This information is easily accessible when we are
calculating the relationship. The only reason not to print
it all the time is that it consumes a fair bit of screen
space, and may not be of interest to the user.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/name-branch:
Don't permit ref/branch names to end with ".lock"
check_ref_format(): tighten refname rules
strbuf_check_branch_ref(): a helper to check a refname for a branch
Fix branch -m @{-1} newname
check-ref-format --branch: give Porcelain a way to grok branch shorthand
strbuf_branchname(): a wrapper for branch name shorthands
Rename interpret/substitute nth_last_branch functions
Conflicts:
Documentation/git-check-ref-format.txt
This changes the rules for refnames to forbid:
(1) a refname that contains "@{" in it.
Some people and foreign SCM converter may have named their branches
as frotz@24 and we still want to keep supporting it.
However, "git branch frotz@{24}" is a disaster. It cannot even
checked out because "git checkout frotz@{24}" will interpret it as
"detach the HEAD at twenty-fourth reflog entry of the frotz branch".
(2) a refname that ends with a dot.
We already reject a path component that begins with a dot, primarily
to avoid ambiguous range interpretation. If we allowed ".B" as a
valid ref, it is unclear if "A...B" means "in dot-B but not in A" or
"either in A or B but not in both".
But for this to be complete, we need also to forbid "A." to avoid "in
B but not in A-dot". This was not a problem in the original range
notation, but we should have added this restriction when three-dot
notation was introduced.
Unlike "no dot at the beginning of any path component" rule, this
rule does not have to be "no dot at the end of any path component",
because you cannot abbreviate the tail end away, similar to you can
say "dot-B" to mean "refs/heads/dot-B".
For these reasons, it is not likely people created branches with these
names on purpose, but we have allowed such names to be used for quite some
time, and it is possible that people created such branches by mistake or
by accident.
To help people with branches with such unfortunate names to recover,
we still allow "branch -d 'bad.'" to delete such branches, and also allow
"branch -m bad. good" to rename them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows a common calling sequence
strbuf_branchname(&ref, name);
strbuf_splice(&ref, 0, 0, "refs/heads/", 11);
if (check_ref_format(ref.buf))
die(...);
to be refactored into
if (strbuf_check_branch_ref(&ref, name))
die(...);
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command is supposed to rename the branch we were on before switched
from to a new name, but was not aware of the short-hand notation we added
recently.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function takes a user-supplied string that is supposed to be a branch
name, and puts it in a strbuf after expanding possible shorthand notation.
A handful of open coded sequence to do this in the existing code have been
changed to use this helper function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These allow you to say "git checkout @{-2}" to switch to the branch two
"branch switching" ago by pretending as if you typed the name of that
branch. As it is likely that we will be introducing more short-hands to
write the name of a branch without writing it explicitly, rename the
functions from "nth_last_branch" to more generic "branch_name", to prepare
for different semantics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it more pleasant to read about a branch deletion by adding "was".
Jeff King suggested this, and I ignored it. He was right.
Update t3200 test again to match the change in output.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/branch-symref:
add basic branch display tests
branch: clean up repeated strlen
Avoid segfault with 'git branch' when the HEAD is detached
builtin-branch: improve output when displaying remote branches
Conflicts:
builtin-branch.c
Commit 45e2b61 fixed the initialization of a "len" struct
parameter via strlen. We can use that to clean up what is
now 3 strlens in a 6-line sequence.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent addition to the ref_item struct was not taken care of, leading
to a segmentation fault when accessing the (uninitialized) "dest" member.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the new "@{-1} syntax to refer to the previous branch to "git
branch". After looking at somebody's faulty patch series on a topic
branch too long, if you decide it is not worth merging, you can just say:
$ git checkout master
$ git branch -D @{-1}
to get rid of it without having to type the name of the topic you now hate
so much for wasting a lot of your time.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The branch color constants have the form COLOR_BRANCH_$category. Rename
them to BRANCH_COLOR_$category as this conveys their meaning better.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the literal ANSI escape sequences and replace them by readable
constants.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move has_commit() from branch to a common location, in preparation for
using it in "git-tag". Rename it to is_descendant_of() to make it more
unique and descriptive.
Signed-off-by: Jake Goulding <goulding@vivisimo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Moving opt_parse_with_commit() from branch to a common location, in
preparation for using it in tag. Rename it to match naming convention
of other option parsing functions.
Signed-off-by: Jake Goulding <goulding@vivisimo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it easier to recover from a mistaken branch deletion by displaying the
sha1 of the branch's tip commit.
Update t3200 test to match the change in output.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case the length of branch name is greather then PATH_MAX-11, we write
to unallocated memory otherwise.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just about using the API, though in case of ~ 10^100 commits,
this would fix the problem of writing to unallocated memory as well. ;-)
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case the length of branch name is greather then PATH_MAX-7, we write
to unallocated memory otherwise.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mv/maint-branch-m-symref:
update-ref --no-deref -d: handle the case when the pointed ref is packed
git branch -m: forbid renaming of a symref
Fix git update-ref --no-deref -d.
rename_ref(): handle the case when the reflog of a ref does not exist
Fix git branch -m for symrefs.
This had two problems with symrefs. First, it copied the actual sha1
instead of the "pointer", second it failed to remove the old ref after a
successful rename.
Given that till now delete_ref() always dereferenced symrefs, a new
parameters has been introduced to delete_ref() to allow deleting refs
without a dereference.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
After the optimization to --[no-]merged logic, the calculation of the
width of the longest refname to be shown might become inaccurate (since
the matching against merge_filter is performed after adding refs to
ref_list). This patch forces a recalculation of maxwidth when it might
be needed.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic for checking commits against merge_filter will be reused
when we recalculate the maxwidth of refnames.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous optimization to --[no-]merged ended up with some duplicated
code which this patch removes.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --no-merged $commit" used to compute the merge base between
the tip of each and every branch with the named $commit, but this was
wasteful when you have many branches. Inside append_ref() we literally
ran has_commit() between the tip of the branch and the merge_filter_ref.
Instead, we can let the revision machinery traverse the history as if we
are running:
$ git rev-list --branches --not $commit
by queueing the tips of branches we encounter as positive refs (this
mimicks the "--branches" option in the above command line) and then
appending the merge_filter_ref commit as a negative one, and finally
calling prepare_revision_walk() to limit the list..
After the traversal is done, branch tips that are reachable from $commit
are painted UNINTERESTING; they are already fully contained in $commit
(i.e. --merged). Tips that are not painted UNINTERESTING still have
commits that are not reachable from $commit, thus "--no-merged" will show
them.
With an artificial repository that has "master" and 1000 test-$i branches
where they were created by "git branch test-$i master~$i":
(with patch)
$ /usr/bin/time git-branch --no-merged master >/dev/null
0.12user 0.02system 0:00.15elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+1588minor)pagefaults 0swaps
$ /usr/bin/time git-branch --no-merged test-200 >/dev/null
0.15user 0.03system 0:00.18elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+1711minor)pagefaults 0swaps
(without patch)
$ /usr/bin/time git-branch --no-merged master >/dev/null
0.69user 0.03system 0:00.72elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+2229minor)pagefaults 0swaps
$ /usr/bin/time git-branch --no-merged test-200 >/dev/null
0.58user 0.03system 0:00.61elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+2248minor)pagefaults 0swaps
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We let for_each_ref() to feed all refs to append_ref() but we are only
ever interested in local or remote tracking branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/dashless:
Make usage strings dash-less
t/: Use "test_must_fail git" instead of "! git"
t/test-lib.sh: exit with small negagive int is ok with test_must_fail
Conflicts:
builtin-blame.c
builtin-mailinfo.c
builtin-mailsplit.c
builtin-shortlog.c
git-am.sh
t/t4150-am.sh
t/t4200-rerere.sh
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git-branch --merged" is a handy way to list all the branches that have
already been merged to the current branch, but it did not allow checking
against anything but the current branch. Having to switch branches only
to list the branches that are merged with another branch made the feature
practically useless.
This updates the option parser so that "git branch --merged next" is
accepted when you are on 'master' branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to require the name of the commit to limit the branches shown to
the --contains option, but more recent --merged/--no-meregd defaults to
HEAD (and they do not allow arbitrary commit, which is a separate issue).
This teaches --contains to default to HEAD when no parameter is given.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codepath to emit relationship between the branch and what it tracks
forgot to initialize a string buffer stat[] to empty when showing a
tracking branch. This moves the emptying so that the buffer starts as
empty and stays so when no information is added to fix this issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches "git branch -v" to insert the remote tracking statistics in
brackets, just before the one-liner commit log message for the branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These options filter the output from git branch to only include branches
whose tip is either merged or not merged into HEAD.
The use-case for these options is when working with integration of branches
from many remotes: `git branch --no-merged -a` will show a nice list of merge
candidates while `git branch --merged -a` will show the progress of your
integration work.
Also, a plain `git branch --merged` is a quick way to find local branches
which you might want to delete.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/checkout: (21 commits)
checkout: error out when index is unmerged even with -m
checkout: show progress when checkout takes long time while switching branches
Add merge-subtree back
checkout: updates to tracking report
builtin-checkout.c: Remove unused prefix arguments in switch_branches path
checkout: work from a subdirectory
checkout: tone down the "forked status" diagnostic messages
Clean up reporting differences on branch switch
builtin-checkout.c: fix possible usage segfault
checkout: notice when the switched branch is behind or forked
Build in checkout
Move code to clean up after a branch change to branch.c
Library function to check for unmerged index entries
Use diff -u instead of diff in t7201
Move create_branch into a library file
Build-in merge-recursive
Add "skip_unmerged" option to unpack_trees.
Discard "deleted" cache entries after using them to update the working tree
Send unpack-trees debugging output to stderr
Add flag to make unpack_trees() not print errors.
...
Conflicts:
Makefile
This change removes all obvious useless if-before-free tests.
E.g., it replaces code like this:
if (some_expression)
free (some_expression);
with the now-equivalent:
free (some_expression);
It is equivalent not just because POSIX has required free(NULL)
to work for a long time, but simply because it has worked for
so long that no reasonable porting target fails the test.
Here's some evidence from nearly 1.5 years ago:
http://www.winehq.org/pipermail/wine-patches/2006-October/031544.html
FYI, the change below was prepared by running the following:
git ls-files -z | xargs -0 \
perl -0x3b -pi -e \
's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*NULL)?\s*\)\s+(free\s*\(\s*\1\s*\))/$2/s'
Note however, that it doesn't handle brace-enclosed blocks like
"if (x) { free (x); }". But that's ok, since there were none like
that in git sources.
Beware: if you do use the above snippet, note that it can
produce syntactically invalid C code. That happens when the
affected "if"-statement has a matching "else".
E.g., it would transform this
if (x)
free (x);
else
foo ();
into this:
free (x);
else
foo ();
There were none of those here, either.
If you're interested in automating detection of the useless
tests, you might like the useless-if-before-free script in gnulib:
[it *does* detect brace-enclosed free statements, and has a --name=S
option to make it detect free-like functions with different names]
http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=build-aux/useless-if-before-free
Addendum:
Remove one more (in imap-send.c), spotted by Jean-Luc Herren <jlh@gmx.ch>.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch" and "git checkout -b" now honor --track option even when
the upstream branch is local. Previously --track was silently ignored
when forking from a local branch. Also the command did not error out
when --track was explicitly asked for but the forked point specified
was not an existing branch (i.e. when there is no way to set up the
tracking configuration), but now it correctly does.
The configuration setting branch.autosetupmerge can now be set to
"always", which is equivalent to using --track from the command line.
Setting branch.autosetupmerge to "true" will retain the former behavior
of only setting up branch.*.merge for remote upstream branches.
Includes test cases for the new functionality.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can also create branches, in exactly the same way, with checkout -b.
This introduces branch.{c,h} library files for doing porcelain-level
operations on branches (such as creating them with their appropriate
default configuration).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
This adds an option to help scripts find out color settings from
the configuration file.
git config --get-colorbool color.diff
inspects color.diff variable, and exits with status 0 (i.e. success) if
color is to be used. It exits with status 1 otherwise.
If a script wants "true"/"false" answer to the standard output of the
command, it can pass an additional boolean parameter to its command
line, telling if its standard output is a terminal, like this:
git config --get-colorbool color.diff true
When called like this, the command outputs "true" to its standard output
if color is to be used (i.e. "color.diff" says "always", "auto", or
"true"), and "false" otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches git-branch to limit its listing to branches that
are descendants to the named commit.
When you are using many topic branches, you often would want to
see which branch already includes a commit, so that you know
which can and cannot be rewound without disrupting other people.
One thing that sometimes happens to me is:
* Somebody sends a patch that is a good maint material. I
apply it to 'maint':
$ git checkout maint
$ git am -3 -s obvious-fix.patch
* Then somebody else sends another patch that is possibly a
good maint material, but I'd want to cook it in 'next' to be
extra sure. I fork a topic from 'maint' and apply the patch:
$ git checkout -b xx/maint-fix-foo
$ git am -3 -s ,xx-maint-fix-foo.patch
* A minor typo is found in the "obvious-fix.patch".
The above happens without pushing the results out, so I can
freely recover from it by amending 'maint', as long as I do not
forget to rebase the topics that were forked previously.
With this patch, I can do this to find out which topic
branches already contain the faulty commit:
$ git branch --contains=maint^
xx/maint-fix-foo
so I can rebase the xx/maint-fix-foo branch before merging it
to 'next'.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
