In some "simple" centralized workflows, users expect remote tracking
branch names to match local branch names. "git push" pushes to the
remote version/instance of the branch, and "git pull" pulls any changes
to the remote branch (changes made by the same user in another place, or
by other users).
This expectation is supported by the push.default default option "simple"
which refuses a default push for a mismatching tracking branch name, and
by the new branch.autosetupmerge option, "simple", which only sets up
remote tracking for same-name remote branches.
When a new branch has been created by the user and has not yet been
pushed (and push.default is not set to "current"), the user is prompted
with a "The current branch %s has no upstream branch" error, and
instructions on how to push and add tracking.
This error is helpful in that following the advice once per branch
"resolves" the issue for that branch forever, but inconvenient in that
for the "simple" centralized workflow, this is always the right thing to
do, so it would be better to just do it.
Support this workflow with a new config setting, push.autoSetupRemote,
which will cause a default push, when there is no remote tracking branch
configured, to push to the same-name on the remote and --set-upstream.
Also add a hint offering this new option when the "The current branch %s
has no upstream branch" error is encountered, and add corresponding tests.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the default push.default option, "simple", beginners are
protected from accidentally pushing to the "wrong" branch in
centralized workflows: if the remote tracking branch they would push
to does not have the same name as the local branch, and they try to do
a "default push", they get an error and explanation with options.
There is a particular centralized workflow where this often happens:
a user branches to a new local topic branch from an existing
remote branch, eg with "checkout -b feature1 origin/master". With
the default branch.autosetupmerge configuration (value "true"), git
will automatically add origin/master as the upstream tracking branch.
When the user pushes with a default "git push", with the intention of
pushing their (new) topic branch to the remote, they get an error, and
(amongst other things) a suggestion to run "git push origin HEAD".
If they follow this suggestion the push succeeds, but on subsequent
default pushes they continue to get an error - so eventually they
figure out to add "-u" to change the tracking branch, or they spelunk
the push.default config doc as proposed and set it to "current", or
some GUI tooling does one or the other of these things for them.
When one of their coworkers later works on the same topic branch,
they don't get any of that "weirdness". They just "git checkout
feature1" and everything works exactly as they expect, with the shared
remote branch set up as remote tracking branch, and push and pull
working out of the box.
The "stable state" for this way of working is that local branches have
the same-name remote tracking branch (origin/feature1 in this
example), and multiple people can work on that remote feature branch
at the same time, trusting "git pull" to merge or rebase as required
for them to be able to push their interim changes to that same feature
branch on that same remote.
(merging from the upstream "master" branch, and merging back to it,
are separate more involved processes in this flow).
There is a problem in this flow/way of working, however, which is that
the first user, when they first branched from origin/master, ended up
with the "wrong" remote tracking branch (different from the stable
state). For a while, before they pushed (and maybe longer, if they
don't use -u/--set-upstream), their "git pull" wasn't getting other
users' changes to the feature branch - it was getting any changes from
the remote "master" branch instead (a completely different class of
changes!)
An experienced git user might say "well yeah, that's what it means to
have the remote tracking branch set to origin/master!" - but the
original user above didn't *ask* to have the remote master branch
added as remote tracking branch - that just happened automatically
when they branched their feature branch. They didn't necessarily even
notice or understand the meaning of the "set up to track 'origin/master'"
message when they created the branch - especially if they are using a
GUI.
Looking at how to fix this, you might think "OK, so disable auto setup
of remote tracking - set branch.autosetupmerge to false" - but that
will inconvenience the *second* user in this story - the one who just
wanted to start working on the topic branch. The first and second
users swap roles at different points in time of course - they should
both have a sane configuration that does the right thing in both
situations.
Make this "branches have the same name locally as on the remote"
workflow less painful / more obvious by introducing a new
branch.autosetupmerge option called "simple", to match the same-name
"push.default" option that makes similar assumptions.
This new option automatically sets up tracking in a *subset* of the
current default situations: when the original ref is a remote tracking
branch *and* has the same branch name on the remote (as the new local
branch name).
Update the error displayed when the 'push.default=simple' configuration
rejects a mismatching-upstream-name default push, to offer this new
branch.autosetupmerge option that will prevent this class of error.
With this new configuration, in the example situation above, the first
user does *not* get origin/master set up as the tracking branch for
the new local branch. If they "git pull" in their new local-only
branch, they get an error explaining there is no upstream branch -
which makes sense and is helpful. If they "git push", they get an
error explaining how to push *and* suggesting they specify
--set-upstream - which is exactly the right thing to do for them.
This new option is likely not appropriate for users intentionally
implementing a "triangular workflow" with a shared upstream tracking
branch, that they "git pull" in and a "private" feature branch that
they push/force-push to just for remote safe-keeping until they are
ready to push up to the shared branch explicitly/separately. Such
users are likely to prefer keeping the current default
merge.autosetupmerge=true behavior, and change their push.default to
"current".
Also extend the existing branch tests with three new cases testing
this option - the obvious matching-name and non-matching-name cases,
and also a non-matching-ref-type case. The matching-name case needs to
temporarily create an independent repo to fetch from, as the general
strategy of using the local repo as the remote in these tests
precludes locally branching with the same name as in the "remote".
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regression fix for 2.36 where "git name-rev" started to sometimes
reference strings after they are freed.
* rs/name-rev-fix-free-after-use:
Revert "name-rev: release unused name strings"
"diff-tree --stdin" has been broken for about a year, but 2.36
release broke it even worse by breaking running the command with
<pathspec>, which in turn broke "gitk" and got noticed. This has
been corrected by aligning its behaviour to that of "log".
* jc/diff-tree-stdin-fix:
2.36 gitk/diff-tree --stdin regression fix
"git submodule update" without pathspec should silently skip an
uninitialized submodule, but it started to become noisy by mistake.
* gc/submodule-update-part2:
submodule--helper: fix initialization of warn_if_uninitialized
The .warn_if_uninitialized member was introduced by 48308681
(git submodule update: have a dedicated helper for cloning,
2016-02-29) to submodule_update_clone struct and initialized to
false. When c9911c93 (submodule--helper: teach update_data more
options, 2022-03-15) moved it to update_data struct, it started
to initialize it to true but this change was not explained in
its log message.
The member is set to true only when pathspec was given, and is
used when a submodule that matched the pathspec is found
uninitialized to give diagnostic message. "submodule update"
without pathspec is supposed to iterate over all submodules
(i.e. without pathspec limitation) and update only the
initialized submodules, and finding uninitialized submodules
during the iteration is a totally expected and normal thing that
should not be warned.
[jc: added tests]
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This only surfaced as a regression after 2.36 release, but the
breakage was already there with us for at least a year.
The diff_free() call is to be used after we completely finished with
a diffopt structure. After "git diff A B" finishes producing
output, calling it before process exit is fine. But there are
commands that prepares diff_options struct once, compares two sets
of paths, releases resources that were used to do the comparison,
then reuses the same diff_option struct to go on to compare the next
two sets of paths, like "git log -p".
After "git log -p" finishes showing a single commit, calling it
before it goes on to the next commit is NOT fine. There is a
mechanism, the .no_free member in diff_options struct, to help "git
log" to avoid calling diff_free() after showing each commit and
instead call it just one. When the mechanism was introduced in
e900d494 (diff: add an API for deferred freeing, 2021-02-11),
however, we forgot to do the same to "diff-tree --stdin", which *is*
a moral equivalent to "git log".
During 2.36 release cycle, we started clearing the pathspec in
diff_free(), so programs like gitk that runs
git diff-tree --stdin -- <pathspec>
downstream of a pipe, processing one commit after another, started
showing irrelevant comparison outside the given <pathspec> from the
second commit. The same commit, by forgetting to teach the .no_free
mechanism, broke "diff-tree --stdin -I<regexp>" and nobody noticed
it for over a year, presumably because it is so seldom used an
option.
But <pathspec> is a different story. The breakage was very
prominently visible and was reported immediately after 2.36 was
released.
Fix this breakage by mimicking how "git log" utilizes the .no_free
member so that "diff-tree --stdin" behaves more similarly to "log".
Protect the fix with a few new tests.
Reported-by: Matthias Aßhauer <mha1993@live.de>
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 2d53975488.
3656f84278 (name-rev: prefer shorter names over following merges,
2021-12-04) broke the assumption of 2d53975488 (name-rev: release unused
name strings, 2020-02-04) that a better name for a child is a better
name for all of its ancestors as well, because it added a penalty for
generation > 0. This leads to strings being free(3)'d that are still
needed.
079f970971 (name-rev: sort tip names before applying, 2020-02-05)
already reduced the number of free(3) calls for the use case that
motivated the original patch (name-rev --all in the Chromium repository)
from ca. 44000 to 5, and 3656f84278 eliminated even those few. So this
revert won't affect name-rev's performance on that particular repo.
Reported-by: Thomas Hurst <tom@hur.st>
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
String in submodule--helper is not correctly formatting
placeholders. The string in git-send-email is partial.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The missing space at the end of the line makes the closing square
bracket sticking to the dash in the next line
Found during localisation v2.36.0 round 1
Signed-off-by: Fangyi Zhou <me@fangyi.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-tree" learns "--oid-only" option, similar to "--name-only",
and more generalized "--format" option.
source: <cover.1648026472.git.dyroneteng@gmail.com>
* tl/ls-tree-oid-only:
ls-tree: `-l` should not imply recursive listing
In 9c4d58ff2c (ls-tree: split up "fast path" callbacks, 2022-03-23), a
refactoring of the various read_tree_at() callbacks caused us to
unconditionally recurse into directories if `-l` (long format) was
passed on the command line, regardless of whether or not we also pass
the `-r` (recursive) flag.
Fix this by making show_tree_long() return the value of `recurse`,
rather than always returning 1. This value is interpreted by
read_tree_at() to be a signal on whether or not to recurse.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree list --porcelain" did not c-quote pathnames and lock
reasons with unsafe bytes correctly, which is worked around by
introducing NUL terminated output format with "-z".
* pw/worktree-list-with-z:
worktree: add -z option for list subcommand
Built-in fsmonitor (part 2).
* jh/builtin-fsmonitor-part2: (30 commits)
t7527: test status with untracked-cache and fsmonitor--daemon
fsmonitor: force update index after large responses
fsmonitor--daemon: use a cookie file to sync with file system
fsmonitor--daemon: periodically truncate list of modified files
t/perf/p7519: add fsmonitor--daemon test cases
t/perf/p7519: speed up test on Windows
t/perf/p7519: fix coding style
t/helper/test-chmtime: skip directories on Windows
t/perf: avoid copying builtin fsmonitor files into test repo
t7527: create test for fsmonitor--daemon
t/helper/fsmonitor-client: create IPC client to talk to FSMonitor Daemon
help: include fsmonitor--daemon feature flag in version info
fsmonitor--daemon: implement handle_client callback
compat/fsmonitor/fsm-listen-darwin: implement FSEvent listener on MacOS
compat/fsmonitor/fsm-listen-darwin: add MacOS header files for FSEvent
compat/fsmonitor/fsm-listen-win32: implement FSMonitor backend on Windows
fsmonitor--daemon: create token-based changed path cache
fsmonitor--daemon: define token-ids
fsmonitor--daemon: add pathname classification
fsmonitor--daemon: implement 'start' command
...
"git fetch --refetch" learned to fetch everything without telling
the other side what we already have, which is useful when you
cannot trust what you have in the local object store.
* rc/fetch-refetch:
docs: mention --refetch fetch option
fetch: after refetch, encourage auto gc repacking
t5615-partial-clone: add test for fetch --refetch
fetch: add --refetch option
builtin/fetch-pack: add --refetch option
fetch-pack: add refetch
fetch-negotiator: add specific noop initializer
"git am" can read from the standard input when no mailbox is given
on the command line, but the end-user gets no indication when it
happens, making Git appear stuck.
* jc/mailsplit-warn-on-tty:
am/apply: warn if we end up reading patches from terminal
A handful of obvious clean-ups around a topic that is already in
'master'.
* gc/branch-recurse-submodules-fix:
branch.c: simplify advice-and-die sequence
branch: rework comments for future developers
branch: remove negative exit code
branch --set-upstream-to: be consistent when advising
branch: give submodule updating advice before exit
branch: support more tracking modes when recursing
Move more "git submodule update" to C.
* gc/submodule-update-part2:
submodule--helper: remove forward declaration
submodule: move core cmd_update() logic to C
submodule--helper: reduce logic in run_update_procedure()
submodule--helper: teach update_data more options
builtin/submodule--helper.c: rename option struct to "opt"
submodule update: use die_message()
submodule--helper: run update using child process struct
Code clean-up.
* ds/partial-bundle-more:
pack-objects: lazily set up "struct rev_info", don't leak
bundle: output hash information in 'verify'
bundle: move capabilities to end of 'verify'
pack-objects: parse --filter directly into revs.filter
pack-objects: move revs out of get_object_list()
list-objects-filter: remove CL_ARG__FILTER
"git ls-tree" learns "--oid-only" option, similar to "--name-only",
and more generalized "--format" option.
* tl/ls-tree-oid-only:
ls-tree: split up "fast path" callbacks
ls-tree: detect and error on --name-only --name-status
ls-tree: support --object-only option for "git-ls-tree"
ls-tree: introduce "--format" option
cocci: allow padding with `strbuf_addf()`
ls-tree: introduce struct "show_tree_data"
ls-tree: slightly refactor `show_tree()`
ls-tree: fix "--name-only" and "--long" combined use bug
ls-tree: simplify nesting if/else logic in "show_tree()"
ls-tree: rename "retval" to "recurse" in "show_tree()"
ls-tree: use "size_t", not "int" for "struct strbuf"'s "len"
ls-tree: use "enum object_type", not {blob,tree,commit}_type
ls-tree: add missing braces to "else" arms
ls-tree: remove commented-out code
ls-tree tests: add tests for --name-status
"git reflog" command now uses parse-options API to parse its
command line options.
* ab/reflog-parse-options:
reflog: fix 'show' subcommand's argv
reflog [show]: display sensible -h output
reflog: convert to parse_options() API
reflog exists: use parse_options() API
git reflog [expire|delete]: make -h output consistent with SYNOPSIS
reflog: move "usage" variables and use macros
reflog tests: add missing "git reflog exists" tests
reflog: refactor cmd_reflog() to "if" branches
reflog.c: indent argument lists
* ab/usage-die-message:
config API: use get_error_routine(), not vreportf()
usage.c + gc: add and use a die_message_errno()
gc: return from cmd_gc(), don't call exit()
usage.c API users: use die_message() for error() + exit 128
usage.c API users: use die_message() for "fatal :" + exit 128
usage.c: add a die_message() routine
Add a -z option to be used in conjunction with --porcelain that gives
NUL-terminated output. As 'worktree list --porcelain' does not quote
worktree paths this enables it to handle worktree paths that contain
newlines.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash" does not allow subcommands it internally runs as its
implementation detail, except for "git reset", to emit messages;
now "git reset" part has also been squelched.
* vd/stash-silence-reset:
reset: show --no-refresh in the short-help
reset: remove 'reset.refresh' config option
reset: remove 'reset.quiet' config option
reset: do not make '--quiet' disable index refresh
stash: make internal resets quiet and refresh index
reset: suppress '--no-refresh' advice if logging is silenced
reset: replace '--quiet' with '--no-refresh' in performance advice
reset: introduce --[no-]refresh option to --mixed
reset: revise index refresh advice
"git branch --recurse-submodules" does not propagate "--track=inherit"
or "--no-track" to submodules, which causes submodule branches to use
the wrong tracking mode [1]. To fix this, pass the correct options to
the "submodule--helper create-branch" child process and test for it.
While we are refactoring the same code, replace "--track" with the
synonymous, but more consistent-looking "--track=direct" option
(introduced at the same time as "--track=inherit", d3115660b4 (branch:
add flags and config to inherit tracking, 2021-12-20)).
[1] This bug is partially a timing issue: "branch --recurse-submodules"
was introduced around the same time as "--track=inherit", and even
though I rebased "branch --recurse-submodules" on top of that, I had
neglected to support the new tracking mode. Omitting "--no-track"
was just a plain old mistake, though.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase $base $non_branch_commit", when $base is an ancestor or
the $non_branch_commit, modified the current branch, which has been
corrected.
* jc/rebase-detach-fix:
rebase: set REF_HEAD_DETACH in checkout_up_to_date()
rebase: use test_commit helper in setup
The worktree repair command was not added to the usage menu for the
worktree command. This commit adds the usage of 'worktree repair'
according to the existing docs.
Signed-off-by: Des Preston <despreston@gmail.com>
Acked-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_reflog() invokes parse_options() with PARSE_OPT_KEEP_ARGV0, but it
doesn't account for the retained argv[0] before invoking
cmd_reflog_show() to handle the 'git reflog show' subcommand.
Consequently, cmd_reflog_show() always gets an 'argv' array starting
with elements argv[0]="reflog" and argv[1]="show".
Strip the name of the git command from the 'argv' array before passing
it to the function handling the 'show' subcommand.
There is no user-visible bug here, because cmd_reflog_show() doesn't
have any options or parameters of its own.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After invoking `fetch --refetch`, the object db will likely contain many
duplicate objects. If auto-maintenance is enabled, invoke it with
appropriate settings to encourage repacking/consolidation.
* gc.autoPackLimit: unless this is set to 0 (disabled), override the
value to 1 to force pack consolidation.
* maintenance.incremental-repack.auto: unless this is set to 0, override
the value to -1 to force incremental repacking.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fetch and transports the --refetch option to force a full fetch
without negotiating common commits with the remote. Use when applying a
new partial clone filter to refetch all matching objects.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a refetch option to fetch-pack to force a full fetch. Use when
applying a new partial clone filter to refetch all matching objects.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding [1] (pack-objects: move revs out of
get_object_list(), 2022-03-22) the "repo_init_revisions()" was moved
to cmd_pack_objects() so that it unconditionally took place for all
invocations of "git pack-objects".
We'd thus start leaking memory, which is easily reproduced in
e.g. git.git by feeding e83c516331 (Initial revision of "git", the
information manager from hell, 2005-04-07) to "git pack-objects";
$ echo e83c516331 | ./git pack-objects initial
[...]
==19130==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 7120 byte(s) in 1 object(s) allocated from:
#0 0x455308 in __interceptor_malloc (/home/avar/g/git/git+0x455308)
#1 0x75b399 in do_xmalloc /home/avar/g/git/wrapper.c:41:8
#2 0x75b356 in xmalloc /home/avar/g/git/wrapper.c:62:9
#3 0x5d7609 in prep_parse_options /home/avar/g/git/diff.c:5647:2
#4 0x5d415a in repo_diff_setup /home/avar/g/git/diff.c:4621:2
#5 0x6dffbb in repo_init_revisions /home/avar/g/git/revision.c:1853:2
#6 0x4f599d in cmd_pack_objects /home/avar/g/git/builtin/pack-objects.c:3980:2
#7 0x4592ca in run_builtin /home/avar/g/git/git.c:465:11
#8 0x457d81 in handle_builtin /home/avar/g/git/git.c:718:3
#9 0x458ca5 in run_argv /home/avar/g/git/git.c:785:4
#10 0x457b40 in cmd_main /home/avar/g/git/git.c:916:19
#11 0x562259 in main /home/avar/g/git/common-main.c:56:11
#12 0x7fce792ac7ec in __libc_start_main csu/../csu/libc-start.c:332:16
#13 0x4300f9 in _start (/home/avar/g/git/git+0x4300f9)
SUMMARY: LeakSanitizer: 7120 byte(s) leaked in 1 allocation(s).
Aborted
Narrowly fixing that commit would have been easy, just add call
repo_init_revisions() right before get_object_list(), which is
effectively what was done before that commit.
But an unstated constraint when setting it up early is that it was
needed for the subsequent [2] (pack-objects: parse --filter directly
into revs.filter, 2022-03-22), i.e. we might have a --filter
command-line option, and need to either have the "struct rev_info"
setup when we encounter that option, or later.
Let's just change the control flow so that we'll instead set up the
"struct rev_info" only when we need it. Doing so leads to a bit more
verbosity, but it's a lot clearer what we're doing and why.
An earlier version of this commit[3] went behind
opt_parse_list_objects_filter()'s back by faking up a "struct option"
before calling it. Let's avoid that and instead create a blessed API
for this pattern.
We could furthermore combine the two get_object_list() invocations
here by having repo_init_revisions() invoked on &pfd.revs, but I think
clearly separating the two makes the flow clearer. Likewise
redundantly but explicitly (i.e. redundant v.s. a "{ 0 }") "0" to
"have_revs" early in cmd_pack_objects().
While we're at it add parentheses around the arguments to the OPT_*
macros in in list-objects-filter-options.h, as we need to change those
lines anyway. It doesn't matter in this case, but is good general
practice.
1. https://lore.kernel.org/git/619b757d98465dbc4995bdc11a5282fbfcbd3daa.1647970119.git.gitgitgadget@gmail.com
2. https://lore.kernel.org/git/97de926904988b89b5663bd4c59c011a1723a8f5.1647970119.git.gitgitgadget@gmail.com
3. https://lore.kernel.org/git/patch-1.1-193534b0f07-20220325T121715Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git fetch --recurse-submodules" grabbed submodule commits
that would be needed to recursively check out newly fetched commits
in the superproject, it only paid attention to submodules that are
in the current checkout of the superproject. We now do so for all
submodules that have been run "git submodule init" on.
* gc/recursive-fetch-with-unused-submodules:
submodule: fix latent check_has_commit() bug
fetch: fetch unpopulated, changed submodules
submodule: move logic into fetch_task_create()
submodule: extract get_fetch_task()
submodule: store new submodule commits oid_array in a struct
submodule: inline submodule_commits() into caller
submodule: make static functions read submodules from commits
t5526: create superproject commits with test helper
t5526: stop asserting on stderr literally
t5526: introduce test helper to assert on fetches
Replace core.fsyncObjectFiles with two new configuration variables,
core.fsync and core.fsyncMethod.
* ns/core-fsyncmethod:
core.fsync: documentation and user-friendly aggregate options
core.fsync: new option to harden the index
core.fsync: add configuration parsing
core.fsync: introduce granular fsync control infrastructure
core.fsyncmethod: add writeout-only mode
wrapper: make inclusion of Windows csprng header tightly scoped
Teach fsmonitor--daemon client threads to create a cookie file
inside the .git directory and then wait until FS events for the
cookie are observed by the FS listener thread.
This helps address the racy nature of file system events by
blocking the client response until the kernel has drained any
event backlog.
This is especially important on MacOS where kernel events are
only issued with a limited frequency. See the `latency` argument
of `FSeventStreamCreate()`. The kernel only signals every `latency`
seconds, but does not guarantee that the kernel queue is completely
drained, so we may have to wait more than one interval. If we
increase the latency, the system is more likely to drop events.
We avoid these issues by having each client thread create a unique
cookie file and then wait until it is seen in the event stream.
Co-authored-by: Kevin Willford <Kevin.Willford@microsoft.com>
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsmonitor--daemon to periodically truncate the list of
modified files to save some memory.
Clients will ask for the set of changes relative to a token that they
found in the FSMN index extension in the index. (This token is like a
point in time, but different). Clients will then update the index to
contain the response token (so that subsequent commands will be
relative to this new token).
Therefore, the daemon can gradually truncate the in-memory list of
changed paths as they become obsolete (older than the previous token).
Since we may have multiple clients making concurrent requests with a
skew of tokens and clients may be racing to the talk to the daemon,
we lazily truncate the list.
We introduce a 5 minute delay and truncate batches 5 minutes after
they are considered obsolete.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsmonitor--daemon to respond to IPC requests from client
Git processes and respond with a list of modified pathnames
relative to the provided token.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsmonitor--daemon to build a list of changed paths and associate
them with a token-id. This will be used by the platform-specific
backends to accumulate changed paths in response to filesystem events.
The platform-specific file system listener thread receives file system
events containing one or more changed pathnames (with whatever
bucketing or grouping that is convenient for the file system). These
paths are accumulated (without locking) by the file system layer into
a `fsmonitor_batch`.
When the file system layer has drained the kernel event queue, it will
"publish" them to our token queue and make them visible to concurrent
client worker threads. The token layer is free to combine and/or de-dup
paths within these batches for efficient presentation to clients.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsmonitor--daemon to create token-ids and define the
overall token naming scheme.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsmonitor--daemon to classify relative and absolute
pathnames and decide how they should be handled. This will
be used by the platform-specific backend to respond to each
filesystem event.
When we register for filesystem notifications on a directory,
we get events for everything (recursively) in the directory.
We want to report to clients changes to tracked and untracked
paths within the working directory proper. We do not want to
report changes within the .git directory, for example.
This classification will be used in a later commit by the
different backends to classify paths as events are received.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement 'git fsmonitor--daemon start' command. This command starts
an instance of 'git fsmonitor--daemon run' in the background using
the new 'start_bg_command()' function.
We avoid the fork-and-call technique on Unix systems in favor of a
fork-and-exec technique. This gives us more uniform Trace2 child-*
events. It also makes our usage more consistent with Windows usage.
On Windows, teach 'git fsmonitor--daemon run' to optionally call
'FreeConsole()' to release handles to the inherited Win32 console
(despite being passed invalid handles for stdin/out/err). Without
this, command prompts and powershell terminal windows could hang
in "exit" until the last background child process exited or released
their Win32 console handle. (This was not seen with git-bash shells
because they don't have a Win32 console attached to them.)
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement `run` command to try to begin listening for file system events.
This version defines the thread structure with a single fsmonitor_fs_listen
thread to watch for file system events and a simple IPC thread pool to
watch for connection from Git clients over a well-known named pipe or
Unix domain socket.
This commit does not actually do anything yet because the platform
backends are still just stubs.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement `stop` and `status` client commands to control and query the
status of a `fsmonitor--daemon` server process (and implicitly start a
server process if necessary).
Later commits will implement the actual server and monitor the file
system.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a built-in file system monitoring daemon that can be used by
the existing `fsmonitor` feature (protocol API and index extension)
to improve the performance of various Git commands, such as `status`.
The `fsmonitor--daemon` feature builds upon the `Simple IPC` API and
provides an alternative to hook access to existing fsmonitors such
as `watchman`.
This commit merely adds the new command without any functionality.
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move fsmonitor config settings to a new and opaque
`struct fsmonitor_settings` structure. Add a lazily-loaded pointer
to this into `struct repo_settings`
Create an `enum fsmonitor_mode` type in `struct fsmonitor_settings` to
represent the state of fsmonitor. This lets us represent which, if
any, fsmonitor provider (hook or IPC) is enabled.
Create `fsm_settings__get_*()` getters to lazily look up fsmonitor-
related config settings.
Get rid of the `core_fsmonitor` global variable. Move the code to
lookup the existing `core.fsmonitor` config value into the fsmonitor
settings.
Create a hook pathname variable in `struct fsmonitor-settings` and
only set it when in hook mode.
Extend the definition of `core.fsmonitor` to be either a boolean
or a hook pathname. When true, the builtin FSMonitor is used.
When false or unset, no FSMonitor (neither builtin nor hook) is
used.
The existing `core_fsmonitor` global variable was used to store the
pathname to the fsmonitor hook *and* it was used as a boolean to see
if fsmonitor was enabled. This dual usage and global visibility leads
to confusion when we add the IPC-based provider. So lets hide the
details in fsmonitor-settings.c and let it decide which provider to
use in the case of multiple settings. This avoids cluttering up
repo-settings.c with these private details.
A future commit in builtin-fsmonitor series will add the ability to
disqualify worktrees for various reasons, such as being mounted from a
remote volume, where fsmonitor should not be started. Having the
config settings hidden in fsmonitor-settings.c allows such worktree
restrictions to override the config values used.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the short help output from "git reset -h", the recently added
"--[no-]refresh" option is shown like so:
--refresh skip refreshing the index after reset
which explains what happens when the option is given in the negative
form, i.e. "--no-refresh". We could rephrase the explanation to
read "refresh the index after reset (default)" to hint that the user
can say "--no-refresh" to override the default, but listing the
"--no-refresh" form in the list of options would be more helpful.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Acked-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "git reflog show -h" output to show the usage summary
relevant to it, rather than displaying the same output that "git log
-h" would show.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue the work started in 33d7bdd645 (builtin/reflog.c: use
parse-options api for expire, delete subcommands, 2022-01-06) and
convert the cmd_reflog() function itself to use the parse_options()
API.
Let's also add a test which would fail if we forgot
PARSE_OPT_NO_INTERNAL_HELP here, as well as making sure that we'll
still pass through "--" by supplying PARSE_OPT_KEEP_DASHDASH. For that
test we need to change "test_commit()" to accept files starting with
"--".
The "git reflog -h" usage will now show the usage for all of the
sub-commands, rather than a terse summary which wasn't
correct (e.g. "git reflog exists" is not a valid command). See my
8757b35d44 (commit-graph: define common usage with a macro,
2021-08-23) for prior art.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
