One long-standing flaw in the pack transfer protocol used by "git
clone" was that there was no way to tell the other end which branch
"HEAD" points at, and the receiving end needed to guess. A new
capability has been defined in the pack protocol to convey this
information so that cloning from a repository with more than one
branches pointing at the same commit where the HEAD is at now
reliably sets the initial branch in the resulting repository.
* jc/upload-pack-send-symref:
t5570: Update for clone-progress-to-stderr branch
t5570: Update for symref capability
clone: test the new HEAD detection logic
connect: annotate refs with their symref information in get_remote_head()
connect.c: make parse_feature_value() static
upload-pack: send non-HEAD symbolic refs
upload-pack: send symbolic ref information as capability
upload-pack.c: do not pass confusing cb_data to mark_our_ref()
t5505: fix "set-head --auto with ambiguous HEAD" test
* jk/clone-progress-to-stderr:
clone: always set transport options
clone: treat "checking connectivity" like other progress
clone: send diagnostic messages to stderr
Some progress and diagnostic messages from "git clone" were
incorrectly sent to the standard output stream, not to the standard
error stream.
* jk/clone-progress-to-stderr:
clone: always set transport options
clone: treat "checking connectivity" like other progress
clone: send diagnostic messages to stderr
commit 6000334 (clone: allow cloning local paths with colons in them -
2013-05-04) made it possible to specify a path that has colons in it
without file://, e.g. ../foo:bar/somewhere. But the check was a bit
sloppy.
Consider the url '[foo]:bar'. The '[]' unwrapping code will turn the
string to 'foo\0:bar'. In effect this new string is the same as
'foo/:bar' in the check "path < strchrnul(host, '/')", which mistakes
it for a local path (with '/' before the first ':') when it's actually
not.
So disable the check for '/' before ':' when the URL has been mangled
by '[]' unwrapping.
[jn: with tests from Jeff King]
Noticed-by: Morten Stenshorne <mstensho@opera.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Putting messages like "Cloning into.." and "done" on stdout
is un-Unix and uselessly clutters the stdout channel. Send
them to stderr.
We have to tweak two tests to accommodate this:
1. t5601 checks for doubled output due to forking, and
doesn't actually care where the output goes; adjust it
to check stderr.
2. t5702 is trying to test whether progress output was
sent to stderr, but naively does so by checking
whether stderr produced any output. Instead, have it
look for "%", a token found in progress output but not
elsewhere (and which lets us avoid hard-coding the
progress text in the test).
This should not regress any scripts that try to parse the
current output, as the output is already internationalized
and therefore unstable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually "foo:bar" is interpreted as an ssh url. This patch allows to
clone from such paths by putting at least one slash before the colon
(i.e. /path/to/foo:bar or just ./foo:bar).
file://foo:bar should also work, but local optimizations are off in
that case, which may be unwanted. While at there, warn the users about
--local being ignored in this case.
Reported-by: William Giokas <1007380@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because a tag ref cannot be put to HEAD, HEAD will become detached.
This is consistent with "git checkout <tag>".
This is mostly useful in shallow clone, where it allows you to clone a
tag in addtion to branches.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we don't write, HEAD is still at refs/heads/master as initialized
by init-db, which may or may not match remote's HEAD.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for two subtly different cases: 'git fetch path/.git'
and 'git fetch path' to confirm that transport recognizes both
paths as git repositories when using the gitfile mechanism.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cloning from a local repository blindly copies or hardlinks all the files
under objects/ hierarchy. This results in two issues:
- If the repository cloned has an "objects/info/alternates" file, and the
command line of clone specifies --reference, the ones specified on the
command line get overwritten by the copy from the original repository.
- An entry in a "objects/info/alternates" file can specify the object
stores it borrows objects from as a path relative to the "objects/"
directory. When cloning a repository with such an alternates file, if
the new repository is not sitting next to the original repository, such
relative paths needs to be adjusted so that they can be used in the new
repository.
This updates add_to_alternates_file() to take the path to the alternate
object store, including the "/objects" part at the end (earlier, it was
taking the path to $GIT_DIR and was adding "/objects" itself), as it is
technically possible to specify in objects/info/alternates file the path
of a directory whose name does not end with "/objects".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a test to expose a long-standing bug that is triggered when
cloning with --reference option from a local repository that has its own
alternates. The alternate object stores specified on the command line
are lost, and only alternates copied from the source repository remain.
The bug will be fixed in the next patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the init-db messages that were added in v1.7.5-rc1~16^2 (init,
clone: support --separate-git-dir for .git file) by Nguyễn Thái Ngọc
Duy for translation.
This requires splitting up the tests that the patch added so that
certain parts of them can be skipped unless the C_LOCALE_OUTPUT
prerequisite is satisfied.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--separate-git-dir tells git to create git dir at the specified
location, instead of where it is supposed to be. A .git file that
points to that location will be put in place so that it appears normal
to repo discovery process.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that test-lib sets $HOME to protect against pollution from user
settings, GIT_CONFIG_NOGLOBAL is not needed for use by the test
suite any more. And as luck would have it, a quick code search
reveals no other users in the wild.
This patch does not affect GIT_CONFIG_NOSYSTEM, which is still
needed.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/test-2: (51 commits)
tests: factor HOME=$(pwd) in test-lib.sh
test-lib: use subshell instead of cd $new && .. && cd $old
tests: simplify "missing PREREQ" message
t/t0000-basic.sh: Run the passing TODO test inside its own test-lib
test-lib: Allow overriding of TEST_DIRECTORY
test-lib: Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY"/../
test-lib: Use $TEST_DIRECTORY or $GIT_BUILD_DIR instead of $(pwd) and ../
test: Introduce $GIT_BUILD_DIR
cvs tests: do not touch test CVS repositories shipped with source
t/t9602-cvsimport-branches-tags.sh: Add a PERL prerequisite
t/t9601-cvsimport-vendor-branch.sh: Add a PERL prerequisite
t/t7105-reset-patch.sh: Add a PERL prerequisite
t/t9001-send-email.sh: convert setup code to tests
t/t9001-send-email.sh: change from skip_all=* to prereq skip
t/t9001-send-email.sh: Remove needless PROG=* assignment
t/t9600-cvsimport.sh: change from skip_all=* to prereq skip
lib-patch-mode tests: change from skip_all=* to prereq skip
t/t3701-add-interactive.sh: change from skip_all=* to prereq skip
tests: Move FILEMODE prerequisite to lib-prereq-FILEMODE.sh
t/Makefile: Create test-results dir for smoke target
...
Conflicts:
t/t6035-merge-dir-to-symlink.sh
The same pattern is used in many tests, and makes it easy for new ones to
rely on $HOME being a trashable, clean, directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 9d2e942 (decode file:// and ssh:// URLs, 2010-05-23) the URL
logic unquotes escaped URLs. For the %2B type of escape, this is
conformant with RFC 2396. However, it also unquotes + into a space
character, which is only appropriate for the query strings in HTTP.
This notably broke fetching from the gtk+ repository.
We cannot just remove the corresponding code since the same
url_decode_internal() is also used by the HTTP backend to decode query
parameters. Introduce a new argument that controls whether the +
decoding happens, and use it only in the (client-side) url_decode().
Reported-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally treat these as equivalent to "/path/to/repo"
and "host:path_to_repo" respectively. However, they are URLs
and as such may be percent-encoded. The current code simply
uses them as-is without any decoding.
With this patch, we will now percent-decode any file:// or
ssh:// url (or ssh+git, git+ssh, etc) at the transport
layer. We continue to treat plain paths and "host:path"
syntax literally.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, a local git clone reports only initializing an empty
git dir, which is potentially confusing.
Instead, report that cloning is in progress and when it is done
(unless -q) is given, and suppress the init report.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code just leaves the transport in whatever state
it was in after performing the fetch. For a non-empty clone
over the git protocol, the transport code already
disconnects at the end of the fetch.
But for an empty clone, we leave the connection hanging, and
eventually close the socket when clone exits. This causes
the remote upload-pack to complain "the remote end hung up
unexpectedly". While this message is harmless to the clone
itself, it is unnecessarily scary for a user to see and may
pollute git-daemon logs.
This patch just explicitly calls disconnect after we are
done with the remote end, which sends a flush packet to
upload-pack and cleanly disconnects, avoiding the error
message.
Other transports are unaffected or slightly improved:
- for a non-empty repo over the git protocol, the second
disconnect is a no-op (since we are no longer connected)
- for "walker" transports (like HTTP or FTP), we actually
free some used memory (which previously just sat until
the clone process exits)
- for "rsync", disconnect is always a no-op anyway
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-clone creates an initial branch it was not checking the
branch.autosetuprebase configuration option (which may exist in
~/.gitconfig). Refactor the code used by "git branch" to create
a new branch, and use it instead of the insufficiently duplicated code
in builtin-clone.
Changes are partly, and the test is mostly, based on the previous work by
Pat Notz.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After "cloning from an empty repository", we have a configuration to
describe the remote's URL and the default ref mappings, but we lack the
branch configuration for the default branch we create on our end,
"master".
It is likely that the empty repository we cloned from will point the
default "master" branch with its HEAD, so prepare the local configuration
to match.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The die() message updated accordingly.
The previous behaviour was to only allow cloning when the destination
directory doesn't exist.
[jc: added trivial tests]
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git clone <repo> path/' (note the trailing slash) fails, because the
entire path is interpreted as leading directories. So when mkdir tries to
create the actual path, it already exists.
This makes sure trailing slashes are removed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --mirror, clone asks for refs/* already, so it does not need to
ask for ref/tags/*, too.
Noticed by Cesar Eduardo Barros.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This prevents double output in case stdout is redirected.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a tradition that bare repositories live in directories ending
in ".git". To make this more a convention than just a tradition, teach
"git clone --bare" to add a ".git" suffix to the directory name.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line
$ git clone --mirror $URL
is now a short-hand for
$ git clone --bare $URL
$ (cd $(basename $URL) && git remote add --mirror origin $URL)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once a clone is successful we no longer need to hold onto the
.keep file created by the transport. Delete the file so we
can later repack the complete repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell version used to use "mkdir -p" to create the repo
path, but the C version just calls "mkdir". Let's replicate
the old behavior. We have to create the git and worktree
leading dirs separately; while most of the time, the
worktree dir contains the git dir (as .git), the user can
override this using GIT_WORK_TREE.
We can reuse safe_create_leading_directories, but we need to
make a copy of our const buffer to do so. Since
merge-recursive uses the same pattern, we can factor this
out into a global function. This has two other cleanup
advantages for merge-recursive:
1. mkdir_p wasn't a very good name. "mkdir -p foo/bar" actually
creates bar, but this function just creates the leading
directories.
2. mkdir_p took a mode argument, but it was completely
ignored.
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Somewhere in the process of finishing up builtin-clone, the update of
the working tree was lost. This was due to not using the option "merge"
for unpack_trees().
Breakage noticed by Kevin Ballard.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Jeff King <peff@peff.net>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone [options] $src $dst excess-garbage" simply ignored
excess-garbage without giving any diagnostic message. Fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
