Before this patch, when using for example:
$ git bisect start <stuff1> <stuff2>
with <stuff1> or <stuff2> that cannot be parsed as a revision, we
could leave a ".git/BISECT_START" file, from a previous
"git bisect start", alone.
This patch makes sure that it does not happen by removing the
"BISECT_START" file in "bisect_clean_state" and then always writing
it again at the end of "bisect_start".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds some test cases to check that "git bisect start"
doesn't leave us in a bad state, especially when it fails.
These test cases show that "git bisect start" is not atomic when it
fails and leave some files like .git/BISECT_START, and in some
cases some refs, over.
The test failures should be fixed in latter commits.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch no error was printed when "git rev-list --bisect-vars"
failed. This can happen when bad and good revs are mistaken.
This patch prints an error message on stderr that describe the likely
failure cause.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a branch named "bisect" or "new-bisect" already was created in the
repo by other means than git bisect, doing a git bisect used to override
the branch without a warning. Now if the branch "bisect" or
"new-bisect" already exists, and it was not created by git bisect itself,
git bisect start fails with an appropriate error message. Additionally,
if checking out a new bisect state fails due to a merge problem, git
bisect cleans up the temporary branch "new-bisect".
The accidental override has been noticed by Andres Salomon, reported
through
http://bugs.debian.org/478647
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.5.4:
git-bisect: make "start", "good" and "skip" succeed or fail atomically
git-am: cope better with an empty Subject: line
Ignore leading empty lines while summarizing merges
bisect: squelch "fatal: ref HEAD not a symref" misleading message
builtin-apply: Show a more descriptive error on failure when opening a patch
Clarify documentation of git-cvsserver, particularly in relation to git-shell
Before this patch, when "git bisect start", "git bisect good" or
"git bisect skip" were called with many revisions, they could fail
after having already marked some revisions as "good", "bad" or
"skip".
This could be especilally bad for "git bisect start" because as
the file ".git/BISECT_NAMES" would not have been written, there
would have been no attempt to clear the marked revisions on a
"git bisect reset". That's because if there is no
".git/BISECT_NAMES" file, nothing is done to clean things up, as
the bisect session is not supposed to have started.
While at it, let's also create the ".git/BISECT_START" file, only
after ".git/BISECT_NAMES" as been created.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.5.4:
bisect: fix bad rev checking in "git bisect good"
revision.c: make --date-order overriddable
Fix section about backdating tags in the git-tag docs
Document option --only of git commit
Documentation/git-request-pull: Fixed a typo ("send" -> "end")
It seems that "git bisect good" and "git bisect skip" have never
properly checked arguments that have been passed to them. As soon
as one of them can be parsed as a SHA1, no error or warning would
be given.
This is because 'git rev-parse --revs-only --no-flags "$@"' always
"exit 0" and outputs all the SHA1 it can found from parsing "$@".
This patch fix this by using, for each "bisect good" argument, the
same logic as for the "bisect bad" argument.
While at it, this patch teaches "bisect bad" to give a meaningfull
error message when it is passed more than one argument.
Note that if "git bisect good" or "git bisect skip" is given some
proper revs and then something that is not a proper rev, then the
first proper revs will still have been marked as "good" or "skip".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-n" syntax is not supported by System V versions of
tail (which prefer "tail -1"). Unfortunately "tail -1" is
not actually POSIX. We had some of both forms in our
scripts.
Since neither form works everywhere, this patch replaces
both with the equivalent sed invocation:
sed -ne '$p'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This error message is very confusing---it doesn't tell the user
anything about how to fix the situation. And the actual fix
for the situation ("git bisect reset") does a checkout of a
potentially random branch, (compared to what the user wants to
be on for the bisect she is starting).
The simplest way to eliminate the confusion is to just make
"git bisect start" do the cleanup itself. There's no significant
loss of safety here since we already have a general safety in
the form of the reflog.
Note: We preserve the warning for any cogito users. We do this
by switching from .git/head-name to .git/BISECT_START for the
extra state, (which is a more descriptive name anyway).
Signed-off-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This error message is very confusing---it doesn't tell the user
anything about how to fix the situation. And the actual fix
for the situation ("git bisect reset") does a checkout of a
potentially random branch, (compared to what the user wants to
be on for the bisect she is starting).
The simplest way to eliminate the confusion is to just make
"git bisect start" do the cleanup itself. There's no significant
loss of safety here since we already have a general safety in
the form of the reflog.
Note: We preserve the warning for any cogito users. We do this
by switching from .git/head-name to .git/BISECT_START for the
extra state, (which is a more descriptive name anyway).
Signed-off-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of insisting on a symbolic ref, bisect now accepts detached
HEADs, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, using "git bisect reset" when not bisecting
did a "git checkout master" for no good reason.
This also happened using "git bisect replay" when not bisecting
because "bisect_replay" starts by calling "bisect_reset".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If refs were ever packed in the middle of bisection, the bisect
refs were not removed from the "packed-refs" file.
This patch fixes this problem by using "git update-ref -d $ref $hash"
in "bisect_clean_state".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is incompatible with previous versions because an exit code
of 125 used to mark current commit as "bad". But hopefully this exit
code is not much used by test scripts or other programs. (126 and 127
are used by POSIX compliant shells to mean "found but not
executable" and "command not found", respectively.)
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are some "skip"ped revisions, we add the '--bisect-all'
option to "git rev-list --bisect-vars". Then we filter out the
"skip"ped revisions from the result of the rev-list command, and we
modify the "bisect_rev" var accordingly.
We don't always use "--bisect-all" because it is slower
than "--bisect-vars" or "--bisect".
When we cannot find for sure the first bad commit because of
"skip"ped commits, we print the hash of each possible first bad
commit and then we exit with code 2.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of running rev-list and picking earlier lines using head/tail pipeline,
grab commit object name as we build commits. This also removes a non POSIX
use of tail with -linenum (more posixly-correct way to say it is "-n linenum")
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: also fix 0a5280a9 that incorrectly changed the title of one test.]
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
