* np/dreflog:
show-branch -g: default to the current branch.
Let git-checkout always drop any detached head
Enable HEAD@{...} and make it independent from the current branch
scan reflogs independently from refs
add reflog when moving HEAD to a new branch
create_symref(): do not assume pathname from git_path() persists long enough
add logref support to git-symbolic-ref
move create_symref() past log_ref_write()
add reflog entries for HEAD when detached
enable separate reflog for HEAD
lock_ref_sha1_basic(): remember the original name of a ref when resolving it
make reflog filename independent from struct ref_lock
Mention git-revert as an alternative to git-reset to revert changes.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now we have a separate reflog on HEAD, show-branch -g without an explicit
parameter defaults to the current branch, or HEAD when it is detached
from branches.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is to resolve conflicts early in preparation for possible
inclusion of "reflog on detached HEAD" series by Nico, as having
it in 1.5.0 would really help us remove confusion between
detached and attached states.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski pointed out the positional notation in git-remote's
documentation was very confusing, especially now that we have 3
supported subcommands. Instead of referring to subcommands by
position, refer to them by name.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I was reading the tutorial and noticed that we say this:
Also, don't use "git reset" on a publicly-visible branch that
other developers pull from, as git will be confused by history
that disappears in this way.
I do not think this is a good explanation. For example, if we
do this:
(1) I build a series and push it out.
---o---o---o---j
(2) Alice clones from me, and builds two commits on top of it.
---o---o---o---j---a---a
(3) I rewind one and build a few, and push them out.
---o---o---o...j
\
h---h---h---h
(4) Alice pulls from me again:
---o---o---o---j---a---a---*
\ /
h---h---h---h
Contrary to the description, git will happily have Alice merge
between the two branches, and never gets confused.
Maybe I did not want to have 'j' because it was an incomplete
solution to some problem, and Alice may have fixed it up with
her changes, while I abandoned that approach I started with 'j',
and worked on something completely unrelated in the four 'h'
commits. In such a case, the merge Alice would make would be
very sensible, and after she makes the merge if I pull from her,
the world will be perfect. I started something with 'j' and
dropped the ball, Alice picked it up and perfected it while I
went on to work on something else with 'h'. This would be a
perfect example of distributed parallel collaboration. There is
nothing confused about it.
The case the rewinding becomes problematic is if the work done
in 'h' tries to solve the same problem as 'j' tried to solve in
a different way. Then the merge forced on Alice would make her
pick between my previous attempt with her fixups (j+a) and my
second attempt (h). If 'a' commits were to fix up what 'j'
started, presumably Alice already studied and knows enough about
the problem so she should be able to make an informed decision
to pick between what 'j+a' and 'h' do.
A lot worse case is if Alice's work is not at all related to
what 'j' wanted to do (she did not mean to pick up from where I
left off -- she just wanted to work on something different).
Then she would not be familiar enough with what 'j' and 'h'
tried to achieve, and I'd be forcing her to pick between the
two. Of course if she can make the right decision, then again
that is a perfect example of distributed collaboration, but that
does not change the fact that I'd be forcing her to clean up my
mess.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The default post-commit hook is actually empty; it is the update hook
that sends an email. This patch corrects hooks.txt to reflect that.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since it can be annoying to manually cleanup 40 tracking branches
which were removed by the remote system, 'git remote prune <n>'
can now be used to delete any tracking branches under <n> which
are no longer available on the remote system.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Those new messages are certainly nice, but there might be cases where
they are simply unwelcome, like when git-commit is used within scripts.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It does not seem to need it either and gives an error on FC5 I use
at kernel.org to cut documentation tarballs, so remove it in the
meantime.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is in the hope of giving JBF's user-manual wider exposure.
I am not very happy with trailing whitespaces in the new
document, but let's not worry too much about the formatting
issues for now, but concentrate more on the structure and the
contents.
I'd like complete gitweb setup instructions some day, but for now just
refer to the gitweb README.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Document Junio's show-branch trick for finding out which tags are
descendents of a given comit.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
I still really want a section on interoperability with CVS, subversion,
etc., but I'm not getting around to it very fast, so just add this to
the TODO section for now. And a few other minor todo updates.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Add a brief discussion of reflogs. Also recovery of dangling commits
seems to fit in here, so move some of the discussion out of Linus's
email to here.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Direct editing of config files may be more natural for users than using
the git-config commandline; but we should still reference the
git-config man page when we describe such editing, so people know where
to go for details on the config file syntax and meanings of the
variables.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Looks like we're going to allow git-config as the preferred alias to
git-repo-config, so let's document that instead.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Initial import of fsck and dangling objects discussion, mostly lifted from
an email from Linus.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Love it or hate it, some people actually still program in Tcl. Some
of those programs are meant for interfacing with Git. Programs such as
gitk and git-gui. It may be useful to have Tcl-safe output available
from for-each-ref, just like shell, Perl and Python already enjoy.
Thanks to Sergey Vlasov for pointing out the horrible flaws in the
first and second version of this patch, and steering me in the right
direction for Tcl value quoting.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* The description of valid colour specifications was rather
incomplete, so fix it so that it actually describes colour specs as
accepted by color_parse().
* The list of colour items allowed in color.diff.BLAH was missing the
`commit' and `whitespace' entries.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I did this:
$ git tag -s test-sign
gpg: skipped "Andy Parkins <andyparkins@gmail.com>": secret key not available
gpg: signing failed: secret key not available
failed to sign the tag with GPG.
The problem is that I have used the comment field in my key's UID
definition.
$ gpg --list-keys andy
pub 1024D/4F712F6D 2003-08-14
uid Andy Parkins (Google) <andyparkins@gmail.com>
So when git-tag looks for "Andy Parkins <andyparkins@gmail.com>";
obviously it's not going to be found.
There shouldn't be a requirement that I use the same form of my name in
my git repository and my gpg key - I might want to be formal (Andrew) in
my gpg key and informal (Andy) in the repository. Further I might have
multiple keys in my keyring, and might want to use one that doesn't
match up with the address I use in commit messages.
This patch adds a configuration entry "user.signingkey" which, if
present, will be passed to the "-u" switch for gpg, allowing the tag
signing key to be overridden. If the entry is not present, the fallback
is the original method, which means existing behaviour will continue
untouched.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Keep git remote discussion in the first chapter, but postpone
lower-level git fetch usage (to fetch individual branches) till later.
Import a bunch of slightly modified text from the readme to give an
architectural overview at the end.
Add more discussion of history rewriting.
And a bunch of other miscellaneous changes....
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Document the recommended way to prime a repository with tons of
references with 'pack-refs --all -prune'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This introduces the config item remote.<name>.uploadpack to override the
default value (which is "git-upload-pack").
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows transfer.unpackLimit to specify what these two
configuration variables want to set.
We would probably want to deprecate the two separate variables,
as I do not see much point in specifying them independently.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes git-fetch over git native protocol to automatically
decide to keep the downloaded pack if the fetch results in more
than 100 objects, just like receive-pack invoked by git-push
does. This logic is disabled when --keep is explicitly given
from the command line, so that a very small clone still keeps
the downloaded pack as before.
The 100 threshold can be adjusted with fetch.unpacklimit
configuration. We might want to introduce transfer.unpacklimit
to consolidate the two unpacklimit variables, which will be a
topic for the next patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just some option name disambiguation. This is the counter part to
commit d23842fd which made a similar change for push and send-pack.
--exec continues to work.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used to get the following confusing error message:
$ git commit --amend -a -m foo
Option -m cannot be combined with -c/-C/-F
This is because --amend cannot be combined with -c/-C/-F, which makes
sense, because they try to handle the same log message in different ways.
So update the documentation to reflect this.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Contrary to variable values, in subsection names parsing character
escape codes (besides literal escaping of " as \", and \ as \\)
is not performed; subsection name cannot contain newlines.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A short-hand "-g" for "git log --walk-reflogs" and "git
show-branch --reflog" makes it easier to access the reflog
info.
[jc: added -g to show-branch for symmetry]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Separate part of Documentation/config.txt which deals with git config file
syntax into "Syntax" subsection, and expand it. Add information about
subsections, boolean values, escaping and escape sequences in string
values, and continuing variable value on the next line.
Add also proxy settings to config file example to show example of
partially enclosed in double quotes string value.
Parts based on comments by Junio C Hamano, Johannes Schindelin,
config.c, and the smb.conf(5) man page.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-prune is not safe when run uncontrolled in parallel while
other git operations are creating new objects. To avoid
mistakes, do not run git-prune by default from git-gc.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reverts commit 9b088c4e39.
Protecting 'mature' objects does not make it any safer. We should
admit that git-prune is inherently unsafe when run in parallel with
other operations without involving unwarranted locking overhead,
and with the latest git, even rebase and reset would not immediately
create crufts anyway.
Marco Candrian noticed that one cat-file example refers to a
blob object that is never used in the example sequence.
The bug is interesting in that the output from the botched
sample command is consistent with the incorrect blob object
name ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
It appears git-gc will no longer prune automatically, so we don't
need to tell people not to do other stuff while running it.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Since references may be packed, it's no longer as helpful to
introduce references as paths relative to .git.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
This option gives grace period to objects that are unreachable
from the refs from getting pruned.
The default value is 24 hours and may be changed using
gc.prunegrace.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the output so the list at the top shows the reflog
message, along with their relative timestamps.
You can use --reflog=<n> to show <n> most recent log entries, or
use --reflog=<n>,<b> to show <n> entries going back from the
entry <b>. <b> can be either a number (so --reflog=4,20 shows 4
records starting from @{20}) or a timestamp (e.g. --reflog='4,1 day').
Here is a sample output (with --list option):
$ git show-branch --reflog=10 --list jc/show-reflog
[jc/show-reflog@{0}] (3 minutes ago) commit (amend): show-branch --ref
[jc/show-reflog@{1}] (5 minutes ago) reset HEAD^
[jc/show-reflog@{2}] (14 minutes ago) commit: show-branch --reflog: sho
[jc/show-reflog@{3}] (14 minutes ago) commit: show-branch --reflog: sho
[jc/show-reflog@{4}] (18 minutes ago) commit (amend): Extend read_ref_a
[jc/show-reflog@{5}] (18 minutes ago) commit (amend): Extend read_ref_a
[jc/show-reflog@{6}] (18 minutes ago) commit (amend): Extend read_ref_a
[jc/show-reflog@{7}] (18 minutes ago) am: read_ref_at(): allow retrievi
[jc/show-reflog@{8}] (18 minutes ago) reset --hard HEAD~4
[jc/show-reflog@{9}] (61 minutes ago) commit: show-branch --reflog: use
This shows what I did more cleanly:
$ git show-branch --reflog=10 jc/show-reflog
! [jc/show-reflog@{0}] (3 minutes ago) commit (amend): show-branch --ref
! [jc/show-reflog@{1}] (5 minutes ago) reset HEAD^
! [jc/show-reflog@{2}] (14 minutes ago) commit: show-branch --reflog:
! [jc/show-reflog@{3}] (14 minutes ago) commit: show-branch --reflog:
! [jc/show-reflog@{4}] (18 minutes ago) commit (amend): Extend read_
! [jc/show-reflog@{5}] (18 minutes ago) commit (amend): Extend read
! [jc/show-reflog@{6}] (18 minutes ago) commit (amend): Extend rea
! [jc/show-reflog@{7}] (18 minutes ago) am: read_ref_at(): allow
! [jc/show-reflog@{8}] (18 minutes ago) reset --hard HEAD~4
! [jc/show-reflog@{9}] (61 minutes ago) commit: show-branch --r
----------
+ [jc/show-reflog@{0}] show-branch --reflog: show the reflog
+ [jc/show-reflog@{2}] show-branch --reflog: show the reflog
+++ [jc/show-reflog@{1}] show-branch --reflog: show the reflog
+++++ [jc/show-reflog@{4}] Extend read_ref_at() to be usable fro
+ [jc/show-reflog@{5}] Extend read_ref_at() to be usable fro
+ [jc/show-reflog@{6}] Extend read_ref_at() to be usable fro
+ [jc/show-reflog@{7}] read_ref_at(): allow retrieving the r
+ [jc/show-reflog@{9}] show-branch --reflog: use updated rea
+ [jc/show-reflog@{9}^] read_ref_at(): allow reporting the c
+ [jc/show-reflog@{9}~2] show-branch --reflog: show the refl
+ [jc/show-reflog@{9}~3] read_ref_at(): allow retrieving the
++++++++++ [jc/show-reflog@{8}] dwim_ref(): Separate name-to-ref DWIM
At @{9}, I had a commit to complete 5 patch series, but I wanted
to consolidate two commits that enhances read_ref_at() into one
(they were @{9}^ and @{9}~3), and another two that touch show-branch
into one (@{9} and @{9}~2).
I first saved them with "format-patch -4", and then did a reset
at @{8}. At @{7}, I applied one of them with "am", and then
used "git-apply" on the other one, and amended the commit at
@{6} (so @{6} and @{7} has the same parent). I did not like the
log message, so I amended again at @{5}.
Then I cherry-picked @{9}~2 to create @{3} (the log message
shows that it needs to learn to set GIT_REFLOG_ACTION -- it uses
"git-commit" and the log entry is attributed for it). Another
cherry-pick built @{2} out of @{9}, but what I wanted to do was
to squash these two into one, so I did a "reset HEAD^" at @{1}
and then made the final commit by amending what was at the top.
Signed-off-by: Junio C Hamano <junkio@cox.net>
For now it's just to get a more descriptive name. Later we might update the
push protocol to run more than one program on the other end. Moreover this
matches better the corresponding config option remote.<name>. receivepack.
--exec continues to work
Signed-off-by: Uwe Kleine-König <zeisberg@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Having to specify git push --exec=... is annoying if you cannot have
git-receivepack in your PATH on the remote side (or don't want to).
This introduces the config item remote.<name>.receivepack to override
the default value (which is "git-receive-pack").
Signed-off-by: Uwe Kleine-König <zeisberg@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
add all supported options to Documentation/git-....txt and the usage strings.
Signed-off-by: Uwe Kleine-König <zeisberg@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds two new classes (pure-helpers and "Interacting with
Others") to the command list in the main manual page. The
latter class is primarily about foreign SCM interface and is
placed before low-level (plumbing) commands.
Also it promotes a handful commands to mainporcelain category
while demoting some others.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the source of the list of commands and categorization
to the end of Documentation/cmd-list.perl, so that re-categorization
and re-ordering would become easier to manage.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Editors often give easier handling of patch files if the
filename ends with .patch, so use it instead of .txt.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This teaches "git-format-patch" to honor the --max-count
parameter revision traversal machinery takes, so that you can
say "git-format-patch -3" to process the three topmost commits
from the current HEAD (or "git-format-patch -2 topic" to name a
specific branch).
Signed-off-by: Junio C Hamano <junkio@cox.net>
The revision specification syntax (sometimes referred to as
SHA1-expressions) is accepted almost everywhere in Git by
almost every tool. Unfortunately it is only documented in
git-rev-parse.txt, and most users don't know to look there.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In ab2a1a32 Junio improved the reflog query logic to support
obtaining the n-th prior value of a ref, but this was never
documented in git-rev-parse. Now it is.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of keeping the confused end user reading low-level
documentation, suggest the higher level commands that implement
what the user may want to do using them upfront.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Current README content is way too esoteric for someone looking at GIT
for the first time. Instead it should provide a quick summary of what
GIT is with a few pointers to other resources.
The bulk of the previous README content is moved to
Documentation/core-intro.txt.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The default can also be changed with "format.suffix" configuration.
Leaving it empty would not add any suffix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add discussion section to git-checkout documentation and mention
detached HEAD in repository-layout document.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* Promiscous pull shows the distributed nature of git better.
* Add a new step after that to teach "remote add".
* Highlight that with the shorthand defined you will get
remote tracking branches for free.
* Fix Alice's workflow.
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The text is just copied from git-send-pack.txt.
Signed-off-by: Uwe Kleine-K,Av(Bnig <zeisberg@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead, we complain to the user and suggest that they explicitly
specify the remote and branch. We depend on the exit status of
git-symbolic-ref, so let's go ahead and document that.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we are on a detached HEAD, there is no current branch.
There is no reason to leak the error messages to the end user
since this is a situation we expect to see.
This adds -q option to git-symbolic-ref to exit without issuing
an error message if the given name is not a symbolic ref.
By the way, with or without this patch, there currently is no
good way to tell failure modes between "git symbolic-ref HAED"
and "git symbolic-ref HEAD". Both says "is not a symbolic ref".
We may want to do something about it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We've squelched output from merge-recursive, and git-merge when
used with recursive does not attempt the trivial one first
anymore, so there won't be "Trying ... Nope." messages now.
Signed-off-by: Junio C Hamano <junkio@cox.net>
My prior version of git-describe ran very slowly on even reasonably
sized projects like git.git and linux.git as it tended to identify
a large number of possible tags and then needed to generate the
revision list for each of those tags to sort them and select the
best tag to describe the input commit.
All we really need is the number of commits in the input revision
which are not in the tag. We can generate these counts during
the revision walking and tag matching loop by assigning a color to
each tag and coloring the commits as we walk them. This limits us
to identifying no more than 26 possible tags, as there is limited
space available within the flags field of struct commit.
The limitation of 26 possible tags is hopefully not going to be a
problem in real usage, as most projects won't create 26 maintenance
releases and merge them back into a development trunk after the
development trunk was tagged with a release candidate tag. If that
does occur git-describe will start to revert to its old behavior of
using the newer maintenance release tag to describe the development
trunk, rather than the development trunk's own tag. The suggested
workaround would be to retag the development trunk's tip.
However since even 26 possible tags can take a while to generate a
description for on some projects I'm defaulting the limit to 10 but
offering the user --candidates to increase the number of possible
matches if they need a more accurate result. I specifically chose
10 for the default as it seems unlikely projects will have more
than 10 maintenance releases merged into a development trunk before
retagging the development trunk, and it seems to perform about the
same on linux.git as v1.4.4.4 git-describe.
A large amount of debugging information was also added during
the development of this change, so I've left it in to be toggled
on with --debug. It may be useful to the end user to help them
understand why git-describe took one particular tag over another.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
1) talk about "git merge" instead of "git pull ."
2) suggest "git repo-config" instead of directly editing config files
3) echo "URL: blah" > .git/remotes/foo is obsolete and should be
"git repo-config remote.foo.url blah"
4) support for partial URL prefix has been removed (see commit
ea560e6d64) so drop mention of it.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We say "this shows only the most often used ones"; so instead of
teaching --max-number=<n> form, list -<n> form which is much
easier to type.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano <junkio@cox.net> writes:
>
> I think the output from merge-recursive can be categorized into 5
> verbosity levels:
>
> 1. "CONFLICT", "Rename", "Adding here instead due to D/F conflict"
> (outermost)
>
> 2. "Auto-merged successfully" (outermost)
>
> 3. The first "Merging X with Y".
>
> 4. outermost "Merging:\ntitle1\ntitle2".
>
> 5. outermost "found N common ancestors\nancestor1\nancestor2\n..."
> and anything from inner merge.
>
> I would prefer the default verbosity level to be 2 (that is, show
> both 1 and 2).
and this change makes it so. I think level 3 is probably pointless
as its only one line of output above level 2, but I can see how some
users may want to view it but not view the slightly more verbose
output of level 4.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Steven Grimm noticed that git-repack's verbosity is inconsistent
because pack-objects is chatty and prune-packed is not. This
makes the latter a bit more chatty and gives -q option to
squelch it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
While 'init-db' still is and probably will always remain a valid git
command for obvious backward compatibility reasons, it would be a good
idea to move shipped tools and docs to using 'init' instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Despite what the documentation claims, git-commit does not check commit
for suspicious lines: all hooks are disabled by default,
and the pre-comit hook could be changed to do something else.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Junio C Hamano <junkio@cox.net>
These days, the command does a lot more than just initialise the
object database (such as setting default config-variables,
installing template hooks...), and "git init" is actually a more
sensible name nowadays.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Correct command line examples of repo-config, format-patch and am.
A full object name is 40-hexdigit; it may be 20-byte but
20-digit is misleading.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Oops. Commit 515377ea9e missed one
file, git-init documentation.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that git-svn requires the SVN::* Perl library, the manpage doesn't need
to describe what happens when you don't have it.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since we are talking about allowing potentially incompatible UI
changes in v1.5.0 iff the change improves the general situation,
I would say why not.
There is --no-utf8 flag to avoid re-coding from botching the log
message just in case, but we may not even need it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes the earlier "wait for 10 minutes before importing" safety
overridable with "-a(ll)" flag, and adds necessary documentation.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also, document --{trunk,branches,tags} options while we're
documenting multi-init options.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Clarify definition of "reachable" (what chain?)
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add discussion of git-rebase, patch series, history rewriting.
Mention "pull ." as a synonym for "merge".
Remind myself of another case I want to cover in the other-vcs's chapter.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Add a brief description of the organization to the preface, expand the
final notes/todo's section, in hopes maybe some others will want to
contribute.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Make "init" the equivalent of "init-db". This should make first GIT
impression a little more friendly.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The goals are:
- Readable from beginning to end in order without having read
any other git documentation beforehand.
- Helpful section names and cross-references, so it's not too
hard to skip around some if you need to.
- Organized to allow it to grow much larger (unlike the
tutorials)
It's more liesurely than tutorial.txt, but tries to stay focused on
practical how-to stuff. It adds a discussion of how to resolve merge
conflicts, and partial instructions on setting up and dealing with a
public repository.
I've lifted a little bit from "branching and merging" (e.g., some of the
discussion of history diagrams), and could probably steal more if that's
OK. (Similarly anyone should of course feel free to reuse bits of this
if any parts seem more useful than the whole.)
There's a lot of detail on managing branches and using git-fetch, just
because those are essential even to people needing read-only access
(e.g., kernel testers). I think those sections will be much shorter
once the new "git remote" command and the disconnected checkouts are
taken into account.
I do feel bad about adding yet another piece of documentation, but I we
need something that goes through all the basics in a logical order, and
I wasn't seeing how to grow the tutorials into that.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
* sp/mmap: (27 commits)
Spell default packedgitlimit slightly differently
Increase packedGit{Limit,WindowSize} on 64 bit systems.
Update packedGit config option documentation.
mmap: set FD_CLOEXEC for file descriptors we keep open for mmap()
pack-objects: fix use of use_pack().
Fix random segfaults in pack-objects.
Cleanup read_cache_from error handling.
Replace mmap with xmmap, better handling MAP_FAILED.
Release pack windows before reporting out of memory.
Default core.packdGitWindowSize to 1 MiB if NO_MMAP.
Test suite for sliding window mmap implementation.
Create pack_report() as a debugging aid.
Support unmapping windows on 'temporary' packfiles.
Improve error message when packfile mmap fails.
Ensure core.packedGitWindowSize cannot be less than 2 pages.
Load core configuration in git-verify-pack.
Fully activate the sliding window pack access.
Unmap individual windows rather than entire files.
Document why header parsing won't exceed a window.
Loop over pack_windows when inflating/accessing data.
...
Conflicts:
cache.h
pack-check.c
