git-commit-vandalism/t/t3406-rebase-message.sh

259 lines
6.7 KiB
Bash
Raw Normal View History

#!/bin/sh
test_description='messages from rebase operation'
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
tests: mark tests relying on the current default for `init.defaultBranch` In addition to the manual adjustment to let the `linux-gcc` CI job run the test suite with `master` and then with `main`, this patch makes sure that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts that currently rely on the initial branch name being `master by default. To determine which test scripts to mark up, the first step was to force-set the default branch name to `master` in - all test scripts that contain the keyword `master`, - t4211, which expects `t/t4211/history.export` with a hard-coded ref to initialize the default branch, - t5560 because it sources `t/t556x_common` which uses `master`, - t8002 and t8012 because both source `t/annotate-tests.sh` which also uses `master`) This trick was performed by this command: $ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\ ' $(git grep -l master t/t[0-9]*.sh) \ t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh After that, careful, manual inspection revealed that some of the test scripts containing the needle `master` do not actually rely on a specific default branch name: either they mention `master` only in a comment, or they initialize that branch specificially, or they do not actually refer to the current default branch. Therefore, the aforementioned modification was undone in those test scripts thusly: $ git checkout HEAD -- \ t/t0027-auto-crlf.sh t/t0060-path-utils.sh \ t/t1011-read-tree-sparse-checkout.sh \ t/t1305-config-include.sh t/t1309-early-config.sh \ t/t1402-check-ref-format.sh t/t1450-fsck.sh \ t/t2024-checkout-dwim.sh \ t/t2106-update-index-assume-unchanged.sh \ t/t3040-subprojects-basic.sh t/t3301-notes.sh \ t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \ t/t3436-rebase-more-options.sh \ t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \ t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \ t/t5511-refspec.sh t/t5526-fetch-submodules.sh \ t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \ t/t5548-push-porcelain.sh \ t/t5552-skipping-fetch-negotiator.sh \ t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \ t/t5614-clone-submodules-shallow.sh \ t/t7508-status.sh t/t7606-merge-custom.sh \ t/t9302-fast-import-unpack-limit.sh We excluded one set of test scripts in these commands, though: the range of `git p4` tests. The reason? `git p4` stores the (foreign) remote branch in the branch called `p4/master`, which is obviously not the default branch. Manual analysis revealed that only five of these tests actually require a specific default branch name to pass; They were modified thusly: $ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\ ' t/t980[0167]*.sh t/t9811*.sh Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-19 00:44:19 +01:00
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
. ./test-lib.sh
test_expect_success 'setup' '
test_commit O fileO &&
test_commit X fileX &&
git branch fast-forward &&
test_commit A fileA &&
test_commit B fileB &&
test_commit Y fileY &&
git checkout -b conflicts O &&
test_commit P &&
test_commit conflict-X fileX &&
test_commit Q &&
git checkout -b topic O &&
git cherry-pick A B &&
test_commit Z fileZ &&
git tag start
'
test_expect_success 'rebase -m' '
git rebase -m main >actual &&
test_must_be_empty actual
'
test_expect_success 'rebase against main twice' '
git rebase --apply main >out &&
test_i18ngrep "Current branch topic is up to date" out
'
test_expect_success 'rebase against main twice with --force' '
git rebase --force-rebase --apply main >out &&
test_i18ngrep "Current branch topic is up to date, rebase forced" out
'
test_expect_success 'rebase against main twice from another branch' '
git checkout topic^ &&
git rebase --apply main topic >out &&
test_i18ngrep "Current branch topic is up to date" out
'
test_expect_success 'rebase fast-forward to main' '
git checkout topic^ &&
rebase: rename the two primary rebase backends Two related changes, with separate rationale for each: Rename the 'interactive' backend to 'merge' because: * 'interactive' as a name caused confusion; this backend has been used for many kinds of non-interactive rebases, and will probably be used in the future for more non-interactive rebases than interactive ones given that we are making it the default. * 'interactive' is not the underlying strategy; merging is. * the directory where state is stored is not called .git/rebase-interactive but .git/rebase-merge. Rename the 'am' backend to 'apply' because: * Few users are familiar with git-am as a reference point. * Related to the above, the name 'am' makes sentences in the documentation harder for users to read and comprehend (they may read it as the verb from "I am"); avoiding this difficult places a large burden on anyone writing documentation about this backend to be very careful with quoting and sentence structure and often forces annoying redundancy to try to avoid such problems. * Users stumble over pronunciation ("am" as in "I am a person not a backend" or "am" as in "the first and thirteenth letters in the alphabet in order are "A-M"); this may drive confusion when one user tries to explain to another what they are doing. * While "am" is the tool driving this backend, the tool driving git-am is git-apply, and since we are driving towards lower-level tools for the naming of the merge backend we may as well do so here too. * The directory where state is stored has never been called .git/rebase-am, it was always called .git/rebase-apply. For all the reasons listed above: * Modify the documentation to refer to the backends with the new names * Provide a brief note in the documentation connecting the new names to the old names in case users run across the old names anywhere (e.g. in old release notes or older versions of the documentation) * Change the (new) --am command line flag to --apply * Rename some enums, variables, and functions to reinforce the new backend names for us as well. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-15 22:36:41 +01:00
git rebase --apply topic >out &&
test_i18ngrep "Fast-forwarded HEAD to topic" out
'
test_expect_success 'rebase --stat' '
git reset --hard start &&
git rebase --stat main >diffstat.txt &&
grep "^ fileX | *1 +$" diffstat.txt
'
test_expect_success 'rebase w/config rebase.stat' '
git reset --hard start &&
git config rebase.stat true &&
git rebase main >diffstat.txt &&
grep "^ fileX | *1 +$" diffstat.txt
'
test_expect_success 'rebase -n overrides config rebase.stat config' '
git reset --hard start &&
git config rebase.stat true &&
git rebase -n main >diffstat.txt &&
! grep "^ fileX | *1 +$" diffstat.txt
'
test_expect_success 'rebase --onto outputs the invalid ref' '
test_must_fail git rebase --onto invalid-ref HEAD HEAD 2>err &&
test_i18ngrep "invalid-ref" err
'
test_expect_success 'error out early upon -C<n> or --whitespace=<bad>' '
test_must_fail git rebase -Cnot-a-number HEAD 2>err &&
test_i18ngrep "numerical value" err &&
test_must_fail git rebase --whitespace=bad HEAD 2>err &&
test_i18ngrep "Invalid whitespace option" err
'
write_reflog_expect () {
if test $mode = --apply
then
rebase --apply: make reflog messages match rebase --merge The apply backend creates slightly different reflog messages to the merge backend when starting or finishing a rebase and when picking commits. These differences make it harder than it needs to be to parse the reflog (I have a script that reads the finishing messages from rebase and it is a pain to have to accommodate two different message formats). While it is possible to determine the backend used for a rebase from the reflog messages, the differences are not designed for that purpose. c2417d3af7 (rebase: drop '-i' from the reflog for interactive-based rebases, 2020-02-15) removed the clear distinction between the reflog messages of the two backends without complaint. As the merge backend is the default it is likely to be the format most common in existing reflogs. For that reason the apply backend is changed to format its reflog messages to match the merge backend as closely as possible. Note that there is still a difference as when committing a conflict resolution the apply backend will use "(pick)" rather than "(continue)" because it is not currently possible to change the message for a single commit. In addition to c2417d3af7 we also changed the reflog messages in 68aa495b59 (rebase: implement --merge via the interactive machinery, 2018-12-11) and 2ac0d6273f (rebase: change the default backend from "am" to "merge", 2020-02-15). This commit makes the same change to "git rebase --apply" that 2ac0d6273f made to "git rebase" without any backend specific options. As the messages are changed to use an existing format any scripts that can parse the reflog messages of the default rebase backend should be unaffected by this change. There are existing tests for the messages from both backends which are adjusted to ensure that they do not get out of sync in the future. Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-10-12 11:35:10 +02:00
sed 's/(continue)/(pick)/'
else
cat
fi >expect
}
test_reflog () {
mode=$1
reflog_action="$2"
test_expect_success "rebase $mode reflog${reflog_action:+ GIT_REFLOG_ACTION=$reflog_action}" '
git checkout conflicts &&
test_when_finished "git reset --hard Q" &&
(
if test -n "$reflog_action"
then
GIT_REFLOG_ACTION="$reflog_action" &&
export GIT_REFLOG_ACTION
fi &&
test_must_fail git rebase $mode main &&
echo resolved >fileX &&
git add fileX &&
git rebase --continue
) &&
git log -g --format=%gs -5 >actual &&
write_reflog_expect <<-EOF &&
${reflog_action:-rebase} (finish): returning to refs/heads/conflicts
${reflog_action:-rebase} (pick): Q
${reflog_action:-rebase} (continue): conflict-X
${reflog_action:-rebase} (pick): P
${reflog_action:-rebase} (start): checkout main
EOF
test_cmp expect actual &&
git log -g --format=%gs -1 conflicts >actual &&
write_reflog_expect <<-EOF &&
${reflog_action:-rebase} (finish): refs/heads/conflicts onto $(git rev-parse main)
EOF
test_cmp expect actual &&
# check there is only one new entry in the branch reflog
test_cmp_rev conflicts@{1} Q
'
test_expect_success "rebase $mode fast-forward reflog${reflog_action:+ GIT_REFLOG_ACTION=$reflog_action}" '
git checkout fast-forward &&
test_when_finished "git reset --hard X" &&
(
if test -n "$reflog_action"
then
GIT_REFLOG_ACTION="$reflog_action" &&
export GIT_REFLOG_ACTION
fi &&
git rebase $mode main
) &&
git log -g --format=%gs -2 >actual &&
write_reflog_expect <<-EOF &&
${reflog_action:-rebase} (finish): returning to refs/heads/fast-forward
${reflog_action:-rebase} (start): checkout main
EOF
test_cmp expect actual &&
git log -g --format=%gs -1 fast-forward >actual &&
write_reflog_expect <<-EOF &&
${reflog_action:-rebase} (finish): refs/heads/fast-forward onto $(git rev-parse main)
EOF
test_cmp expect actual &&
# check there is only one new entry in the branch reflog
test_cmp_rev fast-forward@{1} X
'
test_expect_success "rebase $mode --skip reflog${reflog_action:+ GIT_REFLOG_ACTION=$reflog_action}" '
git checkout conflicts &&
test_when_finished "git reset --hard Q" &&
(
if test -n "$reflog_action"
then
GIT_REFLOG_ACTION="$reflog_action" &&
export GIT_REFLOG_ACTION
fi &&
test_must_fail git rebase $mode main &&
git rebase --skip
) &&
git log -g --format=%gs -4 >actual &&
write_reflog_expect <<-EOF &&
${reflog_action:-rebase} (finish): returning to refs/heads/conflicts
${reflog_action:-rebase} (pick): Q
${reflog_action:-rebase} (pick): P
${reflog_action:-rebase} (start): checkout main
EOF
test_cmp expect actual
'
test_expect_success "rebase $mode --abort reflog${reflog_action:+ GIT_REFLOG_ACTION=$reflog_action}" '
git checkout conflicts &&
test_when_finished "git reset --hard Q" &&
git log -g -1 conflicts >branch-expect &&
(
if test -n "$reflog_action"
then
GIT_REFLOG_ACTION="$reflog_action" &&
export GIT_REFLOG_ACTION
fi &&
test_must_fail git rebase $mode main &&
git rebase --abort
) &&
git log -g --format=%gs -3 >actual &&
write_reflog_expect <<-EOF &&
${reflog_action:-rebase} (abort): returning to refs/heads/conflicts
${reflog_action:-rebase} (pick): P
${reflog_action:-rebase} (start): checkout main
EOF
test_cmp expect actual &&
# check branch reflog is unchanged
git log -g -1 conflicts >branch-actual &&
test_cmp branch-expect branch-actual
'
test_expect_success "rebase $mode --abort detached HEAD reflog${reflog_action:+ GIT_REFLOG_ACTION=$reflog_action}" '
git checkout Q &&
test_when_finished "git reset --hard Q" &&
(
if test -n "$reflog_action"
then
GIT_REFLOG_ACTION="$reflog_action" &&
export GIT_REFLOG_ACTION
fi &&
test_must_fail git rebase $mode main &&
git rebase --abort
) &&
git log -g --format=%gs -3 >actual &&
write_reflog_expect <<-EOF &&
${reflog_action:-rebase} (abort): returning to $(git rev-parse Q)
${reflog_action:-rebase} (pick): P
${reflog_action:-rebase} (start): checkout main
EOF
test_cmp expect actual
'
}
test_reflog --merge
test_reflog --merge my-reflog-action
test_reflog --apply
test_reflog --apply my-reflog-action
test_expect_success 'rebase -i onto unrelated history' '
git init unrelated &&
test_commit -C unrelated 1 &&
git -C unrelated remote add -f origin "$PWD" &&
git -C unrelated branch --set-upstream-to=origin/main &&
git -C unrelated -c core.editor=true rebase -i -v --stat >actual &&
test_i18ngrep "Changes to " actual &&
test_i18ngrep "5 files changed" actual
'
test_done