* maint-1.6.2:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
diff.c
* maint-1.6.1:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
diff.c
* maint-1.6.0:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
The -a and -r options used to be silently ignored in such a command.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code just leaves the transport in whatever state
it was in after performing the fetch. For a non-empty clone
over the git protocol, the transport code already
disconnects at the end of the fetch.
But for an empty clone, we leave the connection hanging, and
eventually close the socket when clone exits. This causes
the remote upload-pack to complain "the remote end hung up
unexpectedly". While this message is harmless to the clone
itself, it is unnecessarily scary for a user to see and may
pollute git-daemon logs.
This patch just explicitly calls disconnect after we are
done with the remote end, which sends a flush packet to
upload-pack and cleanly disconnects, avoiding the error
message.
Other transports are unaffected or slightly improved:
- for a non-empty repo over the git protocol, the second
disconnect is a no-op (since we are no longer connected)
- for "walker" transports (like HTTP or FTP), we actually
free some used memory (which previously just sat until
the clone process exits)
- for "rsync", disconnect is always a no-op anyway
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 0392513 (add-interactive: refactor mode hunk handling, 2009-04-16),
we merged the interaction loops for mode changes and hunk staging.
This was fine at the time, because 0beee4c (git-add--interactive:
remove hunk coalescing, 2008-07-02) removed hunk coalescing.
However, in 7a26e65 (Revert "git-add--interactive: remove hunk
coalescing", 2009-05-16), we resurrected it. Since then, the code
would attempt in vain to merge mode changes with diff hunks,
corrupting both in the process.
We add a check to the coalescing loop to ensure it only looks at diff
hunks, thus skipping mode changes.
Noticed-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to stage changes to file which has also pending `chmod +x`,
`git add -p` produces lots of 'Use of uninitialized value ...' warnings
and fails to do the job:
$ echo content >> file
$ chmod +x file
$ git add -p
diff --git a/file b/file
index e69de29..d95f3ad
--- a/file
+++ b/file
old mode 100644
new mode 100755
Stage mode change [y,n,q,a,d,/,j,J,g,?]? y
@@ -0,0 +1 @@
+content
Stage this hunk [y,n,q,a,d,/,K,g,e,?]? y
Use of uninitialized value $o_ofs in addition (+) at .../git-add--interactive line 776.
Use of uninitialized value $ofs in numeric le (<=) at .../git-add--interactive line 806.
Use of uninitialized value $o0_ofs in concatenation (.) or string at .../git-add--interactive line 830.
Use of uninitialized value $n0_ofs in concatenation (.) or string at .../git-add--interactive line 830.
Use of uninitialized value $o_ofs in addition (+) at .../git-add--interactive line 776.
fatal: corrupt patch at line 5
diff --git a/file b/file
index e69de29..d95f3ad
--- a/file
+++ b/file
@@ -,0 + @@
+content
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test ignored the exit status from verify pack command, and also relied
on not seeing any delta chain statistics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Configuration values are expected to be quoted when they have leading or
trailing whitespace, but inner whitespace should be kept verbatim even if
the value is not quoted. This is already documented in git-config(1), but
the code caused inner whitespace to be collapsed to a single space,
breaking, for example, clones from a path that has two consecutive spaces
in it, as future fetches would only see a single space.
Reported-by: John te Bokkel <tanj.tanj@gmail.com>
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second and third tests of this script expected that Russian strings
are converted between ISO-8859-5 and Shift_JIS in the "blame --porcelain"
format output correctly.
Sure, many platforms may convert between such a combination, but that is
only because one of the base character set of Shift_JIS, JIS X 0208,
defines codepoints for Russian characters (among others); I do not think
anybody uses Shift_JIS when seriously writing Russian, and it is perfectly
understandable if iconv() libraries on some platforms fail converting
between this combination, as it does not matter in reality.
This patch changes the test to verify Japanese strings are converted
correctly between EUC-JP and Shift_JIS in the same procedure. The point
of the test is not about verifying the platform's iconv() library, but to
see if "git blame" makes correct iconv() library calls when it should.
We could instead use ISO-8859-5 and KOI8-R as the combination, because
they are both meant to represent Russian, in order to make this test
meaningful on more platforms, but we already use Shift_JIS vs EUC-JP
combinations to test other programs in our test suite, so this combination
is safer from the point of view of the portability. Besides, I do not
read nor write Russian; sorry ;-)
This change allows tests to pass on my (friend's) Solaris 5.11 box.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
735c674 (Trailing whitespace and no newline fix, 2009-07-22) completely
broke --whitespace=fix, causing it to lose all the empty lines in a patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a patch adds a new line to the end of a file and this line ends with
one trailing whitespace character and has no newline, then
'--whitespace=fix' currently does not remove that trailing whitespace.
This patch fixes this by removing the check for trailing whitespace at
the end of the line at a hardcoded offset which does not take the
eventual absence of newline into account.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When combine-diff inspected the diff from one parent to the merge result,
it misinterpreted a header in the form @@ -l,k +0,0 @@.
This hunk header means that K lines were removed from the beginning of the
file, so the lost lines must be queued to the sline that represents the
first line of the merge result, but we incremented our pointer incorrectly
and ended up queuing it to the second line, which in turn made the lossage
appear _after_ the first line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a small test case for git archive --remote (and thus
git-upload-archive), which so far went untested.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new test does a 'chmod 0', which does not have the intended
effect on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test wanted to make sure that cherry-pick exits with status 1,
but with the way it was placed after "git checkout master &&" meant
that it could have misjudged success if checkout barfed with the
same failure status.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't call git_config after parsing the command line options, otherwise
the config settings will override any settings made by the command line.
This can be seen by setting add.ignore_errors and then specifying
--no-ignore-errors when using git-add.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to see if the same path exists in the parent, we ran
"diff-tree" with pathspec set to the path we are interested in with the
parent, and expect either to have exactly one resulting filepair (either
"changed from the parent", "created when there was none") or nothing (when
there is no change from the parent).
If the path used to be a directory, however, we will also see unbounded
number of entries that talk about the files that used to exist underneath
the directory in question. Correctly pick only the entry that describes
the path we are interested in in such a case (namely, the creation of the
path as a regular file).
Noticed by Ben Willard.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/maint-1.6.0-xdl-merge-fix:
Change xdl_merge to generate output even for null merges
t6023: merge-file fails to output anything for a degenerate merge
Conflicts:
xdiff/xmerge.c
* jc/maint-add-p-coalesce-fix:
t3701: ensure correctly set up repository after skipped tests
Revert "git-add--interactive: remove hunk coalescing"
Splitting a hunk that adds a line at the top fails in "add -p"
The following is an easy mistake to make for users coming from version
control systems with an "update and commit"-style workflow.
1. git pull
2. resolve conflicts
3. git pull
Step 3 overrides MERGE_HEAD, starting a new merge with dirty index.
IOW, probably not what the user intended. Instead, refuse to merge
again if a merge is in progress.
Reported-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case of an empty list, the search for its tail caused a
NULL-pointer dereference.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Reported-by: Erik Faye-Lund <kusmabite@googlemail.com>
Acked-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two tests that are skipped if file modes are not obeyed by the
file system. In this case, the subsequent test failed because the
repository was in an unexpected state. This corrects it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xdl_merge used to have a check to ensure that there was at least
some change in one or other side being merged but this suppressed
output for the degenerate case when base, local and remote
contents were all identical.
Removing this check enables correct output in the degenerate case
and xdl_free_script handles freeing NULL scripts so there is no
need to have the check for these calls.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case that merge-file is passed three files with identical
contents it wipes the contents of the output file instead of
leaving it unchanged.
Althought merge-file is porcelain and this will never happen in
normal usage, it is still wrong.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After bol is forwarded, it doesn't represent the beginning of the line
any more. This means that the beginning-of-line marker (^) mustn't match,
i.e. the regex flag REG_NOTBOL needs to be set.
This bug was introduced by fb62eb7fab
("grep -w: forward to next possible position after rejected match").
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dbd0f5c7 (Files given on the command line are relative to $cwd,
2008-08-06) only fixed git-commit and git-tag. But, git-apply and
git-fmt-merge-msg didn't get the update and exhibit the same behavior.
Fix them and add tests for "apply --build-fake-ancestor" and
"fmt-merge-msg -F".
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dbd0f5c7 (Files given on the command line are relative to $cwd,
2008-08-06) introduced parse_options_fix_filename() as a quick fix for
filename arguments used in the parse options API.
git-commit was still broken. This means
git commit -F log -t temp
in a subdirectory would make git think the log message should be taken
from temp instead of log.
This is because parse_options_fix_filename() calls prefix_filename()
which uses a single static char buffer to do its work. Making two calls
with two char pointers causes the pointers to alias. To prevent
aliasing, we duplicate the string returned by
parse_options_fix_filename().
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 0beee4c6de but with a
bit of twist, as we have added "edit hunk manually" hack and we cannot
rely on the original line numbers of the hunks that were manually edited.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Splitting a hunk into two in add -p doesn't work for a diff that adds a
new line at the top of the file with other add in the same hunk.
Signed-off-by: Matthew Graham <mdg149@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exercise format-patch's --signoff, --in-reply-to and --start-number long
options.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic in 83ae209 (checkout branch: prime cache-tree fully,
2009-04-20) is bogus; checkout can switch branches with a dirty
index and in such a case the tree won't match HEAD.
Add t2014-switch to catch this breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
