The "git ls-remote" uses its exit status to indicate if it successfully
talked with the remote repository. A new option "--exit-code" makes the
command exit with status "2" when there is no refs to be listed, even when
the command successfully talked with the remote repository.
This way, the caller can tell if we failed to contact the remote, or the
remote did not have what we wanted to see. Of course, you can inspect the
output from the command, which has been and will continue to be a valid
way to check the same thing.
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add log.abbrevCommit config variable as a convenience for users who
often use --abbrev-commit with git log and friends. Allow the option
to be overridden with --no-abbrev-commit. Per 635530a2fc and 4f62c2bc57,
the config variable is ignored when log is given "--pretty=raw".
(Also, a drive-by spelling correction in git log's short help.)
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to set a multivar with "git config var value", "git config"
issues
warning: remote.repoor.push has multiple values
leaving the user under the impression that the operation succeeded,
unless one checks the return value.
Instead, make it
warning: remote.repoor.push has multiple values
error: cannot overwrite multiple values with a single value
Use a regexp, --add or --set-all to change remote.repoor.push.
to be clear and helpful.
Note: The "warning" is raised through other code paths also so that it
needs to remain a warning for these (which do not raise the error). Only
the caller can determine how to go on from that.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ci/commit--interactive-atomic:
Test atomic git-commit --interactive
Add commit to list of config.singlekey commands
Add support for -p/--patch to git-commit
Allow git commit --interactive with paths
t7501.8: feed a meaningful command
Use a temporary index for git commit --interactive
* mg/merge-ff-config:
tests: check git does not barf on merge.ff values for future versions of git
merge: introduce merge.ff configuration variable
Conflicts:
t/t7600-merge.sh
* jc/maint-add-p-overlapping-hunks:
t3701: add-p-fix makes the last test to pass
"add -p": work-around an old laziness that does not coalesce hunks
add--interactive.perl: factor out repeated --recount option
t3701: Editing a split hunk in an "add -p" session
add -p: 'q' should really quit
Although it is probably an uncommon operation, there is no
reason to disallow it, as it works just fine. It is the
reverse of a cherry-pick of a root commit, which is already
allowed.
We do have to tweak one check on whether we have a merge
commit, which assumed we had at least one parent.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge-recursive strategy already handles root commits;
it cherry-picks the difference between the empty tree and
the root commit's tree.
However, for external strategies, we dereference NULL and
segfault while building the argument list. Instead, let's
handle this by passing the empty tree sha1 to the merge
script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most callers want to silently get a replacement object, and they do not
care what the real name of the replacement object is. Worse yet, no sane
interface to return the underlying object without replacement is provided.
Remove the function and make only the few callers that want the name of
the replacement object find it themselves.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config machinery already makes section and variable names
lowercase when parsing them, so using strcasecmp for comparison just
feels wasteful. No noticeable change intended.
Noticed-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-add-p-overlapping-hunks:
t3701: add-p-fix makes the last test to pass
"add -p": work-around an old laziness that does not coalesce hunks
add--interactive.perl: factor out repeated --recount option
t3701: Editing a split hunk in an "add -p" session
add -p: 'q' should really quit
Templates should be just that: A form that the user fills out, and forms
have blanks. If people are attached to not having extra whitespace in the
editor, they can simply clean up their templates.
Added test with editor adding even more whitespace.
Signed-off-by: Boris Faure <billiob@gmail.com>
Based-on-patch-by:Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is no remaining string in argv, get_pathspec(prefix, argv)
will return a two-element array that has prefix as the first element,
so there is no need to re-roll that logic in the code that uses
get_pathspec().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Disallow '-' as tag name, as well as tag names starting with '-', as it
would be cumbersome to "git checkout tags/-" because "git checkout -" is
to switch to the previous branch.
Add strbuf_check_tag_ref() as helper to check a refname for a tag.
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous one made "git grep -P" fail when grep.extendedRegexp is
enabled. That is a no-starter. The option on the command line should
just make the command ignore the configured default. The handling of "-F"
in the existing code has the same problem.
Instead of saying -G/-F/-E/-P incompatible with each other, just allow
the last one win. That way, you can have "[alias] gr = grep -P" and
use Pcre for everyday work e.g. "git gr ':i?foo'", and append -G to the
aliased command line to override it e.g. "git gr -G '[Ff][Oo][Oo]'".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --interactive flag is already shared by git add and git commit,
share the -p and --patch flags too.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git commit --interactive feel more like git add --interactive by
allowing the user to restrict the list of files they have to deal with.
A test in t7501 used to ensure that this is not allowed; no need for that
anymore.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes git-grep die() when -P is used on command line together
with -E/--extended-regexp or -F/--fixed-strings.
This also makes it bail out when grep.extendedRegexp is enabled.
But `git grep -G -P pattern` and `git grep -E -G -P pattern` still work
because -G and -E set opts.regflags during parse_options() and there is
no way to detect `-G` or `-E -G`.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches git-grep the --perl-regexp/-P options (naming
borrowed from GNU grep) in order to allow specifying PCRE regexes on the
command line.
PCRE has a number of features which make them more handy to use than
POSIX regexes, like consistent escaping rules, extended character
classes, ungreedy matching etc.
git isn't build with PCRE support automatically. USE_LIBPCRE environment
variable must be enabled (like `make USE_LIBPCRE=YesPlease`).
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just like --porcelain, except that we always output
the commit information for each line, not just the first
time it is referenced. This can make quick and dirty scripts
much easier to write; see the example added to the blame
documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation for adding more porcelain output
options. The three changes are:
1. emit_porcelain now receives the format option flags
2. emit_one_suspect_detail takes an optional "repeat"
parameter to suppress the "show only once" behavior
3. The code for emitting porcelain suspect is factored
into its own function for repeatability.
There should be no functional changes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "format_check" parameter tucked after the existing parameters is too
ugly an afterthought to live in any reasonable API.
Combine it with the other boolean parameter "write_object" into a single
"flags" parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the two features from builtin/rerere.c to a more library-ish
portion of the codebase. No behaviour change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the behaviour of git commit --interactive so that when you abort
the commit (by leaving the commit message empty) the index remains
unchanged.
Hitherto an aborted commit --interactive has added the selected hunks to
the index regardless of whether the commit succeeded or not.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable gives the default setting for --ff, --no-ff or --ff-only
options of "git merge" command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/struct-pathspec:
pathspec: rename per-item field has_wildcard to use_wildcard
Improve tree_entry_interesting() handling code
Convert read_tree{,_recursive} to support struct pathspec
Reimplement read_tree_recursive() using tree_entry_interesting()
* mg/reflog-with-options:
reflog: fix overriding of command line options
t/t1411: test reflog with formats
builtin/log.c: separate default and setup of cmd_log_init()
* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
Since 0beee4c (git-add--interactive: remove hunk coalescing, 2008-07-02),
"git add--interactive" behaves lazily and passes overlapping hunks to the
underlying "git apply" without coalescing. This was partially corrected
by 7a26e65 (its partial revert, 2009-05-16), but overlapping hunks are
still passed when the patch is edited.
Teach "git apply" the --allow-overlap option that disables a safety
feature that avoids misapplication of patches by not applying patches
to overlapping hunks, and pass this option form "add -p" codepath.
Do not even advertise the option, as this is merely a workaround, and the
correct fix is to make "add -p" correctly coalesce adjacent patch hunks.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names and e-mails are sanitized by fmt_ident() when creating commits,
so that they do not contain "<" nor ">", and the "committer" and "author"
lines in the commit object will always be in the form:
("author" | "committer") name SP "<" email ">" SP timestamp SP zone
When parsing the email part out, the current code looks for SP starting
from the end of the email part, but the author could obfuscate the address
as "author at example dot com".
We should instead look for SP followed by "<", to match the logic of the
side that formats these lines.
Signed-off-by: Josh Stone <jistone@redhat.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/rename-degrade-cc-to-c:
diffcore-rename: fall back to -C when -C -C busts the rename limit
diffcore-rename: record filepair for rename src
diffcore-rename: refactor "too many candidates" logic
builtin/diff.c: remove duplicated call to diff_result_code()
* rj/sparse:
sparse: Fix some "symbol not declared" warnings
sparse: Fix errors due to missing target-specific variables
sparse: Fix an "symbol 'merge_file' not decared" warning
sparse: Fix an "symbol 'format_subject' not declared" warning
sparse: Fix some "Using plain integer as NULL pointer" warnings
sparse: Fix an "symbol 'cmd_index_pack' not declared" warning
Makefile: Use cgcc rather than sparse in the check target
* mg/reflog-with-options:
reflog: fix overriding of command line options
t/t1411: test reflog with formats
builtin/log.c: separate default and setup of cmd_log_init()
When --count is used with --cherry-mark, omit the patch equivalent
commits from the count for left and right commits and print the count of
equivalent commits separately.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -u" updates the index with the updated contents from the working
tree by internally running "diff-files" to grab the set of paths that are
different from the index. Then it updates the index entries for the paths
that are modified in the working tree, and deletes the index entries for
the paths that are deleted in the working tree.
It ignored the output from the diff-files that indicated that a path is
unmerged. For these paths, it instead relied on the fact that an unmerged
path is followed by the result of comparison between stage #2 (ours) and
the working tree, and used that to update or delete such a path when it is
used to record the resolution of a conflict.
As the result, when a path did not have stage #2 (e.g. "we deleted while
the other side added"), these unmerged stages were left behind, instead of
recording what the user resolved in the working tree.
Since we recently fixed "diff-files" to indicate if the corresponding path
exists on the working tree for an unmerged path, we do not have to rely on
the comparison with stage #2 anymore. We can instead tell the diff-files
not to compare with higher stages, and use the unmerged output to update
the index to reflect the state of the working tree.
The changes to the test vector in t2200 illustrates the nature of the bug
and the fix. The test expected stage #1 and #3 entries be left behind,
but it was codifying the buggy behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike plain merge-base, merge-base --octopus only requires at least one
commit argument; update the synopsis to reflect that.
Add a sentence to the discussion that when --octopus is used, we do expect
'2' (the common ansestor across all) as the result.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use parse-options in cmd_log_init instead of manually iterating
through them. This makes the code a bit cleaner but more importantly
allows us to catch the "--quiet" option which causes some of the
log-related commands to misbehave as it would otherwise get passed on
to the diff.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '-r' command-line option is a no-op provided only for backward
compatiblity since abd6970 (cherry-pick: make -r the default, 2006-10-05),
and somehow ended up surviving across reimplementation in C at 9509af6
(Make git-revert & git-cherry-pick a builtin, 2007-03-01) and another
rewrite of the command line parser at f810379 (Make builtin-revert.c use
parse_options, 2007-10-07). We should have stopped advertising the option
long time ago.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --quiet flag is not meant to be passed on to the diff, as the user
always wants the patches to be produced so catch it and pass it to
reopen_stdout which decides whether to print the filename or not.
Noticed by Paul Gortmaker
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the init-db messages that were added in v1.7.5-rc1~16^2 (init,
clone: support --separate-git-dir for .git file) by Nguyễn Thái Ngọc
Duy for translation.
This requires splitting up the tests that the patch added so that
certain parts of them can be skipped unless the C_LOCALE_OUTPUT
prerequisite is satisfied.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the "Warning: you are leaving %d commit(s) behind" message added
in v1.7.5-rc0~74^2 (commit: give final warning when reattaching HEAD
to leave commits behind) by Junio C Hamano for translation.
This message requires the use of ngettext() features, and is the first
message to use the Q_() wrapper around ngettext().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark messages added in v1.7.5-rc0~117^2~2 (checkout: introduce
--detach synonym for "git checkout foo^{commit}") by Junio C Hamano
for translation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the "repository '%s' does not exist" message added in
v1.7.4.2~21^2 (clone: die when trying to clone missing local path) by
Jeff King for translation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark CHERRY_PICK_HEAD related messages in builtin/merge.c that were
added in v1.7.5-rc0~88^2~2 (Introduce CHERRY_PICK_HEAD) by Jay Soffian
for translation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the merge messages that were added in v1.7.5-rc1~17^2 (merge:
merge with the default upstream branch without argument) by Junio C
Hamano for translation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the "Could not read from '%s'" message that was added to
builtin/merge.c in v1.7.4.2~25^2 (merge: honor prepare-commit-msg
hook) by Jay Soffian for translation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to fix the warning, we add a new "merge-file.h" header
containing the extern declaration of the merge_file() function,
and include the header in the source files that require the
declaration.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to fix the warning, we add an extern declaration for this
function to the "commit.h" header file, along with all other non-
static functions defined in pretty.c. Also, we remove the function
declaration from builtin/shortlog.c, since it is no longer needed.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like "git checkout -" is a short-hand for "git checkout @{-1}" to
conveniently switch back to the previous branch, "git merge -" is a
short-hand for "git merge @{-1}" to conveniently merge the previous branch.
It will allow me to say:
$ git checkout -b au/topic
$ git am -s ./+au-topic.mbox
$ git checkout pu
$ git merge -
which is an extremely typical and repetitive operation during my git day.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-remote-mirror-safer:
remote: deprecate --mirror
remote: separate the concept of push and fetch mirrors
remote: disallow some nonsensical option combinations
The pack-objects command should take notice of the object file and
refrain from attempting to delta large ones, to be consistent with
the fast-import command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If user sets config.abbrev option, use it as if --abbrev was given. This
is the default value and user can override different abbrev length by
specifying the --abbrev=N command line option.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the point of the last change is to allow use of strings as
literals no matter what characters are in them, "has_wildcard"
does not match what we use this field for anymore.
It is used to decide if the wildcard matching should be used, so
rename it to match the usage better.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also adds the new colors to show-branch that were added a while
back for graph output.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-fetch-on-demand:
fetch/pull: Describe --recurse-submodule restrictions in the BUGS section
submodule update: Don't fetch when the submodule commit is already present
fetch/pull: Don't recurse into a submodule when commits are already present
Submodules: Add 'on-demand' value for the 'fetchRecurseSubmodule' option
config: teach the fetch.recurseSubmodules option the 'on-demand' value
fetch/pull: Add the 'on-demand' value to the --recurse-submodules option
fetch/pull: recurse into submodules when necessary
Conflicts:
builtin/fetch.c
submodule.c
* load_file() returns a void pointer but is using 0 for the return
value
* builtin/receive-pack.c forgot to include builtin.h
* packet_trace_prefix can be marked static
* ll_merge takes a pointer for its last argument, not an int
* crc32 expects a pointer as the second argument but Z_NULL is defined
to be 0 (see 38f4d13 sparse fix: Using plain integer as NULL pointer,
2006-11-18 for more info)
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/merge-sans-branch:
merge: merge with the default upstream branch without argument
merge: match the help text with the documentation
Conflicts:
builtin/merge.c
Currently, "git reflog" overrides some command line options such as
"--format".
Fix this by using the new 2-phase version of cmd_log_init().
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_log_init() sets up some default rev options and then calls
setup_revisions(), so that a caller cannot set up own defaults: Either
they get overriden by cmd_log_init() (if set before) or they override
the command line (if set after). We even complain about this in a
comment to cmd_log_reflog().
Therefore, separate the two steps so that one can still call
cmd_log_init() or, alternatively, cmd_log_init_defaults() followed by
cmd_log_init_finish() (and set defaults in between).
No functional change so far.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration created by plain --mirror is dangerous and
useless, and we now have --mirror=fetch and --mirror=push to
replace it. Let's warn the user.
One alternative to this is to try to guess which type the
user wants. In a non-bare repository, a fetch mirror doesn't
make much sense, since it would overwrite local commits. But
in a bare repository, you might use either type, or even
both (e.g., if you are acting as an intermediate drop-point
across two disconnected networks).
So rather than try for complex heuristics, let's keep it
simple. The user knows what they're trying to do, so let
them tell us.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-remote currently has one option, "--mirror", which sets
up mirror configuration which can be used for either
fetching or pushing. It looks like this:
[remote "mirror"]
url = wherever
fetch = +refs/*:refs/*
mirror = true
However, a remote like this can be dangerous and confusing.
Specifically:
1. If you issue the wrong command, it can be devastating.
You are not likely to "push" when you meant to "fetch",
but "git remote update" will try to fetch it, even if
you intended the remote only for pushing. In either
case, the results can be quite destructive. An
unintended push will overwrite or delete remote refs,
and an unintended fetch can overwrite local branches.
2. The tracking setup code can produce confusing results.
The fetch refspec above means that "git checkout -b new
master" will consider refs/heads/master to come from
the remote "mirror", even if you only ever intend to
push to the mirror. It will set up the "new" branch to
track mirror's refs/heads/master.
3. The push code tries to opportunistically update
tracking branches. If you "git push mirror foo:bar",
it will see that we are updating mirror's
refs/heads/bar, which corresponds to our local
refs/heads/bar, and will update our local branch.
To solve this, we split the concept into "push mirrors" and
"fetch mirrors". Push mirrors set only remote.*.mirror,
solving (2) and (3), and making an accidental fetch write
only into FETCH_HEAD. Fetch mirrors set only the fetch
refspec, meaning an accidental push will not force-overwrite
or delete refs on the remote end.
The new syntax is "--mirror=<fetch|push>". For
compatibility, we keep "--mirror" as-is, setting up both
types simultaneously.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It doesn't make sense to use "-m" on a mirror, since "-m"
sets up the HEAD symref in the remotes namespace, but with
mirror, we are by definition not using a remotes namespace.
Similarly, it does not make much sense to specify refspecs
with --mirror. For a mirror you plan to push to, those
refspecs will be ignored. For a mirror you are fetching
from, there is no point in mirroring, since the refspec
specifies everything you want to grab.
There is one case where "--mirror -t <X>" would be useful.
Because <X> is used as-is in the refspec, and because we
append it to to refs/, you could mirror a subset of the
hierarchy by doing:
git remote add --mirror -t 'tags/*'
But using anything besides a single branch as an argument to
"-t" is not documented and only happens to work, so closing
it off is not a serious regression.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two configration variables grep.extendedRegexp and grep.lineNumbers to
allow the user to skip typing -E and -n on the command line, respectively.
Scripts that are meant to be used by random users and/or in random
repositories now have use -G and/or --no-line-number options as
appropriately to override the settings in the repository or user's
~/.gitconfig settings. Just because the script didn't say "git grep -n" no
longer guarantees that the output from the command will not have line
numbers.
Signed-off-by: Joe Ratterman <jratt0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
