Various codepaths checked if two encoding names are the same using
ad-hoc code and some of them ended up asking iconv() to convert
between "utf8" and "UTF-8". The former is not a valid way to spell
the encoding name, but often people use it by mistake, and we
equated them in some but not all codepaths. Introduce a new helper
function to make these codepaths consistent.
* jc/same-encoding:
reencode_string(): introduce and use same_encoding()
"git diff --stat" miscounted the total number of changed lines when
binary files were involved and hidden beyond --stat-count. It also
miscounted the total number of changed files when there were
unmerged paths.
* lt/diff-stat-show-0-lines:
t4049: refocus tests
diff --shortstat: do not count "unmerged" entries
diff --stat: do not count "unmerged" entries
diff --stat: move the "total count" logic to the last loop
diff --stat: use "file" temporary variable to refer to data->files[i]
diff --stat: status of unmodified pair in diff-q is not zero
test: add failing tests for "diff --stat" to t4049
Fix "git diff --stat" for interesting - but empty - file changes
The documentation was misleading in that it gave the impression that
'for-push' could be used as a ref attribute in the output of the
'list' command. That is wrong.
Also, explicitly point out the connection between the commands
'list' and 'options' on the one hand, and the sections
'REF LIST ATTRIBUTES' and 'OPTIONS' on the other hand.
Signed-off-by: Max Horn <max@quendi.de>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, document 'list for-push' separately from 'list', as
the former needs only be supported for the push/export
capabilities, and the latter only for fetch/import. Indeed, a
hypothetically 'push-only' helper would only need to support the
former, not the latter.
Signed-off-by: Max Horn <max@quendi.de>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also remove some duplication in the descriptions
(e.g. refspec was explained twice with similar level of detail).
Signed-off-by: Max Horn <max@quendi.de>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specifically, document the 'export' and '(im|ex)port-marks'
capabilities as well as the export command, which were
undocumented (but in active use).
Signed-off-by: Max Horn <max@quendi.de>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the distant past, the order things were documented was
'Invocation', 'Commands', 'Capabilities', ...
Then it was decided that before giving a list of Commands, there
should be an overall description of the 'Input format', which was
a wise decision. However, this description was put as the very
first thing, with the rationale that any implementor would want
to know that first.
However, it seems an implementor would actually first need to
know how the remote helper will be invoked, so moving
'Invocation' to the front again seems logical. Moreover, we now
don't switch from discussing the input format to the invocation
style and then back to input related stuff.
Signed-off-by: Max Horn <max@quendi.de>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate 825 new messages came from git.pot update in
cc76011 ("l10n: Update git.pot (825 new, 24 removed messages)").
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Reviewed-by: Thomas Rast <trast@student.ethz.ch>
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Document that 'git svn' will import SVN tags as branches.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe what the option --follow-parent does, and what happens if it is
set or unset.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that when using git svn, one should usually either use the
directory structure options to import branches as branches, or only
import one subdirectory. The default behaviour of cloning all branches
and tags as subdirectories in the working copy is usually not what the
user wants.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git svn sometimes creates branches with an at-sign in the name
(branchname@revision). These branches confuse many users and it is a FAQ
why they are created. Document when git svn creates them.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no remaining call-sites, and as pointed out in the
previous commit message, it's not quite ideal. So let's just
lose it.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The getpass-implementation we use on Windows isn't at all ideal;
it works in raw-mode (as opposed to cooked mode), and as a result
does not deal correcly with deletion, arrow-keys etc.
Instead, use cooked mode to read a line at the time, allowing the
C run-time to process the input properly.
Since we set files to be opened in binary-mode by default on
Windows, introduce a FORCE_TEXT macro that expands to the "t"
modifier that forces the terminal to be opened in text-mode so we
do not have to deal with CRLF issues.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, the terminal cannot be opened in read-write mode, so
we need distinct pairs for reading and writing. Since this works
fine on other platforms as well, always open them in pairs.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By moving the echo-disabling code to a separate function, we can
implement OS-specific versions of it for non-POSIX platforms.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set a control-handler to prevent the process from terminating, and
simulate SIGINT so it can be handled by a signal-handler as usual.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure SIG_DFL for SIGALRM exits with 128 + SIGALRM so other
processes can diagnose why it exits.
While we're at it, make sure we only write to stderr if it's a
terminal, and change the output to match that of Linux.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finishing touch to allow the new advice message squelched
with an advice.* configuration variable.
* mm/status-push-pull-advise:
status: respect advice.statusHints for ahead/behind advice
If the user has unset advice.statusHints, we already
suppress the "use git reset to..." hints in each stanza. The
new "use git push to publish..." hint is the same type of
hint. Let's respect statusHints for it, rather than making
the user set yet another advice flag.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We block SIGINT and SIGQUIT while the editor runs so that
git is not killed accidentally by a stray "^C" meant for the
editor or its subprocesses. This works because most editors
ignore SIGINT.
However, some editor wrappers, like emacsclient, expect to
die due to ^C. We detect the signal death in the editor and
properly exit, but not before writing a useless error
message to stderr. Instead, let's notice when the editor was
killed by a terminal signal and just raise the signal on
ourselves. This skips the message and looks to our parent
like we received SIGINT ourselves.
The end effect is that if the user's editor ignores SIGINT,
we will, too. And if it does not, then we will behave as if
we did not ignore it. That should make all users happy.
Note that in the off chance that another part of git has
ignored SIGINT while calling launch_editor, we will still
properly detect and propagate the failed return code from
the editor (i.e., the worst case is that we generate the
useless error, not fail to notice the editor's death).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SIGINT and SIGQUIT are not generally interesting signals to
the user, since they are typically caused by them hitting "^C"
or otherwise telling their terminal to send the signal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user's editor likely catches SIGINT (ctrl-C). but if
the user spawns a command from the editor and uses ctrl-C to
kill that command, the SIGINT will likely also kill git
itself (depending on the editor, this can leave the terminal
in an unusable state).
Let's ignore it while the editor is running, and do the same
for SIGQUIT, which many editors also ignore. This matches
the behavior if we were to use system(3) instead of
run-command.
Signed-off-by: Paul Fox <pgf@foxharp.boston.ma.us>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The launch_editor function uses the convenient run_command_*
interface. Let's use the more flexible start_command and
finish_command functions, which will let us manipulate the
parent state while we're waiting for the child to finish.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not actually use this parameter; instead we complain
from the child itself (for fork/exec) or from start_command
(if we are using spawn on Windows).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Enclose tests in single quotes as opposed to double quotes. This is
the prevalent style in other tests.
- Remove the unused variable $head4_full.
- Indent the expected output so that it lines up with the rest of the
test text.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of "cd there and then come back", use the "cd there in a
subshell" pattern. Also fix '&&' chaining in one place.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git rev-list --max-count=1 HEAD` is a roundabout way of saying `git
rev-parse --verify HEAD`; replace a bunch of instances of the former
with the latter. Also, don't unnecessarily `cut -c1-7` the rev-parse
output when the `--short` option is available.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --stat" miscounted the total number of changed lines when
binary files were involved and hidden beyond --stat-count. It also
miscounted the total number of changed files when there were
unmerged paths.
* lt/diff-stat-show-0-lines:
t4049: refocus tests
diff --shortstat: do not count "unmerged" entries
diff --stat: do not count "unmerged" entries
diff --stat: move the "total count" logic to the last loop
diff --stat: use "file" temporary variable to refer to data->files[i]
diff --stat: status of unmodified pair in diff-q is not zero
test: add failing tests for "diff --stat" to t4049
New remote helper for hg.
* fc/remote-hg: (22 commits)
remote-hg: fix for older versions of python
remote-hg: fix for files with spaces
remote-hg: avoid bad refs
remote-hg: try the 'tip' if no checkout present
remote-hg: fix compatibility with older versions of hg
remote-hg: add missing config for basic tests
remote-hg: the author email can be null
remote-hg: add option to not track branches
remote-hg: add extra author test
remote-hg: add tests to compare with hg-git
remote-hg: add bidirectional tests
test-lib: avoid full path to store test results
remote-hg: add basic tests
remote-hg: fake bookmark when there's none
remote-hg: add compat for hg-git author fixes
remote-hg: add support for hg-git compat mode
remote-hg: match hg merge behavior
remote-hg: make sure the encoding is correct
remote-hg: add support to push URLs
remote-hg: add support for remote pushing
...
* km/send-email-remove-cruft-in-address:
git-send-email: allow edit invalid email address
git-send-email: ask what to do with an invalid email address
git-send-email: remove invalid addresses earlier
git-send-email: fix fallback code in extract_valid_address()
git-send-email: remove garbage after email address
General clean-ups in various areas, originally written to support a
patch that later turned out to be unneeded.
* jk/send-email-sender-prompt:
t9001: check send-email behavior with implicit sender
t: add tests for "git var"
ident: keep separate "explicit" flags for author and committer
ident: make user_ident_explicitly_given static
t7502: factor out autoident prerequisite
test-lib: allow negation of prerequisites
