Two help messages given when "git add" notices the user gave it
nothing to add have been updated to use advise() API.
* hw/advice-add-nothing:
add: change advice config variables used by the add API
add: use advise function to display hints
Clarify documentation on committer/author identities.
* bc/author-committer-doc:
doc: provide guidance on user.name format
docs: expand on possible and recommended user config options
doc: move author and committer information to git-commit(1)
When 46af44b07d (pull --rebase=<type>: allow single-letter abbreviations
for the type, 2018-08-04) landed in Git, it had the side effect that
not only 'pull --rebase=<type>' accepted the single-letter abbreviations
but also the 'pull.rebase' and 'branch.<name>.rebase' configurations.
However, 'git remote rename' did not honor these single-letter
abbreviations when reading the 'branch.*.rebase' configurations.
We now document the single-letter abbreviations and both code places
share a common function to parse the values of 'git pull --rebase=*',
'pull.rebase', and 'branches.*.rebase'.
The only functional change is the handling of the `branch_info::rebase`
value. Before it was an unsigned enum, thus the truth value could be
checked with `branch_info::rebase != 0`. But `enum rebase_type` is
signed, thus the truth value must now be checked with
`branch_info::rebase >= REBASE_TRUE`
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
advice.addNothing config variable is used to control the visibility of
two advice messages in the add library. This config variable is
replaced by two new variables, whose names are more clear and relevant
to the two cases.
Also add the two new variables to the documentation.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify documentation on committer/author identities.
* bc/author-committer-doc:
doc: provide guidance on user.name format
docs: expand on possible and recommended user config options
doc: move author and committer information to git-commit(1)
gpg.minTrustLevel configuration variable has been introduced to
tell various signature verification codepaths the required minimum
trust level.
* hi/gpg-mintrustlevel:
gpg-interface: add minTrustLevel as a configuration option
The documentation for push.default mentions that it is used if no
refspec is "explicitly given". Let's drop the notion of "explicit" here,
since it's vague, and just mention that any refspec from anywhere is
sufficient to override this.
I've dropped the mention of "explicitly given" from the definition of
the "nothing" value right below, too. It's close enough to our
clarification that it should be obvious we mean the same type of "given"
here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new config value for core.fsmonitorHookVersion was added to be able
to force the version of the fsmonitor hook. Possible values are 1 or 2.
When this is not set the code will use a value of -1 and attempt to use
version 2 of the hook first and if that fails will attempt version 1.
Signed-off-by: Kevin Willford <Kevin.Willford@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's make it possible to configure if we want pack reuse or not.
The main reason it might not be wanted is probably debugging and
performance testing, though pack reuse _might_ cause larger packs,
because we wouldn't consider the reused objects as bases for
finding new deltas.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users in a wide variety of situations find themselves with HTTP push
problems. Oftentimes these issues are due to antivirus software,
filtering proxies, or other man-in-the-middle situations; other times,
they are due to simple unreliability of the network.
However, a common solution to HTTP push problems found online is to
increase http.postBuffer. This works for none of the aforementioned
situations and is only useful in a small, highly restricted number of
cases: essentially, when the connection does not properly support
HTTP/1.1.
Document when raising this value is appropriate and what it actually
does, and discourage people from using it as a general solution for push
problems, since it is not effective there.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a frequent misconception that the user.name variable controls
authentication in some way, and as a result, beginning users frequently
attempt to change it when they're having authentication troubles.
Document that the convention is that this variable represents some form
of a human's personal name, although that is not required. In addition,
address concerns about whether Unicode is supported.
Use the term "personal name" as this is likely to draw the intended
contrast, be applicable across cultures which may have different naming
conventions, and be easily understandable to people who do not speak
English as their first language. Indicate that "some form" is
conventionally used, as people may use a nickname or preferred name
instead of a full legal name.
Point users who may be confused about authentication to an appropriate
configuration option instead. Provide a shortened form of this
information in the configuration option description.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at one time it made perfect sense to store information about
configuring author and committer information in the documentation for
git commit-tree, in modern Git that operation is seldom used. Most
users will use git commit and expect to find comprehensive documentation
about its use in the manual page for that command.
Considering that there is significant confusion about how one is to use
the user.name and user.email variables, let's put as much documentation
as possible into an obvious place where users will be more likely to
find it.
In addition, expand the environment variables section to describe their
use more fully. Even though we now describe all of the options there
and in the configuration settings documentation, preserve the existing
text in git-commit.txt so that people can easily reason about the
ordering of the various options they can use. Explain the use of the
author.* and committer.* options as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many languages, the adverb with the root "actual" means "at the
present time." However, this usage is considered dated or even archaic
in English, and for referring to events occurring at the present time,
we usually prefer "currently" or "presently". "Actually" is commonly
used in modern English only for the meaning of "in fact" or to express a
contrast with what is expected.
Since the documentation refers to the available options at the present
time (that is, at the time of writing) instead of drawing a contrast,
let's switch to "currently," which both is commonly used and sounds less
formal than "presently."
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, signature verification for merge and pull operations checked
if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in
verify_merge_signature(). If that was the case, the process die()d.
The other code paths that did signature verification relied entirely on
the return code from check_commit_signature(). And signatures made with
a good key, irregardless of its trust level, was considered valid by
check_commit_signature().
This difference in behavior might induce users to erroneously assume
that the trust level of a key in their keyring is always considered by
Git, even for operations where it is not (e.g. during a verify-commit or
verify-tag).
The way it worked was by gpg-interface.c storing the result from the
key/signature status *and* the lowest-two trust levels in the `result`
member of the signature_check structure (the last of these status lines
that were encountered got written to `result`). These are documented in
GPG under the subsection `General status codes` and `Key related`,
respectively [1].
The GPG documentation says the following on the TRUST_ status codes [1]:
"""
These are several similar status codes:
- TRUST_UNDEFINED <error_token>
- TRUST_NEVER <error_token>
- TRUST_MARGINAL [0 [<validation_model>]]
- TRUST_FULLY [0 [<validation_model>]]
- TRUST_ULTIMATE [0 [<validation_model>]]
For good signatures one of these status lines are emitted to
indicate the validity of the key used to create the signature.
The error token values are currently only emitted by gpgsm.
"""
My interpretation is that the trust level is conceptionally different
from the validity of the key and/or signature. That seems to also have
been the assumption of the old code in check_signature() where a result
of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED)
were both considered a success.
The two cases where a result of 'U' had special meaning were in
verify_merge_signature() (where this caused git to die()) and in
format_commit_one() (where it affected the output of the %G? format
specifier).
I think it makes sense to refactor the processing of TRUST_ status lines
such that users can configure a minimum trust level that is enforced
globally, rather than have individual parts of git (e.g. merge) do it
themselves (except for a grace period with backward compatibility).
I also think it makes sense to not store the trust level in the same
struct member as the key/signature status. While the presence of a
TRUST_ status code does imply that the signature is good (see the first
paragraph in the included snippet above), as far as I can tell, the
order of the status lines from GPG isn't well-defined; thus it would
seem plausible that the trust level could be overwritten with the
key/signature status if they were stored in the same member of the
signature_check structure.
This patch introduces a new configuration option: gpg.minTrustLevel. It
consolidates trust-level verification to gpg-interface.c and adds a new
`trust_level` member to the signature_check structure.
Backward-compatibility is maintained by introducing a special case in
verify_merge_signature() such that if no user-configurable
gpg.minTrustLevel is set, then the old behavior of rejecting
TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand,
gpg.minTrustLevel is set, then that value overrides the old behavior.
Similarly, the %G? format specifier will continue show 'U' for
signatures made with a key that has a trust level of TRUST_UNDEFINED or
TRUST_NEVER, even though the 'U' character no longer exist in the
`result` member of the signature_check structure. A new format
specifier, %GT, is also introduced for users that want to show all
possible trust levels for a signature.
Another approach would have been to simply drop the trust-level
requirement in verify_merge_signature(). This would also have made the
behavior consistent with other parts of git that perform signature
verification. However, requiring a minimum trust level for signing keys
does seem to have a real-world use-case. For example, the build system
used by the Qubes OS project currently parses the raw output from
verify-tag in order to assert a minimum trust level for keys used to
sign git tags [2].
[1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master
[2] 9674c1991d/scripts/verify-git-tag (L43)
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git users at $DAYJOB have been using protocol v2 as a default for
~1.5 years now and others have been also reporting good experiences
with it, so it seems like a good time to bump the default version. It
produces a significant performance improvement when fetching from
repositories with many refs, such as
https://chromium.googlesource.com/chromium/src.
This only affects the client, not the server. (The server already
defaults to supporting protocol v2.) The protocol change is backward
compatible, so this should produce no significant effect when
contacting servers that only speak protocol v0.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's protocol version 2 has been working well in production for over
a year. Simplify documentation by no longer referring to it as
experimental.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The whole submoduleAlternateErrorStrategyDie item is interpreted as
being part of the supporting content of the preceding item. This is
because we don't give a double-colon "::" for the separator, but just a
single colon, ":". Let's fix that.
There are a few other matches for [^:]:\s*$ in Documentation/config, but
I didn't spot any similar bugs among them.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Management of sparsely checked-out working tree has gained a
dedicated "sparse-checkout" command.
* ds/sparse-cone: (21 commits)
sparse-checkout: improve OS ls compatibility
sparse-checkout: respect core.ignoreCase in cone mode
sparse-checkout: check for dirty status
sparse-checkout: update working directory in-process for 'init'
sparse-checkout: cone mode should not interact with .gitignore
sparse-checkout: write using lockfile
sparse-checkout: use in-process update for disable subcommand
sparse-checkout: update working directory in-process
sparse-checkout: sanitize for nested folders
unpack-trees: add progress to clear_ce_flags()
unpack-trees: hash less in cone mode
sparse-checkout: init and set in cone mode
sparse-checkout: use hashmaps for cone patterns
sparse-checkout: add 'cone' mode
trace2: add region in clear_ce_flags
sparse-checkout: create 'disable' subcommand
sparse-checkout: add '--stdin' option to set subcommand
sparse-checkout: 'set' subcommand
clone: add --sparse mode
sparse-checkout: create 'init' subcommand
...
"git format-patch" can take a set of configured format.notes values
to specify which notes refs to use in the log message part of the
output. The behaviour of this was not consistent with multiple
--notes command line options, which has been corrected.
* dl/format-patch-notes-config-fixup:
notes.h: fix typos in comment
notes: break set_display_notes() into smaller functions
config/format.txt: clarify behavior of multiple format.notes
format-patch: move git_config() before repo_init_revisions()
format-patch: use --notes behavior for format.notes
notes: extract logic into set_display_notes()
notes: create init_display_notes() helper
notes: rename to load_display_notes()
In 8164c961e1 (format-patch: use --notes behavior for format.notes,
2019-12-09), we slightly tweaked the behavior of having multiple
`format.notes` configuration variables. We did not update the
documentation to reflect this, however.
Explictly state the behavior of having multiple `format.notes`
configuration variables so users are clear on what to expect.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interaction between "git clone --recurse-submodules" and
alternate object store was ill-designed. The documentation and
code have been taught to make more clear recommendations when the
users see failures.
* jt/clone-recursesub-ref-advise:
submodule--helper: advise on fatal alternate error
Doc: explain submodule.alternateErrorStrategy
Work around a issue where a FD that is left open when spawning a
child process and is kept open in the child can interfere with the
operation in the parent process on Windows.
* js/mingw-inherit-only-std-handles:
mingw: forbid translating ERROR_SUCCESS to an errno value
mingw: do set `errno` correctly when trying to restrict handle inheritance
mingw: restrict file handle inheritance only on Windows 7 and later
mingw: spawned processes need to inherit only standard handles
mingw: work around incorrect standard handles
mingw: demonstrate that all file handles are inherited by child processes
The beginning of rewriting "git add -i" in C.
* js/builtin-add-i:
built-in add -i: implement the `help` command
built-in add -i: use color in the main loop
built-in add -i: support `?` (prompt help)
built-in add -i: show unique prefixes of the commands
built-in add -i: implement the main loop
built-in add -i: color the header in the `status` command
built-in add -i: implement the `status` command
diff: export diffstat interface
Start to implement a built-in version of `git add --interactive`
When recursively cloning a superproject with some shallow modules
defined in its .gitmodules, then recloning with "--reference=<path>", an
error occurs. For example:
git clone --recurse-submodules --branch=master -j8 \
https://android.googlesource.com/platform/superproject \
master
git clone --recurse-submodules --branch=master -j8 \
https://android.googlesource.com/platform/superproject \
--reference master master2
fails with:
fatal: submodule '<snip>' cannot add alternate: reference repository
'<snip>' is shallow
When a alternate computed from the superproject's alternate cannot be
added, whether in this case or another, advise about configuring the
"submodule.alternateErrorStrategy" configuration option and using
"--reference-if-able" instead of "--reference" when cloning.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 31224cbdc7 ("clone: recursive and reference option triggers
submodule alternates", 2016-08-17) taught Git to support the
configuration options "submodule.alternateLocation" and
"submodule.alternateErrorStrategy" on a superproject.
If "submodule.alternateLocation" is configured to "superproject" on a
superproject, whenever a submodule of that superproject is cloned, it
instead computes the analogous alternate path for that submodule from
$GIT_DIR/objects/info/alternates of the superproject, and references it.
The "submodule.alternateErrorStrategy" option determines what happens
if that alternate cannot be referenced. However, it is not clear that
the clone proceeds as if no alternate was specified when that option is
not set to "die" (as can be seen in the tests in 31224cbdc7). Therefore,
document it accordingly.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Docfix.
* en/doc-typofix:
Fix spelling errors in no-longer-updated-from-upstream modules
multimail: fix a few simple spelling errors
sha1dc: fix trivial comment spelling error
Fix spelling errors in test commands
Fix spelling errors in messages shown to users
Fix spelling errors in names of tests
Fix spelling errors in comments of testcases
Fix spelling errors in code comments
Fix spelling errors in documentation outside of Documentation/
Documentation: fix a bunch of typos, both old and new
Turns out that it don't work so well on Vista, see
https://github.com/git-for-windows/git/issues/1742 for details.
According to https://devblogs.microsoft.com/oldnewthing/?p=8873, it
*should* work on Windows Vista and later.
But apparently there are issues on Windows Vista when pipes are
involved. Given that Windows Vista is past its end of life (official
support ended on April 11th, 2017), let's not spend *too* much time on
this issue and just disable the file handle inheritance restriction on
any Windows version earlier than Windows 7.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout feature can have quadratic performance as
the number of patterns and number of entries in the index grow.
If there are 1,000 patterns and 1,000,000 entries, this time can
be very significant.
Create a new Boolean config option, core.sparseCheckoutCone, to
indicate that we expect the sparse-checkout file to contain a
more limited set of patterns. This is a separate config setting
from core.sparseCheckout to avoid breaking older clients by
introducing a tri-state option.
The config option does nothing right now, but will be expanded
upon in a later commit.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike previous conversions to C, where we started with a built-in
helper, we start this conversion by adding an interception in the
`run_add_interactive()` function when the new opt-in
`add.interactive.useBuiltin` config knob is turned on (or the
corresponding environment variable `GIT_TEST_ADD_I_USE_BUILTIN`), and
calling the new internal API function `run_add_i()` that is implemented
directly in libgit.a.
At this point, the built-in version of `git add -i` only states that it
cannot do anything yet. In subsequent patches/patch series, the
`run_add_i()` function will gain more and more functionality, until it
is feature complete. The whole arc of the conversion can be found in the
PRs #170-175 at https://github.com/gitgitgadget/git.
The "--helper approach" can unfortunately not be used here: on Windows
we face the very specific problem that a `system()` call in
Perl seems to close `stdin` in the parent process when the spawned
process consumes even one character from `stdin`. Which prevents us from
implementing the main loop in C and still trying to hand off to the Perl
script.
The very real downside of the approach we have to take here is that the
test suite won't pass with `GIT_TEST_ADD_I_USE_BUILTIN=true` until the
conversion is complete (the `--helper` approach would have let it pass,
even at each of the incremental conversion steps).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The branch description ("git branch --edit-description") has been
used to fill the body of the cover letters by the format-patch
command; this has been enhanced so that the subject can also be
filled.
* dl/format-patch-cover-from-desc:
format-patch: teach --cover-from-description option
format-patch: use enum variables
format-patch: replace erroneous and condition
"git format-patch -o <outdir>" did an equivalent of "mkdir <outdir>"
not "mkdir -p <outdir>", which is being corrected.
* bw/format-patch-o-create-leading-dirs:
format-patch: create leading components of output directory
Before, when format-patch generated a cover letter, only the body would
be populated with a branch's description while the subject would be
populated with placeholder text. However, users may want to have the
subject of their cover letter automatically populated in the same way.
Teach format-patch to accept the `--cover-from-description` option and
corresponding `format.coverFromDescription` config, allowing users to
populate different parts of the cover letter (including the subject
now).
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The trace2 output, when sending them to files in a designated
directory, can populate the directory with too many files; a
mechanism is introduced to set the maximum number of files and
discard further logs when the maximum is reached.
* js/trace2-cap-max-output-files:
trace2: write discard message to sentinel files
trace2: discard new traces if target directory has too many files
docs: clarify trace2 version invariants
docs: mention trace2 target-dir mode in git-config
"git fetch --jobs=<n>" allowed <n> parallel jobs when fetching
submodules, but this did not apply to "git fetch --multiple" that
fetches from multiple remote repositories. It now does.
* js/fetch-jobs:
fetch: let --jobs=<n> parallelize --multiple, too
'git format-patch -o <outdir>' did an equivalent of 'mkdir <outdir>'
not 'mkdir -p <outdir>', which is being corrected.
Avoid the usage of 'adjust_shared_perm' on the leading directories which
may have security implications. Achieved by temporarily disabling of
'config.sharedRepository' like 'git init' does.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far, `--jobs=<n>` only parallelizes submodule fetches/clones, not
`--multiple` fetches, which is unintuitive, given that the option's name
does not say anything about submodules in particular.
Let's change that. With this patch, also fetches from multiple remotes
are parallelized.
For backwards-compatibility (and to prepare for a use case where
submodule and multiple-remote fetches may need different parallelization
limits), the config setting `submodule.fetchJobs` still only controls
the submodule part of `git fetch`, while the newly-introduced setting
`fetch.parallel` controls both (but can be overridden for submodules
with `submodule.fetchJobs`).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
trace2 can write files into a target directory. With heavy usage, this
directory can fill up with files, causing difficulty for
trace-processing systems.
This patch adds a config option (trace2.maxFiles) to set a maximum
number of files that trace2 will write to a target directory. The
following behavior is enabled when the maxFiles is set to a positive
integer:
When trace2 would write a file to a target directory, first check
whether or not the traces should be discarded. Traces should be
discarded if:
* there is a sentinel file declaring that there are too many files
* OR, the number of files exceeds trace2.maxFiles.
In the latter case, we create a sentinel file named git-trace2-discard
to speed up future checks.
The assumption is that a separate trace-processing system is dealing
with the generated traces; once it processes and removes the sentinel
file, it should be safe to generate new trace files again.
The default value for trace2.maxFiles is zero, which disables the file
count check.
The config can also be overridden with a new environment variable:
GIT_TRACE2_MAX_FILES.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A configuration variable tells "git fetch" to write the commit
graph after finishing.
* ds/commit-graph-on-fetch:
fetch: add fetch.writeCommitGraph config setting
The documentation and tests for "git format-patch" have been
cleaned up.
* dl/format-patch-doc-test-cleanup:
config/format.txt: specify default value of format.coverLetter
Doc: add more detail for git-format-patch
t4014: stop losing return codes of git commands
t4014: remove confusing pipe in check_threading()
t4014: use test_line_count() where possible
t4014: let sed open its own files
t4014: drop redirections to /dev/null
t4014: use indentable here-docs
t4014: remove spaces after redirect operators
t4014: use sq for test case names
t4014: move closing sq onto its own line
t4014: s/expected/expect/
t4014: drop unnecessary blank lines from test cases
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.
* cc/multi-promisor:
Move core_partial_clone_filter_default to promisor-remote.c
Move repository_format_partial_clone to promisor-remote.c
Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
remote: add promisor and partial clone config to the doc
partial-clone: add multiple remotes in the doc
t0410: test fetching from many promisor remotes
builtin/fetch: remove unique promisor remote limitation
promisor-remote: parse remote.*.partialclonefilter
Use promisor_remote_get_direct() and has_promisor_remote()
promisor-remote: use repository_format_partial_clone
promisor-remote: add promisor_remote_reinit()
promisor-remote: implement promisor_remote_get_direct()
Add initial support for many promisor remotes
fetch-object: make functions return an error code
t0410: remove pipes after git commands
We promoted the "indent heuristics" that decides where to split
diff hunks from experimental to the default a few years ago, but
some stale documentation still marked it as experimental, which has
been corrected.
* sg/diff-indent-heuristic-non-experimental:
diff: 'diff.indentHeuristic' is no longer experimental
A mechanism to affect the default setting for a (related) group of
configuration variables is introduced.
* ds/feature-macros:
repo-settings: create feature.experimental setting
repo-settings: create feature.manyFiles setting
repo-settings: parse core.untrackedCache
commit-graph: turn on commit-graph by default
t6501: use 'git gc' in quiet mode
repo-settings: consolidate some config settings
The commit-graph feature is now on by default, and is being
written during 'git gc' by default. Typically, Git only writes
a commit-graph when a 'git gc --auto' command passes the gc.auto
setting to actualy do work. This means that a commit-graph will
typically fall behind the commits that are being used every day.
To stay updated with the latest commits, add a step to 'git
fetch' to write a commit-graph after fetching new objects. The
fetch.writeCommitGraph config setting enables writing a split
commit-graph, so on average the cost of writing this file is
very small. Occasionally, the commit-graph chain will collapse
to a single level, and this could be slow for very large repos.
For additional use, adjust the default to be true when
feature.experimental is enabled.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The indent heuristic started out as experimental, but it's now our
default diff heuristic since 33de716387 (diff: enable indent heuristic
by default, 2017-05-08). Alas, that commit didn't update the
documentation, and the description of the 'diff.indentHeuristic'
configuration variable still implies that it's experimental and not
the default.
Update the description of 'diff.indentHeuristic' to make it clear that
it's the default diff heuristic.
The description of the related '--indent-heuristic' option has already
been updated in bab76141da (diff: --indent-heuristic is no
longer experimental, 2017-10-29).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'feature.experimental' setting includes config options that are
not committed to become defaults, but could use additional testing.
Update the following config settings to take new defaults, and to
use the repo_settings struct if not already using them:
* 'pack.useSparse=true'
* 'fetch.negotiationAlgorithm=skipping'
In the case of fetch.negotiationAlgorithm, the existing logic
would load the config option only when about to use the setting,
so had a die() statement on an unknown string value. This is
removed as now the config is parsed under prepare_repo_settings().
In general, this die() is probably misplaced and not valuable.
A test was removed that checked this die() statement executed.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The feature.manyFiles setting is suitable for repos with many
files in the working directory. By setting index.version=4 and
core.untrackedCache=true, commands such as 'git status' should
improve.
While adding this setting, modify the index version precedence
tests to check how this setting overrides the default for
index.version is unset.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph feature has seen a lot of activity in the past
year or so since it was introduced. The feature is a critical
performance enhancement for medium- to large-sized repos, and
does not significantly hurt small repos.
Change the defaults for core.commitGraph and gc.writeCommitGraph
to true so users benefit from this feature by default.
There are several places in the test suite where the environment
variable GIT_TEST_COMMIT_GRAPH is disabled to avoid reading a
commit-graph, if it exists. The config option overrides the
environment, so swap these. Some GIT_TEST_COMMIT_GRAPH assignments
remain, and those are to avoid writing a commit-graph when a new
commit is created.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inspired by 21416f0a07 ("restore: fix typo in docs", 2019-08-03), I ran
"git grep -E '(\b[a-zA-Z]+) \1\b' -- Documentation/" to find other cases
where words were duplicated, e.g. "the the", and in most cases removed
one of the repeated words.
There were many false positives by this grep command, including
deliberate repeated words like "really really" or valid uses of "that
that" which I left alone, of course.
I also did not correct any of the legitimate, accidentally repeated
words in old RelNotes.
Signed-off-by: Mark Rushakoff <mark.rushakoff@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Can not" suggests one has the option to not do something, whereas
"cannot" more strongly suggests something is disallowed or impossible.
Noticed "can not", mistakenly used instead of "cannot" in git help
glossary, then ran git grep 'can not' and found many other instances.
Only files in the Documentation folder were modified.
'Can not' also occurs in some source code comments and some test
assertion messages, and there is an error message and translation "can
not move directory into itself" which I may fix and submit separately
from the documentation change.
Also noticed and fixed "is does" in git help fetch, but there are no
other occurrences of that typo according to git grep.
Signed-off-by: Mark Rushakoff <mark.rushakoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the docs, test the interaction between the new default,
configuration and command line option, in addition to actually
flipping the default.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git log" command learns to issue a warning when log.mailmap
configuration is not set and --[no-]mailmap option is not used, to
prepare users for future versions of Git that uses the mailmap by
default.
* ac/log-use-mailmap-by-default-transition:
tests: defang pager tests by explicitly disabling the log.mailmap warning
documentation: mention --no-use-mailmap and log.mailmap false setting
log: add warning for unspecified log.mailmap setting
"git cherry-pick/revert" learned a new "--skip" action.
* ra/cherry-pick-revert-skip:
cherry-pick/revert: advise using --skip
cherry-pick/revert: add --skip option
sequencer: use argv_array in reset_merge
sequencer: rename reset_for_rollback to reset_merge
sequencer: add advice for revert
"git blame" learned to "ignore" commits in the history, whose
effects (as well as their presence) get ignored.
* br/blame-ignore:
t8014: remove unnecessary braces
blame: drop some unused function parameters
blame: add a test to cover blame_coalesce()
blame: use the fingerprint heuristic to match ignored lines
blame: add a fingerprint heuristic to match ignored lines
blame: optionally track line fingerprints during fill_blame_origin()
blame: add config options for the output of ignored or unblamable lines
blame: add the ability to ignore commits and their changes
blame: use a helper function in blame_chunk()
Move oidset_parse_file() to oidset.c
fsck: rename and touch up init_skiplist()
The log.mailmap setting may be explicitly set to false, which disables
the mailmap feature implicity. In practice, doing so is equivalent to
always using the previously undocumented --no-use-mailmap option on the
command line.
Accordingly, we document both the existence of --no-use-mailmap as
well as briefly discuss the equivalence of it to log.mailmap=False.
Signed-off-by: Ariadne Conill <ariadne@dereferenced.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gpg --verify usage example within the 'gpg.program' variable
reference provides an incorrect example of the gpg --verify command
arguments.
The command argument order, when providing both a detached signature
and data, should be signature first and data second:
https://gnupg.org/documentation/manuals/gnupg/Operational-GPG-Commands.html
Signed-off-by: Robert Morgan <robert.thomas.morgan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" and "git pull" reports when a fetch results in
non-fast-forward updates to let the user notice unusual situation.
The commands learned "--no-shown-forced-updates" option to disable
this safety feature.
* ds/fetch-disable-force-notice:
pull: add --[no-]show-forced-updates passthrough
fetch: warn about forced updates in branch listing
fetch: add --[no-]show-forced-updates argument
"git status" can be told a non-standard default value for the
"--[no-]ahead-behind" option with a new configuration variable
status.aheadBehind.
* jh/status-aheadbehind:
status: ignore status.aheadbehind in porcelain formats
status: warn when a/b calculation takes too long
status: add status.aheadbehind setting
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
A new tag.gpgSign configuration variable turns "git tag -a" into
"git tag -s".
* tm/tag-gpgsign-config:
tag: add tag.gpgSign config option to force all tags be GPG-signed
In the case of merge conflicts, while performing a revert, we are
currently advised to use `git cherry-pick --<sequencer-options>`.
Introduce a separate advice message for `git revert`. Also change
the signature of `create_seq_dir` to handle which advice to display
selectively.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --[no-]show-forced-updates option in 'git fetch' can be confusing
for some users, especially if it is enabled via config setting and not
by argument. Add advice to warn the user that the (forced update)
messages were not listed.
Additionally, warn users when the forced update check takes longer
than ten seconds, and recommend that they disable the check. These
messages can be disabled by the advice.fetchShowForcedUpdates config
setting.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After updating a set of remove refs during a 'git fetch', we walk the
commits in the new ref value and not in the old ref value to discover
if the update was a forced update. This results in two things happening
during the command:
1. The line including the ref update has an additional "(forced-update)"
marker at the end.
2. The ref log for that remote branch includes a bit saying that update
is a forced update.
For many situations, this forced-update message happens infrequently, or
is a small bit of information among many ref updates. Many users ignore
these messages, but the calculation required here slows down their fetches
significantly. Keep in mind that they do not have the opportunity to
calculate a commit-graph file containing the newly-fetched commits, so
these comparisons can be very slow.
Add a '--[no-]show-forced-updates' option that allows a user to skip this
calculation. The only permanent result is dropping the forced-update bit
in the reflog.
Include a new fetch.showForcedUpdates config setting that allows this
behavior without including the argument in every command. The config
setting is overridden by the command-line arguments.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ahead/behind calculation in 'git status' can be slow in some
cases. Users may not realize that there are ways to avoid this
computation, especially if they are not using the information.
Add a warning that appears if this calculation takes more than
two seconds. The warning can be disabled through the new config
setting advice.statusAheadBehind.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --[no-]ahead-behind option was introduced in fd9b544a
(status: add --[no-]ahead-behind to status and commit for V2
format, 2018-01-09). This is a necessary change of behavior
in repos where the remote tracking branches can move very
quickly ahead of the local branches. However, users need to
remember to provide the command-line argument every time.
Add a new "status.aheadBehind" config setting to change the
default behavior of all git status formats.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learns a configuration to set the default for
its --notes=<ref> option.
* dl/format-patch-notes-config:
format-patch: teach format.notes config option
git-format-patch.txt: document --no-notes option
One can see that an alias that begins with a non-command first word,
such as `loud-rebase = -c commit.verbose=true rebase`, is permitted.
However, this isn't immediately obvious to users as alias instances
typically begin with a command.
Document the fact that an alias can begin with a non-command first word
so that users will be able to discover that this is a feature.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, the documentation would mix " and ' for code and config
snippets. Change these instances to ` so that they are marked up in
monospace.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As many CI/CD tools don't allow to control command line options when
executing `git tag` command, a default value in the configuration file
will allow to enforce tag signing if required.
The new config-file option tag.gpgSign is added to define default behavior
of tag signings. To override default behavior the command line option -s,
--sign and --no-sign can be used:
$ git tag -m "commit message"
will generate a GPG signed tag if tag.gpgSign option is true, while
$ git tag --no-sign -m "commit message"
will skip the signing step.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For an environment variable that is supposed to be set by users, the
GIT_TR2* env vars are just too unclear, inconsistent, and ugly.
Most of the established GIT_* environment variables don't use
abbreviations, and in case of the few that do (GIT_DIR,
GIT_COMMON_DIR, GIT_DIFF_OPTS) it's quite obvious what the
abbreviations (DIR and OPTS) stand for. But what does TR stand for?
Track, traditional, trailer, transaction, transfer, transformation,
transition, translation, transplant, transport, traversal, tree,
trigger, truncate, trust, or ...?!
The trace2 facility, as the '2' suffix in its name suggests, is
supposed to eventually supercede Git's original trace facility. It's
reasonable to expect that the corresponding environment variables
follow suit, and after the original GIT_TRACE variables they are
called GIT_TRACE2; there is no such thing is 'GIT_TR'.
All trace2-specific config variables are, very sensibly, in the
'trace2' section, not in 'tr2'.
OTOH, we don't gain anything at all by omitting the last three
characters of "trace" from the names of these environment variables.
So let's rename all GIT_TR2* environment variables to GIT_TRACE2*,
before they make their way into a stable release.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-format-patch, notes can be appended with the `--notes` option.
However, this must be specified by the user on an
invocation-by-invocation basis. If a user is not careful, it's possible
that they may forget to include it and generate a patch series without
notes.
Teach git-format-patch the `format.notes` config option. Its value is a
notes ref that will be automatically appended. The special value of
"standard" can be used to specify the standard notes. This option is
overridable with the `--no-notes` option in case a user wishes not to
append notes.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When ignoring commits, the commit that is blamed might not be
responsible for the change, due to the inaccuracy of our heuristic.
Users might want to know when a particular line has a potentially
inaccurate blame.
Furthermore, guess_line_blames() may fail to find any parent commit for
a given line touched by an ignored commit. Those 'unblamable' lines
remain blamed on an ignored commit. Users might want to know if a line
is unblamable so that they do not spend time investigating a commit they
know is uninteresting.
This patch adds two config options to mark these two types of lines in
the output of blame.
The first option can identify ignored lines by specifying
blame.markIgnoredLines. When this option is set, each blame line that
was blamed on a commit other than the ignored commit is marked with a
'?'.
For example:
278b6158d6fdb (Barret Rhoden 2016-04-11 13:57:54 -0400 26)
appears as:
?278b6158d6fd (Barret Rhoden 2016-04-11 13:57:54 -0400 26)
where the '?' is placed before the commit, and the hash has one fewer
characters.
Sometimes we are unable to even guess at what ancestor commit touched a
line. These lines are 'unblamable.' The second option,
blame.markUnblamableLines, will mark the line with '*'.
For example, say we ignore e5e8d36d04cbe, yet we are unable to blame
this line on another commit:
e5e8d36d04cbe (Barret Rhoden 2016-04-11 13:57:54 -0400 26)
appears as:
*e5e8d36d04cb (Barret Rhoden 2016-04-11 13:57:54 -0400 26)
When these config options are used together, every line touched by an
ignored commit will be marked with either a '?' or a '*'.
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commits that make formatting changes or function renames are often not
interesting when blaming a file. A user may deem such a commit as 'not
interesting' and want to ignore and its changes it when assigning blame.
For example, say a file has the following git history / rev-list:
---O---A---X---B---C---D---Y---E---F
Commits X and Y both touch a particular line, and the other commits do
not:
X: "Take a third parameter"
-MyFunc(1, 2);
+MyFunc(1, 2, 3);
Y: "Remove camelcase"
-MyFunc(1, 2, 3);
+my_func(1, 2, 3);
git-blame will blame Y for the change. I'd like to be able to ignore Y:
both the existence of the commit as well as any changes it made. This
differs from -S rev-list, which specifies the list of commits to
process for the blame. We would still process Y, but just don't let the
blame 'stick.'
This patch adds the ability for users to ignore a revision with
--ignore-rev=rev, which may be repeated. They can specify a set of
files of full object names of revs, e.g. SHA-1 hashes, one per line. A
single file may be specified with the blame.ignoreRevFile config option
or with --ignore-rev-file=file. Both the config option and the command
line option may be repeated multiple times. An empty file name "" will
clear the list of revs from previously processed files. Config options
are processed before command line options.
For a typical use case, projects will maintain the file containing
revisions for commits that perform mass reformatting, and their users
have the option to ignore all of the commits in that file.
Additionally, a user can use the --ignore-rev option for one-off
investigation. To go back to the example above, X was a substantive
change to the function, but not the change the user is interested in.
The user inspected X, but wanted to find the previous change to that
line - perhaps a commit that introduced that function call.
To make this work, we can't simply remove all ignored commits from the
rev-list. We need to diff the changes introduced by Y so that we can
ignore them. We let the blames get passed to Y, just like when
processing normally. When Y is the target, we make sure that Y does not
*keep* any blames. Any changes that Y is responsible for get passed to
its parent. Note we make one pass through all of the scapegoats
(parents) to attempt to pass blame normally; we don't know if we *need*
to ignore the commit until we've checked all of the parents.
The blame_entry will get passed up the tree until we find a commit that
has a diff chunk that affects those lines.
One issue is that the ignored commit *did* make some change, and there is
no general solution to finding the line in the parent commit that
corresponds to a given line in the ignored commit. That makes it hard
to attribute a particular line within an ignored commit's diff
correctly.
For example, the parent of an ignored commit has this, say at line 11:
commit-a 11) #include "a.h"
commit-b 12) #include "b.h"
Commit X, which we will ignore, swaps these lines:
commit-X 11) #include "b.h"
commit-X 12) #include "a.h"
We can pass that blame entry to the parent, but line 11 will be
attributed to commit A, even though "include b.h" came from commit B.
The blame mechanism will be looking at the parent's view of the file at
line number 11.
ignore_blame_entry() is set up to allow alternative algorithms for
guessing per-line blames. Any line that is not attributed to the parent
will continue to be blamed on the ignored commit as if that commit was
not ignored. Upcoming patches have the ability to detect these lines
and mark them in the blame output.
The existing algorithm is simple: blame each line on the corresponding
line in the parent's diff chunk. Any lines beyond that stay with the
target.
For example, the parent of an ignored commit has this, say at line 11:
commit-a 11) void new_func_1(void *x, void *y);
commit-b 12) void new_func_2(void *x, void *y);
commit-c 13) some_line_c
commit-d 14) some_line_d
After a commit 'X', we have:
commit-X 11) void new_func_1(void *x,
commit-X 12) void *y);
commit-X 13) void new_func_2(void *x,
commit-X 14) void *y);
commit-c 15) some_line_c
commit-d 16) some_line_d
Commit X nets two additionally lines: 13 and 14. The current
guess_line_blames() algorithm will not attribute these to the parent,
whose diff chunk is only two lines - not four.
When we ignore with the current algorithm, we get:
commit-a 11) void new_func_1(void *x,
commit-b 12) void *y);
commit-X 13) void new_func_2(void *x,
commit-X 14) void *y);
commit-c 15) some_line_c
commit-d 16) some_line_d
Note that line 12 was blamed on B, though B was the commit for
new_func_2(), not new_func_1(). Even when guess_line_blames() finds a
line in the parent, it may still be incorrect.
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The stash.useBuiltin variable introduced in 90a462725e ("stash:
optionally use the scripted version again", 2019-02-25) was turned on by
default, but had no documentation.
Let's document it so that users who run into any stability issues with
the C rewrite know there's an escape hatch, and spell out that the
user should please report the bug when they have to turn off the
built-in stash.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The connectivity bitmaps are created by default in bare
repositories now; also the pathname hash-cache is created by
default to avoid making crappy deltas when repacking.
* ew/repack-with-bitmaps-by-default:
pack-objects: default to writing bitmap hash-cache
t5310: correctly remove bitmaps for jgit test
repack: enable bitmaps by default on bare repos
Polishing of the new trace2 facility continues. The system-level
configuration can specify site-wide trace2 settings, which can be
overridden with per-user configuration and environment variables.
* jh/trace2-sid-fix:
trace2: fixup access problem on /etc/gitconfig in read_very_early_config
trace2: update docs to describe system/global config settings
trace2: make SIDs more unique
trace2: clarify UTC datetime formatting
trace2: report peak memory usage of the process
trace2: use system/global config for default trace2 settings
config: add read_very_early_config()
trace2: find exec-dir before trace2 initialization
trace2: add absolute elapsed time to start event
trace2: refactor setting process starting time
config: initialize opts structure in repo_read_config()
"git tag" learned to give an advice suggesting it might be a
mistake when creating an annotated or signed tag that points at
another tag.
* dl/warn-tagging-a-tag:
tag: advise on nested tags
tag: fix formatting
"git merge-recursive" backend recently learned a new heuristics to
infer file movement based on how other files in the same directory
moved. As this is inherently less robust heuristics than the one
based on the content similarity of the file itself (rather than
based on what its neighbours are doing), it sometimes gives an
outcome unexpected by the end users. This has been toned down to
leave the renamed paths in higher/conflicted stages in the index so
that the user can examine and confirm the result.
* en/merge-directory-renames:
merge-recursive: switch directory rename detection default
merge-recursive: give callers of handle_content_merge() access to contents
merge-recursive: track information associated with directory renames
t6043: fix copied test description to match its purpose
merge-recursive: switch from (oid,mode) pairs to a diff_filespec
merge-recursive: cleanup handle_rename_* function signatures
merge-recursive: track branch where rename occurred in rename struct
merge-recursive: remove ren[12]_other fields from rename_conflict_info
merge-recursive: shrink rename_conflict_info
merge-recursive: move some struct declarations together
merge-recursive: use 'ci' for rename_conflict_info variable name
merge-recursive: rename locals 'o' and 'a' to 'obuf' and 'abuf'
merge-recursive: rename diff_filespec 'one' to 'o'
merge-recursive: rename merge_options argument from 'o' to 'opt'
Use 'unsigned short' for mode, like diff_filespec does
Previously the switching branch business of 'git checkout' becomes a
new command 'switch'. This adds the restore command for the checking
out paths path.
Similar to git-switch, a new man page is added to describe what the
command will become. The implementation will be updated shortly to
match the man page.
A couple main differences from 'git checkout <paths>':
- 'restore' by default will only update worktree. This matters more
when --source is specified ('checkout <tree> <paths>' updates both
worktree and index).
- 'restore --staged' can be used to restore the index. This command
overlaps with 'git reset <paths>'.
- both worktree and index could also be restored at the same time
(from a tree) when both --staged and --worktree are specified. This
overlaps with 'git checkout <tree> <paths>'
- default source for restoring worktree and index is the index and
HEAD respectively. A different (tree) source could be specified as
with --source (*).
- when both index and worktree are restored, --source must be
specified since the default source for these two individual targets
are different (**)
- --no-overlay is enabled by default, if an entry is missing in the
source, restoring means deleting the entry
(*) I originally went with --from instead of --source. I still think
--from is a better name. The short option -f however is already
taken by force. And I do think short option is good to have, e.g. to
write -s@ or -s@^ instead of --source=HEAD.
(**) If you sit down and think about it, moving worktree's source from
the index to HEAD makes sense, but nobody is really thinking it
through when they type the commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clean-up markup in the documentation suite.
* cb/doco-mono:
doc: format pathnames and URLs as monospace.
doc/CodingGuidelines: URLs and paths as monospace
Documentation mark-up fixes.
* ma/asciidoctor-fixes-more:
Documentation: turn middle-of-line tabs into spaces
git-svn.txt: drop escaping '\' that ends up being rendered
git.txt: remove empty line before list continuation
config/fsck.txt: avoid starting line with dash
config/diff.txt: drop spurious backtick
Robert Dailey reported confusion on the mailing list about a nested
tag which was most likely created by mistake. Jeff King noted that
this isn't a very common case and creating a tag-to-a-tag can be a
user-error.
Suggest that it may be a mistake with an advice message when
creating such a tag. Those who do want to create a tag that point
at another tag regularly can turn it off with the usual advice
mechanism.
Reported-by: Robert Dailey <rcdailey.lists@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
[jc: fixed test style and tweaked the log message]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 07e7dbf0db (gc: default aggressive depth to 50, 2016-08-11) we
somewhat confusingly use the same depth under --aggressive as we do by
default.
As noted in that commit that makes sense, it was wrong to make more
depth the default for "aggressive", and thus save disk space at the
expense of runtime performance, which is usually the opposite of
someone who'd like "aggressive gc" wants.
But that's left us with a mostly-redundant configuration variable, so
let's clearly note in its documentation that it doesn't change the
default.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
