"pull --rebase" internally uses the merge machinery when the other
history is a descendant of ours (i.e. perform fast-forward). This
came from [1], where the discussion was started from a feature
request to do so. It is a bit hard to read the rationale behind it
in the discussion, but it seems that it was an established fact for
everybody involved that does not even need to be mentioned that
fast-forwarding done with "rebase" was much undesirable than done
with "merge", and more importantly, the result left by "merge" is as
good as (or better than) that by "rebase".
Except for one thing. Because "git merge" does not (and should not)
honor rebase.autostash, "git pull" needs to read it and forward it
when we use "git merge" as a (hopefully better) substitute for "git
rebase" during the fast-forwarding. But we forgot to do so (we only
add "--[no-]autostash" to the "git merge" command when "git pull" itself
was invoked with "--[no-]autostash" command line option.
Make sure "git merge" is run with "--autostash" when
rebase.autostash is set and used to fast-forward the history on
behalf of "git rebase". Incidentally this change also takes care of
the case where
- "git pull --rebase" (without other command line options) is run
- "rebase.autostash" is not set
- The history fast-forwards
In such a case, "git merge" is run with an explicit "--no-autostash"
to prevent it from honoring merge.autostash configuration, which is
what we want. After all, we want the "git merge" to pretend as if
it is "git rebase" while being used for this purpose.
[1] https://lore.kernel.org/git/xmqqa8cfbkeq.fsf_-_@gitster.mtv.corp.google.com/
Reported-by: Tilman Vogel <tilman.vogel@web.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--preserve-merges" option of "git rebase" has been removed.
* js/retire-preserve-merges:
sequencer: restrict scope of a formerly public function
rebase: remove a no-longer-used function
rebase: stop mentioning the -p option in comments
rebase: remove obsolete code comment
rebase: drop the internal `rebase--interactive` command
git-svn: drop support for `--preserve-merges`
rebase: drop support for `--preserve-merges`
pull: remove support for `--rebase=preserve`
tests: stop testing `git rebase --preserve-merges`
remote: warn about unhandled branch.<name>.rebase values
t5520: do not use `pull.rebase=preserve`
This backend has been deprecated in favor of `git rebase
--rebase-merges`.
In preparation for dropping it, let's remove all the regression tests
that would need it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if those tests try to override that setting, let's not use it
because it is deprecated: let's use `merges` instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have for some time shown a long warning when the user does not
specify how to reconcile divergent branches with git pull. Make it an
error now.
Initial-patch-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --printf option to test_commit to allow writing to the file with
"printf" instead of "echo".
This is useful for writing "\n", "\0" etc., in particular in
combination with the --append option added in 3373518cc8 (test-lib
functions: add an --append option to test_commit, 2021-01-12).
I'm converting a few tests to use the new option rather than a manual
printf/add/commit combination to demonstrate its usefulness. While I'm
at it use "test_create_repo" where appropriate, and give the
first/second commit a meaningful/more conventional log message in
cases where no test cared about that message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t5526, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t55[23]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/naster/nain/g' -- \
t55[23]*.sh &&
git checkout HEAD -- t5526\*)
Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.
This commit allows us to define
`GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for that range of tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using a BRE, that broke tests 30-32, 37-39, 42 at least with
OpenBSD 6.7; use a simpler ERE.
Fixes: d9f15d37f1 (pull: pass --autostash to merge, 2020-04-07)
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, `--autostash` only worked with `git pull --rebase`. However, in
the last patch, merge learned `--autostash` as well so there's no reason
why we should have this restriction anymore. Teach pull to pass
`--autostash` to merge, just like it did for rebase.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, test_pull_autostash() was hardcoded to run
`test_cmp_rev HEAD^ copy` to test that a rebase happened. However, in a
future patch, we plan on testing merging as well. Make
test_pull_autostash() accept a parent number as an argument so that, in
the future, we can test if a merge happened in addition to a rebase.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two related changes, with separate rationale for each:
Rename the 'interactive' backend to 'merge' because:
* 'interactive' as a name caused confusion; this backend has been used
for many kinds of non-interactive rebases, and will probably be used
in the future for more non-interactive rebases than interactive ones
given that we are making it the default.
* 'interactive' is not the underlying strategy; merging is.
* the directory where state is stored is not called
.git/rebase-interactive but .git/rebase-merge.
Rename the 'am' backend to 'apply' because:
* Few users are familiar with git-am as a reference point.
* Related to the above, the name 'am' makes sentences in the
documentation harder for users to read and comprehend (they may read
it as the verb from "I am"); avoiding this difficult places a large
burden on anyone writing documentation about this backend to be very
careful with quoting and sentence structure and often forces
annoying redundancy to try to avoid such problems.
* Users stumble over pronunciation ("am" as in "I am a person not a
backend" or "am" as in "the first and thirteenth letters in the
alphabet in order are "A-M"); this may drive confusion when one user
tries to explain to another what they are doing.
* While "am" is the tool driving this backend, the tool driving git-am
is git-apply, and since we are driving towards lower-level tools
for the naming of the merge backend we may as well do so here too.
* The directory where state is stored has never been called
.git/rebase-am, it was always called .git/rebase-apply.
For all the reasons listed above:
* Modify the documentation to refer to the backends with the new names
* Provide a brief note in the documentation connecting the new names
to the old names in case users run across the old names anywhere
(e.g. in old release notes or older versions of the documentation)
* Change the (new) --am command line flag to --apply
* Rename some enums, variables, and functions to reinforce the new
backend names for us as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to ensure the merge/interactive backend gets similar coverage
to the am one, add some tests for cases where previously only the am
backend was tested.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, if a git command fails in an unexpected way, such as a
segfault, it will be masked and ignored. Replace the ! with
test_must_fail so that only expected failures pass.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous patches, the mechanical application of changes left some
duplicate statements in the test case which were not strictly incorrect
but were redundant and possibly misleading. Remove these duplicate
statements so that it is clear that the intent behind the tests are that
the content of the file stays the same throughout the whole test case.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently have many instances of `test <line> = $(cat <file>)` and
`test $(cat <file>) = <line>`. In the case where this fails, it will be
difficult for a developer to debug since the output will be masked.
Replace these instances with invocations of test_cmp().
This change was done with the following GNU sed expressions:
s/\(\s*\)test \([^=]*\)= "$(cat \([^)]*\))"/\1echo \2>expect \&\&\n\1test_cmp expect \3/
s/\(\s*\)test "$(cat \([^)]*\))" = \([^&]*\)\( &&\)\?$/\1echo \3 >expect \&\&\n\1test_cmp expect \2\4/
A future patch will clean up situations where we have multiple duplicate
statements within a test case. This is done to keep this patch purely
mechanical.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, if the invocation of git failed, it would be masked by the pipe
since only the return code of the last element of a pipe is used.
Rewrite the test to put the git command on its own line so its return
code is not masked.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case an invocation of a git command fails within the command
substitution, the failure will be masked. Replace the command
substitution with a file-redirection and a call to test_cmp.
This change was done with the following GNU sed expressions:
s/\(\s*\)test \([^ ]*\) = "$(\(git [^)]*\))"/\1echo \2 >expect \&\&\n\1\3 >actual \&\&\n\1test_cmp expect actual/
s/\(\s*\)test "$(\(git [^)]*\))" = \([^ ]*\)/\1echo \3 >expect \&\&\n\1\2 >actual \&\&\n\1test_cmp expect actual/
A future patch will clean up situations where we have multiple duplicate
statements within a test case. This is done to keep this patch purely
mechanical.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case an invocation of `git rev-list` fails within the command
substitution, the failure will be masked. Remove the command
substitution and use test_cmp_rev() so that failures can be discovered.
This change was done with the following sed expressions:
s/test "$(git rev-parse.* \([^)]*\))" = "$(git rev-parse \([^)]*\))"/test_cmp_rev \1 \2/
s/test \([^ ]*\) = "$(git rev-parse.* \([^)]*\))"/test_cmp_rev \1 \2/
s/test "$(git rev-parse.* \([^)]*\))" != "$(git rev-parse.* \([^)]*\))"/test_cmp_rev ! \1 \2/
s/test \([^ ]*\) != "$(git rev-parse.* \([^)]*\))"/test_cmp_rev ! \1 \2/
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When wrapping a git command in a command substitution within another
command, we throw away the git command's exit code. In case the git
command fails, we would like to know about it rather than the failure
being silent. Extract git commands so that their exit codes are not
lost.
Instead of using `test -n` or `test -z`, replace them respectively with
invocations of test_file_not_empty() and test_must_be_empty() so that we
get better debugging information in the case of a failure.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of rolling our own functionality to test the number of lines a
command outputs, use test_line_count() which provides better debugging
information in the case of a failure.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The style for tests in Git is to have the redirect operator attached to
the filename with no spaces. Fix test cases where this is not the case.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although `test -f` has the same functionality as test_path_is_file(), in
the case where test_path_is_file() fails, we get much better debugging
information.
Replace `test -f` with test_path_is_file() so that future developers
will have a better experience debugging these test cases.
Also, in the case of `! test -f`, not only should that path not be a
file, it shouldn't exist at all so replace it with
test_path_is_missing().
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were using a redirection operator to feed input into sed. However,
since sed is capable of opening its own files, make sed open its own
files instead of redirecting input into it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usual convention is for test case names to be written between
single-quotes. Change all double-quoted test case names to single-quotes
except for two test case names that use variables within.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the test style by removing leading and trailing empty lines
within test cases. Also, reformat multi-line subshells to conform to the
existing style.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--preserve-merges` mode of the `rebase` command is slated to be
deprecated soon, as the more powerful `--rebase-merges` mode is
available now, and the latter was designed with the express intent to
address the shortcomings of `--preserve-merges`' design (e.g. the
inability to reorder commits in an interactive rebase).
As such, we will eventually even remove the `--preserve-merges` support,
and along with it, its tests.
In preparation for this, and also to allow the Windows phase of our
automated tests to save some well-needed time when running the test
suite, this commit introduces a new prerequisite REBASE_P, which can be
forced to being unmet by setting the environment variable
`GIT_TEST_SKIP_REBASE_P` to any non-empty string.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull --rebase=interactive" learned "i" as a short-hand for
"interactive".
* js/pull-rebase-type-shorthand:
pull --rebase=<type>: allow single-letter abbreviations for the type
Git for Windows' original 4aa8b8c8283 (Teach 'git pull' to handle
--rebase=interactive, 2011-10-21) had support for the very convenient
abbreviation
git pull --rebase=i
which was later lost when it was ported to the builtin `git pull`, and
it was not introduced before the patch eventually made it into Git as
f5eb87b98d (pull: allow interactive rebase with --rebase=interactive,
2016-01-13).
However, it is *really* a useful short hand for the occasional rebasing
pull on branches that do not usually want to be rebased.
So let's reintroduce this convenience, at long last.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If has_uncommitted_changes() can't resolve HEAD (e.g.,
because it's unborn or corrupt), then we end up calling
run_diff_index() with an empty revs.pending array. This
causes a segfault, as run_diff_index() blindly looks at the
first pending item.
Fixing this raises a question of fault: should
run_diff_index() handle this case, or is the caller wrong to
pass an empty pending list?
Looking at the other callers of run_diff_index(), they
handle this in one of three ways:
- they resolve the object themselves, and avoid doing the
diff if it's not valid
- they resolve the object themselves, and fall back to the
empty tree
- they use setup_revisions(), which will die() if the
object isn't valid
Since this is the only broken caller, that argues that the
fix should go there. Falling back to the empty tree makes
sense here, as we'd claim uncommitted changes if and only if
the index is non-empty. This may be a little funny in the
case of corruption (the corrupt HEAD probably _isn't_
empty), but:
- we don't actually know the reason here that HEAD didn't
resolve (the much more likely case is that we have an
unborn HEAD, in which case the empty tree comparison is
the right thing)
- this matches how other code, like "git diff", behaves
While we're thinking about it, let's add an assertion to
run_diff_index(). It should always be passed a single
object, and as this bug shows, it's easy to get it wrong
(and an assertion is easier to hunt down than a segfault, or
a quietly ignored extra tree).
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git UI can be improved by addressing the error messages to those
they help: inexperienced and casual git users. To this intent, it is
helpful to make sure the terms used in those messages can be understood
by this segment of users, and that they guide them to resolve the
problem.
In particular, failure to apply a patch during a git rebase is a common
problem that can be very destabilizing for the inexperienced user. It is
important to lead them toward the resolution of the conflict (which is a
3-steps process, thus complex) and reassure them that they can escape a
situation they can't handle with "--abort". This commit answer those two
points by detailling the resolution process and by avoiding cryptic git
linguo.
Signed-off-by: William Duclot <william.duclot@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git pull --rebase --autostash` in a dirty repository resulted in a
fast-forward, nothing was being autostashed and the pull failed. This
was due to a shortcut to avoid running rebase when we can fast-forward,
but autostash is ignored on that codepath.
Now we will only take the shortcut if autostash is not in effect.
Based on a few tests against the git.git repo, the shortcut does not
seem to give us significant performance benefits, on Linux at least.
Regardless, it is more important to be correct than to be fast.
Signed-off-by: Tyler Brazier <tyler@tylerbrazier.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull --rebase", when there is no new commits on our side since
we forked from the upstream, should be able to fast-forward without
invoking "git rebase", but it didn't.
* jc/pull-rebase-ff:
pull: fast-forward "pull --rebase=true"
"git pull --rebase" always runs "git rebase" after fetching the
commit to serve as the new base, even when the new base is a
descendant of the current HEAD, i.e. we haven't done any work.
In such a case, we can instead fast-forward to the new base without
invoking the rebase process.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_i18ngrep function instead of grep for grepping strings.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was noticed by Brendan Forster last October that the builtin `git am`
regressed on that. Our hot fix reverted to spawning the recursive merge
instead of using it as a library function.
As we are about to revert that hot fix, after making the recursive merge a
true library function (i.e. a function that does not die() in case of
"normal" errors), let's add a test that verifies that we do not regress on
the same problem which made the hot fix necessary in the first place.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More markings of messages for i18n, with updates to various tests
to pass GETTEXT_POISON tests.
One patch from the original submission dropped due to conflicts
with jk/upload-pack-hook, which is still in flux.
* va/i18n-even-more: (38 commits)
t5541: become resilient to GETTEXT_POISON
i18n: branch: mark comment when editing branch description for translation
i18n: unmark die messages for translation
i18n: submodule: escape shell variables inside eval_gettext
i18n: submodule: join strings marked for translation
i18n: init-db: join message pieces
i18n: remote: allow translations to reorder message
i18n: remote: mark URL fallback text for translation
i18n: standardise messages
i18n: sequencer: add period to error message
i18n: merge: change command option help to lowercase
i18n: merge: mark messages for translation
i18n: notes: mark options for translation
i18n: notes: mark strings for translation
i18n: transport-helper.c: change N_() call to _()
i18n: bisect: mark strings for translation
t5523: use test_i18ngrep for negation
t4153: fix negated test_i18ngrep call
t9003: become resilient to GETTEXT_POISON
tests: unpack-trees: update to use test_i18n* functions
...
Mark message for translation telling the user she has conflicts to
resolve. Expose each particular use case, in order to enable translating
entire sentences which would facilitate translating into other
languages.
Change "Pull" to lowercase to match other instances. Update test
t5520-pull.sh, that relied on the old error message, to use the new one.
Although we loose in source code conciseness, we would gain better
translations because translators can 1) translate the entire sentence,
including those terms concerning Git (committing, merging, etc) 2) have
leeway to adapt to their languages.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-pull silently ignores the --verify-signatures option when
running --rebase, potentially leaving users in the belief that
the rebase operation would check for valid GPG signatures.
Implementing --verify-signatures for git-rebase was talked about,
but doubts for a valid workflow rose up. Since you usually merge
other's branches into your branch you might have an interest that
their side has a valid GPG signature.
Rebasing, on the other hand, is to rebuild your branch on top of
other's work, in order to push the result back, and it is too late
to reject their work even if you find their commits lack acceptable
signature.
Let's warn users that the --verify-signatures option is ignored
during "pull --rebase"; users do not wonder what would happen if
their commits lack acceptable signature that way.
Signed-off-by: Alexander Hirsch <1zeeky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--[no-]autostash" options for git-pull are only valid in
rebase mode (i.e. either --rebase is used or pull.rebase=true).
Existing tests already check the cases when --rebase is used but
fail to check for pull.rebase=true case.
Add two new tests to check that the --[no-]autostash options work
with pull.rebase=true.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two tests are almost similar and thus can be folded in a for-loop.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Three tests contains repetitive lines of code.
Factor out common code into test_pull_autostash_fail() and then call it in
these tests.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Four tests contains repetitive lines of code.
Factor out common code into test_pull_autostash() and then call it in
these tests.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking stderr output using test_i18ncmp may lead to test failure as
some shells write trace output to stderr when run under 'set -x'.
Use test_i18ngrep instead of test_i18ncmp.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test title says that tests are done with rebase.autostash unset,
but does not take any action to make sure that it is indeed unset.
This may lead to test failure if future changes somehow pollutes
the configuration globally.
Ensure consistent test conditions by explicitly unsetting
rebase.autostash.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If rebase.autoStash configuration variable is set, there is no way to
override it for "git pull --rebase" from the command line.
Teach "git pull --rebase" the --[no-]autostash command line flag which
overrides the current value of rebase.autoStash, if set. As "git rebase"
understands the --[no-]autostash option, it's just a matter of passing
the option to underlying "git rebase" when "git pull --rebase" is called.
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Paul Tan <pyokagan@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of years ago, I found the need to collaborate on topic
branches that were rebased all the time, and I really needed to see
what I was rebasing when pulling, so I introduced an
interactively-rebasing pull.
The way builtin pull works, this change also supports the value
'interactive' for the 'branch.<name>.rebase' config variable, which
is a neat thing because users can now configure given branches for
interactively-rebasing pulls without having to type out the complete
`--rebase=interactive` option every time they pull.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull --rebase" has been taught to pay attention to
rebase.autostash configuration.
* kd/pull-rebase-autostash:
pull: allow dirty tree when rebase.autostash enabled
