"git status --branch --porcelain" displays the status of the branch
(ahead, behind, gone), and used gettext to translate the string.
Use hardcoded strings when --porcelain is used, but keep the gettext
translation for "git status --short" which is essentially the same, but
meant to be read by a human.
Reported-by: Anarky <ghostanarky@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The version numbering scheme has changed since Git 1.9 and we
dropped the third dewey-decimal from the traditional numbering
(e.g. both 1.8.4 and 1.8.5 were major feature releases). This
release 1.9.1 is the first maintenance relase for Git 1.9.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clean -d pathspec" did not use the given pathspec correctly
and ended up cleaning too much.
* jk/clean-d-pathspec:
clean: simplify dir/not-dir logic
clean: respect pathspecs with "-d"
"git difftool" misbehaved when the repository is bound to the
working tree with the ".git file" mechanism, where a textual file
".git" tells us where it is.
* da/difftool-git-files:
t7800: add a difftool test for .git-files
difftool: support repositories with .git-files
"git push" did not pay attention to branch.*.pushremote if it is
defined earlier than remote.pushdefault; the order of these two
variables in the configuration file should not matter, but it did by
mistake.
* jk/remote-pushremote-config-reading:
remote: handle pushremote config in any order
Codepaths that parse timestamps in commit objects have been
tightened.
* jk/commit-dates-parsing-fix:
show_ident_date: fix tz range check
log: do not segfault on gmtime errors
log: handle integer overflow in timestamps
date: check date overflow against time_t
fsck: report integer overflow in author timestamps
t4212: test bogus timestamps with git-log
"git diff --external-diff" incorrectly fed the submodule directory
in the working tree to the external diff driver when it knew it is
the same as one of the versions being compared.
* tr/diff-submodule-no-reuse-worktree:
diff: do not reuse_worktree_file for submodules
"git reset" needs to refresh the index when working in a working
tree (it can also be used to match the index to the HEAD in an
otherwise bare repository), but it failed to set up the working
tree properly, causing GIT_WORK_TREE to be ignored.
* nd/reset-setup-worktree:
reset: optionally setup worktree and refresh index on --mixed
"git check-attr" when working on a repository with a working tree
did not work well when the working tree was specified via the
--work-tree (and obviously with --git-dir) option.
* jc/check-attr-honor-working-tree:
check-attr: move to the top of working tree when in non-bare repository
t0003: do not chdir the whole test process
"merge-recursive" was broken in 1.7.7 era and stopped working in an
empty (temporary) working tree, when there are renames involved.
This has been corrected.
* bk/refresh-missing-ok-in-merge-recursive:
merge-recursive.c: tolerate missing files while refreshing index
read-cache.c: extend make_cache_entry refresh flag with options
read-cache.c: refactor --ignore-missing implementation
t3030-merge-recursive: test known breakage with empty work tree
"git rev-parse" was loose in rejecting command line arguments that
do not make sense, e.g. "--default" without the required value for
that option.
* ds/rev-parse-required-args:
rev-parse: check i before using argv[i] against argc
include.path variable (or any variable that expects a path that can
use ~username expansion) in the configuration file is not a boolean,
but the code failed to check it.
* jk/config-path-include-fix:
handle_path_include: don't look at NULL value
expand_user_path: do not look at NULL path
"git diff --quiet -- pathspec1 pathspec2" sometimes did not return
correct status value.
* nd/diff-quiet-stat-dirty:
diff: do not quit early on stat-dirty files
diff.c: move diffcore_skip_stat_unmatch core logic out for reuse later
Attempting to deepen a shallow repository by fetching over smart
HTTP transport failed in the protocol exchange, when no-done
extension was used. The fetching side waited for the list of
shallow boundary commits after the sending end stopped talking to
it.
* nd/http-fetch-shallow-fix:
t5537: move http tests out to t5539
fetch-pack: fix deepen shallow over smart http with no-done cap
protocol-capabilities.txt: document no-done
protocol-capabilities.txt: refer multi_ack_detailed back to pack-protocol.txt
pack-protocol.txt: clarify 'obj-id' in the last ACK after 'done'
test: rename http fetch and push test files
tests: auto-set LIB_HTTPD_PORT from test name
Allow "git cmd path/", when the 'path' is where a submodule is
bound to the top-level working tree, to match 'path', despite the
extra and unnecessary trailing slash (such a slash is often
given by command line completion).
* nd/submodule-pathspec-ending-with-slash:
clean: use cache_name_is_other()
clean: replace match_pathspec() with dir_path_match()
pathspec: pass directory indicator to match_pathspec_item()
match_pathspec: match pathspec "foo/" against directory "foo"
dir.c: prepare match_pathspec_item for taking more flags
pathspec: rename match_pathspec_depth() to match_pathspec()
pathspec: convert some match_pathspec_depth() to dir_path_match()
pathspec: convert some match_pathspec_depth() to ce_path_match()
In some places we "echo" a string that is supplied by the calling
test script and may contain backslash sequences. The echo command
of some shells, most notably "dash", interprets these backslash
sequences (POSIX.1 allows this) which may scramble the test
output.
Signed-off-by: Uwe Storbeck <uwe@ibr.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- update 'no editor' hook test and add 'editor' hook test
- make sure the tree is reset to a clean state after running a test
(using test_when_finished) so later tests are not impacted
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't set GIT_EDITOR to ":" when calling prepare-commit-msg hook if the
editor is going to be called (e.g. with "merge -e").
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't change git environment: move the GIT_EDITOR=":" override to the
hook command subprocess, like it's already done for GIT_INDEX_FILE.
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add (failing) tests: with commit changing the environment to let hooks
know that no editor will be used (by setting GIT_EDITOR to ":"), the
"edit hunk" functionality does not work (no editor is launched and the
whole hunk is committed).
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace git-pull and git-merge with the corresponding un-hyphenated
versions. While at it, use ` to mark it up instead of '.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We feed a string pointer that is potentially NULL to die() when
showing the message. Don't.
Noticed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before writing the shallow file, we stat() the existing file
to make sure it has not been updated since our operation
began. However, we do not do so under a lock, so there is a
possible race:
1. Process A takes the lock.
2. Process B calls check_shallow_file_for_update and finds
no update.
3. Process A commits the lockfile.
4. Process B takes the lock, then overwrite's process A's
changes.
We can fix this by doing our check while we hold the lock.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some places we "echo" a string that comes from a commit log
message, which may have a backslash sequence that is interpreted by
the command (POSIX.1 allows this), most notably "dash"'s built-in
'echo'.
A commit message which contains the string '\n' (or ends with the
string '\c') may result in a garbage line in the todo list of an
interactive rebase which causes the rebase to fail.
To reproduce the behavior (with dash as /bin/sh):
mkdir test && cd test && git init
echo 1 >foo && git add foo
git commit -m"this commit message ends with '\n'"
echo 2 >foo && git commit -a --fixup HEAD
git rebase -i --autosquash --root
Now the editor opens with garbage in line 3 which has to be
removed or the rebase fails.
Signed-off-by: Uwe Storbeck <uwe@ibr.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We shrink the source and destination arrays, but not the modes or
submodule_gitfile arrays, resulting in potentially mismatched data. Shrink
all the arrays at the same time to prevent this. Add tests to ensure the
problem does not recur.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When lib-terminal.sh is sourced by a test script, we
immediately set up the TTY prerequisite. We do so inside a
test_expect_success, because that nicely isolates any
generated output.
However, this early test can interfere with a script that
later wants to skip all tests (e.g., t5541 then goes on to
set up the httpd server, and wants to skip_all if that
fails). TAP output doesn't let us skip everything after we
have already run at least one test.
We could fix this by reordering the inclusion of
lib-terminal.sh in t5541 to go after the httpd setup. That
solves this case, but we might eventually hit a case with
circular dependencies, where either lib-*.sh include might
want to skip_all after the other has run a test. So
instead, let's just remove the ordering constraint entirely
by doing the setup inside a test_lazy_prereq construct,
rather than in a regular test. We never cared about the
test outcome anyway (it was written to always succeed).
Note that in addition to setting up the prerequisite, the
current test also defines test_terminal. Since we can't
affect the environment from a lazy_prereq, we have to hoist
that out. We previously depended on it _not_ being defined
when the TTY prereq isn't set as a way to ensure that tests
properly declare their dependency on TTY. However, we still
cover the case (see the in-code comment for details).
Reported-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
remove_subtree() manipulated path in a fixed-size buffer even though
the length of the input, let alone the length of entries within the
directory, were not known in advance. Change the function to take a
strbuf argument and use that object as its scratch space.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to break out the "buf" and "len" members into
separate temporary variables. Rename path_buf to path and use
path.buf and path.len directly. This makes it easier to reason about
the data flow in the function.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we show unmerged paths, we had an artificial 20 columns floor
for the width of labels (e.g. "both deleted:") shown next to the
pathnames. Depending on the locale, this may result in a label that
is too wide when all the label strings are way shorter than 20
columns, or no-op when a label string is longer than 20 columns.
Just drop the artificial floor. The screen real estate is better
utilized this way when all the strings are shorter.
Adjust the tests to this change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original code assumes that:
(1) the number of bytes written is the width of a string, so they
can line up;
(2) the "how" string is always <= 19 bytes.
Neither of which we should assume.
Using the same approach as the earlier 3651e45c (wt-status: take the
alignment burden off translators, 2013-11-05), compute the necessary
column width to hold the longest label and use that for alignment.
cf. http://bugs.debian.org/725777
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Sandy Carter
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier in 3651e45c (wt-status: take the alignment burden off
translators, 2013-11-05), we assumed that it is OK to make the
string before the colon in a label string we give as the section
header of various kinds of changes (e.g. "new file:") translatable.
This assumption apparently does not hold for some languages,
e.g. ones that want to have spaces around the colon.
Also introduce a static label_width to avoid having to run
strlen(padding) over and over.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit a88c915 (mv: move submodules using a gitfile, 2013-07-30)
added the submodule_gitfile array, it was not added to the block that
enlarges the arrays when we are moving a directory so that we do not
have to worry about it being a directory when we perform the actual
move. After this, the loop continues over the enlarged set of sources.
Since we assume that submodule_gitfile has size argc, if any of the
items in the source directory are submodules we are guaranteed to write
beyond the end of submodule_gitfile.
Fix this by realloc'ing submodule_gitfile at the same time as the other
arrays.
Reported-by: Guillaume Gelin <contact@ramnes.eu>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we get a list of paths from read_directory, we further
prune it to create the final list of items to remove. The
code paths for directories and non-directories repeat the
same "add to list" code.
This patch restructures the code so that we don't repeat
ourselves. Also, by following a "if (condition) continue"
pattern like the pathspec check above, it makes it more
obvious that the conditional is about excluding directories
under certain circumstances.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clean uses read_directory to fill in a `struct dir` with
potential hits. However, read_directory does not actually
check against our pathspec. It uses a simplified version
that may turn up false positives. As a result, we need to
check that any hits match our pathspec. We do so reliably
for non-directories. For directories, if "-d" is not given
we check that the pathspec matched exactly (i.e., we are
even stricter, and require an explicit "git clean foo" to
clean "foo/"). But if "-d" is given, rather than relaxing
the exact match to allow a recursive match, we do not check
the pathspec at all.
This regression was introduced in 113f10f (Make git-clean a
builtin, 2007-11-11).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 1dca155fe3 (log: handle integer overflow in
timestamps, 2014-02-24) tried to catch integer overflow
coming from strtol() on the timezone field by comparing against
LONG_MIN/LONG_MAX. However, the intermediate "tz" variable
is an "int", which means it can never be LONG_MAX on LP64
systems; we would truncate the output from strtol before the
comparison.
Clang's -Wtautological-constant-out-of-range-compare notices
this and rightly complains.
Let's instead store the result of strtol in a long, and then
compare it against INT_MIN/INT_MAX. This will catch overflow
from strtol, and also overflow when we pass the result as an
int to show_date.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing leading dash to proposed commands in french output when
using the command:
git branch --set-upstream remotename/branchname
and when upstream is gone
Signed-off-by: Sandy Carter <sandy.carter@savoirfairelinux.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a remote has multiple fetch refspecs and these overlap in the
target namespace, fetch may prune a remote-tracking branch which still
exists in the remote. The test uses a popular form of this, by putting
pull requests as stored in a popular hosting platform alongside "real"
remote-tracking branches.
The fetch command makes a decision of whether to prune based
on the first matching refspec, which in this case is insufficient, as it
covers the pull request names. This pair of refspecs does work as
expected if the more "specific" refspec is the first in the list.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes write tempfiles of the form "shallow_XXXXXX"
during fetch/push operations with shallow repositories.
Under normal circumstances, we clean up the result when we
are done. However, we do no take steps to clean up after
ourselves when we exit due to die() or signal death.
This patch teaches the tempfile creation code to register
handlers to clean up after ourselves. To handle this, we
change the ownership semantics of the filename returned by
setup_temporary_shallow. It now keeps a copy of the filename
itself, and returns only a const pointer to it.
We can also do away with explicit tempfile removal in the
callers. They all exit not long after finishing with the
file, so they can rely on the auto-cleanup, simplifying the
code.
Note that we keep things simple and maintain only a single
filename to be cleaned. This is sufficient for the current
caller, but we future-proof it with a die("BUG").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are about to write the shallow file, we check that
it has not changed since we last read it. Instead of
hand-rolling this, we can use stat_validity. This is built
around the index stat-check, so it is more robust than just
checking the mtime, as we do now (it uses the same check as
we do for index files).
The new code also handles the case of a shallow file
appearing unexpectedly. With the current code, two
simultaneous processes making us shallow (e.g., two "git
fetch --depth=1" running at the same time in a non-shallow
repository) can race to overwrite each other.
As a bonus, we also remove a race in determining the stat
information of what we read (we stat and then open, leaving
a race window; instead we should open and then fstat the
descriptor).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When QUICK is set (i.e. with --quiet) we try to do as little work as
possible, stopping after seeing the first change. stat-dirty is
considered a "change" but it may turn out not, if no actual content is
changed. The actual content test is performed too late in the process
and the shortcut may be taken prematurely, leading to incorrect return
code.
Assume we do "git diff --quiet". If we have a stat-dirty file "a" and
a really dirty file "b". We break the loop in run_diff_files() and
stop after "a" because we have got a "change". Later in
diffcore_skip_stat_unmatch() we find out "a" is actually not
changed. But there's nothing else in the diff queue, we incorrectly
declare "no change", ignoring the fact that "b" is changed.
This also happens to "git diff --quiet HEAD" when it hits
diff_can_quit_early() in oneway_diff().
This patch does the content test earlier in order to keep going if "a"
is unchanged. The test result is cached so that when
diffcore_skip_stat_unmatch() is done in the end, we spend no cycles on
re-testing "a".
Reported-by: IWAMOTO Toshihiro <iwamoto@valinux.co.jp>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_clean() has the exact same code of index_name_is_other(). Reduce
code duplication.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This instance was left out when many match_pathspec() call sites that
take input from dir_entry were converted to dir_path_match() because
it passed a path with the trailing slash stripped out to match_pathspec()
while the others did not. Stripping for all call sites back then would
be a regression because match_pathspec() did not know how to match
pathspec foo/ against _directory_ foo (the stripped version of path
"foo/").
match_pathspec() knows how to do it now. And dir_path_match() strips
the trailing slash also. Use the new function, because the stripping
code is removed in the next patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch activates the DO_MATCH_DIRECTORY code in m_p_i(), which
makes "git diff HEAD submodule/" and "git diff HEAD submodule" produce
the same output. Previously only the version without trailing slash
returns the difference (if any).
That's the effect of new ce_path_match(). dir_path_match() is not
executed by the new tests. And it should not introduce regressions.
Previously if path "dir/" is passed in with pathspec "dir/", they
obviously match. With new dir_path_match(), the path becomes
_directory_ "dir" vs pathspec "dir/", which is not executed by the old
code path in m_p_i(). The new code path is executed and produces the
same result.
The other case is pathspec "dir" and path "dir/" is now turned to
"dir" (with DO_MATCH_DIRECTORY). Still the same result before or after
the patch.
So why change? Because of the next patch about clean.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
