The handle_object function is rather vaguely named; it only
operates on blobs, and its purpose is to export the blob to
the output stream. Let's call it "export_blob" to make it
more clear what it does.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we pack an annotated tag ref, we write not only the
sha1 of the tag object along with the ref, but also the sha1
obtained by peeling the tag. This lets readers of the
pack-refs file know the peeled value without having to
actually load the object, speeding up upload-pack's ref
advertisement.
The writer marks a packed-refs file with peeled refs using
the "peeled" trait at the top of the file. When the reader
sees this trait, it knows that each ref is either followed
by its peeled value, or it is not an annotated tag.
However, there is a mismatch between the assumptions of the
reader and writer. The writer will only peel refs under
refs/tags, but the reader does not know this; it will assume
a ref without a peeled value must not be a tag object. Thus
an annotated tag object placed outside of the refs/tags
hierarchy will not have its peeled value printed by
upload-pack.
The simplest way to fix this is to start writing peel values
for all refs. This matches what the reader expects for both
new and old versions of git.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some call-sites do:
o = parse_object(sha1);
if (!o)
die("bad object %s", some_name);
We can now handle that as a one-liner, and get more
consistent output.
In the third case of this patch, it looks like we are losing
information, as the existing message also outputs the sha1
hex; however, parse_object will already have written a more
specific complaint about the sha1, so there is no point in
repeating it here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many call-sites of parse_object assume that they will get a
non-NULL return value; this is not the case if we encounter
an error while parsing the object.
This patch adds a wrapper function around parse_object that
handles dying automatically, and uses it anywhere we
immediately try to access the return value as a non-NULL
pointer (i.e., anywhere that we would currently segfault).
This wrapper may also be useful in other places. The most
obvious one is code like:
o = parse_object(sha1);
if (!o)
die(...);
However, these should not be mechanically converted to
parse_object_or_die, as the die message is sometimes
customized. Later patches can address these sites on a
case-by-case basis.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rev-parse: clarify documentation of $name@{upstream} syntax
sha1_name: pass object name length to diagnose_invalid_sha1_path()
Makefile: keep LIB_H entries together and sorted
"git rev-parse" interprets string in string@{upstream} as a name of
a branch not a ref. For example, refs/heads/master@{upstream} looks
for an upstream branch that is merged by git-pull to ref
refs/heads/refs/heads/master not to refs/heads/master.
However the documentation could mislead a user to believe that the
string is interpreted as ref.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only caller of diagnose_invalid_sha1_path() extracts a substring from
an object name by creating a NUL-terminated copy of the interesting part.
Add a length parameter to the function and thus avoid the need for an
allocation, thereby simplifying the code.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git pull passed -q and -v only to git merge, but they can be useful for
git rebase as well, so pass them there, too.
In particular, using -q shuts up the "Already up-to-date." message.
Especially, a new test script runs the same "pull --rebase" twice to
make sure both cases are quiet, when it has something to fetch and
when it is already up to date.
Signed-off-by: Peter Eisentraut <peter@eisentraut.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids unnecessary re-allocations and reinsertions. On webkit.git
(i.e. about 182k inserts to the name hash table), this reduces about
100ms out of 3s user time.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a follow-up to 60d24dd25 (Makefile: fold XDIFF_H and VCSSVN_H into
LIB_H), let the unconditional additions to LIB_H form a single sorted
list. Also drop the duplicate entry for xdiff/xdiff.h, which was easy
to spot after sorting.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a long-time security feature that upload-pack will not
serve any "want" lines that do not correspond to the tip of
one of our refs. Traditionally, this was enforced by
checking the objects in the in-memory hash; they should have
been loaded and received the OUR_REF flag during the
advertisement.
The stateless-rpc mode, however, has a race condition here:
one process advertises, and another receives the want lines,
so the refs may have changed in the interim. To address
this, commit 051e400 added a new verification mode; if the
object is not OUR_REF, we set a "has_non_tip" flag, and then
later verify that the requested objects are reachable from
our current tips.
However, we still die immediately when the object is not in
our in-memory hash, and at this point we should only have
loaded our tip objects. So the check_non_tip code path does
not ever actually trigger, as any non-tip objects would
have already caused us to die.
We can fix that by using parse_object instead of
lookup_object, which will load the object from disk if it
has not already been loaded.
We still need to check that parse_object does not return
NULL, though, as it is possible we do not have the object
at all. A more appropriate error message would be "no such
object" rather than "not our ref"; however, we do not want
to leak information about what objects are or are not in
the object database, so we continue to use the same "not
our ref" message that would be produced by an unreachable
object.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When upload-pack receives a "want" line from the client, it
adds it to an object array. We call lookup_object to find
the actual object, which will only check for objects already
in memory. This works because we are expecting to find
objects that we already loaded during the ref advertisement.
We use the resulting object structs for a variety of
purposes. Some of them care only about the object flags, but
others care about the type of the object (e.g.,
ok_to_give_up), or even feed them to the revision parser
(when --depth is used), which assumes that objects it
receives are fully parsed.
Once upon a time, this was OK; any object we loaded into
memory would also have been parsed. But since 435c833
(upload-pack: use peel_ref for ref advertisements,
2012-10-04), we try to avoid parsing objects during the ref
advertisement. This means that lookup_object may return an
object with a type of OBJ_NONE. The resulting mess depends
on the exact set of objects, but can include the revision
parser barfing, or the shallow code sending the wrong set of
objects.
This patch teaches upload-pack to parse each "want" object
as we receive it. We do not replace the lookup_object call
with parse_object, as the current code is careful not to let
just any object appear on a "want" line, but rather only one
we have previously advertised (whereas parse_object would
actually load any arbitrary object from disk).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we receive a "have" line from the client, we want to
load the object pointed to by the sha1. However, we are
careful to do:
o = lookup_object(sha1);
if (!o || !o->parsed)
o = parse_object(sha1);
to avoid loading the object from disk if we have already
seen it. However, since ccdc603 (parse_object: try internal
cache before reading object db), parse_object already does
this optimization internally. We can just call parse_object
directly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This prints more helpful info when HEAD is detached: is it detached
because of bisect or rebase? What is the original branch name in those
cases? Is it detached because the user checks out a remote ref or a
tag (and which one)?
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a remote ref or a tag is checked out, HEAD is automatically
detached. There is no user-friendly way to find out what ref is
checked out in this case. This patch digs in reflog for this
information and shows "HEAD detached from origin/master" or "HEAD
detached at v1.8.0" instead of "currently not on any branch".
When it cannot figure out the original ref, it shows an abbreviated
SHA-1. "Currently not on any branch" would never display (unless
reflog is pruned to near empty that the last checkout entry is lost).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbufs are placed outside read_and_strip_branch as a premature
optimization: when it reads "refs/heads/foo" to strbuf and wants to
return just "foo", it could do so without memory movement. In return
the caller must not use the returned pointer after releasing strbufs,
which own the buffers that contain the returned strings. It's a clumsy
design.
By moving strbufs into read_and_strip_branch(), the returned pointer
always points to a malloc'd buffer or NULL. The pointer can be passed
around and freed after use.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The translation of "completed with %d local objects" is put in a
48-byte buffer, which may be enough for English but not true for any
translations. Convert it to use strbuf (i.e. no hard limit on
translation length).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use the function git_deflate_init() -- which wraps the zlib function
deflateInit() -- to initialize compression of ZIP file entries. This
results in compressed data prefixed with a two-bytes long header and
followed by a four-bytes trailer. ZIP file entries consist of ZIP
headers and raw compressed data instead, so we remove the zlib wrapper
before writing the result.
We can ask zlib for the the raw compressed data without the unwanted
parts in the first place by using deflateInit2() and specifying a
negative number of bits to size the window. For that purpose, factor
out the function do_git_deflate_init() and add git_deflate_init_raw(),
which wraps it. Then use the latter in archive-zip.c and get rid of
the code that stripped the zlib header and trailer.
Also rename the helper function zlib_deflate() to zlib_deflate_raw()
to reflect the change.
Thus we avoid generating data that we throw away anyway, the code
becomes shorter and some magic constants are removed.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce advice.statusUoption to suggest considering use of -u to
strike different trade-off when it took more than 2 seconds to
enumerate untracked/ignored files.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some repostories users experience that "git status" command takes
long time. The command spends some time searching the file system
for untracked files.
Explain the trade-off struck by the default choice of `normal` to
help users make an appropriate choice better, before talking about
the configuration variable.
Inspired by Torsten Bögershausen.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When looking up the stream filter, write_entry() should be passing the
path of the file in the repository, not the path to which the content is
going to be written. This allows the file to be correctly looked up
against the .gitattributes files in the working tree.
This change makes the streaming case match the non-streaming case which
passes ce->name to convert_to_working_tree later in the same function.
The two tests added here test the different paths through write_entry
since the CRLF filter is a streaming filter but the user-defined smudge
filter is not streamed.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Description goes on the test_expect_* line
- Open SQ of test goes on the test_expect_* line
- Closing SQ of test goes on its own line
- Use TAB for indent
Also remove three comments that appear to relate to the development of
the patch before it was committed.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The combined diff --cc output does not honor options to ignore
whitespace changes (-b, -w, and --ignore-space-at-eol).
Correct this by passing diff flags to diff engine, so that combined
diff behaves as normal diff does with spaces, and by coalescing
lines that are removed from both (or more) parents, honoring the
same rule to ignore whitespace changes.
With this change, a conflict-less merge done using a ignore-*
strategy option will not show any conflict if shown in combined-diff
using the same option.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users like to edit files in their diff tool when using "git
difftool --dir-diff --symlink" to compare against the working tree but
difftool currently only created symlinks when a file contains unstaged
changes.
Change this behaviour so that symlinks are created whenever the
right-hand side of the comparison has the same SHA1 as the file in the
working tree.
Note that textconv filters are handled in the same way as by git-diff
and if a clean filter is not the inverse of its smudge filter we already
get a null SHA1 from "diff --raw" and will symlink the file without
going through the new hash-object based check.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we add tests for symlinks in "git difftool --dir-diff" it's easier
to check the target path if we don't have to worry about double slashes
separating directories. Remove the trailing slash (if present) from
$workdir before creating the symlinks in order to avoid this.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous code did not diagnose an incorrectly spelled ":(top"
as an error.
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code assumes that the string ends at either `)` or `,`, and does
not handle the case where strcspn() returns length due to end of
string. So specifying ":(top" as pathspec will cause the loop to go
past the end of string.
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This behavior is due to change in the future, but let's test
it anyway. That helps make sure we do not accidentally
switch the behavior too soon while we are working in the
area, and it means that we can easily verify the change when
we do make it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, with no base, Git gave P4Merge $LOCAL as a dummy base:
p4merge "$LOCAL" "$LOCAL" "$REMOTE" "$MERGED"
Commit 0a0ec7bd changed this to:
p4merge "empty file" "$LOCAL" "$REMOTE" "$MERGED"
to avoid the problem of being unable to save in some circumstances with
similar inputs.
Unfortunately this approach produces much worse results on differing
inputs. P4Merge really regards the blank file as the base, and once you
have just a couple of differences between the two branches you end up
with one a massive full-file conflict. The 3-way diff is not readable,
and you have to invoke "difftool MERGE_HEAD HEAD" manually to get a
useful view.
The original approach appears to have invoked special 2-way merge
behaviour in P4Merge that occurs only if the base filename is "" or
equal to the left input. You get a good visual comparison, and it does
not auto-resolve differences. (Normally if one branch matched the base,
it would autoresolve to the other branch).
But there appears to be no way of getting this 2-way behaviour and being
able to reliably save. Having base==left appears to be triggering other
assumptions. There are tricks the user can use to force the save icon
on, but it's not intuitive.
So we now follow a suggestion given in the original patch's discussion:
generate a virtual base, consisting of the lines common to the two
branches. This is the same as the technique used in resolve and octopus
merges, so we relocate that code to a shared function.
Note that if there are no differences at the same location, this
technique can lead to automatic resolution without conflict, combining
everything from the 2 files. As with the other merges using this
technique, we assume the user will inspect the result before saving.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Reviewed-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reverse LOCAL and REMOTE when invoking P4Merge as a mergetool, so that
the incoming branch is now in the left-hand, blue triangle pane, and the
current branch is in the right-hand, green circle pane.
This change makes use of P4Merge consistent with its built-in help, its
reference documentation, and Perforce itself. But most importantly, it
makes merge results clearer. P4Merge is not totally symmetrical between
left and right; despite changing a few text labels from "theirs/ours" to
"left/right" when invoked manually, it still retains its original
Perforce "theirs/ours" viewpoint.
Most obviously, in the result pane P4Merge shows changes that are common
to both branches in green. This is on the basis of the current branch
being green, as it is when invoked from Perforce; it means that lines in
the result are blue if and only if they are being changed by the merge,
making the resulting diff clearer.
Note that P4Merge now shows "ours" on the right for both diff and merge,
unlike other diff/mergetools, which always have REMOTE on the right.
But observe that REMOTE is the working tree (ie "ours") for a diff,
while it's another branch (ie "theirs") for a merge.
Ours and theirs are reversed for a rebase - see "git help rebase".
However, this does produce the desired "show the results of this commit"
effect in P4Merge - changes that remain in the rebased commit (in your
branch, but not in the new base) appear in blue; changes that do not
appear in the rebased commit (from the new base, or common to both) are
in green. If Perforce had rebase, they'd probably not swap ours/theirs,
but make P4Merge show common changes in blue, picking out our changes in
green. We can't do that, so this is next best.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Reviewed-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git tag --force" mentions what old tag object is being replaced
when it is used to update an existing tag, but it shows the same
message when creating a new one. Stop doing that, as it does not
add any information.
Add a test for this and also to ensure --force can replace tags at
all.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/reflog-reverse-walk:
reflog: add for_each_reflog_ent_reverse() API
for_each_recent_reflog_ent(): simplify opening of a reflog file
for_each_reflog_ent(): extract a helper to process a single entry
The generic chdir() helper sets the PWD environment
variable, as that is what is used by p4 to know its
current working directory. Normally the shell would
do this, but in git-p4, we must do it by hand.
However, when the path contains a symbolic link,
os.getcwd() will return the physical location. If the
p4 client specification includes symlinks, setting PWD
to the physical location causes p4 to think it is not
inside the client workspace. It complains, e.g.
Path /vol/bar/projects/foo/... is not under client root /p/foo
One workaround is to use AltRoots in the p4 client specification,
but it is cleaner to handle it directly in git-p4.
Other uses of chdir still require setting PWD to an
absolute path so p4 features like P4CONFIG work. See
bf1d68f (git-p4: use absolute directory for PWD env
var, 2011-12-09).
[ pw: tweak patch and commit message ]
Thanks-to: John Keeping <john@keeping.me.uk>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test fails when the p4 client root includes
a symlink. It complains:
Path /vol/bar/projects/foo/... is not under client root /p/foo
and dumps a traceback.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorder option list in command-line usage to match the manual page.
Also make it less than 80-characters wide.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent change added functions whose entire standard error stream
is redirected to /dev/null using a construct that is valid POSIX.1
but is not widely used:
funcname () {
cd "$1" && run some command "$2"
} 2>/dev/null
Even though this file is "git-completion.bash", zsh completion
support dot-sources it (instead of asking bash to grok it like tcsh
completion does), and zsh does not implement this redirection
correctly.
With zsh, trying to complete an inexistant directory gave this:
git add no-such-dir/__git_ls_files_helper💿2: no such file or directory: no-such-dir/
Also these functions use "cd" to first go somewhere else before
running a command, but the location the caller wants them to go that
is given as an argument to them should not be affected by CDPATH
variable the users may have set for their interactive session.
To fix both of these, wrap the body of the function in a subshell,
unset CDPATH at the beginning of the subshell, and redirect the
standard error stream of the subshell to /dev/null.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We originally thought the transition would need a period where "git add
[-u|-A]" without pathspec would be forbidden, but the warning is big
enough to scare people and teach them not to use it (or, if so, to
understand the consequences).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-archive relies on get_pathspec to convert its argv into
a list of pathspecs. When get_pathspec is given an empty
argv list, it returns a single pathspec, the empty string,
to indicate that everything matches. When we feed this to
our path_exists function, we typically see that the pathspec
turns up at least one item in the tree, and we are happy.
But when our tree is empty, we erroneously think it is
because the pathspec is too limited, when in fact it is
simply that there is nothing to be found in the tree. This
is a weird corner case, but the correct behavior is almost
certainly to produce an empty archive, not to exit with an
error.
This patch teaches git-archive to create empty archives when
there is no pathspec given (we continue to complain if a
pathspec is given, since it obviously is not matched). It
also confirms that the tar and zip writers produce sane
output in this instance.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We set up the $GIT_UNZIP variable and lazy prereq in
multiple places (and the next patch is about to add another
one). Let's factor it out to avoid repeating ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git help" translated the "See 'git help <command>' for more
information..." message, but "git" didn't.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If I disable git-shell's interactive mode by removing the
~/git-shell-commands directory, attempts to ssh in to the service
produce a message intended for the administrator:
$ ssh git@myserver
fatal: Interactive git shell is not enabled.
hint: ~/git-shell-commands should exist and have read and execute access.
$
That is helpful for the new admin who is wondering "What? Why isn't
the git-shell I just set up working?", but once the site setup is
complete, it would be better to give the user a friendly hint that she
is on the right track, like GitHub does.
Hi <username>! You've successfully authenticated, but
GitHub does not provide shell access.
An appropriate greeting might even include more complex dynamic
information, like gitolite's list of repositories the user has access
to. Add support for a ~/git-shell-commands/no-interactive-login
command that generates an arbitrary greeting. When the user tries to
log in:
* If the file ~/git-shell-commands/no-interactive-login exists,
run no-interactive-login to let the server say what it likes,
then hang up.
* Otherwise, if ~/git-shell-commands/ is present, start an
interactive read-eval-print loop.
* Otherwise, print the usual configuration hint and hang up.
Reported-by: Ethan Reesor <firelizzard@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
