These test cases focus only on testing the parsing of refs on stdin,
without bothering with the rest of the fetch-pack machinery. We pass in
the refs using different combinations of command line and stdin and then
we watch fetch-pack's stdout to see whether it prints all the refs we
specified (but we ignore their order).
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we can throw an arbitrary number of refs at fetch-pack using
its --stdin option, we use it in the remote-curl helper to bypass the
OS command line length limit.
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The syntax for the use of mark references in fast-import
demands either a SP (space) or LF (end-of-line) after
a mark reference. Fast-import does not complain when garbage
appears after a mark reference in some cases.
Factor out parsing of mark references and complain if
errant characters are found. Also be a little more careful
when parsing "inline" and SHA1s, complaining if extra
characters appear or if the form of the dataref is unrecognized.
Buggy input can cause fast-import to produce the wrong output,
silently, without error. This makes it difficult to track
down buggy generators of fast-import streams. An example is
seen in the last line of this commit command:
commit refs/heads/S2
committer Name <name@example.com> 1112912893 -0400
data <<COMMIT
commit message
COMMIT
from :1M 100644 :103 hello.c
It is missing a newline and should be:
[...]
from :1
M 100644 :103 hello.c
What fast-import does is to produce a commit with the same
contents for hello.c as in refs/heads/S2^. What the buggy
program was expecting was the contents of blob :103. While
the resulting commit graph looked correct, the contents in
some commits were wrong.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if we even have a parameter before checking its value. Running
this command without any arguments may not make a lot of sense, but
reacting with a segmentation fault is unduly harsh.
While we're at it, avoid casting argv by declaring it const right away.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add void to make it match its definition in submodule.c.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print out a trailing newline when --show-prefix is run with cwd
at the top level of the tree which results in an empty prefix.
Behavior is now like --show-cdup.
Fixes an expected failure in t1501.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HTTP authentication is currently handled by get_refs and fetch_ref, but
not by fetch_object, fetch_pack or fetch_alternates. In the
single-threaded case, this is not an issue, since get_refs is always
called first. It recognigzes the 401 and prompts the user for
credentials, which will then be used subsequently.
If the curl multi interface is used, however, only the multi handle used
by get_refs will have credentials configured. Requests made by other
handles fail with an authentication error.
Fix this by setting CURLOPT_USERPWD whenever a slot is requested.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a repo with multiple loose objects in order to demonstrate http
authentication breakage.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-rebase--interactive stops due to a conflict and the only change
to be committed is in a submodule, the test for whether there is
anything to be committed ignores the staged submodule change. This
leads rebase to skip creating the commit for the change.
While unstaged submodule changes should be ignored to avoid needing to
update submodules during a rebase, it is safe to remove the
--ignore-submodules option to diff-index because --cached ensures that
it is only checking the index. This was discussed in [1] and a test is
included to ensure that unstaged changes are still ignored correctly.
[1] http://thread.gmane.org/gmane.comp.version-control.git/188713
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sed provided by Solaris in /usr/xpg4/bin has a bug whereby an
unanchored regex using * for zero or more repetitions sees two
separate matches fed to the substitution engine in some cases.
This is evidenced by:
$ for sed in /usr/xpg4/bin/sed /usr/bin/sed /opt/csw/gnu/sed; do \
echo 'ab' | $sed -e 's|[a]*|X|g'; \
done
XXbX
XbX
XbX
This bug was triggered during a git submodule clone operation as
exercised in the setup stage of t5526-fetch-submodules when using the
default SANE_TOOL_PATH for Solaris. It led to paths such as
..../.. being used in the submodule .git gitdir reference.
Using the expression 's|\([^/]*\(/*\)\)|..\2|g' provides the desired
result with all three three tested sed implementations but is harder
to read. As we do not need to handle fully qualified paths though,
the expression could actually be [^/]+ which isn't properly handled
either. Instead, use [^/][^/]*, as suggested by Andreas Schwab, which
works on all three tested sed implementations.
The new expression is semantically different than the original one.
It will not place a leading '..' on a fully qualified path as the
original expression did. All of the paths being passed through this
regex are relative and did not rely on this behaviour so it's a safe
change.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/cache-tree:
t0090: be prepared that 'wc -l' writes leading blanks
reset: update cache-tree data when appropriate
commit: write cache-tree data when writing index anyway
Refactor cache_tree_update idiom from commit
Test the current state of the cache-tree optimization
Add test-scrap-cache-tree
* cb/maint-t5541-make-server-port-portable:
t5541: check error message against the real port number used
remote-curl: Fix push status report when all branches fail
* tr/maint-bundle-boundary:
bundle: keep around names passed to add_pending_object()
t5510: ensure we stay in the toplevel test dir
t5510: refactor bundle->pack conversion
* tr/maint-bundle-long-subject:
t5704: match tests to modern style
strbuf: improve strbuf_get*line documentation
bundle: use a strbuf to scan the log for boundary commits
bundle: put strbuf_readline_fd in strbuf.c with adjustments
Otherwise:
/usr/bin/perl Makefile.PL PREFIX='/opt/git' INSTALL_BASE=''
Can't locate ExtUtils/MakeMaker.pm in @INC (@INC contains: ...) at Makefile.PL line 1.
BEGIN failed--compilation aborted at Makefile.PL line 1.
make[1]: *** [perl.mak] Error 2
make: *** [perl/perl.mak] Error 2
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When execvp reports EACCES, it can be one of two things:
1. We found a file to execute, but did not have
permissions to do so.
2. We did not have permissions to look in some directory
in the $PATH.
In the former case, we want to consider this a
permissions problem and report it to the user as such (since
getting this for something like "git foo" is likely a
configuration error).
In the latter case, there is a good chance that the
inaccessible directory does not contain anything of
interest. Reporting "permission denied" is confusing to the
user (and prevents our usual "did you mean...?" lookup). It
also prevents git from trying alias lookup, since we do so
only when an external command does not exist (not when it
exists but has an error).
This patch detects EACCES from execvp, checks whether we are
in case (2), and if so converts errno to ENOENT. This
behavior matches that of "bash" (but not of simpler shells
that use execvp more directly, like "dash").
Test stolen from Junio.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The POSIX standard specifies a return type of int for all six exec
functions. In addition, all exec functions return -1 on error, and
simply do not return on success. However, the current emulation of
the exec functions on mingw are declared with a void return type.
This would cause a problem should any code attempt to call the
exec function in a non-void context. In particular, if an exec
function were used in a conditional it would fail to compile.
In order to improve the fidelity of the emulation, we change the
return type of the mingw_execv[p] functions to int and return -1
on error.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user can say "git push" without specifying any refspec. When using
the "upstream" semantics via the push.default configuration, the user
wants to update the "upstream" branch of the current branch, which is the
branch at a remote repository the current branch is set to integrate with,
with this command.
However, there are cases that such a "git push" that uses the "upstream"
semantics does not make sense:
- The current branch does not have branch.$name.remote configured. By
definition, "git push" that does not name where to push to will not
know where to push to. The user may explicitly say "git push $there",
but again, by definition, no branch at repository $there is set to
integrate with the current branch in this case and we wouldn't know
which remote branch to update.
- The current branch does have branch.$name.remote configured, but it
does not specify branch.$name.merge that names what branch at the
remote this branch integrates with. "git push" knows where to push in
this case (or the user may explicitly say "git push $remote" to tell us
where to push), but we do not know which remote branch to update.
- The current branch does have its remote and upstream branch configured,
but the user said "git push $there", where $there is not the remote
named by "branch.$name.remote". By definition, no branch at repository
$there is set to integrate with the current branch in this case, and
this push is not meant to update any branch at the remote repository
$there.
The first two cases were already checked correctly, but the third case was
not checked and we ended up updating the branch named branch.$name.merge
at repository $there, which was totally bogus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "add -p" sees an unmerged entry, it shows the combined
diff and then immediately skips the hunk. This can be
confusing in a variety of ways, depending on whether there
are other changes to stage (in which case you get the
superfluous combined diff output in between other hunks) or
not (in which case you get the combined diff and the program
exits immediately, rather than seeing "No changes").
The current behavior was not planned, and is just what the
implementation happens to do. Instead, let's explicitly
remove unmerged entries from our list of modified files, and
print a warning that we are ignoring them.
We can cheaply find which entries are unmerged by adding
"--raw" output to the "diff-files --numstat" we already run.
There is one non-obvious thing we must change when parsing
this combined output. Before this patch, when we saw a
numstat line for a file that did not have index changes, we
would create a new record with 'unchanged' in the 'INDEX'
field. Because "--raw" comes before "--numstat", we must
move this special-case down to the raw-line case (and it is
sufficient to move it rather than handle it in both places,
since any file which has a --numstat will also have a --raw
entry).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of "commit -t <file>" said the file is used "as the
initial version" of the commit message, but in the context of an SCM,
"version" is a loaded word that can needlesslyl confuse readers.
Explain the purpose of the mechanism without using "version".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a remote repo has too many tags (or branches), cloning it over the
smart HTTP transport can fail because remote-curl.c puts all the refs
from the remote repo on the fetch-pack command line. This can make the
command line longer than the global OS command line limit, causing
fetch-pack to fail.
This is especially a problem on Windows where the command line limit is
orders of magnitude shorter than Linux. There are already real repos out
there that msysGit cannot clone over smart HTTP due to this problem.
Here is an easy way to trigger this problem:
git init too-many-refs
cd too-many-refs
echo bla > bla.txt
git add .
git commit -m test
sha=$(git rev-parse HEAD)
tag=$(perl -e 'print "bla" x 30')
for i in `seq 50000`; do
echo $sha refs/tags/$tag-$i >> .git/packed-refs
done
Then share this repo over the smart HTTP protocol and try cloning it:
$ git clone http://localhost/.../too-many-refs/.git
Cloning into 'too-many-refs'...
fatal: cannot exec 'fetch-pack': Argument list too long
50k tags is obviously an absurd number, but it is required to
demonstrate the problem on Linux because it has a much more generous
command line limit. On Windows the clone fails with as little as 500
tags in the above loop, which is getting uncomfortably close to the
number of tags you might see in real long lived repos.
This is not just theoretical, msysGit is already failing to clone our
company repo due to this. It's a large repo converted from CVS, nearly
10 years of history.
Four possible solutions were discussed on the Git mailing list (in no
particular order):
1) Call fetch-pack multiple times with smaller batches of refs.
This was dismissed as inefficient and inelegant.
2) Add option --refs-fd=$n to pass a an fd from where to read the refs.
This was rejected because inheriting descriptors other than
stdin/stdout/stderr through exec() is apparently problematic on Windows,
plus it would require changes to the run-command API to open extra
pipes.
3) Add option --refs-from=$tmpfile to pass the refs using a temp file.
This was not favored because of the temp file requirement.
4) Add option --stdin to pass the refs on stdin, one per line.
In the end this option was chosen as the most efficient and most
desirable from scripting perspective.
There was however a small complication when using stdin to pass refs to
fetch-pack. The --stateless-rpc option to fetch-pack also uses stdin for
communication with the remote server.
If we are going to sneak refs on stdin line by line, it would have to be
done very carefully in the presence of --stateless-rpc, because when
reading refs line by line we might read ahead too much data into our
buffer and eat some of the remote protocol data which is also coming on
stdin.
One way to solve this would be to refactor get_remote_heads() in
fetch-pack.c to accept a residual buffer from our stdin line parsing
above, but this function is used in several places so other callers
would be burdened by this residual buffer interface even when most of
them don't need it.
In the end we settled on the following solution:
If --stdin is specified without --stateless-rpc, fetch-pack would read
the refs from stdin one per line, in a script friendly format.
However if --stdin is specified together with --stateless-rpc,
fetch-pack would read the refs from stdin in packetized format
(pkt-line) with a flush packet terminating the list of refs. This way we
can read the exact number of bytes that we need from stdin, and then
get_remote_heads() can continue reading from the same fd without losing
a single byte of remote protocol data.
This way the --stdin option only loses generality and scriptability when
used together with --stateless-rpc, which is not easily scriptable
anyway because it also uses pkt-line when talking to the remote server.
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The changes to the dialog window tree broke the preview of the selected
font on the button. This corrects that issue.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 8.5 the incr command creates the target variable if it does not exist
but in 8.4 using incr on a non-existing variable raises an error. Ensure
we have created our counter variable when creating the tabbed dialog for
non-themed preferences.
Reported-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Portuguese Portuguese translations from Marco Sousa via Jiang Xin
* 'master' of git://github.com/git-l10n/git-po:
l10n: Add the Dutch translation team and initialize nl.po
l10n: Inital Portuguese Portugal language (pt_PT)
l10n: Improve zh_CN translation for Git 1.7.10-rc3
Make it clear that, when using commit --template, the message *must* be
changed or the commit will be aborted.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ivan Heffner <iheffner@gmail.com>
Signed-off-by: Adam Monsen <haircut@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user exited editor without editing the commit log template given
by "git commit -t <template>", the commit was aborted (correct) with an
error message that said "due to empty commit message" (incorrect).
This was because the original template support was done by piggybacking on
the check to detect an empty log message. Split the codepaths into two
independent checks to clarify the error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "-t template" and "-F msg" options are both given (or worse yet,
there is "commit.template" configuration but a message is given in some
other way), the documentation says that template is ignored. However,
the "has the user edited the message?" check still used the contents of
the template file as the basis of the emptyness check.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests try to run "git commit" with various "forbidden" combinations
of options and expect the command to fail, but they do so without having
any change added to the index. We wouldn't be able to catch breakages
that would allow these combinations by mistake with them because the
command will fail with "nothing to commit" anyway.
Make sure we have something added to the index before running the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The http-backend program sets default GIT_COMMITTER_NAME and
GIT_COMMITTER_EMAIL variables based on the REMOTE_USER and
REMOTE_ADDR variables provided by the webserver. However, it
unconditionally overwrites any existing GIT_COMMITTER
variables, which may have been customized by site-specific
code in the webserver (or in a script wrapping http-backend).
Let's leave those variables intact if they already exist,
assuming that any such configuration was intentional. There
is a slight chance of a regression if somebody has set
GIT_COMMITTER_* for the entire webserver, not intending it
to leak through http-backend. We could protect against this
by passing the information in alternate variables. However,
it seems unlikely that anyone will care about that
regression, and there is value in the simplicity of using
the common variable names that are used elsewhere in git.
While we're tweaking the environment-handling in
http-backend, let's switch it to use argv_array to handle
the list of variables. That makes the memory management much
simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improvements of zh_CN translations:
- Update translation for msg "Changes not staged for commit:".
- Remove unnecessary leading spaces for some messages.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
v1.7.9-8-g270a344 (config: stop using config_exclusive_filename) replaced
config_exclusive_filename with given_config_file. In one case this
resulted in a self-assignment, which is reported by clang as a warning.
Remove the useless code.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Found by running this command:
$ git ls-files -z|xargs -0 perl -0777 -n \
-e 'while (/\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt]o)\s+\1\b/gims)' \
-e ' {' \
-e ' $n = ($` =~ tr/\n/\n/ + 1);' \
-e ' ($v = $&) =~ s/\n/\\n/g;' \
-e ' print "$ARGV:$n:$v\n";' \
-e ' }'
Why not just git grep -E ...?
That wouldn't work then the doubled words are separated by a newline.
This is derived from a Makefile syntax-check rule in gnulib's maint.mk:
http://git.sv.gnu.org/cgit/gnulib.git/tree/top/maint.mk
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
