases. It's more useful to have UNLEAK() be a marker of the remaining odd cases where it's hard to free() the memory for whatever reason. With this change less than 20 of them remain in-tree. 1. 0e5bba53af7 (add UNLEAK annotation for reducing leak false positives, 2017-09-08) 2. d861d34a6ed (worktree: remove extra members from struct add_opts, 2018-04-24) 3. 0db4961c49b (worktree: teach `add` to accept --reason <string> with --lock, 2021-07-15) 4. 0e5bba53af7 and 00d8c311050 (commit: fix "author_ident" leak, 2022-05-12). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Taylor Blau <me@ttaylorr.com>
2022-11-08 19:17:51 +01:00
ret = git_config_set_multivar_in_file_gently(given_config_source.file,
argv[0], value,
CONFIG_REGEX_NONE,
flags);
}
else if (actions == ACTION_REPLACE_ALL) {
check_write();
check_argc(argc, 2, 3);
value = normalize_value(argv[0], argv[1]);
built-ins: use free() not UNLEAK() if trivial, rm dead code For a lot of uses of UNLEAK() it would be quite tricky to release the memory involved, or we're missing the relevant *_(release|clear)() functions. But in these cases we have them already, and can just invoke them on the variable(s) involved, instead of UNLEAK(). For "builtin/worktree.c" the UNLEAK() was also added in [1], but the struct member it's unleaking was removed in [2]. The only non-"int" member of that structure is "const char *keep_locked", which comes to us via "argv" or a string literal[3]. We have good visibility via the compiler and tooling (e.g. SANITIZE=address) on bad free()-ing, but none on UNLEAK() we don't need anymore. So let's prefer releasing the memory when it's easy. For "bugreport", "worktree" and "config" we need to start using a "ret = ..." return pattern. For "builtin/bugreport.c" these UNLEAK() were added in [4], and for "builtin/config.c" in [1]. For "config" the code seen here was the only user of the "value" variable. For "ACTION_{RENAME,REMOVE}_SECTION" we need to be sure to return the right exit code in the cases where we were relying on falling through to the top-level. I think there's still a use-case for UNLEAK(), but hat it's changed since then. Using it so that "we can see the real leaks" is counter-productive in these cases. It's more useful to have UNLEAK() be a marker of the remaining odd cases where it's hard to free() the memory for whatever reason. With this change less than 20 of them remain in-tree. 1. 0e5bba53af7 (add UNLEAK annotation for reducing leak false positives, 2017-09-08) 2. d861d34a6ed (worktree: remove extra members from struct add_opts, 2018-04-24) 3. 0db4961c49b (worktree: teach `add` to accept --reason <string> with --lock, 2021-07-15) 4. 0e5bba53af7 and 00d8c311050 (commit: fix "author_ident" leak, 2022-05-12). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Taylor Blau <me@ttaylorr.com>
2022-11-08 19:17:51 +01:00
ret = git_config_set_multivar_in_file_gently(given_config_source.file,
argv[0], value, argv[2],
flags | CONFIG_FLAGS_MULTI_REPLACE);
}
else if (actions == ACTION_GET) {
check_argc(argc, 1, 2);
return get_value(argv[0], argv[1], flags);
}
else if (actions == ACTION_GET_ALL) {
do_all = 1;
check_argc(argc, 1, 2);
return get_value(argv[0], argv[1], flags);
}
else if (actions == ACTION_GET_REGEXP) {
show_keys = 1;
use_key_regexp = 1;
do_all = 1;
check_argc(argc, 1, 2);
return get_value(argv[0], argv[1], flags);
}
else if (actions == ACTION_GET_URLMATCH) {
check_argc(argc, 2, 2);
return get_urlmatch(argv[0], argv[1]);
}
else if (actions == ACTION_UNSET) {
check_write();
check_argc(argc, 1, 2);
if (argc == 2)
return git_config_set_multivar_in_file_gently(given_config_source.file,
argv[0], NULL, argv[1],
flags);
else
return git_config_set_in_file_gently(given_config_source.file,
argv[0], NULL);
}
else if (actions == ACTION_UNSET_ALL) {
check_write();
check_argc(argc, 1, 2);
return git_config_set_multivar_in_file_gently(given_config_source.file,
argv[0], NULL, argv[1],
flags | CONFIG_FLAGS_MULTI_REPLACE);
}
else if (actions == ACTION_RENAME_SECTION) {
check_write();
check_argc(argc, 2, 2);
ret = git_config_rename_section_in_file(given_config_source.file,
argv[0], argv[1]);
if (ret < 0)
return ret;
built-ins: use free() not UNLEAK() if trivial, rm dead code For a lot of uses of UNLEAK() it would be quite tricky to release the memory involved, or we're missing the relevant *_(release|clear)() functions. But in these cases we have them already, and can just invoke them on the variable(s) involved, instead of UNLEAK(). For "builtin/worktree.c" the UNLEAK() was also added in [1], but the struct member it's unleaking was removed in [2]. The only non-"int" member of that structure is "const char *keep_locked", which comes to us via "argv" or a string literal[3]. We have good visibility via the compiler and tooling (e.g. SANITIZE=address) on bad free()-ing, but none on UNLEAK() we don't need anymore. So let's prefer releasing the memory when it's easy. For "bugreport", "worktree" and "config" we need to start using a "ret = ..." return pattern. For "builtin/bugreport.c" these UNLEAK() were added in [4], and for "builtin/config.c" in [1]. For "config" the code seen here was the only user of the "value" variable. For "ACTION_{RENAME,REMOVE}_SECTION" we need to be sure to return the right exit code in the cases where we were relying on falling through to the top-level. I think there's still a use-case for UNLEAK(), but hat it's changed since then. Using it so that "we can see the real leaks" is counter-productive in these cases. It's more useful to have UNLEAK() be a marker of the remaining odd cases where it's hard to free() the memory for whatever reason. With this change less than 20 of them remain in-tree. 1. 0e5bba53af7 (add UNLEAK annotation for reducing leak false positives, 2017-09-08) 2. d861d34a6ed (worktree: remove extra members from struct add_opts, 2018-04-24) 3. 0db4961c49b (worktree: teach `add` to accept --reason <string> with --lock, 2021-07-15) 4. 0e5bba53af7 and 00d8c311050 (commit: fix "author_ident" leak, 2022-05-12). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Taylor Blau <me@ttaylorr.com>
2022-11-08 19:17:51 +01:00
else if (!ret)
die(_("no such section: %s"), argv[0]);
built-ins: use free() not UNLEAK() if trivial, rm dead code For a lot of uses of UNLEAK() it would be quite tricky to release the memory involved, or we're missing the relevant *_(release|clear)() functions. But in these cases we have them already, and can just invoke them on the variable(s) involved, instead of UNLEAK(). For "builtin/worktree.c" the UNLEAK() was also added in [1], but the struct member it's unleaking was removed in [2]. The only non-"int" member of that structure is "const char *keep_locked", which comes to us via "argv" or a string literal[3]. We have good visibility via the compiler and tooling (e.g. SANITIZE=address) on bad free()-ing, but none on UNLEAK() we don't need anymore. So let's prefer releasing the memory when it's easy. For "bugreport", "worktree" and "config" we need to start using a "ret = ..." return pattern. For "builtin/bugreport.c" these UNLEAK() were added in [4], and for "builtin/config.c" in [1]. For "config" the code seen here was the only user of the "value" variable. For "ACTION_{RENAME,REMOVE}_SECTION" we need to be sure to return the right exit code in the cases where we were relying on falling through to the top-level. I think there's still a use-case for UNLEAK(), but hat it's changed since then. Using it so that "we can see the real leaks" is counter-productive in these cases. It's more useful to have UNLEAK() be a marker of the remaining odd cases where it's hard to free() the memory for whatever reason. With this change less than 20 of them remain in-tree. 1. 0e5bba53af7 (add UNLEAK annotation for reducing leak false positives, 2017-09-08) 2. d861d34a6ed (worktree: remove extra members from struct add_opts, 2018-04-24) 3. 0db4961c49b (worktree: teach `add` to accept --reason <string> with --lock, 2021-07-15) 4. 0e5bba53af7 and 00d8c311050 (commit: fix "author_ident" leak, 2022-05-12). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Taylor Blau <me@ttaylorr.com>
2022-11-08 19:17:51 +01:00
else
ret = 0;
}
else if (actions == ACTION_REMOVE_SECTION) {
check_write();
check_argc(argc, 1, 1);
ret = git_config_rename_section_in_file(given_config_source.file,
argv[0], NULL);
if (ret < 0)
return ret;
built-ins: use free() not UNLEAK() if trivial, rm dead code For a lot of uses of UNLEAK() it would be quite tricky to release the memory involved, or we're missing the relevant *_(release|clear)() functions. But in these cases we have them already, and can just invoke them on the variable(s) involved, instead of UNLEAK(). For "builtin/worktree.c" the UNLEAK() was also added in [1], but the struct member it's unleaking was removed in [2]. The only non-"int" member of that structure is "const char *keep_locked", which comes to us via "argv" or a string literal[3]. We have good visibility via the compiler and tooling (e.g. SANITIZE=address) on bad free()-ing, but none on UNLEAK() we don't need anymore. So let's prefer releasing the memory when it's easy. For "bugreport", "worktree" and "config" we need to start using a "ret = ..." return pattern. For "builtin/bugreport.c" these UNLEAK() were added in [4], and for "builtin/config.c" in [1]. For "config" the code seen here was the only user of the "value" variable. For "ACTION_{RENAME,REMOVE}_SECTION" we need to be sure to return the right exit code in the cases where we were relying on falling through to the top-level. I think there's still a use-case for UNLEAK(), but hat it's changed since then. Using it so that "we can see the real leaks" is counter-productive in these cases. It's more useful to have UNLEAK() be a marker of the remaining odd cases where it's hard to free() the memory for whatever reason. With this change less than 20 of them remain in-tree. 1. 0e5bba53af7 (add UNLEAK annotation for reducing leak false positives, 2017-09-08) 2. d861d34a6ed (worktree: remove extra members from struct add_opts, 2018-04-24) 3. 0db4961c49b (worktree: teach `add` to accept --reason <string> with --lock, 2021-07-15) 4. 0e5bba53af7 and 00d8c311050 (commit: fix "author_ident" leak, 2022-05-12). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Taylor Blau <me@ttaylorr.com>
2022-11-08 19:17:51 +01:00
else if (!ret)
die(_("no such section: %s"), argv[0]);
built-ins: use free() not UNLEAK() if trivial, rm dead code For a lot of uses of UNLEAK() it would be quite tricky to release the memory involved, or we're missing the relevant *_(release|clear)() functions. But in these cases we have them already, and can just invoke them on the variable(s) involved, instead of UNLEAK(). For "builtin/worktree.c" the UNLEAK() was also added in [1], but the struct member it's unleaking was removed in [2]. The only non-"int" member of that structure is "const char *keep_locked", which comes to us via "argv" or a string literal[3]. We have good visibility via the compiler and tooling (e.g. SANITIZE=address) on bad free()-ing, but none on UNLEAK() we don't need anymore. So let's prefer releasing the memory when it's easy. For "bugreport", "worktree" and "config" we need to start using a "ret = ..." return pattern. For "builtin/bugreport.c" these UNLEAK() were added in [4], and for "builtin/config.c" in [1]. For "config" the code seen here was the only user of the "value" variable. For "ACTION_{RENAME,REMOVE}_SECTION" we need to be sure to return the right exit code in the cases where we were relying on falling through to the top-level. I think there's still a use-case for UNLEAK(), but hat it's changed since then. Using it so that "we can see the real leaks" is counter-productive in these cases. It's more useful to have UNLEAK() be a marker of the remaining odd cases where it's hard to free() the memory for whatever reason. With this change less than 20 of them remain in-tree. 1. 0e5bba53af7 (add UNLEAK annotation for reducing leak false positives, 2017-09-08) 2. d861d34a6ed (worktree: remove extra members from struct add_opts, 2018-04-24) 3. 0db4961c49b (worktree: teach `add` to accept --reason <string> with --lock, 2021-07-15) 4. 0e5bba53af7 and 00d8c311050 (commit: fix "author_ident" leak, 2022-05-12). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Taylor Blau <me@ttaylorr.com>
2022-11-08 19:17:51 +01:00
else
ret = 0;
}
else if (actions == ACTION_GET_COLOR) {
config: fix parsing of "git config --get-color some.key -1" Most of git-config's command line options use OPT_BIT to choose an action, and then parse the non-option arguments in a context-dependent way. However, --get-color and --get-colorbool are unlike the rest of the options, in that they are OPT_STRING, taking the option name as a parameter. This generally works, because we then use the presence of those strings to set an action bit anyway. But it does mean that the option-parser will continue looking for options even after the key (because it is not a non-option; it is an argument to an option). And running: git config --get-color some.key -1 (to use "-1" as the default color spec) will barf, claiming that "-1" is not an option. Instead, we should treat --get-color and --get-colorbool as action bits, just like --add, --get, and all the other actions, and then check that the non-option arguments we got are sane. This fixes the weirdness above, and makes those two options like all the others. This "fixes" a test in t4026, which checked that feeding "-2" as a color should fail (it does fail, but prior to this patch, because parseopt barfed, not because we actually ever tried to parse the color). This also catches other errors, like: git config --get-color some.key black blue which previously silently ignored "blue" (and now will complain that you gave too many arguments). There are some possible regressions, though. We now disallow these, which currently do what you would expect: # specifying other options after the action git config --get-color some.key --file whatever # using long-arg syntax git config --get-color=some.key However, we have never advertised these in the documentation, and in fact they did not work in some older versions of git. The behavior was apparently switched as an accidental side effect of d64ec16 (git config: reorganize to use parseopt, 2009-02-21). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-11-20 16:15:51 +01:00
check_argc(argc, 1, 2);
get_color(argv[0], argv[1]);
}
else if (actions == ACTION_GET_COLORBOOL) {
config: fix parsing of "git config --get-color some.key -1" Most of git-config's command line options use OPT_BIT to choose an action, and then parse the non-option arguments in a context-dependent way. However, --get-color and --get-colorbool are unlike the rest of the options, in that they are OPT_STRING, taking the option name as a parameter. This generally works, because we then use the presence of those strings to set an action bit anyway. But it does mean that the option-parser will continue looking for options even after the key (because it is not a non-option; it is an argument to an option). And running: git config --get-color some.key -1 (to use "-1" as the default color spec) will barf, claiming that "-1" is not an option. Instead, we should treat --get-color and --get-colorbool as action bits, just like --add, --get, and all the other actions, and then check that the non-option arguments we got are sane. This fixes the weirdness above, and makes those two options like all the others. This "fixes" a test in t4026, which checked that feeding "-2" as a color should fail (it does fail, but prior to this patch, because parseopt barfed, not because we actually ever tried to parse the color). This also catches other errors, like: git config --get-color some.key black blue which previously silently ignored "blue" (and now will complain that you gave too many arguments). There are some possible regressions, though. We now disallow these, which currently do what you would expect: # specifying other options after the action git config --get-color some.key --file whatever # using long-arg syntax git config --get-color=some.key However, we have never advertised these in the documentation, and in fact they did not work in some older versions of git. The behavior was apparently switched as an accidental side effect of d64ec16 (git config: reorganize to use parseopt, 2009-02-21). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-11-20 16:15:51 +01:00
check_argc(argc, 1, 2);
if (argc == 2)
color_stdout_is_tty = git_config_bool("command line", argv[1]);
return get_colorbool(argv[0], argc == 2);
}
built-ins: use free() not UNLEAK() if trivial, rm dead code For a lot of uses of UNLEAK() it would be quite tricky to release the memory involved, or we're missing the relevant *_(release|clear)() functions. But in these cases we have them already, and can just invoke them on the variable(s) involved, instead of UNLEAK(). For "builtin/worktree.c" the UNLEAK() was also added in [1], but the struct member it's unleaking was removed in [2]. The only non-"int" member of that structure is "const char *keep_locked", which comes to us via "argv" or a string literal[3]. We have good visibility via the compiler and tooling (e.g. SANITIZE=address) on bad free()-ing, but none on UNLEAK() we don't need anymore. So let's prefer releasing the memory when it's easy. For "bugreport", "worktree" and "config" we need to start using a "ret = ..." return pattern. For "builtin/bugreport.c" these UNLEAK() were added in [4], and for "builtin/config.c" in [1]. For "config" the code seen here was the only user of the "value" variable. For "ACTION_{RENAME,REMOVE}_SECTION" we need to be sure to return the right exit code in the cases where we were relying on falling through to the top-level. I think there's still a use-case for UNLEAK(), but hat it's changed since then. Using it so that "we can see the real leaks" is counter-productive in these cases. It's more useful to have UNLEAK() be a marker of the remaining odd cases where it's hard to free() the memory for whatever reason. With this change less than 20 of them remain in-tree. 1. 0e5bba53af7 (add UNLEAK annotation for reducing leak false positives, 2017-09-08) 2. d861d34a6ed (worktree: remove extra members from struct add_opts, 2018-04-24) 3. 0db4961c49b (worktree: teach `add` to accept --reason <string> with --lock, 2021-07-15) 4. 0e5bba53af7 and 00d8c311050 (commit: fix "author_ident" leak, 2022-05-12). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Taylor Blau <me@ttaylorr.com>
2022-11-08 19:17:51 +01:00
free(value);
return ret;
}