This hashmap_entry_init function is intended to take a
hashmap_entry struct pointer, not a hashmap struct pointer.
This was not noticed because hashmap_entry_init takes a "void *"
arg instead of "struct hashmap_entry *", and the hashmap struct
is larger and can be cast into a hashmap_entry struct without
data corruption.
This has the beneficial side effect of reducing the size of
a delta_base_cache_entry from 104 bytes to 72 bytes on 64-bit
systems.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Assigning hashmap_entry.hash manually leaves hashmap_entry.next
uninitialized, which can be dangerous once the hashmap_entry is
inserted into a hashmap. Detect those assignments and use
hashmap_entry_init, instead.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, the hashmap_entry.next field appears to remain
uninitialized, which can lead to problems when
add_lines_to_move_detection calls hashmap_add.
I found this through manual inspection when converting
hashmap_add callers to take "struct hashmap_entry *".
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests print a file before searching for a pattern using
test_i18ngrep. This is useful when debugging tests with --verbose when
the pattern is not found as expected.
Since 63b1a175ee (t: make 'test_i18ngrep' more informative on failure,
2018-02-08) test_i18ngrep already shows the contents of a file that
doesn't match the expected pattern, though.
So don't bother doing the same unconditionally up-front. The contents
are not interesting if the expected pattern is found, and showing it
twice if it doesn't match is of no use.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid double-open exceptions on Windows platform when
calculating for lfs compressed size threshold
(git-p4.largeFileCompressedThreshold) comparisons.
Take new approach using the NamedTemporaryFile()
file-like object as input to the ZipFile() which
auto-deletes after implicit close leaving with scope.
Original code had double-open exception on Windows
platform because file still open from NamedTemporaryFile()
using generated filename instead of object.
Thanks to Andrey for patiently suggesting several
iterations on this change for avoiding exceptions!
Also print error details after resulting IOError to make
debugging cause of exception less mysterious when it has
nothing to do with "git version recent enough."
Signed-off-by: Philip.McGraw <Philip.McGraw@bentley.com>
Reviewed-by: Andrey Mazo <ahippo@yandex.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure the grep machinery does not abort when seeing a payload
that is not UTF-8 even when JIT is not in use with PCRE1.
* cb/skip-utf8-check-with-pcre1:
grep: skip UTF8 checks explicitly
The markup used in user-manual has been updated to work better with
asciidoctor.
* ma/user-manual-markup-update:
user-manual.txt: render ASCII art correctly under Asciidoctor
asciidoctor-extensions.rb: handle "book" doctype in linkgit
user-manual.txt: change header notation
user-manual.txt: add missing section label
Start using DocBook 5 (instead of DocBook 4.5) as Asciidoctor 2.0
no longer works with the older one.
* bc/doc-use-docbook-5:
Documentation: fix build with Asciidoctor 2
Update support for Asciidoctor documentation toolchain.
* ma/asciidoctor-refmiscinfo:
doc-diff: replace --cut-header-footer with --cut-footer
asciidoctor-extensions: provide `<refmiscinfo/>`
Doc/Makefile: give mansource/-version/-manual attributes
The synopsis section in git-rev-list.txt has grown to be a huge list
that probably needs its own synopsis. Since the list is huge, users may
be given the false impression that the list is complete, however it is
not. It is missing many of the available options.
Since the list of options in the synopsis is not only annoying but
actively harmful, replace it with `[<options>]` so users know to
explicitly look through the documentation for further information.
While we're at it, update the optional path notation so that it is more
modern.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Strip "UTF" and an optional dash from the start of 'upper' without
passing a NULL pointer to skip_prefix() in the second call, as it cannot
handle that.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
... because we can, now. Technically, we actually build using `MSBuild`,
which is however pretty close to building interactively in Visual
Studio.
As there is no convenient way to run Git's test suite in Visual Studio,
we unpack a Portable Git to run it, using the just-added test helper to
allow running test scripts in parallel.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was a left-over from the previous YAML schema, and it no longer
works. The problem was noticed while editing `azure-pipelines.yml` in VS
Code with the very helpful "Azure Pipelines" extension (syntax
highlighting and intellisense for `azure-pipelines.yml`...).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the `--immediate` option is in effect, any test failure will
immediately exit the test script. Together with `--write-junit-xml`, we
will want the JUnit-style `.xml` file to be finalized (and not leave the
XML incomplete). Let's make it so.
This comes in particularly handy when trying to debug via Azure
Pipelines, where the JUnit-style XML is consumed to present the test
results in an informative and helpful way.
While at it, also handle the `error()` code path.
The only remaining code path that sets `GIT_EXIT_OK` happens whenever
the trash directory could not be set up, i.e. long before the JUnit XML
was written, therefore we should _not_ try to finalize that XML in that
case.
It is tempting to change the `immediate` code path to just hand off to
`error`, simplifying the code in the process. That would, however,
result in a change of behavior (an additional error message) in the test
suite, which is outside of the purview of the current patch series: its
goal is to allow building Git with Visual Studio and testing it with a
portable version of Git for Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git for Windows jumps through hoops to provide a development environment
that allows to build Git and to run its test suite. To that end, an
entire MSYS2 system, including GNU make and GCC is offered as "the Git
for Windows SDK". It does come at a price: an initial download of said
SDK weighs in with several hundreds of megabytes, and the unpacked SDK
occupies ~2GB of disk space.
A much more native development environment on Windows is Visual Studio.
To help contributors use that environment, we already have a Makefile
target `vcxproj` that generates a commit with project files (and other
generated files), and Git for Windows' `vs/master` branch is
continuously re-generated using that target.
The idea is to allow building Git in Visual Studio, and to run
individual tests using a Portable Git.
The one missing thing is a way to run the entire test suite: neither
`make` nor `prove` are required to run Git, therefore Git for Windows
does not support those commands in the Portable Git.
To help with that, add a simple test helper that exercises the
`run_processes_parallel()` function to allow for running test scripts in
parallel (which is really necessary, especially on Windows, as Git's
test suite takes such a long time to run).
This will also come in handy for the upcoming change to our Azure
Pipeline: we will use this helper in a Portable Git to test the Visual
Studio build of Git.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the CI builds, we bundle all generated files into a so-called
artifacts `.tar` file, so that the test phase can fan out into multiple
parallel builds.
This patch makes sure that all files are included in the `vcxproj`
target which are needed for that artifacts `.tar` file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In b18ae14a8f (vcxproj: also link-or-copy builtins, 2019-07-29), we
started to copy or hard-link the built-ins as a post-build step of the
`git` project.
At the same time, we tried to copy or hard-link `git-remote-http.exe`,
but it is quite possible that it was not built at that time.
Let's move that latter task into a post-install step of the
`git-remote-http` project instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value of that function is 0 both for variables that are
unset, as well as for variables whose values are empty. To discern those
two cases, one has to call `GetLastError()`, whose return value is
`ERROR_ENVVAR_NOT_FOUND` and `ERROR_SUCCESS`, respectively.
Except that it is not actually set to `ERROR_SUCCESS` in the latter
case, apparently, but the last error value seems to be simply unchanged.
To work around this, let's just re-set the last error value just before
inspecting the environment variable.
This fixes a problem that triggers failures in t3301-notes.sh (where we
try to override config settings by passing empty values for certain
environment variables).
This problem is hidden in the MINGW build by the fact that older
MSVC runtimes (such as the one used by MINGW builds) have a `calloc()`
that re-sets the last error value in case of success, while newer
runtimes set the error value only if `NULL` is returned by that
function.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We frequently build Git using the `DEVELOPER=1` make setting as a
shortcut to enable all kinds of more stringent compiler warnings.
Those compiler warnings are relatively specific to GCC, though, so let's
try our best to translate them to the equivalent options to pass to MS
Visual C++'s `cl.exe`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To build with MSVC, we "translate" GCC options to MSVC options, and part
of those options refer to the libraries to link into the final
executable. Currently, this part looks somewhat like this on Windows:
-lcurl -lnghttp2 -lidn2 -lssl -lcrypto -lssl -lcrypto -lgdi32
-lcrypt32 -lwldap32 -lz -lws2_32 -lexpat
Some of those are direct dependencies (such as curl and ssl) and others
are indirect (nghttp2 and idn2, for example, are dependencies of curl,
but need to be linked in for reasons).
We already handle the direct dependencies, e.g. `-liconv` is already
handled as adding `libiconv.lib` to the list of libraries to link
against.
Let's just ignore the remaining `-l*` options so that MSVC does not have
to warn us that it ignored e.g. the `/lnghttp2` option. We do that by
extending the clause that already "eats" the `-R*` options to also eat
the `-l*` options.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the common guards that allow headers to be #include'd multiple
times.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MSVC would complain thusly:
C4200: nonstandard extension used: zero-sized array in struct/union
Let's just use the `FLEX_ARRAY` constant that we introduced for exactly
this type of scenario.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MSVC complains about this with `-Wall`, which can be taken as a sign
that this is indeed a real bug. The symptom is:
C4146: unary minus operator applied to unsigned type, result
still unsigned
Let's avoid this warning in the minimal way, e.g. writing `-1 -
<unsigned value>` instead of `-<unsigned value> - 1`.
Note that the change in the `estimate_cache_size()` function is
needed because MSVC considers the "return type" of the `sizeof()`
operator to be `size_t`, i.e. unsigned, and therefore it cannot be
negated using the unary minus operator.
Even worse, that arithmetic is doing extra work, in vain. We want to
calculate the entry extra cache size as the difference between the
size of the `cache_entry` structure minus the size of the
`ondisk_cache_entry` structure, padded to the appropriate alignment
boundary.
To that end, we start by assigning that difference to the `per_entry`
variable, and then abuse the `len` parameter of the
`align_padding_size()` macro to take the negative size of the ondisk
entry size. Essentially, we try to avoid passing the already calculated
difference to that macro by passing the operands of that difference
instead, when the macro expects operands of an addition:
#define align_padding_size(size, len) \
((size + (len) + 8) & ~7) - (size + len)
Currently, we pass A and -B to that macro instead of passing A - B and
0, where A - B is already stored in the `per_entry` variable, ready to
be used.
This is neither necessary, nor intuitive. Let's fix this, and have code
that is both easier to read and that also does not trigger MSVC's
warning.
While at it, we take care of reporting overflows (which are unlikely,
but hey, defensive programming is good!).
We _also_ take pains of casting the unsigned value to signed: otherwise,
the signed operand (i.e. the `-1`) would be cast to unsigned before
doing the arithmetic.
Helped-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When Git wants to spawn a child Git process inside a worktree's
subdirectory while `GIT_DIR` is set, we need to take care of specifying
the work tree's top-level directory explicitly because it cannot be
discovered: the current directory is _not_ the top-level directory of
the work tree, and neither is it inside the parent directory of
`GIT_DIR`.
This fixes the problem where `git stash apply` would report pretty much
everything deleted or untracked when run inside a worktree's
subdirectory.
To make sure that we do not introduce the "reverse problem", i.e. when
`GIT_WORK_TREE` is defined but `GIT_DIR` is not, we simply make sure
that both are set.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far, `--jobs=<n>` only parallelizes submodule fetches/clones, not
`--multiple` fetches, which is unintuitive, given that the option's name
does not say anything about submodules in particular.
Let's change that. With this patch, also fetches from multiple remotes
are parallelized.
For backwards-compatibility (and to prepare for a use case where
submodule and multiple-remote fetches may need different parallelization
limits), the config setting `submodule.fetchJobs` still only controls
the submodule part of `git fetch`, while the newly-introduced setting
`fetch.parallel` controls both (but can be overridden for submodules
with `submodule.fetchJobs`).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "discard" event type for trace2 event destinations. When the
trace2 file count check creates a sentinel file, it will include the
normal trace2 output in the sentinel, along with this new discard
event.
Writing this message into the sentinel file is useful for tracking how
often the file count check triggers in practice.
Bump up the event format version since we've added a new event type.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
trace2 can write files into a target directory. With heavy usage, this
directory can fill up with files, causing difficulty for
trace-processing systems.
This patch adds a config option (trace2.maxFiles) to set a maximum
number of files that trace2 will write to a target directory. The
following behavior is enabled when the maxFiles is set to a positive
integer:
When trace2 would write a file to a target directory, first check
whether or not the traces should be discarded. Traces should be
discarded if:
* there is a sentinel file declaring that there are too many files
* OR, the number of files exceeds trace2.maxFiles.
In the latter case, we create a sentinel file named git-trace2-discard
to speed up future checks.
The assumption is that a separate trace-processing system is dealing
with the generated traces; once it processes and removes the sentinel
file, it should be safe to generate new trace files again.
The default value for trace2.maxFiles is zero, which disables the file
count check.
The config can also be overridden with a new environment variable:
GIT_TRACE2_MAX_FILES.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The graph coloring logic for octopus merges currently has a bug. This
can be seen git.git with 74c7cfa875 (Merge of
http://members.cox.net/junkio/git-jc.git, 2005-05-05), whose second
child is 211232bae6 (Octopus merge of the following five patches.,
2005-05-05).
If one runs
git log --graph 74c7cfa875
one can see that the octopus merge is colored incorrectly. In
particular, the horizontal dashes are off by one color. Each horizontal
dash should be the color of the line to their bottom-right. Instead, they
are currently the color of the line to their bottom.
Demonstrate this breakage with a few sets of test cases. These test
cases should show not only simple cases of the bug occuring but trickier
situations that may not be handled properly in any attempt to fix the
bug.
While we're at it, include a passing test case as a canary in case an
attempt to fix the bug breaks existing operation.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a future test case, we will be extending the commit graph. As a
result, explicitly list the tags that will generate the graph so that
when future additions are made, the current graph illustrations won't be
affected.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, the expect files of the test case were being generated in the
setup method. However, it would make more sense to generate these files
within the test cases that actually use them so that it's obvious to
future readers where the expected values are coming from.
Move the generation of the expect files in their own respective test
cases.
While we're at it, we want to establish a pattern in this test suite
that, firstly, a non-colored test case is given then, immediately after,
the colored version is given.
Switch test cases "log --graph with tricky octopus merge, no color" and
"log --graph with tricky octopus merge with colors" so that the "no
color" version appears first.
This patch is best viewed with `--color-moved`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, we extended test_merge() so that it could
perform octopus merges. Now that the restriction is lifted, use
test_merge() to perform the octopus merge instead of manually
duplicating test_merge() functionality.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently test_merge() only allows developers to merge in one branch.
However, this restriction is artificial and there is no reason why it
needs to be this way.
Extend test_merge() to allow the specification of multiple branches so
that octopus merges can be performed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it explicit that we always want trace2 "version" events to be the
first event of any trace session. Also list the changes that would or
would not cause the EVENT format version field to be incremented.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the description of trace2's target-directory behavior into the
shared trace2-target-values file so that it is included in both the
git-config and api-trace2 docs. Leave the SID discussion only in
api-trace2 since it's a technical detail.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Found with "git grep '^#include ' '*.c' | sort | uniq -d".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is marked as `NORETURN`, and it indeed does not want to
return anything. So let's not declare it with the return type `int`.
This fixes the following warning when building with MSVC:
C4646: function declared with 'noreturn' has non-void return type
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Multiple changes here:
* add a test for a tag of a blob
* add a test for a tag of a tag of a commit
* add a comment to the tests for (possibly nested) tags of trees,
making it clear that these tests are doing much less than you might
expect
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option, --mark-tags, which will output mark identifiers with
each tag object. This improves the incremental export story with
--export-marks since it will allow us to record that annotated tags have
been exported, and it is also needed as a step towards supporting nested
tags.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import has support for both an --import-marks flag and an
--import-marks-if-exists flag; the latter of which will not die() if the
file does not exist. fast-export only had support for an --import-marks
flag; add an --import-marks-if-exists flag for consistency.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-export and fast-import have nice --import-marks flags which allow
for incremental migrations. However, if there is a mark in
fast-export's file of marks without a corresponding mark in the one for
fast-import, then we run the risk that fast-export tries to send new
objects relative to the mark it knows which fast-import does not,
causing fast-import to fail.
This arises in practice when there is a filter of some sort running
between the fast-export and fast-import processes which prunes some
commits programmatically. Provide such a filter with the ability to
alias pruned commits to their most recent non-pruned ancestor.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark identifiers are used in fast-export and fast-import to provide a
label to refer to earlier content. Blobs are given labels because they
need to be referenced in the commits where they first appear with a
given filename, and commits are given labels because they can be the
parents of other commits. Tags were never given labels, probably
because they were viewed as unnecessary, but that presents two problems:
1. It leaves us without a way of referring to previous tags if we
want to create a tag of a tag (or higher nestings).
2. It leaves us with no way of recording that a tag has already been
imported when using --export-marks and --import-marks.
Fix these problems by allowing an optional mark label for tags.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If our input stream includes a tag which is later deleted, we were not
properly deleting it. We did have a step which would delete it, but we
left a tag in the tag list noting that it needed to be updated, and the
updating of annotated tags occurred AFTER ref deletion. So, when we
record that a tag needs to be deleted, also remove it from the list of
annotated tags to update.
While this has likely been something that has not happened in practice,
it will come up more in order to support nested tags. For nested tags,
we either need to give temporary names to the intermediate tags and then
delete them, or else we need to use the final name for the intermediate
tags. If we use the final name for the intermediate tags, then in order
to keep the sanity check that someone doesn't try to update the same tag
twice, we need to delete the ref after creating the intermediate tag.
So, either way nested tags imply the need to delete temporary inner tag
references.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Report the current hunk count and total number of hunks for the
current file in the prompt. Also adjust the expected output in
some tests to match.
Signed-off-by: Kunal Tyagi <tyagi.kunal@live.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gui now highlights diff3 style conflicts properly. As an auxiliary
change, querying a path's attribute is done via the existing interface
instead of hand-rolling the code.
* bw/diff3-conflict-style:
git-gui: support for diff3 conflict style
git-gui: use existing interface to query a path's attribute
