This is one step towards making strbuf.c not depend upon cache.h.
Additional steps will follow in subsequent commits.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -p" while the index is unmerged sometimes failed to parse
the diff output it internally produces and died, which has been
corrected.
* jk/add-p-unmerged-fix:
add-patch: handle "* Unmerged path" lines
When we generate a diff with --cached, unmerged entries have no oid for
their index entry:
$ git diff-index --abbrev --cached HEAD
:100644 000000 f719efd 0000000 U my-conflict
So when we are asked to produce a patch, since we only have one side, we
just emit a special message:
$ git diff-index --cached -p HEAD
* Unmerged path my-conflict
This confuses interactive-patch modes that look at cached diffs. For
example:
$ git reset -p
BUG: add-patch.c:498: diff starts with unexpected line:
* Unmerged path my-conflict
Making things even more confusing, you'll get that error only if the
unmerged entry is alphabetically the first changed file. Otherwise, we
simply stick the unrecognized line to the end of the previous hunk.
There it's mostly harmless, as it eventually gets fed back to "git
apply", which happily ignores it. But it's still shown to the user
attached to the hunk, which is wrong.
So let's handle these lines as a noop. There's not really anything
useful to do with a conflicted merge in this case, and that's what we do
for other cases like "add -p". There we get a "diff --cc" line, which we
accept as starting a new file, but we refuse to use any of its hunks
(their headers start with "@@@" and not "@@ ", so we silently ignore
them).
It seems like simply recognizing the line and continuing in our parsing
loop would work. But we actually need to run the rest of the loop body
to handle matching up our colored/filtered output. But that code assumes
that we have some active file_diff we're working on. So instead, we'll
just insert a dummy entry into our array. This ends up the same as if we
saw a "diff --cc" line (a file with no hunks).
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The discard_index() function has not returned non-zero since
7a51ed66f6 (Make on-disk index representation separate from in-core
one, 2008-01-14), but we've had various code in-tree still acting as
though that might be the case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cee6cb7300 (built-in add -p: implement the "worktree" patch modes,
2019-12-21) added the worktree patch modes to the built-in add -p.
Its commit message claims to be a port of 2f0896ec3a (restore:
support --patch, 2019-04-25), which did the same for the script
git-add--interactive.perl.
The script mentioned only the worktree in its prompt messages in
worktree mode, while the built-in mentions the worktree and also the
index, even though the command doesn't actually affect the index.
2c8bd8471a (checkout -p: handle new files correctly, 2020-05-27)
added new prompt messages for addition that also mention the index in
worktree mode in the built-in, but not in the script.
Correct these prompts to state that only the worktree will be affected.
Reported-by: David Plumpton <david.plumpton@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More fixes to "add -p"
* js/builtin-add-p-portability-fix:
t6132(NO_PERL): do not run the scripted `add -p`
t3701: test the built-in `add -i` regardless of NO_PERL
add -p: avoid ambiguous signed/unsigned comparison
Thanks to always running `diff-index` and `diff-files` with the
`--numstat` option (the latter with `--ignore-submodules=dirty`) before
even generating any real diff to parse, the Perl version of `git add -p`
simply ignored dirty submodules and does not even offer them up for
staging.
However, the built-in variant did not use that flag because it tries to
run only one `diff` command, skipping the unneeded
`diff-index`/`diff-files` invocation of the Perl variant and therefore
only faithfully recapitulates what the Perl code does once it _does_
generate and parse the real diff.
This causes a problem when running the built-in `add -p` with
`diff-so-fancy` because that diff colorizer always inserts an empty line
before the diff header to ensure that it produces 4 lines as expected by
`git add -p` (the equivalent of the non-colorized `diff`, `index`, `---`
and `+++` lines). But `git diff-files` does not produce any `index` line
for dirty submodules.
The underlying problem is not even the discrepancy in lines, but that
`git add -p` presents diffs for dirty submodules: there is nothing that
_can_ be staged for those.
Let's fix that bug, and teach the built-in `add -p` to ignore dirty
submodules, too. This _incidentally_ also fixes the `diff-so-fancy`
problem ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In
https://lore.kernel.org/git/ecf6f5be-22ca-299f-a8f1-bda38e5ca246@gmail.com,
Phillipe Blain reported that the built-in `git add -p` command fails
when asked to use [`diff-so-fancy`][diff-so-fancy] to colorize the diff.
The reason is that this tool produces colored diffs with a hunk header
that does not contain any parseable `@@ ... @@` line range information,
and therefore we cannot detect any part in that header that comes after
the line range.
As proposed by Phillip Wood, let's take that for a clear indicator that
we should show the hunk headers verbatim. This is what the Perl version
of the interactive `add` command did, too.
[diff-so-fancy]: https://github.com/so-fancy/diff-so-fancy
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com>
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing the colored version of a diff, the interactive `add`
command really relies on the colored version having the same number of
lines as the plain (uncolored) version. That is an invariant.
We already have code to verify correctly when the colored diff has less
lines than the plain diff. Modulo an off-by-one bug: If the last diff
line has no matching colored one, the code pretends to succeed, still.
To make matters worse, when we adjusted the test in 1e4ffc765d (t3701:
adjust difffilter test, 2020-01-14), we did not catch this because `add
-p` fails for a _different_ reason: it does not find any colored hunk
header that contains a parseable line range.
If we change the test case so that the line range _can_ be parsed, the
bug is exposed.
Let's address all of the above by
- fixing the off-by-one,
- adjusting the test case to allow `add -p` to parse the line range
- making the test case more stringent by verifying that the expected
error message is shown
Also adjust a misleading code comment about the now-fixed code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the interactive `add` operation, users can choose to jump to specific
hunks, and Git will present the hunk list in that case. To avoid showing
too many lines at once, only a maximum of 21 hunks are shown, skipping
the "mode change" pseudo hunk.
The comparison performed to skip the "mode change" pseudo hunk (if any)
compares a signed integer `i` to the unsigned value `mode_change` (which
can be 0 or 1 because it is a 1-bit type).
According to section 6.3.1.8 of the C99 standard (see e.g.
https://www.open-std.org/jtc1/sc22/WG14/www/docs/n1256.pdf), what should
happen is an automatic conversion of the "lesser" type to the "greater"
type, but since the types differ in signedness, it is ill-defined what
is the correct "usual arithmetic conversion".
Which means that Visual C's behavior can (and does) differ from GCC's:
When compiling Git using the latter, `add -p`'s `goto` command shows no
hunks by default because it casts a negative start offset to a pretty
large unsigned value, breaking the "goto hunk" test case in
`t3701-add-interactive.sh`.
Let's avoid that by converting the unsigned bit explicitly to a signed
integer.
Note: This is a long-standing bug in the Visual C build of Git, but it
has never been caught because t3701 is skipped when `NO_PERL` is set,
which is the case in the `vs-test` jobs of Git's CI runs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start following-up on the rename mentioned in c7c4bdeccf (run-command
API: remove "env" member, always use "env_array", 2021-11-25) of
"env_array" to "env".
The "env_array" name was picked in 19a583dc39 (run-command: add
env_array, an optional argv_array for env, 2014-10-19) because "env"
was taken. Let's not forever keep the oddity of "*_array" for this
"struct strvec", but not for its "args" sibling.
This commit is almost entirely made with a coccinelle rule[1]. The
only manual change here is in run-command.h to rename the struct
member itself and to change "env_array" to "env" in the
CHILD_PROCESS_INIT initializer.
The rest of this is all a result of applying [1]:
* make contrib/coccinelle/run_command.cocci.patch
* patch -p1 <contrib/coccinelle/run_command.cocci.patch
* git add -u
1. cat contrib/coccinelle/run_command.pending.cocci
@@
struct child_process E;
@@
- E.env_array
+ E.env
@@
struct child_process *E;
@@
- E->env_array
+ E->env
I've avoided changing any comments and derived variable names here,
that will all be done in the next commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -p" rewritten in C regressed hunk splitting in some cases,
which has been corrected.
* pw/add-p-hunk-split-fix:
builtin add -p: fix hunk splitting
t3701: clean up hunk splitting tests
The C reimplementation of "add -p" fails to split the last hunk in a
file if hunk ends with an addition or deletion without any post context
line unless it is the last file to be processed.
To determine whether a hunk can be split a counter is incremented each
time a context line follows an insertion or deletion. If at the end of
the hunk the value of this counter is greater than one then the hunk
can be split into that number of smaller hunks. If the last hunk in a
file ends with an insertion or deletion then there is no following
context line and the counter will not be incremented. This case is
already handled at the end of the loop where counter is incremented if
the last hunk ended with an insertion or deletion. Unfortunately there
is no similar check between files (likely because the perl version
only ever parses one diff at a time). Fix this by checking if the last
hunk ended with an insertion or deletion when we see the diff header
of a new file and extend the existing regression test.
Reproted-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrate those run-command API users that assign directly to the "argv"
member to use a strvec_pushv() of "args" instead.
In these cases it did not make sense to further refactor these
callers, e.g. daemon.c could be made to construct the arguments closer
to handle(), but that would require moving the construction from its
cmd_main() and pass "argv" through two intermediate functions.
It would be possible for a change like this to introduce a regression
if we were doing:
cp.argv = argv;
argv[1] = "foo";
And changed the code, as is being done here, to:
strvec_pushv(&cp.args, argv);
argv[1] = "foo";
But as viewing this change with the "-W" flag reveals none of these
functions modify variable that's being pushed afterwards in a way that
would introduce such a logic error.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing __attribute__((format)) function attributes to various
"static" functions that take printf arguments.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -i" failed to honor custom colors configured to show
patches, which has been corrected.
* js/add-i-color-fix:
add -i: verify in the tests that colors can be overridden
add -p: prefer color.diff.context over color.diff.plain
add -i (Perl version): color header to match the C version
add -i (built-in): use the same indentation as the Perl version
add -p (built-in): do not color the progress indicator separately
add -i (built-in): use correct names to load color.diff.* config
add -i (built-in): prevent the `reset` "color" from being configured
add -i: use `reset_color` consistently
add -p (built-in): imitate `xdl_format_hunk_hdr()` generating hunk headers
add -i (built-in): send error messages to stderr
add -i (built-in): do show an error message for incorrect inputs
The Perl version of this command colors the progress indicator and the
prompt message in one go.
Let's do the same in the built-in version so that the same upcoming test
(which will compare the output of `git add -p` against a known-good
version) will pass both for the Perl version as well as for the built-in
version.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already maintain a list of colors in the `add_i_state`, therefore we
should use them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In libxdiff, imitating GNU diff, the hunk headers only show the line
count if it is different from 1. When splitting hunks, the Perl version
of `git add -p` already imitates this. Let's do the same in the built-in
version of said command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout -p A...B [-- <path>]" did not work, even though the
same command without "-p" correctly used the merge-base between
commits A and B.
* dl/checkout-p-merge-base:
t2016: add a NEEDSWORK about the PERL prerequisite
add-patch: add NEEDSWORK about comparing commits
Doc: document "A...B" form for <tree-ish> in checkout and switch
builtin/checkout: fix `git checkout -p HEAD...` bug
The two versions of add-patch has special-casing for the literal
revision "HEAD". However, we want to handle other ways of saying "HEAD"
in the same way.[0] Add a NEEDSWORK to the add-patch code that does this
so that it can be addressed later.
[0]: https://lore.kernel.org/git/xmqqsgat7ttf.fsf@gitster.c.googlers.com/
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A popular way of partially staging a new file is to run `git add -N
<path>` and then use the hunk editing of `git add -p` to select the
part of the file that the user wishes to stage. Since
85953a3187 ("diff-files --raw: show correct post-image of
intent-to-add files", 2020-07-01) this has stopped working as
intent-to-add paths are now show as new files rather than changes to
an empty blob and `git apply` refused to apply a creation patch for a
path that was marked as intent-to-add. 7cfde3fa0f ("apply: allow "new
file" patches on i-t-a entries", 2020-08-06) fixed the problem with
apply but it still wasn't possible to edit the added hunk properly.
2c8bd8471a ("checkout -p: handle new files correctly", 2020-05-27)
had previously changed `add -p` to handle new files but it did not
implement patch editing correctly. The perl version simply forbade
editing and the C version opened the editor with the full diff rather
that just the hunk which meant that the user had to edit the hunk
header manually to get it to work.
The root cause of the problem is that added files store the diff header
with the hunk data rather than separating the two as we do for other
changes. Changing added files to store the diff header separately
fixes the editing problem at the expense of having to special case
empty additions as they no longer have any hunks associated with them,
only the diff header.
The changes move some existing code into a conditional changing the
indentation, they are best viewed with
--color-moved-ws=allow-indentation-change (or --ignore-space-change
works well to get an overview of the changes)
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reported-by: Thomas Sullivan <tom@msbit.com.au>
Reported-by: Yuchen Ying <ych@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
asan reports that the C version of `add -p` is not freeing all the
memory it allocates. Fix this by introducing a function to clear
`struct add_p_state` and use it instead of freeing individual members.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After applying hunks to a file with "add -p", the C patch_update_file()
function tries to refresh the index (just like the perl version does).
We can only refresh the index if we're able to read it in, so we first
check the return value of repo_read_index(). But unlike many functions,
where "0" is success, that function is documented to return the number
of entries in the index. Hence we should be checking for success with a
non-negative return value.
Neither the tests nor any users seem to have noticed this, probably due
to a combination of:
- this affects only the C version, which is not yet the default
- following it up with any porcelain command like "git diff" or "git
commit" would refresh the index automatically.
But you can see the problem by running the plumbing "git diff-files"
immediately after "add -p" stages all hunks. Running the new test with
GIT_TEST_ADD_I_USE_BUILTIN=1 fails without the matching code change.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a file has been deleted the C version of add -p allows the user
to edit a hunk even though 'e' is not in the list of allowed
responses. (I think 'e' is disallowed because if the file is edited it
is no longer a deletion and we're not set up to rewrite the diff
header).
The invalid response was allowed because the test that determines
whether to display 'e' was not duplicated correctly in the code that
processes the user's choice. Fix this by using flags that are set when
constructing the prompt and checked when processing the user's choice
rather than repeating the check itself.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the code slightly, especially the third case where
hunk_nr was incremented a few lines before ALLOC_GROW().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The argv_array API is useful for not just managing argv but any
"vector" (NULL-terminated array) of strings, and has seen adoption
to a certain degree. It has been renamed to "strvec" to reduce the
barrier to adoption.
* jk/strvec:
strvec: rename struct fields
strvec: drop argv_array compatibility layer
strvec: update documention to avoid argv_array
strvec: fix indentation in renamed calls
strvec: convert remaining callers away from argv_array name
strvec: convert more callers away from argv_array name
strvec: convert builtin/ callers away from argv_array name
quote: rename sq_dequote_to_argv_array to mention strvec
strvec: rename files from argv-array to strvec
argv-array: rename to strvec
argv-array: use size_t for count and alloc
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit fixes a couple of minor spelling mistakes inside
comments.
Signed-off-by: Steve Kemp <steve@steve.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts remaining files from the first half of the alphabet,
to keep the diff to a manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add '[abcdefghjkl]*'".
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original patch selection code was written for `git add -p`, and the
fundamental unit on which it works is a hunk.
We hacked around that to handle deletions back in 24ab81ae4d
(add-interactive: handle deletion of empty files, 2009-10-27). But `git
add -p` would never see a new file, since we only consider the set of
tracked files in the index.
However, since the same machinery was used for `git checkout -p` &
friends, we can see new files.
Handle this case specifically, adding a new prompt for it that is
modeled after the `deleted file` case.
This also fixes the problem where added _empty_ files could not be
staged via `git checkout -p`.
Reported-by: Merlin Büge <toni@bluenox07.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are quite a few code locations (e.g. `git clean --interactive`)
where Git asks the user for an answer. In preparation for fixing a bug
shared by all of them, and also to DRY up the code, let's refactor it.
Please note that most of these callers trimmed white-space both at the
beginning and at the end of the answer, instead of trimming only the
end (as the caller in `add-patch.c` does).
Therefore, technically speaking, we change behavior in this patch. At
the same time, it can be argued that this is actually a bug fix.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Perl version of `git add -p` supports this config setting to allow
users to input commands via single characters (as opposed to having to
press the <Enter> key afterwards).
This is an opt-in feature because it requires Perl packages
(Term::ReadKey and Term::Cap, where it tries to handle an absence of the
latter package gracefully) to work. Note that at least on Ubuntu, that
Perl package is not installed by default (it needs to be installed via
`sudo apt-get install libterm-readkey-perl`), so this feature is
probably not used a whole lot.
In C, we obviously do not have these packages available, but we just
introduced `read_single_keystroke()` that is similar to what
Term::ReadKey provides, and we use that here.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Perl version of `git add -p` reads the config setting
`diff.algorithm` and if set, uses it to generate the diff using the
specified algorithm.
This patch ports that functionality to the C version.
Note: just like `git-add--interactive.perl`, we do _not_ respect this
config setting in `git add -i`'s `diff` command, but _only_ in the
`patch` command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Perl version supports post-processing the colored diff (that is
generated in addition to the uncolored diff, intended to offer a
prettier user experience) by a command configured via that config
setting, and now the built-in version does that, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a straight-forward port of 2f0896ec3a (restore: support
--patch, 2019-04-25) which added support for `git restore -p`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches the built-in `git add -p` machinery all the tricks it
needs to know in order to act as the work horse for `git checkout -p`.
Apart from the minor changes (slightly reworded messages, different
`diff` and `apply --check` invocations), it requires a new function to
actually apply the changes, as `git checkout -p` is a bit special in
that respect: when the desired changes do not apply to the index, but
apply to the work tree, Git does not fail straight away, but asks the
user whether to apply the changes to the worktree at least.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git stash` and `git reset` commands support a `--patch` option, and
both simply hand off to `git add -p` to perform that work. Let's teach
the built-in version of that command to be able to perform that work, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Perl script backing `git add -p` is used not only for that command,
but also for `git stash -p`, `git reset -p` and `git checkout -p`.
In preparation for teaching the C version of `git add -p` to support
also the latter commands, let's abstract away what is "stage" specific
into a dedicated data structure describing the differences between the
patch modes.
Finally, please note that the Perl version tries to make sure that the
diffs are only generated for the modified files. This is not actually
necessary, as the calls to Git's diff machinery already perform that
work, and perform it well. This makes it unnecessary to port the
`FILTER` field of the `%patch_modes` struct, as well as the
`get_diff_reference()` function.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch will make `git add -p` show "No changes." or "Only binary
files changed." in that case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
