Split key function and data structure definitions out of cache.h to
new header files and adjust the users.
* en/header-split-cleanup:
csum-file.h: remove unnecessary inclusion of cache.h
write-or-die.h: move declarations for write-or-die.c functions from cache.h
treewide: remove cache.h inclusion due to setup.h changes
setup.h: move declarations for setup.c functions from cache.h
treewide: remove cache.h inclusion due to environment.h changes
environment.h: move declarations for environment.c functions from cache.h
treewide: remove unnecessary includes of cache.h
wrapper.h: move declarations for wrapper.c functions from cache.h
path.h: move function declarations for path.c functions from cache.h
cache.h: remove expand_user_path()
abspath.h: move absolute path functions from cache.h
environment: move comment_line_char from cache.h
treewide: remove unnecessary cache.h inclusion from several sources
treewide: remove unnecessary inclusion of gettext.h
treewide: be explicit about dependence on gettext.h
treewide: remove unnecessary cache.h inclusion from a few headers
If, when parsing numbers from config, die_bad_number() is called, it
reports the filename and config source type if we were parsing a config
file, but not if we were iterating a config_set (it defaults to a less
specific error message). Most call sites don't parse config files
because config is typically read once and cached, so we only report
filename and config source type in "git config --type" (since "git
config" always parses config files).
This could have been fixed when we taught the current_config_*
functions to respect config_set values (0d44a2dacc (config: return
configset value for current_config_ functions, 2016-05-26), but it was
hard to spot then and we might have just missed it (I didn't find
mention of die_bad_number() in the original ML discussion [1].)
Fix this by refactoring the current_config_* functions into variants
that don't BUG() when we aren't reading config, and using the resulting
functions in die_bad_number(). "git config --get[-regexp] --type=int"
cannot use the non-refactored version because it parses the int value
_after_ parsing the config file, which would run into the BUG().
Since the refactored functions aren't public, they use "struct
config_reader".
1. https://lore.kernel.org/git/20160518223712.GA18317@sigill.intra.peff.net/
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have the "git_configset_get_value_multi()" function and its siblings
return an "int" and populate a "**dest" parameter like every other
git_configset_get_*()" in the API.
As we'll take advantage of in subsequent commits, this fixes a blind
spot in the API where it wasn't possible to tell whether a list was
empty from whether a config key existed. For now we don't make use of
those new return values, but faithfully convert existing API users.
Most of this is straightforward, commentary on cases that stand out:
- To ensure that we'll properly use the return values of this function
in the future we're using the "RESULT_MUST_BE_USED" macro introduced
in [1].
As git_die_config() now has to handle this return value let's have
it BUG() if it can't find the config entry. As tested for in a
preceding commit we can rely on getting the config list in
git_die_config().
- The loops after getting the "list" value in "builtin/gc.c" could
also make use of "unsorted_string_list_has_string()" instead of using
that loop, but let's leave that for now.
- In "versioncmp.c" we now use the return value of the functions,
instead of checking if the lists are still non-NULL.
1. 1e8697b5c4 (submodule--helper: check repo{_submodule,}_init()
return values, 2022-09-01),
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have the basic "git_config_get_value()" function and its
"repo_*" and "configset" siblings to get a given "key" and assign the
last key found to a provided "value".
But some callers don't care about that value, but just want to use the
return value of the "get_value()" function to check whether the key
exist (or another non-zero return value).
The immediate motivation for this is that a subsequent commit will
need to change all callers of the "*_get_value_multi()" family of
functions. In two cases here we (ab)used it to check whether we had
any values for the given key, but didn't care about the return value.
The rest of the callers here used various other config API functions
to do the same, all of which resolved to the same underlying functions
to provide the answer.
Some of these were using either git_config_get_string() or
git_config_get_string_tmp(), see fe4c750fb1 (submodule--helper: fix a
configure_added_submodule() leak, 2022-09-01) for a recent example. We
can now use a helper function that doesn't require a throwaway
variable.
We could have changed git_configset_get_value_multi() (and then
git_config_get_value() etc.) to accept a "NULL" as a "dest" for all
callers, but let's avoid changing the behavior of existing API
users. Having an "unused" value that we throw away internal to
config.c is cheap.
A "NULL as optional dest" pattern is also more fragile, as the intent
of the caller might be misinterpreted if he were to accidentally pass
"NULL", e.g. when "dest" is passed in from another function.
Another name for this function could have been
"*_config_key_exists()", as suggested in [1]. That would work for all
of these callers, and would currently be equivalent to this function,
as the git_configset_get_value() API normalizes all non-zero return
values to a "1".
But adding that API would set us up to lose information, as e.g. if
git_config_parse_key() in the underlying configset_find_element()
fails we'd like to return -1, not 1.
Let's change the underlying configset_find_element() function to
support this use-case, we'll make further use of it in a subsequent
commit where the git_configset_get_value_multi() function itself will
expose this new return value.
This still leaves various inconsistencies and clobbering or ignoring
of the return value in place. E.g here we're modifying
configset_add_value(), but ever since it was added in [2] we've been
ignoring its "int" return value, but as we're changing the
configset_find_element() it uses, let's have it faithfully ferry that
"ret" along.
Let's also use the "RESULT_MUST_BE_USED" macro introduced in [3] to
assert that we're checking the return value of
configset_find_element().
We're leaving the same change to configset_add_value() for some future
series. Once we start paying attention to its return value we'd need
to ferry it up as deep as do_config_from(), and would need to make
least read_{,very_}early_config() and git_protected_config() return an
"int" instead of "void". Let's leave that for now, and focus on
the *_get_*() functions.
1. 3c8687a73e (add `config_set` API for caching config-like files, 2014-07-28)
2. https://lore.kernel.org/git/xmqqczadkq9f.fsf@gitster.g/
3. 1e8697b5c4 (submodule--helper: check repo{_submodule,}_init()
return values, 2022-09-01),
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By moving several declarations to setup.h, the previous patch made it
possible to remove the include of cache.h in several source files. Do
so.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75de (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b24034754 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callback passed to git_config() must conform to a particular
interface. But most callbacks don't actually look at the extra "void
*data" parameter. Let's mark the unused parameters to make
-Wunused-parameter happy.
Note there's one unusual case here in get_remote_default() where we
actually ignore the "value" parameter. That's because it's only checking
whether the option is found at all, and not parsing its value.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two functions to get a single config string:
- git_config_get_string()
- git_config_get_string_const()
One might naively think that the first one allocates a new string and
the second one just points us to the internal configset storage. But
in fact they both allocate a new copy; the second one exists only to
avoid having to cast when using it with a const global which we never
intend to free.
The documentation for the function explains that clearly, but it seems
I'm not alone in being surprised by this. Of 17 calls to the function,
13 of them leak the resulting value.
We could obviously fix these by adding the appropriate free(). But it
would be simpler still if we actually had a non-allocating way to get
the string. There's git_config_get_value() but that doesn't quite do
what we want. If the config key is present but is a boolean with no
value (e.g., "[foo]bar" in the file), then we'll get NULL (whereas the
string versions will print an error and die).
So let's introduce a new variant, git_config_get_string_tmp(), that
behaves as these callers expect. We need a new name because we have new
semantics but the same function signature (so even if we converted the
four remaining callers, topics in flight might be surprised). The "tmp"
is because this value should only be held onto for a short time. In
practice it's rare for us to clear and refresh the configset,
invalidating the pointer, but hopefully the "tmp" makes callers think
about the lifetime. In each of the converted cases here the value only
needs to last within the local function or its immediate caller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users are nowadays trained to see message from CLI tools in the form
<file>:<lno>: …
To be able to give such messages when notifying the user about
configurations in any config file, it is currently only possible to get
the file name (if the value originates from a file to begin with) via
`current_config_name()`. Now it is also possible to query the current line
number for the configuration.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To prepare for the upcoming --show-scope option, we require the ability
to convert a config_scope enum to a string. As this was originally
implemented as a static function 'scope_name()' in
t/helper/test-config.c, we expose it via config.h and give it a less
ambiguous name 'config_scope_name()'
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far, we had no explicit tests of that function.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were numerous corner cases in which the configuration files
are read and used or not read at all depending on the directory a
Git command was run, leading to inconsistent behaviour. The code
to set-up repository access at the beginning of a Git process has
been updated to fix them.
* jk/setup-sequence-update:
t1007: factor out repeated setup
init: reset cached config when entering new repo
init: expand comments explaining config trickery
config: only read .git/config from configured repos
test-config: setup git directory
t1302: use "git -C"
pager: handle early config
pager: use callbacks instead of configset
pager: make pager_program a file-local static
pager: stop loading git_default_config()
pager: remove obsolete comment
diff: always try to set up the repository
diff: handle --no-index prefixes consistently
diff: skip implicit no-index check when given --no-index
patch-id: use RUN_SETUP_GENTLY
hash-object: always try to set up the git repository
There are certain house-keeping tasks that need to be performed at
the very beginning of any Git program, and programs that are not
built-in commands had to do them exactly the same way as "git"
potty does. It was easy to make mistakes in one-off standalone
programs (like test helpers). A common "main()" function that
calls cmd_main() of individual program has been introduced to
make it harder to make mistakes.
* jk/common-main:
mingw: declare main()'s argv as const
common-main: call git_setup_gettext()
common-main: call restore_sigpipe_to_default()
common-main: call sanitize_stdfds()
common-main: call git_extract_argv0_path()
add an extra level of indirection to main()
A config callback passed to git_config() doesn't know very
much about the context in which it sees a variable. It can
ask whether the variable comes from a file, and get the file
name. But without analyzing the filename (which is hard to
do accurately), it cannot tell whether it is in system-level
config, user-level config, or repo-specific config.
Generally this doesn't matter; the point of not passing this
to the callback is that it should treat the config the same
no matter where it comes from. But some programs, like
upload-pack, are a special case: we should be able to run
them in an untrusted repository, which means we cannot use
any "dangerous" config from the repository config file (but
it is OK to use it from system or user config).
This patch teaches the config code to record the "scope" of
each variable, and make it available inside config
callbacks, similar to how we give access to the filename.
The scope is the starting source for a particular parsing
operation, and remains the same even if we include other
files (so a .git/config which includes another file will
remain CONFIG_SCOPE_REPO, as it would be similarly
untrusted).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 473166b (config: add 'origin_type' to config_source
struct, 2016-02-19) added accessor functions for the origin
type and name, it taught them only to look at the "cf"
struct that is filled in while we are parsing the config.
This is sufficient to make it work with git-config, which
uses git_config_with_options() under the hood. That function
freshly parses the config files and triggers the callback
when it parses each key.
Most git programs, however, use git_config(). This interface
will populate a cache during the actual parse, and then
serve values from the cache. Calling current_config_filename()
in a callback here will find a NULL cf and produce an error.
There are no such callers right now, but let's prepare for
adding some by making this work.
We already record source information in a struct attached to
each value. We just need to make it globally available and
then consult it from the accessor functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This keeps top dir a bit less crowded. And because these programs are
for testing purposes, it makes sense that they stay somewhere in t/
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
