Trivially refactor an assignment to make a subsequent patch
smaller. The "ref_nr" variable is initialized to 0 earlier, just as
"j" is, and "j" is only incremented in that loop, so this change isn't
a logic error.
This change simplifies a subsequent change, which will split the
incrementing of "ref_nr" into two blocks.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop redundantly NULL-ing the last element of the refs structure,
which was retrieved via calloc(), and is thus guaranteed to be
pre-NULL'd.
This code dates back to b888d61c83 ("Make fetch a builtin",
2007-09-10), where wasn't any reason to do this back then either, it's
just boilerplate left over from when git-fetch was initially
introduced.
The motivation for this change was to make a subsequent change which
would also modify the refs variable smaller, since it won't have to
copy this redundant "NULL the last + 1 item" pattern.
We may not end up keeping that change, but as this pattern is still
pointless, so let's fix it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We moved away from SHA1_HEADER to a preprocessor if chain, but didn't
update the comment discussing the platform defines. Update this comment
so it reflects the current state of our codebase.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit dd6fb0053 ("rebase -p: fix quoting when calling `git
merge`"), commit message of the merge commit being rebased is passed to
the merge command using a subshell executing 'git rev-parse --sq-quote'.
Double quotes are needed around this subshell so that, newlines are
kept for the git merge command.
Before this patch, following merge message:
"Merge mybranch into mynewbranch
Awesome commit."
becomes:
"Merge mybranch into mynewbranch Awesome commit."
after a rebase -p.
Fixes: "dd6fb0053 rebase -p: fix quoting when calling `git merge`"
Reported-by: Jamie Iles <jamie.iles@oracle.com>
Suggested-by: Vegard Nossum <vegard.nossum@oracle.com>
Suggested-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Gregory Herrero <gregory.herrero@oracle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It perhaps goes without saying that file-local stuff should
be marked static, but it does not hurt to remind people.
Less obvious is that we are settling on "do not include
extern in function declarations". It is already the default
unless the function was previously declared static (but if
you are following a static declaration with an unmarked one,
you should think about why you are declaring the thing
twice). And so it just becomes an extra noise-word in our
header files.
We used to give the opposite advice, so there are quite a
few "extern" markers in early Git code. But this at least
makes a concrete suggestion that we can follow going
forward.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The packet_read_line() function will die if it sees any
protocol or socket errors. But it will return NULL for a
flush packet; some callers which are not expecting this may
dereference NULL if they get an unexpected flush. This would
involve the other side breaking protocol, but we should
flag the error rather than segfault.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The packet_read_line() function dies if it gets an
unexpected EOF. It only returns NULL if we get a flush
packet (or technically, a zero-length "0004" packet, but
nobody is supposed to send those, and they are
indistinguishable from a flush in this interface).
Let's correct error messages which claim an unexpected EOF;
it's really an unexpected flush packet.
While we're here, let's also check "!line" instead of
"!len" in the second case. The two events should always
coincide, but checking "!line" makes it more obvious that we
are not about to dereference NULL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct the pointer arithmetic in adjust_dirname_case() so that it calls
find_dir_entry() with the correct string length. Previously passing in
"dir1/foo" would pass a length of 6 instead of the correct 4. This resulted in
find_dir_entry() never finding the entry and so the subsequent memcpy that would
fold the name to the version with the correct case never executed.
Add a test to validate the corrected behavior with name folding of directories.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'test_i18ngrep' can't find the expected pattern, it exits
completely silently; when its negated form does find the pattern that
shouldn't be there, it prints the matching line(s) but otherwise exits
without any error message. This leaves the developer puzzled about
what could have gone wrong.
Make 'test_i18ngrep' more informative on failure by printing an error
message including the invoked 'grep' command and the contents of the
file it had to scan through.
Note that this "dump the scanned file" part is not quite perfect, as
it dumps only the file specified as the function's last positional
parameter, thus assuming that there is only a single file parameter.
I think that's a reasonable assumption to make, one that holds true in
the current code base. And even if someone were to scan multiple
files at once in the future, the worst thing that could happen is that
the verbose error message won't include the contents of all those
files, only the last one. Alas, we can't really do any better than
this, because checking whether the other positional parameters match a
filename can result in false positives: 't3400-rebase.sh' and
't3404-rebase-interactive.sh' contain one test each, where the
'test_i18ngrep's pattern verbatimly matches a file in the trash
directory.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the previous patches in this series fixed bogus
'test_i18ngrep' invocations:
- Two invocations where the tested git command's standard output is
directly piped into 'test_i18ngrep'. While convenient, this is an
antipattern, because the pipe hides the git command's exit code,
and the test could continue even if the command exited with error.
- Two invocations that had neither a filename parameter nor anything
piped into their standard input, yet both managed to remain
unnoticed for years. A third similarly bogus invocation is
currently lurking in 'pu' for a couple of weeks now.
Prevent similar mistakes in the future by validating 'test_i18ngrep's
parameters requiring that
- The last parameter names an existing file to be read, effectively
forbidding piping into 'test_i18ngrep'.
Note that this change will also forbid cases where 'test_i18ngrep'
would legitimately read its standard input, e.g. when its standard
input is redirected from a file, or when a git command's standard
output is first written to an intermediate file, which is then
preprocessed by a non-git command before the results are piped
into 'test_i18ngrep'. See two of the previous patches for the
only such cases we had in our test suite. However, reliably
preventing the piping antipattern is arguably more important than
supporting these cases, which can be easily worked around by
opening the file directly or using an intermediate file anyway.
- There are at least two parameters, not including the optional '!'
to negate the pattern. This ought to catch corner cases when
'test_i18ngrep' looks for the name of an existing file on its
standard input; the above check would miss this case becase the
filename as pattern would be the last parameter.
Note that this is not quite perfect, as it doesn't account for any
'grep --options' given as parameters. However, doing so would be
far too complicated, considering that patterns can start with
dashes as well, and in the majority of the cases we don't use any
such options anyway.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both 'test_i18ncmp' and 'test_i18ngrep' helper functions are supposed
to be called from our test scripts, so they should be in
'test-lib-functions.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Redirecting 'test_i18ngrep's standard input from a file will interfere
with the linting that will be added in a later patch.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests in 't5510-fetch.sh' checks the output of 'git fetch'
using 'test_i18ngrep', and while doing so it prefilters the output
with 'grep' before piping the result into 'test_i18ngrep'.
This prefiltering is unnecessary, with the appropriate pattern
'test_i18ngrep' can do it all by itself. Furthermore, piping data
into 'test_i18ngrep' will interfere with the linting that will be
added in a later patch.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The primary purpose of three tests in 't4001-diff-rename.sh' is to
check rename detection in 'git status', but all three do so by running
'git status' upstream of a pipe, hiding its exit code. Consequently,
the test could continue even if 'git status' exited with error.
Use an intermediate file between 'git status' and 'test_i18ngrep' to
catch a potential failure of the former.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The primary purpose of 't6022-merge-rename.sh' is to test 'git merge',
but one of the tests runs it upstream of a pipe, hiding its exit code.
Consequently, the test could continue even if 'git merge' exited with
error.
Use an intermediate file between 'git merge' and 'test_i18ngrep' to
catch a potential failure of the former.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second 'test_i18ngrep' invocation in the test 'curl redirects
respect whitelist' is missing its filename parameter. This has
remained unnoticed since its introduction in f4113cac0 (http: limit
redirection to protocol-whitelist, 2015-09-22), because it would only
cause the test to fail if Git was built with a sufficiently old
libcurl version. The test's two ||-chained 'test_i18ngrep'
invocations are supposed to check that either one of the two patterns
is present in 'git clone's error message. As it happens, the first
invocation covers the error message from any reasonably up-to-date
libcurl, thus the second invocation, the one without the filename
parameter, isn't executed at all. Apparently no one has run the test
suite's httpd tests with such an old libcurl in the last 2+ years, or
at least they haven't bothered to notify us about the failed test.
Fix this by consolidating the two patterns into a single extended
regexp, eliminating the need for an ||-chained second 'test_i18ngrep'
invocation.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test 'push --no-progress silences progress but not status' runs
'test_i18ngrep' without specifying a filename parameter. This has
remained unnoticed since its introduction in e304aeba2 (t5541: test
more combinations of --progress, 2012-05-01), because that
'test_i18ngrep' is supposed to check that the given pattern is not
present in its input, and of course it won't find that pattern if its
input is empty (as it comes from /dev/null). This also means that
this test could miss a potential breakage of 'git push --no-progress'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "make NO_GETTEXT=1 GETTEXT_POISON=1" currently fails
t0205.
While it might seem nonsensical at first glance to both
poison and disable gettext, it's useful to be able to do a
poison test-run on a system that doesn't have gettext at
all. And it works fine for C programs; the problem is only
with the shell code.
The issue is that we check the baked-in USE_GETTEXT_SCHEME
value before GETTEXT_POISON. And when NO_GETTEXT is set, the
Makefile sets USE_GETTEXT_SCHEME to "fallthrough".
So one fix would be to have the Makefile just set
USE_GETTEXT_SCHEME to "poison" if GETTEXT_POISON is set.
But there are two problems with that:
1. USE_GETTEXT_SCHEME is actually a user-facing knob, so
conceivably somebody could override it with:
make USE_GETTEXT_SCHEME=gnu GETTEXT_POISON=1
which would do the wrong thing (though that's much less
likely than them having the variable set in their
config.mak and just overriding GETTEXT_POISON on the
command-line for a one-off test).
2. We don't actually bake GETTEXT_POISON in to the shell
library like we do for the C code. It checks
$GIT_GETTEXT_POISON at runtime, which is set up by the
test suite. So it makes sense to put the fix in the
runtime code, too, which would cover something like:
GIT_GETTEXT_POISON=foo git foo
It's not likely that people use the poison code outside
of running the test suite, but it's easy enough to make
this case work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check that a shell variable is non-empty, and then we
check that it's equal to a particular value. Just checking
the latter covers both cases.
I suspect the original was trying to give better output when
the test fails, but using "-x" covers that these days.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --edit option whichs allows modifying the messages provided by -m or -F,
the same way git commit --edit does.
Signed-off-by: Nicolas Morey-Chaisemartin <NMoreyChaisemartin@suse.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line parser of "git blame" is prepared to take an
ancient odd argument order "blame <path> <rev>" in addition to the
usual "blame [<rev>] <path>". It has at least two negative
ramifications:
- In order to tell these two apart, it checks if the last command
line argument names a path in the working tree, using
file_exists(). However, "blame <rev> <path>" is a request to
explain each and every line in the contents of <path> stored in
revision <rev> and does not need to have a working tree version
of the file. A check with file_exists() is simply wrong.
- To coerce that mistaken file_exists() check to work, the code
calls setup_work_tree() before doing so, because the path it has
is relative to the top-level of the project tree. However,
"blame <rev> <path>" MUST be usable even in a bare repository,
and there is no reason for letting setup_work_tree() complain
and die with "This operation must be run in a work tree".
To correct the former, switch to check if the last token is a
revision (and if so, parse arguments using "blame <path> <rev>"
rule). Correct the latter by getting rid of setup_work_tree() and
file_exists() check--the only case the call to this function matters
is when we are running "blame <path>" (i.e. no starting revision and
asking to blame the working tree file at <path>, digging through the
HEAD revision), but there is a call in setup_scoreboard() just
before it calls fake_working_tree_commit().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_directory() code ignores all paths named ".git" even if it's not
a valid git repository. See treat_path() for details. Since ".git" is
basically invisible to read_directory(), when we are asked to
invalidate a path that contains ".git", we can safely ignore it
because the slow path would not consider it anyway.
This helps when fsmonitor is used and we have a real ".git" repo at
worktree top. Occasionally .git/index will be updated and if the
fsmonitor hook does not filter it, untracked cache is asked to
invalidate the path ".git/index".
Without this patch, we invalidate the root directory unncessarily,
which:
- makes read_directory() fall back to slow path for root directory
(slower)
- makes the index dirty (because UNTR extension is updated). Depending
on the index size, writing it down could also be slow.
A note about the new "safe_path" knob. Since this new check could be
relatively expensive, avoid it when we know it's not needed. If the
path comes from the index, it can't contain ".git". If it does
contain, we may be screwed up at many more levels, not just this one.
Noticed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a127331cd (mv: allow moving nested submodules,
2016-04-19), introduced
if (show_only) continue;
in this for-loop before
if (!show_only)
which became redundant, because it is now always true.
Signed-off-by: Stefan Moch <stefanmoch@mail.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure that "git mv --dry-run" does not move file.
Signed-off-by: Stefan Moch <stefanmoch@mail.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option allows commits with empty commit messages to be rebased,
matching the same option in git-commit and git-cherry-pick. While empty
log messages are frowned upon, sometimes one finds them in older
repositories (e.g. translated from another VCS [0]), or have other
reasons for desiring them. The option is available in git-commit and
git-cherry-pick, so it is natural to make other git tools play nicely
with them. Adding this as an option allows the default to be "give the
user a chance to fix", while not interrupting the user's workflow
otherwise [1].
[0]: https://stackoverflow.com/q/8542304
[1]: https://public-inbox.org/git/7vd33afqjh.fsf@alter.siamese.dyndns.org/
To implement this, add a new --allow-empty-message flag. Then propagate
it to all calls of 'git commit', 'git cherry-pick', and 'git rebase--helper'
within the rebase scripts.
Signed-off-by: Genki Sky <sky@genki.is>
Reviewed-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The untracked cache saves its current state in the UNTR index extension.
Currently, _any_ change to that state causes the index to be flagged as dirty
and written out to disk. Unfortunately, the cost to write out the index can
exceed the savings gained by using the untracked cache. Since it is a cache
that can be updated from the current state of the working directory, there is
no functional requirement that the index be written out for every change to the
untracked cache.
Update the untracked cache logic so that it no longer forces the index to be
written to disk except in the case where the extension is being turned on or
off. When some other git command requires the index to be written to disk, the
untracked cache will take advantage of that to save it's updated state as well.
This results in a performance win when looked at over common sequences of git
commands (ie such as a status followed by add, commit, etc).
After this patch, all the logic to track statistics for the untracked cache
could be removed as it is only used by debug tracing used to debug the untracked
cache.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option can be used to override the implicit --syslog of
--inetd, or to disable all logging. (While --detach also implies
--syslog, --log-destination=stderr with --detach is useless since
--detach disassociates the process from the original stderr.) --syslog
is retained as an alias for --log-destination=syslog.
--log-destination always overrides implicit --syslog regardless of
option order. This is different than the “last one wins” logic that
applies to some implicit options elsewhere in Git, but should hopefully
be less confusing. (I also don’t know if *all* implicit options in Git
follow “last one wins”.)
The combination of --inetd with --log-destination=stderr is useful, for
instance, when running `git daemon` as an instanced systemd service
(with associated socket unit). In this case, log messages sent via
syslog are received by the journal daemon, but run the risk of being
processed at a time when the `git daemon` process has already exited
(especially if the process was very short-lived, e.g. due to client
error), so that the journal daemon can no longer read its cgroup and
attach the message to the correct systemd unit (see systemd/systemd#2913
[1]). Logging to stderr instead can solve this problem, because systemd
can connect stderr directly to the journal daemon, which then already
knows which unit is associated with this stream.
[1]: https://github.com/systemd/systemd/issues/2913
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Lucas Werkmeister <mail@lucaswerkmeister.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
353d84c537 (coccicheck: make transformation for strbuf_addf(sb, "...")
more precise) added a check to avoid transforming calls with format
strings which contain percent signs, as that would change the result.
It uses embedded Python code for that. Simplify this rule by using the
regular expression matching operator instead.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
reset --hard currently uses its own logic for printing the first line of
the commit message in its output. Instead of just using the first line,
use the pretty machinery to create the output.
In addition to the easier to follow code, this makes the output more
consistent with other commands that print the title of the commit, such
as 'git commit --oneline' or 'git checkout', which both use
'pp_commit_easy()' with the CMIT_FMT_ONELINE modifier.
It is a slight change of the output if the second line of the commit
message is not a blank line, i.e. if the commit message is
foo
bar
previously we would print "HEAD is now at 000000 foo", while after
this change we print "HEAD is now at 000000 foo bar", same as 'git log
--oneline' shows "000000 foo bar".
So this does make the output more consistent with other commands, and
'reset' is a porcelain command, so nobody should be parsing the output
in scripts.
The current behaviour dates back to 0e5a7faa3a ("Make "git reset" a
builtin.", 2007-09-11), so I assume (without digging into the old
codebase too much) that the logic was implemented because there was
no convenience function such as 'pp_commit_easy' that would do this
already.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is much easier to diff the output against a previous
one when the fields are sorted.
Helped-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easier to use the aggregate script
on the command line when one wants to get the
"environment" fields set in the codespeed output.
Previously setting GIT_REPO_NAME was needed
for this purpose.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easier to use the aggregate script
on the command line, to get results from
subsections.
Previously setting GIT_PERF_SUBSECTION was needed
for this purpose.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert uses of the direct SHA-1 functions to use the_hash_algo instead.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert several direct uses of SHA-1 to use the_hash_algo instead.
Convert one use of the constant 20 as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename struct sha1file to struct hashfile, along with all of its related
functions.
The transformation in this commit was made by global search-and-replace.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert various uses of direct calls to SHA-1 and 20- and 40-based
constants to use the_hash_algo instead. Don't yet convert the on-disk
data structures, which will be handled in a future commit.
Adjust some comments so as not to refer explicitly to SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert various uses of hardcoded 20- and 40-based numbers to use
the_hash_algo, along with direct calls to SHA-1. Adjust the names of
variables to refer to "hash" instead of "sha1".
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert various explicit calls to use SHA-1 functions and constants to
references to the_hash_algo. Make several strings more generic with
respect to the hash algorithm used.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch various uses of explicit calls to SHA-1 to use the_hash_algo.
Convert various uses of 20 and the GIT_SHA1 constants as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch various uses of explicit calls to SHA-1 into references to
the_hash_algo for better abstraction. Convert some calls to use struct
object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch various uses of explicit calls to SHA-1 into references to
the_hash_algo to better abstract away the various uses of it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert several uses of unsigned char [20] to struct object_id and
convert various hard-coded constants and uses of SHA-1 functions to use
the_hash_algo.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In various parts of our code, we want to allocate a structure
representing the internal state of a hash algorithm. The original
implementation of the hash algorithm abstraction assumed we would do
that using heap allocations, and added a context size element to struct
git_hash_algo. However, most of the existing code uses stack
allocations and conversion would needlessly complicate various parts of
the code. Add a union for the purpose of allocating hash contexts on
the stack and a typedef for ease of use. Use this union for defining
the init, update, and final functions to avoid casts. Remove the ctxsz
element for struct git_hash_algo, which is no longer very useful.
This does mean that stack allocations will grow slightly as additional
hash functions are added, but this should not be a significant problem,
since we don't allocate many hash contexts. The improved usability and
benefits from avoiding dynamic allocation outweigh this small downside.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the other code dealing with SHA-1 and other hashes is located in
hash.h, which is in turn loaded by cache.h. Move the SHA-1 macros to
hash.h as well, so we can use them in additional hash-related items in
the future.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the known heavy code blocks are measured (except object database
access). This should help identify if an optimization is effective or
not. An unoptimized git-status would give something like below:
0.001791141 s: read cache ...
0.004011363 s: preload index
0.000516161 s: refresh index
0.003139257 s: git command: ... 'status' '--porcelain=2'
0.006788129 s: diff-files
0.002090267 s: diff-index
0.001885735 s: initialize name hash
0.032013138 s: read directory
0.051781209 s: git command: './git' 'status'
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`fnmatch(3)` is a great mention if the intended audience is
programmers. For normal users it's probably better to spell out what
a shell glob is.
This paragraph is updated to roughly tell (or remind) what the main
wildcards are supposed to do. All the details are still hidden away
behind the `fnmatch(3)` wall because bringing the whole specification
here may be too much.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patches generated by format-patch are meant to be exchanged as emails,
most of the time. And since it's generally agreed that text in mails
should be wrapped around 70 columns or so, make sure these diffstat
follow the convention (especially when used with --cover-letter since we
already defaults to wrapping 72 columns). The default can still be
overriden with command line options.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A follow-up to the recently fixed bugs in the untracked
invalidation. If opendir() fails it should show a warning, perhaps
this should die, but if this ever happens the error is probably
recoverable for the user, and dying would just make things worse.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an EXPENSIVE_ON_WINDOWS prerequisite to mark those tests which are
very expensive to run on Windows, but cheap elsewhere.
Certain tests that heavily stress the filesystem or run a lot of shell
commands are disproportionately expensive on Windows, this
prerequisite will later be used by a tests that runs in 4-8 seconds on
a modern Linux system, but takes almost 10 minutes on Windows.
There's no reason to skip such tests by default on other platforms,
but Windows users shouldn't need to wait around while they finish.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
