This fixes a long-standing patchwork of ignored files handling in
read-tree and merge-recursive, called out and suggested by Junio long
ago. Quoting from commit dcf0c16ef1 ("core.excludesfile clean-up"
2007-11-16):
git-read-tree takes --exclude-per-directory=<gitignore>,
not because the flexibility was needed. Again, this was
because the option predates the standardization of the ignore
files.
...
On the other hand, I think it makes perfect sense to fix
git-read-tree, git-merge-recursive and git-clean to follow the
same rule as other commands. I do not think of a valid use case
to give an exclude-per-directory that is nonstandard to
read-tree command, outside a "negative" test in the t1004 test
script.
This patch is the first step to untangle this mess.
The next step would be to teach read-tree, merge-recursive and
clean (in C) to use setup_standard_excludes().
History shows each of these were partially or fully fixed:
* clean was taught the new trick in 1617adc7a0 ("Teach git clean to
use setup_standard_excludes()", 2007-11-14).
* read-tree was primarily used by checkout & merge scripts. checkout
and merge later became builtins and were both fixed to use the new
setup_standard_excludes() handling in fc001b526c ("checkout,merge:
loosen overwriting untracked file check based on info/exclude",
2011-11-27). So the primary users were fixed, though read-tree
itself was not.
* merge-recursive has now been replaced as the default merge backend
by merge-ort. merge-ort fixed this by using
setup_standard_excludes() starting early in its implementation; see
commit 6681ce5cf6 ("merge-ort: add implementation of checkout()",
2020-12-13), largely due to its design depending on checkout() and
thus being influenced by the checkout code. However,
merge-recursive itself was not fixed here, in part because its
design meant it had difficulty differentiating between untracked
files, ignored files, leftover tracked files that haven't been
removed yet due to order of processing files, and files written by
itself due to collisions).
Make the conversion more complete by now handling read-tree and
handling at least the unpack_trees() portion of merge-recursive. While
merge-recursive is on its way out, fixing the unpack_trees() portion is
easy and facilitates some of the later changes in this series. Note
that fixing read-tree makes the --exclude-per-directory option to
read-tree useless, so we remove it from the documentation (though we
continue to accept it if passed).
The read-tree changes happen to fix a bug in t1013.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Noting that unpack_trees treats reset=1 & update=1 as license to nuke
untracked files, I looked for code paths that use this combination and
tried to generate testcases which demonstrated unintentional loss of
untracked files and directories. I found several.
I also include testcases for `git reset --{hard,merge,keep}`. A hard
reset is perhaps the most direct test of unpack_tree's reset=1 behavior,
but we cannot make `git reset --hard` preserve untracked files without
some migration work.
Also, the two commands `checkout --force` (because of the --force) and
`read-tree --reset` (because it's plumbing and we need to keep it
backward compatible) were left out as we expect those to continue
removing untracked files and directories.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "test_pause" and "debug" helpers to allow using the HOME and
TERM environment variables the user usually uses.
* pb/test-use-user-env:
test-lib-functions: keep user's debugger config files and TERM in 'debug'
test-lib-functions: optionally keep HOME, TERM and SHELL in 'test_pause'
test-lib-functions: use 'TEST_SHELL_PATH' in 'test_pause'
The "git apply -3" code path learned not to bother the lower level
merge machinery when the three-way merge can be trivially resolved
without the content level merge.
* jc/trivial-threeway-binary-merge:
apply: resolve trivial merge without hitting ll-merge with "--3way"
Doc update plus improved error reporting.
* jk/log-warn-on-bogus-encoding:
docs: use "character encoding" to refer to commit-object encoding
logmsg_reencode(): warn when iconv() fails
After "git clone --recurse-submodules", all submodules are cloned
but they are not by default recursed into by other commands. With
submodule.stickyRecursiveClone configuration set, submodule.recurse
configuration is set to true in a repository created by "clone"
with "--recurse-submodules" option.
* mk/clone-recurse-submodules:
clone: set submodule.recurse=true if submodule.stickyRecursiveClone enabled
The output from "git fast-export", when its anonymization feature
is in use, showed an annotated tag incorrectly.
* tk/fast-export-anonymized-tag-fix:
fast-export: fix anonymized tag using original length
Fixes on usage message from "git commit-graph".
* ab/commit-graph-usage:
commit-graph: show "unexpected subcommand" error
commit-graph: show usage on "commit-graph [write|verify] garbage"
commit-graph: early exit to "usage" on !argc
multi-pack-index: refactor "goto usage" pattern
commit-graph: use parse_options_concat()
commit-graph: remove redundant handling of -h
commit-graph: define common usage with a macro
Even when running "git send-email" without its own threaded
discussion support, a threading related header in one message is
carried over to the subsequent message to result in an unwanted
threading, which has been corrected.
* mh/send-email-reset-in-reply-to:
send-email: avoid incorrect header propagation
Buggy tests could damage repositories outside the throw-away test
area we created. We now by default export GIT_CEILING_DIRECTORIES
to limit the damage from such a stray test.
* sg/set-ceiling-during-tests:
test-lib: set GIT_CEILING_DIRECTORIES to protect the surrounding repository
"git upload-pack" which runs on the other side of "git fetch"
forgot to take the ref namespaces into account when handling
want-ref requests.
* ka/want-ref-in-namespace:
docs: clarify the interaction of transfer.hideRefs and namespaces
upload-pack.c: treat want-ref relative to namespace
t5730: introduce fetch command helper
The advice message that "git cherry-pick" gives when it asks
conflicted replay of a commit to be resolved by the end user has
been updated.
* zh/cherry-pick-advice:
cherry-pick: use better advice message
"git branch -D <branch>" used to refuse to remove a broken branch
ref that points at a missing commit, which has been corrected.
* rs/branch-allow-deleting-dangling:
branch: allow deleting dangling branches with --force
The delayed checkout code path in "git checkout" etc. were chatty
even when --quiet and/or --no-progress options were given.
* mt/quiet-with-delayed-checkout:
checkout: make delayed checkout respect --quiet and --no-progress
"git diff --relative" segfaulted and/or produced incorrect result
when there are unmerged paths.
* dd/diff-files-unmerged-fix:
diff-lib: ignore paths that are outside $cwd if --relative asked
"git maintenance" scheduler fix for macOS.
* js/maintenance-launchctl-fix:
maintenance: skip bootout/bootstrap when plist is registered
maintenance: create `launchctl` configuration using a lock file
Fix a regression in my c95e3a3f0b (send-email: move trivial config
handling to Perl, 2021-05-28) where we'd pick the first config key out
of multiple defined ones, instead of using the normal "last key wins"
semantics of "git config --get".
This broke e.g. cases where a .git/config would have a different
sendemail.smtpServer than ~/.gitconfig. We'd pick the ~/.gitconfig
over .git/config, instead of preferring the repository-local
version. The same would go for /etc/gitconfig etc.
The full list of impacted config keys (the %config_settings values
which are references to scalars, not arrays) is:
sendemail.smtpencryption
sendemail.smtpserver
sendemail.smtpserverport
sendemail.smtpuser
sendemail.smtppass
sendemail.smtpdomain
sendemail.smtpauth
sendemail.smtpbatchsize
sendemail.smtprelogindelay
sendemail.tocmd
sendemail.cccmd
sendemail.aliasfiletype
sendemail.envelopesender
sendemail.confirm
sendemail.from
sendemail.assume8bitencoding
sendemail.composeencoding
sendemail.transferencoding
sendemail.sendmailcmd
I.e. having any of these set in say ~/.gitconfig and in-repo
.git/config regressed in v2.33.0 to prefer the --global one over the
--local.
To test this add a test of config priority to one of these config
variables, most don't have tests at all, but there was an existing one
for sendemail.8bitEncoding.
The "git config" (instead of "test_config") is somewhat of an
anti-pattern, but follows established conventions in
t9001-send-email.sh, likewise with any other pattern or idiom in this
test.
The populating of home/.gitconfig and setting of HOME= is copied from
a test in t0017-env-helper.sh added in 1ff750b128 (tests: make
GIT_TEST_GETTEXT_POISON a boolean, 2019-06-21). This test fails
without this bugfix, but now it works.
Reported-by: Eli Schwartz <eschwartz@archlinux.org>
Tested-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'debug' function in test-lib-functions.sh is used to invoke a
debugger at a specific line in a test. It inherits the value of HOME and
TERM set by 'test-lib.sh': HOME="$TRASH_DIRECTORY" and TERM=dumb.
Changing the value of HOME means that any customization configured in a
developers' debugger configuration file (like $HOME/.gdbinit or
$HOME/.lldbinit) are not available in the debugger invoked by
'test_pause'.
Changing the value of TERM to 'dumb' means that colored output
is disabled in the debugger.
To make the debugging experience with 'debug' more pleasant, leverage
the variable USER_HOME, added in the previous commit, to copy a
developer's ~/.gdbinit and ~/.lldbinit to the test HOME. We do not set
HOME to USER_HOME as in 'test_pause' to avoid user configuration in
$USER_HOME/.gitconfig from interfering with the command being debugged.
Also, add a flag to launch the debugger with the original value of
TERM, and add the same warning as for 'test_pause'.
Helped-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'test_pause' function, which is designed to help interactive
debugging and exploration of tests, currently inherits the value of HOME
and TERM set by 'test-lib.sh': HOME="$TRASH_DIRECTORY" and TERM=dumb. It
also invokes the shell defined by TEST_SHELL_PATH, which defaults to
/bin/sh (through SHELL_PATH).
Changing the value of HOME means that any customization configured in a
developers' shell startup files and any Git aliases defined in their
global Git configuration file are not available in the shell invoked by
'test_pause'.
Changing the value of TERM to 'dumb' means that colored output
is disabled for all commands in that shell.
Using /bin/sh as the shell invoked by 'test_pause' is not ideal since
some platforms (i.e. Debian and derivatives) use Dash as /bin/sh, and
this shell is usually compiled without readline support, which makes for
a poor interactive command line experience.
To make the interactive command line experience in the shell invoked by
'test_pause' more pleasant, save the values of HOME and TERM in
USER_HOME and USER_TERM before changing them in test-lib.sh, and add
options to 'test_pause' to optionally use these variables to invoke the
shell. Also add an option to invoke SHELL instead of TEST_SHELL_PATH, so
that developer's interactive shell is used.
We use options instead of changing the behaviour unconditionally since
these three variables can slightly change command behaviour. Moreover,
using the original HOME means commands could overwrite files in a user's
home directory. Be explicit about these caveats in the new 'Usage'
section in test-lib-functions.sh.
Finally, add '[options]' to the test_pause synopsys in t/README, and
mention that the full list of helper functions and their options can be
found in test-lib-functions.sh.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
3f824e91c8 (t/Makefile: introduce TEST_SHELL_PATH, 2017-12-08)
made it easy to use a different shell for the tests than 'SHELL_PATH'
used at compile time. But 'test_pause' still invokes 'SHELL_PATH'.
If TEST_SHELL_PATH is set, invoke that shell in 'test_pause' for
consistency.
Suggested-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ll_binary_merge() function assumes that the ancestor blob is
different from either side of the new versions, and always fails
the merge in conflict, unless -Xours or -Xtheirs is in effect.
The normal "merge" machineries all resolve the trivial cases
(e.g. if our side changed while their side did not, the result
is ours) without triggering the file-level merge drivers, so the
assumption is warranted.
The code path in "git apply --3way", however, does not check for
the trivial three-way merge situation and always calls the
file-level merge drivers. This used to be perfectly OK back
when we always first attempted a straight patch application and
used the three-way code path only as a fallback. Any binary
patch that can be applied as a trivial three-way merge (e.g. the
patch is based exactly on the version we happen to have) would
always cleanly apply, so the ll_binary_merge() that is not
prepared to see the trivial case would not have to handle such a
case.
This no longer is true after we made "--3way" to mean "first try
three-way and then fall back to straight application", and made
"git apply -3" on a binary patch that is based on the current
version no longer apply.
Teach "git apply -3" to first check for the trivial merge cases
and resolve them without hitting the file-level merge drivers.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
[jc: stolen tests from Jerry's patch]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line completion updates.
* fc/completion-updates:
completion: bash: add correct suffix in variables
completion: bash: fix for multiple dash commands
completion: bash: fix for suboptions with value
completion: bash: fix prefix detection in branch.*
Various bugs in "git rebase -r" have been fixed.
* pw/rebase-r-fixes:
rebase -r: fix merge -c with a merge strategy
rebase -r: don't write .git/MERGE_MSG when fast-forwarding
rebase -i: add another reword test
rebase -r: make 'merge -c' behave like reword
Checking out all the paths from HEAD during the last conflicted
step in "git rebase" and continuing would cause the step to be
skipped (which is expected), but leaves MERGE_MSG file behind in
$GIT_DIR and confuses the next "git commit", which has been
corrected.
* pw/rebase-skip-final-fix:
rebase --continue: remove .git/MERGE_MSG
rebase --apply: restore some tests
t3403: fix commit authorship
"git commit --fixup" now works with "--edit" again, after it was
broken in v2.32.
* jk/commit-edit-fixup-fix:
commit: restore --edit when combined with --fixup
The revision traversal API has been optimized by taking advantage
of the commit-graph, when available, to determine if a commit is
reachable from any of the existing refs.
* ps/connectivity-optim:
revision: avoid hitting packfiles when commits are in commit-graph
commit-graph: split out function to search commit position
revision: stop retrieving reference twice
connected: do not sort input revisions
revision: separate walk and unsorted flags
When 'upload-pack' runs within the context of a git namespace, treat any
'want-ref' lines the client sends as relative to that namespace.
Also check if the wanted ref is hidden via 'hideRefs'. If it is hidden,
respond with an error as if the ref didn't exist.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Kim Altintop <kim@eagain.st>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Assembling a "raw" fetch command to be fed directly to "test-tool serve-v2"
is extracted into a test helper.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kim Altintop <kim@eagain.st>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"enum" keyword will be introduced in PHP 8.1.
https://wiki.php.net/rfc/enumerations
Signed-off-by: USAMI Kenta <tadsan@zonu.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7f40759496 (fast-export: tighten anonymize_mem() interface to
handle only strings, 2020-06-23) changed the interface used in anonymizing
strings, but failed to update the size of annotated tag messages to match
the new anonymized string.
As a result, exporting tags having messages longer than 13 characters
would create output that couldn't be parsed by fast-import,
as the data length indicated was larger than the data output.
Reset the message size when anonymizing, and add a tag with a "long"
message to the test.
Signed-off-by: Tal Kelrich <hasturkun@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bring the "commit-graph" command in line with the error output and
general pattern in cmd_multi_pack_index().
Let's test for that output, and also cover the same potential bug as
was fixed in the multi-pack-index command in
88617d11f9 (multi-pack-index: fix potential segfault without
sub-command, 2021-07-19).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the parse_options() invocation in the commit-graph code to
error on unknown leftover argv elements, in addition to the existing
and implicit erroring via parse_options() on unknown options.
We'd already error in cmd_commit_graph() on e.g.:
git commit-graph unknown verify
git commit-graph --unknown verify
But here we're calling parse_options() twice more for the "write" and
"verify" subcommands. We did not do the same checking for leftover
argv elements there. As a result we'd silently accept garbage in these
subcommands, let's not do that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current implementation of GIT_TEST_FAIL_PREREQS is broken in
that checking for the lack of a prerequisite would not work. Avoid
the use of "if ! test_have_prereq X" in a test script.
* bc/t5607-avoid-broken-test-fail-prereqs:
t5607: avoid using prerequisites to select algorithm
"git apply" miscounted the bytes and failed to read to the end of
binary hunks.
* jk/apply-binary-hunk-parsing-fix:
apply: keep buffer/size pair in sync when parsing binary hunks
"git pull" had various corner cases that were not well thought out
around its --rebase backend, e.g. "git pull --ff-only" did not stop
but went ahead and rebased when the history on other side is not a
descendant of our history. The series tries to fix them up.
* en/pull-conflicting-options:
pull: fix handling of multiple heads
pull: update docs & code for option compatibility with rebasing
pull: abort by default when fast-forwarding is not possible
pull: make --rebase and --no-rebase override pull.ff=only
pull: since --ff-only overrides, handle it first
pull: abort if --ff-only is given and fast-forwarding is impossible
t7601: add tests of interactions with multiple merge heads and config
t7601: test interaction of merge/rebase/fast-forward flags and options
Based on current experience, when running git clone --recurse-submodules,
developers do not expect other commands such as pull or checkout to run
recursively into active submodules. However, setting submodule.recurse=true
at this step could make for a simpler workflow by eliminating the need for
the --recurse-submodules option in subsequent commands. To collect more
data on developers' preference in regards to making submodule.recurse=true
a default config value in the future, deploy this feature under the opt in
submodule.stickyRecursiveClone flag.
Signed-off-by: Mahi Kolla <mkolla2@illinois.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If multiple independent patches are sent with send-email, even if the
"In-Reply-To" and "References" headers are not managed by --thread or
--in-reply-to, their values may be propagated from prior patches to
subsequent patches with no such headers defined.
To mitigate this and potential future issues, make sure all global
patch-specific variables are always either handled by
command-specific code (e.g. threading), or are reset to their default
values for every iteration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
