There are multiple issues at play here:
1) If `git merge` is invoked with staged changes, it should abort
without doing any merging, and the user's working tree and index
should be the same as before merge was invoked.
2) Merge strategies are responsible for enforcing the index == HEAD
requirement. (See 9822175d2b ("Ensure index matches head before
invoking merge machinery, round N", 2019-08-17) for some history
around this.)
3) Merge strategies can bail saying they are not an appropriate
handler for the merge in question (possibly allowing other
strategies to be used instead).
4) Merge strategies can make changes to the index and working tree,
and have no expectation to clean up after themselves, *even* if
they bail out and say they are not an appropriate handler for
the merge in question. (The `octopus` merge strategy does this,
for example.)
5) Because of (3) and (4), builtin/merge.c stashes state before
trying merge strategies and restores it afterward.
Unfortunately, if users had staged changes before calling `git merge`,
builtin/merge.c could do the following:
* stash the changes, in order to clean up after the strategies
* try all the merge strategies in turn, each of which report they
cannot function due to the index not matching HEAD
* restore the changes via "git stash apply"
But that last step would have the net effect of unstaging the user's
changes. Fix this by adding the "--index" option to "git stash apply".
While at it, also squelch the stash apply output; we already report
"Rewinding the tree to pristine..." and don't need a detailed `git
status` report afterwards. Also while at it, switch to using strvec
so folks don't have to count the arguments to ensure we avoided an
off-by-one error, and so it's easier to add additional arguments to
the command.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are stat-dirty files, but no files are modified,
`git stash create` exits with unsuccessful status. This causes merge
to fail. Copy some code from sequencer.c's create_autostash to refresh
the index first to avoid this problem.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/merge is setup to allow multiple strategies to be specified,
and it will find the "best" result and use it. This is defeated if
some of the merge strategies abort early when they cannot handle the
merge. Fix the logic that calls recursive and ort to not do such an
early abort, but instead return "2" or "unhandled" so that the next
strategy can try to handle the merge.
Coming up with a testcase for this is somewhat difficult, since
recursive and ort both handle nearly any two-headed merge (there is
a separate code path that checks for non-two-headed merges and
already returns "2" for them). So use a somewhat synthetic testcase
of having the index not match HEAD before the merge starts, since all
merge strategies will abort for that.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in the last commit and the links therein (especially commit
9822175d2b ("Ensure index matches head before invoking merge machinery,
round N", 2019-08-17), we have had a very long history of problems with
failing to enforce the requirement that index matches HEAD when starting
a merge.
The "trivial merge" logic in builtin/merge.c is yet another such case
we previously missed. Add a check for it to ensure it aborts if the
index does not match HEAD, and add a testcase where this fix is needed.
Note that the fix here would also incidentally be an alternative fix
for the testcase added in the last patch, but the fix in the last patch
is still needed when multiple merge strategies are in use, so tweak the
testcase from the previous commit so that it continues to exercise the
codepath added in the last commit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in commit 9822175d2b ("Ensure index matches head before
invoking merge machinery, round N", 2019-08-17), we have had a very
long history of problems with failing to enforce the requirement that
index matches HEAD when starting a merge. One of the commits
referenced in the long tale of issues arising from lax enforcement of
this requirement was commit 55f39cf755 ("merge: fix misleading
pre-merge check documentation", 2018-06-30), which tried to document
the requirement and noted there were some exceptions. As mentioned in
that commit message, the `resolve` strategy was the one strategy that
did not have an explicit index matching HEAD check, and the reason it
didn't was that I wasn't able to discover any cases where the
implementation would fail to catch the problem and abort, and didn't
want to introduce unnecessary performance overhead of adding another
check.
Well, today I discovered a testcase where the implementation does not
catch the problem and so an explicit check is needed. Add a testcase
that previously would have failed, and update git-merge-resolve.sh to
have an explicit check. Note that the code is copied from 3ec62ad9ff
("merge-octopus: abort if index does not match HEAD", 2016-04-09), so
that we reuse the same message and avoid making translators need to
translate some new message.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the index does not match HEAD, the merge strategies are responsible
to detect that condition and abort. The merge-ort-wrappers had code to
implement this and meant to copy the error message from merge-recursive
but deviated in two ways, both due to the message in merge-recursive
being processed by another function that made additional changes:
* It added an implicit "error: " prefix
* It added an implicit trailing newline
We can get these things by making use of the error() function.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When callers are using `cat-file` via one of the stdin-driven `--batch`
modes, all input is newline-delimited. This presents a problem when
callers wish to ask about, e.g. tree-entries that have a newline
character present in their filename.
To support this niche scenario, introduce a new `-z` mode to the
`--batch`, `--batch-check`, and `--batch-command` suite of options that
instructs `cat-file` to treat its input as NUL-delimited, allowing the
individual commands themselves to have newlines present.
The refactoring here is slightly unfortunate, since we turn loops like:
while (strbuf_getline(&buf, stdin) != EOF)
into:
while (1) {
int ret;
if (opt->nul_terminated)
ret = strbuf_getline_nul(&input, stdin);
else
ret = strbuf_getline(&input, stdin);
if (ret == EOF)
break;
}
It's tempting to think that we could use `strbuf_getwholeline()` and
specify either `\n` or `\0` as the terminating character. But for input
on platforms that include a CR character preceeding the LF, this
wouldn't quite be the same, since `strbuf_getline(...)` will trim any
trailing CR, while `strbuf_getwholeline(&buf, stdin, '\n')` will not.
In the future, we could clean this up further by introducing a variant
of `strbuf_getwholeline()` that addresses the aforementioned gap, but
that approach felt too heavy-handed for this pair of uses.
Some tests are added in t1006 to ensure that `cat-file` produces the
same output in `--batch`, `--batch-check`, and `--batch-command` modes
with and without the new `-z` option.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future commit will want to ensure that various `--batch`-related
options produce the same output whether their input is newline
terminated, or NUL terminated (and a to-be-implemented `-z` option
exists).
To prepare for this, extract the given input(s) into separate variables
to that their LF characters can easily be converted into NUL bytes when
testing the new `-z` mode.
This is consistent with other tests in t1006 (which these days is no
longer a shining example of our CodingGuidelines).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is no index file, e.g., because the repository has just been
created, we return zero early (unless `must_exist` makes us die
instead.)
This early return means we do not set up `istate->repo`. With
`core.untrackedCache=true`, the recent e6a653554b ("untracked-cache:
support '--untracked-files=all' if configured", 2022-03-31) will
eventually pass down `istate->repo` as a null pointer to
`repo_config_get_string()`, causing a segmentation fault.
If we do hit this early return, set up `istate->repo` similar to when we
actually read the index.
Reported-by: Joey Hess <id@joeyh.name>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ec9a37d ("pkt-line.[ch]: remove unused packet_read_line_buf()",
2021-10-14) removed the "src_buffer" and "src_len" parameters from
packet_read(), only leaving them at packet_read_with_status(). Let's
also update the function documentation by moving the comment about these
parameters from the former to the latter.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function p4CmdList executes a Perforce command and
decodes the marshalled python dictionary. Special care has to be
taken for certain dictionary values which contain non-unicode characters.
The old handling contained separate hacks for each of the corresponding
dictionary keys. This commit tries to refactor the coding to handle the
special cases uniformely.
Signed-off-by: Kilian Kilger <kkilger@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 4a4b4cda (builtin-remote: Make "remote -v" display push urls,
2009-06-13), the string_list that was initialized with 0 in its
strdup_string member is immediately made to strdup its key strings
by flipping the strdup_string member to true. When 183113a5
(string_list: Add STRING_LIST_INIT macro and make use of it.,
2010-07-04) has introduced STRING_LIST_INIT macros, it mechanically
replaced the initialization to STRING_LIST_INIT_NODUP.
Instead, just use the other initialization macro to make it strdup
the key from the beginning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error handling code path is meant to be triggered when the loop does
not exit early via "break". This fails, as the boolean variable "found",
which is used to track whether the loop was exited early, is initialized
incorrectly.
It would be possible to fix this issue by correcting the initialization,
but Python supports a for:-else: control flow construct for this exact
use case (executing code if a loop does not exit early), so it is more
idiomatic to remove the tracking variable entirely.
In addition, the error message no longer refers to a variable that does
not exist.
Signed-off-by: Moritz Baumann <moritz.baumann@sap.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perforce silently replaces LF with CR LF for "utf16" files if the client
is a native Windows client. Since git's autocrlf logic does not undo
this transformation for UTF-16 encoded files, git-p4 replaces CR LF with
LF during the sync if the file type "utf16" is detected and the Perforce
client platform indicates that this conversion is performed.
Windows only runs on little-endian architectures, therefore the encoding
of the byte stream received from the Perforce client is UTF-16-LE and
the relevant byte sequence is 0D 00 0A 00.
Signed-off-by: Moritz Baumann <moritz.baumann@sap.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, HTTP transport clients learned to tell the server side
what locale they are in by sending Accept-Language HTTP header, but
this was done only for some requests but not others.
* ll/curl-accept-language:
remote-curl: send Accept-Language header to server
An earlier attempt to plug leaks placed a clean-up label to jump to
at a bogus place, which as been corrected.
* jk/diff-files-cleanup-fix:
diff-files: move misplaced cleanup label
A coccinelle rule (in contrib/) to encourage use of COPY_ARRAY
macro has been improved.
* rs/cocci-array-copy:
cocci: avoid normalization rules for memcpy
"git clone" from a repository with some ref whose HEAD is unborn
did not set the HEAD in the resulting repository correctly, which
has been corrected.
* jk/clone-unborn-confusion:
clone: move unborn head creation to update_head()
clone: use remote branch if it matches default HEAD
clone: propagate empty remote HEAD even with other branches
clone: drop extra newline from warning message
A corner case bug where lazily fetching objects from a promisor
remote resulted in infinite recursion has been corrected.
* hx/lookup-commit-in-graph-fix:
t5330: remove run_with_limited_processses()
commit-graph.c: no lazy fetch in lookup_commit_in_graph()
The resolve-undo information in the index was not protected against
GC, which has been corrected.
* jc/resolve-undo:
fsck: do not dereference NULL while checking resolve-undo data
revision: mark blobs needed for resolve-undo as reachable
The 'win build' job of our CI build is failing with the following error:
compat/win32/syslog.c: In function 'syslog':
compat/win32/syslog.c:53:17: error: pointer 'pos' may be used after \
'realloc' [-Werror=use-after-free]
53 | memmove(pos + 2, pos + 1, strlen(pos));
CC compat/poll/poll.o
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compat/win32/syslog.c:47:23: note: call to 'realloc' here
47 | str = realloc(str, st_add(++str_len, 1));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
However, between this realloc() and the use we have a line that resets
the value of 'pos'. Thus, this error is incorrect. It is likely due to a
new version of the compiler on the CI machines.
Instead of waiting for a new compiler, create a new variable to avoid
this error.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user runs 'git rebase -i --update-refs', the end message still
says only
Successfully rebased and updated <HEAD-ref>.
Update the sequencer to collect the successful (and unsuccessful) ref
updates due to the --update-refs option, so the end message now says
Successfully rebased and updated <HEAD-ref>.
Updated the following refs with --update-refs:
refs/heads/first
refs/heads/third
Failed to update the following refs with --update-refs:
refs/heads/second
To test this output, we need to be very careful to format the expected
error to drop the leading tab characters. Also, we need to be aware that
the verbose output from 'git rebase' is writing progress lines which
don't use traditional newlines but clear the line after every progress
item is complete. When opening the error file in an editor, these lines
are visible, but when looking at the diff in a terminal those lines
disappear because of the characters that delete the previous characters.
Use 'sed' to clear those progress lines and clear the tabs so we can get
an exact match on our expected output.
Reported-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the 'git rebase -i --update-refs' option, the todo list is
populated with 'update-ref' commands for all tip refs in the history
that is being rebased. Refs that are checked out by some worktree are
instead added as a comment to warn the user that they will not be
updated.
Until now, this included the HEAD ref, which is being updated by the
rebase process itself, regardless of the --update-refs option. Remove
the comment in this case by ignoring any decorations that match the HEAD
ref.
Reported-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change added the --update-refs command-line option. For
users who always want this mode, create the rebase.updateRefs config
option which behaves the same way as rebase.autoSquash does with the
--autosquash option.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An interactive rebase provides opportunities for the user to edit the
todo list. The --update-refs option initializes the list with some
'update-ref <ref>' steps, but the user could add these manually.
Further, the user could add or remove these steps during pauses in the
interactive rebase.
Add a new method, todo_list_filter_update_refs(), that scans a todo_list
and compares it to the stored update-refs file. There are two actions
that can happen at this point:
1. If a '<ref>/<before>/<after>' triple in the update-refs file does not
have a matching 'update-ref <ref>' command in the todo-list _and_ the
<after> value is the null OID, then remove that triple. Here, the
user removed the 'update-ref <ref>' command before it was executed,
since if it was executed then the <after> value would store the
commit at that position.
2. If a 'update-ref <ref>' command in the todo-list does not have a
matching '<ref>/<before>/<after>' triple in the update-refs file,
then insert a new one. Store the <before> value to be the current
OID pointed at by <ref>. This is handled inside of the
init_update_ref_record() helper method.
We can test that this works by rewriting the todo-list several times in
the course of a rebase. Check that each ref is locked or unlocked for
updates after each todo-list update. We can also verify that the ref
update fails if a concurrent process updates one of the refs after the
rebase process records the "locked" ref location.
To help these tests, add a new 'set_replace_editor' helper that will
replace the todo-list with an exact file.
Reported-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change introduced the 'git rebase --update-refs' option
which added 'update-ref <ref>' commands to the todo list of an
interactive rebase.
Teach Git to record the HEAD position when reaching these 'update-ref'
commands. The ref/before/after triple is stored in the
$GIT_DIR/rebase-merge/update-refs file. A previous change parsed this
file to avoid having other processes updating the refs in that file
while the rebase is in progress.
Not only do we update the file when the sequencer reaches these
'update-ref' commands, we then update the refs themselves at the end of
the rebase sequence. If the rebase is aborted before this final step,
then the refs are not updated. The 'before' value is used to ensure that
we do not accidentally obliterate a ref that was updated concurrently
(say, by an older version of Git or a third-party tool).
Now that the 'git rebase --update-refs' command is implemented to write
to the update-refs file, we can remove the fake construction of the
update-refs file from a test in t2407-worktree-heads.sh.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working on a large feature, it can be helpful to break that feature
into multiple smaller parts that become reviewed in sequence. During
development or during review, a change to one part of the feature could
affect multiple of these parts. An interactive rebase can help adjust
the multi-part "story" of the branch.
However, if there are branches tracking the different parts of the
feature, then rebasing the entire list of commits can create commits not
reachable from those "sub branches". It can take a manual step to update
those branches.
Add a new --update-refs option to 'git rebase -i' that adds 'update-ref
<ref>' steps to the todo file whenever a commit that is being rebased is
decorated with that <ref>. At the very end, the rebase process updates
all of the listed refs to the values stored during the rebase operation.
Be sure to iterate after any squashing or fixups are placed. Update the
branch only after those squashes and fixups are complete. This allows a
--fixup commit at the tip of the feature to apply correctly to the sub
branch, even if it is fixing up the most-recent commit in that part.
This change update the documentation and builtin to accept the
--update-refs option as well as updating the todo file with the
'update-ref' commands. Tests are added to ensure that these todo
commands are added in the correct locations.
This change does _not_ include the actual behavior of tracking the
updated refs and writing the new ref values at the end of the rebase
process. That is deferred to a later change.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the boilerplate for an "update-ref" command in the sequencer. This
connects to the current no-op do_update_ref() which will be filled in
after more connections are created.
The syntax in the todo list will be "update-ref <ref-name>" to signal
that we should store the current commit as the value for updating
<ref-name> at the end of the rebase.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The todo_command_info array defines which strings match with which
todo_command enum values. The array is defined in the same order as the
enum values, but if one changed without the other, then we would have
unexpected results.
Make it easier to see changes to the enum and this array by using the
enum values as the indices of the array.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'merge' command description for the todo list documentation in an
interactive rebase has multiple lines. The lines other than the first
one start with dots ('.') while the similar multi-line documentation for
'fixup' does not. This description only appears in the comment text of
the todo file during an interactive rebase.
The 'merge' command was documented when interactive rebase was first
ported to C in 145e05ac44 (rebase -i: rewrite append_todo_help() in C,
2018-08-10). These dots might have been carried over from the previous
shell implementation.
The 'fixup' command was documented more recently in 9e3cebd97c (rebase
-i: add fixup [-C | -c] command, 2021-01-29).
Looking at the output in an editor, my personal opinion is that the dots
are unnecessary and noisy. Remove them now before adding more commands
with multi-line documentation.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The branch_checked_out() helper helps commands like 'git branch' and
'git fetch' from overwriting refs that are currently checked out in
other worktrees.
A future update to 'git rebase' will introduce a new '--update-refs'
option which will update the local refs that point to commits that are
being rebased. To avoid collisions as the rebase completes, we want to
make the future data store for these refs to be considered by
branch_checked_out().
The data store is a plaintext file inside the 'rebase-merge' directory
for that worktree. The file lists refnames followed by two OIDs, each on
separate lines. The OIDs will be used to store the original values of
the refs and the to-be-written values as the rebase progresses, but can
be ignored at the moment.
Create a new sequencer_get_update_refs_state() method that parses this
file and populates a struct string_list with the ref-OID pairs. We can
then use this list to add to the current_checked_out_branches strmap
used by branch_checked_out().
To properly navigate to the rebase directory for a given worktree,
extract the static strbuf_worktree_gitdir() method to a public API
method.
We can test that this works without having Git write this file by
artificially creating one in our test script, at least until 'git rebase
--update-refs' is implemented and we can use it directly.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests in t2407 that verify the branch_checked_out() helper in the
case of bisects and rebases were added by 9347303db89 (branch: check for
bisects and rebases, 2022-06-08). However, that commit failed to check
for rebases that are using the 'apply' backend.
Add a test that checks the apply backend. The implementation was already
correct here, but it is good to have regression tests before modifying
the implementation further.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests added by d2ba271aad (branch: check for bisects and rebases,
2022-06-14) modified hidden state to verify the branch_checked_out()
helper. While this indeed checks that the method implementation is _as
designed_, it doesn't show that it is _correct_. Specifically, if 'git
bisect' or 'git rebase' change their back-end for preserving refs, then
these tests do not demonstrate that drift as a bug in
branch_checked_out().
Modify the tests in t2407 to actually rely on a paused bisect or rebase.
This requires adding the !SANITIZE_LEAK prereq for tests using those
builtins. The logic is still tested for leaks in the final test which
does set up that back-end directly for an error state that should not be
possible using Git commands.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The word "whitelist" has cultural implications that are not inclusive.
Thankfully, it is not difficult to reword and avoid its use.
The GIT_ALLOW_PROTOCOL environment variable was referred to as a
"whitelist", but the word "allow" is already part of the variable.
Replace "whitelist" with "allow_list" in these cases to demonstrate that
we are processing a list of allowed protocols.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The word "whitelist" has cultural implications that are not inclusive.
Thankfully, it is not difficult to reword and avoid its use.
Focus on changes in the test scripts, since most of the changes are in
comments and test names. The renamed test_allow_var helper is only used
once inside the widely-used test_proto helper.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for GIT_ALLOW_PROTOCOL has a sentence that adds no
value, since it repeats the meaning from the previous sentence (twice!).
The word "whitelist" has cultural implications that are not inclusive,
which brought attention to this sentence.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation and error messages for git-cvsserver include some
references to a "whitelist" that is not otherwise included in the
documentation. When different parts of the documentation do not use
common language, this can lead to confusion as to how things are meant
to operate.
Further, the word "whitelist" has cultural implications that make its
use non-inclusive. Thankfully, we can remove it while increasing
clarity.
Update Documentation/git-cvsserver.txt in a similar way to the previous
change to Documentation/git-daemon.txt. The optional '<directory>...'
list can specify a list of allowed directories. We refer to that list
directly inside of the documentation for the GIT_CVSSERVER_ROOT
environment variable.
While modifying this documentation, update the environment variables to
use a list format. We use the modern way of tabbing the description of
each variable in this section. We do _not_ update the description of
'<directory>...' to use tabs this way since the rest of the items in the
OPTIONS list do not use this modern formatting.
A single error message in the actual git-cvsserver.perl code refers to
the whitelist during argument parsing. Instead, refer to the directory
list that has been clarified in the documentation.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The undecorated arguments to the 'git-daemon' command provide a list of
directories. When at least one directory is specified, then 'git-daemon'
only serves requests that are within that directory list. The boolean
'--strict-paths' option makes the list more explicit in that
subdirectories are no longer included.
The existing documentation and error messages around this directory list
refer to it and its behavior as a "whitelist". The word "whitelist" has
cultural implications that are not inclusive. Thankfully, it is not
difficult to reword and avoid its use. In the process, we can define the
purpose of this directory list directly.
In Documentation/git-daemon.txt, rewrite the OPTIONS section around the
'<directory>' option. Add additional clarity to the other options that
refer to these directories.
Some error messages can also be improved in daemon.c. The
'--strict-paths' option requires '<directory>' arguments, so refer to
that section of the documentation directly. A logerror() call points out
that a requested directory is not in the specified directory list. We
can use "list" here without any loss of information.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update git-credential-osxkeychain.c to remove 'format string is not a string
literal (potentially insecure)' compiler warning by treating the string as
an argument.
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users may have configured "git merge" to always require GPG
signing the resulting commits. We are not running "git merge" to
re-create merge commits, but merely to replay merge conflicts,
and we will immediately discard the resulting commits; there
is no point in signing them.
Override such configuration that forces useless signing from the
command line with the "--no-gpg-sign" option.
Signed-off-by: Celeste Liu <coelacanthus@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
