Change "to made" to "made to", which is a typo. Use "reflog"
instead of "ref log", which is used elsewhere throughout the
documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc treats {foo} as an attribute to be substituted; if
'foo' doesn't exist as an attribute, then the entire line
gets dropped. When the literal {foo} is desired, \{foo} is
required.
The exceptions to this rule are:
- inside literal blocks
- if the 'foo' contains non-alphanumeric characters (e.g.,
{foo|bar} is assumed not to be an attribute)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using "-b --track newbranch oldbranch" gives the error:
git checkout: updating paths is incompatible with switching
branches/forcing
However, "--track -b ..." works just fine.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix the description of the --no-track option so it no longer says the
opposite of what was intended. Also mention branch.autosetupmerge
explicitly.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"Force a re-read of everything" doesn't mean much to me.
Also some minor grammar fixes.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In order to track and build on top of a branch 'topic' you track from
your upstream repository, you often would end up doing this sequence:
git checkout -b mytopic origin/topic
git config --add branch.mytopic.remote origin
git config --add branch.mytopic.merge refs/heads/topic
This would first fork your own 'mytopic' branch from the 'topic'
branch you track from the 'origin' repository; then it would set up two
configuration variables so that 'git pull' without parameters does the
right thing while you are on your own 'mytopic' branch.
This commit adds a --track option to git-branch, so that "git
branch --track mytopic origin/topic" performs the latter two actions
when creating your 'mytopic' branch.
If the configuration variable branch.autosetupmerge is set to true, you
do not have to pass the --track option explicitly; further patches in
this series allow setting the variable with a "git remote add" option.
The configuration variable is off by default, and there is a --no-track
option to countermand it even if the variable is set.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since `git add` is the approved porcelain for an end-user to invoke
when they want to manipulate the index, porcelain documentation
should steer the user to this command rather than the pure plumbing
update-index.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The documentation still talked about the unnecessary 'safety'
in git-checkout.
Pointed out by Matthias Lederhofer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Those new messages are certainly nice, but there might be cases where
they are simply unwelcome, like when git-commit is used within scripts.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add discussion section to git-checkout documentation and mention
detached HEAD in repository-layout document.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* sp/reflog:
Enable ref log creation in git checkout -b.
Create/delete branch ref logs.
Include ref log detail in commit, reset, etc.
Change order of -m option to update-ref.
Correct force_write bug in refs.c
Change 'master@noon' syntax to 'master@{noon}'.
Log ref updates made by fetch.
Force writing ref if it doesn't exist.
Added logs/ directory to repository layout.
General ref log reading improvements.
Fix ref log parsing so it works properly.
Support 'master@2 hours ago' syntax
Log ref updates to logs/refs/<ref>
Convert update-ref to use ref_lock API.
Improve abstraction of ref lock/write.
Its nice to have git-check-ref-format actually get mentioned in
git-branch's documentation as the syntax of a ref name must conform
to what is described in git-check-ref-format.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Switch git checkout -b to use git-update-ref rather than echo and
a shell I/O redirection. This is more in line with typical GIT
commands and allows -b to be logged according to the normal ref
logging rules.
Added -l option to allow users to create the ref log at the same
time as creating a branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Unfortunately docbook does not allow a callout to be
referenced from inside a callout list description.
Rewrite one paragraph in git-reset man page to work
around this limitation.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
* Instead of going interactive, introduce a command line switch
'-m' to allow merging changes when normal two-way merge by
read-tree prevents branch switching.
* Leave the unmerged stages intact if automerge fails, but
reset index entries of cleanly merged paths to that of the
new branch, so that "git diff" (not "git diff HEAD") would
show the local modifications.
* Swap the order of trees in read-tree three-way merge used in
the fallback, so that `git diff` to show the conflicts become
more natural.
* Describe the new option and give more examples in the documentation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When extra paths arguments are given, git-checkout reverts only those
paths to either the version recorded in the index or the version
recorded in the given tree-ish.
This has been on the TODO list for quite a while.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The replacement was performed automatically by these commands:
perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \
README Documentation/*.txt
perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \
README Documentation/*.txt
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
