Paint the marker for normal state in green and detached state
in red, instead of the other way around.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check to compat
Commit b2f5e268 (Windows: Work around an oddity when a pipe with no reader
is written to) introduced a check for EINVAL after fflush() to fight
spurious "Invalid argument" errors on Windows when a pipe was broken. But
this check may hide real errors on systems that do not have the this odd
behavior. Introduce an fflush wrapper in compat/mingw.* so that the treatment
is only applied on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CVS patchsets are imported with timestamps having an offset of +0000
(UTC). The cvs-authors file is already used to translate the CVS
username to full name and email in the corresponding commit. Extend
this file to support an optional timezone for calculating a user-
specific timestamp offset.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Standard "cvs add" never does any recursion. With standard
cvs, "cvs add dir" will either add just the "dir" to
the repository, or error out. Prior to this change, git-cvsserver
would try to recurse (perhaps re-adding sandbox-removed files?) into
the existing directory instead.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep track of the whole CVS revision number in-process. This will
clarify code when we start handling non-linear revision numbers later.
There is one externally visible change: conflict markers after
an update will now include the full CVS revision number,
including the "1." prefix. It used to leave off the prefix.
Other than the conflict marker, this change doesn't effect
external functionality. No new features, and the DB schema
is unchanged such that it continues to store just
the stripped rev numbers (without prefix).
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Comment that it should not be considered a complete list.
- #'annotate' comment - Uncommented annotate line is 2 lines earlier.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove:
- _headrev() - It uses similar functionality from getmeta() and gethead().
- gethistory() - It uses similar functions gethistorydense() and getlog().
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of a comment, we should really add test cases and actually fix it.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No functionality changes, but these comments should make it easier to
understand how it works.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1Or-k was a vestige from an early, never-released
attempt to handle some oddball cases of CRLF conversion (-k option).
Ultimately it wasn't needed, and I should have gotten rid of it
before submitting the CRLF patch in the first place.
See also 90948a4289 (add ability to guess -kb from contents).
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'cvs log' output is arguably deficient in a number of ways
(see the comment added with the test), but add a test for
the current output to detect for accidental regressions.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were not originally meant for asciidoc, but they are already
so close. Mark them up in asciidoc.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main point is to match the colors to be more close to the color
output of "git status -sb".
- the branchname is green, or in red when the HEAD is detached;
- the flags are either red or green for unstaged/staged and the
remaining flags get a different color or none at all.
Signed-off-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were used to keep track of the last commit a release notes
entry was written for, and should have been removed when cutting
the final release.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes a regression in maint-1.7.11 (v1.7.11.7), maint (v1.7.12.1)
and master (v1.8.0-rc0).
* jk/maint-http-half-auth-push:
http: fix segfault in handle_curl_result
When delete_ref is called on a symref then it locks its target and then
either deletes the target or the symref, depending on whether the flag
REF_NODEREF was set in the parameter delopt.
Instead, simply pass the flag to lock_ref_sha1_basic, which will then
either lock the target or the symref, and delete the locked ref.
This reimplements part of eca35a25 (Fix git branch -m for symrefs.).
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
.gitattributes and .gitignore share the same pattern syntax but has
separate matching implementation. Over the years, ignore's
implementation accumulates more optimizations while attr's stays the
same.
This patch reuses the core matching functions that are also used by
excluded_from_list. excluded_from_list and path_matches can't be
merged due to differences in exclude and attr, for example:
* "!pattern" syntax is forbidden in .gitattributes. As an attribute
can be unset (i.e. set to a special value "false") or made back to
unspecified (i.e. not even set to "false"), "!pattern attr" is unclear
which one it means.
* we support attaching attributes to directories, but git-core
internally does not currently make use of attributes on
directories.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function can later be reused by attr.c. Also turn to_exclude
field into a flag.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "namelen" becomes zero at this stage, we have matched the fixed
part, but whether it actually matches the pattern still depends on the
pattern in "exclude". As demonstrated in t3001, path "three/a.3"
exists and it matches the "three/a.3" part in pattern "three/a.3[abc]",
but that does not mean a true match.
Don't be too optimistic and let fnmatch() do the job.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This block of code deals with the "basename" part only, which has the
length of "pathlen - (basename - pathname)". Stricten the length check
and remove "pathname" from the main expression to avoid confusion.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is convenience in warning and moving on when somebody has a
bogus permissions on /etc/gitconfig and cannot do anything about it.
But the cost in predictability and security is too high --- when
unreadable config files are skipped, it means an I/O error or
permissions problem causes important configuration to be bypassed.
For example, servers may depend on /etc/gitconfig to enforce security
policy (setting transfer.fsckObjects or receive.deny*). Best to
always error out when encountering trouble accessing a config file.
This may add inconvenience in some cases:
1. You are inspecting somebody else's repo, and you do not have
access to their .git/config file. Git typically dies in this
case already since we cannot read core.repositoryFormatVersion,
so the change should not be too noticeable.
2. You have used "sudo -u" or a similar tool to switch uid, and your
environment still points Git at your original user's global
config, which is not readable. In this case people really would
be inconvenienced (they would rather see the harmless warning and
continue the operation) but they can work around it by setting
HOME appropriately after switching uids.
3. You do not have access to /etc/gitconfig due to a broken setup.
In this case, erroring out is a good way to put pressure on the
sysadmin to fix the setup. While they wait for a reply, users
can set GIT_CONFIG_NOSYSTEM to true to keep Git working without
complaint.
After this patch, errors accessing the repository-local and systemwide
config files and files requested in include directives cause Git to
exit, just like errors accessing ~/.gitconfig.
Explained-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a multiuser system where mortals do not have write access to /etc,
the GIT_CONFIG_NOSYSTEM variable is the best tool we have to keep
getting work done when a syntax error or other problem renders
/etc/gitconfig buggy, until the sysadmin sorts the problem out.
Noticed while experimenting with teaching git to error out when
/etc/gitconfig is unreadable.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git reads multiple configuration files: settings come first from the
system config file (typically /etc/gitconfig), then the xdg config
file (typically ~/.config/git/config), then the user's dotfile
(~/.gitconfig), then the repository configuration (.git/config).
Git has always used access(2) to decide whether to use each file; as
an unfortunate side effect, that means that if one of these files is
unreadable (e.g., EPERM or EIO), git skips it. So if I use
~/.gitconfig to override some settings but make a mistake and give it
the wrong permissions then I am subject to the settings the sysadmin
chose for /etc/gitconfig.
Better to error out and ask the user to correct the problem.
This only affects the user and xdg config files, since the user
presumably has enough access to fix their permissions. If the system
config file is unreadable, the best we can do is to warn about it so
the user knows to notify someone and get on with work in the meantime.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The access_or_warn() function is used to check for optional
configuration files like .gitconfig and .gitignore and warn when they
are not accessible due to a configuration issue (e.g., bad
permissions). It is not supposed to complain when a file is simply
missing.
Noticed on a system where ~/.config/git was a file --- when the new
XDG_CONFIG_HOME support looks for ~/.config/git/config it should
ignore ~/.config/git instead of printing irritating warnings:
$ git status -s
warning: unable to access '/home/jrn/.config/git/config': Not a directory
warning: unable to access '/home/jrn/.config/git/config': Not a directory
warning: unable to access '/home/jrn/.config/git/config': Not a directory
warning: unable to access '/home/jrn/.config/git/config': Not a directory
Compare v1.7.12.1~2^2 (attr:failure to open a .gitattributes file
is OK with ENOTDIR, 2012-09-13).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
5166714 (apply: Allow blank context lines to match beyond EOF,
2010-03-06) and then later 0c3ef98 (apply: Allow blank *trailing*
context lines to match beyond EOF, 2010-04-08) taught "git apply"
to trim new blank lines at the end in the patch text when matching
the contents being patched and the preimage recorded in the patch,
under --whitespace=fix mode.
When a preimage is modified to match the current contents in
preparation for such a "fixed" patch application, the context lines
in the postimage must be updated to match (otherwise, it would
reintroduce whitespace breakages), and update_pre_post_images()
function is responsible for doing this. However, this function was
not updated to take into account a case where the removal of
trailing blank lines reduces the number of lines in the preimage,
and triggered an assertion error.
The logic to fix the postimage by copying the corrected context
lines from the preimage was not prepared to handle this case,
either, but it was protected by the assert() and only got exposed
when the assertion is corrected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we get an http 401, we prompt for credentials and put
them in our global credential struct. We also feed them to
the curl handle that produced the 401, with the intent that
they will be used on a retry.
When the code was originally introduced in commit 42653c0,
this was a necessary step. However, since dfa1725, we always
feed our global credential into every curl handle when we
initialize the slot with get_active_slot. So every further
request already feeds the credential to curl.
Moreover, accessing the slot here is somewhat dubious. After
the slot has produced a response, we don't actually control
it any more. If we are using curl_multi, it may even have
been re-initialized to handle a different request.
It just so happens that we will reuse the curl handle within
the slot in such a case, and that because we only keep one
global credential, it will be the one we want. So the
current code is not buggy, but it is misleading.
By cleaning it up, we can remove the slot argument entirely
from handle_curl_result, making it much more obvious that
slots should not be accessed after they are marked as
finished.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b81401c (http: prompt for credentials on failed POST)
taught post_rpc to call run_slot in a loop in order to retry
a request after asking the user for credentials. However,
after a call to run_slot we will have called
finish_active_slot. This means we have released the slot,
and we should no longer look at it.
As it happens, this does not cause any bugs in the current
code, since we know that we are not using curl_multi in this
code path, and therefore nobody will have taken over our
slot in the meantime. However, it is good form to actually
call get_active_slot again. It also future proofs us against
changes in the http code.
We can do this by jumping back to a retry label at the top
of our function. We just need to reorder a few setup lines
that should not be repeated; everything else within the loop
is either idempotent, needs to be repeated, or in a path we
do not follow (e.g., we do not even try when large_request
is set, because we don't know how much data we might have
streamed from our helper program).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we create an http active_request_slot, we can set its
"results" pointer back to local storage. The http code will
fill in the details of how the request went, and we can
access those details even after the slot has been cleaned
up.
Commit 8809703 (http: factor out http error code handling)
switched us from accessing our local results struct directly
to accessing it via the "results" pointer of the slot. That
means we're accessing the slot after it has been marked as
finished, defeating the whole purpose of keeping the results
storage separate.
Most of the time this doesn't matter, as finishing the slot
does not actually clean up the pointer. However, when using
curl's multi interface with the dumb-http revision walker,
we might actually start a new request before handing control
back to the original caller. In that case, we may reuse the
slot, zeroing its results pointer, and leading the original
caller to segfault while looking for its results inside the
slot.
Instead, we need to pass a pointer to our local results
storage to the handle_curl_result function, rather than
relying on the pointer in the slot struct. This matches what
the original code did before the refactoring (which did not
use a separate function, and therefore just accessed the
results struct directly).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb's feeds sometimes contained committer timestamps in the wrong timezone
due to a misspelling.
Signed-off-by: Dylan Simon <dylan@dylex.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep searches for .gitattributes using "name" field in struct
grep_source but that field is not real on-disk path name. For example,
"grep pattern rev" fills the field with "rev:path", and Git looks for
.gitattributes in the (non-existent but exploitable) path "rev:path"
instead of "path".
This patch passes real paths down to grep_source_load_driver() when:
- grep on work tree
- grep on the index
- grep a commit (or a tag if it points to a commit)
so that these cases look up .gitattributes at proper paths.
.gitattributes lookup is disabled in all other cases.
Initial-work-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
