The ll_binary_merge() function assumes that the ancestor blob is
different from either side of the new versions, and always fails
the merge in conflict, unless -Xours or -Xtheirs is in effect.
The normal "merge" machineries all resolve the trivial cases
(e.g. if our side changed while their side did not, the result
is ours) without triggering the file-level merge drivers, so the
assumption is warranted.
The code path in "git apply --3way", however, does not check for
the trivial three-way merge situation and always calls the
file-level merge drivers. This used to be perfectly OK back
when we always first attempted a straight patch application and
used the three-way code path only as a fallback. Any binary
patch that can be applied as a trivial three-way merge (e.g. the
patch is based exactly on the version we happen to have) would
always cleanly apply, so the ll_binary_merge() that is not
prepared to see the trivial case would not have to handle such a
case.
This no longer is true after we made "--3way" to mean "first try
three-way and then fall back to straight application", and made
"git apply -3" on a binary patch that is based on the current
version no longer apply.
Teach "git apply -3" to first check for the trivial merge cases
and resolve them without hitting the file-level merge drivers.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
[jc: stolen tests from Jerry's patch]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line completion updates.
* fc/completion-updates:
completion: bash: add correct suffix in variables
completion: bash: fix for multiple dash commands
completion: bash: fix for suboptions with value
completion: bash: fix prefix detection in branch.*
Various bugs in "git rebase -r" have been fixed.
* pw/rebase-r-fixes:
rebase -r: fix merge -c with a merge strategy
rebase -r: don't write .git/MERGE_MSG when fast-forwarding
rebase -i: add another reword test
rebase -r: make 'merge -c' behave like reword
Checking out all the paths from HEAD during the last conflicted
step in "git rebase" and continuing would cause the step to be
skipped (which is expected), but leaves MERGE_MSG file behind in
$GIT_DIR and confuses the next "git commit", which has been
corrected.
* pw/rebase-skip-final-fix:
rebase --continue: remove .git/MERGE_MSG
rebase --apply: restore some tests
t3403: fix commit authorship
"git commit --fixup" now works with "--edit" again, after it was
broken in v2.32.
* jk/commit-edit-fixup-fix:
commit: restore --edit when combined with --fixup
The revision traversal API has been optimized by taking advantage
of the commit-graph, when available, to determine if a commit is
reachable from any of the existing refs.
* ps/connectivity-optim:
revision: avoid hitting packfiles when commits are in commit-graph
commit-graph: split out function to search commit position
revision: stop retrieving reference twice
connected: do not sort input revisions
revision: separate walk and unsorted flags
When executing git-update-ref(1) with the `--stdin` flag, then the user
can queue updates and, since e48cf33b61 (update-ref: implement
interactive transaction handling, 2020-04-02), interactively drive the
transaction's state via a set of transactional verbs. This interactivity
is somewhat broken though: while the caller can use these verbs to drive
the transaction's state, the status messages which confirm that a verb
has been processed is not flushed. The caller may thus be left hanging
waiting for the acknowledgement.
Fix the bug by flushing stdout after writing the status update. Add a
test which catches this bug.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These new performance tests demonstrate effectively the same behavior as
p5310, but use a multi-pack bitmap instead of a single-pack one.
Notably, p5326 does not create a MIDX bitmap with multiple packs. This
is so we can measure a direct comparison between it and p5310. Any
difference between the two is measuring just the overhead of using MIDX
bitmaps.
Here are the results of p5310 and p5326 together, measured at the same
time and on the same machine (using a Xenon W-2255 CPU):
Test HEAD
------------------------------------------------------------------------
5310.2: repack to disk 96.78(93.39+11.33)
5310.3: simulated clone 9.98(9.79+0.19)
5310.4: simulated fetch 1.75(4.26+0.19)
5310.5: pack to file (bitmap) 28.20(27.87+8.70)
5310.6: rev-list (commits) 0.41(0.36+0.05)
5310.7: rev-list (objects) 1.61(1.54+0.07)
5310.8: rev-list count with blob:none 0.25(0.21+0.04)
5310.9: rev-list count with blob:limit=1k 2.65(2.54+0.10)
5310.10: rev-list count with tree:0 0.23(0.19+0.04)
5310.11: simulated partial clone 4.34(4.21+0.12)
5310.13: clone (partial bitmap) 11.05(12.21+0.48)
5310.14: pack to file (partial bitmap) 31.25(34.22+3.70)
5310.15: rev-list with tree filter (partial bitmap) 0.26(0.22+0.04)
versus the same tests (this time using a multi-pack index):
Test HEAD
------------------------------------------------------------------------
5326.2: setup multi-pack index 78.99(75.29+11.58)
5326.3: simulated clone 11.78(11.56+0.22)
5326.4: simulated fetch 1.70(4.49+0.13)
5326.5: pack to file (bitmap) 28.02(27.72+8.76)
5326.6: rev-list (commits) 0.42(0.36+0.06)
5326.7: rev-list (objects) 1.65(1.58+0.06)
5326.8: rev-list count with blob:none 0.26(0.21+0.05)
5326.9: rev-list count with blob:limit=1k 2.97(2.86+0.10)
5326.10: rev-list count with tree:0 0.25(0.20+0.04)
5326.11: simulated partial clone 5.65(5.49+0.16)
5326.13: clone (partial bitmap) 12.22(13.43+0.38)
5326.14: pack to file (partial bitmap) 30.05(31.57+7.25)
5326.15: rev-list with tree filter (partial bitmap) 0.24(0.20+0.04)
There is slight overhead in "simulated clone", "simulated partial
clone", and "clone (partial bitmap)". Unsurprisingly, that overhead is
due to using the MIDX's reverse index to map between bit positions and
MIDX positions.
This can be reproduced by running "git repack -adb" along with "git
multi-pack-index write --bitmap" in a large-ish repository. Then run:
$ perf record -o pack.perf git -c core.multiPackIndex=false \
pack-objects --all --stdout >/dev/null </dev/null
$ perf record -o midx.perf git -c core.multiPackIndex=true \
pack-objects --all --stdout >/dev/null </dev/null
and compare the two with "perf diff -c delta -o 1 pack.perf midx.perf".
The most notable results are below (the next largest positive delta is
+0.14%):
# Event 'cycles'
#
# Baseline Delta Shared Object Symbol
# ........ ....... .................. ..........................
#
+5.86% git [.] nth_midxed_offset
+5.24% git [.] nth_midxed_pack_int_id
3.45% +0.97% git [.] offset_to_pack_pos
3.30% +0.57% git [.] pack_pos_to_offset
+0.30% git [.] pack_pos_to_midx
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new p5326 introduced by the next patch will want these same tests,
interjecting its own setup in between. Move them out so that both perf
tests can reuse them.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP' environment
variable to also write a multi-pack bitmap when
'GIT_TEST_MULTI_PACK_INDEX' is set.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A number of these tests are focused only on pack-based bitmaps and need
to be updated to disable 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP' where
necessary.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test is specifically about generating a midx still respecting a
pack-based bitmap file. Generating a MIDX bitmap would confuse the test.
Let's override the 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP' variable to
make sure we don't do so.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generating a MIDX bitmap confuses many of the tests in t5310, which
expect to control whether and how bitmaps are written. Since the
relevant MIDX-bitmap tests here are covered already in t5326, let's just
disable the flag for the whole t5310 script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generating a MIDX bitmap causes tests which repack in a partial clone to
fail because they are missing objects. Missing objects is an expected
component of tests in t0410, so disable this knob altogether. Graceful
degradation when writing a bitmap with missing objects is tested in
t5326.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces a new test, t5326, which tests the basic
functionality of multi-pack bitmaps.
Some trivial behavior is tested, such as:
- Whether bitmaps can be generated with more than one pack.
- Whether clones can be served with all objects in the bitmap.
- Whether follow-up fetches can be served with some objects outside of
the server's bitmap
These use lib-bitmap's tests (which in turn were pulled from t5310), and
we cover cases where the MIDX represents both a single pack and multiple
packs.
In addition, some non-trivial and MIDX-specific behavior is tested, too,
including:
- Whether multi-pack bitmaps behave correctly with respect to the
pack-reuse machinery when the base for some object is selected from
a different pack than the delta.
- Whether multi-pack bitmaps correctly respect the
pack.preferBitmapTips configuration.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subsequent tests will want to check for the existence of a multi-pack
bitmap which matches the multi-pack-index stored in the pack directory.
The multi-pack bitmap includes the hex checksum of the MIDX it
corresponds to in its filename (for example,
'$packdir/multi-pack-index-<checksum>.bitmap'). As a result, some tests
want a way to learn what '<checksum>' is.
This helper addresses that need by printing the checksum of the
repository's multi-pack-index.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'll soon be adding a test script that will cover many of the same
bitmap concepts as t5310, but for MIDX bitmaps. Let's pull out as many
of the applicable tests as we can so we don't have to rewrite them.
There should be no functional change to t5310; we still run the same
operations in the same order.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Opening multiple instance of the same MIDX can lead to problems like two
separate packed_git structures which represent the same pack being added
to the repository's object store.
The above scenario can happen because prepare_midx_pack() checks if
`m->packs[pack_int_id]` is NULL in order to determine if a pack has been
opened and installed in the repository before. But a caller can
construct two copies of the same MIDX by calling get_multi_pack_index()
and load_multi_pack_index() since the former manipulates the
object store directly but the latter is a lower-level routine which
allocates a new MIDX for each call.
So if prepare_midx_pack() is called on multiple MIDXs with the same
pack_int_id, then that pack will be installed twice in the object
store's packed_git pointer.
This can lead to problems in, for e.g., the pack-bitmap code, which does
something like the following (in pack-bitmap.c:open_pack_bitmap()):
struct bitmap_index *bitmap_git = ...;
for (p = get_all_packs(r); p; p = p->next) {
if (open_pack_bitmap_1(bitmap_git, p) == 0)
ret = 0;
}
which is a problem if two copies of the same pack exist in the
packed_git list because pack-bitmap.c:open_pack_bitmap_1() contains a
conditional like the following:
if (bitmap_git->pack || bitmap_git->midx) {
/* ignore extra bitmap file; we can only handle one */
warning("ignoring extra bitmap file: %s", packfile->pack_name);
close(fd);
return -1;
}
Avoid this scenario by not letting write_midx_internal() open a MIDX
that isn't also pointed at by the object store. So long as this is the
case, other routines should prefer to open MIDXs with
get_multi_pack_index() or reprepare_packed_git() instead of creating
instances on their own. Because get_multi_pack_index() returns
`r->object_store->multi_pack_index` if it is non-NULL, we'll only have
one instance of a MIDX open at one time, avoiding these problems.
To encourage this, drop the `struct multi_pack_index *` parameter from
`write_midx_internal()`, and rely instead on the `object_dir` to find
(or initialize) the correct MIDX instance.
Likewise, replace the call to `close_midx()` with
`close_object_store()`, since we're about to replace the MIDX with a new
one and should invalidate the object store's memory of any MIDX that
might have existed beforehand.
Note that this now forbids passing object directories that don't belong
to alternate repositories over `--object-dir`, since before we would
have happily opened a MIDX in any directory, but now restrict ourselves
to only those reachable by `r->objects->multi_pack_index` (and alternate
MIDXs that we can see by walking the `next` pointer).
As far as I can tell, supporting arbitrary directories with
`--object-dir` was a historical accident, since even the documentation
says `<alt>` when referring to the value passed to this option.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The soon-to-be-implemented multi-pack bitmap treats object in the first
bit position specially by assuming that all objects in the pack it was
selected from are also represented from that pack in the MIDX. In other
words, the pack from which the first object was selected must also have
all of its other objects selected from that same pack in the MIDX in
case of any duplicates.
But this assumption relies on the fact that there is at least one object
in that pack to begin with; otherwise the object in the first bit
position isn't from a preferred pack, in which case we can no longer
assume that all objects in that pack were also selected from the same
pack.
Guard this assumption by checking the number of objects in the given
preferred pack, and failing if the given pack is empty.
To make sure we can safely perform this check, open any packs which are
contained in an existing MIDX via prepare_midx_pack(). The same is done
for new packs via the add_pack_to_midx() callback, but packs picked up
from a previous MIDX will not yet have these opened.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If using --object-dir to point into an object directory which belongs to
a different repository than the one in the current working directory,
such as:
git init repo
git -C repo ... # add some objects
cd alternate
git multi-pack-index --object-dir ../repo/.git/objects write
the binary will segfault trying to access the object-dir via the repo it
found, but that's not fully initialized. Worse, if we later call
clear_midx_files_ext(), we will use `the_repository` and remove files
out of the wrong object directory.
Fix this by using the given object_dir (or the object directory of
`the_repository` if `--object-dir` wasn't given) to properly to clean up
the *.rev files, avoiding the crash.
Original-patch-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The multi-pack-index command supports working with arbitrary object
directories via the `--object-dir` flag. Though this has historically
worked in arbitrary repositories (including when the command itself was
run outside of a Git repository), this has been somewhat of an accident.
For example, running:
git multi-pack-index write --object-dir=/path/to/repo/objects
outside of a Git repository causes a BUG(). This is because the
top-level `cmd_multi_pack_index()` function stops parsing when it sees
"write", and then fills in the default object directory (the result of
calling `get_object_directory()`) before handing off to
`cmd_multi_pack_index_write()`. But there is no repository to
initialize, and so calling `get_object_directory()` results in a BUG()
(indicating that the current repository is not initialized).
Another case where this doesn't quite work as expected is when operating
in a SHA-256 repository. To see the failure, try this in your shell:
git init --object-format=sha256 repo
git -C repo commit --allow-empty base
git -C repo repack -d
git multi-pack-index --object-dir=$(pwd)/repo/.git/objects write
and observe that we cannot open the `.idx` file in "repo", because the
outermost process assumes that any repository that it works in also uses
the default value of `the_hash_algo` (at the time of writing, SHA-1).
There may be compelling reasons for trying to work around these bugs,
but working in arbitrary `--object-dir`'s is non-standard enough (and
likewise, these bugs prevalent enough) that I don't think any workflows
would be broken by abandoning this behavior.
Accordingly, restrict the `multi-pack-index` builtin to only work when
inside of a Git repository (i.e., its main utility becomes selecting
which alternate to operate in), which avoids both of the bugs above.
(Note that you can still trigger a bug when writing a MIDX in an
alternate which does not use the same object format as the repository
which it is an alternate of, but that is an unrelated bug to this one).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'upload-pack' runs within the context of a git namespace, treat any
'want-ref' lines the client sends as relative to that namespace.
Also check if the wanted ref is hidden via 'hideRefs'. If it is hidden,
respond with an error as if the ref didn't exist.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Kim Altintop <kim@eagain.st>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Assembling a "raw" fetch command to be fed directly to "test-tool serve-v2"
is extracted into a test helper.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kim Altintop <kim@eagain.st>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"enum" keyword will be introduced in PHP 8.1.
https://wiki.php.net/rfc/enumerations
Signed-off-by: USAMI Kenta <tadsan@zonu.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7f40759496 (fast-export: tighten anonymize_mem() interface to
handle only strings, 2020-06-23) changed the interface used in anonymizing
strings, but failed to update the size of annotated tag messages to match
the new anonymized string.
As a result, exporting tags having messages longer than 13 characters
would create output that couldn't be parsed by fast-import,
as the data length indicated was larger than the data output.
Reset the message size when anonymizing, and add a tag with a "long"
message to the test.
Signed-off-by: Tal Kelrich <hasturkun@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have ever initialized a submodule, open_submodule will open it.
If you then delete the submodule's worktree directory (but don't
remove it from .gitmodules), git diff --submodule=diff would error out
as it attempted to chdir into the now-deleted working tree directory.
This only matters if the submodules git dir is absorbed. If not, then
we no longer have anywhere to run the diff. But that case does not
trigger this error, because in that case, open_submodule fails, so we
don't resolve a left commit, so we exit early, which is the only thing
we could do.
If absorbed, then we can run the diff from the submodule's absorbed
git dir (.git/modules/sm2). In practice, that's a bit more
complicated, because `git diff` expects to be run from inside a
working directory, not a git dir. So it looks in the config for
core.worktree, and does chdir("../../../sm2"), which is the very dir
that we're trying to avoid visiting because it's been deleted. We
work around this by setting GIT_WORK_TREE (and GIT_DIR) to ".". It is
little weird to set GIT_WORK_TREE to something that is not a working
tree just to avoid an unnecessary chdir, but it works.
Signed-off-by: David Turner <dturner@twosigma.com
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bring the "commit-graph" command in line with the error output and
general pattern in cmd_multi_pack_index().
Let's test for that output, and also cover the same potential bug as
was fixed in the multi-pack-index command in
88617d11f9 (multi-pack-index: fix potential segfault without
sub-command, 2021-07-19).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the parse_options() invocation in the commit-graph code to
error on unknown leftover argv elements, in addition to the existing
and implicit erroring via parse_options() on unknown options.
We'd already error in cmd_commit_graph() on e.g.:
git commit-graph unknown verify
git commit-graph --unknown verify
But here we're calling parse_options() twice more for the "write" and
"verify" subcommands. We did not do the same checking for leftover
argv elements there. As a result we'd silently accept garbage in these
subcommands, let's not do that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current implementation of GIT_TEST_FAIL_PREREQS is broken in
that checking for the lack of a prerequisite would not work. Avoid
the use of "if ! test_have_prereq X" in a test script.
* bc/t5607-avoid-broken-test-fail-prereqs:
t5607: avoid using prerequisites to select algorithm
"git apply" miscounted the bytes and failed to read to the end of
binary hunks.
* jk/apply-binary-hunk-parsing-fix:
apply: keep buffer/size pair in sync when parsing binary hunks
"git pull" had various corner cases that were not well thought out
around its --rebase backend, e.g. "git pull --ff-only" did not stop
but went ahead and rebased when the history on other side is not a
descendant of our history. The series tries to fix them up.
* en/pull-conflicting-options:
pull: fix handling of multiple heads
pull: update docs & code for option compatibility with rebasing
pull: abort by default when fast-forwarding is not possible
pull: make --rebase and --no-rebase override pull.ff=only
pull: since --ff-only overrides, handle it first
pull: abort if --ff-only is given and fast-forwarding is impossible
t7601: add tests of interactions with multiple merge heads and config
t7601: test interaction of merge/rebase/fast-forward flags and options
Based on current experience, when running git clone --recurse-submodules,
developers do not expect other commands such as pull or checkout to run
recursively into active submodules. However, setting submodule.recurse=true
at this step could make for a simpler workflow by eliminating the need for
the --recurse-submodules option in subsequent commands. To collect more
data on developers' preference in regards to making submodule.recurse=true
a default config value in the future, deploy this feature under the opt in
submodule.stickyRecursiveClone flag.
Signed-off-by: Mahi Kolla <mkolla2@illinois.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If multiple independent patches are sent with send-email, even if the
"In-Reply-To" and "References" headers are not managed by --thread or
--in-reply-to, their values may be propagated from prior patches to
subsequent patches with no such headers defined.
To mitigate this and potential future issues, make sure all global
patch-specific variables are always either handled by
command-specific code (e.g. threading), or are reset to their default
values for every iteration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every once in a while a test somehow manages to escape from its trash
directory and modifies the surrounding repository, whether because of
a bug in git itself, a bug in a test [1], or e.g. when trying to run
tests with a shell that is, in general, unable to run our tests [2].
Set GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY/.." as an additional
safety measure to protect the surrounding repository at least from
modifications by git commands executed in the tests (assuming that
handling of ceiling directories during repository discovery is not
broken, and, of course, it won't save us from regular shell commands,
e.g. 'cd .. && rm -f ...').
[1] e.g. https://public-inbox.org/git/20210423051255.GD2947267@szeder.dev
[2] $ git symbolic-ref HEAD
refs/heads/master
$ ksh ./t2011-checkout-invalid-head.sh
[... a lot of "not ok" ...]
$ git symbolic-ref HEAD
refs/heads/other
(In short: 'ksh' doesn't support the 'local' builtin command,
which is used by 'test_oid', causing it to return with error
whenever it's called, leaving ZERO_OID set to empty, so when the
test 'checkout main from invalid HEAD' runs 'echo $ZERO_OID
>.git/HEAD' it writes a corrupt (not invalid) HEAD, and subsequent
git commands don't recognize the repository in the trash directory
anymore, but operate on the surrounding repo.)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git branch only allows deleting branches that point to valid commits.
Skip that check if --force is given, as the caller is indicating with
it that they know what they are doing and accept the consequences.
This allows deleting dangling branches, which previously had to be
reset to a valid start-point using --force first.
Reported-by: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user asks for a pretty-printed commit to be converted (either
explicitly with --encoding=foo, or implicitly because the commit is
non-utf8 and we want to convert it), we pass it through iconv(). If that
fails, we fall back to showing the input verbatim, but don't tell the
user that the output may be bogus.
Let's add a warning to do so, along with a mention in the documentation
for --encoding. Two things to note about the implementation:
- we could produce the warning closer to the call to iconv() in
reencode_string_len(), which would let us relay the value of errno.
But this is not actually very helpful. reencode_string_len() does
not know we are operating on a commit, and indeed does not know that
the caller won't produce an error of its own. And the errno values
from iconv() are seldom helpful (iconv_open() only ever produces
EINVAL; perhaps EILSEQ from iconv() might be illuminating, but it
can also return EINVAL for incomplete sequences).
- if the reason for the failure is that the output charset is not
supported, then the user will see this warning for every commit we
try to display. That might be ugly and overwhelming, but on the
other hand it is making it clear that every one of them has not been
converted (and the likely outcome anyway is to re-try the command
with a supported output encoding).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'Filtering contents...' progress report from delayed checkout is
displayed even when checkout and clone are invoked with --quiet or
--no-progress. Furthermore, it is displayed unconditionally, without
first checking whether stdout is a tty. Let's fix these issues and also
add some regression tests for the two code paths that currently use
delayed checkout: unpack_trees.c:check_updates() and
builtin/checkout.c:checkout_worktree().
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git column's '--nl' option can be used to specify a "string to be
printed at the end of each line" (quoting the man page), but this
option and its mandatory argument has been parsed as OPT_INTEGER since
the introduction of the command in 7e29b8254f (Add column layout
skeleton and git-column, 2012-04-21). Consequently, any non-number
argument is rejected by parse-options, and any number other than 0
leads to segfault:
$ printf "%s\n" one two |git column --mode=plain --nl=foo
error: option `nl' expects a numerical value
$ printf "%s\n" one two |git column --mode=plain --nl=42
Segmentation fault (core dumped)
$ printf "%s\n" one two |git column --mode=plain --nl=0
one
two
Parse this option as OPT_STRING.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For diff family commands, we can tell them to exclude changes outside
of some directories if --relative is requested.
In diff_unmerge(), NULL will be returned if the requested path is
outside of the interesting directories, thus we'll run into NULL
pointer dereference in run_diff_files when trying to dereference
its return value.
Checking for return value of diff_unmerge before dereferencing
is not sufficient, though. Since, diff engine will try to work on such
pathspec later.
Let's not run diff on those unintesting entries, instead.
As a side effect, by skipping like that, we can save some CPU cycles.
Reported-by: Thomas De Zeeuw <thomas@slight.dev>
Tested-by: Carlo Arenas <carenas@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In test_atom(), we're piping the output of cat-file to tail(1),
thus, losing its exit status.
Let's use a temporary file to preserve git exit status code.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t6300, some tests are guarded behind some prerequisites.
Thus, objects created by those tests ain't available if those
prerequisites are unsatistified. Attempting to run "cat-file"
on those objects will run into failure.
In fact, running t6300 in an environment without gpg(1),
we'll see those warnings:
fatal: Not a valid object name refs/tags/signed-empty
fatal: Not a valid object name refs/tags/signed-short
fatal: Not a valid object name refs/tags/signed-long
Let's put those commands into the real tests, in order to:
* skip their execution if prerequisites aren't satistified.
* check their exit status code
The expected value for objects with type: commit needs to be
computed outside the test because we can't rely on "$3" there.
Furthermore, to prevent the accidental usage of that computed
expected value, BUG out on unknown object's type.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0696232390 (pack-redundant: fix crash when one packfile in repo,
2020-12-16) added one some new tests to t5323. At the time, the sub-repo
we used was called "master". But in a parallel branch, this was switched
to "main".
When the latter branch was merged in 27d7c8599b (Merge branch
'js/default-branch-name-tests-final-stretch', 2021-01-25), some of those
spots caused textual conflicts, but some (for tests that were far enough
away from other changed code) were just semantic. The merge resolution
fixed up most spots, but missed this one.
Even though this did impact actual code, it turned out not to fail the
tests. Running 'cd "$master_repo"' ended up staying in the same
directory, running the test in the main trash repo instead of the
sub-repo. But because the point of the test is checking behavior when
there are no packfiles, it worked in either repo (since both are empty
at this point in the script).
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bugfix for common ancestor negotiation recently introduced in "git
push" code path.
* jt/push-negotiation-fixes:
fetch: die on invalid --negotiation-tip hash
send-pack: fix push nego. when remote has refs
send-pack: fix push.negotiate with remote helper
trace2 logs learned to show parent process name to see in what
context Git was invoked.
* es/trace2-log-parent-process-name:
tr2: log parent process name
tr2: make process info collection platform-generic
A handful of tests that assumed implementation details of files
backend for refs have been cleaned up.
* hn/refs-test-cleanup:
t6001: avoid direct file system access
t6500: use "ls -1" to snapshot ref database state
t7064: use update-ref -d to remove upstream branch
t1410: mark test as REFFILES
t1405: mark test for 'git pack-refs' as REFFILES
t1405: use 'git reflog exists' to check reflog existence
t2402: use ref-store test helper to create broken symlink
t3320: use git-symbolic-ref rather than filesystem access
t6120: use git-update-ref rather than filesystem access
t1503: mark symlink test as REFFILES
t6050: use git-update-ref rather than filesystem access
Pathname expansion (like "~username/") learned a way to specify a
location relative to Git installation (e.g. its $sharedir which is
$(prefix)/share), with "%(prefix)".
* js/expand-runtime-prefix:
expand_user_path: allow in-flight topics to keep using the old name
interpolate_path(): allow specifying paths relative to the runtime prefix
Use a better name for the function interpolating paths
expand_user_path(): clarify the role of the `real_home` parameter
expand_user_path(): remove stale part of the comment
tests: exercise the RUNTIME_PREFIX feature
Prepare the "ref-filter" machinery that drives the "--format"
option of "git for-each-ref" and its friends to be used in "git
cat-file --batch".
* zh/ref-filter-raw-data:
ref-filter: add %(rest) atom
ref-filter: use non-const ref_format in *_atom_parser()
ref-filter: --format=%(raw) support --perl
ref-filter: add %(raw) atom
ref-filter: add obj-type check in grab contents
Input validation of "git pack-objects --stdin-packs" has been
corrected.
* ab/pack-stdin-packs-fix:
pack-objects: fix segfault in --stdin-packs option
pack-objects tests: cover blindspots in stdin handling
"git add" can work better with the sparse index.
* ds/add-with-sparse-index:
add: remove ensure_full_index() with --renormalize
add: ignore outside the sparse-checkout in refresh()
pathspec: stop calling ensure_full_index
add: allow operating on a sparse-only index
t1092: test merge conflicts outside cone
Set packet_trace_identity() for ls-remote. This replaces the generic
"git" identity in GIT_TRACE_PACKET=<file> traces to "ls-remote", e.g.:
[...] packet: upload-pack> version 2
[...] packet: upload-pack> agent=git/2.32.0-dev
[...] packet: ls-remote< version 2
[...] packet: ls-remote< agent=git/2.32.0-dev
Where in an "git ls-remote file://<path>" dialog ">" is the sender (or
"to the server") and "<" is the recipient (or "received by the
client").
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On macOS, we use launchctl to manage the background maintenance
schedule. This uses a set of .plist files to describe the schedule, but
these files are also registered with 'launchctl bootstrap'. If multiple
'git maintenance start' commands run concurrently, then they can collide
replacing these schedule files and registering them with launchctl.
To avoid extra launchctl commands, do a check for the .plist files on
disk and check if they are registered using 'launchctl list <name>'.
This command will return with exit code 0 if it exists, or exit code 113
if it does not.
We can test this behavior using the GIT_TEST_MAINT_SCHEDULER environment
variable.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, $(pwd) returns a drive-letter style path C:/foo, while $PWD
contains a POSIX style /c/foo path. When we want to interpolate the
current directory in the PATH variable, we must not use the C:/foo style,
because the meaning of the colon is ambiguous. Use the POSIX style.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable D is never defined in test t5582, more severely the test
fails if D is defined by something outside the test suite, so remove
this spurious line.
Signed-off-by: Mickey Endito <mickey.endito.2323@protonmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The set of objects covered by a bitmap must be closed under
reachability, since it must be the case that there is a valid bit
position assigned for every possible reachable object (otherwise the
bitmaps would be incomplete).
Pack bitmaps are never written from 'git repack' unless repacking
all-into-one, and so we never write non-closed bitmaps (except in the
case of partial clones where we aren't guaranteed to have all objects).
But multi-pack bitmaps change this, since it isn't known whether the
set of objects in the MIDX is closed under reachability until walking
them. Plumb through a bit that is set when a reachable object isn't
found.
As soon as a reachable object isn't found in the set of objects to
include in the bitmap, bitmap_writer_build() knows that the set is not
closed, and so it now fails gracefully.
A test is added in t0410 to trigger a bitmap write without full
reachability closure by removing local copies of some reachable objects
from a promisor remote.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick", upon seeing a conflict, says:
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit'
as if running "git commit" to conclude the resolution of
this single step were the end of the story. This stems from
the fact that the command originally was to pick a single
commit and not a range of commits, and the message was
written back then and has not been adjusted.
When picking a range of commits and the command stops with a
conflict in the middle of the range, however, after
resolving the conflict and (optionally) recording the result
with "git commit", the user has to run "git cherry-pick
--continue" to have the rest of the range dealt with,
"--skip" to drop the current commit, or "--abort" to discard
the series.
Suggest use of "git cherry-pick --continue/--skip/--abort"
so that the message also covers the case where a range of
commits are being picked.
Similarly, this optimization can be applied to git revert,
suggest use of "git revert --continue/--skip/--abort" so
that the message also covers the case where a range of
commits are being reverted.
It is worth mentioning that now we use advice() to print
the content of GIT_CHERRY_PICK_HELP in print_advice(), each
line of output will start with "hint: ".
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a rebase is started with a --strategy option other than "ort" or
"recursive" then "merge -c" does not allow the user to reword the
commit message.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fast-forwarding we do not create a new commit so .git/MERGE_MSG
is not removed and can end up seeding the message of a commit made
after the rebase has finished. Avoid writing .git/MERGE_MSG when we
are fast-forwarding by writing the file after the fast-forward
checks. Note that there are no changes to the fast-forward code, it is
simply moved.
Note that the way this change is implemented means we no longer write
the author script when fast-forwarding either. I believe this is safe
for the reasons below but it is a departure from what we do when
fast-forwarding a non-merge commit. If we reword the merge then 'git
commit --amend' will keep the authorship of the commit we're rewording
as it ignores GIT_AUTHOR_* unless --reset-author is passed. It will
also export the correct GIT_AUTHOR_* variables to any hooks and we
already test the authorship of the reworded commit. If we are not
rewording then we no longer call spilt_ident() which means we are no
longer checking the commit author header looks sane. However this is
what we already do when fast-forwarding non-merge commits in
skip_unnecessary_picks() so I don't think we're breaking any promises
by not checking the author here.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
None of the existing reword tests check that there are no uncommitted
changes when the editor is opened. Reuse the editor script from the
last commit to fix this omission.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user runs git log while rewording a commit it is confusing if
sometimes we're amending the commit that's being reworded and at other
times we're creating a new commit depending on whether we could
fast-forward or not[1]. For this reason the reword command ensures
that there are no uncommitted changes when rewording. The reword
command also allows the user to edit the todo list while the rebase is
paused. As 'merge -c' also rewords commits make it behave like reword
and add a test.
[1] https://lore.kernel.org/git/xmqqlfvu4be3.fsf@gitster-ct.c.googlers.com/T/#m133009cb91cf0917bcf667300f061178be56680a
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to ignore options that don't start with -- as well.
Depending on the value of COMP_WORDBREAKS the last word could be
duplicated otherwise.
Can be tested with:
git merge -X diff-algorithm=<tab>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent changes to --fixup, adding amend suboption, caused the
--edit flag to be ignored as use_editor was always set to zero.
Restore edit_flag having higher priority than fixup_message when
deciding the value of use_editor by moving the edit flag condition
later in the method.
Signed-off-by: Joel Klinghed <the_jk@spawned.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user skips the final commit by removing all the changes from
the index and worktree with 'git restore' (or read-tree) and then runs
'git rebase --continue' .git/MERGE_MSG is left behind. This will seed
the commit message the next time the user commits which is not what we
want to happen.
Reported-by: Victor Gambier <vgambier@excilys.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
980b482d28 ("rebase tests: mark tests specific to the am-backend with
--am", 2020-02-15) sought to prepare tests testing the "apply" backend
in preparation for 2ac0d6273f ("rebase: change the default backend
from "am" to "merge"", 2020-02-15). However some tests seem to have
been missed leading to us testing the "merge" backend twice. This
patch fixes some cases that I noticed while adding tests to these
files, I have not audited all the other rebase test files. I've
reworded a couple of the test descriptions to make it clear which
backend they are testing.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Setting GIT_AUTHOR_* when committing with --amend will only change the
author if we also pass --reset-author. This commit is used in some
tests that ensure the author ident does not change when rebasing.
Creating this commit without changing the authorship meant that the
test would not catch regressions that caused rebase to discard the
original authorship information.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this test, we currently use the SHA1 prerequisite to specify the
algorithm we're using to test, since SHA-256 bundles are always v3,
whereas SHA-1 bundles default to v2, and as a result the default output
differs.
However, this causes a problem if we run with GIT_TEST_FAIL_PREREQS set,
since that means that we'll unexpectedly fail the SHA1 prerequisite,
resulting in incorrect expected output. Let's fix this by checking
against the built-in data called "algo", which tells us which algorithm
is in use. This should work in any situation, making our test a little
more robust.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier "git log -m" was changed to always produce patch output,
which would break existing scripts, which has been reverted.
* jn/log-m-does-not-imply-p:
Revert 'diff-merges: let "-m" imply "-p"'
Currently, the git diff hunk headers show the wrong method signature if the
method has a qualified return type, an array return type, or a generic return
type because the regex doesn't allow dots (.), [], or < and > in the return
type. Also, type parameter declarations couldn't be matched.
Add several t4018 tests asserting the right hunk headers for different cases:
- enum constant change
- change in generic method with bounded type parameters
- change in generic method with wildcard
- field change in a nested class
Signed-off-by: Tassilo Horn <tsdh@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ds/add-with-sparse-index:
add: remove ensure_full_index() with --renormalize
add: ignore outside the sparse-checkout in refresh()
pathspec: stop calling ensure_full_index
add: allow operating on a sparse-only index
t1092: test merge conflicts outside cone
It is useful for performance monitoring and debugging purposes to know
the wire protocol used for remote operations. This may differ from the
version set in local configuration due to differences in version and/or
configuration between the server and the client. Therefore, log the
negotiated wire protocol version via trace2, for both clients and
servers.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We parse through binary hunks by looping through the buffer with code
like:
llen = linelen(buffer, size);
...do something with the line...
buffer += llen;
size -= llen;
However, before we enter the loop, there is one call that increments
"buffer" but forgets to decrement "size". As a result, our "size" is off
by the length of that line, and subsequent calls to linelen() may look
past the end of the buffer for a newline.
The fix is easy: we just need to decrement size as we do elsewhere.
This bug goes all the way back to 0660626caf (binary diff: further
updates., 2006-05-05). Presumably nobody noticed because it only
triggers if the patch is corrupted, and even then we are often "saved"
by luck. We use a strbuf to store the incoming patch, so we overallocate
there, plus we add a 16-byte run of NULs as slop for memory comparisons.
So if this happened accidentally, the common case is that we'd just read
a few uninitialized bytes from the end of the strbuf before producing
the expected "this patch is corrupted" error complaint.
However, it is possible to carefully construct a case which reads off
the end of the buffer. The included test does so. It will pass both
before and after this patch when run normally, but using a tool like
ASan shows that we get an out-of-bounds read before this patch, but not
after.
Reported-by: Xingman Chen <xichixingman@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit f5bfcc823b, which
made "git log -m" imply "--patch" by default. The logic was that
"-m", which makes diff generation for merges perform a diff against
each parent, has no use unless I am viewing the diff, so we could save
the user some typing by turning on display of the resulting diff
automatically. That wasn't expected to adversely affect scripts
because scripts would either be using a command like "git diff-tree"
that already emits diffs by default or would be combining -m with a
diff generation option such as --name-status. By saving typing for
interactive use without adversely affecting scripts in the wild, it
would be a pure improvement.
The problem is that although diff generation options are only relevant
for the displayed diff, a script author can imagine them affecting
path limiting. For example, I might run
git log -w --format=%H -- README
hoping to list commits that edited README, excluding whitespace-only
changes. In fact, a whitespace-only change is not TREESAME so the use
of -w here has no effect (since we don't apply these diff generation
flags to the diff_options struct rev_info::pruning used for this
purpose), but the documentation suggests that it should work
Suppose you specified foo as the <paths>. We shall call
commits that modify foo !TREESAME, and the rest TREESAME. (In
a diff filtered for foo, they look different and equal,
respectively.)
and a script author who has not tested whitespace-only changes
wouldn't notice.
Similarly, a script author could include
git log -m --first-parent --format=%H -- README
to filter the first-parent history for commits that modified README.
The -m is a no-op but it reflects the script author's intent. For
example, until 1e20a407fe (stash list: stop passing "-m" to "git
log", 2021-05-21), "git stash list" did this.
As a result, we can't safely change "-m" to imply "-p" without fear of
breaking such scripts. Restore the previous behavior.
Noticed because Rust's src/bootstrap/bootstrap.py made use of this
same construct: https://github.com/rust-lang/rust/pull/87513. That
script has been updated to omit the unnecessary "-m" option, but we
can expect other scripts in the wild to have similar expectations.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to compute whether objects reachable from a set of tips are all
connected, we do a revision walk with these tips as positive references
and `--not --all`. `--not --all` will cause the revision walk to load
all preexisting references as uninteresting, which can be very expensive
in repositories with many references.
Benchmarking the git-rev-list(1) command highlights that by far the most
expensive single phase is initial sorting of the input revisions: after
all references have been loaded, we first sort commits by author date.
In a real-world repository with about 2.2 million references, it makes
up about 40% of the total runtime of git-rev-list(1).
Ultimately, the connectivity check shouldn't really bother about the
order of input revisions at all. We only care whether we can actually
walk all objects until we hit the cut-off point. So sorting the input is
a complete waste of time.
Introduce a new "--unsorted-input" flag to git-rev-list(1) which will
cause it to not sort the commits and adjust the connectivity check to
always pass the flag. This results in the following speedups, executed
in a clone of gitlab-org/gitlab [1]:
Benchmark #1: git rev-list --objects --quiet --not --all --not $(cat newrev)
Time (mean ± σ): 7.639 s ± 0.065 s [User: 7.304 s, System: 0.335 s]
Range (min … max): 7.543 s … 7.742 s 10 runs
Benchmark #2: git rev-list --unsorted-input --objects --quiet --not --all --not $newrev
Time (mean ± σ): 4.995 s ± 0.044 s [User: 4.657 s, System: 0.337 s]
Range (min … max): 4.909 s … 5.048 s 10 runs
Summary
'git rev-list --unsorted-input --objects --quiet --not --all --not $(cat newrev)' ran
1.53 ± 0.02 times faster than 'git rev-list --objects --quiet --not --all --not $newrev'
[1]: https://gitlab.com/gitlab-org/gitlab.git. Note that not all refs
are visible to clients.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c49a177bec (test-lib.sh: set COLUMNS=80 for --verbose
repeatability, 2021-06-29) multiple tests have been failing when using
bash 5 because checkwinsize is enabled by default, therefore COLUMNS is
reset using TIOCGWINSZ even for non-interactive shells.
It's debatable whether or not bash should even be doing that, but for
now we can avoid this undesirable behavior by disabling this option.
Reported-by: Fabian Stelzer <fabian.stelzer@campoint.net>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
[jc: with SZEDER Gábor's suggestion to do this before setting COLUMNS]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --advertise-refs documentation in git-upload-pack added in
9812f2136b (upload-pack.c: use parse-options API, 2016-05-31) hasn't
been entirely true ever since v2 support was implemented in
e52449b672 (connect: request remote refs using v2, 2018-03-15). Under
v2 we don't advertise the refs at all, but rather dump the
capabilities header.
This option has always been an obscure internal implementation detail,
it wasn't even documented for git-receive-pack. Since it has exactly
one user let's rename it to --http-backend-info-refs, which is more
accurate and points the reader in the right direction. Let's also
cross-link this from the protocol v1 and v2 documentation.
I'm retaining a hidden --advertise-refs alias in case there's any
external users of this, and making both options hidden to the bash
completion (as with most other internal-only options).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "advertise capabilities" mode of serve.c added in
ed10cb952d (serve: introduce git-serve, 2018-03-15) is only used by
the http-backend.c to call {upload,receive}-pack with the
--advertise-refs parameter. See 42526b478e (Add stateless RPC options
to upload-pack, receive-pack, 2009-10-30).
Let's just make cmd_upload_pack() take the two (v2) or three (v2)
parameters the the v2/v1 servicing functions need directly, and pass
those in via the function signature. The logic of whether daemon mode
is implied by the timeout belongs in the v1 function (only used
there).
Once we split up the "advertise v2 refs" from "serve v2 request" it
becomes clear that v2 never cared about those in combination. The only
time it mattered was for v1 to emit its ref advertisement, in that
case we wanted to emit the smart-http-only "no-done" capability.
Since we only do that in the --advertise-refs codepath let's just have
it set "do_done" itself in v1's upload_pack() just before send_ref(),
at that point --advertise-refs and --stateless-rpc in combination are
redundant (the only user is get_info_refs() in http-backend.c), so we
can just pass in --advertise-refs only.
Since we need to touch all the serve() and advertise_capabilities()
codepaths let's rename them to less clever and obvious names, it's
been suggested numerous times, the latest of which is [1]'s suggestion
for protocol_v2_serve_loop(). Let's go with that.
1. https://lore.kernel.org/git/CAFQ2z_NyGb8rju5CKzmo6KhZXD0Dp21u-BbyCb2aNxLEoSPRJw@mail.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --advertise-refs option had no explicit tests of its own, only
other http tests that would fail at a distance if it it was
broken. Let's test its behavior explicitly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows rmdir() equivalent behaves differently from POSIX ones in
that when used on a symbolic link that points at a directory, the
target directory gets removed, which has been corrected.
* tb/mingw-rmdir-symlink-to-directory:
mingw: align symlinks-related rmdir() behavior with Linux
The local changes stashed by "git merge --autostash" were lost when
the merge failed in certain ways, which has been corrected.
* pb/merge-autostash-more:
merge: apply autostash if merge strategy fails
merge: apply autostash if fast-forward fails
Documentation: define 'MERGE_AUTOSTASH'
merge: add missing word "strategy" to a message
Further optimization on "merge -sort" backend.
* en/ort-perf-batch-14:
merge-ort: restart merge with cached renames to reduce process entry cost
merge-ort: avoid recursing into directories when we don't need to
merge-ort: defer recursing into directories when merge base is matched
merge-ort: add a handle_deferred_entries() helper function
merge-ort: add data structures for allowable trivial directory resolves
merge-ort: add some more explanations in collect_merge_info_callback()
merge-ort: resolve paths early when we have sufficient information
Rewrite of "git submodule" in C continues.
* ar/submodule-add:
submodule: drop unused sm_name parameter from show_fetch_remotes()
submodule--helper: introduce add-clone subcommand
submodule--helper: refactor module_clone()
submodule: prefix die messages with 'fatal'
t7400: test failure to add submodule in tracked path
When performing a rebase, rmdir() is called on the folder .git/logs. On
Unix rmdir() exits without deleting anything in case .git/logs is a
symbolic link but the equivalent functions on Windows (_rmdir, _wrmdir
and RemoveDirectoryW) do not behave the same and remove the folder if it
is symlinked even if it is not empty.
This creates issues when folders in .git/ are symlinks which is
especially the case when git-repo[1] is used: It replaces `.git/logs/`
with a symlink.
One such issue is that the _target_ of that symlink is removed e.g.
during a `git rebase`, where `delete_reflog("REBASE_HEAD")` will not
only try to remove `.git/logs/REBASE_HEAD` but then recursively try to
remove the parent directories until an error occurs, a technique that
obviously relies on `rmdir()` refusing to remove a symlink.
This was reported in https://github.com/git-for-windows/git/issues/2967.
This commit updates mingw_rmdir() so that its behavior is the same as
Linux rmdir() in case of symbolic links.
To verify that Git does not regress on the reported issue, this patch
adds a regression test for the `git rebase` symptom, even if the same
`rmdir()` behavior is quite likely to cause potential problems in other
Git commands as well.
[1]: git-repo is a python tool built on top of Git which helps manage
many Git repositories. It stores all the .git/ folders in a central
place by taking advantage of symbolic links.
More information: https://gerrit.googlesource.com/git-repo/
Signed-off-by: Thomas Bétous <tomspycell@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
24c30e0b6 (wt-status: tolerate dangling marks, 2020-09-01) adds a test
that uses a BRE which breaks at least with OpenBSD's grep.
switch to an ERE as it is done for similar checks and while at it, remove
the now obsolete test_i18ngrep call.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git read-tree" had a codepath where blobs are fetched one-by-one
from the promisor remote, which has been corrected to fetch in bulk.
* jt/bulk-prefetch:
cache-tree: prefetch in partial clone read-tree
unpack-trees: refactor prefetching code
By doing ls -1 .git/{reftable,refs/heads}, we can capture changes to both
reftable and packed/loose ref storage.
This relies on the fact that git-pack-refs (which we're looking for here)
changes the number (loose/packed storage) and/or names (reftable) files used for
ref storage.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous code tested this by writing $ZERO_OID explicitly in the packed-refs
file. This is a type of corruption that doesn't reflect realistic use-cases. In
addition, even the ref-store test-tool refuses to write invalid OIDs.
(update-ref interprets $ZERO_OID is deleting the ref).
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test takes a lock on the target of a symref, and then verifies that it is
possible to expire the symref's reflog. In reftable, one can only take a global
lock (which would prevent the symref reflog from being expired altogether.)
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests verifies that "pack-refs" causes loose refs to be packed. As both
loose and packed refs are concepts specific to the files backend, mark the test
as REFFILES.
Check the outcome of the pack-refs operation. This was apparently forgotten in
the commit introducing this test: 16feb99d (Mar 26 2017, "t1405: some basic
tests on main ref store").
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With a54e938e5b (strbuf: support long paths w/o read rights in
strbuf_getcwd() on FreeBSD, 2017-03-26) we had t0001 break on systems
like OpenBSD and AIX whose getcwd(3) has standard (but not like glibc
et al) behavior.
This was partially fixed in bed67874e2 (t0001: skip test with
restrictive permissions if getpwd(3) respects them, 2017-08-07).
The problem with that fix is that while its analysis of the problem is
correct, it doesn't actually call getcwd(3), instead it invokes "pwd
-P". There is no guarantee that "pwd -P" is going to call getcwd(3),
as opposed to e.g. being a shell built-in.
On AIX under both bash and ksh this test breaks because "pwd -P" will
happily display the current working directory, but getcwd(3) called by
the "git init" we're testing here will fail to get it.
I checked whether clobbering the $PWD environment variable would
affect it, and it didn't. Presumably these shells keep track of their
working directory internally.
There's possible follow-up work here in teaching strbuf_getcwd() to
get the working directory with whatever method "pwd" uses on these
platforms. See [1] for a discussion of that, but let's take the easy
way out here and just skip these tests by fixing the
GETCWD_IGNORES_PERMS prerequisite to match the limitations of
strbuf_getcwd().
1. https://lore.kernel.org/git/b650bef5-d739-d98d-e9f1-fa292b6ce982@web.de/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b243012 (refresh_index(): add flag to ignore SKIP_WORKTREE
entries, 2021-04-08), 'git add --refresh <path>' will output a warning
message when the path is outside the sparse-checkout definition. The
implementation of this warning happened in parallel with the
sparse-index work to add ensure_full_index() calls throughout the
codebase.
Update this loop to have the proper logic that checks to see if the
pathspec is outside the sparse-checkout definition. This avoids the need
to expand the sparse directory entry and determine if the path is
tracked, untracked, or ignored. We simply avoid updating the stat()
information because there isn't even an entry that matches the path!
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The add_pathspec_matches_against_index() focuses on matching a pathspec
to file entries in the index. This already works correctly for its only
use: checking if untracked files exist in the index.
The compatibility checks in t1092 already test that 'git add <dir>'
works for a directory outside of the sparse cone. That provides coverage
for removing this guard.
This finalizes our ability to run 'git add .' without expanding a sparse
index to a full one. This is evidenced by an update to t1092 and by
these performance numbers for p2000-sparse-operations.sh:
Test HEAD~1 HEAD
--------------------------------------------------------------------------------
2000.10: git add . (full-index-v3) 0.37(0.28+0.07) 0.36(0.27+0.06) -2.7%
2000.11: git add . (full-index-v4) 0.33(0.26+0.06) 0.32(0.28+0.05) -3.0%
2000.12: git add . (sparse-index-v3) 0.57(0.53+0.07) 0.06(0.06+0.07) -89.5%
2000.13: git add . (sparse-index-v4) 0.57(0.53+0.07) 0.05(0.03+0.09) -91.2%
While the ~90% improvement is shown by the test results, it is worth
noting that expanding the sparse index was adding overhead in previous
commits. Comparing to the full index case, we see the performance go
from 0.33s to 0.05s, an 85% improvement.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Disable command_requires_full_index for 'git add'. This does not require
any additional removals of ensure_full_index(). The main reason is that
'git add' discovers changes based on the pathspec and the worktree
itself. These are then inserted into the index directly, and calls to
index_name_pos() or index_file_exists() already call expand_to_path() at
the appropriate time to support a sparse-index.
Add a test to check that 'git add -A' and 'git add <file>' does not
expand the index at all, as long as <file> is not within a sparse
directory. This does not help the global 'git add .' case.
We can measure the improvement using p2000-sparse-operations.sh with
these results:
Test HEAD~1 HEAD
------------------------------------------------------------------------------
2000.6: git add -A (full-index-v3) 0.35(0.30+0.05) 0.37(0.29+0.06) +5.7%
2000.7: git add -A (full-index-v4) 0.31(0.26+0.06) 0.33(0.27+0.06) +6.5%
2000.8: git add -A (sparse-index-v3) 0.57(0.53+0.07) 0.05(0.04+0.08) -91.2%
2000.9: git add -A (sparse-index-v4) 0.58(0.55+0.06) 0.05(0.05+0.06) -91.4%
While the 91% improvement seems impressive, it's important to recognize
that previously we had significant overhead for expanding the
sparse-index. Comparing to the full index case, 'git add -A' goes from
0.37s to 0.05s, which is "only" an 86% improvement.
This modification to 'git add' creates some behavior change depending on
the use of a sparse index. We modify a test in t1092 to demonstrate
these changes which will be remedied in future changes.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conflicts can occur outside of the sparse-checkout definition, and in
that case users might try to resolve the conflicts in several ways.
Document a few of these ways in a test. Make it clear that this behavior
is not necessarily the optimal flow, since users can become confused
when Git deletes these files from the worktree in later commands.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"TEST_OUTPUT_DIRECTORY=there make test" failed to work, which has
been corrected.
* ps/t0000-output-directory-fix:
t0000: fix test if run with TEST_OUTPUT_DIRECTORY
The code that gives an error message in "git multi-pack-index" when
no subcommand is given tried to print a NULL pointer as a strong,
which has been corrected.
* tb/reverse-midx:
multi-pack-index: fix potential segfault without sub-command
The completion support used to offer alternate spelling of options
that exist only for compatibility, which has been corrected.
* pb/dont-complete-aliased-options:
parse-options: don't complete option aliases by default
"git status" codepath learned to work with sparsely populated index
without hydrating it fully.
* ds/status-with-sparse-index:
t1092: document bad sparse-checkout behavior
fsmonitor: integrate with sparse index
wt-status: expand added sparse directory entries
status: use sparse-index throughout
status: skip sparse-checkout percentage with sparse-index
diff-lib: handle index diffs with sparse dirs
dir.c: accept a directory as part of cone-mode patterns
unpack-trees: unpack sparse directory entries
unpack-trees: rename unpack_nondirectories()
unpack-trees: compare sparse directories correctly
unpack-trees: preserve cache_bottom
t1092: add tests for status/add and sparse files
t1092: expand repository data shape
t1092: replace incorrect 'echo' with 'cat'
sparse-index: include EXTENDED flag when expanding
sparse-index: skip indexes with unmerged entries
Tests that cover protocol bits have been updated and helpers
used there have been consolidated.
* ab/pkt-line-tests:
test-lib-functions: use test-tool for [de]packetize()
Many "printf"-like helper functions we have have been annotated
with __attribute__() to catch placeholder/parameter mismatches.
* ab/attribute-format:
advice.h: add missing __attribute__((format)) & fix usage
*.h: add a few missing __attribute__((format))
*.c static functions: add missing __attribute__((format))
sequencer.c: move static function to avoid forward decl
*.c static functions: don't forward-declare __attribute__
Optimize "git log" for cases where we wasted cycles to load ref
decoration data that may not be needed.
* jk/log-decorate-optim:
load_ref_decorations(): fix decoration with tags
add_ref_decoration(): rename s/type/deco_type/
load_ref_decorations(): avoid parsing non-tag objects
object.h: add lookup_object_by_type() function
object.h: expand docstring for lookup_unknown_object()
log: avoid loading decorations for userformats that don't need it
pretty.h: update and expand docstring for userformat_find_requirements()
"git worktree add --lock" learned to record why the worktree is
locked with a custom message.
* sm/worktree-add-lock:
worktree: teach `add` to accept --reason <string> with --lock
worktree: mark lock strings with `_()` for translation
t2400: clean up '"add" worktree with lock' test
Optimization for repositories with many alternate object store.
* ew/many-alternate-optim:
oidtree: a crit-bit tree for odb_loose_cache
oidcpy_with_padding: constify `src' arg
make object_directory.loose_objects_subdir_seen a bitmap
avoid strlen via strbuf_addstr in link_alt_odb_entry
speed up alt_odb_usable() with many alternates
"git commit --allow-empty-message" won't abort the operation upon
an empty message, but the hint shown in the editor said otherwise.
* hj/commit-allow-empty-message:
commit: remove irrelavent prompt on `--allow-empty-message`
commit: reorganise commit hint strings
Ever since Git learned to detect its install location at runtime, there
was the slightly awkward problem that it was impossible to specify paths
relative to said location.
For example, if a version of Git was shipped with custom SSL
certificates to use, there was no portable way to specify
`http.sslCAInfo`.
In Git for Windows, the problem was "solved" for years by interpreting
paths starting with a slash as relative to the runtime prefix.
However, this is not correct: such paths _are_ legal on Windows, and
they are interpreted as absolute paths in the same drive as the current
directory.
After a lengthy discussion, and an even lengthier time to mull over the
problem and its best solution, and then more discussions, we eventually
decided to introduce support for the magic sequence `%(prefix)/`. If a
path starts with this, the remainder is interpreted as relative to the
detected (runtime) prefix. If built without runtime prefix support, Git
will simply interpolate the compiled-in prefix.
If a user _wants_ to specify a path starting with the magic sequence,
they can prefix the magic sequence with `./` and voilà, the path won't
be expanded.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, we refrained from adding a regression test in 7b6c6496374
(system_path(): Add prefix computation at runtime if RUNTIME_PREFIX set,
2008-08-10), and in 226c0ddd0d (exec_cmd: RUNTIME_PREFIX on some POSIX
systems, 2018-04-10).
The reason was that it was deemed too tricky to test.
Turns out that it is not tricky to test at all: we simply create a
pseudo-root, copy the `git` executable into the `git/` subdirectory of
that pseudo-root, then copy a script into the `libexec/git-core/`
directory and expect that to be picked up.
As long as the trash directory is in a location where binaries can be
executed, this works.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
%(rest) is a atom used for cat-file batch mode, which can split
the input lines at the first whitespace boundary, all characters
before that whitespace are considered to be the object name;
characters after that first run of whitespace (i.e., the "rest"
of the line) are output in place of the %(rest) atom.
In order to let "cat-file --batch=%(rest)" use the ref-filter
interface, add %(rest) atom for ref-filter.
Introduce the reject_atom() to reject the atom %(rest) for
"git for-each-ref", "git branch", "git tag" and "git verify-tag".
Reviewed-by: Jacob Keller <jacob.keller@gmail.com>
Suggected-by: Jacob Keller <jacob.keller@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because the perl language can handle binary data correctly,
add the function perl_quote_buf_with_len(), which can specify
the length of the data and prevent the data from being truncated
at '\0' to help `--format="%(raw)"` support `--perl`.
Reviewed-by: Jacob Keller <jacob.keller@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new formatting option `%(raw)`, which will print the raw
object data without any changes. It will help further to migrate
all cat-file formatting logic from cat-file to ref-filter.
The raw data of blob, tree objects may contain '\0', but most of
the logic in `ref-filter` depends on the output of the atom being
text (specifically, no embedded NULs in it).
E.g. `quote_formatting()` use `strbuf_addstr()` or `*._quote_buf()`
add the data to the buffer. The raw data of a tree object is
`100644 one\0...`, only the `100644 one` will be added to the buffer,
which is incorrect.
Therefore, we need to find a way to record the length of the
atom_value's member `s`. Although strbuf can already record the
string and its length, if we want to replace the type of atom_value's
member `s` with strbuf, many places in ref-filter that are filled
with dynamically allocated mermory in `v->s` are not easy to replace.
At the same time, we need to check if `v->s == NULL` in
populate_value(), and strbuf cannot easily distinguish NULL and empty
strings, but c-style "const char *" can do it. So add a new member in
`struct atom_value`: `s_size`, which can record raw object size, it
can help us add raw object data to the buffer or compare two buffers
which contain raw object data.
Note that `--format=%(raw)` cannot be used with `--python`, `--shell`,
`--tcl`, and `--perl` because if the binary raw data is passed to a
variable in such languages, these may not support arbitrary binary data
in their string variable type.
Reviewed-by: Jacob Keller <jacob.keller@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Helped-by: Bagas Sanjaya <bagasdotme@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Felipe Contreras <felipe.contreras@gmail.com>
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Junio C Hamano <gitster@pobox.com>
Based-on-patch-by: Olga Telezhnaya <olyatelezhnaya@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 'git merge' learned '--autostash' in a03b55530a (merge: teach
--autostash option, 2020-04-07), 'cmd_merge', once it is determined that
we have to create a merge commit, calls 'create_autostash' if
'--autostash' is given.
As explained in a03b55530a, and made more abvious by the tests added in
that commit, the autostash is then applied if the merge succeeds, either
directly or by committing (after conflict resolution or if '--no-commit'
was given), or if the merge is aborted with 'git merge --abort'. In some
other cases, like the user calling 'git reset --merge' or 'git merge
--quit', the autostash is not applied, but saved in the stash list.
However, there exists a scenario that creates an autostash but does not
apply nor save it to the stash list: if the chosen merge strategy
completely fails to handle the merge, i.e. 'try_merge_strategy' returns
2.
Apply the autostash in that case also. An easy way to test that is to
try to merge more than two commits but explicitely ask for the 'recursive'
merge strategy.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 'git merge' learned '--autostash' in a03b55530a (merge: teach
--autostash option, 2020-04-07), 'cmd_merge', in the fast-forward case,
calls 'create_autostash' before calling 'checkout_fast_forward' if
'--autostash' is given.
However, if 'checkout_fast_forward' fails, the autostash is not applied
to the working tree, nor saved in the stash list, since the code simply
calls 'goto done'.
Be more helpful to the user by applying the autostash in that case.
An easy way to test a failing fast-forward is when we are merging a
branch that has a tracked file that conflicts with an untracked file in
the working tree.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git read-tree" checks the existence of the blobs referenced by the
given tree, but does not bulk prefetch them. Add a bulk prefetch.
The lack of prefetch here was noticed at $DAYJOB during a merge
involving some specific commits, but I couldn't find a minimal merge
that didn't also trigger the prefetch in check_updates() in
unpack-trees.c (and in all these cases, the lack of prefetch in
cache-tree.c didn't matter because all the relevant blobs would have
already been prefetched by then). This is why I used read-tree here to
exercise this code path.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to tell who invoked Git - was it invoked manually by a
user via CLI or script? By an IDE? In some cases - like 'repo' tool -
we can influence the source code and set the GIT_TRACE2_PARENT_SID
environment variable from the caller process. In 'repo''s case, that
parent SID is manipulated to include the string "repo", which means we
can positively identify when Git was invoked by 'repo' tool. However,
identifying parents that way requires both that we know which tools
invoke Git and that we have the ability to modify the source code of
those tools. It cannot scale to keep up with the various IDEs and
wrappers which use Git, most of which we don't know about. Learning
which tools and wrappers invoke Git, and how, would give us insight to
decide where to improve Git's usability and performance.
Unfortunately, there's no cross-platform reliable way to gather the name
of the parent process. If procfs is present, we can use that; otherwise
we will need to discover the name another way. However, the process ID
should be sufficient to look up the process name on most platforms, so
that code may be shareable.
Git for Windows gathers similar information and logs it as a "data_json"
event. However, since "data_json" has a variable format, it is difficult
to parse effectively in some languages; instead, let's pursue a
dedicated "cmd_ancestry" event to record information about the ancestry
of the current process and a consistent, parseable way.
Git for Windows also gathers information about more than one generation
of parent. In Linux further ancestry info can be gathered with procfs,
but it's unwieldy to do so. In the interest of later moving Git for
Windows ancestry logging to the 'cmd_ancestry' event, and in the
interest of later adding more ancestry to the Linux implementation - or
of adding this functionality to other platforms which have an easier
time walking the process tree - let's make 'cmd_ancestry' accept an
array of parentage.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the bundle tests to fully compare the expected "git ls-remote"
or "git bundle list-heads" output, instead of merely grepping it.
This avoids subtle regressions in the tests. In
f62e0a39b6 (t5704 (bundle): add tests for bundle --stdin, 2010-04-19)
the "bundle --stdin <rev-list options>" test was added to make sure we
didn't include the tag.
But since the --stdin mode didn't work until 5bb0fd2cab (bundle:
arguments can be read from stdin, 2021-01-11) our grepping of
"master" (later "main") missed the important part of the test.
Namely that we should not include the "refs/tags/tag" tag in that
case. Since the test only grepped for "main" in the output we'd miss a
regression in that code.
So let's use test_cmp instead, and also in the other nearby tests
where it's easy.
This does make things a bit more verbose in the case of the test
that's checking the bundle header, since it's different under SHA1 and
SHA256. I think this makes test easier to follow.
I've got some WIP changes to extend the "git bundle" command to dump
parts of the header out, which are easier to understand if we test the
output explicitly like this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change uses of ":" on the LHS of a ">" to the more commonly used
">file" pattern in t/t5607-clone-bundle.sh.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list" learns to omit the "commit <object-name>" header
lines from the output with the `--no-commit-header` option.
* bc/rev-list-without-commit-line:
rev-list: add option for --pretty=format without header
"git send-email" optimization.
* ab/send-email-optim:
perl: nano-optimize by replacing Cwd::cwd() with Cwd::getcwd()
send-email: move trivial config handling to Perl
perl: lazily load some common Git.pm setup code
send-email: lazily load modules for a big speedup
send-email: get rid of indirect object syntax
send-email: use function syntax instead of barewords
send-email: lazily shell out to "git var"
send-email: lazily load config for a big speedup
send-email: copy "config_regxp" into git-send-email.perl
send-email: refactor sendemail.smtpencryption config parsing
send-email: remove non-working support for "sendemail.smtpssl"
send-email tests: test for boolean variables without a value
send-email tests: support GIT_TEST_PERL_FATAL_WARNINGS=true
With multiple heads, we should not allow rebasing or fast-forwarding.
Make sure any fast-forward request calls out specifically the fact that
multiple branches are in play. Also, since we cannot fast-forward to
multiple branches, fix our computation of can_ff.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have for some time shown a long warning when the user does not
specify how to reconcile divergent branches with git pull. Make it an
error now.
Initial-patch-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the last few precedence tests failing in t7601 by now implementing
the logic to have --[no-]rebase override a pull.ff=only config setting.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the "check_sub_test_lib_test()" and its sister functions to a new
lib-subtest.sh.
In the future (not in this series) I'd like to test test-lib's output
in a more targeted and smaller test, and I'll need these functions to
do that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The warning about pulling without specifying how to reconcile divergent
branches says that after setting pull.rebase to true, --ff-only can
still be passed on the command line to require a fast-forward. Make that
actually work.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
[en: updated tests; note 3 fixes and 1 new failure]
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were already code checking that --rebase was incompatible with
a merge of multiple heads. However, we were sometimes throwing warnings
about lack of specification of rebase vs. merge when given multiple
heads. Since rebasing is disallowed with multiple merge heads, that
seems like a poor warning to print; we should instead just assume
merging is wanted.
Add a few tests checking multiple merge head behavior.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interaction of rebase and merge flags and options was not well
tested. Add several tests to check for correct behavior from the
following rules:
* --ff-only vs. --[no-]rebase
(and the related pull.ff=only vs. pull.rebase)
* --rebase[=!false] vs. --no-ff and --ff
(and the related pull.rebase=!false overrides pull.ff=!only)
* command line flags take precedence over config, except:
* --no-rebase heeds pull.ff=!only
* pull.rebase=!false vs --no-ff and --ff
For more details behind these rules and a larger table of individual
cases, refer to https://lore.kernel.org/git/xmqqwnpqot4m.fsf@gitster.g/
and the links found therein.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running unpack_trees() with a sparse index, we attempt to operate
on the index without expanding the sparse directory entries. Thus, we
operate by manipulating entire directories and passing them to the
unpack function. In the case of the 'git checkout' command, this is the
twoway_merge() function.
There are several cases in twoway_merge() that handle different
situations. One new one to add is the case of a directory/file conflict
where the directory is sparse. Before the sparse index, such a conflict
would appear as a list of file additions and deletions. Now,
twoway_merge() initializes 'current', 'oldtree', and 'newtree' from
src[0], src[1], and src[2], then sets 'oldtree' to NULL because it is
equal to the df_conflict_entry. The way to determine that we have a
directory/file conflict is to test that 'current' and 'newtree' disagree
on being sparse directory entries.
When we are in this case, we want to resolve the situation by calling
merged_entry(). This allows replacing the 'current' entry with the
'newtree' entry. This is important for cases where we want to run 'git
checkout' across the conflict and have the new HEAD represent the new
file type at that path. The first NEEDSWORK comment dropped in t1092
demonstrates this necessary behavior.
However, we still are in a confusing state when 'current' corresponds to
a staged change within a sparse directory that is not present at HEAD.
This should be atypical, because it requires adding a change outside of
the sparse-checkout cone, but it is possible. Since we are unable to
determine that this is a staged change within twoway_merge(), we cannot
add a case to reject the merge at this point. I believe this is due to
the use of df_conflict_entry in the place of 'oldtree' instead of using
the valud at HEAD, which would provide some perspective to this
decision. Any change that would allow this differentiation for staged
entries would need to involve information further up in unpack_trees().
That work should be done, sometime, because we are further confusing the
behavior of a directory/file conflict when staging a change in the
directory. The two cases 'checkout behaves oddly with df-conflict-?' in
t1092 demonstrate that even without a sparse-checkout, Git is not
consistent in its behavior. Neither of the two options seems correct,
either. This change makes the sparse-index behave differently than the
typcial sparse-checkout case, but it does match the full checkout
behavior in the df-conflict-2 case.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new branches to the test repo that demonstrate directory/file
conflicts in different ways. Since the directory 'folder1/' has
adjacent files 'folder1-', 'folder1.txt', and 'folder10' it causes
searches for 'folder1/' to land in a different place in the index than a
search for 'folder1'. This causes a change in behavior when working with
the df-conflict-1 and df-conflict-2 branches, whose only difference is
that the first uses 'folder1' as the conflict and the other uses
'folder2' which does not have these adjacent files.
We can extend two tests that compare the behavior across different 'git
checkout' commands, and we see already that the behavior will be
different in some cases and not in others. The difference between the
two test loops is that one uses 'git reset --hard' between iterations.
Further, we isolate the behavior of creating a staged change within a
directory and then checking out a branch where that directory is
replaced with a file. A full checkout behaves differently across these
two cases, while a sparse-checkout cone behaves consistently. In both
cases, the behavior is wrong. In one case, the staged change is dropped
entirely. The other case the staged change is kept, replacing the file
at that location, but none of the other files in the directory are kept.
Likely, the correct behavior in this case is to reject the checkout and
report the conflict, leaving HEAD in its previous location. None of the
cases behave this way currently. Use comments to demonstrate that the
tested behavior is only a documentation of the current, incorrect
behavior to ensure we do not _accidentally_ change it. Instead, we would
prefer to change it on purpose with a future change.
At this point, the sparse-index does not handle these 'git checkout'
commands correctly. Or rather, it _does_ reject the 'git checkout' when
we have the staged change, but for the wrong reason. It also rejects the
'git checkout' commands when there is no staged change and we want to
replace a directory with a file. A fix for that unstaged case will
follow in the next change, but that will make the sparse-index agree
with the full checkout case in these documented incorrect behaviors.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge algorithm mostly consists of the following three functions:
collect_merge_info()
detect_and_process_renames()
process_entries()
Prior to the trivial directory resolution optimization of the last half
dozen commits, process_entries() was consistently the slowest, followed
by collect_merge_info(), then detect_and_process_renames(). When the
trivial directory resolution applies, it often dramatically decreases
the amount of time spent in the two slower functions.
Looking at the performance results in the previous commit, the trivial
directory resolution optimization helps amazingly well when there are no
relevant renames. It also helps really well when reapplying a long
series of linear commits (such as in a rebase or cherry-pick), since the
relevant renames may well be cached from the first reapplied commit.
But when there are any relevant renames that are not cached (represented
by the just-one-mega testcase), then the optimization does not help at
all.
Often, I noticed that when the optimization does not apply, it is
because there are a handful of relevant sources -- maybe even only one.
It felt frustrating to need to recurse into potentially hundreds or even
thousands of directories just for a single rename, but it was needed for
correctness.
However, staring at this list of functions and noticing that
process_entries() is the most expensive and knowing I could avoid it if
I had cached renames suggested a simple idea: change
collect_merge_info()
detect_and_process_renames()
process_entries()
into
collect_merge_info()
detect_and_process_renames()
<cache all the renames, and restart>
collect_merge_info()
detect_and_process_renames()
process_entries()
This may seem odd and look like more work. However, note that although
we run collect_merge_info() twice, the second time we get to employ
trivial directory resolves, which makes it much faster, so the increased
time in collect_merge_info() is small. While we run
detect_and_process_renames() again, all renames are cached so it's
nearly a no-op (we don't call into diffcore_rename_extended() but we do
have a little bit of data structure checking and fixing up). And the
big payoff comes from the fact that process_entries(), will be much
faster due to having far fewer entries to process.
This restarting only makes sense if we can save recursing into enough
directories to make it worth our while. Introduce a simple heuristic to
guide this. Note that this heuristic uses a "wanted_factor" that I have
virtually no actual real world data for, just some back-of-the-envelope
quasi-scientific calculations that I included in some comments and then
plucked a simple round number out of thin air. It could be that
tweaking this number to make it either higher or lower improves the
optimization. (There's slightly more here; when I first introduced this
optimization, I used a factor of 10, because I was completely confident
it was big enough to not cause slowdowns in special cases. I was
certain it was higher than needed. Several months later, I added the
rough calculations which make me think the optimal number is close to 2;
but instead of pushing to the limit, I just bumped it to 3 to reduce the
risk that there are special cases where this optimization can result in
slowing down the code a little. If the ratio of path counts is below 3,
we probably will only see minor performance improvements at best
anyway.)
Also, note that while the diffstat looks kind of long (nearly 100
lines), more than half of it is in two comments explaining how things
work.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 205.1 ms ± 3.8 ms 204.2 ms ± 3.0 ms
mega-renames: 1.564 s ± 0.010 s 1.076 s ± 0.015 s
just-one-mega: 479.5 ms ± 3.9 ms 364.1 ms ± 7.0 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Testcases in t0000 are quite special given that they many of them run
nested testcases to verify that testing functionality itself works as
expected. These nested testcases are realized by writing a new ad-hoc
test script which again sources test-lib.sh, where the new script is
created in a nested subdirectory located beneath the current trash
directory. We then execute the new test script with the nested
subdirectory as current working directory and explicitly re-export
TEST_OUTPUT_DIRECTORY to point to that directory.
While this works as expected in the general case, it falls apart when
the developer has TEST_OUTPUT_DIRECTORY explicitly defined either via
the environment or via config.mak and runs "make test". In that case,
test-lib.sh will clobber the value that we've just carefully set up to
instead contain what the developer has defined. As a result, the
TEST_OUTPUT_DIRECTORY continues to point at the root output directory,
not at the nested one.
This issue causes breakage in the 'test_atexit is run' test case: the
nested test case writes files into "../../", which is assumed to be the
parent's trash directory. But because TEST_OUTPUT_DIRECTORY already
points to to the root output directory, we instead end up writing those
files outside of the output directory. The parent test case will then
try to check whether those files still exist in its own trash directory,
which thus must fail now.
Fix the issue by adding a new TEST_OUTPUT_DIRECTORY_OVERRIDE variable.
If set, then we'll always override the TEST_OUTPUT_DIRECTORY with its
value after sourcing GIT-BUILD-OPTIONS.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since cd57bc41bb (builtin/multi-pack-index.c: display usage on
unrecognized command, 2021-03-30) we have used a "usage" label to avoid
having two separate callers of usage_with_options (one when no arguments
are given, and another for unrecognized sub-commands).
But the first caller has been broken since cd57bc41bb, since it will
happily jump to usage without arguments, and then pass argv[0] to the
"unrecognized subcommand" error.
Many compilers will save us from a segfault here, but the end result is
ugly, since it mentions an unrecognized subcommand when we didn't even
pass one, and (on GCC) includes "(null)" in its output.
Move the "usage" label down past the error about unrecognized
subcommands so that it is only triggered when it should be. While we're
at it, bulk up our test coverage in this area, too.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t0000, we run several fake "sub-test" suites to verify the behavior
of the test suite. But because we don't clear the parent environment
completely, the sub-tests can be fooled by variables meant for the
parent. For example:
GIT_SKIP_TESTS=t1234 ./t0000-basic.sh
fails when a sub-test expects its fake t1234 to actually run. This
particular pattern is unlikely in practice; we're running a single
script, and there is no t1234 in the real test suite anyway (not yet, at
least). A more real-world example is:
GIT_SKIP_TESTS=t[^0]* make test
to run only the t0* tests.
The fix is conceptually simple: we should clear the GIT_SKIP_TESTS
variable when running the sub-tests, because its contents (if any) will
be meant for the main test suite. This is easy to do centrally in our
sub-test helper.
But there's a catch: some of our tests do set GIT_SKIP_TESTS
intentionally to test the feature. We need to allow them to continue to
set it, but clear it for all the other tests. And the sub-test helper
can't tell if the GIT_SKIP_TESTS it sees is from a test or not. We can
handle this by adding a new option to the helper to let callers specify
the skip list.
I considered adding a more general "--eval" option to let callers set up
the env for the sub-test however they like. That would cover this case
and possible future ones. But the quoting gets awkward for the callers
(since we're now 2 layers deep in evals!), so I went with the simpler
more specific solution.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell+perl "[de]packetize()" helper functions were added in
4414a15002 (t/lib-git-daemon: add network-protocol helpers,
2018-01-24), and around the same time we added the "pkt-line" helper
in 74e7002961 (test-pkt-line: introduce a packet-line test helper,
2018-03-14).
For some reason it seems we've mostly used the shell+perl version
instead of the helper since then. There were discussions around
88124ab263 (test-lib-functions: make packetize() more efficient,
2020-03-27) and cacae4329f (test-lib-functions: simplify packetize()
stdin code, 2020-03-29) to improve them and make them more efficient.
There was one good reason to do so, we needed an equivalent of
"test-tool pkt-line pack", but that command wasn't capable of handling
input with "\n" (a feature) or "\0" (just because it happens to be
printf-based under the hood).
Let's add a "pkt-line-raw" helper for that, and expose is at a
packetize_raw() to go with the existing packetize() on the shell
level, this gives us the smallest amount of change to the tests
themselves.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the documentation not to assume users are of certain gender
and adds to guidelines to do so.
* ds/gender-neutral-doc:
*: fix typos
comments: avoid using the gender of our users
doc: avoid using the gender of other people
Prepare the internals for lazily fetching objects in submodules
from their promisor remotes.
* jt/partial-clone-submodule-1:
promisor-remote: teach lazy-fetch in any repo
run-command: refactor subprocess env preparation
submodule: refrain from filtering GIT_CONFIG_COUNT
promisor-remote: support per-repository config
repository: move global r_f_p_c to repo struct
Test clean-up.
* hn/refs-test-cleanup:
t7509: avoid direct file access for writing CHERRY_PICK_HEAD
t1415: avoid direct filesystem access for writing refs
Fill test gaps.
* ab/mktag-tests:
mktag tests: test fast-export
mktag tests: test for-each-ref
mktag tests: test update-ref and reachable fsck
mktag tests: test hash-object --literally and unreachable fsck
mktag tests: invert --no-strict test
mktag tests: parse out options in helper
Fill test gaps.
* ab/show-branch-tests:
show-branch tests: add missing tests
show-branch: don't <COLOR></RESET> for space characters
show-branch tests: modernize test code
show-branch tests: rename the one "show-branch" test file
Code recently added to support common ancestry negotiation during
"git push" did not sanity check its arguments carefully enough.
* ab/fetch-negotiate-segv-fix:
fetch: fix segfault in --negotiate-only without --negotiation-tip=*
fetch: document the --negotiate-only option
send-pack.c: move "no refs in common" abort earlier
When rebuilding the multi-pack index file reusing an existing one,
we used to blindly trust the existing file and ended up carrying
corrupted data into the updated file, which has been corrected.
* tb/midx-use-checksum:
midx: report checksum mismatches during 'verify'
midx: don't reuse corrupt MIDXs when writing
commit-graph: rewrite to use checksum_valid()
csum-file: introduce checksum_valid()
The merge code had funny interactions between content based rename
detection and directory rename detection.
* en/merge-dir-rename-corner-case-fix:
merge-recursive: handle rename-to-self case
merge-ort: ensure we consult df_conflict and path_conflicts
t6423: test directory renames causing rename-to-self
Performance tweaks of "git merge -sort" around lazy fetching of objects.
* en/ort-perf-batch-13:
merge-ort: add prefetching for content merges
diffcore-rename: use a different prefetch for basename comparisons
diffcore-rename: allow different missing_object_cb functions
t6421: add tests checking for excessive object downloads during merge
promisor-remote: output trace2 statistics for number of objects fetched
More fix-ups and optimization to "merge -sort".
* en/ort-perf-batch-12:
merge-ort: miscellaneous touch-ups
Fix various issues found in comments
diffcore-rename: avoid unnecessary strdup'ing in break_idx
merge-ort: replace string_list_df_name_compare with faster alternative
Since 'OPT_ALIAS' was created in 5c387428f1 (parse-options: don't emit
"ambiguous option" for aliases, 2019-04-29), 'git clone
--git-completion-helper', which is used by the Bash completion script to
list options accepted by clone (via '__gitcomp_builtin'), lists both
'--recurse-submodules' and its alias '--recursive', which was not the
case before since '--recursive' had the PARSE_OPT_HIDDEN flag set, and
options with this flag are skipped by 'parse-options.c::show_gitcomp',
which implements 'git <cmd> --git-completion-helper'.
This means that typing 'git clone --recurs<TAB>' will yield both
'--recurse-submodules' and '--recursive', which is not ideal since both
do the same thing, and so the completion should directly complete the
canonical option.
At the point where 'show_gitcomp' is called in 'parse_options_step',
'preprocess_options' was already called in 'parse_options', so any
aliases are now copies of the original options with a modified help text
indicating they are aliases.
Helpfully, since 64cc539fd2 (parse-options: don't leak alias help
messages, 2021-03-21) these copies have the PARSE_OPT_FROM_ALIAS flag
set, so check that flag early in 'show_gitcomp' and do not print them,
unless the user explicitely requested that *all* completion be shown (by
setting 'GIT_COMPLETION_SHOW_ALL'). After all, if we want to encourage
the use of '--recurse-submodules' over '--recursive', we'd better just
suggest the former.
The only other options alias is 'log' and friends' '--mailmap', which is
an alias for '--use-mailmap', but the Bash completion helpers for these
commands do not use '__gitcomp_builtin', and thus are unnaffected by
this change.
Test the new behaviour in t9902-completion.sh. As a side effect, this
also tests the correct behaviour of GIT_COMPLETION_SHOW_ALL, which was
not tested before. Note that since '__gitcomp_builtin' caches the
options it shows, we need to re-source the completion script to clear
that cache for the second test.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default reason stored in the lock file, "added with --lock",
is unlikely to be what the user would have given in a separate
`git worktree lock` command. Allowing `--reason` to be specified
along with `--lock` when adding a working tree gives the user control
over the reason for locking without needing a second command.
Signed-off-by: Stephen Manz <smanz@alum.mit.edu>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a full hexadecimal hash is given as a --negotiation-tip to "git
fetch", and that hash does not correspond to an object, "git fetch" will
segfault if --negotiate-only is given and will silently ignore that hash
otherwise. Make these cases fatal errors, just like the case when an
invalid ref name or abbreviated hash is given.
While at it, mark the error messages as translatable.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 477673d6f3 ("send-pack: support push negotiation", 2021-05-05)
did not test the case in which a remote advertises at least one ref. In
such a case, "remote_refs" in get_commons_through_negotiation() in
send-pack.c would also contain those refs with a zero ref->new_oid (in
addition to the refs being pushed with a nonzero ref->new_oid). Passing
them as negotiation tips to "git fetch" causes an error, so filter them
out.
(The exact error that would happen in "git fetch" in this case is a
segmentation fault, which is unwanted. This will be fixed in the
subsequent commit.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 477673d6f3 ("send-pack: support push negotiation", 2021-05-05)
introduced the push.negotiate config variable and included a test. The
test only covered pushing without a remote helper, so the fact that
pushing with a remote helper doesn't work went unnoticed.
This is ultimately caused by the "url" field not being set in the args
struct. This field being unset probably went unnoticed because besides
push negotiation, this field is only used to generate a "pushee" line in
a push cert (and if not given, no such line is generated). Therefore,
set this field.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous changes did the necessary improvements to unpack-trees.c and
diff-lib.c in order to modify a sparse index based on its comparision
with a tree. The only remaining work is to remove some
ensure_full_index() calls and add tests that verify that the index is
not expanded in our interesting cases. Include 'switch' and 'restore' in
these tests, as they share a base implementation with 'checkout'.
Here are the relevant performance results from
p2000-sparse-operations.sh:
Test HEAD~1 HEAD
--------------------------------------------------------------------------------
2000.18: git checkout -f - (full-v3) 0.49(0.43+0.03) 0.47(0.39+0.05) -4.1%
2000.19: git checkout -f - (full-v4) 0.45(0.37+0.06) 0.42(0.37+0.05) -6.7%
2000.20: git checkout -f - (sparse-v3) 0.76(0.71+0.07) 0.04(0.03+0.04) -94.7%
2000.21: git checkout -f - (sparse-v4) 0.75(0.72+0.04) 0.05(0.06+0.04) -93.3%
It is important to compare the full index case to the sparse index case,
as the previous results for the sparse index were inflated by the index
expansion. For index v4, this is an 88% improvement.
On an internal repository with over two million paths at HEAD and a
sparse-checkout definition containing ~60,000 of those paths, 'git
checkout' went from 3.5s to 297ms with this change. The theoretical
optimum where only those ~60,000 paths exist was 275ms, so the extra
sparse directory entries contribute a 22ms overhead.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update 'git commit' to allow using the sparse-index in memory without
expanding to a full one. The only place that had an ensure_full_index()
call was in cache_tree_update(). The recursive algorithm for
update_one() was already updated in 2de37c536 (cache-tree: integrate
with sparse directory entries, 2021-03-03) to handle sparse directory
entries in the index.
Most of this change involves testing different command-line options that
allow specifying which on-disk changes should be included in the commit.
This includes no options (only take currently-staged changes), -a (take
all tracked changes), and --include (take a list of specific changes).
To simplify testing that these options do not expand the index, update
the test that previously verified that 'git status' does not expand the
index with a helper method, ensure_not_expanded().
This allows 'git commit' to operate much faster when the sparse-checkout
cone is much smaller than the full list of files at HEAD.
Here are the relevant lines from p2000-sparse-operations.sh:
Test HEAD~1 HEAD
----------------------------------------------------------------------------------
2000.14: git commit -a -m A (full-v3) 0.35(0.26+0.06) 0.36(0.28+0.07) +2.9%
2000.15: git commit -a -m A (full-v4) 0.32(0.26+0.05) 0.34(0.28+0.06) +6.3%
2000.16: git commit -a -m A (sparse-v3) 0.63(0.59+0.06) 0.04(0.05+0.05) -93.7%
2000.17: git commit -a -m A (sparse-v4) 0.64(0.59+0.08) 0.04(0.04+0.04) -93.8%
It is important to compare the full-index case to the sparse-index case,
so the improvement for index version v4 is actually an 88% improvement in
this synthetic example.
In a real repository with over two million files at HEAD and 60,000
files in the sparse-checkout definition, the time for 'git commit -a'
went from 2.61 seconds to 134ms. I compared this to the result if the
index only contained the paths in the sparse-checkout definition and
found the theoretical optimum to be 120ms, so the out-of-cone paths only
add a 12% overhead.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By using shorter names for the test repos, we will get a slightly more
compressed performance summary without comprimising clarity.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we increase our list of commands to test in
p2000-sparse-operations.sh, we will want to have a slightly smaller test
repository. Reduce the size by a factor of four by reducing the depth of
the step that creates a big index around a moderately-sized repository.
Also add a step to run 'git checkout -' on repeat. This requires having
a previous location in the reflog, so add that to the initialization
steps.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several situations where a repository with sparse-checkout
enabled will act differently than a normal repository, and in ways that
are not intentional. The test t1092-sparse-checkout-compatibility.sh
documents some of these deviations, but a casual reader might think
these are intentional behavior changes.
Add comments on these tests that make it clear that these behaviors
should be updated. Using 'NEEDSWORK' helps contributors find that these
are potential areas for improvement.
Helped-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we need to expand a sparse-index into a full one, then the FS Monitor
bitmap is going to be incorrect. Ensure that we start fresh at such an
event.
While this is currently a performance drawback, the eventual hope of the
sparse-index feature is that these expansions will be rare and hence we
will be able to keep the FS Monitor data accurate across multiple Git
commands.
These tests are added to demonstrate that the behavior is the same
across a full index and a sparse index, but also that file modifications
to a tracked directory outside of the sparse cone will trigger
ensure_full_index().
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is difficult, but possible, to get into a state where we intend to
add a directory that is outside of the sparse-checkout definition. Add a
test to t1092-sparse-checkout-compatibility.sh that demonstrates this
using a combination of 'git reset --mixed' and 'git checkout --orphan'.
This test failed before because the output of 'git status
--porcelain=v2' would not match on the lines for folder1/:
* The sparse-checkout repo (with a full index) would output each path
name that is intended to be added.
* The sparse-index repo would only output that "folder1/" is staged for
addition.
The status should report the full list of files to be added, and so this
sparse-directory entry should be expanded to a full list when reaching
it inside the wt_status_collect_changes_initial() method. Use
read_tree_at() to assist.
Somehow, this loop over the cache entries was not guarded by
ensure_full_index() as intended.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By testing 'git -c core.fsmonitor= status -uno', we can check for the
simplest index operations that can be made sparse-aware. The necessary
implementation details are already integrated with sparse-checkout, so
modify command_requires_full_index to be zero for cmd_status().
In refresh_index(), we loop through the index entries to refresh their
stat() information. However, sparse directories have no stat()
information to populate. Ignore these entries.
This allows 'git status' to no longer expand a sparse index to a full
one. This is further tested by dropping the "-uno" option and adding an
untracked file into the worktree.
The performance test p2000-sparse-checkout-operations.sh demonstrates
these improvements:
Test HEAD~1 HEAD
-----------------------------------------------------------------------------
2000.2: git status (full-index-v3) 0.31(0.30+0.05) 0.31(0.29+0.06) +0.0%
2000.3: git status (full-index-v4) 0.31(0.29+0.07) 0.34(0.30+0.08) +9.7%
2000.4: git status (sparse-index-v3) 2.35(2.28+0.10) 0.04(0.04+0.05) -98.3%
2000.5: git status (sparse-index-v4) 2.35(2.24+0.15) 0.05(0.04+0.06) -97.9%
Note that since HEAD~1 was expanding the sparse index by parsing trees,
it was artificially slower than the full index case. Thus, the 98%
improvement is misleading, and instead we should celebrate the 0.34s to
0.05s improvement of 85%. This is more indicative of the peformance
gains we are expecting by using a sparse index.
Note: we are dropping the assignment of core.fsmonitor here. This is not
necessary for the test script as we are not altering the config any
other way. Correct integration with FS Monitor will be validated in
later changes.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git status' began reporting a percentage of populated paths when
sparse-checkout is enabled in 051df3cf (wt-status: show sparse
checkout status as well, 2020-07-18). This percentage is incorrect when
the index has sparse directories. It would also be expensive to
calculate as we would need to parse trees to count the total number of
possible paths.
Avoid the expensive computation by simplifying the output to only report
that a sparse checkout exists, without the percentage.
This change is the reason we use 'git status --porcelain=v2' in
t1092-sparse-checkout-compatibility.sh. We don't want to ensure that
this message is equal across both modes, but instead just the important
information about staged, modified, and untracked files are compared.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before moving to update 'git status' and 'git add' to work with sparse
indexes, add an explicit test that ensures the sparse-index works the
same as a normal sparse-checkout when the worktree contains directories
and files outside of the sparse cone.
Specifically, 'folder1/a' is a file in our test repo, but 'folder1' is
not in the sparse cone. When 'folder1/a' is modified, the file is not
shown as modified and adding it will fail. This is new behavior as of
a20f704 (add: warn when asked to update SKIP_WORKTREE entries,
2021-04-08). Before that change, these adds would be silently ignored.
Untracked files are fine: adding new files both with 'git add .' and
'git add folder1/' works just as in a full checkout. This may not be
entirely desirable, but we are not intending to change behavior at the
moment, only document it. A future change could alter the behavior to
be more sensible, and this test could be modified to satisfy the new
expected behavior.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As more features integrate with the sparse-index feature, more and more
special cases arise that require different data shapes within the tree
structure of the repository in order to demonstrate those cases.
Add several interesting special cases all at once instead of sprinkling
them across several commits. The interesting cases being added here are:
* Add sparse-directory entries on both sides of directories within the
sparse-checkout definition.
* Add directories outside the sparse-checkout definition who have only
one entry and are the first entry of a directory with multiple
entries.
* Add filenames adjacent to a sparse directory entry that sort before
and after the trailing slash.
Later tests will take advantage of these shapes, but they also deepen
the tests that already exist.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the test data shape to be as expected, allowing rename
detection to work properly now that the 'larger-content' file actually
has meaningful lines.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-index format is designed to be compatible with merge
conflicts, even those outside the sparse-checkout definition. The reason
is that when converting a full index to a sparse one, a cache entry with
nonzero stage will not be collapsed into a sparse directory entry.
However, this behavior was not tested, and a different behavior within
convert_to_sparse() fails in this scenario. Specifically,
cache_tree_update() will fail when unmerged entries exist.
convert_to_sparse_rec() uses the cache-tree data to recursively walk the
tree structure, but also to compute the OIDs used in the
sparse-directory entries.
Add an index scan to convert_to_sparse() that will detect if these merge
conflict entries exist and skip the conversion before trying to update
the cache-tree. This is marked as NEEDSWORK because this can be removed
with a suitable update to cache_tree_update() or a similar method that
can construct a cache-tree with invalid nodes, but still allow creating
the nodes necessary for creating sparse directory entries.
It is possible that in the future we will not need to make such an
update, since if we do not expand a sparse-index into a full one, this
conversion does not need to happen. Thus, this can be deferred until the
merge machinery is made to integrate with the sparse-index.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 88473c8bae ("load_ref_decorations(): avoid parsing non-tag
objects", 2021-06-22) introduced a shortcut to `add_ref_decoration()`:
Rather than calling `parse_object()`, we go for `oid_object_info()` and
then `lookup_object_by_type()` using the type just discovered. As
detailed in the commit message, this provides a significant time saving.
Unfortunately, it also changes the behavior: We lose all annotated tags
from the decoration.
The reason this happens is in the loop where we try to peel the tags, we
won't necessarily have parsed that first object. If we haven't, its
`tagged` field will be NULL, so we won't actually add a decoration for
the pointed-to object.
Make sure to parse the tag object at the top of the peeling loop. This
effectively restores the pre-88473c8bae parsing -- but only of tags,
allowing us to keep most of the possible speedup from 88473c8bae.
On my big ~220k ref test case (where it's mostly non-tags), the
timings [using "git log -1 --decorate"] are:
- before either patch: 2.945s
- with my broken patch: 0.707s
- with [this patch]: 0.788s
The simplest way to do this is to just conditionally parse before the
loop:
if (obj->type == OBJ_TAG)
parse_object(&obj->oid);
But we can observe that our tag-peeling loop needs to peel already, to
examine recursive tags-of-tags. So instead of introducing a new call to
parse_object(), we can simply move the parsing higher in the loop:
instead of parsing the new object before we loop, parse each tag object
before we look at its "tagged" field.
This has another beneficial side effect: if a tag points at a commit (or
other non-tag type), we do not bother to parse the commit at all now.
And we know it is a commit without calling oid_object_info(), because
parsing the surrounding tag object will have created the correct in-core
object based on the "type" field of the tag.
Our test coverage for --decorate was obviously not good, since we missed
this quite-basic regression. The new tests covers an annotated tag
(showing the fix), but also that we correctly show annotations for
lightweight tags and double-annotated tag-of-tags.
Reported-by: Martin Ågren <martin.agren@gmail.com>
Helped-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- remove unneeded `git rev-parse` which must have come from a copy-paste
of another test
- unlock the worktree with test_when_finished
Signed-off-by: Stephen Manz <smanz@alum.mit.edu>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep --and -e foo" ought to have been diagnosed as an error
but instead segfaulted, which has been corrected.
* rs/grep-parser-fix:
grep: report missing left operand of --and
The "union" conflict resolution variant misbehaved when used with
binary merge driver.
* jk/union-merge-binary:
ll_union_merge(): rename path_unused parameter
ll_union_merge(): pass name labels to ll_xdl_merge()
ll_binary_merge(): handle XDL_MERGE_FAVOR_UNION
Various updates to tests around "git describe"
* ab/describe-tests-fix:
describe tests: support -C in "check_describe"
describe tests: fix nested "test_expect_success" call
describe tests: don't rely on err.actual from "check_describe"
describe tests: refactor away from glob matching
describe tests: improve test for --work-tree & --dirty
Rewrite the backend for "diff -G/-S" to use pcre2 engine when
available.
* ab/pickaxe-pcre2: (22 commits)
xdiff-interface: replace discard_hunk_line() with a flag
xdiff users: use designated initializers for out_line
pickaxe -G: don't special-case create/delete
pickaxe -G: terminate early on matching lines
xdiff-interface: allow early return from xdiff_emit_line_fn
xdiff-interface: prepare for allowing early return
pickaxe -S: slightly optimize contains()
pickaxe: rename variables in has_changes() for brevity
pickaxe -S: support content with NULs under --pickaxe-regex
pickaxe: assert that we must have a needle under -G or -S
pickaxe: refactor function selection in diffcore-pickaxe()
perf: add performance test for pickaxe
pickaxe/style: consolidate declarations and assignments
diff.h: move pickaxe fields together again
pickaxe: die when --find-object and --pickaxe-all are combined
pickaxe: die when -G and --pickaxe-regex are combined
pickaxe tests: add missing test for --no-pickaxe-regex being an error
pickaxe tests: test for -G, -S and --find-object incompatibility
pickaxe tests: add test for "log -S" not being a regex
pickaxe tests: add test for diffgrep_consume() internals
...
Preliminary clean-up of tests before the main reftable changes
hits the codebase.
* hn/prep-tests-for-reftable: (22 commits)
t1415: set REFFILES for test specific to storage format
t4202: mark bogus head hash test with REFFILES
t7003: check reflog existence only for REFFILES
t7900: stop checking for loose refs
t1404: mark tests that muck with .git directly as REFFILES.
t2017: mark --orphan/logAllRefUpdates=false test as REFFILES
t1414: mark corruption test with REFFILES
t1407: require REFFILES for for_each_reflog test
test-lib: provide test prereq REFFILES
t5304: use "reflog expire --all" to clear the reflog
t5304: restyle: trim empty lines, drop ':' before >
t7003: use rev-parse rather than FS inspection
t5000: inspect HEAD using git-rev-parse
t5000: reformat indentation to the latest fashion
t1301: fix typo in error message
t1413: use tar to save and restore entire .git directory
t1401-symbolic-ref: avoid direct filesystem access
t1401: use tar to snapshot and restore repo state
t5601: read HEAD using rev-parse
t9300: check ref existence using test-helper rather than a file system check
...
"git cat-file --batch-all-objects"" misbehaved when "--batch" is in
use and did not ask for certain object traits.
* zh/cat-file-batch-fix:
cat-file: merge two block into one
cat-file: handle trivial --batch format with --batch-all-objects
Add the missing __attribute__((format)) checking to
advise_if_enabled(). This revealed a trivial issue introduced in
b3b18d1621 (advice: revamp advise API, 2020-03-02). We treated the
argv[1] as a format string, but did not intend to do so. Let's use
"%s" and pass argv[1] as an argument instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard `die()` function that is used in C code prefixes all the
messages passed to it with 'fatal: '. This does not happen with the
`die` used in 'git-submodule.sh'.
Let's prefix each of the shell die messages with 'fatal: ' so that when
they are converted to C code, the error messages stay the same as before
the conversion.
Note that the shell version of `die` exits with error code 1, while the
C version exits with error code 128. In practice, this does not change
any behaviour, as no functionality in 'submodule add' and 'submodule
update' relies on the value of the exit code.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general, we encourage users to use plumbing commands, like git
rev-list, over porcelain commands, like git log, when scripting.
However, git rev-list has one glaring problem that prevents it from
being used in certain cases: when --pretty is used with a custom format,
it always prints out a line containing "commit" and the object ID. This
makes it unsuitable for many scripting needs, and forces users to use
git log instead.
While we can't change this behavior for backwards compatibility, we can
add an option to suppress this behavior, so let's do so, and call it
"--no-commit-header". Additionally, add the corresponding positive
option to switch it back on.
Note that this option doesn't affect the built-in formats, only custom
formats. This is exactly the same behavior as users already have from
git log and is what most users will be used to.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when the `--allow-empty-message` option is given, "git commit"
offers an interactive editor session with prefilled message that says
the commit will be aborted if the buffer is emptied, which is wrong.
Remove the "an empty message aborts" part from the message when the
option is given to fix it.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Helped-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Hu Jialun <hujialun@comp.nus.edu.sg>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a segfault in the --stdin-packs option added in
339bce27f4 (builtin/pack-objects.c: add '--stdin-packs' option,
2021-02-22).
The read_packs_list_from_stdin() function didn't check that the lines
it was reading were valid packs, and thus when doing the QSORT() with
pack_mtime_cmp() we'd have a NULL "util" field. The "util" field is
used to associate the names of included/excluded packs with the
packed_git structs they correspond to.
The logic error was in assuming that we could iterate all packs and
annotate the excluded and included packs we got, as opposed to
checking the lines we got on stdin. There was a check for excluded
packs, but included packs were simply assumed to be valid.
As noted in the test we'll not report the first bad line, but whatever
line sorted first according to the string-list.c API. In this case I
think that's fine. There was further discussion of alternate
approaches in [1].
Even though we're being lazy let's assert the line we do expect to get
in the test, since whoever changes this code in the future might miss
this case, and would want to update the test and comments.
1. http://lore.kernel.org/git/YND3h2l10PlnSNGJ@nand.local
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Output from some of our tests were affected by the width of the
terminal that they were run in, which has been corrected by
exporting a fixed value in the COLUMNS environment.
* ab/fix-columns-to-80-during-tests:
test-lib.sh: set COLUMNS=80 for --verbose repeatability
Some test scripts assumed that readlink(1) was universally
installed and available, which is not the case.
* jk/test-without-readlink-1:
t: use portable wrapper for readlink(1)
The side-band demultiplexer that is used to display progress output
from the remote end did not clear the line properly when the end of
line hits at a packet boundary, which has been corrected. Also
comes with test clean-ups.
* jx/sideband-cleanup:
test: refactor to use "get_abbrev_oid" to get abbrev oid
test: refactor to use "test_commit" to create commits
test: compare raw output, not mangle tabs and spaces
sideband: don't lose clear-to-eol at packet boundary
We broke "GIT_SKIP_TESTS=t?000" to skip certain tests in recent
update, which got fixed.
* jk/test-avoid-globmatch-with-skip-patterns:
test-lib: avoid accidental globbing in match_pattern_list()
Work around inefficient glob substitution in older versions of bash
by rewriting parts of a test.
* jx/t6020-with-older-bash:
t6020: fix incompatible parameter expansion
"git-svn" tests assumed that "locale -a", which is used to pick an
available UTF-8 locale, is available everywhere. A knob has been
introduced to allow testers to specify a suitable locale to use.
* dd/svn-test-wo-locale-a:
t: use user-specified utf-8 locale for testing svn
The recent --negotiate-only option would segfault in the call to
oid_array_for_each() in negotiate_using_fetch() unless one or more
--negotiation-tip=* options were provided.
All of the other tests for the feature combine both, but nothing was
checking this assumption, let's do that and add a test for it. Fixes a
bug in 9c1e657a8f (fetch: teach independent negotiation (no
packfile), 2021-05-04).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This saves 8K per `struct object_directory', meaning it saves
around 800MB in my case involving 100K alternates (half or more
of those alternates are unlikely to hold loose objects).
This is implemented in two parts: a generic, allocation-free
`cbtree' and the `oidtree' wrapper on top of it. The latter
provides allocation using alloc_state as a memory pool to
improve locality and reduce free(3) overhead.
Unlike oid-array, the crit-bit tree does not require sorting.
Performance is bound by the key length, for oidtree that is
fixed at sizeof(struct object_id). There's no need to have
256 oidtrees to mitigate the O(n log n) overhead like we did
with oid-array.
Being a prefix trie, it is natively suited for expanding short
object IDs via prefix-limited iteration in
`find_short_object_filename'.
On my busy workstation, p4205 performance seems to be roughly
unchanged (+/-8%). Startup with 100K total alternates with no
loose objects seems around 10-20% faster on a hot cache.
(800MB in memory savings means more memory for the kernel FS
cache).
The generic cbtree implementation does impose some extra
overhead for oidtree in that it uses memcmp(3) on
"struct object_id" so it wastes cycles comparing 12 extra bytes
on SHA-1 repositories. I've not yet explored reducing this
overhead, but I expect there are many places in our code base
where we'd want to investigate this.
More information on crit-bit trees: https://cr.yp.to/critbit.html
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to ensure failure on adding a submodule to a directory with
tracked contents in the index.
As we are going to refactor and port to C some parts of `git submodule
add`, let's add a test to help ensure no regression is introduced.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Based-on-patch-by: Shourya Shukla <periperidip@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t6402, we're checking number of files in the index and the working
tree by piping the output of Git's command to "wc -l", thus losing the
exit status code of git.
Let's use the new helper test_stdout_line_count in order to preserve
Git's exit status code.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t6400, we're checking number of files in the index and the working
tree by piping the output of "git ls-files" to "wc -l", thus losing the
exit status code of git.
Let's use the newly introduced test_stdout_line_count in order to check
the exit status code of Git's command.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some tests, we're checking the number of lines in output of some
commands, including but not limited to Git's command.
We're doing the check by running those commands in the left side of
a pipe, thus losing the exit status code of those commands. Meanwhile,
we really want to check the exit status code of Git's command.
Let's write the output of those commands to a temporary file, and use
test_line_count separately in order to check exit status code of
those commands properly.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the TEST_OUTPUT_DIRECTORY is defined, then all test data will be
written in that directory instead of the default directory located in
"t/". While this works as expected for our normal tests, performance
tests fail to locate and aggregate performance data because they don't
know to handle TEST_OUTPUT_DIRECTORY correctly and always look at the
default location.
Fix the issue by adding a `--results-dir` parameter to "aggregate.perl"
which identifies the directory where results are and by making the "run"
script awake of the TEST_OUTPUT_DIRECTORY variable.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a custom match_pattern_list() function which we use for matching
test names (like "t1234") against glob-like patterns (like "t1???") for
$GIT_SKIP_TESTS, --verbose-only, etc.
Those patterns may have multiple whitespace-separated elements (e.g.,
"t0* t1234 t5?78"). The callers of match_pattern_list thus pass the
strings unquoted, so that the shell does the usual field-splitting into
separate arguments.
But this also means the shell will do the usual globbing for each
argument, which can result in us seeing an expansion based on what's in
the filesystem, rather than the real pattern. For example, if I have the
path "t5000" in the filesystem, and you feed the pattern "t?000", that
_should_ match the string "t0000", but it won't after the shell has
expanded it to "t5000".
This has been a bug ever since that function was introduced. But it
didn't usually trigger since we typically use the function inside the
trash directory, which has a very limited set of files that are unlikely
to match. It became a lot easier to trigger after edc23840b0 (test-lib:
bring $remove_trash out of retirement, 2021-05-10), because now we match
$GIT_SKIP_TESTS before even entering the trash directory. So the t5000
example above can be seen with:
GIT_SKIP_TESTS=t?000 ./t0000-basic.sh
which should skip all tests but doesn't.
We can fix this by using "set -f" to ask the shell not to glob (which is
in POSIX, so should hopefully be portable enough). We only want to do
this in a subshell (to avoid polluting the rest of the script), which
means we need to get the whole string intact into the match_pattern_list
function by quoting it. Arguably this is a good idea anyway, since it
makes it much more obvious that we intend to split, and it's not simply
sloppy scripting.
Diagnosed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Directory rename detection can cause transitive renames, e.g. if the two
different sides of history each do one half of:
A/file -> B/file
B/ -> C/
then directory rename detection transitively renames to give us
A/file -> C/file
However, when C/ == A/, note that this gives us
A/file -> A/file.
merge-recursive assumed that any rename D -> E would have D != E. While
that is almost always true, the above is a special case where it is not.
So we cannot do things like delete the rename source, we cannot assume
that a file existing at path E implies a rename/add conflict and we have
to be careful about what stages end up in the output.
This change feels a bit hackish. It took me surprisingly many hours to
find, and given merge-recursive's design causing it to attempt to
enumerate all combinations of edge and corner cases with special code
for each combination, I'm worried there are other similar fixes needed
elsewhere if we can just come up with the right special testcase.
Perhaps an audit would rule it out, but I have not the energy.
merge-recursive deserves to die, and since it is on its way out anyway,
fixing this particular bug narrowly will have to be good enough.
Reported-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Path conflicts (typically rename path conflicts, e.g.
rename/rename(1to2) or rename/add/delete), and directory/file conflicts
should obviously result in files not being marked as clean in the merge.
We had a codepath where we missed consulting the path_conflict and
df_conflict flags, based on match_mask. Granted, it requires an unusual
setup to trigger this codepath (directory rename causing rename-to-self
is the only case I can think of), but we still need to handle it. To
make it clear that we have audited the other codepaths that do not
explicitly mention these flags, add some assertions that the flags are
not set.
Reported-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Directory rename detection can cause transitive renames, e.g. if the two
different sides of history each do one half of:
A/file -> B/file
B/ -> C/
then directory rename detection transitively renames to give us C/file.
Since the default for merge.directoryRenames is conflict, this results
in an error message saying it is unclear whether the file should be
placed at B/file or C/file.
What if C/ is A/, though? In such a case, the transitive rename would
give us A/file, the original name we started with. Logically, having
an error message with B/file vs. A/file should be fine, as should
leaving the file where it started. But the logic in both
merge-recursive and merge-ort did not handle a case of a filename being
renamed to itself correctly; merge-recursive had two bugs, and merge-ort
had one. Add some testcases covering such a scenario.
Based-on-testcase-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git grep allows combining two patterns with --and. It checks and
reports if the second pattern is missing when compiling the expression.
A missing first pattern, however, is only reported later at match time.
Thus no error is returned if no matching is done, e.g. because no file
matches the also given pathspec.
When that happens we get an expression tree with an GREP_NODE_AND node
and a NULL pointer to the missing left child. free_pattern_expr()
tries to dereference it during the cleanup at the end, which results
in a segmentation fault.
Fix this by verifying the presence of the left operand at expression
compilation time.
Reported-by: Matthew Hughes <matthewhughes934@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests will fail under --verbose because while we've unset COLUMNS
since b1d645b58a (tests: unset COLUMNS inherited from environment,
2012-03-27), we also look for the columns with an ioctl(..,
TIOCGWINSZ, ...) on some platforms. By setting COLUMNS again we
preempt the TIOCGWINSZ lookup in pager.c's term_columns(), it'll take
COLUMNS over TIOCGWINSZ,
This fixes t0500-progress-display.sh., which broke because of a
combination of the this issue and the progress output reacting to the
column width since 545dc345eb (progress: break too long progress bar
lines, 2019-04-12). The t5324-split-commit-graph.sh fails in a similar
manner due to progress output, see [1] for details.
The issue is not specific to progress.c, the diff code also checks
COLUMNS and some of its tests can be made to fail in a similar
manner[2], anything that invokes a pager is potentially affected.
See ea77e675e5 (Make "git help" react to window size correctly,
2005-12-18) and ad6c3739a3 (pager: find out the terminal width before
spawning the pager, 2012-02-12) for how the TIOCGWINSZ code ended up
in pager.c
1. http://lore.kernel.org/git/20210624051253.GG6312@szeder.dev
2. https://lore.kernel.org/git/20210627074419.GH6312@szeder.dev/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git multi-pack-index verify' inspects the data in an existing MIDX for
correctness by checking that the recorded object offsets are correct,
and so on.
But it does not check that the file's trailing checksum matches the data
that it records. So, if an on-disk corruption happened to occur in the
final few bytes (and all other data was recorded correctly), we would:
- get a clean result from 'git multi-pack-index verify', but
- be unable to reuse the existing MIDX when writing a new one (since
we now check for checksum mismatches before reusing a MIDX)
Teach the 'verify' sub-command to recognize corruption in the checksum
by calling midx_checksum_valid().
Suggested-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a new multi-pack index, Git tries to reuse as much of the
data from an existing MIDX as possible, like object offsets. This is
done to avoid re-opening a bunch of *.idx files unnecessarily, but can
lead to problems if the data we are reusing is corrupt.
That's because we'll blindly reuse data from an existing MIDX without
checking its trailing checksum for validity. So if there is memory
corruption while writing a MIDX, or disk corruption in the intervening
period between writing and reuse, we'll blindly propagate those bad
values forward.
Suppose we experience a memory corruption while writing a MIDX such that
we write an incorrect object offset (or alternatively, the disk corrupts
the data after being written, but before being reused). Then when we go
to write a new MIDX, we'll reuse the bad object offset without checking
its validity. This means that the MIDX we just wrote is broken, but its
trailing checksum is in-tact, since we never bothered to look at the
values before writing.
In the above, a "git multi-pack-index verify" would have caught the
problem before writing, but writing a new MIDX wouldn't have noticed
anything wrong, blindly carrying forward the corrupt offset.
Individual pack indexes check their validity by verifying the crc32
attached to each entry when carrying data forward during a repack.
We could solve this problem for MIDXs in the same way, but individual
crc32's don't make much sense, since their entries are so small.
Likewise, checking the whole file on every read may be prohibitively
expensive if a repository has a lot of objects, packs, or both.
But we can check the trailing checksum when reusing an existing MIDX
when writing a new one. And a corrupt MIDX need not stop us from writing
a new one, since we can just avoid reusing the existing one at all and
pretend as if we are writing a new MIDX from scratch.
Suggested-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cover blindspots in the testing of stdin handling, including the
"!len" condition added in b5d97e6b0a (pack-objects: run rev-list
equivalent internally., 2006-09-04). The codepath taken with --revs
and read_object_list_from_stdin() acts differently in some of these
common cases, let's test for those.
The "--stdin --revs" test being added here stresses the combination of
--stdin-packs and the revision.c --stdin argument, some of this was
covered in a test added in 339bce27f4 (builtin/pack-objects.c: add
'--stdin-packs' option, 2021-02-22), but let's make sure that
GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=true keeps erroring out about
--stdin, and it isn't picked up by the revision.c API's handling of
that option.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both in t4258 and in t9001, the code of the tests following shows the
proper name for the configuration variables. So use the correct names
in the test messages as well.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one step towards supporting partial clone submodules.
Even after this patch, we will still lack partial clone submodules
support, primarily because a lot of Git code that accesses submodule
objects does so by adding their object stores as alternates, meaning
that any lazy fetches that would occur in the submodule would be done
based on the config of the superproject, not of the submodule. This also
prevents testing of the functionality in this patch by user-facing
commands. So for now, test this mechanism using a test helper.
Besides that, there is some code that uses the wrapper functions
like has_promisor_remote(). Those will need to be checked to see if they
could support the non-wrapper functions instead (and thus support any
repository, not just the_repository).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing tests for --remotes, --list and --merge-base. These are
not exhaustive, but better than the nothing we have now.
There were some tests for this command added in f76412ed6d ([PATCH]
Add 'git show-branch'., 2005-08-21) has never been properly tested,
namely for the --all option in t6432-merge-recursive-space-options.sh,
and some of --merge-base and --independent in t6010-merge-base.sh.
This fixes a few more blind spots, but there's still a lot of behavior
that's not tested for.
These new tests show the odd (and possibly unintentional) behavior of
--merge-base with one argument, and how its output is the same as "git
merge-base" with N bases in this particular case. See the test added
in f621a8454d (git-merge-base/git-show-branch --merge-base:
Documentation and test, 2009-08-05) for a case where the two aren't
the same.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the colored output introduced in ab07ba2a24 (show-branch: color
the commit status signs, 2009-04-22) to not color and reset each
individual space character we use for padding. The intent is to color
just the "!", "+" etc. characters.
This makes the output easier to test, so let's do that now. The test
would be much more verbose without a color/reset for each space
character. Since the coloring cycles through colors we previously had
a "rainbow of space characters".
In theory this breaks things for anyone who's relying on the exact
colored output of show-branch, in practice I'd think anyone parsing it
isn't actively turning on the colored output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass the bad tags we've created in the mktag tests through
fast-export, it will die on the bad object or ref, let's make sure
that happens.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a "for-each-ref" for all the mktag tests. This test would have
caught the segfault which was fixed in c685450880 (ref-filter: fix
NULL check for parse object failure, 2021-04-01). Let's make sure we
test that code more exhaustively.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the mktag tests to pass the created bad tag through update-ref
and fsck.
The reason for passing it through update-ref is to guard against it
having a segfault as for-each-ref did before c685450880 (ref-filter:
fix NULL check for parse object failure, 2021-04-01).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the mktag tests to pass the tag we've created through both
hash-object --literally and fsck.
This checks that fsck itself will not complain about certain invalid
content if a reachable tip isn't involved. Due to how fsck works and
walks the graph the failure will be different if the object is
reachable, so we might succeed before we've created the ref.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7fbbcb21b1 ("diff: batch fetching of missing blobs", 2019-04-05)
introduced batching of fetching missing blobs, so that the diff
machinery would have one fetch subprocess grab N blobs instead of N
processes each grabbing 1.
However, the diff machinery is not the only thing in a merge that needs
to work on blobs. The 3-way content merges need them as well. Rather
than download all the blobs 1 at a time, prefetch all the blobs needed
for regular content merges.
This does not cover all possible paths in merge-ort that might need to
download blobs. Others include:
- The blob_unchanged() calls to avoid modify/delete conflicts (when
blob renormalization results in an "unchanged" file)
- Preliminary content merges needed for rename/add and
rename/rename(2to1) style conflicts. (Both of these types of
conflicts can result in nested conflict markers from the need to do
two levels of content merging; the first happens before our new
prefetch_for_content_merges() function.)
The first of these wouldn't be an extreme amount of work to support, and
even the second could be theoretically supported in batching, but all of
these cases seem unusual to me, and this is a minor performance
optimization anyway; in the worst case we only get some of the fetches
batched and have a few additional one-off fetches. So for now, just
handle the regular 3-way content merges in our prefetching.
For the testcase from the previous commit, the number of downloaded
objects remains at 63, but this drops the number of fetches needed from
32 down to 20, a sizeable reduction.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-ort was designed to minimize the amount of data needed and used,
and several changes were made to diffcore-rename to take advantage of
extra metadata to enable this data minimization (particularly the
relevant_sources variable for skipping "irrelevant" renames). This
effort obviously succeeded in drastically reducing computation times,
but should also theoretically allow partial clones to download much less
information. Previously, though, the "prefetch" command used in
diffcore-rename had never been modified and downloaded many blobs that
were unnecessary for merge-ort. This commit corrects that.
When doing basename comparisons, we want to fetch only the objects that
will be used for basename comparisons. If after basename fetching this
leaves us with no more relevant sources (or no more destinations), then
we won't need to do the full inexact rename detection and can skip
downloading additional source and destination files. Even if we have to
do that later full inexact rename detection, irrelevant sources are
culled after basename matching and before the full inexact rename
detection, so we can still avoid downloading the blobs for irrelevant
sources. Rename prefetch() to inexact_prefetch(), and introduce a
new basename_prefetch() to take advantage of this.
If we modify the testcase from commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2021-01-23)
to pass
--sparse --filter=blob:none
to the clone command, and use the new trace2 "fetch_count" output from
a few commits ago to track both the number of fetch subcommands invoked
and the number of objects fetched across all those fetches, then for
the mega-renames testcase we observe the following:
BEFORE this commit, rebasing 35 patches:
strategy # of fetches total # of objects fetched
--------- ------------ --------------------------
recursive 62 11423
ort 30 11391
AFTER this commit, rebasing the same 35 patches:
ort 32 63
This means that the new code only needs to download less than 2 blobs
per patch being rebased. That is especially interesting given that the
repository at the start only had approximately half a dozen TOTAL blobs
downloaded to start with (because the default sparse-checkout of just
the toplevel directory was in use).
So, for this particular linux kernel testcase that involved ~26,000
renames on the upstream side (drivers/ -> pilots/) across which 35
patches were being rebased, this change reduces the number of blobs that
need to be downloaded by a factor of ~180.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not all systems have a readlink program available for use by the shell.
This causes t3210 to fail on at least AIX. Let's provide a perl
one-liner to do the same thing, and use it there.
I also updated calls in t9802. Nobody reported failure there, but it's
the same issue. Presumably nobody actually tests with p4 on AIX in the
first place (if it is even available there).
I left the use of readlink in the "--valgrind" setup in test-lib.sh, as
valgrind isn't available on exotic platforms anyway (and I didn't want
to increase dependencies between test-lib.sh and test-lib-functions.sh).
There's one other curious case. Commit d2addc3b96 (t7800: readlink may
not be available, 2016-05-31) fixed a similar case. We can't use our
wrapper function there, though, as it's inside a sub-script triggered by
Git. It uses a slightly different technique ("ls" piped to "sed"). I
chose not to use that here as it gives confusing "ls -l" output if the
file is unexpectedly not a symlink (which is OK for its limited use, but
potentially confusing for general use within the test suite). The perl
version emits the empty string.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new function "get_abbrev_oid" to get abbrev object ID. This
function has a default value which helps to prepare a nonempty replace
pattern for sed command. An empty replace pattern may cause sed fail
to allocate memory.
Refactor function "make_user_friendly_and_stable_output" to use
"get_abbrev_oid" to get abbrev object ID.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor function "create_commits_in" to use "test_commit" to create
commit.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before comparing with the expect file, we used to call function
"make_user_friendly_and_stable_output" to filter out trailing spaces in
output. Ævar recommends using pattern "s/Z$//" to prepare expect file,
and then compare it with raw output.
Since we have fixed the issue of occasionally missing the clear-to-eol
suffix when displaying sideband #2 messages, it is safe and stable to
test against raw output.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ævar reported that the function `make_user_friendly_and_stable_output()`
failed on a i386 box (gcc45) in the gcc farm boxes with error:
sed: couldn't re-allocate memory
It turns out that older versions of bash (4.3) or dash (0.5.7) cannot
evaluate expression like `${A%${A#???????}}` used to get the leading 7
characters of variable A.
Replace the incompatible parameter expansion so that t6020 works on
older version of bash or dash.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These typos were found while searching the codebase for gendered
pronouns. In the case of t9300-fast-import.sh, remove a confusing
comment that is unnecessary to the understanding of the test.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing test for the behavior of the pre-auto-gc hook added in
0b85d92661 (Documentation/hooks: add pre-auto-gc hook, 2008-04-02).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start by creating an "actual" file in a core.hooksPath test that has
the hook echoing to the "actual" file.
We later test_cmp that file to see what hooks were run. If we fail to
run our hook(s) we'll have an empty list of hooks for the test_cmp
instead of a nonexisting file. For the logic of this test that makes more sense.
See 867ad08a26 (hooks: allow customizing where the hook directory is,
2016-05-04) for the commit that added these tests.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modernize test code added in ce567d1867 (Add test to show that
show-branch misses out the 8th column, 2008-07-23) and
11ee57bc4c (sort_in_topological_order(): avoid setting a commit flag,
2008-07-23) to use test helpers.
I'm renaming "out" to "actual" for consistency with other tests, and
introducing a "branches.sorted" file in the setup, to make it clear
that it's important that the list be sorted in this particular way.
The "show-branch" output is indented with spaces, which would cause
complaints under "git show --check" with an indented here-doc
block. Let's prefix the lines with "> " to work around that, and to
make it clear that the leading whitespace is important.
We can also get rid of the hardcoding of "main" added here in
334afbc76f (tests: mark tests relying on the current default for
`init.defaultBranch`, 2020-11-18). For this test we're setting up an
"initial" commit anyway, and now that we've moved over to test_commit
we can reference that instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the only *show-branch* test file to indicate that more tests
belong it in than just the one-off octopus test it now contains.
The test was initially added in ce567d1867 (Add test to show that
show-branch misses out the 8th column, 2008-07-23) and
11ee57bc4c (sort_in_topological_order(): avoid setting a commit flag,
2008-07-23). Those two add almost the same content, one with a
test_expect_success and the other a test_expect_failure (a bug being
tested for was fixed on one of the branches).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the mktag --no-strict test to actually test success under
--no-strict, that test was added in 06ce79152b (mktag: add a
--[no-]strict option, 2021-01-06).
It doesn't make sense to check that we have the same failure except
when we want --no-strict, by doing that we're assuming that the
behavior will be different under --no-strict, bun nothing was testing
for that.
We should instead assert that --strict is the same as --no-strict,
except in the cases where we've declared that it's not.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change check_verify_failure() helper to parse out options from
$@. This makes it easier to add new options in the future. See
06ce79152b (mktag: add a --[no-]strict option, 2021-01-06) for the
initial implementation.
Let's also replace "" quotes with '' for the test body, the varables
we need are eval'd into the body, so there's no need for the quoting
confusion.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test clean-up.
* ab/test-lib-updates:
test-lib: split up and deprecate test_create_repo()
test-lib: do not show advice about init.defaultBranch under --verbose
test-lib: reformat argument list in test_create_repo()
submodule tests: use symbolic-ref --short to discover branch name
test-lib functions: add --printf option to test_commit
describe tests: convert setup to use test_commit
test-lib functions: add an --annotated option to "test_commit"
test-lib-functions: document test_commit --no-tag
test-lib-functions: reword "test_commit --append" docs
test-lib tests: remove dead GIT_TEST_FRAMEWORK_SELFTEST variable
test-lib: bring $remove_trash out of retirement
The "-m" option in "git log -m" that does not specify which format,
if any, of diff is desired did not have any visible effect; it now
implies some form of diff (by default "--patch") is produced.
* so/log-m-implies-p:
diff-merges: let "-m" imply "-p"
diff-merges: rename "combined_imply_patch" to "merges_imply_patch"
stash list: stop passing "-m" to "git log"
git-svn: stop passing "-m" to "git rev-list"
diff-merges: move specific diff-index "-m" handling to diff-index
t4013: test "git diff-index -m"
t4013: test "git diff-tree -m"
t4013: test "git log -m --stat"
t4013: test "git log -m --raw"
t4013: test that "-m" alone has no effect in "git log"
Optimize out repeated rename detection in a sequence of mergy
operations.
* en/ort-perf-batch-11:
merge-ort, diffcore-rename: employ cached renames when possible
merge-ort: handle interactions of caching and rename/rename(1to1) cases
merge-ort: add helper functions for using cached renames
merge-ort: preserve cached renames for the appropriate side
merge-ort: avoid accidental API mis-use
merge-ort: add code to check for whether cached renames can be reused
merge-ort: populate caches of rename detection results
merge-ort: add data structures for in-memory caching of rename detection
t6429: testcases for remembering renames
fast-rebase: write conflict state to working tree, index, and HEAD
fast-rebase: change assert() to BUG()
Documentation/technical: describe remembering renames optimization
t6423: rename file within directory that other side renamed
Recent "git clone" left a temporary directory behind when the
transport layer returned an failure.
* jk/clone-clean-upon-transport-error:
clone: clean up directory after transport_fetch_refs() failure
"git send-email" learned the "--sendmail-cmd" command line option
and the "sendemail.sendmailCmd" configuration variable, which is a
more sensible approach than the current way of repurposing the
"smtp-server" that is meant to name the server to instead name the
command to talk to the server.
* ga/send-email-sendmail-cmd:
git-send-email: add option to specify sendmail command
Fix typos in documentation, code comments, and RelNotes which repeat
various words. In trivial cases, just delete the duplicated word and
rewrap text, if needed. Reword the affected sentence in
Documentation/RelNotes/1.8.4.txt for it to make sense.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since cd1d61c44f (make union merge an xdl merge favor, 2010-03-01), we
pass NULL to ll_xdl_merge() for the "name" labels of the ancestor, ours
and theirs buffers. We usually use these for annotating conflict markers
left in a file. For a union merge, these shouldn't matter; the point of
it is that we'd never leave conflict markers in the first place.
But there is one code path where we may dereference them: if the file
contents appear to be binary, ll_binary_merge() will give up and pass
them to warning() to generate a message for the user (that was true even
when cd1d61c44f was written, though the warning was in ll_xdl_merge()
back then).
That can result in a segfault, though on many systems (including glibc),
the printf routines will helpfully just say "(null)" instead. We can
extend our binary-union test in t6406 to check stderr, which catches the
problem on all systems.
This also fixes a warning from "gcc -O3". Unlike lower optimization
levels, it inlines enough to see that the NULL can make it to warning()
and complains:
In function ‘ll_binary_merge’,
inlined from ‘ll_xdl_merge’ at ll-merge.c:115:10,
inlined from ‘ll_union_merge’ at ll-merge.c:151:9:
ll-merge.c:74:4: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
74 | warning("Cannot merge binary files: %s (%s vs. %s)",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
75 | path, name1, name2);
| ~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
