5723fe7 (Avoid cross-directory renames and linking on object creation,
2008-06-14) changed the call to use link() directly instead of through a
custom wrapper, but forgot that it returns 0 or -1, not 0 or errno.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is currently no call to git_config at the start of cmd_archive.
When creating tar archives the core config is read as a side-effect of
reading the tar specific config, but this doesn't happen for zip
archives.
The consequence is that in a configuration with core.autocrlf set,
although files in a tar archive are created with crlf line endings,
files in a zip archive retain unix line endings.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Acked-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the unusual case when there is no commit message, gitweb would
output an uninitialized value warning.
Signed-off-by: Joey Hess <joey@kitenet.net>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only part of the hunk header that we can change is the "TEXT"
portion. Additionally, a few grammatical errors have been corrected.
Signed-off-by: Garry Dolley <gdolley@ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apparently do_switch() tolerates the lack of escaping in less
funky branch names. For the really strange and scary ones, we
need to escape them properly. It strangely maintains compatible
with the existing handling of branch names with spaces and
exclamation marks.
Reported-by: m.skoric@web.de ($gmane/94677)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Not doing so caused the "Malformed network data" error when a directoy
was deleted and replaced with a copy from an older version.
Signed-off-by: Alec Berryman <alec@thened.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Textual diff output for unmerged paths was too eager to give condensed
combined diff. Even though "diff -c" (and "diff-files -c -p") is a
request to view combined diff without condensing (otherwise the user would
have explicitly asked for --cc, not -c), we showed "--cc" output anyway.
0fe7c1d (built-in diff: assorted updates, 2006-04-29) claimed to be
careful about doing this, but its breakage was hidden because back then
"git diff" was still a shell script that did not use the codepath it
introduced fully.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we came from git.c the first arg would be "archive".
"git-archive" isn't a bug because cmd_archive() doesn't check
the first arg.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
User notifications are presented as 'git cmd', and code comments
are presented as '"cmd"' or 'git's cmd', rather than 'git-cmd'.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The object oriented version of File::Temp is a rather new incarnation it
seems. The File::Temp man page for v5.8.0 says "(NOT YET IMPLEMENTED)" in
the 'Objects' section. Instead of creating a file with a unique name in
the system TMPDIR, we can create our own temporary file with a static
name and use that instead.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Tested-by: Tom G. Christensen <tgc@statsbiblioteket.dk> on RHEL 3, Perl 5.8.0
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of perl complain when 'STDERR' is used as the third argument
in the 3-argument form of open(). Convert to the 2-argument form which is
described for duping STDERR in my second edition camel book.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Tested-by: Tom G. Christensen <tgc@statsbiblioteket.dk> on RHEL 3, Perl 5.8.0
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 3632cfc24 makes the same change for Darwin; however, the problem
also exists on FreeBSD.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This augments 3632cfc24 (Use compatibility regex library on Darwin,
2008-09-07), which already carries a "Tested-by" statement for AIX,
but that test was actually done with this patch included.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Tested-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard libc regex library on OSX does not support alternation
in POSIX Basic Regular Expression mode. This breaks the diff.funcname
functionality on OSX.
To fix this, we use the GNU regex library which is already present in
the compat/ diretory for the MinGW port. However, simply adding compat/
to the COMPAT_CFLAGS variable causes a conflict between the system
fnmatch.h and the one present in compat/. To remedy this, move the
regex and fnmatch functionality to their own subdirectories in compat/
so they can be included seperately.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Tested-by: Mike Ralphson <mike@abacus.co.uk> (AIX)
Tested-by: Johannes Sixt <johannes.sixt@telecom.at> (MinGW)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perl 5.8.0 ships with File::Temp 0.13, which does not have the new()
interface introduced in 0.14, as pointed out by Tom G. Christensen.
This modifies Git.pm to use the more established tempfile() interface
and updates 'git svn' to match.
Signed-off-by: Marcus Griep <marcus@griep.us>
Acked-by: Eric Wong <normalperson@yhbt.net>
Tested-by: Tom G. Christensen <tgc@statsbiblioteket.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should make the output more readable (by default using diff -u)
when some tests fail.
Also changed the diff order from "current expected" to "expected
current".
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* np/maint-safer-pack:
fixup_pack_header_footer(): use nicely aligned buffer sizes
index-pack: use fixup_pack_header_footer()'s validation mode
pack-objects: use fixup_pack_header_footer()'s validation mode
improve reliability of fixup_pack_header_footer()
pack-objects: improve returned information from write_one()
The logic to checkout a different commit implements the safety to never
lose user's local changes. For example, switching from a commit to
another commit, when you have changed a path that is different between
them, need to merge your changes to the version from the switched-to
commit, which you may not necessarily be able to resolve easily. By
default, "git checkout" refused to switch branches, to give you a chance
to stash your local changes (or use "-m" to merge, accepting the risks of
getting conflicts).
This safety, however, had one deliberate hole since early June 2005. When
your local change was to remove a path (and optionally to stage that
removal), the command checked out the path from the switched-to commit
nevertheless.
This was to allow an initial checkout to happen smoothly (e.g. an initial
checkout is done by starting with an empty index and switching from the
commit at the HEAD to the same commit). We can tighten the rule slightly
to allow this special case to pass, without losing sight of removal
explicitly done by the user, by noticing if the index is truly empty when
the operation begins.
For historical background, see:
http://thread.gmane.org/gmane.comp.version-control.git/4641/focus=4646
This case is marked as *0* in the message, which both Linus and I said "it
feels somewhat wrong but otherwise we cannot start from an empty index".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two patches 9907721 (templates/Makefile: don't depend on local umask
setting, 2008-02-28) and 96cda0b (templates/Makefile: install is
unnecessary, just use mkdir -p, 2008-08-21) tried to prevent an overtight
umask the builder/installer might have from screwing over the installation
procedure, but we forgot there was another source of trouble. If the
person who checked out the source tree had an overtight umask, it will
leak out to the built products, which is propagated to the installation
destination.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --continue" issued after git rebase being stop by "edit"
command is trying to amend the last commit using stage changes. However,
if the last commit is not the commit that was marked as "edit" then it
can produce unexpected results.
For instance, after being stop by "edit", I have made some changes to
commit message using "git commit --amend". After that I realized that
I forgot to add some changes to some file. So, I said "git add file"
and the "git rebase --continue". Unfortunately, it caused that the new
commit message was lost.
Another problem is that after being stopped at "edit", the user adds new
commits. In this case, automatic amend behavior of git rebase triggered
by some stage changes causes that not only that the log message of the
last commit is lost but that it will contain also wrong Author and Date
information.
Therefore, this patch restrict automatic amend only to the situation
where HEAD is the commit at which git rebase stop by "edit" command.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
User notifications are presented as 'git cmd', and code comments
are presented as '"cmd"' or 'git's cmd', rather than 'git-cmd'.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git rebase interactive is stopped by "edit" command and then the user
said "git rebase --continue" while having some stage changes, git rebase
interactive is trying to amend the last commit by doing:
git --soft reset && git commit
However, the user can abort commit for some reason by providing an empty
log message, and that would leave the last commit undone, while the user
being completely unaware about what happened. Now if the user tries to
continue, by issuing "git rebase --continue" that squashes two previous
commits.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally from Mike Hommey; earlier we were disabling SSL_VERIFYPEER
but SSL_VERIFYHOST was in effect even when the user asked not to with
the environment variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of --quiet was to return the status as early as possible without
doing any extra processing. Well behaved scripts, when they expect to run
many diff operations inside, are supposed to run "update-index --refresh"
upfront; we do not want them to pay the price of iterating over the index
and comparing the contents to fix the stat dirtiness, and we avoided most
of the processing in diffcore_std() when --quiet is in effect.
But scripts that adhere to the good practice won't have to pay any more
price than the necessary lstat(2) that will report stat cleanliness, as
long as only -q is given without any fancier diff options.
More importantly, users who do ask for "--quiet -M --filter=D" (in order
to notice only the deletion, not paths that disappeared only because they
have been renamed away) deserve to get the result they asked for, even it
means they have to pay the extra price; the alternative is to get a cheap
early return that gives a result they did not ask for, which is much
worse.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we enabled the automatic refreshing of the index to "diff" Porcelain,
we disabled it when --find-copies-harder was asked, but there is no good
reason to do so. In the following command sequence, the first "diff"
shows an "empty" diff exposing stat dirtyness, while the second one does
not.
$ >foo
$ git add foo
$ touch foo
$ git diff -C -C
$ git diff -C
This fixes the inconsistency.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike the case where the user does have a real change in the work tree,
refusing to work because of unclean stat information is not very helpful.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Nanako Shiraishi <nanako3@lavabit.com>
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Fix diff parsing for lines starting with "--" or "++"
git-gui: Fix string escaping in po2msg.sh
git gui: show diffs with a minimum of 1 context line
git-gui: update all remaining translations to French.
git-gui: Update french translation
When somebody is reading git-blame.txt (or git-annotate.txt) for the first
time, the message we would like to send is:
(1) Here is why you would want to use this command, what it can do
(perhaps more than what you would have expected from "$scm blame"),
and how you tell it to do what it does.
This is obvious.
(2) You might have heard of the command with the other name. There is no
difference between the two, except they differ in their default
output formats.
This is essential to answer: "git has both? how are they different?"
(3) We tend to encourage blame over annotate for new scripts and new
people, but there is no reason to choose one over the other.
This is not as important as (2), but would be useful to avoid
repeated questions about "when will we start deprecating this?"
As long as we describe (2) on git-annotate page clearly enough, people who
read git-blame page first and get curious can refer to git-annotate page.
While at it, subtly hint (3) without being overly explicit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason to have a separate variable cmd_is_annotate;
OUTPUT_ANNOTATE_COMPAT option is supposed to produce the compatibility
output, and we should produce the same output even when the command was
not invoked as "annotate" but as "blame -c".
Noticed by Pasky.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we tried to find commits done by AUTHOR, the first implementation
tried to pattern match a line with "^author .*AUTHOR", which later was
enhanced to strip leading caret and look for "^author AUTHOR" when the
search pattern was anchored at the left end (i.e. --author="^AUTHOR").
This had a few problems:
* When looking for fixed strings (e.g. "git log -F --author=x --grep=y"),
the regexp internally used "^author .*x" would never match anything;
* To match at the end (e.g. "git log --author='google.com>$'"), the
generated regexp has to also match the trailing timestamp part the
commit header lines have. Also, in order to determine if the '$' at
the end means "match at the end of the line" or just a literal dollar
sign (probably backslash-quoted), we would need to parse the regexp
ourselves.
An earlier alternative tried to make sure that a line matches "^author "
(to limit by field name) and the user supplied pattern at the same time.
While it solved the -F problem by introducing a special override for
matching the "^author ", it did not solve the trailing timestamp nor tail
match problem. It also would have matched every commit if --author=author
was asked for, not because the author's email part had this string, but
because every commit header line that talks about the author begins with
that field name, regardleses of who wrote it.
Instead of piling more hacks on top of hacks, this rethinks the grep
machinery that is used to look for strings in the commit header, and makes
sure that (1) field name matches literally at the beginning of the line,
followed by a SP, and (2) the user supplied pattern is matched against the
remainder of the line, excluding the trailing timestamp data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Languages like Lua and SQL use "--" to mark a line as commented out.
If this appears at column 0 and is part of the pre-image we may see
"--- foo" in the diff, indicating that the line whose content is
"-- foo" has been removed from the new version.
git-gui was incorrectly parsing "--- foo" as the old file name
in the file header, causing it to generate a bad patch file when
the user tried to stage or unstage a hunk or the selected line.
We need to keep track of where we are in the parsing so that we do
not misread a deletion or addition record as part of the header.
Reported-by: Alexander Gladysh <agladysh@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The option used to be implemented as if it is a totally independent one,
but "git diff --cumulative" would not mean anything without "--dirstat".
This makes --cumulative imply --dirstat.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git <tab><tab> still shows way too many commands, some of them
are clearly plumbing. This patch hides the plumbing commands
liberally (that is, in special cases, users still might want to
call one of the hidden commands, a *normal* workflow should never
involve these, though - and if it does, we have a UI problem anyway).
Signed-off-by: Petr Baudis <pasky@suse.cz>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ho/dashless:
tests: use "git xyzzy" form (t7200 - t9001)
tests: use "git xyzzy" form (t7000 - t7199)
tests: use "git xyzzy" form (t3600 - t6999)
tests: use "git xyzzy" form (t0000 - t3599)
'git foo' program identifies itself without dash in die() messages
Start conforming code to "git subcmd" style
