The helper functions are implemented, documented, and used in a few
places to validate them, but not everywhere to avoid useless code churn.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --no-python option was added to test-lib.sh by Johannes Schindelin
in early 2006 in abb7c7b3. It was later turned into a no-op by Junio C
Hamano in 7cdbff14 the same year.
Over three years is long enough before removing this old wart which
was retained for backwards compatibility. Our tests have been using
NO_PYTHON and "test_have_prereq PYTHON" for a long time now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running the tests with --quiet under a TAP harness will always fail,
since a TAP harness always needs actual test output to go along with
the plan that's being emitted.
Change the test-lib.sh to ignore the --quiet option under
HARNESS_ACTIVE to work around this. Then users that have --quiet in
their GIT_TEST_OPTS can run tests under prove(1) without everything
breaking.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Place setup commands in test_expect_success blocks. This makes the
rare event of the setup commands breaking on some platform easier to
diagnose, and more importantly, it visually distinguishes where
each test begins and ends.
Instead of running test -z against the result of "git diff" command
substitution, use "git diff --exit-code", to improve output when
running with the "-v" option.
Use test_cmp in place of "test $(foo) = $(bar)" for similar reasons.
Remove whitespace after the > and < redirection operators for
consistency with other tests.
The order of arguments to test_cmp is "test_cmp expected actual".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current make target 'aggregate-results' scanned all files matching
test-results/t*-*. Normally these are only the test counts (and the
exit values, which are ignored), but with --tee the suite also dumps
all output. Furthermore, with --verbose t1450 contains several lines
starting with "broken link from ..." which matches the criteria used
by aggregate-results.sh.
Rename the counts output files to *.counts, and only scan those.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the output TAP compliant for tests skipped on request (GIT_SKIP_TESTS).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
04ece59 (GIT_SKIP_TESTS: allow users to omit tests that are known to break, 2006-12-28)
introduced GIT_SKIP_TESTS, and since then we have had two nested loops
iterating over GIT_SKIP_TESTS with the same loop variable.
Reduce this to one loop.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in the testsuite will emit a line that doesn't end with a
newline, right before we're about to output "ok" or "not ok". This
breaks the TAP output with "Tests out of sequence" errors since a TAP
harness can't understand this:
ok 1 - A test
[some output here]ok 2 - Another test
ok 3 - Yet another test
Work around it by emitting an empty line before we're about to say
"ok" or "not ok", but only if we're running under --verbose and
HARNESS_ACTIVE=1 is set, which'll only be the case when running under
a harnesses like prove(1).
I think it's better to do this than fix each tests by adding `&& echo'
everywhere. More tests might be added that break TAP in the future,
and a human isn't going to look at the extra whitespace, since
HARNESS_ACTIVE=1 always means a harness is reading it.
The tests that had issues were:
t1007, t3410, t3413, t3409, t3414, t3415, t3416, t3412, t3404,
t5407, t7402, t7003, t9001
With this workaround the entire test suite runs without errors under:
prove -j 10 ./t[0-9]*.sh :: --verbose
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before TAP we just ran the Perl test and assumed that it failed if
nothing was printed on STDERR. Continue doing that, but introduce a
`test_external_has_tap' variable which tests can set to indicate that
they're outputting TAP.
If it's set we won't output a test plan, but trust the external test
to do so. That way we can make external tests work with a TAP harness,
but still maintain compatibility with test-lib's own way of tracking
tests through the test-results directory.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
TAP, the Test Anything Protocol, is a simple text-based interface
between testing modules in a test harness. test-lib.sh's output was
already very close to being valid TAP. This change brings it all the
way there. Before:
$ ./t0005-signals.sh
* ok 1: sigchain works
* passed all 1 test(s)
And after:
$ ./t0005-signals.sh
ok 1 - sigchain works
# passed all 1 test(s)
1..1
The advantage of using TAP is that any program that reads the format
(a "test harness") can run the tests. The most popular of these is the
prove(1) utility that comes with Perl. It can run tests in parallel,
display colored output, format the output to console, file, HTML etc.,
and much more. An example:
$ prove ./t0005-signals.sh
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.01 cusr 0.02 csys = 0.06 CPU)
Result: PASS
prove(1) gives you human readable output without being too
verbose. Running the test suite in parallel with `make test -j15`
produces a flood of text. Running them with `prove -j 15 ./t[0-9]*.sh`
makes it easy to follow what's going on.
All this patch does is re-arrange the output a bit so that it conforms
with the TAP spec, everything that the test suite did before continues
to work. That includes aggregating results in t/test-results/, the
--verbose, --debug and other options for tests, and the test color
output.
TAP harnesses ignore everything that they don't know about, so running
the tests with --verbose works:
$ prove ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh .. Terminated
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.01 cusr 0.01 csys = 0.05 CPU)
Result: PASS
Just supply the -v option to prove itself to get all the verbose
output that it suppresses:
$ prove -v ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh ..
Initialized empty Git repository in /home/avar/g/git/t/trash directory.t0005-signals/.git/
expecting success:
test-sigchain >actual
case "$?" in
143) true ;; # POSIX w/ SIGTERM=15
3) true ;; # Windows
*) false ;;
esac &&
test_cmp expect actual
Terminated
ok 1 - sigchain works
# passed all 1 test(s)
1..1
ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.01 cusr 0.01 csys = 0.04 CPU)
Result: PASS
As a further example, consider this test script that uses a lot of
test-lib.sh features by Jakub Narebski:
#!/bin/sh
test_description='this is a sample test.
This test is here to see various test outputs.'
. ./test-lib.sh
say 'diagnostic message'
test_expect_success 'true test' 'true'
test_expect_success 'false test' 'false'
test_expect_failure 'true test (todo)' 'true'
test_expect_failure 'false test (todo)' 'false'
test_debug 'echo "debug message"'
test_done
The output of that was previously:
* diagnostic message # yellow
* ok 1: true test
* FAIL 2: false test # bold red
false
* FIXED 3: true test (todo)
* still broken 4: false test (todo) # bold green
* fixed 1 known breakage(s) # green
* still have 1 known breakage(s) # bold red
* failed 1 among remaining 3 test(s) # bold red
But is now:
diagnostic message # yellow
ok 1 - true test
not ok - 2 false test # bold red
# false
ok 3 - true test (todo) # TODO known breakage
not ok 4 - false test (todo) # TODO known breakage # bold green
# fixed 1 known breakage(s) # green
# still have 1 known breakage(s) # bold red
# failed 1 among remaining 3 test(s) # bold red
1..4
All the coloring is preserved when the test is run manually. Under
prove(1) the test performs as expected, even with --debug and
--verbose options:
$ prove ./example.sh :: --debug --verbose
./example.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/4 subtests
(1 TODO test unexpectedly succeeded)
Test Summary Report
-------------------
./example.sh (Wstat: 256 Tests: 4 Failed: 1)
Failed test: 2
TODO passed: 3
Non-zero exit status: 1
Files=1, Tests=4, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.00 cusr 0.01 csys = 0.03 CPU)
Result: FAIL
The TAP harness itself doesn't get confused by the color output, they
aren't used by test-lib.sh stdout isn't open to a terminal (test -t 1).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
Otherwise running individual tests from t/ directory may lack the definition
of $DIFF, $GIT_TEST_CMP and friends.
Noticed and initial patch provided by Thomas Rast, alternative solution
suggested by Brandon Casey, which this patch implements.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
* jn/gitweb-caching-prep:
gitweb: Move generating page title to separate subroutine
gitweb: Add custom error handler using die_error
gitweb: Use nonlocal jump instead of 'exit' in die_error
gitweb: href(..., -path_info => 0|1)
Export more test-related variables when running external tests
In 3bf7886 (test-lib: Let tests specify commands to be run at end of
test, 2010-05-02), the git test harness learned to run cleanup
commands unconditionally at the end of a test. During each test,
the intended cleanup actions are collected in the test_cleanup variable
and evaluated. That variable looks something like this:
eval_ret=$?; clean_something && (exit "$eval_ret")
eval_ret=$?; clean_something_else && (exit "$eval_ret")
eval_ret=$?; final_cleanup && (exit "$eval_ret")
eval_ret=$?
All cleanup actions are run unconditionally but if one of them fails
it is properly reported through $eval_ret.
On FreeBSD, unfortunately, $? is set at the beginning of an ‘eval’
to 0 instead of the exit status of the previous command. This results
in tests using test_expect_code appearing to fail and all others
appearing to pass, unless their cleanup fails. Avoid the problem by
setting eval_ret before the ‘eval’ begins.
Thanks to Jeff King for the explanation.
Cc: Jeff King <peff@peff.net>
Cc: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain actions can imply that if the test fails early, recovery from
within other tests is too much to expect:
- creating unwritable directories, like the EACCESS test in t0001-init
- setting unusual configuration, like user.signingkey in t7004-tag
- crashing and leaving the index lock held, like t3600-rm once did
Some test scripts work around this by running cleanup actions outside
the supervision of the test harness, with the unfortunate consequence
that those commands are not appropriately echoed and their output not
suppressed. Others explicitly save exit status, clean up, and then
reset the exit status within the tests, which has excellent behavior
but makes the tests hard to read. Still others ignore the problem.
Allow tests a fourth option: by calling this function, tests can
stack up commands they would like to be run to clean up.
Commands passed to test_when_finished during a test are
unconditionally run in the test environment immediately before the
test is completed, in last-in-first-out order. If some cleanup
command fails, then the other cleanup commands are still run before
the failure is reported and the test script allowed to continue.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dear Junio,
this is a resend of relicensing patch for test suite library, which
was initially sent by Carl Worth. Since the time you sent me acks for
this patch collected by you, I collected 8 additional acks as is
documented at
https://git.wiki.kernel.org/index.php/Test-lib_reclicensing. There are
still three contributors missing: Bert Wesarg, Stephan Beyer and Bryan
Donlan. The contributions of first two are clearly not copyrightable.
I'm not sure about the copyrightability of Bryan Donlan's
contributions (git log -p --author='Bryan Donlan' t/test-lib.sh).
Carl told me that in your ack collection process you missed only three
acks. So I wonder whether you already did some analysis of which
contributions are copyrightable. If so, are the missing acks in the
list bellow?
Thanks
Michal
8<--------8<--------8<--------
This file has had no explicit license information noted in it, but
has clearly been created and modified according to the terms of GPLv2
as with the rest of the git code base.
The purpose of relicensing is to allow other GPLv3+ projects (in
particular, the notmuch project: http://notmuchmail.org) to use this
same test-suite structure and to contribute changes back as well.
Signed-off-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Brandon Casey <drafnel@gmail.com>
Acked-by: Clemens Buchacher <drizzd@aon.at>
Acked-by: David Reiss <dreiss@facebook.com>
Acked-by: Emil Sit <sit@emilsit.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Acked-by: Fredrik Kuivinen <frekui@gmail.com>
Acked-by: Gerrit Pape <pape@smarden.org>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Acked-by: Johan Herland <johan@herland.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Lea Wiemann <lewiemann@gmail.com>
Acked-by: Markus Heidelberg <markus.heidelberg@web.de>
Acked-by: Martin Waitz <tali@admingilde.org>
Acked-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Acked-by: Matthias Lederhofer <matled@gmx.net>
Acked-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Michele Ballabio <barra_cuda@katamail.com>
Acked-by: Miklos Vajna <vmiklos@frugalware.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: Pavel Roskin <proski@gnu.org>
Acked-by: Petr Baudis <pasky@ucw.cz>
Acked-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add exporting TEST_DIRECTORY and TRASH_DIRECTORY to test_external, for
external tests to be able to find test script (and git sources), and
to find trash directory (usually with test repository in it).
Add also exporting GIT_TEST_LONG, so that external test can skip
time-intensive tests unless test is invoked with `--long' option.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of these tests are removing files, environment variables, and
configuration that might interfere outside the test. Putting these
clean-up commands in the test (in the same spirit as v1.7.1-rc0~59,
2010-03-20) means that errors during setup will be caught quickly and
non-error text will be suppressed without -v.
While at it, apply some other minor fixes:
- do not rely on the shell to export variables defined with the same
command as a function call
- avoid whitespace immediately after the > redirection operator, for
consistency with the style of other tests
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/notes-display:
git-notes(1): add a section about the meaning of history
notes: track whether notes_trees were changed at all
notes: add shorthand --ref to override GIT_NOTES_REF
commit --amend: copy notes to the new commit
rebase: support automatic notes copying
notes: implement helpers needed for note copying during rewrite
notes: implement 'git notes copy --stdin'
rebase -i: invoke post-rewrite hook
rebase: invoke post-rewrite hook
commit --amend: invoke post-rewrite hook
Documentation: document post-rewrite hook
Support showing notes from more than one notes tree
test-lib: unset GIT_NOTES_REF to stop it from influencing tests
Conflicts:
git-am.sh
refs.c
Implement helper functions to load the rewriting config, and to
actually copy the notes. Also document the config.
Secondly, also implement an undocumented --for-rewrite=<cmd> option to
'git notes copy' which is used like --stdin, but also puts the
configuration for <cmd> into effect. It will be needed to support the
copying in git-rebase.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, you can set notes.displayRef to a glob that points at
your favourite notes refs, e.g.,
[notes]
displayRef = refs/notes/*
Then git-log and friends will show notes from all trees.
Thanks to Junio C Hamano for lots of feedback, which greatly
influenced the design of the entire series and this commit in
particular.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I used to set GREP_OPTIONS to exclude *.orig and *.rej files. But with this
the test t4252-am-options.sh fails because it calls grep with a .rej file:
grep "@@ -1,3 +1,3 @@" file-2.rej
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
append_cr(), remove_cr(), q_to_nul() and q_to_cr() are defined in multiple
tests. Consolidate them into test-lib.sh so we can stop redefining them.
The use of remove_cr() in t0020 to test for a CR is replaced with a new
function has_cr() to accurately reflect what is intended (the output of
remove_cr() was being thrown away).
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/fix-tree-walk:
read-tree --debug-unpack
unpack-trees.c: look ahead in the index
unpack-trees.c: prepare for looking ahead in the index
Aggressive three-way merge: fix D/F case
traverse_trees(): handle D/F conflict case sanely
more D/F conflict tests
tests: move convenience regexp to match object names to test-lib.sh
Conflicts:
builtin-read-tree.c
unpack-trees.c
unpack-trees.h
* mo/bin-wrappers:
INSTALL: document a simpler way to run uninstalled builds
run test suite without dashed git-commands in PATH
build dashless "bin-wrappers" directory similar to installed bindir
* jk/1.7.0-status:
status/commit: do not suggest "reset HEAD <path>" while merging
commit/status: "git add <path>" is not necessarily how to resolve
commit/status: check $GIT_DIR/MERGE_HEAD only once
t7508-status: test all modes with color
t7508-status: status --porcelain ignores relative paths setting
status: reduce duplicated setup code
status: disable color for porcelain format
status -s: obey color.status
builtin-commit: refactor short-status code into wt-status.c
t7508-status.sh: Add tests for status -s
status -s: respect the status.relativePaths option
docs: note that status configuration affects only long format
commit: support alternate status formats
status: add --porcelain output format
status: refactor format option parsing
status: refactor short-mode printing to its own function
status: typo fix in usage
git status: not "commit --dry-run" anymore
git stat -s: short status output
git stat: the beginning of "status that is not a dry-run of commit"
Conflicts:
t/t4034-diff-words.sh
wt-status.c
* sr/vcs-helper:
tests: handle NO_PYTHON setting
builtin-push: don't access freed transport->url
Add Python support library for remote helpers
Basic build infrastructure for Python scripts
Allow helpers to report in "list" command that the ref is unchanged
Fix various memory leaks in transport-helper.c
Allow helper to map private ref names into normal names
Add support for "import" helper command
Allow specifying the remote helper in the url
Add a config option for remotes to specify a foreign vcs
Allow fetch to modify refs
Use a function to determine whether a remote is valid
Allow programs to not depend on remotes having urls
Fix memory leak in helper method for disconnect
Conflicts:
Documentation/git-remote-helpers.txt
Makefile
builtin-ls-remote.c
builtin-push.c
transport-helper.c
Move a useful script function to decode colored output to
text form from t4034 and use it in this test as well.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, test-lib checks that the git_remote_helpers
directory has been built. However, if we are building
without python, we will not have done anything at all in
that directory, and test-lib's sanity check will fail.
We bump the inclusion of GIT-BUILD-OPTIONS further up in
test-lib; it contains configuration, and as such should be
read before we do any checks (and in this particular case,
we need its value to do our check properly).
Signed-off-by: Jeff King <peff@peff.net>
Looks-fine-to-me-by: Brandon Casey <brandon.casey.ctr@nrlssc.navy.mil>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only put bin-wrappers in the PATH (not GIT_EXEC_PATH), to emulate the
default installed user environment, and ensure all the programs run
correctly in such an environment. This is now the default, although
it can be overridden with a --with-dashes test option when running
tests.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces parts of a Python package called
"git_remote_helpers" containing the building blocks for
remote helpers written in Python.
No actual remote helpers are part of this patch, this patch only
includes the common basics needed to start writing such helpers.
The patch includes the necessary Makefile additions to build and
install the git_remote_helpers Python package along with the rest of
Git.
This patch is based on Johan Herland's git_remote_cvs patch and
has been improved by the following contributions:
- David Aguilar: Lots of Python coding style fixes
- David Aguilar: DESTDIR support in Makefile
Cc: David Aguilar <davvid@gmail.com>
Cc: Johan Herland <johan@herland.net>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds basic boilerplate support (based on corresponding Perl
sections) for enabling the building and installation Python scripts.
There are currently no Python scripts being built, and when Python
scripts are added in future patches, their building and installation
can be disabled by defining NO_PYTHON.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refuse to use $VISUAL and fall back to $EDITOR if TERM is unset
or set to "dumb". Traditionally, VISUAL is set to a screen
editor and EDITOR to a line-based editor, which should be more
useful in that situation.
vim, for example, is happy to assume a terminal supports ANSI
sequences even if TERM is dumb (e.g., when running from a text
editor like Acme). git already refuses to fall back to vi on a
dumb terminal if GIT_EDITOR, core.editor, VISUAL, and EDITOR are
unset, but without this patch, that check is suppressed by
VISUAL=vi.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms (IRIX 6.5, Solaris 7) do not provide the 'yes' utility.
Currently, some tests, including t7610 and t9001, try to call this program.
Due to the way the tests are structured, the tests still pass even though
this program is missing. Rather than succeeding by chance, let's provide
an implementation of the simple 'yes' utility in shell for all platforms to
use.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests generate a large amount of I/O activity creating
and destroying repositories and files. We can improve the
time it takes to run the test suite by creating trash
directories on filesystems with better performance
characteristic, even though we may not want the rest of the
git repository on those filesystems (e.g., because they are
not network connected, or because they are temporary
ramdisks).
For example, on a dual processor system:
$ cd t && time make -j32
real 1m51.562s
user 0m59.260s
sys 1m20.933s
# /dev/shm is tmpfs
$ cd t && time make -j32 GIT_TEST_OPTS="--root=/dev/shm"
real 1m1.484s
user 0m53.555s
sys 1m5.264s
We almost halve the wall clock time, and we utilize the
dual processors much better.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most scripts don't care about the absolute path to the trash
directory. The one exception was t4014 script, which pieced
together $TEST_DIRECTORY and $test itself to get an absolute
directory.
Instead, let's provide a $TRASH_DIRECTORY which specifies
the same thing. This keeps the $test variable internal to
test-lib.sh and paves the way for trash directories in other
locations.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit trap should not be removed in case tests require cleanup code. This
is especially important if tests are executed with the --immediate option.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, unknown options would be ignored, including any subsequent
valid options.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, test_create_repo() expects that templates can be found below
`pwd`/.. This assumption fails when tests are run against a git
installed somewhere else or test_create_repo() is called from
subdirectiories (several tests do this).
Therefore, use $TEST_DIRECTORY as introduced in 2d84e9fb and expect
templates to be present in $TEST_DIRECTORY/.. which should be the root
dir of the git checkout.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These scripts all test git programs that are written in
perl, and thus obviously won't work if NO_PERL is defined.
We pass NO_PERL to the scripts from the building Makefile
via the GIT-BUILD-OPTIONS file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bring documentation in test-lib and clean target
in Makefile in-line with abc5d372.
Signed-off-by: Emil Sit <sit@emilsit.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation of exec on Windows is just a rough approximation of the
POSIX behavior. In particular, no real process "overlay" happens (a new
process is spawned instead and the parent process waits until the child
terminates). In particular, the process ID cannot be taken by the exec'd
process. But there is one test in t7502-commit.sh that depends on this.
We have to skip it on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
* js/windows-tests:
t0060: fix whitespace in "wc -c" invocation
t5503: GIT_DEBUG_SEND_PACK is not supported on MinGW
t7004: Use prerequisite tags to skip tests that need gpg
Use prerequisites to skip tests that need unzip
t3700: Skip a test with backslashes in pathspec
Skip tests that require a filesystem that obeys POSIX permissions
t0060: Fix tests on Windows
Use prerequisite tags to skip tests that depend on symbolic links
t9100, t9129: Use prerequisite tags for UTF-8 tests
t5302: Use prerequisite tags to skip 64-bit offset tests
Skip tests that fail if the executable bit is not handled by the filesystem
t3600: Use test prerequisite tags
test-lib: Infrastructure to test and check for prerequisites
t0050: Check whether git init detected symbolic link support correctly
Tests on Windows: $(pwd) must return Windows-style paths
test-lib: Work around missing sum on Windows
test-lib: Work around incompatible sort and find on Windows
Conflicts:
t/t3000-ls-files-others.sh
The test verifies that glob special characters can be escaped with
backslashes. In particular, the string fo\[ou\]bar is given to git.
On Windows, this does not work because backslashes are first of all
directory separators, and first thing git does with a pathspec from the
command line is to convert backslashes to forward slashes.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Many tests depend on that symbolic links work. This introduces a check
that sets the prerequisite tag SYMLINKS if the file system supports
symbolic links. Since so many tests have to check for this prerequisite,
we do the check in test-lib.sh, so that we don't need to repeat the test
in many scripts.
To check for 'ln -s' failures, you can use a FAT partition on Linux:
$ mkdosfs -C git-on-fat 1000000
$ sudo mount -o loop,uid=j6t,gid=users,shortname=winnt git-on-fat /mnt
Clone git to /mnt and
$ GIT_SKIP_TESTS='t0001.1[34] t0010 t1301 t403[34] t4129.[47] t5701.7
t7701.3 t9100 t9101.26 t9119 t9124.[67] t9200.10 t9600.6' \
make test
(These additionally skipped tests depend on POSIX permissions that FAT on
Linux does not provide.)
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Some tests can be run only if a particular prerequisite is available. For
example, some tests require that an UTF-8 locale is available. Here we
introduce functions that are used in this way:
1. Insert code that checks whether the prerequisite is available. If it is,
call test_set_prereq with an arbitrary tag name that subsequently can be
used to check for the prerequisite:
case $LANG in
*.utf-8)
test_set_prereq UTF8
;;
esac
2. In the calls to test_expect_success pass the tag name:
test_expect_success UTF8 '...description...' '...tests...'
3. There is an auxiliary predicate that can be used anywhere to test for
a prerequisite explicitly:
if test_have_prereq UTF8
then
...code to be skipped if prerequisite is not available...
fi
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Many tests pass $(pwd) in some form to git and later test that the output
of git contains the correct value of $(pwd). For example, the test of
'git remote show' sets up a remote that contains $(pwd) and then the
expected result must contain $(pwd).
Again, MSYS-bash's path mangling kicks in: Plain $(pwd) uses the MSYS style
absolute path /c/path/to/git. The test case would write this name into
the 'expect' file. But when git is invoked, MSYS-bash converts this name to
the Windows style path c:/path/to/git, and git would produce this form in
the result; the test would fail.
We fix this by passing -W to bash's pwd that produces the Windows-style
path.
There are a two cases that need an accompanying change:
- In t1504 the value of $(pwd) becomes part of a path list. In this case,
the lone 'c' in something like /foo:c:/path/to/git:/bar inhibits
MSYS-bashes path mangling; IOW in this case we want the /c/path/to/git
form to allow path mangling. We use $PWD instead of $(pwd), which always
has the latter form.
- In t6200, $(pwd) - the Windows style path - must be used to construct the
expected result because that is the path form that git sees. (The change
in the test itself is just for consistency: 'git fetch' always sees the
Windows-style path, with or without the change.)
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
t1002-read-tree-m-u-2way.sh uses 'sum', but it does not rely on the exact
form of the sum, only that it is a hash digest. Therefore, we can sneak
in 'md5sum' under the name 'sum'.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
If the PATH lists the Windows system directories before the MSYS
directories, Windows's own incompatible sort and find commands would be
picked up. We implement these commands as functions and call the real
tools by absolute path.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
This function replaces sequences of 'chmod +x' and 'git update-index
--chmod=+x' in the test suite, whose purpose is to help filesystems
that need core.filemode=false. Two places where only 'chmod +x' was used
we also use this new function.
The function calls 'git update-index --chmod' without checking
core.filemode (unlike some of the call sites did). We do this because the
call sites *expect* that the executable bit ends up in the index (ie. it
is not the purpose of the call sites to *test* whether git treats
'chmod +x' and 'update-index --chmod=+x' correctly). Therefore, on
filesystems with core.filemode=true the 'git update-index --chmod' is a
no-op.
The function uses --add with update-index to help one call site in
t6031-merge-recursive. It makes no difference for the other callers.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Since the test case counter was incremented very late, there were a few
users of the counter had to do their own incrementing. Now we increment it
early and simplify these users.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
In particular:
- Test case counting can be achieved by arithmetic expansion.
- The name of the test, e.g. t1234, can be computed with ${0%%} and ${0##}.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Introduce variables GIT_TEST_INSTALLED and GIT_TEST_EXEC_PATH such that
the test suite can be run against a git which is installed at
GIT_TEST_INSTALLED with subcommands at GIT_TEST_EXEC_PATH.
GIT_TEST_INSTALLED defaults to the git.git checkout, GIT_TEST_EXEC_PATH
defaults to the output of '$GIT_TEST_INSTALLED/git --exec-path'.
Run the suite e.g. as
GIT_TEST_INSTALLED=/some/path make test
but note that this requires and uses parts of a compiled git in the
git.git checkout: test helpers, templates and perl libraries are taken
from there.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It just happens so that when GIT_EXEC_PATH points to a compiled checkout
of git.git it contains "git". Since this is not true in general make
test-lib check for "git-init" which is always in GIT_EXEC_PATH.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier code meant to attempt to strip everything except the test
number, but only stripped the part starting with the last dash.
However, there is no reason why we should not use the whole basename.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/valgrind:
valgrind: do not require valgrind 3.4.0 or newer
test-lib: avoid assuming that templates/ are in the GIT_EXEC_PATH
Tests: let --valgrind imply --verbose and --tee
Add a script to coalesce the valgrind outputs
t/Makefile: provide a 'valgrind' target
test-lib.sh: optionally output to test-results/$TEST.out, too
Valgrind support: check for more than just programming errors
valgrind: ignore ldso and more libz errors
Add valgrind support in test scripts
* maint:
tests: fix "export var=val"
Skip timestamp differences for diff --no-index
Documentation/git-push: --all, --mirror, --tags can not be combined
Some shells do not like "export var=val"; the right way to write
it is to do an assignment and then export just the variable name.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not make much sense to run the (expensive) valgrind tests and
not look at the output.
To prevent output from scrolling out of reach, the parameter --tee is
implied, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When tests are run in parallel and a few tests fail, it does not help
that the output of the terminal is totally confusing, as you rarely know
which test which line came from.
So introduce the option '--tee' which triggers that the output of the
tests will be written to t/test-results/$TEST.out in addition to the
terminal, where $TEST is the basename of the script.
Unfortunately, there seems to be no way to redirect a given file
descriptor to a specified subprocess in POSIX shell, only redirection
to a file is supported via 'exec > $FILE'.
At least with bash, one might think that 'exec >($COMMAND)' would work
as intended, but it does not.
The common way to work around the lack of proper tools support is to
work with named pipes, alas, one of our most beloved platforms does not
really support named pipes. Besides, we would need a pipe for every
script, as the whole point of this patch is to allow parallel execution.
Therefore, we handle the redirection in the following way: when '--tee'
was passed to the test script, the variable GIT_TEST_TEE_STARTED is set
(to avoid triggering that code path again) and the script is started
_again_, in a subshell, redirected to the command "tee".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes --valgrind try to override _all_ Git binaries in the
PATH, and it makes it an error to call *.sh and *.perl scripts directly.
While it is not strictly necessary to look through the whole PATH to
find git binaries to override, it is in line with running an expensive
test (which valgrind is) to make extra sure that only binaries are
tested that actually come from the git.git checkout.
In the same spirit, we can test that neither our test suite nor our
scripts try to run the *.sh or *.perl scripts directly.
It's more like a "because we can" than a "this is tightly connected
to valgrind", but in the author's opinion "because we can" is "so we
should" in this case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds the ability to use valgrind's memcheck tool to
diagnose memory problems in Git while running the test scripts.
It requires valgrind 3.4.0 or newer.
It works by creating symlinks to a valgrind script, which have the same
name as our Git binaries, and then putting that directory in front of
the test script's PATH as well as set GIT_EXEC_PATH to that directory.
Git scripts are symlinked from that directory directly.
That way, Git binaries called by Git scripts are valgrinded, too.
Valgrind can be used by specifying "GIT_TEST_OPTS=--valgrind" in the
make invocation. Any invocation of git that finds any errors under
valgrind will exit with failure code 126. Any valgrind output will go
to the usual stderr channel for tests (i.e., /dev/null, unless -v has
been specified).
If you need to pass options to valgrind -- you might want to run
another tool than memcheck, for example -- you can set the environment
variable GIT_VALGRIND_OPTIONS.
A few default suppressions are included, since libz seems to trigger
quite a few false positives. We'll assume that libz works and that we
can ignore any errors which are reported there.
Note: it is safe to run the valgrind tests in parallel, as the links in
t/valgrind/bin/ are created using proper locking.
Initial patch and all the hard work by Jeff King.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brian Gernhardt noticed that t3411 was broken recently on case insensitive
filesystems.
0088496 (test-lib.sh: introduce test_commit() and test_merge() helpers,
2009-01-27) used a tag and a file with the same name, only different in
case, and converted many existing tests that needed only a file (or a
tag).
Some tests may want to refer to a rev or a file, but on a filesystem that
loses cases, referring to either without disambiguation mark ("--") on the
command line now triggers an error (t3411 was the only one such test).
Fix it by using a filename that is different from the tagname each step
creates.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Often we just need to add a commit with a given (short) name, that will
be tagged with the same name. Now, relatively complicated graphs can be
constructed easily and in a clear fashion:
test_commit A &&
test_commit B &&
git checkout A &&
test_commit C &&
test_merge D B
will construct this graph:
A - B
\ \
C - D
For simplicity, files whose name is the lower case version of the commit
message (to avoid a warning about ambiguous names) will be committed, with
the corresponding commit messages as contents.
If you need to provide a different file/different contents, you can use
the more explicit form
test_commit $MESSAGE $FILENAME $CONTENTS
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 'man 1p trap' there is written:
"Implementations may permit names with the SIG prefix or ignore case
in signal names as an extension."
So change the lowercase signals to uppercase, which is POSIX compliant
instead of being an extension.
There wasn't anybody claiming that it doesn't work, but there was a bug
with using a signal with the SIG prefix, which is an extension as well.
So let's play it safe and change it, since it doesn't hurt anyone.
While at it, also convert 8 indentation spaces to 1 tab character.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In dc871831(Only use GIT_CONFIG in "git config", not other programs),
GIT_CONFIG_LOCAL was rested in peace, in favor of not reading
/etc/gitconfig and $HOME/.gitconfig at all when GIT_CONFIG is set.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rebase -i: do not fail when there is no commit to cherry-pick
test-lib: fix color reset in say_color()
fix pread()'s short read in index-pack
Conflicts:
csum-file.c
When executing a single test with colors enabled, the cursor was not set
back to the previous one, and you had to hit an extra enter to get it
back.
Work around this problem by calling 'tput sgr0' before printing the
final newline.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Sometimes you want to keep the trash directory, even if all tests
passed. For example, when extending tests, it comes it quite handy.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many test scripts assumed that they will start in a 'trash' subdirectory
that is a single level down from the t/ directory, and referred to their
test vector files by asking for files like "../t9999/expect". This will
break if we move the 'trash' subdirectory elsewhere.
To solve this, we earlier introduced "$TEST_DIRECTORY" so that they can
refer to t/ directory reliably. This finally makes all the tests use
it to refer to the outside environment.
With this patch, and a one-liner not included here (because it would
contradict with what Dscho really wants to do):
| diff --git a/t/test-lib.sh b/t/test-lib.sh
| index 70ea7e0..60e69e4 100644
| --- a/t/test-lib.sh
| +++ b/t/test-lib.sh
| @@ -485,7 +485,7 @@ fi
| . ../GIT-BUILD-OPTIONS
|
| # Test repository
| -test="trash directory"
| +test="trash directory/another level/yet another"
| rm -fr "$test" || {
| trap - exit
| echo >&5 "FATAL: Cannot prepare test area"
all the tests still pass, but we would want extra sets of eyeballs on this
type of change to really make sure.
[jc: with help from Stephan Beyer on http-push tests I do not run myself;
credits for locating silly quoting errors go to Olivier Marin.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On multiprocessor machines, or with I/O heavy tests (that leave the
CPU waiting a lot), it makes sense to parallelize the tests.
However, care has to be taken that the different jobs use different
trash directories.
This commit does so, by creating the trash directories with a suffix
that is unique with regard to the test, as it is the test's base name.
Further, the trash directory is removed in the test itself if
everything went fine, so that the trash directories do not
pile up only to be removed at the very end.
If a test failed, the trash directory is not removed. Chances are
that the exact error message is lost in the clutter, but you can still
see what test failed from the name of the trash directory, and repeat
the test (without -j).
If all was good, you will see the aggregated results.
Suggestions to simplify this commit came from Junio and René.
There still is an issue with tests that want to run a server process and
listen to a fixed port (http and svn) --- they cannot run in parallel but
this patch does not address this issue.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test_must_fail function in test-lib.sh has been designed to
distinguish segmentation faults from controlled errors. But in the
current implementation this only works if a git command does not return a
small negative value, like -1, -2 or -3. But some git commands do.
Because any signal (like SIGSEGV) will result in an exit status
less than 193, this patch just adds a further check for the exit
status.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dr/ceiling:
Eliminate an unnecessary chdir("..")
Add support for GIT_CEILING_DIRECTORIES
Fold test-absolute-path into test-path-utils
Implement normalize_absolute_path
Conflicts:
cache.h
setup.c
* sr/tests:
Hook up the result aggregation in the test makefile.
A simple script to parse the results from the testcases
Modify test-lib.sh to output stats to t/test-results/*
Conflicts:
t/test-lib.sh
This is for running external test scripts in other programming
languages that provide continuous output about their tests. Using
test_expect_success (like "test_expect_success 'description' 'perl
test-script.pl'") doesn't suffice here because test_expect_success
eats stdout in non-verbose mode, which is not fixable without major
file descriptor trickery.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --long-tests option to test-lib.sh, which enables tests to
selectively run more exhaustive (longer running, potentially
brute-force) tests. Such exhaustive tests would only be useful if one
works on the specific module that is being tested -- for a general "cd
t/; make" to check whether everything is OK, such exhaustive tests
shouldn't be run by default since the longer it takes to run the
tests, the less often they are actually run.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only ignore whitespace errors in t/tNNNN-*.sh and the t/tNNNN
subdirectories. Other files (like test libraries) should still be
checked.
Also fix a whitespace error in t/test-lib.sh.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change is needed order to aggregate data on the test run later on.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, some tests will fail because they compare command output
of subprocesses (such as git) with $PWD -- but subprocesses have the
physical path as their working directory, whereas $PWD contains the
symlinked path. This fixes it.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git recognize a new environment variable that prevents it from
chdir'ing up into specified directories when looking for a GIT_DIR.
Useful for avoiding slow network directories.
For example, I use git in an environment where homedirs are automounted
and "ls /home/nonexistent" takes about 9 seconds. Setting
GIT_CEILING_DIRS="/home" allows "git help -a" (for bash completion) and
"git symbolic-ref" (for my shell prompt) to run in a reasonable time.
Signed-off-by: David Reiss <dreiss@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit with error if cd into the "trash directory" failed (error
already reported, so just exit).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to help prevent regressions in the future, rename the trash directory
for all tests to contain spaces. This patch also corrects two failures that
were caused or exposed by this change.
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, this function correctly handles cases where the pwd contains
spaces, quotes, and other troublesome metacharacters.
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a git command is run under test_must_fail to make sure that
the argument parser catches bogus command line, it exits with 129.
We need to catch it as a valid "graceful error exit".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When your test creates an unwritable directory that test framework cannot
clean out by "rm -fr trash", later tests cannot start in a fresh state
they expect to. Detect this and error out early.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many scripts compare actual and expected output using
"diff -u". This is nicer than "cmp" because the output shows
how the two differ. However, not all versions of diff
understand -u, leading to unnecessary test failure.
This adds a test_cmp function to the test scripts and
switches all "diff -u" invocations to use it. The function
uses the contents of "$GIT_TEST_CMP" to compare its
arguments; the default is "diff -u".
On systems with a less-capable diff, you can do:
GIT_TEST_CMP=cmp make test
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
unquote_c_style: fix off-by-one.
test-lib: fix TERM to dumb for test repeatability
config.txt: refer to --upload-pack and --receive-pack instead of --exec
git-gui: Gracefully fall back to po2msg.sh if msgfmt --tcl fails
Dscho noticed that Term::ReadLine (used by send-email) colorized its
output for his TERM settings, inside t9001 tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we expect a git command to notice and signal errors, we
carelessly wrote in our tests:
test_expect_success 'reject bogus request' '
do something &&
do something else &&
! git command
'
but a non-zero exit could come from the "git command" segfaulting.
A new helper function "tset_must_fail" is introduced and it is
meant to be used to make sure the command gracefully fails (iow,
dying and exiting with non zero status is counted as a failure
to "gracefully fail"). The above example should be written as:
test_expect_success 'reject bogus request' '
do something &&
do something else &&
test_must_fail git command
'
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The top-level Makefile now creates a GIT-BUILD-OPTIONS file
which stores any options selected by the make process that
may be of use to further parts of the build process.
Specifically, we store the SHELL_PATH so that it can be used
by tests to construct shell scripts on the fly.
The format of the GIT-BUILD-OPTIONS file is Bourne shell,
and it is sourced by test-lib.sh; all tests can rely on just
having $SHELL_PATH correctly set in the environment.
The GIT-BUILD-OPTIONS file is written every time the
toplevel 'make' is invoked. Since the only users right now
are the test scripts, there's no drawback to updating its
timestamp. If something build-related depends on this, we
can do a trick similar to the one used by GIT-CFLAGS.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we expect a git command to notice and signal errors, we
carelessly wrote in our tests:
test_expect_success 'reject bogus request' '
do something &&
do something else &&
! git command
'
but a non-zero exit could come from the "git command" segfaulting.
A new helper function "tset_must_fail" is introduced and it is
meant to be used to make sure the command gracefully fails (iow,
dying and exiting with non zero status is counted as a failure
to "gracefully fail"). The above example should be written as:
test_expect_success 'reject bogus request' '
do something &&
do something else &&
test_must_fail git command
'
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http-push tests require a web server with WebDAV support.
This commit introduces a HTTPD test library, which can be configured using
the following environment variables.
GIT_TEST_HTTPD enable HTTPD tests
LIB_HTTPD_PATH web server path
LIB_HTTPD_MODULE_PATH web server modules path
LIB_HTTPD_PORT listening port
LIB_HTTPD_DAV enable DAV
LIB_HTTPD_SVN enable SVN
LIB_HTTPD_SSL enable SSL
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we set the GIT_CONFIG environment variable in
our tests so that only that file was read. However, setting
it to a static value is not correct, since we are not
necessarily always in the same directory; instead, we want
the usual git config file lookup to happen.
To do this, we stop setting GIT_CONFIG, which means that we
must now suppress the reading of the system-wide and user
configs.
This exposes an incorrect test in t1500, which is also
fixed (the incorrect test worked because we were failing to
read the core.bare value from the config file, since the
GIT_CONFIG variable was pointing us to the wrong file).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have known breakages, we still said "passed all N
test(s)", which was a bit funny.
This rewords it to read "passed all remaining N test(s)" in such
a case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch removes a spurious "command not found" error
and actually makes the "Test script did not set test_description."
string follow the command line option "--no-color".
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shuts down the "* ok ##: `test description`" messages.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ei/worktree+filter:
filter-branch: always export GIT_DIR if it is set
setup_git_directory: fix segfault if repository is found in cwd
test GIT_WORK_TREE
extend rev-parse test for --is-inside-work-tree
Use new semantics of is_bare/inside_git_dir/inside_work_tree
introduce GIT_WORK_TREE to specify the work tree
test git rev-parse
rev-parse: introduce --is-bare-repository
rev-parse: document --is-inside-git-dir
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_gdg is used as abbreviation for setup_git_directory_gently.
The work tree can be specified using the environment variable
GIT_WORK_TREE and the config option core.worktree (the environment
variable has precendence over the config option). Additionally
there is a command line option --work-tree which sets the
environment variable.
setup_gdg does the following now:
GIT_DIR unspecified
repository in .git directory
parent directory of the .git directory is used as work tree,
GIT_WORK_TREE is ignored
GIT_DIR unspecified
repository in cwd
GIT_DIR is set to cwd
see the cases with GIT_DIR specified what happens next and
also see the note below
GIT_DIR specified
GIT_WORK_TREE/core.worktree unspecified
cwd is used as work tree
GIT_DIR specified
GIT_WORK_TREE/core.worktree specified
the specified work tree is used
Note on the case where GIT_DIR is unspecified and repository is in cwd:
GIT_WORK_TREE is used but is_inside_git_dir is always true.
I did it this way because setup_gdg might be called multiple
times (e.g. when doing alias expansion) and in successive calls
setup_gdg should do the same thing every time.
Meaning of is_bare/is_inside_work_tree/is_inside_git_dir:
(1) is_bare_repository
A repository is bare if core.bare is true or core.bare is
unspecified and the name suggests it is bare (directory not
named .git). The bare option disables a few protective
checks which are useful with a working tree. Currently
this changes if a repository is bare:
updates of HEAD are allowed
git gc packs the refs
the reflog is disabled by default
(2) is_inside_work_tree
True if the cwd is inside the associated working tree (if there
is one), false otherwise.
(3) is_inside_git_dir
True if the cwd is inside the git directory, false otherwise.
Before this patch is_inside_git_dir was always true for bare
repositories.
When setup_gdg finds a repository git_config(git_default_config) is
always called. This ensure that is_bare_repository makes use of
core.bare and does not guess even though core.bare is specified.
inside_work_tree and inside_git_dir are set if setup_gdg finds a
repository. The is_inside_work_tree and is_inside_git_dir functions
will die if they are called before a successful call to setup_gdg.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some other programs get the user's email address from $EMAIL, so fall back to
that if we don't have a Git-specific email address.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make every test executable. Remove exec-attribute from included shell files,
they can't used standalone anyway.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
test-lib:
Make sure test-chmtime has been built before starting.
t4200-rerere:
Removed non-portable date dependency and avoid touch
Avoid "test -a" which isn't portable, either
lib-git-svn:
Use test-chmtime instead of Perl one-liner to poke
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was done by setting $HOME to somewhere bogus. A better method is
to reuse $GIT_CONFIG, which was invented for ignoring the global
config file explicitely.
Technically, setting GIT_CONFIG=.git/config could be wrong, but it
passes all the tests, and we can keep the tests that way.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Its really nice to be able to run a test with -v and automatically
see the "debugging" dump from merge-recursive, especially if we
are actually trying to debug merge-recursive.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While 'init-db' still is and probably will always remain a valid git
command for obvious backward compatibility reasons, it would be a good
idea to move shipped tools and docs to using 'init' instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The earlier test timestamp was too old; I forgot that the bare
unixtime integer had to be after Jan 1, 2000. This changes
test_tick to use the git-epoch timestamp.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not that this reveals anything new, but I did test_tick shell
function in test-lib and found it rather cute and nice.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In some environments, certain tests have no way of succeeding
due to platform limitation, such as lack of 'unzip' program, or
filesystem that do not allow arbitrary sequence of non-NUL bytes
as pathnames.
You should be able to say something like
$ cd t
$ GIT_SKIP_TESTS=t9200.8 t9200-git-cvsexport-commit.sh
and even:
$ GIT_SKIP_TESTS='t[0-4]??? t91?? t9200.8' make test
to omit such tests. The value of the environment variable is a
SP separated list of patterns that tells which tests to skip,
and either can match the "t[0-9]{4}" part to skip the whole
test, or t[0-9]{4} followed by ".$number" to say which
particular test to skip.
Note that some tests in the existing test suite rely on previous
test item, so you cannot arbitrarily disable one and expect the
remainder of test to check what the test originally was intended
to check.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I don't think anybody running tests needs to know they're
running init-db and creating a repository for testing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of passing --template explicitely to init-db and clone, you can
just set the environment variable GIT_TEMPLATE_DIR.
Also make use of it in the tests, to make sure that the templates are
copied.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reverts commit 74d20040ca.
Version from Johannes to introduce GIT_TEMPLATE_DIR is simpler,
although I unconsciously stayed away from introducing yet another
environment variable.
The initial t/trash repository for testing was created properly
but over time we gained many tests that create secondary test
repositories with init-db or clone and they were not careful
enough.
This fixes it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When test_expect_failure detects that a command failed, it still has to
treat a program that crashed from a signal as unexpected failure.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When running tests with --verbose it is difficult to see where
one test starts and where it ends because everything is printed
in one big lump.
Fix that by printing one single newline between each test.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/gitpm: (52 commits)
Remove -fPIC which was only needed for Git.xs
Git.pm: Kill Git.xs for now
Revert "Make it possible to set up libgit directly (instead of from the environment)"
Revert "Git.pm: Introduce fast get_object() method"
Revert "Convert git-annotate to use Git.pm"
Fix compilation with Sun CC
pass DESTDIR to the generated perl/Makefile
Eliminate Scalar::Util usage from private-Error.pm
Convert git-annotate to use Git.pm
Git.pm: Introduce fast get_object() method
Make it possible to set up libgit directly (instead of from the environment)
Work around sed and make interactions on the backslash at the end of line.
Git.pm: Introduce ident() and ident_person() methods
Convert git-send-email to use Git.pm
Git.pm: Add config() method
Use $GITPERLLIB instead of $RUNNING_GIT_TESTS and centralize @INC munging
INSTALL: a tip for running after building but without installing.
Perly Git: make sure we do test the freshly built one.
Git.pm: Don't #define around die
Git.xs: older perl do not know const char *
...
This renames merge-recursive written in Python to merge-recursive-old,
and makes merge-recur as a synonym to merge-recursive. We do not remove
merge-recur yet, but we will remove merge-recur and merge-recursive-old
in a few releases down the road.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When there are single-character filenames in the test directory,
the shell tries to expand regexps meant for tr.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If GIT_TRACE is set to an absolute path (starting with a
'/' character), we interpret this as a file path and we
trace into it.
Also if GIT_TRACE is set to an integer value greater than
1 and lower than 10, we interpret this as an open fd value
and we trace into it.
Note that this behavior is not compatible with the
previous one.
We also trace whole messages using one write(2) call to
make sure messages from processes do net get mixed up in
the middle.
This patch makes it possible to get trace information when
running "make test".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* ml/trace:
test-lib: unset GIT_TRACE
GIT_TRACE: fix a mixed declarations and code warning
GIT_TRACE: show which built-in/external commands are executed
