revision.c: generation-based topo-order algorithm

The current --topo-order algorithm requires walking all
reachable commits up front, topo-sorting them, all before
outputting the first value. This patch introduces a new
algorithm which uses stored generation numbers to
incrementally walk in topo-order, outputting commits as
we go. This can dramatically reduce the computation time
to write a fixed number of commits, such as when limiting
with "-n <N>" or filling the first page of a pager.

When running a command like 'git rev-list --topo-order HEAD',
Git performed the following steps:

1. Run limit_list(), which parses all reachable commits,
   adds them to a linked list, and distributes UNINTERESTING
   flags. If all unprocessed commits are UNINTERESTING, then
   it may terminate without walking all reachable commits.
   This does not occur if we do not specify UNINTERESTING
   commits.

2. Run sort_in_topological_order(), which is an implementation
   of Kahn's algorithm. It first iterates through the entire
   set of important commits and computes the in-degree of each
   (plus one, as we use 'zero' as a special value here). Then,
   we walk the commits in priority order, adding them to the
   priority queue if and only if their in-degree is one. As
   we remove commits from this priority queue, we decrement the
   in-degree of their parents.

3. While we are peeling commits for output, get_revision_1()
   uses pop_commit on the full list of commits computed by
   sort_in_topological_order().

In the new algorithm, these three steps correspond to three
different commit walks. We run these walks simultaneously,
and advance each only as far as necessary to satisfy the
requirements of the 'higher order' walk. We know when we can
pause each walk by using generation numbers from the commit-
graph feature.

Recall that the generation number of a commit satisfies:

* If the commit has at least one parent, then the generation
  number is one more than the maximum generation number among
  its parents.

* If the commit has no parent, then the generation number is one.

There are two special generation numbers:

* GENERATION_NUMBER_INFINITY: this value is 0xffffffff and
  indicates that the commit is not stored in the commit-graph and
  the generation number was not previously calculated.

* GENERATION_NUMBER_ZERO: this value (0) is a special indicator
  to say that the commit-graph was generated by a version of Git
  that does not compute generation numbers (such as v2.18.0).

Since we use generation_numbers_enabled() before using the new
algorithm, we do not need to worry about GENERATION_NUMBER_ZERO.
However, the existence of GENERATION_NUMBER_INFINITY implies the
following weaker statement than the usual we expect from
generation numbers:

    If A and B are commits with generation numbers gen(A) and
    gen(B) and gen(A) < gen(B), then A cannot reach B.

Thus, we will walk in each of our stages until the "maximum
unexpanded generation number" is strictly lower than the
generation number of a commit we are about to use.

The walks are as follows:

1. EXPLORE: using the explore_queue priority queue (ordered by
   maximizing the generation number), parse each reachable
   commit until all commits in the queue have generation
   number strictly lower than needed. During this walk, update
   the UNINTERESTING flags as necessary.

2. INDEGREE: using the indegree_queue priority queue (ordered
   by maximizing the generation number), add one to the in-
   degree of each parent for each commit that is walked. Since
   we walk in order of decreasing generation number, we know
   that discovering an in-degree value of 0 means the value for
   that commit was not initialized, so should be initialized to
   two. (Recall that in-degree value "1" is what we use to say a
   commit is ready for output.) As we iterate the parents of a
   commit during this walk, ensure the EXPLORE walk has walked
   beyond their generation numbers.

3. TOPO: using the topo_queue priority queue (ordered based on
   the sort_order given, which could be commit-date, author-
   date, or typical topo-order which treats the queue as a LIFO
   stack), remove a commit from the queue and decrement the
   in-degree of each parent. If a parent has an in-degree of
   one, then we add it to the topo_queue. Before we decrement
   the in-degree, however, ensure the INDEGREE walk has walked
   beyond that generation number.

The implementations of these walks are in the following methods:

* explore_walk_step and explore_to_depth
* indegree_walk_step and compute_indegrees_to_depth
* next_topo_commit and expand_topo_walk

These methods have some patterns that may seem strange at first,
but they are probably carry-overs from their equivalents in
limit_list and sort_in_topological_order.

One thing that is missing from this implementation is a proper
way to stop walking when the entire queue is UNINTERESTING, so
this implementation is not enabled by comparisions, such as in
'git rev-list --topo-order A..B'. This can be updated in the
future.

In my local testing, I used the following Git commands on the
Linux repository in three modes: HEAD~1 with no commit-graph,
HEAD~1 with a commit-graph, and HEAD with a commit-graph. This
allows comparing the benefits we get from parsing commits from
the commit-graph and then again the benefits we get by
restricting the set of commits we walk.

Test: git rev-list --topo-order -100 HEAD
HEAD~1, no commit-graph: 6.80 s
HEAD~1, w/ commit-graph: 0.77 s
  HEAD, w/ commit-graph: 0.02 s

Test: git rev-list --topo-order -100 HEAD -- tools
HEAD~1, no commit-graph: 9.63 s
HEAD~1, w/ commit-graph: 6.06 s
  HEAD, w/ commit-graph: 0.06 s

This speedup is due to a few things. First, the new generation-
number-enabled algorithm walks commits on order of the number of
results output (subject to some branching structure expectations).
Since we limit to 100 results, we are running a query similar to
filling a single page of results. Second, when specifying a path,
we must parse the root tree object for each commit we walk. The
previous benefits from the commit-graph are entirely from reading
the commit-graph instead of parsing commits. Since we need to
parse trees for the same number of commits as before, we slow
down significantly from the non-path-based query.

For the test above, I specifically selected a path that is changed
frequently, including by merge commits. A less-frequently-changed
path (such as 'README') has similar end-to-end time since we need
to walk the same number of commits (before determining we do not
have 100 hits). However, get the benefit that the output is
presented to the user as it is discovered, much the same as a
normal 'git log' command (no '--topo-order'). This is an improved
user experience, even if the command has the same runtime.

Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit is contained in:
Derrick Stolee 2018-11-01 13:46:22 +00:00 committed by Junio C Hamano
parent 5284fc5cc9
commit b45424181e
3 changed files with 194 additions and 7 deletions

View File

@ -59,7 +59,7 @@ struct object_array {
/* /*
* object flag allocation: * object flag allocation:
* revision.h: 0---------10 2526 * revision.h: 0---------10 25----28
* fetch-pack.c: 01 * fetch-pack.c: 01
* negotiator/default.c: 2--5 * negotiator/default.c: 2--5
* walker.c: 0-2 * walker.c: 0-2
@ -78,7 +78,7 @@ struct object_array {
* builtin/show-branch.c: 0-------------------------------------------26 * builtin/show-branch.c: 0-------------------------------------------26
* builtin/unpack-objects.c: 2021 * builtin/unpack-objects.c: 2021
*/ */
#define FLAG_BITS 27 #define FLAG_BITS 29
/* /*
* The object type is stored in 3 bits. * The object type is stored in 3 bits.

View File

@ -26,6 +26,7 @@
#include "argv-array.h" #include "argv-array.h"
#include "commit-reach.h" #include "commit-reach.h"
#include "commit-graph.h" #include "commit-graph.h"
#include "prio-queue.h"
volatile show_early_output_fn_t show_early_output; volatile show_early_output_fn_t show_early_output;
@ -2895,31 +2896,215 @@ static int mark_uninteresting(const struct object_id *oid,
return 0; return 0;
} }
struct topo_walk_info {}; define_commit_slab(indegree_slab, int);
define_commit_slab(author_date_slab, timestamp_t);
struct topo_walk_info {
uint32_t min_generation;
struct prio_queue explore_queue;
struct prio_queue indegree_queue;
struct prio_queue topo_queue;
struct indegree_slab indegree;
struct author_date_slab author_date;
};
static inline void test_flag_and_insert(struct prio_queue *q, struct commit *c, int flag)
{
if (c->object.flags & flag)
return;
c->object.flags |= flag;
prio_queue_put(q, c);
}
static void explore_walk_step(struct rev_info *revs)
{
struct topo_walk_info *info = revs->topo_walk_info;
struct commit_list *p;
struct commit *c = prio_queue_get(&info->explore_queue);
if (!c)
return;
if (parse_commit_gently(c, 1) < 0)
return;
if (revs->sort_order == REV_SORT_BY_AUTHOR_DATE)
record_author_date(&info->author_date, c);
if (revs->max_age != -1 && (c->date < revs->max_age))
c->object.flags |= UNINTERESTING;
if (process_parents(revs, c, NULL, NULL) < 0)
return;
if (c->object.flags & UNINTERESTING)
mark_parents_uninteresting(c);
for (p = c->parents; p; p = p->next)
test_flag_and_insert(&info->explore_queue, p->item, TOPO_WALK_EXPLORED);
}
static void explore_to_depth(struct rev_info *revs,
uint32_t gen_cutoff)
{
struct topo_walk_info *info = revs->topo_walk_info;
struct commit *c;
while ((c = prio_queue_peek(&info->explore_queue)) &&
c->generation >= gen_cutoff)
explore_walk_step(revs);
}
static void indegree_walk_step(struct rev_info *revs)
{
struct commit_list *p;
struct topo_walk_info *info = revs->topo_walk_info;
struct commit *c = prio_queue_get(&info->indegree_queue);
if (!c)
return;
if (parse_commit_gently(c, 1) < 0)
return;
explore_to_depth(revs, c->generation);
for (p = c->parents; p; p = p->next) {
struct commit *parent = p->item;
int *pi = indegree_slab_at(&info->indegree, parent);
if (*pi)
(*pi)++;
else
*pi = 2;
test_flag_and_insert(&info->indegree_queue, parent, TOPO_WALK_INDEGREE);
if (revs->first_parent_only)
return;
}
}
static void compute_indegrees_to_depth(struct rev_info *revs,
uint32_t gen_cutoff)
{
struct topo_walk_info *info = revs->topo_walk_info;
struct commit *c;
while ((c = prio_queue_peek(&info->indegree_queue)) &&
c->generation >= gen_cutoff)
indegree_walk_step(revs);
}
static void init_topo_walk(struct rev_info *revs) static void init_topo_walk(struct rev_info *revs)
{ {
struct topo_walk_info *info; struct topo_walk_info *info;
struct commit_list *list;
revs->topo_walk_info = xmalloc(sizeof(struct topo_walk_info)); revs->topo_walk_info = xmalloc(sizeof(struct topo_walk_info));
info = revs->topo_walk_info; info = revs->topo_walk_info;
memset(info, 0, sizeof(struct topo_walk_info)); memset(info, 0, sizeof(struct topo_walk_info));
limit_list(revs); init_indegree_slab(&info->indegree);
sort_in_topological_order(&revs->commits, revs->sort_order); memset(&info->explore_queue, 0, sizeof(info->explore_queue));
memset(&info->indegree_queue, 0, sizeof(info->indegree_queue));
memset(&info->topo_queue, 0, sizeof(info->topo_queue));
switch (revs->sort_order) {
default: /* REV_SORT_IN_GRAPH_ORDER */
info->topo_queue.compare = NULL;
break;
case REV_SORT_BY_COMMIT_DATE:
info->topo_queue.compare = compare_commits_by_commit_date;
break;
case REV_SORT_BY_AUTHOR_DATE:
init_author_date_slab(&info->author_date);
info->topo_queue.compare = compare_commits_by_author_date;
info->topo_queue.cb_data = &info->author_date;
break;
}
info->explore_queue.compare = compare_commits_by_gen_then_commit_date;
info->indegree_queue.compare = compare_commits_by_gen_then_commit_date;
info->min_generation = GENERATION_NUMBER_INFINITY;
for (list = revs->commits; list; list = list->next) {
struct commit *c = list->item;
if (parse_commit_gently(c, 1))
continue;
test_flag_and_insert(&info->explore_queue, c, TOPO_WALK_EXPLORED);
test_flag_and_insert(&info->indegree_queue, c, TOPO_WALK_INDEGREE);
if (c->generation < info->min_generation)
info->min_generation = c->generation;
*(indegree_slab_at(&info->indegree, c)) = 1;
if (revs->sort_order == REV_SORT_BY_AUTHOR_DATE)
record_author_date(&info->author_date, c);
}
compute_indegrees_to_depth(revs, info->min_generation);
for (list = revs->commits; list; list = list->next) {
struct commit *c = list->item;
if (*(indegree_slab_at(&info->indegree, c)) == 1)
prio_queue_put(&info->topo_queue, c);
}
/*
* This is unfortunate; the initial tips need to be shown
* in the order given from the revision traversal machinery.
*/
if (revs->sort_order == REV_SORT_IN_GRAPH_ORDER)
prio_queue_reverse(&info->topo_queue);
} }
static struct commit *next_topo_commit(struct rev_info *revs) static struct commit *next_topo_commit(struct rev_info *revs)
{ {
return pop_commit(&revs->commits); struct commit *c;
struct topo_walk_info *info = revs->topo_walk_info;
/* pop next off of topo_queue */
c = prio_queue_get(&info->topo_queue);
if (c)
*(indegree_slab_at(&info->indegree, c)) = 0;
return c;
} }
static void expand_topo_walk(struct rev_info *revs, struct commit *commit) static void expand_topo_walk(struct rev_info *revs, struct commit *commit)
{ {
if (process_parents(revs, commit, &revs->commits, NULL) < 0) { struct commit_list *p;
struct topo_walk_info *info = revs->topo_walk_info;
if (process_parents(revs, commit, NULL, NULL) < 0) {
if (!revs->ignore_missing_links) if (!revs->ignore_missing_links)
die("Failed to traverse parents of commit %s", die("Failed to traverse parents of commit %s",
oid_to_hex(&commit->object.oid)); oid_to_hex(&commit->object.oid));
} }
for (p = commit->parents; p; p = p->next) {
struct commit *parent = p->item;
int *pi;
if (parse_commit_gently(parent, 1) < 0)
continue;
if (parent->generation < info->min_generation) {
info->min_generation = parent->generation;
compute_indegrees_to_depth(revs, info->min_generation);
}
pi = indegree_slab_at(&info->indegree, parent);
(*pi)--;
if (*pi == 1)
prio_queue_put(&info->topo_queue, parent);
if (revs->first_parent_only)
return;
}
} }
int prepare_revision_walk(struct rev_info *revs) int prepare_revision_walk(struct rev_info *revs)

View File

@ -24,6 +24,8 @@
#define USER_GIVEN (1u<<25) /* given directly by the user */ #define USER_GIVEN (1u<<25) /* given directly by the user */
#define TRACK_LINEAR (1u<<26) #define TRACK_LINEAR (1u<<26)
#define ALL_REV_FLAGS (((1u<<11)-1) | USER_GIVEN | TRACK_LINEAR) #define ALL_REV_FLAGS (((1u<<11)-1) | USER_GIVEN | TRACK_LINEAR)
#define TOPO_WALK_EXPLORED (1u<<27)
#define TOPO_WALK_INDEGREE (1u<<28)
#define DECORATE_SHORT_REFS 1 #define DECORATE_SHORT_REFS 1
#define DECORATE_FULL_REFS 2 #define DECORATE_FULL_REFS 2