* maint-2.33:
Git 2.33.2
Git 2.32.1
Git 2.31.2
GIT-VERSION-GEN: bump to v2.33.1
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
* maint-2.32:
Git 2.32.1
Git 2.31.2
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
* maint-2.31:
Git 2.31.2
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
* maint-2.30:
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
Remove the 'reset.refresh' option, requiring that users explicitly specify
'--no-refresh' if they want to skip refreshing the index.
The 'reset.refresh' option was introduced in 101cee42dd (reset: introduce
--[no-]refresh option to --mixed, 2022-03-11) as a replacement for the
refresh-skipping behavior originally controlled by 'reset.quiet'.
Although 'reset.refresh=false' functionally served the same purpose as
'reset.quiet=true', it exposed [1] the fact that the existence of a global
"skip refresh" option could potentially cause problems for users. Allowing a
global config option to avoid refreshing the index forces scripts using 'git
reset --mixed' to defensively use '--refresh' if index refresh is expected;
if that option is missing, behavior of a script could vary from user-to-user
without explanation.
Furthermore, globally disabling index refresh in 'reset --mixed' was
initially devised as a passive performance improvement; since the
introduction of the option, other changes have been made to Git (e.g., the
sparse index) with a greater potential performance impact without
sacrificing index correctness. Therefore, we can more aggressively err on
the side of correctness and limit the cases of skipping index refresh to
only when a user specifies the '--no-refresh' option.
[1] https://lore.kernel.org/git/xmqqy2179o3c.fsf@gitster.g/
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the 'reset.quiet' config option, remove '--no-quiet' documentation in
'Documentation/git-reset.txt'. In 4c3abd0551 (reset: add new reset.quiet
config setting, 2018-10-23), 'reset.quiet' was introduced as a way to
globally change the default behavior of 'git reset --mixed' to skip index
refresh.
However, now that '--quiet' does not affect index refresh, 'reset.quiet'
would only serve to globally silence logging. This was not the original
intention of the config setting, and there's no precedent for such a setting
in other commands with a '--quiet' option, so it appears to be obsolete.
In addition to the options & its documentation, remove 'reset.quiet' from
the recommended config for 'scalar'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update '--quiet' to no longer implicitly skip refreshing the index in a
mixed reset. Users now have the ability to explicitly disable refreshing the
index with the '--no-refresh' option, so they no longer need to use
'--quiet' to do so. Moreover, we explicitly remove the refresh-skipping
behavior from '--quiet' because it is completely unrelated to the stated
purpose of the option: "Be quiet, only report errors."
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git repack" learned a new configuration to disable triggering of
age-old "update-server-info" command, which is rarely useful these
days.
* ps/repack-with-server-info:
repack: add config to skip updating server info
repack: refactor to avoid double-negation of update-server-info
The 'filter' capability was added in 105c6f14a (bundle: parse filter
capability, 2022-03-09), but was added in a strange place in the 'git
bundle verify' output.
The tests for this show output like the following:
The bundle contains these 2 refs:
<COMMIT1> <REF1>
<COMMIT2> <REF2>
The bundle uses this filter: blob:none
The bundle records a complete history.
This looks very odd if we have a thin bundle that contains boundary
commits instead of a complete history:
The bundle contains these 2 refs:
<COMMIT1> <REF1>
<COMMIT2> <REF2>
The bundle uses this filter: blob:none
The bundle requires these 2 refs:
<COMMIT3>
<COMMIT4>
This separation between tip refs and boundary refs is unfortunate. Move
the filter capability output to the end of the output. Update the
documentation to match.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'--object-only' is an alias for '--format=%(objectname)'. It cannot
be used together other format-altering options like '--name-only',
'--long' or '--format', they are mutually exclusive.
The "--name-only" option outputs <filepath> only. Likewise, <objectName>
is another high frequency used field, so implement '--object-only' option
will bring intuitive and clear semantics for this scenario. Using
'--format=%(objectname)' we can achieve a similar effect, but the former
is with a lower learning cost(without knowing the format requirement
of '--format' option).
Even so, if a user is prefer to use "--format=%(objectname)", this is entirely
welcome because they are not only equivalent in function, but also have almost
identical performance. The reason is this commit also add the specific of
"--format=%(objectname)" to the current fast-pathes (builtin formats) to
avoid running unnecessary parsing mechanisms.
The following performance benchmarks are based on torvalds/linux.git:
When hit the fast-path:
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --object-only HEAD
Time (mean ± σ): 83.6 ms ± 2.0 ms [User: 59.4 ms, System: 24.1 ms]
Range (min … max): 80.4 ms … 87.2 ms 35 runs
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(objectname)' HEAD
Time (mean ± σ): 84.1 ms ± 1.8 ms [User: 61.7 ms, System: 22.3 ms]
Range (min … max): 80.9 ms … 87.5 ms 35 runs
But for a customized format, it will be slower:
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='oid: %(objectname)' HEAD
Time (mean ± σ): 96.5 ms ± 2.5 ms [User: 72.9 ms, System: 23.5 ms]
Range (min … max): 93.1 ms … 104.1 ms 31 runs
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --format option to ls-tree. It has an existing default output,
and then --long and --name-only options to emit the default output
along with the objectsize and, or to only emit object paths.
Rather than add --type-only, --object-only etc. we can just support a
--format using a strbuf_expand() similar to "for-each-ref
--format". We might still add such options in the future for
convenience.
The --format implementation is slower than the existing code, but this
change does not cause any performance regressions. We'll leave the
existing show_tree() unchanged, and only run show_tree_fmt() in if
a --format different than the hardcoded built-in ones corresponding to
the existing modes is provided.
I.e. something like the "--long" output would be much slower with
this, mainly due to how we need to allocate various things to do with
quote.c instead of spewing the output directly to stdout.
The new option of '--format' comes from Ævar Arnfjörð Bjarmasonn's
idea and suggestion, this commit makes modifications in terms of the
original discussion on community [1].
In [1] there was a "GIT_TEST_LS_TREE_FORMAT_BACKEND" variable to
ensure that we had test coverage for passing tests that would
otherwise use show_tree() through show_tree_fmt(), and thus that the
formatting mechanism could handle all the same cases as the
non-formatting options.
Somewhere in subsequent re-rolls of that we seem to have drifted away
from what the goal of these tests should be. We're trying to ensure
correctness of show_tree_fmt(). We can't tell if we "hit [the]
fast-path" here, and instead of having an explicit test for that, we
can just add it to something our "test_ls_tree_format" tests for.
Here is the statistics about performance tests:
1. Default format (hitten the builtin formats):
"git ls-tree <tree-ish>" vs "--format='%(mode) %(type) %(object)%x09%(file)'"
$hyperfine --warmup=10 "/opt/git/master/bin/git ls-tree -r HEAD"
Benchmark 1: /opt/git/master/bin/git ls-tree -r HEAD
Time (mean ± σ): 105.2 ms ± 3.3 ms [User: 84.3 ms, System: 20.8 ms]
Range (min … max): 99.2 ms … 113.2 ms 28 runs
$hyperfine --warmup=10 "/opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object)%x09%(file)' HEAD"
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object)%x09%(file)' HEAD
Time (mean ± σ): 106.4 ms ± 2.7 ms [User: 86.1 ms, System: 20.2 ms]
Range (min … max): 100.2 ms … 110.5 ms 29 runs
2. Default format includes object size (hitten the builtin formats):
"git ls-tree -l <tree-ish>" vs "--format='%(mode) %(type) %(object) %(size:padded)%x09%(file)'"
$hyperfine --warmup=10 "/opt/git/master/bin/git ls-tree -r -l HEAD"
Benchmark 1: /opt/git/master/bin/git ls-tree -r -l HEAD
Time (mean ± σ): 335.1 ms ± 6.5 ms [User: 304.6 ms, System: 30.4 ms]
Range (min … max): 327.5 ms … 348.4 ms 10 runs
$hyperfine --warmup=10 "/opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object) %(size:padded)%x09%(file)' HEAD"
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object) %(size:padded)%x09%(file)' HEAD
Time (mean ± σ): 337.2 ms ± 8.2 ms [User: 309.2 ms, System: 27.9 ms]
Range (min … max): 328.8 ms … 349.4 ms 10 runs
Links:
[1] https://public-inbox.org/git/RFC-patch-6.7-eac299f06ff-20211217T131635Z-avarab@gmail.com/
[2] https://lore.kernel.org/git/cb717d08be87e3239117c6c667cb32caabaad33d.1646390152.git.dyroneteng@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bundle file format gets extended to allow a partial bundle,
filtered by similar criteria you would give when making a
partial/lazy clone.
* ds/partial-bundles:
clone: fail gracefully when cloning filtered bundle
bundle: unbundle promisor packs
bundle: create filtered bundles
rev-list: move --filter parsing into revision.c
bundle: parse filter capability
list-objects: handle NULL function pointers
MyFirstObjectWalk: update recommended usage
list-objects: consolidate traverse_commit_list[_filtered]
pack-bitmap: drop filter in prepare_bitmap_walk()
pack-objects: use rev.filter when possible
revision: put object filter into struct rev_info
list-objects-filter-options: create copy helper
index-pack: document and test the --promisor option
It poses a security risk to search for a git directory outside of the
directories owned by the current user.
For example, it is common e.g. in computer pools of educational
institutes to have a "scratch" space: a mounted disk with plenty of
space that is regularly swiped where any authenticated user can create
a directory to do their work. Merely navigating to such a space with a
Git-enabled `PS1` when there is a maliciously-crafted `/scratch/.git/`
can lead to a compromised account.
The same holds true in multi-user setups running Windows, as `C:\` is
writable to every authenticated user by default.
To plug this vulnerability, we stop Git from accepting top-level
directories owned by someone other than the current user. We avoid
looking at the ownership of each and every directories between the
current and the top-level one (if there are any between) to avoid
introducing a performance bottleneck.
This new default behavior is obviously incompatible with the concept of
shared repositories, where we expect the top-level directory to be owned
by only one of its legitimate users. To re-enable that use case, we add
support for adding exceptions from the new default behavior via the
config setting `safe.directory`.
The `safe.directory` config setting is only respected in the system and
global configs, not from repository configs or via the command-line, and
can have multiple values to allow for multiple shared repositories.
We are particularly careful to provide a helpful message to any user
trying to use a shared repository.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Fixes to the way generation number v2 in the commit-graph files are
(not) handled.
* ds/commit-graph-gen-v2-fixes:
commit-graph: declare bankruptcy on GDAT chunks
commit-graph: fix generation number v2 overflow values
commit-graph: start parsing generation v2 (again)
commit-graph: fix ordering bug in generation numbers
t5318: extract helpers to lib-commit-graph.sh
test-read-graph: include extra post-parse info
"git remote rename A B", depending on the number of remote-tracking
refs involved, takes long time renaming them. The command has been
taught to show progress bar while making the user wait.
* tb/rename-remote-progress:
builtin/remote.c: show progress when renaming remote references
builtin/remote.c: parse options in 'rename'
"git fetch --recurse-submodules" only considers populated
submodules (i.e. submodules that can be found by iterating the index),
which makes "git fetch" behave differently based on which commit is
checked out. As a result, even if the user has initialized all submodules
correctly, they may not fetch the necessary submodule commits, and
commands like "git checkout --recurse-submodules" might fail.
Teach "git fetch" to fetch cloned, changed submodules regardless of
whether they are populated. This is in addition to the current behavior
of fetching populated submodules (which is always attempted regardless
of what was fetched in the superproject, or even if nothing was fetched
in the superproject).
A submodule may be encountered multiple times (via the list of
populated submodules or via the list of changed submodules). When this
happens, "git fetch" only reads the 'populated copy' and ignores the
'changed copy'. Amend the verify_fetch_result() test helper so that we
can assert on which 'copy' is being read.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing both loose and packed references to disk we first create a
lockfile, write the updated values into that lockfile, and on commit we
rename the file into place. According to filesystem developers, this
behaviour is broken because applications should always sync data to disk
before doing the final rename to ensure data consistency [1][2][3]. If
applications fail to do this correctly, a hard crash of the machine can
easily result in corrupted on-disk data.
This kind of corruption can in fact be easily observed with Git when the
machine hard-resets shortly after writing references to disk. On
machines with ext4, this will likely lead to the "empty files" problem:
the file has been renamed, but its data has not been synced to disk. The
result is that the reference is corrupt, and in the worst case this can
lead to data loss.
Implement a new option to harden references so that users and admins can
avoid this scenario by syncing locked loose and packed references to
disk before we rename them into place.
[1]: https://thunk.org/tytso/blog/2009/03/15/dont-fear-the-fsync/
[2]: https://btrfs.wiki.kernel.org/index.php/FAQ (What are the crash guarantees of overwrite-by-rename)
[3]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/admin-guide/ext4.rst (see auto_da_alloc)
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ns/core-fsyncmethod:
core.fsync: documentation and user-friendly aggregate options
core.fsync: new option to harden the index
core.fsync: add configuration parsing
core.fsync: introduce granular fsync control infrastructure
core.fsyncmethod: add writeout-only mode
wrapper: make inclusion of Windows csprng header tightly scoped
This commit adds aggregate options for the core.fsync setting that are
more user-friendly. These options are specified in terms of 'levels of
safety', indicating which Git operations are considered to be sync
points for durability.
The new documentation is also included here in its entirety for ease of
review.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The synopsis for 'git maintenance' did not include the commands other
than the 'run' command. Update this to include the others. The 'start'
command is the only one of these that parses additional options, and
then only the --scheduler option.
Also move the 'register' command down after 'stop' and before
'unregister' for a logical grouping of the commands instead of an
alphabetical one. The diff makes it look as three other commands are
moved up.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace references to '--quiet' with '--no-refresh' in the advice on how to
skip refreshing the index. When the advice was introduced, '--quiet' was the
only way to avoid the expensive 'refresh_index(...)' at the end of a mixed
reset. After introducing '--no-refresh', however, '--quiet' became only a
fallback option for determining refresh behavior, overridden by
'--[no-]refresh' or 'reset.refresh' if either is set. To ensure users are
advised to use the most reliable option for avoiding 'refresh_index(...)',
replace recommendation of '--quiet' with '--[no-]refresh'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new --[no-]refresh option that is intended to explicitly determine
whether a mixed reset should end in an index refresh.
Starting at 9ac8125d1a (reset: don't compute unstaged changes after reset
when --quiet, 2018-10-23), using the '--quiet' option results in skipping
the call to 'refresh_index(...)' at the end of a mixed reset with the goal
of improving performance. However, by coupling behavior that modifies the
index with the option that silences logs, there is no way for users to have
one without the other (i.e., silenced logs with a refreshed index) without
incurring the overhead of a separate call to 'git update-index --refresh'.
Furthermore, there is minimal user-facing documentation indicating that
--quiet skips the index refresh, potentially leading to unexpected issues
executing commands after 'git reset --quiet' that do not themselves refresh
the index (e.g., internals of 'git stash', 'git read-tree').
To mitigate these issues, '--[no-]refresh' and 'reset.refresh' are
introduced to provide a dedicated mechanism for refreshing the index. When
either is set, '--quiet' and 'reset.quiet' revert to controlling only
whether logs are silenced and do not affect index refresh.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the advice describing index refresh from "enumerate unstaged changes"
to "refresh the index." Describing 'refresh_index(...)' as "enumerating
unstaged changes" is not fully representative of what an index refresh is
doing; more generally, it updates the properties of index entries that are
affected by outside-of-index state, e.g. CE_UPTODATE, which is affected by
the file contents on-disk. This distinction is relevant to operations that
read the index but do not refresh first - e.g., 'git read-tree' - where a
stale index may cause incorrect behavior.
In addition to changing the advice message, use the "advise" function to
print advice.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, git-repack(1) will update server info that is required by
the dumb HTTP transport. This can be skipped by passing the `-n` flag,
but what we're noticably missing is a config option to permanently
disable updating this information.
Add a new option "repack.updateServerInfo" which can be used to disable
the logic. Most hosting providers have turned off the dumb HTTP protocol
anyway, and on the client-side it woudln't typically be useful either.
Giving a persistent way to disable this feature thus makes quite some
sense to avoid wasting compute cycles and storage.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile refactoring with a bit of suffixes rule stripping to
optimize the runtime overhead.
* ab/make-optim-noop:
Makefiles: add and use wildcard "mkdir -p" template
Makefile: add "$(QUIET)" boilerplate to shared.mak
Makefile: move $(comma), $(empty) and $(space) to shared.mak
Makefile: move ".SUFFIXES" rule to shared.mak
Makefile: define $(LIB_H) in terms of $(FIND_SOURCE_FILES)
Makefile: disable GNU make built-in wildcard rules
Makefiles: add "shared.mak", move ".DELETE_ON_ERROR" to it
scalar Makefile: use "The default target of..." pattern
The xfuncname pattern finds func/class declarations
in diffs to display as a hunk header. The word_regex
pattern finds individual tokens in Kotlin code to generate
appropriate diffs.
This patch adds xfuncname regex and word_regex for Kotlin
language.
Signed-off-by: Jaydeep P Das <jaydeepjd.8914@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change introduces code to parse the core.fsync setting and
configure the fsync_components variable.
core.fsync is configured as a comma-separated list of component names to
sync. Each time a core.fsync variable is encountered in the
configuration heirarchy, we start off with a clean state with the
platform default value. Passing 'none' resets the value to indicate
nothing will be synced. We gather all negative and positive entries from
the comma separated list and then compute the new value by removing all
the negative entries and adding all of the positive entries.
We issue a warning for components that are not recognized so that the
configuration code is compatible with configs from future versions of
Git with more repo components.
Complete documentation for the new setting is included in a later patch
in the series so that it can be reviewed once in final form.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces the `core.fsyncMethod` configuration
knob, which can currently be set to `fsync` or `writeout-only`.
The new writeout-only mode attempts to tell the operating system to
flush its in-memory page cache to the storage hardware without issuing a
CACHE_FLUSH command to the storage controller.
Writeout-only fsync is significantly faster than a vanilla fsync on
common hardware, since data is written to a disk-side cache rather than
all the way to a durable medium. Later changes in this patch series will
take advantage of this primitive to implement batching of hardware
flushes.
When git_fsync is called with FSYNC_WRITEOUT_ONLY, it may fail and the
caller is expected to do an ordinary fsync as needed.
On Apple platforms, the fsync system call does not issue a CACHE_FLUSH
directive to the storage controller. This change updates fsync to do
fcntl(F_FULLFSYNC) to make fsync actually durable. We maintain parity
with existing behavior on Apple platforms by setting the default value
of the new core.fsyncMethod option.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updates to how command line options to "git help" are handled.
* ab/help-fixes:
help: don't print "\n" before single-section output
help: add --no-[external-commands|aliases] for use with --all
help: error if [-a|-g|-c] and [-i|-m|-w] are combined
help: correct usage & behavior of "git help --all"
help: note the option name on option incompatibility
help.c: split up list_all_cmds_help() function
help tests: test "git" and "git help [-a|-g] spacing
help.c: use puts() instead of printf{,_ln}() for consistency
help doc: add missing "]" to "[-a|--all]"
Remove the escape hatch we added when we introduced the weather
balloon to use variadic macros unconditionally, to make it official
that we now have a hard dependency on the feature.
* ab/c99-variadic-macros:
C99: remove hardcoded-out !HAVE_VARIADIC_MACROS code
git-compat-util.h: clarify GCC v.s. C99-specific in comment
General clean-up in reftable implementation, including
clarification of the API documentation, tightening the code to
honor documented length limit, etc.
* hn/reftable-no-empty-keys:
reftable: rename writer_stats to reftable_writer_stats
reftable: add test for length of disambiguating prefix
reftable: ensure that obj_id_len is >= 2 on writing
reftable: avoid writing empty keys at the block layer
reftable: add a test that verifies that writing empty keys fails
reftable: reject 0 object_id_len
Documentation: object_id_len goes up to 31
"git cat-file" learns "--batch-command" mode, which is a more
flexible interface than the existing "--batch" or "--batch-check"
modes, to allow different kinds of inquiries made.
* jc/cat-file-batch-commands:
cat-file: add --batch-command mode
cat-file: add remove_timestamp helper
cat-file: introduce batch_mode enum to replace print_contents
cat-file: rename cmdmode to transform_mode
In sparse-checkouts, files mis-marked as missing from the working tree
could lead to later problems. Such files were hard to discover, and
harder to correct. Automatically detecting and correcting the marking
of such files has been added to avoid these problems.
* en/present-despite-skipped:
repo_read_index: add config to expect files outside sparse patterns
Accelerate clear_skip_worktree_from_present_files() by caching
Update documentation related to sparsity and the skip-worktree bit
repo_read_index: clear SKIP_WORKTREE bit from files present in worktree
unpack-trees: fix accidental loss of user changes
t1011: add testcase demonstrating accidental loss of user modifications
The v3 bundle format has capabilities, allowing newer versions of Git to
create bundles with newer features. Older versions that do not
understand these new capabilities will fail with a helpful warning.
Create a new capability allowing Git to understand that the contained
pack-file is filtered according to some object filter. Typically, this
filter will be "blob:none" for a blobless partial clone.
This change teaches Git to parse this capability, place its value in the
bundle header, and demonstrate this understanding by adding a message to
'git bundle verify'.
Since we will use gently_parse_list_objects_filter() outside of
list-objects-filter-options.c, make it an external method and move its
API documentation to before its declaration.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change consolidated traverse_commit_list() and
traverse_commit_list_filtered(). This allows us to simplify the
recommended usage in MyFirstObjectWalk.txt to use this new set of
values.
While here, add some clarification on the difference between the two
methods.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --promisor option of 'git index-pack' was created in 88e2f9e
(introduce fetch-object: fetch one promisor object, 2017-12-05) but was
untested. It is currently unused within the Git codebase, but that will
change in an upcoming change to 'git bundle unbundle' when there is a
filter capability.
For now, add documentation about the option and add a test to ensure it
is working as expected.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Generation Data (GDAT) and Generation Data Overflow (GDOV) chunks
store corrected commit date offsets, used for generation number v2.
Recent changes have demonstrated that previous versions of Git were
incorrectly parsing data from these chunks, but might have also been
writing them incorrectly.
I asserted [1] that the previous fixes were sufficient because the known
reasons for incorrectly writing generation number v2 data relied on
parsing the information incorrectly out of a commit-graph file, but the
previous versions of Git were not reading the generation number v2 data.
However, Patrick demonstrated [2] a case where in split commit-graphs
across an alternate boundary (and possibly some other special
conditions) it was possible to have a commit-graph that was generated by
a previous version of Git have incorrect generation number v2 data which
results in errors like the following:
commit-graph generation for commit <oid> is 1623273624 < 1623273710
[1] https://lore.kernel.org/git/f50e74f0-9ffa-f4f2-4663-269801495ed3@github.com/
[2] https://lore.kernel.org/git/Yh93vOkt2DkrGPh2@ncase/
Clearly, there is something else going on. The situation is not
completely understood, but the errors do not reproduce if the
commit-graphs are all generated by a Git version including these recent
fixes.
If we cannot trust the existing data in the GDAT and GDOV chunks, then
we can alter the format to change the chunk IDs for these chunks. This
causes the new version of Git to silently ignore the older chunks (and
disabling generation number v2 in the process) while writing new
commit-graph files with correct data in the GDA2 and GDO2 chunks.
Update commit-graph-format.txt including a historical note about these
deprecated chunks.
Reported-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many output modes of "ls-files" do not work with its
"--recurse-submodules" option, but the "-s" mode has been taught to
work with it.
* jt/ls-files-stage-recurse:
ls-files: support --recurse-submodules --stage
The error message given by "git switch HEAD~4" has been clarified
to suggest the "--detach" option that is required.
* ah/advice-switch-requires-detach-to-detach:
switch: mention the --detach option when dying due to lack of a branch
Tighten the language around "working tree" and "worktree" in the
docs.
* ds/worktree-docs:
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: extract checkout_worktree()
worktree: extract copy_sparse_checkout()
worktree: extract copy_filtered_worktree_config()
worktree: combine two translatable messages
When renaming a remote, Git needs to rename all remote tracking
references to the remote's new name (e.g., renaming
"refs/remotes/old/foo" to "refs/remotes/new/foo" when renaming a remote
from "old" to "new").
This can be somewhat slow when there are many references to rename,
since each rename is done in a separate call to rename_ref() as opposed
to grouping all renames together into the same transaction. It would be
nice to execute all renames as a single transaction, but there is a
snag: the reference transaction backend doesn't support renames during a
transaction (only individually, via rename_ref()).
The reasons there are described in more detail in [1], but the main
problem is that in order to preserve the existing reflog, it must be
moved while holding both locks (i.e., on "oldname" and "newname"), and
the ref transaction code doesn't support inserting arbitrary actions
into the middle of a transaction like that.
As an aside, adding support for this to the ref transaction code is
less straightforward than inserting both a ref_update() and ref_delete()
call into the same transaction. rename_ref()'s special handling to
detect D/F conflicts would need to be rewritten for the transaction code
if we wanted to proactively catch D/F conflicts when renaming a
reference during a transaction. The reftable backend could support this
much more readily because of its lack of D/F conflicts.
Instead of a more complex modification to the ref transaction code,
display a progress meter when running verbosely in order to convince the
user that Git is doing work while renaming a remote.
This is mostly done as-expected, with the minor caveat that we
intentionally count symrefs renames twice, since renaming a symref takes
place over two separate calls (one to delete the old one, and another to
create the new one).
[1]: https://lore.kernel.org/git/572367B4.4050207@alum.mit.edu/
Suggested-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it consistent with the rest of the documentation.
Signed-off-by: Nihal Jere <nihal@nihaljere.xyz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a template to do the "mkdir -p" of $(@D) (the parent dir of $@)
for us, and use it for the "make lint-docs" targets I added in
8650c6298c (doc lint: make "lint-docs" non-.PHONY, 2021-10-15).
As seen in 4c64fb5aad (Documentation/Makefile: fix lint-docs mkdir
dependency, 2021-10-26) maintaining these manual lists of parent
directory dependencies is fragile, in addition to being obviously
verbose.
I used this pattern at the time because I couldn't find another method
than "order-only" prerequisites to avoid doing a "mkdir -p $(@D)" for
every file being created, which as noted in [1] would be significantly
slower.
But as it turns out we can use this neat trick of only doing a "mkdir
-p" if the $(wildcard) macro tells us the path doesn't exist. A re-run
of a performance test similar to that noted downthread of [1] in [2]
shows that this is faster, in addition to being less verbose and more
reliable (this uses my "git-hyperfine" thin wrapper for "hyperfine"[3]):
$ git -c hyperfine.hook.setup= hyperfine -L rev HEAD~1,HEAD~0 -s 'make -C Documentation lint-docs' -p 'rm -rf Documentation/.build' 'make -C Documentation -j1 lint-docs'
Benchmark 1: make -C Documentation -j1 lint-docs' in 'HEAD~1
Time (mean ± σ): 2.914 s ± 0.062 s [User: 2.449 s, System: 0.489 s]
Range (min … max): 2.834 s … 3.020 s 10 runs
Benchmark 2: make -C Documentation -j1 lint-docs' in 'HEAD~0
Time (mean ± σ): 2.315 s ± 0.062 s [User: 1.950 s, System: 0.386 s]
Range (min … max): 2.229 s … 2.397 s 10 runs
Summary
'make -C Documentation -j1 lint-docs' in 'HEAD~0' ran
1.26 ± 0.04 times faster than 'make -C Documentation -j1 lint-docs' in 'HEAD~1'
So let's use that pattern both for the "lint-docs" target, and a few
miscellaneous other targets.
This method of creating parent directories is explicitly racy in that
we don't know if we're going to say always create a "foo" followed by
a "foo/bar" under parallelism, or skip the "foo" because we created
"foo/bar" first. In this case it doesn't matter for anything except
that we aren't guaranteed to get the same number of rules firing when
running make in parallel.
1. https://lore.kernel.org/git/211028.861r45y3pt.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/211028.86o879vvtp.gmgdl@evledraar.gmail.com/
3. https://gitlab.com/avar/git-hyperfine/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The $(QUIET) variables we define are largely duplicated between our
various Makefiles, let's define them in the new "shared.mak" instead.
Since we're not using the environment to pass these around we don't
need to export the "QUIET_GEN" and "QUIET_BUILT_IN" variables
anymore. The "QUIET_GEN" variable is used in "git-gui/Makefile" and
"gitweb/Makefile", but they've got their own definition for those. The
"QUIET_BUILT_IN" variable is only used in the top-level "Makefile". We
still need to export the "V" variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have various behavior that's shared across our Makefiles, or that
really should be (e.g. via defined templates). Let's create a
top-level "shared.mak" to house those sorts of things, and start by
adding the ".DELETE_ON_ERROR" flag to it.
See my own 7b76d6bf22 (Makefile: add and use the ".DELETE_ON_ERROR"
flag, 2021-06-29) and db10fc6c09 (doc: simplify Makefile using
.DELETE_ON_ERROR, 2021-05-21) for the addition and use of the
".DELETE_ON_ERROR" flag.
I.e. this changes the behavior of existing rules in the altered
Makefiles (except "Makefile" & "Documentation/Makefile"). I'm
confident that this is safe having read the relevant rules in those
Makfiles, and as the GNU make manual notes that it isn't the default
behavior is out of an abundance of backwards compatibility
caution. From edition 0.75 of its manual, covering GNU make 4.3:
[Enabling '.DELETE_ON_ERROR' is] almost always what you want
'make' to do, but it is not historical practice; so for
compatibility, you must explicitly request it.
This doesn't introduce a bug by e.g. having this
".DELETE_ON_ERROR" flag only apply to this new shared.mak, Makefiles
have no such scoping semantics.
It does increase the danger that any Makefile without an explicit "The
default target of this Makefile is..." snippet to define the default
target as "all" could have its default rule changed if our new
shared.mak ever defines a "real" rule. In subsequent commits we'll be
careful not to do that, and such breakage would be obvious e.g. in the
case of "make -C t".
We might want to make that less fragile still (e.g. by using
".DEFAULT_GOAL" as noted in the preceding commit), but for now let's
simply include "shared.mak" without adding that boilerplate to all the
Makefiles that don't have it already. Most of those are already
exposed to that potential caveat e.g. due to including "config.mak*".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Typically with sparse checkouts, we expect files outside the sparsity
patterns to be marked as SKIP_WORKTREE and be missing from the working
tree. Sometimes this expectation would be violated however; including
in cases such as:
* users grabbing files from elsewhere and writing them to the worktree
(perhaps by editing a cached copy in an editor, copying/renaming, or
even untarring)
* various git commands having incomplete or no support for the
SKIP_WORKTREE bit[1,2]
* users attempting to "abort" a sparse-checkout operation with a
not-so-early Ctrl+C (updating $GIT_DIR/info/sparse-checkout and the
working tree is not atomic)[3].
When the SKIP_WORKTREE bit in the index did not reflect the presence of
the file in the working tree, it traditionally caused confusion and was
difficult to detect and recover from. So, in a sparse checkout, since
af6a51875a (repo_read_index: clear SKIP_WORKTREE bit from files present
in worktree, 2022-01-14), Git automatically clears the SKIP_WORKTREE
bit at index read time for entries corresponding to files that are
present in the working tree.
There is another workflow, however, where it is expected that paths
outside the sparsity patterns appear to exist in the working tree and
that they do not lose the SKIP_WORKTREE bit, at least until they get
modified. A Git-aware virtual file system[4] takes advantage of its
position as a file system driver to expose all files in the working
tree, fetch them on demand using partial clone on access, and tell Git
to pay attention to them on demand by updating the sparse checkout
pattern on writes. This means that commands like "git status" only have
to examine files that have potentially been modified, whereas commands
like "ls" are able to show the entire codebase without requiring manual
updates to the sparse checkout pattern.
Thus since af6a51875a, Git with such Git-aware virtual file systems
unsets the SKIP_WORKTREE bit for all files and commands like "git
status" have to fetch and examine them all.
Introduce a configuration setting sparse.expectFilesOutsideOfPatterns to
allow limiting the tracked set of files to a small set once again. A
Git-aware virtual file system or other application that wants to
maintain files outside of the sparse checkout can set this in a
repository to instruct Git not to check for the presence of
SKIP_WORKTREE files. The setting defaults to false, so most users of
sparse checkout will still get the benefit of an automatically updating
index to recover from the variety of difficult issues detailed in
af6a51875a for paths with SKIP_WORKTREE set despite the path being
present.
[1] https://lore.kernel.org/git/xmqqbmb1a7ga.fsf@gitster-ct.c.googlers.com/
[2] The three long paragraphs in the middle of
https://lore.kernel.org/git/CABPp-BH9tju7WVm=QZDOvaMDdZbpNXrVWQdN-jmfN8wC6YVhmw@mail.gmail.com/
[3] https://lore.kernel.org/git/CABPp-BFnFpzwGC11TLoLs8YK5yiisA5D5-fFjXnJsbESVDwZsA@mail.gmail.com/
[4] such as the vfsd described in
https://lore.kernel.org/git/20220207190320.2960362-1-jonathantanmy@google.com/
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users who are accustomed to doing `git checkout <tag>` assume that
`git switch <tag>` will do the same thing. Inform them of the --detach
option so they aren't left wondering why `git switch` doesn't work but
`git checkout` does.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --filter=... --recurse-submodules" only makes the
top-level a partial clone, while submodules are fully cloned. This
behaviour is changed to pass the same filter down to the submodules.
* js/apply-partial-clone-filters-recursively:
clone, submodule: pass partial clone filters to submodules
"git sparse-checkout" wants to work with per-worktree configuration,
but did not work well in a worktree attached to a bare repository.
* ds/sparse-checkout-requires-per-worktree-config:
config: make git_configset_get_string_tmp() private
worktree: copy sparse-checkout patterns and config on add
sparse-checkout: set worktree-config correctly
config: add repo_config_set_worktree_gently()
worktree: create init_worktree_config()
Documentation: add extensions.worktreeConfig details
e77aa336f1 ("ls-files: optionally recurse into submodules", 2016-10-10)
taught ls-files the --recurse-submodules argument, but only in a limited
set of circumstances. In particular, --stage was unsupported, perhaps
because there was no repo_find_unique_abbrev(), which was only
introduced in 8bb95572b0 ("sha1-name.c: add
repo_find_unique_abbrev_r()", 2019-04-16). This function is needed for
using --recurse-submodules with --stage.
Now that we have repo_find_unique_abbrev(), teach support for this
combination of arguments.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to only emit git's own usage information under
--all. This also allows us to extend the "test_section_spacing" tests
added in a preceding commit to test "git help --all"
output.
Previously we could not do that, as the tests might find a git-*
command in the "$PATH", which would make the output differ from one
setup to another.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do the same for the "--all" option that I did for "--guides" in
9856ea6785 (help: correct usage & behavior of "git help --guides",
2021-09-22). I.e. we've documented it as ignoring non-option
arguments, let's have it error out instead.
As with other changes made in 62f035aee3 (Merge branch
'ab/help-config-vars', 2021-10-13) this is technically a change in
behavior, but in practice it's just a bug fix. We were ignoring this
before, but by erroring we can simplify our documentation and
synopsis, as well as avoid user confusion as they wonder what the
difference between e.g. "git help --all" and "git help --all status"
is (there wasn't any difference).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing "]" to documentation added in 63eae83f8f (help: add "-a
--verbose" to list all commands with synopsis, 2018-05-20). This made
it seem as though "--[no-]verbose" can only be provided with "--all",
not "-a". The corresponding usage information in the C
code ("builtin_help_usage") does not have the same problem.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The value is stored in a 5-bit field, so we can't support more without
a format version upgrade.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the last of multiple changes to git-worktree.txt, starting at
the LIST OUTPUT FORMAT section.
The EXAMPLES section has an instance of "working tree" that must stay as
it is, because it is not talking about a worktree, but an example of why
a user might want to create a worktree.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the sixth of multiple changes to git-worktree.txt, restricted to
the DETAILS section.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the fifth of multiple changes to git-worktree.txt, restricted to
the CONFIGURATION FILE section.
While here, clear up some language to improve readability.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the fourth of multiple changes to git-worktree.txt, restricted
to the REFS section.
This section previously described "per working tree" refs but they are
now replaced with "per-worktree" refs, which matches the definition in
glossary-content.txt.
The first paragraph of this section was also a bit confusing, so it is
cleaned up to make it easier to understand.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the third of multiple changes to git-worktree.txt, restricted to
the OPTIONS section.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the second of multiple changes to git-worktree.txt, restricted
to the COMMANDS section.
There is some language around the movement of "the working tree of a
linked worktree" which is used once, but the remaining uses are left as
just moving "a linked worktree" for brevity.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the first of multiple changes to git-worktree.txt, restricted to
the DESCRIPTION section.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "else" branches of the HAVE_VARIADIC_MACROS macro, which
have been unconditionally omitted since 765dc16888 (git-compat-util:
always enable variadic macros, 2021-01-28).
Since were always omitted, anyone trying to use a compiler without
variadic macro support to compile a git since version
git v2.31.0 or later would have had a compilation error. 10 months
across a few releases since then should have been enough time for
anyone who cared to run into that and report the issue.
In addition to that, for anyone unsetting HAVE_VARIADIC_MACROS we've
been emitting extremely verbose warnings since at least
ee4512ed48 (trace2: create new combined trace facility,
2019-02-22). That's because there is no such thing as a
"region_enter_printf" or "region_leave_printf" format, so at least
under GCC and Clang everything that includes trace.h (almost every
file) emits a couple of warnings about that.
There's a large benefit to being able to have a hard dependency rely
on variadic macros, the code surrounding usage.c is hard to maintain
if we need to write two implementations of everything, and by relying
on "__FILE__" and "__LINE__" along with "__VA_ARGS__" we can in the
future make error(), die() etc. log where they were called from. We've
also recently merged d67fc4bf0b (Merge branch 'bc/require-c99',
2021-12-10) which further cements our hard dependency on C99.
So let's delete the fallback code, and update our CodingGuidelines to
note that we depend on this. The added bullet-point starts with
lower-case for consistency with other bullet-points in that section.
The diff in "trace.h" is relatively hard to read, since we need to
retain the existing API docs, which were comments on the code used if
HAVE_VARIADIC_MACROS was not defined.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"working tree" and "per-worktree ref" were in glossary, but
"worktree" itself wasn't, which has been corrected.
* jc/glossary-worktree:
glossary: describe "worktree"
"git branch" learned the "--recurse-submodules" option.
* gc/branch-recurse-submodules:
branch.c: use 'goto cleanup' in setup_tracking() to fix memory leaks
branch: add --recurse-submodules option for branch creation
builtin/branch: consolidate action-picking logic in cmd_branch()
branch: add a dry_run parameter to create_branch()
branch: make create_branch() always create a branch
branch: move --set-upstream-to behavior to dwim_and_setup_tracking()
Add a new flag --batch-command that accepts commands and arguments
from stdin, similar to git-update-ref --stdin.
At GitLab, we use a pair of long running cat-file processes when
accessing object content. One for iterating over object metadata with
--batch-check, and the other to grab object contents with --batch.
However, if we had --batch-command, we wouldn't need to keep both
processes around, and instead just have one --batch-command process
where we can flip between getting object info, and getting object
contents. Since we have a pair of cat-file processes per repository,
this means we can get rid of roughly half of long lived git cat-file
processes. Given there are many repositories being accessed at any given
time, this can lead to huge savings.
git cat-file --batch-command
will enter an interactive command mode whereby the user can enter in
commands and their arguments that get queued in memory:
<command1> [arg1] [arg2] LF
<command2> [arg1] [arg2] LF
When --buffer mode is used, commands will be queued in memory until a
flush command is issued that execute them:
flush LF
The reason for a flush command is that when a consumer process (A)
talks to a git cat-file process (B) and interactively writes to and
reads from it in --buffer mode, (A) needs to be able to control when
the buffer is flushed to stdout.
Currently, from (A)'s perspective, the only way is to either
1. kill (B)'s process
2. send an invalid object to stdin.
1. is not ideal from a performance perspective as it will require
spawning a new cat-file process each time, and 2. is hacky and not a
good long term solution.
With this mechanism of queueing up commands and letting (A) issue a
flush command, process (A) can control when the buffer is flushed and
can guarantee it will receive all of the output when in --buffer mode.
--batch-command also will not allow (B) to flush to stdout until a flush
is received.
This patch adds the basic structure for adding command which can be
extended in the future to add more commands. It also adds the following
two commands (on top of the flush command):
contents <object> LF
info <object> LF
The contents command takes an <object> argument and prints out the object
contents.
The info command takes an <object> argument and prints out the object
metadata.
These can be used in the following way with --buffer:
info <object> LF
contents <object> LF
contents <object> LF
info <object> LF
flush LF
info <object> LF
flush LF
When used without --buffer:
info <object> LF
contents <object> LF
contents <object> LF
info <object> LF
info <object> LF
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-index", "git checkout-index", and "git clean" are
taught to work better with the sparse checkout feature.
* vd/sparse-clean-etc:
update-index: reduce scope of index expansion in do_reupdate
update-index: integrate with sparse index
update-index: add tests for sparse-checkout compatibility
checkout-index: integrate with sparse index
checkout-index: add --ignore-skip-worktree-bits option
checkout-index: expand sparse checkout compatibility tests
clean: integrate with sparse index
reset: reorder wildcard pathspec conditions
reset: fix validation in sparse index test
"git log" and friends learned an option --exclude-first-parent-only
to propagate UNINTERESTING bit down only along the first-parent
chain, just like --first-parent option shows commits that lack the
UNINTERESTING bit only along the first-parent chain.
* jz/rev-list-exclude-first-parent-only:
git-rev-list: add --exclude-first-parent-only flag
Removal of unused code and doc.
* js/no-more-legacy-stash:
stash: stop warning about the obsolete `stash.useBuiltin` config setting
stash: remove documentation for `stash.useBuiltin`
add: remove support for `git-legacy-stash`
git-sh-setup: remove remnant bits referring to `git-legacy-stash`
"git diff --diff-filter=aR" is now parsed correctly.
* js/diff-filter-negation-fix:
diff-filter: be more careful when looking for negative bits
diff.c: move the diff filter bits definitions up a bit
docs(diff): lose incorrect claim about `diff-files --diff-filter=A`
Interaction between fetch.negotiationAlgorithm and
feature.experimental configuration variables has been corrected.
* en/fetch-negotiation-default-fix:
repo-settings: rename the traditional default fetch.negotiationAlgorithm
repo-settings: fix error handling for unknown values
repo-settings: fix checking for fetch.negotiationAlgorithm=default
A bug that made multi-pack bitmap and the object order out-of-sync,
making the .midx data corrupt, has been fixed.
* tb/midx-bitmap-corruption-fix:
pack-bitmap.c: gracefully fallback after opening pack/MIDX
midx: read `RIDX` chunk when present
t/lib-bitmap.sh: parameterize tests over reverse index source
t5326: move tests to t/lib-bitmap.sh
t5326: extract `test_rev_exists`
t5326: drop unnecessary setup
pack-revindex.c: instrument loading on-disk reverse index
midx.c: make changing the preferred pack safe
t5326: demonstrate bitmap corruption after permutation
"git log --remerge-diff" shows the difference from mechanical merge
result and the result that is actually recorded in a merge commit.
* en/remerge-diff:
diff-merges: avoid history simplifications when diffing merges
merge-ort: mark conflict/warning messages from inner merges as omittable
show, log: include conflict/warning messages in --remerge-diff headers
diff: add ability to insert additional headers for paths
merge-ort: format messages slightly different for use in headers
merge-ort: mark a few more conflict messages as omittable
merge-ort: capture and print ll-merge warnings in our preferred fashion
ll-merge: make callers responsible for showing warnings
log: clean unneeded objects during `log --remerge-diff`
show, log: provide a --remerge-diff capability
The `eol` takes effect on text files only when the index has the
contents in LF line endings. Paths with contents in CRLF line
endings in the index may become dirty unless text=auto.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the contributor-facing documents on proposed log messages.
* jc/doc-log-messages:
SubmittingPatches: explain why we care about log messages
CodingGuidelines: hint why we value clearly written log messages
SubmittingPatches: write problem statement in the log in the present tense
Doc and test update around the eol attribute.
* bc/clarify-eol-attr:
docs: correct documentation about eol attribute
t0027: add tests for eol without text in .gitattributes
We have description on "per worktree ref", but "worktree" is not
described in the glossary. We do have "working tree", though.
Casually put, a "working tree" is what your editor and compiler
interacts with. "worktree" is a mechanism to allow one or more
"working tree"s to be attached to a repository and used to check out
different commits and branches independently, which includes not
just a "working tree" but also repository metadata like HEAD, the
index to support simultaneous use of them. Historically, we used
these terms interchangeably but we have been trying to use "working
tree" when we mean it, instead of "worktree".
Most of the existing references to "working tree" in the glossary do
refer primarily to the working tree portion, except for one that
said refs like HEAD and refs/bisect/* are per "working tree", but it
is more precise to say they are per "worktree".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
