--no-follow-parent disables and reverts it back to the old
default behavior of not following parents (if you don't care for
full history).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We can have a branch that was deleted, then re-added under the
same name but copied from another path, in which case we'll have
multiple parents (we don't want to break the original ref, nor
lose copypath info).
Add a test for this, too, of course.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
It can be confusing and redundant, since historically the
default remote ref (not remote itself) has been "git-svn", too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Having 'fetch' entries in the config file created from
--follow-parent is wasteful because it can cause *future* of
invocations to follow revisions we were never interested in
in the first place.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We no longer delete the top-level directory even if it got
deleted from the upstream repository. In gs_do_update; we
double-check that the path we're tracking exists at both
endpoints before proceeding. We have also added additional
protection against fetching revisions out-of-order.
To simplify our internal interfaces, I've disabled passing the
'recursive' flag to the gs_do_{switch,update} wrapper functions
since we always want it in git-svn. We also pass the
entire Git::SVN object rather than just the path because it
helped me debug.
When printing progress, the refname is printed out to make
it less confusing when multi-fetch is running.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We were still skipping path information from get_log if we are
tracking /r9270/drunk/subversion/bindings/..., but got something
like this in the log:
A /r9270/drunk (from /r9270/trunk:14)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Using path names as refnames breaks horribly if a user is
tracking one large, toplevel directory, and a lower-level
directory is followed from another project is a parent
of another ref, as it will cause refnames such as:
'refs/remotes/trunk/path/to/stuff', which will conflict
with a refname of 'refs/remotes/trunk'.
Now we just append @$revno to the end of it the current
refname. And if we have followed back to a grandparent, then
we'll strip any existing '@$parent_revno' strings before
appending our own '@$revno' string to it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The do_update or do_switch functions in SVN only allow for a
single path component; so 'path/to/deep/dir' would be
interpreted as 'path'.
SVN 1.4.x has a reparent function that can let us change the
session to use a higher-level root of the repository, so we can
use that for do_switch (which still doesn't seem to work in SVN
1.4.3 (a fix was attempted, but they missed the rest of the
typemap changes needed in trunk...)).
On the do_update side, we can use set_path on higher level
directories and set them to a newer revision so they don't get
updated. We can't do this with do_switch, either, because the
relative path we're tracking can change (directory moving into
a child of itself).
Because of these changes, we need to double check that our Fetch
editor is correctly performing stripping on any prefixed paths
from update, otherwise we'll just die() because that would be
a bug.
Added a test case which helped me notice and fix problems with
do_switch, too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
I broke this part with the URL minimization; since
git-svn will now try to connect to the root of
the repository and will end up writing files
there if it can...
Signed-off-by: Eric Wong <normalperson@yhbt.net>
svn_log_changed_path_t structs were being used out of scope
outside of svn_ra_get_log (because I wanted to eventually be
able to use git-svn with only a single connection to the
repository). So now we dup them into a hash.
This was fixed while making --follow-parent fetches more
efficient. I've moved parsing of the command-line --revision
argument outside of the Git::SVN module so Git::SVN::fetch() can
be used in more places (such as find_parent_branch).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
git-svn has never been able to handle deleted branches very well
because svn_ra_get_log() is all-or-nothing, meaning that if the
max revision passed to it does not contain the path we're
tracking, we miss all the revisions in the repository.
Branches fetched using --follow-parent still do this
sub-optimally (will be fixed soon). --follow-parent will soon
become the default, so we will assume that when using get_log();
We will also avoid tracking revprops for revisions with no
path-related changes since otherwise we just end up pulling
logs to paths we don't care about.
Also added a test for this to t9104-git-svn-follow-parent.sh and
correctly commit the log message in the preceeding test (which
conflicted with a filename).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
They simply aren't interesting to track, and this will allow
us to avoid get_log().
Since r0 is covered by this, we need to update the tests to not
rely on r0 (which is always empty).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This means that tracking the path of:
/another-larger/trunk/thunk/bump/thud inside a repository
would follow:
/larger-parent/trunk/thunk/bump/thud
even if the svn log output looks like this:
--------------------------------------------
Changed paths:
A /another-larger (from /larger-parent:5)
--------------------------------------------
Note: the usage of get_log() in git-svn still makes a
an assumption that shouldn't be made with regard to
revisions existing for a particular path.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This allows connections to be used more efficiently and not require
users to run 'git-svn migrate --minimize' for new repositories.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Having multiple fetch refspecs pointing to the same local ref
would be a very bad thing. Start avoiding the use of fatal() or
exit() inside the modules so we can libify more easily.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Bugs fixed:
* We didn't allow manually (not using git-svn) init-ed
remotes/fetch refspecs to be used before. It works now
because that's what I did in this test. git-svn init should
offer more control in the future.
* correctly strip paths in the delta editor when using
do_switch().
* Make the -i / GIT_SVN_ID option work correctly when doing
fetch on a multi-ref svn-remote
Signed-off-by: Eric Wong <normalperson@yhbt.net>
--minimize will update the git-svn configuration to attempt to
connect to the repository root (instead of directly to the
path(s) we are tracking) in order to allow more efficient reuse
of connections (for multi-fetch and follow-parent).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Of course, we handle metadata migrations from previous versions
and we have added unit tests.
The new .git/config remotes resemble non-SVN remotes. Below
is an example with comments:
[svn-remote "git-svn"]
; like non-svn remotes, we have one URL per-remote
url = http://foo.bar.org/svn
; 'fetch' keys are done in the same way as non-svn
; remotes, too. With the left-hand-side of the ':'
; being the remote (SVN) repository path relative to the
; above 'url' key; and the right-hand-side being a
; remote ref in git (refs/remotes/*).
; An empty left-hand-side means that it will fetch
; the entire contents of the 'url' key.
; old-style (migrated from previous versions of git-svn)
; are like this:
fetch = :refs/remotes/git-svn
; this is created by a current version of git-svn
; using the multi-init command with an explicit
; url (specified above). This allows multi-init
; to reuse SVN::Ra connections.
fetch = trunk:refs/remotes/trunk
fetch = branches/a:refs/remotes/a
fetch = branches/b:refs/remotes/b
fetch = tags/0.1:refs/remotes/tags/0.1
fetch = tags/0.2:refs/remotes/tags/0.2
fetch = tags/0.3:refs/remotes/tags/0.3
[svn-remote "alt"]
; this is another old-style remote migrated over
; to the new config format
url = http://foo.bar.org/alt
fetch = :refs/remotes/alt
Signed-off-by: Eric Wong <normalperson@yhbt.net>
It's becoming a maintenance burden. I've never found it
particularly useful myself, nor have I heard much feedback about
it; so I'm assuming it's just as useless to everyone else.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
If a user specified a seperate URL and --tags/--branches as
a sepearte URL, allow the Ra object (and therefore the connection)
to be reused.
We'll get rid of libsvn_ls_fullurl() since it was only used
in one place.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* lt/crlf:
Teach core.autocrlf to 'git apply'
t0020: add test for auto-crlf
Make AutoCRLF ternary variable.
Lazy man's auto-CRLF
* jc/apply-config:
t4119: test autocomputing -p<n> for traditional diff input.
git-apply: guess correct -p<n> value for non-git patches.
git-apply: notice "diff --git" patch again
Fix botched "leak fix"
t4119: add test for traditional patch and different p_value
apply: fix memory leak in prefix_one()
git-apply: require -p<n> when working in a subdirectory.
git-apply: do not lose cwd when run from a subdirectory.
Teach 'git apply' to look at $HOME/.gitconfig even outside of a repository
Teach 'git apply' to look at $GIT_DIR/config
This enhances the third point in the previous commit. When
applying a non-git patch that begins like this:
--- 2.6.orig/mm/slab.c
+++ 2.6/mm/slab.c
@@ -N,M +L,K @@@
...
and if you are in 'mm' subdirectory, we notice that -p2 is the
right option to use to apply the patch in file slab.c in the
current directory (i.e. mm/slab.c)
The guess function also knows about this pattern, where you
would need to use -p0 if applying from the top-level:
--- mm/slab.c
+++ mm/slab.c
@@ -N,M +L,K @@@
...
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier one that tried to be too consistent with GNU patch by
not stripping the leading path when we _know_ we are in a
subdirectory and the patch is relative to the toplevel was a
mistake. This fixes it.
- No change to behaviour when it is run from the toplevel of
the repository.
- When run from a subdirectory to apply a git-generated patch,
it uses the right -p<n> value automatically, with or without
--index nor --cached option.
- When run from a subdirectory to apply a randomly generated
patch, it wants the right -p<n> value to be given by the
user.
The second one is a pure improvement to correct inconsistency
between --index and non --index case, compared with 1.5.0. The
third point could be further improved to guess what the right
value for -p<n> should be by looking at the patch, but should be
a topic of a separate patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-apply running inside a subdirectory, with or without --index,
used to always assume that the patch is formatted in such a way
to apply with -p1 from the toplevel, but it is more useful and
consistent with the use of "GNU patch -p1" if it defaulted to
assume that its input is meant to apply at the level it is
invoked in.
This changes the behaviour. It used to be that the patch
generated this way would apply without any trick:
edit Documentation/Makefile
git diff >patch.file
cd Documentation
git apply ../patch.file
You need to give an explicit -p2 to git-apply now. On the other
hand, if you got a patch from somebody else who did not follow
"patch is to apply from the top with -p1" convention, the input
patch would start with:
diff -u Makefile.old Makefile
--- Makefile.old
+++ Makefile
and in such a case, you can apply it with:
git apply -p0 patch.file
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Update draft release notes for 1.5.0.1
Convert update-index references in docs to add.
Attempt to improve git-rebase lead-in description.
Do not take mode bits from index after type change.
git-blame: prevent argument parsing segfault
Make gitk save and restore window pane position on Linux and Cygwin.
Make gitk save and restore the user set window position.
[PATCH] gitk: Use show-ref instead of ls-remote
[PATCH] Make gitk work reasonably well on Cygwin.
[PATCH] gitk - remove trailing whitespace from a few lines.
Change git repo-config to git config
This teaches git-apply that the data read from and written to
the filesystem might need to get converted to adjust for local
line-ending convention.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When neither --index nor --cached was used, git-apply did not
try calling setup_git_directory(), which means it did not look
at configuration files at all. This fixes it to call the setup
function but still allow the command to be run in a directory
not controlled by git.
The bug probably meant that 'git apply', not moving up to the
toplevel, did not apply properly formatted diffs from the
toplevel when you are inside a subdirectory, even though 'git
apply --index' would. As a side effect, this patch fixes it as
well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we do not trust executable bit from lstat(2), we copied
existing ce_mode bits without checking if the filesystem object
is a regular file (which is the only thing we apply the "trust
executable bit" business) nor if the blob in the index is a
regular file (otherwise, we should do the same as registering a
new regular file, which is to default non-executable).
Noticed by Johannes Sixt.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This tests lowlevel of update/checkout codepaths and some patch
application. Currently, variants of "git apply" that look at
the working tree files does not work, so it does not test the
patch application without parameter and with --index parameter
when autocrlf is set to produce CRLF files.
We should add test for diff generation too.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some of the git-svn tests can fail on fast machines due to a race in
Subversion: if a file is modified in the same second it was checked out
(or in for that matter), Subversion will not consider it modified. This
works around the problem by increasing the timestamp by one second
before each commit.
[jc: with "touch -r -d" replacement from Eric]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It was suggested on the mailing list that being able to use `from`
in any commit to reset the current branch is useful in some types of
importers, such as a darcs importer.
We originally did not permit resetting an existing branch with a
new `from` command during a `commit` command, but this restriction
was only to help debug the hacked up cvs2svn that Jon Smirl was
developing in parallel with git-fast-import. It is probably more
of a problem to disallow it than to allow it. So now we permit a
`from` during any `commit`.
While making the changes required to permit multiple `from`
commands on the same branch, I discovered we no longer needed the
last_commit field to be set to 0 during a reset, so that was removed.
(Reset was originally setting the field to 0 to signal cmd_from()
that it was OK to execute on the branch.)
While poking around in this section of fast-import I also realized
the `reset` command was not working as intended if the corresponding
`from` command was omitted (as allowed by the BNF grammar and the
code). If `from` was omitted we cleared out the tree but we left
the tree SHA-1 and parent commit SHA-1 intact. This is not what
the user intended in this case. Instead they would be trying to
reset the branch to have no parent and to have no tree, making the
branch look new-born during the next commit. We now clear these
SHA-1 values during `reset`, ensuring the branch looks new-born if
`from` does not get supplied.
New test cases for these were also added.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* 'master' of git://repo.or.cz/git/fastimport:
bash: Hide git-fast-import.
fast-import: Add tip about importing renames.
fast-import: Hide the pack boundary commits by default.
Most users don't need the pack boundary information that fast-import
was printing to standard output, especially if they were calling
it with --quiet.
Those users who do want this information probably want it captured
so they can go back and use it to repack the imported repository.
So dumping the boundary commits to a log file makes more sense then
printing them to standard output.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Quite nonstandard "date -d @11111111 +%s" does not even fail on
OpenBSD but gives the current date in "seconds since epoch"
format, which is useless for the purpose of this test. We want
to make sure that this returns exactly the same input before
proceeding.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'master' of git://repo.or.cz/git/fastimport:
Add a Tips and Tricks section to fast-import's manual.
Don't crash fast-import if the marks cannot be exported.
Dump all refs and marks during a checkpoint in fast-import.
Teach fast-import how to sit quietly in the corner.
Teach fast-import how to clear the internal branch content.
Minor timestamp related documentation corrections for fast-import.
Use sed instead, it comes with cygwin and there is almost no chance of
someone installing a sed with default CRLF lineendings by accident.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some frontends may not be able to (easily) keep track of which files
are included in the branch, and which aren't. Performing this
tracking can be tedious and error prone for the frontend to do,
especially if its foreign data source cannot supply the changed
path list on a per-commit basis.
fast-import now allows a frontend to request that a branch's tree
be wiped clean (reset to the empty tree) at the start of a commit,
allowing the frontend to feed in all paths which belong on the branch.
This is ideal for a tar-file importer frontend, for example, as
the frontend just needs to reformat the tar data stream into a gfi
data stream, which may be something a few Perl regexps can take
care of. :)
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* 'master' of git://repo.or.cz/git/fastimport: (81 commits)
S_IFLNK != 0140000
Don't do non-fastforward updates in fast-import.
Support RFC 2822 date parsing in fast-import.
Minor fast-import documentation corrections.
Remove unnecessary null pointer checks in fast-import.
Correct fast-import timezone documentation.
Correct minor style issue in fast-import.
Correct compiler warnings in fast-import.
Remove --branch-log from fast-import.
Initial draft of fast-import documentation.
Don't support shell-quoted refnames in fast-import.
Reduce memory usage of fast-import.
Include checkpoint command in the BNF.
Accept 'inline' file data in fast-import commit structure.
Reduce value duplication in t9300-fast-import.
Create test case for fast-import.
Support delimited data regions in fast-import.
Remove unnecessary options from fast-import.
Use fixed-size integers when writing out the index in fast-import.
Always use struct pack_header for pack header in fast-import.
...
If fast-import is being used to update an existing branch of
a repository, the user may not want to lose commits if another
process updates the same ref at the same time. For example, the
user might be using fast-import to make just one or two commits
against a live branch.
We now perform a fast-forward check during the ref updating process.
If updating a branch would cause commits in that branch to be lost,
we skip over it and display the new SHA1 to standard error.
This new default behavior can be overridden with `--force`, like
git-push and git-fetch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
