When git is passed the --paginate option, starting up a pager requires
deciding what pager to start, which requires access to the core.pager
configuration.
At the relevant moment, the repository has not been searched for yet.
Attempting to access the configuration at this point results in
git_dir being set to .git [*], which is almost certainly not what was
wanted. In particular, when run from a subdirectory of the toplevel,
git --paginate does not respect the core.pager setting from the
current repository.
[*] unless GIT_DIR or GIT_CONFIG is set
So delay the pager startup when possible:
1. run_argv() already commits pager choice inside run_builtin() if a
command is found. For commands that use RUN_SETUP, waiting until
then fixes the problem described above: once git knows where to
look, it happily respects the core.pager setting.
2. list_common_cmds_help() prints out 29 lines and exits. This can
benefit from pagination, so we need to commit the pager choice
before writing this output.
Luckily ‘git’ without subcommand has no other reason to access a
repository, so it would be intuitive to ignore repository-local
configuration in this case. Simpler for now to choose a pager
using the funny code that notices a repository that happens to be
at .git. That this accesses a repository when it is very
convenient to is a bug but not an important one.
3. help_unknown_cmd() prints out a few lines to stderr. It is not
important to paginate this, so don’t.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git is passed the --paginate option, starting up a pager requires
deciding what pager to start, which requires access to the core.pager
configuration. If --paginate is handled before searching for the
git dir, this configuration will be missed.
In other words, with --paginate and only with --paginate, any
repository-local core.pager setting is being ignored [*].
[*] unless the git directory is ./.git or GIT_DIR or GIT_CONFIG was
set explicitly.
Add a test to demonstrate this counterintuitive behavior. Noticed
while reading over a patch by Duy that fixes it.
Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Improved-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test choice of pager at several stages of repository setup. This
provides some (admittedly uninteresting) examples to keep in mind when
considering changes to the setup procedure.
Improved-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current tests test pager configuration for ‘git log’, but other
commands use a different setup procedure and should therefore be
tested separately. Add a helper to make this easier.
This patch introduces the helper and changes some existing tests to
use it. The only functional change should be the introduction of ‘git
log - ’ to a few test descriptions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gcc version 3.4.4 thinks that the 'cmp' variable could be used
while uninitialised and complains thus:
notes.c: In function `write_each_non_note_until':
notes.c:719: warning: 'cmp' might be used uninitialized in \
this function
Note that gcc versions 4.1.2 and 4.4.0 do not issue this warning.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we may segfault with too few parameters.
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Bert Wesarg <Bert.Wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Intel machines, the msvc compiler defines the CPU architecture
macros _M_IX86 and _M_X64 (equivalent to __i386__ and __x86_64__
respectively). Use these macros in the pre-processor expression
to select the "fast" definition of the {get,put}_be32() macros.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The empty treeish in ":path" means "index". This is actually a special
case of the ":stage:path" syntax where it is documented, but mentioning
it also together with "treeish:path" is helpful, so do it.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cp/textconv-cat-file:
git-cat-file.txt: Document --textconv
t/t8007: test textconv support for cat-file
textconv: support for cat_file
sha1_name: add get_sha1_with_context()
$Test::Builder::Test was only made into an `our' variable in 0.94
released in September 2009, older distros are more likely to have 0.92
or earlier. Use the singleton Test::More->builder constructor instead.
The exit() call was also unportable to <0.94. Just output a meaningful
exit code if the ->is_passing method exists. The t9700-perl-git.sh
test only cares about stderr output, so this doesn't affect test
results when using older Test::More modules.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An evil merge to adjust the series to cleaned-up API.
From: Julian Phillips <julian@quantumfyre.co.uk>
Subject: [PATCH v2 7/7] grep: fix string_list_append calls
Date: Sat, 26 Jun 2010 00:41:39 +0100
Message-ID: <20100625234140.18927.35025.julian@quantumfyre.co.uk>
* jp/string-list-api-cleanup:
string_list: Fix argument order for string_list_append
string_list: Fix argument order for string_list_lookup
string_list: Fix argument order for string_list_insert_at_index
string_list: Fix argument order for string_list_insert
string_list: Fix argument order for for_each_string_list
string_list: Fix argument order for print_string_list
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of string_list_append to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of string_list_lookup to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of string_list_insert_at_index to
use the string_list as the first argument. This helps make the
string_list API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of string_list_insert to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of for_each_string_list to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of print_string_list to use the
string_list as the first argument. This helps make the API easier to
use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
msvc: Fix some compiler warnings
Documentation: grep: fix asciidoc problem with --
msvc: Fix some "expr evaluates to function" compiler warnings
In some use cases it is not desirable that "git status" considers
submodules that only contain untracked content as dirty. This may happen
e.g. when the submodule is not under the developers control and not all
build generated files have been added to .gitignore by the upstream
developers. Using the "untracked" parameter for the "--ignore-submodules"
option disables checking for untracked content and lets git diff report
them as changed only when they have new commits or modified content.
Sometimes it is not wanted to have submodules show up as changed when they
just contain changes to their work tree (this was the behavior before
1.7.0). An example for that are scripts which just want to check for
submodule commits while ignoring any changes to the work tree. Also users
having large submodules known not to change might want to use this option,
as the - sometimes substantial - time it takes to scan the submodule work
tree(s) is saved when using the "dirty" parameter.
And if you want to ignore any changes to submodules, you can now do that
by using this option without parameters or with "all" (when the config
option status.submodulesummary is set, using "all" will also suppress the
output of the submodule summary).
A new function handle_ignore_submodules_arg() is introduced to parse this
option new to "git status" in a single location, as "git diff" already
knew it.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The summary and status commands only care about submodule commits, so it is
rather pointless that they check for dirty work trees. This saves the time
needed to scan the submodules work tree. Even "git status" profits from these
savings when the status.submodulesummary config option is set, as this lead to
traversing the submodule work trees twice, once for status and once again for
the submodule summary. And if the submodule was just dirty, submodule summary
produced rather meaningless output anyway:
* sub 1234567...1234567 (0):
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, using the normal (or production) compiler
warning level (-W3), msvc complains as follows:
.../sha1.c(244) : warning C4018: '<' : signed/unsigned mismatch
.../sha1.c(270) : warning C4244: 'function' : conversion from \
'unsigned __int64' to 'unsigned long', possible loss of data
.../sha1.c(271) : warning C4244: 'function' : conversion from \
'unsigned __int64' to 'unsigned long', possible loss of data
Note that gcc issues a similar complaint about line 244 when
compiling with -Wextra.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests used a mixture of 'echo -n' (which is non-portable) and either
test_cmp or diff to check if a file is empty. The much easier and portable
method to check for an empty file is '! test -s'
While we're in t4027, there was an excess test_done. Remove it.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Internally, --track and --orphan still use the 'safe' -b, not -B.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shift the 'new' from the param to the hint, and expand the hint.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lines that begin with "ok" confuse the TAP harness because it can't
distinguish them from a test counter. Work around the issue by saying
"pass" instead, which isn't a reserved TAP word.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SKIP messages are now part of the TAP plan. A TAP harness now knows
why a particular test was skipped and can report that information. The
non-TAP harness built into Git's test-lib did nothing special with
these messages, and is unaffected by these changes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in the testsuite will emit a line that doesn't end with a
newline, right before we're about to output "ok" or "not ok". This
breaks the TAP output with "Tests out of sequence" errors since a TAP
harness can't understand this:
ok 1 - A test
[some output here]ok 2 - Another test
ok 3 - Yet another test
Work around it by emitting an empty line before we're about to say
"ok" or "not ok", but only if we're running under --verbose and
HARNESS_ACTIVE=1 is set, which'll only be the case when running under
a harnesses like prove(1).
I think it's better to do this than fix each tests by adding `&& echo'
everywhere. More tests might be added that break TAP in the future,
and a human isn't going to look at the extra whitespace, since
HARNESS_ACTIVE=1 always means a harness is reading it.
The tests that had issues were:
t1007, t3410, t3413, t3409, t3414, t3415, t3416, t3412, t3404,
t5407, t7402, t7003, t9001
With this workaround the entire test suite runs without errors under:
prove -j 10 ./t[0-9]*.sh :: --verbose
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before TAP we just ran the Perl test and assumed that it failed if
nothing was printed on STDERR. Continue doing that, but introduce a
`test_external_has_tap' variable which tests can set to indicate that
they're outputting TAP.
If it's set we won't output a test plan, but trust the external test
to do so. That way we can make external tests work with a TAP harness,
but still maintain compatibility with test-lib's own way of tracking
tests through the test-results directory.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
TAP, the Test Anything Protocol, is a simple text-based interface
between testing modules in a test harness. test-lib.sh's output was
already very close to being valid TAP. This change brings it all the
way there. Before:
$ ./t0005-signals.sh
* ok 1: sigchain works
* passed all 1 test(s)
And after:
$ ./t0005-signals.sh
ok 1 - sigchain works
# passed all 1 test(s)
1..1
The advantage of using TAP is that any program that reads the format
(a "test harness") can run the tests. The most popular of these is the
prove(1) utility that comes with Perl. It can run tests in parallel,
display colored output, format the output to console, file, HTML etc.,
and much more. An example:
$ prove ./t0005-signals.sh
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.01 cusr 0.02 csys = 0.06 CPU)
Result: PASS
prove(1) gives you human readable output without being too
verbose. Running the test suite in parallel with `make test -j15`
produces a flood of text. Running them with `prove -j 15 ./t[0-9]*.sh`
makes it easy to follow what's going on.
All this patch does is re-arrange the output a bit so that it conforms
with the TAP spec, everything that the test suite did before continues
to work. That includes aggregating results in t/test-results/, the
--verbose, --debug and other options for tests, and the test color
output.
TAP harnesses ignore everything that they don't know about, so running
the tests with --verbose works:
$ prove ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh .. Terminated
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.01 cusr 0.01 csys = 0.05 CPU)
Result: PASS
Just supply the -v option to prove itself to get all the verbose
output that it suppresses:
$ prove -v ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh ..
Initialized empty Git repository in /home/avar/g/git/t/trash directory.t0005-signals/.git/
expecting success:
test-sigchain >actual
case "$?" in
143) true ;; # POSIX w/ SIGTERM=15
3) true ;; # Windows
*) false ;;
esac &&
test_cmp expect actual
Terminated
ok 1 - sigchain works
# passed all 1 test(s)
1..1
ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.01 cusr 0.01 csys = 0.04 CPU)
Result: PASS
As a further example, consider this test script that uses a lot of
test-lib.sh features by Jakub Narebski:
#!/bin/sh
test_description='this is a sample test.
This test is here to see various test outputs.'
. ./test-lib.sh
say 'diagnostic message'
test_expect_success 'true test' 'true'
test_expect_success 'false test' 'false'
test_expect_failure 'true test (todo)' 'true'
test_expect_failure 'false test (todo)' 'false'
test_debug 'echo "debug message"'
test_done
The output of that was previously:
* diagnostic message # yellow
* ok 1: true test
* FAIL 2: false test # bold red
false
* FIXED 3: true test (todo)
* still broken 4: false test (todo) # bold green
* fixed 1 known breakage(s) # green
* still have 1 known breakage(s) # bold red
* failed 1 among remaining 3 test(s) # bold red
But is now:
diagnostic message # yellow
ok 1 - true test
not ok - 2 false test # bold red
# false
ok 3 - true test (todo) # TODO known breakage
not ok 4 - false test (todo) # TODO known breakage # bold green
# fixed 1 known breakage(s) # green
# still have 1 known breakage(s) # bold red
# failed 1 among remaining 3 test(s) # bold red
1..4
All the coloring is preserved when the test is run manually. Under
prove(1) the test performs as expected, even with --debug and
--verbose options:
$ prove ./example.sh :: --debug --verbose
./example.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/4 subtests
(1 TODO test unexpectedly succeeded)
Test Summary Report
-------------------
./example.sh (Wstat: 256 Tests: 4 Failed: 1)
Failed test: 2
TODO passed: 3
Non-zero exit status: 1
Files=1, Tests=4, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.00 cusr 0.01 csys = 0.03 CPU)
Result: FAIL
The TAP harness itself doesn't get confused by the color output, they
aren't used by test-lib.sh stdout isn't open to a terminal (test -t 1).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc interprets two dashes separated by spaces as a single big
dash. So let's escape the first dash, so that "\--" will properly
appear as "--".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be useful to do something like:
git rev-list --reverse master -- README | git cherry-pick -n --stdin
without using xargs.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a notification in the command prompt specifying whether (and optionally how
far) your branch has diverged from its upstream. This is especially helpful in
small teams that very frequently (forget to) push to each other.
Support git-svn upstream detection as a special case, as migrators from
centralised version control systems are especially likely to forget to push.
Support for other types of upstream than SVN should be easy to add if anyone is
so inclined.
Signed-off-by: Andrew Sayers <andrew-git@pileofstuff.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, the following warning is issued while compiling
notes.c:
notes.c(927) : warning C4550: expression evaluates to a \
function which is missing an argument list
along with identical warnings on lines 928, 1016 and 1017.
In order to suppress the warning, we change the definition of
combine_notes_fn, so that the symbol type is an (explicit)
"pointer to function ...". As a result, several other
declarations need some minor fix-up to take account of the
new typedef.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the protocol git+ssh:// for example we do not want to
decode the '+' as a space. The url decoding must take place only
for the server name and parameters.
This fixes a regression introduced in 9d2e942.
Initial-fix-by: Pascal Obry <pascal.obry@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
