Created t/perf/p0004-lazy-init-name-hash.sh test
to demonstrate correctness and performance gains
with the multithreaded version of lazy_init_name_hash().
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add t/helper/test-lazy-init-name-hash.c test code
to demonstrate performance times for lazy_init_name_hash()
using the original single-threaded and the new multi-threaded
code paths.
Includes a --dump option to dump the created hashmaps to
stdout. You can use this to run both code paths and
confirm that they generate the same hashmaps.
Includes a --analyze option to analyze performance of both
code paths over a range of index sizes to help you find a
lower bound for the LAZY_THREAD_COST in name-hash.c.
For example, passing "-a 4000" will set "istate.cache_nr"
to 4000 and then try the multi-threaded code -- probably
giving 2 threads with 2000 entries each. It will then
run both the single-threaded (1x4000) and the multi-threaded
(2x2000) and compare the times. It will then repeat the
test with 8000, 12000, and etc. so that you can see the
cross over.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jan Palus noticed that some here-doc are spelled incorrectly,
resulting the entire remainder of the test snippet being slurped
into the "expect" file as if it were data, e.g. in this sequence
cat >expect <<EOF &&
... expectation ...
EOF
git $cmd_being_tested >actual &&
test_cmp expect actual
the last command of the test is "cat" that sends everything to
'expect' and succeeds.
Fixing these issues in t7004 and t7030 reveals that "git tag -v"
and "git verify-tag" with their --format option do not work as the
test was expecting originally. Instead of showing both valid tags
and tags with incorrect signatures on their output, tags that do not
pass verification are omitted from the output. Another breakage that
is uncovered is that these tests must be restricted to environment
where gpg is available.
Arguably, that is a safer behaviour, and because the format
specifiers like %(tag) do not have a way to show if the signature
verifies correctly, the command with the --format option cannot be
used to get a list of tags annotated with their signature validity
anyway.
For now, let's fix the here-doc syntax, update the expectation to
match the reality, and update the test prerequisite.
Maybe later when we extend the --format language available to "git
tag -v" and "git verify-tag" to include things like "%(gpg:status)",
we may want to change the behaviour so that piping a list of tag
names into
xargs git verify-tag --format='%(gpg:status) %(tag)'
becomes a good way to produce such a list, but that is a separate
topic.
Noticed-by: Jan Palus <jan.palus@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Santiago Torres <santiago@nyu.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We found a few run-away here documents that are started with an
end-of-here-doc marker that is incorrectly spelled, e.g.
git some command >actual &&
cat <<EOF >expect
...
EOF &&
test_cmp expect actual
which ends up slurping the entire remainder of the script as if it
were the data. Often the command that gets misused like this exits
without failure (e.g. "cat" in the above example), which makes the
command appear to work, without ever executing the remainder of the
test.
Piggy-back on the test that catches &&-chain breakage to detect this
case as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__gitcomp_nl() iterates over all the possible completion words it gets
as argument
- filtering matching words,
- appending a trailing space to each matching word (in all but two
cases),
- prepending a prefix to each matching word (when completing words
after e.g. '--option=<TAB>' or 'master..<TAB>'), and
- adding each matching word to the COMPREPLY array.
This takes a while when a lot of refs are passed to __gitcomp_nl().
The previous changes in this series ensure that __git_refs() lists
only refs matching the current word to be completed, making a second
filtering in __gitcomp_nl() redundant.
Adding the necessary prefix and suffix could be done in __git_refs()
as well:
- When refs come from 'git for-each-ref', then that prefix and
suffix could be added much more efficiently using a 'git
for-each-ref' format containing said prefix and suffix. Care
should be taken, though, because that prefix might contain
'for-each-ref' format specifiers as part of the left hand side of
a '..' range or '...' symmetric difference notation or
fetch/push/etc. refspec, e.g. 'git log "evil-%(refname)..br<TAB>'.
Doubling every '%' in the prefix will prevent 'git for-each-ref'
from interpolating any of those contained specifiers.
- When refs come from 'git ls-remote', then that prefix and suffix
can be added in the shell loop that has to process 'git
ls-remote's output anyway.
- Finally, the prefix and suffix can be added to that handful of
potentially matching symbolic and pseudo refs right away in the
shell loop listing them.
And then all what is still left to do is to assign a bunch of
newline-separated words to a shell array, which can be done without a
shell loop iterating over each word, basically making all of
__gitcomp_nl() unnecessary for refs completion.
Add the helper function __gitcomp_direct() to fill the COMPREPLY array
with prefiltered and preprocessed words without any additional
processing, without a shell loop, with just one single compound
assignment. Modify __git_refs() to accept prefix and suffix
parameters and add them to each and every listed ref as described
above. Modify __git_complete_refs() to pass the prefix and suffix
parameters to __git_refs() and to feed __git_refs()'s output to
__gitcomp_direct() instead of __gitcomp_nl().
This speeds up refs completion when there are a lot of refs matching
the current word to be completed. Listing all branches for completion
in a repo with 100k local branches, all packed, best of five:
On Linux, near the beginning of this series, for reference:
$ time __git_complete_refs
real 0m2.028s
user 0m1.692s
sys 0m0.344s
Before this patch:
real 0m1.135s
user 0m1.112s
sys 0m0.024s
After:
real 0m0.367s
user 0m0.352s
sys 0m0.020s
On Windows, near the beginning:
real 0m13.078s
user 0m1.609s
sys 0m0.060s
Before this patch:
real 0m2.093s
user 0m1.641s
sys 0m0.060s
After:
real 0m0.683s
user 0m0.203s
sys 0m0.076s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When completing refs, several __git_refs() code paths list all the
refs from the refs/{heads,tags,remotes}/ hierarchy and then
__gitcomp_nl() iterates over those refs in a shell loop to filter out
refs not matching the current ref to be completed. This comes with a
considerable performance penalty when a repository contains a lot of
refs but the current ref can be uniquely completed or when only a
handful of refs match the current ref.
Reduce the number of iterations in __gitcomp_nl() from the number of
refs to the number of matching refs by specifying appropriate globbing
patterns to 'git for-each-ref' and 'git ls-remote' to list only those
refs that match the current ref to be completed. However, do so only
when the ref to match is explicitly given as parameter, because the
current word on the command line might contain a prefix like
'--option=' or 'branch..'. The __git_complete_refs() and
__git_complete_fetch_refspecs() helpers introduced previously in this
patch series already call __git_refs() specifying this current ref
parameter, so all their callsites, i.e. all places in the completion
script doing refs completion, can benefit from this optimization.
Furthermore, list only those symbolic and pseudo refs that match the
current ref to be completed. Though it doesn't matter at all in
itself performance-wise, it will allow us further significant
optimizations later in this series.
This speeds up refs completion considerably when there are a lot of
non-matching refs to be filtered out. Uniquely completing a branch in
a repository with 100k local branches, all packed, best of five:
On Linux, before:
$ time __git_complete_refs --cur=maste
real 0m0.831s
user 0m0.808s
sys 0m0.028s
After:
real 0m0.119s
user 0m0.104s
sys 0m0.008s
On Windows, before:
real 0m1.480s
user 0m1.031s
sys 0m0.060s
After:
real 0m0.377s
user 0m0.015s
sys 0m0.030s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 49416ad22 (completion: support excluding refs, 2016-08-24) made
possible to complete short refs with a '^' prefix.
Extend the support to full refs to make completing '^refs/...' work.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After 'git fetch <remote> <TAB>' our completion script offers refspecs
that will fetch to a local branch with the same name as in the remote
repository, e.g. 'master:master'. This also completes
non-fast-forward refspecs, i.e. after a '+' prefix like
'+master:master', and fully qualified refspecs, e.g.
'refs/heads/master:refs/heads/master'. However, it does not complete
non-fast-forward fully qualified refspecs (or fully qualified refspecs
following any other prefix, e.g. '--option=', though currently no git
command supports such an option, but third party git commands might).
These refspecs are listed by the __git_refs2() function, which is just
a thin wrapper iterating over __git_refs()'s output, turning each
listed ref into a refspec. Now, it's certainly possible to modify
__git_refs2() and its callsite to pass an extra parameter containing
only the ref part of the current word to be completed (to follow suit
of the previous commit) to deal with prefixed fully qualified refspecs
as well. Unfortunately, keeping the current behavior unchanged in the
"no extra parameter" case brings in a bit of subtlety, which makes the
resulting code ugly and compelled me to write a 8-line long comment in
the proof of concept. Not good. However, since the callsite has to
be modified for proper functioning anyway, we might as well leave
__git_refs2() as is and introduce a new helper function without
backwards compatibility concerns.
Add the new function __git_complete_fetch_refspecs() that has all the
necessary parameters to do the right thing in all cases mentioned
above, including non-fast-forward fully qualified refspecs. This new
function can also easier benefit from optimizations coming later in
this patch series.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Completing full refs currently only works when the full ref stands on
in its own on the command line, but doesn't work when the current word
to be completed contains a prefix before the full ref, e.g.
'--option=refs/<TAB>' or 'master..refs/bis<TAB>'.
The reason is that __git_refs() looks at the current word to be
completed ($cur) as a whole to decide whether it has to list full (if
it starts with 'refs/') or short refs (otherwise). However, $cur also
holds said '--option=' or 'master..' prefixes, which of course throw
off this decision. Luckily, the default action is to list short refs,
that's why completing short refs happens to work even after a
'master..<TAB>' prefix and similar cases.
Pass only the ref part of the current word to be completed to
__git_refs() as a new positional parameter, so it can make the right
decision even if the whole current word contains some kind of a
prefix.
Make this new parameter the 4. positional parameter and leave the 3.
as an ignored placeholder for now (it will be used later in this patch
series).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_refs() currently accepts two optional positional parameters: a
remote and a flag for 'git checkout's tracking DWIMery. To fix a
minor bug, and, more importantly, for faster refs completion, this
series will add three more parameters: a prefix, the current word to
be completed and a suffix, i.e. the options accepted by __gitcomp() &
friends, and will change __git_refs() to list only refs matching that
given current word and to add that given prefix and suffix to the
listed refs.
However, __git_refs() is the helper function that is most likely used
in users' custom completion scriptlets for their own git commands, and
we don't want to break those, so
- we can't change __git_refs()'s default output format, i.e. we
can't by default append a trailing space to every listed ref,
meaning that the suffix parameter containing the default trailing
space would have to be specified on every invocation, and
- we can't change the position of existing positional parameters
either, so there would have to be plenty of set-but-empty
placeholder positional parameters all over the completion script.
Furthermore, with five positional parameters it would be really hard
to remember which position means what.
To keep callsites simple, add the new wrapper function
__git_complete_refs() around __git_refs(), which:
- instead of positional parameters accepts real '--opt=val'-style
options and with minimalistic option parsing translates them to
__git_refs()'s and __gitcomp_nl()'s positional parameters, and
- includes the '__gitcomp_nl "$(__git_refs ...)" ...' command
substitution to make its behavior match its name and the behavior
of other __git_complete_* functions, and to limit future changes
in this series to __git_refs() and this new wrapper function.
Call this wrapper function instead of __git_refs() wherever possible
throughout the completion script, i.e. when __git_refs()'s output is
fed to __gitcomp_nl() right away without further processing, which
means all callsites except a single one in the __git_refs2() helper.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "suceed" to "succeed" in a test description. The typo has been
here since the code was originally added in commit ef5a6fb597 ("Add
test-script for git-tag", 2007-06-28).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test for "git tag -l" to not have an associated TODO
comment saying that it should return non-zero if there's no tags.
This was added in commit ef5a6fb597 ("Add test-script for git-tag",
2007-06-28) when the tests for "tag" were initially added, but at this
point changing this would be inconsistent with how "git tag" is a
synonym for "git tag -l", and would needlessly break external code
that relies on this porcelain command.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the tag test suite to test for --contains on a tree & blob. It
only accepts commits and will spew out "<object> is a tree, not a
commit".
It's sufficient to test this just for the "tag" and "branch" commands,
because it covers all the machinery shared between "branch" and
"for-each-ref".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach remote-curl to understand push options and to be able to convey
them across HTTP.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three issues with the test:
* The syntax of the here-doc was wrong, such that the entire test was
sucked into the here-doc, which is why the test succeeded.
* The variable $submodulesha1 was not expanded as it was inside a quoted
here text. We do not want to quote EOF marker for this.
* The redirection from the git command to the output file for comparison
was wrong as the -C operator from git doesn't apply to the redirect path.
Also we're interested in stderr of that command.
Noticed-by: Jan Palus <jan.palus@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the mention of "Inside the <script> part, the standard
output..." to use the definite article, which makes more sense in this
context.
This changes documentation I originally added back in commit
20873f45e7 ("t/README: Document the do's and don'ts of tests",
2010-07-02).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a link to the web version of the TAP::Parser::Grammar
documentation to link to metacpan.org instead of search.cpan.org.
This is something I added back in commit 20873f45e7 ("t/README:
Document the do's and don'ts of tests", 2010-07-02), at the time
search.cpan.org was the more actively maintained CPAN web-interface,
nowadays that's metacpan.org.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when there are untracked changes in a file "one" and in a file
"two" in the repository and the user uses:
git stash push -k one
all changes in "two" are wiped out completely. That is clearly not the
intended result. Make sure that only the files given in the pathspec
are changed when git stash push -k <pathspec> is used.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For "git stash -p --no-keep-index", the pathspec argument is currently
not passed to "git reset". This means that changes that are staged but
that are excluded from the pathspec still get unstaged by git stash -p.
Make sure that doesn't happen by passing the pathspec argument to the
git reset in question, bringing the behaviour in line with "git stash --
<pathspec>".
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git stash push uses other git commands internally. Currently it only
passes the -q flag to those if the -q flag is passed to git stash. when
using 'git stash push -p -q --no-keep-index', it doesn't even pass the
flag on to the internal reset at all.
It really is enough for the user to know that the stash is created,
without bothering them with the internal details of what's happening.
Always pass the -q flag to the internal git clean and git reset
commands, to avoid unnecessary and potentially confusing output.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This came as part of jk/quote-env-path-list-component and was merged
to 2.11.1 and later.
Noticed-by: Jan Palus <jan.palus@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `reword` command of an interactive rebase used to call the
commit-msg hooks, but that regressed when we switched to the
rebase--helper backed by the sequencer.
Noticed by Sebastian Schuberth.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-describe tells you the version number you're at, or errors out, e.g.
when you run it outside of a repository, which may happen when downloading
a tar ball instead of using git to obtain the source code.
To keep this property of only erroring out, when not in a repository,
severe (submodule) errors must be downgraded to reporting them gently
instead of having git-describe error out completely.
To achieve that a flag '--broken' is introduced, which is in the same
vein as '--dirty' but uses an actual child process to check for dirtiness.
When that child dies unexpectedly, we'll append '-broken' instead of
'-dirty'.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was an oversight in 55856a35b2 (rm: absorb a submodules git dir
before deletion, 2016-12-27), as the body of the test changed without
adapting the test subject.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration file learned a new "includeIf.<condition>.path"
that includes the contents of the given path only when the
condition holds. This allows you to say "include this work-related
bit only in the repositories under my ~/work/ directory".
* nd/conditional-config-include:
config: add conditional include
config.txt: reflow the second include.path paragraph
config.txt: clarify multiple key values in include.path
"Cc:" on the trailer part does not have to conform to RFC strictly,
unlike in the e-mail header. "git send-email" has been updated to
ignore anything after '>' when picking addresses, to allow non-address
cruft like " # stable 4.4" after the address.
* jh/send-email-one-cc:
send-email: only allow one address per body tag
"git remote rm X", when a branch has remote X configured as the
value of its branch.*.remote, tried to remove branch.*.remote and
branch.*.merge and failed if either is unset.
* rl/remote-allow-missing-branch-name-merge:
remote: ignore failure to remove missing branch.<name>.merge
A "gc.log" file left by a backgrounded "gc --auto" disables further
automatic gc; it has been taught to run at least once a day (by
default) by ignoring a stale "gc.log" file that is too old.
* dt/gc-ignore-old-gc-logs:
gc: ignore old gc.log files
"git diff --quiet" relies on the size field in diff_filespec to be
correctly populated, but diff_populate_filespec() helper function
made an incorrect short-cut when asked only to populate the size
field for paths that need to go through convert_to_git() (e.g. CRLF
conversion).
* jc/diff-populate-filespec-size-only-fix:
diff: do not short-cut CHECK_SIZE_ONLY check in diff_populate_filespec()
Change the behavior of specifying --merged & --no-merged to be an
error, instead of silently picking the option that was provided last.
Subsequent changes of mine add a --no-contains option in addition to
the existing --contains. Providing both of those isn't an error, and
has actual meaning.
Making its cousins have different behavior in this regard would be
confusing to the user, especially since we'd be silently disregarding
some of their command-line input.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hash-object command uses prefix_filename() without
duplicating its return value. Since that function returns a
static buffer, the value is overwritten by subsequent calls.
This can cause incorrect results when we use --path along
with hashing a file by its relative path, both of which need
to call prefix_filename(). We overwrite the filename
computed for --path, effectively ignoring it.
We can fix this by calling xstrdup on the return value. Note
that we don't bother freeing the "vpath" instance, as it
remains valid until the program exit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move cleanup lines that occur after test blocks into
test_when_finished calls within the test bodies. Don't move cleanup
lines that seem to be related to mutiple tests rather than a single
test.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test case redirects stdout and stderr to output files, but,
unlike the other cases of redirection in the t1400 tests, these files
are not examined downstream. Remove the redirection so that the
output is visible when running the tests verbosely.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A group of update-ref tests verifies that logs are created when either
the log file for the ref already exists or core.logAllRefUpdates is
"true". However, when the default for core.logAllRefUpdates was
changed in 0bee59186 (Enable reflogs by default in any repository with
a working directory., 2006-12-14), the setup for the tests was not
updated. As a result, the "logged by touch" tests would pass even if
the log file did not exist (i.e., if "--create-reflog" was removed
from the first "git update-ref" call).
Update the "logged by touch" tests to disable core.logAllRefUpdates
explicitly so that the behavior does not depend on the default value.
While we're here, update the "logged by config" tests to use
test_config() rather than setting core.logAllRefUpdates to "true"
outside of the tests.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few tests share their description with another test. Extend the
descriptions to indicate how the tests differ.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git difftool --dir-diff" used to die a controlled death giving a
"fatal" message when encountering a locally modified symbolic link,
but it started segfaulting since v2.12. This has been fixed.
* js/difftool-builtin:
difftool: handle modified symlinks in dir-diff mode
t7800: cleanup cruft left behind by tests
t7800: remove whitespace before redirect
'git {log,diff,...} -S<...> --pickaxe-regex' can segfault as a result
of out-of-bounds memory reads.
diffcore-pickaxe.c:contains() looks for all matches of the given regex
in a buffer in a loop, advancing the buffer pointer to the end of the
last match in each iteration. When we switched to REG_STARTEND in
b7d36ffca (regex: use regexec_buf(), 2016-09-21), we started passing
the size of that buffer to the regexp engine, too. Unfortunately,
this buffer size is never updated on subsequent iterations, and as the
buffer pointer advances on each iteration, this "bufptr+bufsize"
points past the end of the buffer. This results in segmentation
fault, if that memory can't be accessed. In case of 'git log' it can
also result in erroneously listed commits, if the memory past the end
of buffer is accessible and happens to contain data matching the
regex.
Reduce the buffer size on each iteration as the buffer pointer is
advanced, thus maintaining the correct end of buffer location.
Furthermore, make sure that the buffer pointer is not dereferenced in
the control flow statements when we already reached the end of the
buffer.
The new test is flaky, I've never seen it fail on my Linux box even
without the fix, but this is expected according to db5dfa3 (regex:
-G<pattern> feeds a non NUL-terminated string to regexec() and fails,
2016-09-21). However, it did fail on Travis CI with the first (and
incomplete) version of the fix, and based on that commit message I
would expect the new test without the fix to fail most of the time on
Windows.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the 'test_pause' helper function invokes the shell mid-test, it
explicitly redirects the shell's stdout and stderr to file descriptors
3 and 4, which are the stdout and stderr of the tests (i.e. where they
would be connected anyway without those redirections). These file
descriptors are only attached to the terminal in verbose mode, hence
the restriction of 'test_pause' to work only with '-v'.
Redirect the shell's stdout and stderr to the test environment's
original stdout and stderr, allowing it to work properly even in
non-verbose mode, and the restriction can be lifted.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'debug' test helper is supposed to facilitate debugging by running
a command of the test suite under gdb. Unfortunately, its usefulness
is severely limited, because that gdb session is not interactive,
since the test's, and thus gdb's standard input is redirected from
/dev/null (for a good reason, see 781f76b15 (test-lib: redirect stdin
of tests, 2011-12-15)).
Redirect gdb's standard file descriptors from/to the test
environment's stdin, stdout and stderr in the 'debug' helper, thus
creating an interactive gdb session (even in non-verbose mode), which
is much, much more useful.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to adding submodule.<name>.url to the config, set
submodule.<name>.active to true unless submodule.active is configured
and the submodule's path matches the configured pathspec.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When initializing a submodule set the submodule.<name>.active config to
true if the module hasn't already been configured to be active by some
other means (e.g. a pathspec set in submodule.active).
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach clone --recurse-submodules to optionally take a pathspec argument
which describes which submodules should be recursively initialized and
cloned. If no pathspec is provided, --recurse-submodules will
recursively initialize and clone all submodules by using a default
pathspec of ".". In order to construct more complex pathspecs,
--recurse-submodules can be given multiple times.
This also configures the 'submodule.active' configuration option to be
the given pathspec, such that any future invocation of `git submodule
update` will keep up with the pathspec.
Additionally the switch '--recurse' is removed from the Documentation as
well as marked hidden in the options array, to streamline the options
for submodules. A simple '--recurse' doesn't convey what is being
recursed, e.g. it could mean directories or trees (c.f. ls-tree) In a
lot of other commands we already have '--recurse-submodules' to mean
recursing into submodules, so advertise this spelling here as the
genuine option.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach `submodule init` to initialize submodules which have been
configured to be active by setting 'submodule.active' with a pathspec.
Now if no path arguments are given and 'submodule.active' is configured,
`init` will initialize all submodules which have been configured to be
active. If no path arguments are given and 'submodule.active' is not
configured, then `init` will retain the old behavior of initializing all
submodules.
This allows users to record more complex patterns as it saves retyping
them whenever you invoke update.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the submodule.<name>.url config option is used to determine if
a given submodule is of interest to the user. This ends up being
cumbersome in a world where we want to have different submodules checked
out in different worktrees or a more generalized mechanism to select
which submodules are of interest.
In a future with worktree support for submodules, there will be multiple
working trees, each of which may only need a subset of the submodules
checked out. The URL (which is where the submodule repository can be
obtained) should not differ between different working trees.
It may also be convenient for users to more easily specify groups of
submodules they are interested in as opposed to running "git submodule
init <path>" on each submodule they want checked out in their working
tree.
To this end two config options are introduced, submodule.active and
submodule.<name>.active. The submodule.active config holds a pathspec
that specifies which submodules should exist in the working tree. The
submodule.<name>.active config is a boolean flag used to indicate if
that particular submodule should exist in the working tree.
Its important to note that submodule.active functions differently than
the other configuration options since it takes a pathspec. This allows
users to adopt at least two new workflows:
1. Submodules can be grouped with a leading directory, such that a
pathspec e.g. 'lib/' would cover all library-ish modules to allow
those who are interested in library-ish modules to set
"submodule.active = lib/" just once to say any and all modules in
'lib/' are interesting.
2. Once the pathspec-attribute feature is invented, users can label
submodules with attributes to group them, so that a broad pathspec
with attribute requirements, e.g. ':(attr:lib)', can be used to say
any and all modules with the 'lib' attribute are interesting.
Since the .gitattributes file, just like the .gitmodules file, is
tracked by the superproject, when a submodule moves in the
superproject tree, the project can adjust which path gets the
attribute in .gitattributes, just like it can adjust which path has
the submodule in .gitmodules.
Neither of these two additional configuration options solve the problem
of wanting different submodules checked out in different worktrees
because multiple worktrees share .git/config. Only once per-worktree
configurations become a reality can this be solved, but this is a
necessary preparatory step for that future.
Given these multiple ways to check if a submodule is of interest, the
more fine-grained submodule.<name>.active option has the highest order
of precedence followed by the pathspec check against submodule.active.
To ensure backwards compatibility, if neither of these options are set,
git falls back to checking the submodule.<name>.url option to determine
if a submodule is interesting.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git revert -m 0 $merge_commit" complained that reverting a merge
needs to say relative to which parent the reversion needs to
happen, as if "-m 0" weren't given. The correct diagnosis is that
"-m 0" does not refer to the first parent ("-m 1" does). This has
been fixed.
* jk/cherry-pick-0-mainline:
cherry-pick: detect bogus arguments to --mainline
The start-up sequence of "git" needs to figure out some configured
settings before it finds and set itself up in the location of the
repository and was quite messy due to its "chicken-and-egg" nature.
The code has been restructured.
* js/early-config:
setup.c: mention unresolved problems
t1309: document cases where we would want early config not to die()
setup_git_directory_gently_1(): avoid die()ing
t1309: test read_early_config()
read_early_config(): really discover .git/
read_early_config(): avoid .git/config hack when unneeded
setup: make read_early_config() reusable
setup: introduce the discover_git_directory() function
setup_git_directory_1(): avoid changing global state
setup: prepare setup_discovered_git_dir() for the root directory
setup_git_directory(): use is_dir_sep() helper
t7006: replace dubious test
"git add -p <pathspec>" unnecessarily expanded the pathspec to a
list of individual files that matches the pathspec by running "git
ls-files <pathspec>", before feeding it to "git diff-index" to see
which paths have changes, because historically the pathspec
language supported by "diff-index" was weaker. These days they are
equivalent and there is no reason to internally expand it. This
helps both performance and avoids command line argument limit on
some platforms.
* jk/add-i-use-pathspecs:
add--interactive: do not expand pathspecs with ls-files
The pathspec mechanism learned to further limit the paths that
match the pattern to those that have specified attributes attached
via the gitattributes mechanism.
* bw/attr-pathspec:
pathspec: allow escaped query values
pathspec: allow querying for attributes
From a working tree of a repository, a new option of "rev-parse"
lets you ask if the repository is used as a submodule of another
project, and where the root level of the working tree of that
project (i.e. your superproject) is.
* sb/rev-parse-show-superproject-root:
rev-parse: add --show-superproject-working-tree
Picking two versions of Git and running tests to make sure the
older one and the newer one interoperate happily has now become
possible.
* jk/interop-test:
t/interop: add test of old clients against modern git-daemon
t: add an interoperability test harness
The experimental "split index" feature has gained a few
configuration variables to make it easier to use.
* cc/split-index-config: (22 commits)
Documentation/git-update-index: explain splitIndex.*
Documentation/config: add splitIndex.sharedIndexExpire
read-cache: use freshen_shared_index() in read_index_from()
read-cache: refactor read_index_from()
t1700: test shared index file expiration
read-cache: unlink old sharedindex files
config: add git_config_get_expiry() from gc.c
read-cache: touch shared index files when used
sha1_file: make check_and_freshen_file() non static
Documentation/config: add splitIndex.maxPercentChange
t1700: add tests for splitIndex.maxPercentChange
read-cache: regenerate shared index if necessary
config: add git_config_get_max_percent_split_change()
Documentation/git-update-index: talk about core.splitIndex config var
Documentation/config: add information for core.splitIndex
t1700: add tests for core.splitIndex
update-index: warn in case of split-index incoherency
read-cache: add and then use tweak_split_index()
split-index: add {add,remove}_split_index() functions
config: add git_config_get_split_index()
...
When using the --recurse-submodules flag with a relative pathspec which
includes "..", an error is produced inside the child process spawned for a
submodule. When creating the pathspec struct in the child, the ".." is
interpreted to mean "go up a directory" which causes an error stating that the
path ".." is outside of the repository.
While it is true that ".." is outside the scope of the submodule, it is
confusing to a user who originally invoked the command where ".." was indeed
still inside the scope of the superproject. Since the child process launched
for the submodule has some context that it is operating underneath a
superproject, this error could be avoided.
This patch fixes the bug by passing the 'prefix' to the child process. Now
each child process that works on a submodule has two points of reference to the
superproject: (1) the 'super_prefix' which is the path from the root of the
superproject down to root of the submodule and (2) the 'prefix' which is the
path from the root of the superproject down to the directory where the user
invoked the git command.
With these two pieces of information a child process can correctly interpret
the pathspecs provided by the user as well as being able to properly format its
output relative to the directory the user invoked the original command from.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the --recurse-submodules flag with a relative pathspec which
includes "..", an error is produced inside the child process spawned for
a submodule. When creating the pathspec struct in the child, the ".."
is interpreted to mean "go up a directory" which causes an error stating
that the path ".." is outside of the repository.
While it is true that ".." is outside the scope of the submodule, it is
confusing to a user who originally invoked the command where ".." was
indeed still inside the scope of the superproject. Since the child
process launched for the submodule has some context that it is operating
underneath a superproject, this error could be avoided.
This patch fixes the bug by passing the 'prefix' to the child process.
Now each child process that works on a submodule has two points of
reference to the superproject: (1) the 'super_prefix' which is the path
from the root of the superproject down to root of the submodule and (2)
the 'prefix' which is the path from the root of the superproject down to
the directory where the user invoked the git command.
With these two pieces of information a child process can correctly
interpret the pathspecs provided by the user as well as being able to
properly format its output relative to the directory the user invoked
the original command from.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The definition of which submodules are of interest by the user
is tied to the configuration submodule.<name>.url; when it is
set to a non-empty string, it is of interest. We'd want to be
able to later change this definition, but there are many places
that explicitly check this condition in the scripted Porcelain.
Introduce the "is-active" subcommand to "submodule--helper", so
that the exact definition of what submodule is of interest can
be centrally defined (and changed in later steps). In a few
patches that follow, this helper is used to replace the explicit
checks of the configuration variable in scripts.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't actually have a Git-object collision, so the best
we can do is to run one of the shattered PDFs through
test-sha1. This should trigger the collision check and die.
In a sense this isn't really checking anything that the
upstream sha1collisiondetection project doesn't cover
already. But it at least makes sure that our build correctly
uses the library.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new known failure mode is introduced[1], which is actually not
a failure but a feature in read-tree. Unlike checkout for which
the recursive submodule tests were originally written, read-tree does
warn about ignored untracked files that would be overwritten.
For the sake of keeping the test library for submodules generic, just
mark the test as a failure.
[1] KNOWN_FAILURE_SUBMODULE_OVERWRITE_IGNORED_UNTRACKED
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This exposes a flag to recurse into submodules
in builtin/checkout making use of the code implemented
in prior patches.
A new failure mode is introduced in the submodule
update library, as the directory/submodule conflict
is not solved in prior patches.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git v2.12 was shipped with an embarrassing breakage where various
operations that verify paths given from the user stopped dying when
seeing an issue, and instead later triggering segfault.
... and then to down to 'maint'.
* js/realpath-pathdup-fix:
real_pathdup(): fix callsites that wanted it to die on error
t1501: demonstrate NULL pointer access with invalid GIT_WORK_TREE
The code to parse "git log -L..." command line was buggy when there
are many ranges specified with -L; overrun of the allocated buffer
has been fixed.
* ax/line-log-range-merge-fix:
line-log.c: prevent crash during union of too many ranges
The patch subcommand of "git add -i" was meant to have paths
selection prompt just like other subcommand, unlike "git add -p"
directly jumps to hunk selection. Recently, this was broken and
"add -i" lost the paths selection dialog, but it now has been
fixed.
* jk/add-i-patch-do-prompt:
add--interactive: fix missing file prompt for patch mode with "-i"
Currently lib-submodule-update.sh provides 2 functions
test_submodule_switch and test_submodule_forced_switch that are used by a
variety of tests to ensure that submodules behave as expected. The current
expected behavior is that submodules are not touched at all (see
42639d2317 for the exact setup).
In the future we want to teach all these commands to recurse
into submodules. To do that, we'll add two testing functions to
submodule-update-lib.sh: test_submodule_switch_recursing and
test_submodule_forced_switch_recursing.
These two functions behave in analogy to the already existing functions
just with a different expectation on submodule behavior. The submodule
in the working tree is expected to be updated to the recorded submodule
version. The behavior is analogous to e.g. the behavior of files in a
nested directory in the working tree, where a change to the working tree
handles any arising directory/file conflicts just fine.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cleaning up code by generalising it.
Currently the mailing list discusses yet again how
to migrate away from sha1.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adding the repository itself as a submodule does not make sense in the
real world. In our test suite we used to do that out of convenience in
some tests as the current repository has easiest access for setting up
'just a submodule'.
However this doesn't quite test the real world, so let's do not follow
this pattern any further and actually create an independent repository
that we can use as a submodule.
When using './.' as the remote the superproject and submodule share the
same objects, such that testing if a given sha1 is a valid commit works
in either repository. As running commands in an unpopulated submodule
fall back to the superproject, this happens in `reset_work_tree_to`
to determine if we need to populate the submodule. Fix this bug by
checking in the actual remote now.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Redraw the ASCII art describing the setup using more space, such that
it is easier to understand. The leaf commits are now ordered the same
way the actual code is ordered.
Add empty lines to the setup code separating each of the leaf commits,
each starting with a "checkout -b".
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cherry-pick and revert commands use OPT_INTEGER() to
parse --mainline. The stock parser is smart enough to reject
non-numeric nonsense, but it doesn't know that parent
counting starts at 1.
Worse, the value "0" is indistinguishable from the unset
case, so a user who assumes the counting is 0-based will get
a confusing message:
$ git cherry-pick -m 0 $merge
error: commit ... is a merge but no -m option was given.
Let's use a custom callback that enforces our range.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detect the null object ID for symlinks in dir-diff so that difftool can
detect when symlinks are modified in the worktree.
Previously, a null symlink object ID would crash difftool.
Handle null object IDs as unknown content that must be read from
the worktree.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --list" takes the "--abbrev" and "--no-abbrev" options
to control the output of the object name in its "-v"(erbose)
output, but a recent update started ignoring them; this fixes it
before the breakage reaches to any released version.
* kn/ref-filter-branch-list:
branch: honor --abbrev/--no-abbrev in --list mode
"git filter-branch --prune-empty" drops a single-parent commit that
becomes a no-op, but did not drop a root commit whose tree is empty.
* dp/filter-branch-prune-empty:
p7000: add test for filter-branch with --prune-empty
filter-branch: fix --prune-empty on parentless commits
t7003: ensure --prune-empty removes entire branch when applicable
t7003: ensure --prune-empty can prune root commit
The t/perf performance test suite was not prepared to test not so
old versions of Git, but now it covers versions of Git that are not
so ancient.
* jt/perf-updates:
t/perf: add fallback for pre-bin-wrappers versions of git
t/perf: use $MODERN_GIT for all repo-copying steps
t/perf: export variable used in other blocks
"git fetch" that requests a commit by object name, when the other
side does not allow such an request, failed without much
explanation.
* mm/fetch-show-error-message-on-unadvertised-object:
fetch-pack: add specific error for fetching an unadvertised object
fetch_refs_via_pack: call report_unmatched_refs
fetch-pack: move code to report unmatched refs to a function
"git branch @" created refs/heads/@ as a branch, and in general the
code that handled @{-1} and @{upstream} was a bit too loose in
disambiguating.
* jk/interpret-branch-name:
checkout: restrict @-expansions when finding branch
strbuf_check_ref_format(): expand only local branches
branch: restrict @-expansions when deleting
t3204: test git-branch @-expansion corner cases
interpret_branch_name: allow callers to restrict expansions
strbuf_branchname: add docstring
strbuf_branchname: drop return value
interpret_branch_name: move docstring to header file
interpret_branch_name(): handle auto-namelen for @{-1}
A few tests were run conditionally under (rare) conditions where
they cannot be run (like running cvs tests under 'root' account).
* ab/cond-skip-tests:
gitweb tests: skip tests when we don't have Time::HiRes
gitweb tests: change confusing "skip_all" phrasing
cvs tests: skip tests that call "cvs commit" when running as root
Jeff King came up with a couple examples that demonstrate how the new
read_early_config() that looks harder for the current .git/ directory
could die() in an undesirable way.
Let's add those cases to the test script, to document what we would like
to happen when early config encounters problems.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far, we had no explicit tests of that function.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, we punted and simply assumed that we are in the top-level
directory of the project, and that there is no .git file but a .git/
directory so that we can read directly from .git/config.
However, that is not necessarily true. We may be in a subdirectory. Or
.git may be a gitfile. Or the environment variable GIT_DIR may be set.
To remedy this situation, we just refactored the way
setup_git_directory() discovers the .git/ directory, to make it
reusable, and more importantly, to leave all global variables and the
current working directory alone.
Let's discover the .git/ directory correctly in read_early_config() by
using that new function.
This fixes 4 known breakages in t7006.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we want to get the list of modified files, we first
expand any user-provided pathspecs with "ls-files", and then
feed the resulting list of paths as arguments to
"diff-index" and "diff-files". If your pathspec expands into
a large number of paths, you may run into one of two
problems:
1. The OS may complain about the size of the argument
list, and refuse to run. For example:
$ (ulimit -s 128 && git add -p drivers)
Can't exec "git": Argument list too long at .../git-add--interactive line 177.
Died at .../git-add--interactive line 177.
That's on the linux.git repository, which has about 20K
files in the "drivers" directory (none of them modified
in this case). The "ulimit -s" trick is necessary to
show the problem on Linux even for such a gigantic set
of paths. Other operating systems have much smaller
limits (e.g., a real-world case was seen with only 5K
files on OS X).
2. Even when it does work, it's really slow. The pathspec
code is not optimized for huge numbers of paths. Here's
the same case without the ulimit:
$ time git add -p drivers
No changes.
real 0m16.559s
user 0m53.140s
sys 0m0.220s
We can improve this by skipping "ls-files" completely, and
just feeding the original pathspecs to the diff commands.
This solution was discussed in 2010:
http://public-inbox.org/git/20100105041438.GB12574@coredump.intra.peff.net/
but at the time the diff code's pathspecs were more
primitive than those used by ls-files (e.g., they did not
support globs). Making the change would have caused a
user-visible regression, so we didn't.
Since then, the pathspec code has been unified, and the diff
commands natively understand pathspecs like '*.c'.
This patch implements that solution. That skips the
argument-list limits, and the result runs much faster:
$ time git add -p drivers
No changes.
real 0m0.149s
user 0m0.116s
sys 0m0.080s
There are two new tests. The first just exercises the
globbing behavior to confirm that we are not causing a
regression there. The second checks the actual argument
behavior using GIT_TRACE. We _could_ do it with the "ulimit
-s" trick, as above. But that would mean the test could only
run where "ulimit -s" works. And tests of that sort are
expensive, because we have to come up with enough files to
actually bust the limit (we can't just shrink the "128" down
infinitely, since it is also the in-program stack size).
Finally, two caveats and possibilities for future work:
a. This fixes one argument-list expansion, but there may
be others. In fact, it's very likely that if you run
"git add -i" and select a large number of modified
files that the script would try to feed them all to a
single git command.
In practice this is probably fine. The real issue here
is that the argument list was growing with the _total_
number of files, not the number of modified or selected
files.
b. If the repository contains filenames with literal wildcard
characters (e.g., "foo*"), the original code expanded
them via "ls-files" and then fed those wildcard names
to "diff-index", which would have treated them as
wildcards. This was a bug, which is now fixed (though
unless you really go through some contortions with
":(literal)", it's likely that your original pathspec
would match whatever the accidentally-expanded wildcard
would anyway).
So this takes us one step closer to working correctly
with files whose names contain wildcard characters, but
it's likely that others remain (e.g., if "git add -i"
feeds the selected paths to "git add").
Reported-by: Wincent Colaiuta <win@wincent.com>
Reported-by: Mislav Marohnić <mislav.marohnic@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In our own .gitattributes file we have attributes such as:
*.[ch] whitespace=indent,trail,space
When querying for attributes we want to be able to ask for the exact
value, i.e.
git ls-files :(attr:whitespace=indent,trail,space)
should work, but the commas are used in the attr magic to introduce
the next attr, such that this query currently fails with
fatal: Invalid pathspec magic 'trail' in ':(attr:whitespace=indent,trail,space)'
This change allows escaping characters by a backslash, such that the query
git ls-files :(attr:whitespace=indent\,trail\,space)
will match all path that have the value "indent,trail,space" for the
whitespace attribute. To accomplish this, we need to modify two places.
First `parse_long_magic` needs to not stop early upon seeing a comma or
closing paren that is escaped. As a second step we need to remove any
escaping from the attr value.
Based on a patch by Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pathspec mechanism is extended via the new
":(attr:eol=input)pattern/to/match" syntax to filter paths so that it
requires paths to not just match the given pattern but also have the
specified attrs attached for them to be chosen.
Based on a patch by Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --quiet" relies on the size field in diff_filespec to be
correctly populated, but diff_populate_filespec() helper function
made an incorrect short-cut when asked only to populate the size
field for paths that need to go through convert_to_git() (e.g. CRLF
conversion).
* jc/diff-populate-filespec-size-only-fix:
diff: do not short-cut CHECK_SIZE_ONLY check in diff_populate_filespec()
The code to parse "git log -L..." command line was buggy when there
are many ranges specified with -L; overrun of the allocated buffer
has been fixed.
* ax/line-log-range-merge-fix:
line-log.c: prevent crash during union of too many ranges
Git v2.12 was shipped with an embarrassing breakage where various
operations that verify paths given from the user stopped dying when
seeing an issue, and instead later triggering segfault.
* js/realpath-pathdup-fix:
real_pathdup(): fix callsites that wanted it to die on error
t1501: demonstrate NULL pointer access with invalid GIT_WORK_TREE
The patch subcommand of "git add -i" was meant to have paths
selection prompt just like other subcommand, unlike "git add -p"
directly jumps to hunk selection. Recently, this was broken and
"add -i" lost the paths selection dialog, but it now has been
fixed.
* jk/add-i-patch-do-prompt:
add--interactive: fix missing file prompt for patch mode with "-i"
Sometimes a set of repositories want to share configuration settings
among themselves that are distinct from other such sets of repositories.
A user may work on two projects, each of which have multiple
repositories, and use one user.email for one project while using another
for the other.
Setting $GIT_DIR/.config works, but if the penalty of forgetting to
update $GIT_DIR/.config is high (especially when you end up cloning
often), it may not be the best way to go. Having the settings in
~/.gitconfig, which would work for just one set of repositories, would
not well in such a situation. Having separate ${HOME}s may add more
problems than it solves.
Extend the include.path mechanism that lets a config file include
another config file, so that the inclusion can be done only when some
conditions hold. Then ~/.gitconfig can say "include config-project-A
only when working on project-A" for each project A the user works on.
In this patch, the only supported grouping is based on $GIT_DIR (in
absolute path), so you would need to group repositories by directory, or
something like that to take advantage of it.
We already have include.path for unconditional includes. This patch goes
with includeIf.<condition>.path to make it clearer that a condition is
required. The new config has the same backward compatibility approach as
include.path: older git versions that don't understand includeIf will
simply ignore them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test just checks that old clients can clone and fetch
from a newer git-daemon. The opposite should also be true,
but it's hard to test ancient versions of git-daemon because
they lack basic options like "--listen".
Note that we have to make a slight tweak to the
lib-git-daemon helper from the regular tests, so that it
starts the daemon with our correct git.a version.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current test suite is good at letting you test a
particular version of Git. But it's not very good at letting
you test _two_ versions and seeing how they interact (e.g.,
one cloning from the other).
This commit adds a test harness that will build two
arbitrary versions of git and make it easy to call them from
inside your tests. See the README and the example script for
details.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash save" takes a pathspec so that the local changes can be
stashed away only partially.
* tg/stash-push:
stash: allow pathspecs in the no verb form
stash: use stash_push for no verb form
stash: teach 'push' (and 'create_stash') to honor pathspec
stash: refactor stash_create
stash: add test for the create command line arguments
stash: introduce push verb
When a redirected http transport gets an error during the
redirected request, we ignored the error we got from the server,
and ended up giving a not-so-useful error message.
* jt/http-base-url-update-upon-redirect:
http: attempt updating base URL only if no error
"Cc:" on the trailer part does not have to conform to RFC strictly,
unlike in the e-mail header. "git send-email" has been updated to
ignore anything after '>' when picking addresses, to allow non-address
cruft like " # stable 4.4" after the address.
* jh/send-email-one-cc:
send-email: only allow one address per body tag
user.email that consists of only cruft chars should consistently
error out, but didn't.
* jk/ident-empty:
ident: do not ignore empty config name/email
ident: reject all-crud ident name
ident: handle NULL email when complaining of empty name
ident: mark error messages for translation
The code to parse "git -c VAR=VAL cmd" and set configuration
variable for the duration of cmd had two small bugs, which have
been fixed.
* jc/config-case-cmdline-take-2:
config: use git_config_parse_key() in git_config_parse_parameter()
config: move a few helper functions up
When the "branch --list" command was converted to use the --format
facility from the ref-filter API, we forgot to honor the --abbrev
setting in the default output format and instead used a hardcoded
"7".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some situations it is useful to know if the given repository
is a submodule of another repository.
Add the flag --show-superproject-working-tree to git-rev-parse
to make it easy to find out if there is a superproject. When no
superproject exists, the output will be empty.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 4ac9006f83 (real_path: have callers use real_pathdup and
strbuf_realpath, 2016-12-12), we changed the xstrdup(real_path())
pattern to use real_pathdup() directly.
The problem with this change is that real_path() calls
strbuf_realpath() with die_on_error = 1 while real_pathdup() calls
it with die_on_error = 0. Meaning that in cases where real_path()
causes Git to die() with an error message, real_pathdup() is silent
and returns NULL instead.
The callers, however, are ill-prepared for that change, as they expect
the return value to be non-NULL (and otherwise the function died
with an appropriate error message).
Fix this by extending real_pathdup()'s signature to accept the
die_on_error flag and simply pass it through to strbuf_realpath(),
and then adjust all callers after a careful audit whether they would
handle NULLs well.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When GIT_WORK_TREE does not specify a valid path, we should error
out, instead of crashing.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way a share index file will not be garbage collected if
we still read from an index it is based from.
As we need to read the current index before creating a new
one, the tests have to be adjusted, so that we don't expect
an old shared index file to be deleted right away when we
create a new one.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea of the test case "git -p - core.pager is not used from
subdirectory" was to verify that the setup_git_directory() function had
not been called just to obtain the core.pager setting.
However, we are about to fix the early config machinery so that it
*does* work, without messing up the global state.
Once that is done, the core.pager setting *will* be used, even when
running from a subdirectory, and that is a Good Thing.
The intention of that test case, however, was to verify that the
setup_git_directory() function has not run, because it changes global
state such as the current working directory.
To keep that spirit, but fix the incorrect assumption, this patch
replaces that test case by a new one that verifies that the pager is
run in the subdirectory, i.e. that the current working directory has
not been changed at the time the pager is configured and launched, even
if the `rev-parse` command requires a .git/ directory and *will* change
the working directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the git_commit_non_empty_tree function would always pass any
commit with no parents to git-commit-tree, regardless of whether the
tree was nonempty. The new commit would then be recorded in the
filter-branch revision map, and subsequent commits which leave the tree
untouched would be correctly filtered.
With this change, parentless commits with an empty tree are correctly
pruned, and an empty file is recorded in the revision map, signifying
that it was rewritten to "no commits." This works naturally with the
parent mapping for subsequent commits.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sanity check before changing the logic in git_commit_non_empty_tree.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New test to expose a bug in filter-branch whereby the root commit is
never pruned, even though its tree is empty and --prune-empty is given.
The setup isn't exactly pretty, but I couldn't think of a simpler way to
create a parallel commit graph sans the first commit.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing implementation of range_set_union does not correctly
reallocate memory, leading to a heap overflow when it attempts to union
more than 24 separate line ranges.
For struct range_set *out to grow correctly it must have out->nr set to
the current size of the buffer when it is passed to range_set_grow.
However, the existing implementation of range_set_union only updates
out->nr at the end of the function, meaning that it is always zero
before this. This results in range_set_grow never growing the buffer, as
well as some of the union logic itself being incorrect as !out->nr is
always true.
The reason why 24 is the limit is that the first allocation of size 1
ends up allocating a buffer of size 24 (due to the call to alloc_nr in
ALLOC_GROW). This goes some way to explain why this hasn't been
caught before.
Fix the problem by correctly updating out->nr after reallocating the
range_set. As this results in out->nr containing the same value as the
variable o, replace o with out->nr as well.
Finally, add a new test to help prevent the problem reoccurring in the
future. Thanks to Vegard Nossum for writing the test.
Signed-off-by: Allan Xavier <allan.x.xavier@oracle.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's tempting to say:
./run v1.0.0 HEAD
to see how we've sped up Git over the years. Unfortunately,
this doesn't quite work because versions of Git prior to
v1.7.0 lack bin-wrappers, so our "run" script doesn't
correctly put them in the PATH.
Worse, it means we silently find whatever other "git" is in
the PATH, and produce test results that have no bearing on
what we asked for.
Let's fallback to the main git directory when bin-wrappers
isn't present. Many modern perf scripts won't run with such
an antique version of Git, of course, but at least those
failures are detected and reported (and you're free to write
a limited perf script that works across many versions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1a0962dee (t/perf: fix regression in testing older
versions of git, 2016-06-22), we point "$MODERN_GIT" to a
copy of git that matches the t/perf script itself, and which
can be used for tasks outside of the actual timings. This is
needed because the setup done by perf scripts keeps moving
forward in time, and may use features that the older
versions of git we are testing do not have.
That commit used $MODERN_GIT to fix a case where we relied
on the relatively recent --git-path option. But if you go
back further still, there are more problems.
Since 7501b5921 (perf: make the tests work in worktrees,
2016-05-13), we use "git -C", but versions of git older than
44e1e4d67 (git: run in a directory given with -C option,
2013-09-09) don't know about "-C". So testing an old version
of git with a new version of t/perf will fail the setup
step.
We can fix this by using $MODERN_GIT during the setup;
there's no need to use the antique version, since it doesn't
affect the timings. Likewise, we'll adjust the "init"
invocation; antique versions of git called this "init-db".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In p0001, a variable was created in a test_expect_success block to be
used in later test_perf blocks, but was not exported. This caused the
variable to not appear in those blocks (this can be verified by writing
'test -n "$commit"' in those blocks), resulting in a slightly different
invocation than what was intended. Export that variable.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance filter_refs (which decides whether a request for an unadvertised
object should be sent to the server) to record a new match status on the
"struct ref" when a request is not allowed, and have
report_unmatched_refs check for this status and print a special error
message, "Server does not allow request for unadvertised object".
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" currently doesn't bother to check that it got all refs it
sought, because the common case of requesting a nonexistent ref triggers
a die() in get_fetch_map. However, there's at least one case that
slipped through: "git fetch REMOTE SHA1" if the server doesn't allow
requests for unadvertised objects. Make fetch_refs_via_pack (which is
on the "git fetch" code path) call report_unmatched_refs so that we at
least get an error message in that case.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare to reuse this code in transport.c for "git fetch".
While we're here, internationalize the existing error message.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we parse "git checkout $NAME", we try to interpret
$NAME as a local branch-name. If it is, then we point HEAD
to that branch. Otherwise, we detach the HEAD at whatever
commit $NAME points to.
We do the interpretation by calling strbuf_branchname(), and
then blindly sticking "refs/heads/" on the front. This leads
to nonsense results when expansions like "@{upstream}" or
"@" point to something besides a local branch. We end up
with a local branch name like "refs/heads/origin/master" or
"refs/heads/HEAD".
Normally this has no user-visible effect because those
branches don't exist, and so we fallback to feeding the
result to get_sha1(), which resolves them correctly.
But as the new test in t3204 shows, there are corner cases
where the effect is observable, and we check out the wrong
local branch rather than detaching to the correct one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function asks strbuf_branchname() to expand any @-marks
in the branchname, and then we blindly stick refs/heads/ in
front of the result. This is obviously nonsense if the
expansion is "HEAD" or a ref in refs/remotes/.
The most obvious end-user effect is that creating or
renaming a branch with an expansion may have confusing
results (e.g., creating refs/heads/origin/master from
"@{upstream}" when the operation should be disallowed).
We can fix this by telling strbuf_branchname() that we are
only interested in local expansions. Any unexpanded bits are
then fed to check_ref_format(), which either disallows them
(in the case of "@{upstream}") or lets them through
("refs/heads/@" is technically valid, if a bit silly).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use strbuf_branchname() to expand the branch name from
the command line, so you can delete the branch given by
@{-1}, for example. However, we allow other nonsense like
"@", and we do not respect our "-r" flag (so we may end up
deleting an oddly-named local ref instead of a remote one).
We can fix this by passing the appropriate "allowed" flag to
strbuf_branchname().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-branch feeds the branch names from the command line to
strbuf_branchname(), but we do not yet tell that function
which kinds of expansions should be allowed. Let's create a
set of tests that cover both the allowed and disallowed
cases.
That shows off some breakages where we currently create or
delete the wrong ref (and will make sure that we do not
break any cases that _should_ be working when we do add more
restrictions).
Note that we check branch creation and deletion, but do not
bother with renames. Those follow the same code path as
creation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interpret_branch_name() function takes a ptr/len pair
for the name, but you can pass "0" for "namelen", which will
cause it to check the length with strlen().
However, before we do that auto-namelen magic, we call
interpret_nth_prior_checkout(), which gets fed the bogus
"0". This was broken by 8cd4249c4 (interpret_branch_name:
always respect "namelen" parameter, 2014-01-15). Though to
be fair to that commit, it was broken in the _opposite_
direction before, where we would always treat "name" as a
string even if a length was passed.
You can see the bug with "git log -g @{-1}". That code path
always passes "0", and without this patch it cannot figure
out which branch's reflog to show.
We can fix it by a small reordering of the code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers of diff_populate_filespec() can choose to ask only for the
size of the blob without grabbing the blob data, and the function,
after running lstat() when the filespec points at a working tree
file, returns by copying the value in size field of the stat
structure into the size field of the filespec when this is the case.
However, this short-cut cannot be taken if the contents from the
path needs to go through convert_to_git(), whose resulting real blob
data may be different from what is in the working tree file.
As "git diff --quiet" compares the .size fields of filespec
structures to skip content comparison, this bug manifests as a
false "there are differences" for a file that needs eol conversion,
for example.
Reported-by: Mike Crowe <mac@mcrowe.com>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When invoked as "git add -i", each menu interactive menu
option prompts the user to select a list of files. This
includes the "patch" option, which gets the list before
starting the hunk-selection loop.
As "git add -p", it behaves differently, and jumps straight
to the hunk selection loop.
Since 0539d5e6d (i18n: add--interactive: mark patch prompt
for translation, 2016-12-14), the "add -i" case mistakenly
jumps to straight to the hunk-selection loop. Prior to that
commit the distinction between the two cases was managed by
the $patch_mode variable. That commit used $patch_mode for
something else, and moved the old meaning to the "$cmd"
variable. But it forgot to update the $patch_mode check
inside patch_update_cmd() which controls the file-list
behavior.
The simplest fix would be to change that line to check $cmd.
But while we're here, let's use a less obscure name for this
flag: $patch_mode_only, a boolean which tells whether we are
in full-interactive mode or only in patch-mode.
Reported-by: Henrik Grubbström <grubba@grubba.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the gitweb tests to skip when we can't load the Time::HiRes
module.
Gitweb needs this module to work. It has been in perl core since v5.8,
which is the oldest version we support. However CentOS (and perhaps
some other distributions) carve it into its own non-core-perl package
that's not installed along with /usr/bin/perl by default. Without this
we'll hard fail the gitweb tests when trying to load the module.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the phrasing so that instead of saying that the CGI module is
unusable, we say that it's not available.
This came up on the git mailing list in
<4b34e3a0-3da7-d821-2a7f-9a420ac1d3f6@gmail.com> from Jakub Narębski.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a new split-index and there is a big number of cache
entries in the split-index compared to the shared index, it is a
good idea to regenerate the shared index.
By default when the ratio reaches 20%, we will push back all
the entries from the split-index into a new shared index file
instead of just creating a new split-index file.
The threshold can be configured using the
"splitIndex.maxPercentChange" config variable.
We need to adjust the existing tests in t1700 by setting
"splitIndex.maxPercentChange" to 100 at the beginning of t1700,
as the existing tests are assuming that the shared index is
regenerated only when `git update-index --split-index` is used.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This improves test indentation by getting rid of the outdated
here document style.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that stash_push is used in the no verb form of stash, allow
specifying the command line for this form as well. Always use -- to
disambiguate pathspecs from other non-option arguments.
Also make git stash -p an alias for git stash push -p. This allows
users to use git stash -p <pathspec>.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have stash_push, which accepts pathspec arguments, use
it instead of stash_save in git stash without any additional verbs.
Previously we allowed git stash -- -message, which is no longer allowed
after this patch. Messages starting with a hyphen was allowed since
3c2eb80f, ("stash: simplify defaulting to "save" and reject unknown
options"). However it was never the intent to allow that, but rather it
was allowed accidentally.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While working on a repository, it's often helpful to stash the changes
of a single or multiple files, and leave others alone. Unfortunately
git currently offers no such option. git stash -p can be used to work
around this, but it's often impractical when there are a lot of changes
over multiple files.
Allow 'git stash push' to take pathspec to specify which paths to stash.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http.c supports HTTP redirects of the form
http://foo/info/refs?service=git-upload-pack
-> http://anything
-> http://bar/info/refs?service=git-upload-pack
(that is to say, as long as the Git part of the path and the query
string is preserved in the final redirect destination, the intermediate
steps can have any URL). However, if one of the intermediate steps
results in an HTTP exception, a confusing "unable to update url base
from redirection" message is printed instead of a Curl error message
with the HTTP exception code.
This was introduced by 2 commits. Commit c93c92f ("http: update base
URLs when we see redirects", 2013-09-28) introduced a best-effort
optimization that required checking if only the "base" part of the URL
differed between the initial request and the final redirect destination,
but it performed the check before any HTTP status checking was done. If
something went wrong, the normal code path was still followed, so this
did not cause any confusing error messages until commit 6628eb4 ("http:
always update the base URL for redirects", 2016-12-06), which taught
http to die if the non-"base" part of the URL differed.
Therefore, teach http to check the HTTP status before attempting to
check if only the "base" part of the URL differed. This commit teaches
http_request_reauth to return early without updating options->base_url
upon an error; the only invoker of this function that passes a non-NULL
"options" is remote-curl.c (through "http_get_strbuf"), which only uses
options->base_url for an informational message in the situations that
this commit cares about (that is, when the return value is not HTTP_OK).
The included test checks that the redirect scheme at the beginning of
this commit message works, and that returning a 502 in the middle of the
redirect scheme produces the correct result. Note that this is different
from the test in commit 6628eb4 ("http: always update the base URL for
redirects", 2016-12-06) in that this commit tests that a Git-shaped URL
(http://.../info/refs?service=git-upload-pack) works, whereas commit
6628eb4 tests that a non-Git-shaped URL
(http://.../info/refs/foo?service=git-upload-pack) does not work (even
though Git is processing that URL) and is an error that is fatal, not
silently swallowed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote rm X", when a branch has remote X configured as the
value of its branch.*.remote, tried to remove branch.*.remote and
branch.*.merge and failed if either is unset.
* rl/remote-allow-missing-branch-name-merge:
remote: ignore failure to remove missing branch.<name>.merge
"git update-ref -d" and other operations to delete references did
not leave any entry in HEAD's reflog when the reference being
deleted was the current branch. This is not a problem in practice
because you do not want to delete the branch you are currently on,
but caused renaming of the current branch to something else not to
be logged in a useful way.
* km/delete-ref-reflog-message:
branch: record creation of renamed branch in HEAD's log
rename_ref: replace empty message in HEAD's log
update-ref: pass reflog message to delete_ref()
delete_ref: accept a reflog message argument
The "--git-path", "--git-common-dir", and "--shared-index-path"
options of "git rev-parse" did not produce usable output. They are
now updated to show the path to the correct file, relative to where
the caller is.
* js/git-path-in-subdir:
rev-parse: fix several options when running in a subdirectory
rev-parse tests: add tests executed from a subdirectory
"git ls-remote" and "git archive --remote" are designed to work
without being in a directory under Git's control. However, recent
updates revealed that we randomly look into a directory called
.git/ without actually doing necessary set-up when working in a
repository. Stop doing so.
* jn/remote-helpers-with-git-dir:
remote helpers: avoid blind fall-back to ".git" when setting GIT_DIR
remote: avoid reading $GIT_DIR config in non-repo
The code to parse the command line "git grep <patterns>... <rev>
[[--] <pathspec>...]" has been cleaned up, and a handful of bugs
have been fixed (e.g. we used to check "--" if it is a rev).
* jk/grep-no-index-fix:
grep: treat revs the same for --untracked as for --no-index
grep: do not diagnose misspelt revs with --no-index
grep: avoid resolving revision names in --no-index case
grep: fix "--" rev/pathspec disambiguation
grep: re-order rev-parsing loop
grep: do not unnecessarily query repo for "--"
grep: move thread initialization a little lower
A "gc.log" file left by a backgrounded "gc --auto" disables further
automatic gc; it has been taught to run at least once a day (by
default) by ignoring a stale "gc.log" file that is too old.
* dt/gc-ignore-old-gc-logs:
gc: ignore old gc.log files
The command line options for ssh invocation needs to be tweaked for
some implementations of SSH (e.g. PuTTY plink wants "-P <port>"
while OpenSSH wants "-p <port>" to specify port to connect to), and
the variant was guessed when GIT_SSH environment variable is used
to specify it. The logic to guess now applies to the command
specified by the newer GIT_SSH_COMMAND and also core.sshcommand
configuration variable, and comes with an escape hatch for users to
deal with misdetected cases.
* sf/putty-w-args:
connect.c: stop conflating ssh command names and overrides
connect: Add the envvar GIT_SSH_VARIANT and ssh.variant config
git_connect(): factor out SSH variant handling
connect: rename tortoiseplink and putty variables
connect: handle putty/plink also in GIT_SSH_COMMAND
"git rebase -i" starts using the recently updated "sequencer" code.
* js/rebase-helper:
rebase -i: use the rebase--helper builtin
rebase--helper: add a builtin helper for interactive rebases
The gitattributes machinery is being taught to work better in a
multi-threaded environment.
* bw/attr: (27 commits)
attr: reformat git_attr_set_direction() function
attr: push the bare repo check into read_attr()
attr: store attribute stack in attr_check structure
attr: tighten const correctness with git_attr and match_attr
attr: remove maybe-real, maybe-macro from git_attr
attr: eliminate global check_all_attr array
attr: use hashmap for attribute dictionary
attr: change validity check for attribute names to use positive logic
attr: pass struct attr_check to collect_some_attrs
attr: retire git_check_attrs() API
attr: convert git_check_attrs() callers to use the new API
attr: convert git_all_attrs() to use "struct attr_check"
attr: (re)introduce git_check_attr() and struct attr_check
attr: rename function and struct related to checking attributes
attr.c: outline the future plans by heavily commenting
Documentation: fix a typo
attr.c: add push_stack() helper
attr: support quoting pathname patterns in C style
attr.c: plug small leak in parse_attr_line()
attr.c: tighten constness around "git_attr" structure
...
Clean-up and updates to command line completion (in contrib/).
* sg/completion: (22 commits)
completion: restore removed line continuating backslash
completion: cache the path to the repository
completion: extract repository discovery from __gitdir()
completion: don't guard git executions with __gitdir()
completion: consolidate silencing errors from git commands
completion: don't use __gitdir() for git commands
completion: respect 'git -C <path>'
rev-parse: add '--absolute-git-dir' option
completion: fix completion after 'git -C <path>'
completion: don't offer commands when 'git --opt' needs an argument
completion: list short refs from a remote given as a URL
completion: don't list 'HEAD' when trying refs completion outside of a repo
completion: list refs from remote when remote's name matches a directory
completion: respect 'git --git-dir=<path>' when listing remote refs
completion: fix most spots not respecting 'git --git-dir=<path>'
completion: ensure that the repository path given on the command line exists
completion tests: add tests for the __git_refs() helper function
completion tests: check __gitdir()'s output in the error cases
completion tests: consolidate getting path of current working directory
completion tests: make the $cur variable local to the test helper functions
...
The "negative" pathspec feature was somewhat more cumbersome to use
than necessary in that its short-hand used "!" which needed to be
escaped from shells, and it required "exclude from what?" specified.
* lt/pathspec-negative:
pathspec: don't error out on all-exclusionary pathspec patterns
pathspec magic: add '^' as alias for '!'
"git tag" did not leave useful message when adding a new entry to
reflog; this was left unnoticed for a long time because refs/tags/*
doesn't keep reflog by default.
* cw/tag-reflog-message:
tag: generate useful reflog message
Optimizes resource usage while enumerating refs from alternate
object store, to help receiving end of "push" that hosts a
repository with many "forks".
* jk/alternate-ref-optim:
receive-pack: avoid duplicates between our refs and alternates
receive-pack: treat namespace .have lines like alternates
receive-pack: fix misleading namespace/.have comment
receive-pack: use oidset to de-duplicate .have lines
add oidset API
fetch-pack: cache results of for_each_alternate_ref
for_each_alternate_ref: replace transport code with for-each-ref
for_each_alternate_ref: pass name/oid instead of ref struct
for_each_alternate_ref: use strbuf for path allocation
for_each_alternate_ref: stop trimming trailing slashes
for_each_alternate_ref: handle failure from real_pathdup()
The code to list branches in "git branch" has been consolidated
with the more generic ref-filter API.
* kn/ref-filter-branch-list: (21 commits)
ref-filter: resurrect "strip" as a synonym to "lstrip"
branch: implement '--format' option
branch: use ref-filter printing APIs
branch, tag: use porcelain output
ref-filter: allow porcelain to translate messages in the output
ref-filter: add an 'rstrip=<N>' option to atoms which deal with refnames
ref-filter: modify the 'lstrip=<N>' option to work with negative '<N>'
ref-filter: Do not abruptly die when using the 'lstrip=<N>' option
ref-filter: rename the 'strip' option to 'lstrip'
ref-filter: make remote_ref_atom_parser() use refname_atom_parser_internal()
ref-filter: introduce refname_atom_parser()
ref-filter: introduce refname_atom_parser_internal()
ref-filter: make "%(symref)" atom work with the ':short' modifier
ref-filter: add support for %(upstream:track,nobracket)
ref-filter: make %(upstream:track) prints "[gone]" for invalid upstreams
ref-filter: introduce format_ref_array_item()
ref-filter: move get_head_description() from branch.c
ref-filter: modify "%(objectname:short)" to take length
ref-filter: implement %(if:equals=<string>) and %(if:notequals=<string>)
ref-filter: include reference to 'used_atom' within 'atom_value'
...
The <url> part in "http.<url>.<variable>" configuration variable
can now be spelled with '*' that serves as wildcard.
E.g. "http.https://*.example.com.proxy" can be used to specify the
proxy used for https://a.example.com, https://b.example.com, etc.,
i.e. any host in the example.com domain.
* ps/urlmatch-wildcard:
urlmatch: allow globbing for the URL host part
urlmatch: include host in urlmatch ranking
urlmatch: split host and port fields in `struct url_info`
urlmatch: enable normalization of URLs with globs
mailmap: add Patrick Steinhardt's work address
When "git merge" detects a path that is renamed in one history
while the other history deleted (or modified) it, it now reports
both paths to help the user understand what is going on in the two
histories being merged.
* mm/merge-rename-delete-message:
merge-recursive: make "CONFLICT (rename/delete)" message show both paths
Deletion of a branch "foo/bar" could remove .git/refs/heads/foo
once there no longer is any other branch whose name begins with
"foo/", but we didn't do so so far. Now we do.
* mh/ref-remove-empty-directory: (23 commits)
files_transaction_commit(): clean up empty directories
try_remove_empty_parents(): teach to remove parents of reflogs, too
try_remove_empty_parents(): don't trash argument contents
try_remove_empty_parents(): rename parameter "name" -> "refname"
delete_ref_loose(): inline function
delete_ref_loose(): derive loose reference path from lock
log_ref_write_1(): inline function
log_ref_setup(): manage the name of the reflog file internally
log_ref_write_1(): don't depend on logfile argument
log_ref_setup(): pass the open file descriptor back to the caller
log_ref_setup(): improve robustness against races
log_ref_setup(): separate code for create vs non-create
log_ref_write(): inline function
rename_tmp_log(): improve error reporting
rename_tmp_log(): use raceproof_create_file()
lock_ref_sha1_basic(): use raceproof_create_file()
lock_ref_sha1_basic(): inline constant
raceproof_create_file(): new function
safe_create_leading_directories(): set errno on SCLD_EXISTS
safe_create_leading_directories_const(): preserve errno
...
"git repack --depth=<n>" for a long time busted the specified depth
when reusing delta from existing packs. This has been corrected.
* jk/delta-chain-limit:
pack-objects: convert recursion to iteration in break_delta_chain()
pack-objects: enforce --depth limit in reused deltas
"git describe" and "git name-rev" have been taught to take more
than one refname patterns to restrict the set of refs to base their
naming output on, and also learned to take negative patterns to
name refs not to be used for naming via their "--exclude" option.
* jk/describe-omit-some-refs:
describe: teach describe negative pattern matches
describe: teach --match to accept multiple patterns
name-rev: add support to exclude refs by pattern match
name-rev: extend --refs to accept multiple patterns
doc: add documentation for OPT_STRING_LIST
Change the tests that fail to when we run the test suite as root, due
to calling "cvs commit".
The GNU cvs package has an optional compile-time CVS_BADROOT
flag. When compiled with this flag "cvs commit" will refuse to commit
anything as root. On my Debian box this isn't compiled in[1] in, but
on CentOS it is.
I've run all the t/t*cvs*.sh tests, and these are the only two that
fail. For some reason e.g. t9402-git-cvsserver-refs.sh still works as
root despite doing "cvs commit", I haven't dug into why.
This commit is technically being overzealous, we could do better by
making a mock cvs commit as root and run the tests if that works, but
I don't see any compelling reason to bend over backwards to run these
tests in all cases, just skipping them as root seems good enough.
1. Per: strings /usr/bin/cvs|grep 'is not allowed to commit'
Using cvs 1.11.23 on CentOS, 1.12.13-MirDebian-18 on Debian.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In one test, we use "git checkout --orphan HEAD" to create
an unborn branch. Confusingly, the resulting branch is named
"refs/heads/HEAD". The original probably meant something
like:
git checkout --orphan orphaned-branch HEAD
Let's just use "orphaned-branch" here to make this less
confusing. Putting HEAD in the second argument is already
implied.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adding comments after a tag in the body is a common practise (e.g. in
the Linux kernel) and git-send-email has been supporting this for years
by removing any trailing cruft after the address.
After some recent changes, any trailing comment is now instead appended
to the recipient name (with some random white space inserted) resulting
in undesirable noise in the headers, for example:
CC: "# 3 . 3 . x : 1b9508f : sched : Rate-limit newidle" <stable@vger.kernel.org>
Revert to the earlier behaviour of discarding anything after the (first)
address in a tag while parsing the body.
Note that multiple addresses after are still allowed after a command
line switch (and in a CC header field).
Also note that --suppress-cc=self was never honoured when using multiple
addresses in a tag.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parsing of one-shot assignments of configuration variables that
come from the command line historically was quite loose and allowed
anything to pass. It also downcased everything in the variable name,
even a three-level <section>.<subsection>.<variable> name in which
the <subsection> part must be treated in a case sensitive manner.
Existing git_config_parse_key() helper is used to parse the variable
name that comes from the command line, i.e. "git config VAR VAL",
and handles these details correctly. Replace the strbuf_tolower()
call in git_config_parse_parameter() with a call to it to correct
both issues. git_config_parse_key() does a bit more things that are
not necessary for the purpose of this codepath (e.g. it allocates a
separate buffer to return the canonicalized variable name because it
takes a "const char *" input), but we are not in a performance-critical
codepath here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we read user.name and user.email from a config file,
they go into strbufs. When a caller asks ident_default_name()
for the value, we fallback to auto-detecting if the strbuf
is empty.
That means that explicitly setting an empty string in the
config is identical to not setting it at all. This is
potentially confusing, as we usually accept a configured
value as the final value.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An ident name consisting of only "crud" characters (like
whitespace or punctuation) is effectively the same as an
empty one, because our strbuf_addstr_without_crud() will
remove those characters.
We reject an empty name when formatting a strict ident, but
don't notice an all-crud one because our check happens
before the crud-removal step.
We could skip past the crud before checking for an empty
name, but let's make it a separate code path, for two
reasons. One is that we can give a more specific error
message. And two is that unlike a blank name, we probably
don't want to kick in the fallback-to-username behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we see an empty name, we complain about and mention the
matching email in the error message (to give it some
context). However, the "email" pointer may be NULL here if
we were planning to fill it in later from ident_default_email().
This was broken by 59f929596 (fmt_ident: refactor strictness
checks, 2016-02-04). Prior to that commit, we would look up
the default name and email before doing any other actions.
So one solution would be to go back to that.
However, we can't just do so blindly. The logic for handling
the "!email" condition has grown since then. In particular,
looking up the default email can die if getpwuid() fails,
but there are other errors that should take precedence.
Commit 734c7789a (ident: check for useConfigOnly before
auto-detection of name/email, 2016-03-30) reordered the
checks so that we prefer the error message for
useConfigOnly.
Instead, we can observe that while the name-handling depends
on "email" being set, the reverse is not true. So we can
simply set up the email variable first.
This does mean that if both are bogus, we'll complain about
the email before the name. But between the two, there is no
reason to prefer one over the other.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not all too unusual for a branch to use "branch.<name>.remote"
without "branch.<name>.merge". You may be using the 'push.default'
configuration set to 'current', for example, and do
$ git checkout -b side colleague/side
$ git config branch.side.remote colleague
However, "git remote rm" to remove the remote used in such a manner
fails with
"fatal: could not unset 'branch.<name>.merge'"
because it assumes that a branch that has .remote defined must also
have .merge defined. Detect the "cannot unset because it is not set
to begin with" case and ignore it.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Renaming the current branch adds an event to the current branch's log
and to HEAD's log. However, the logged entries differ. The entry in
the branch's log represents the entire renaming operation (the old and
new hash are identical), whereas the entry in HEAD's log represents
the deletion only (the new sha1 is null).
Extend replace_each_worktree_head_symref(), whose only caller is
branch_rename(), to take a reflog message argument. This allows the
creation of the new ref to be recorded in HEAD's log. As a result,
the renaming event is represented by two entries (a deletion and a
creation entry) in HEAD's log.
It's a bit unfortunate that the branch's log and HEAD's log now
represent the renaming event in different ways. Given that the
renaming operation is not atomic, the two-entry form is a more
accurate representation of the operation and is more useful for
debugging purposes if a failure occurs between the deletion and
creation events. It would make sense to move the branch's log to the
two-entry form, but this would involve changes to how the rename is
carried out and to how the update flags and reflogs are processed for
deletions, so it may not be worth the effort.
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the current branch is renamed, the deletion of the old ref is
recorded in HEAD's log with an empty message. Now that delete_ref()
accepts a reflog message, provide a more descriptive message by
passing along the log message that is given to rename_ref().
The next step will be to extend HEAD's log to also include the second
part of the rename, the creation of the new branch.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that delete_ref() accepts a reflog message, pass the user-provided
message to delete_ref() rather than silently dropping it.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently there is no test showing the expected behaviour of git stash
create's command line arguments. Add a test for that to show the
current expected behaviour and to make sure future refactorings don't
break those expectations.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new git stash push verb in addition to git stash save. The
push verb is used to transition from the current command line arguments
to a more conventional way, in which the message is given as an argument
to the -m option.
This allows us to have pathspecs at the end of the command line
arguments like other Git commands do, so that the user can say which
subset of paths to stash (and leave others behind).
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to making git_path() aware of certain file names that need
to be handled differently e.g. when running in worktrees, the commit
557bd833bb (git_path(): be aware of file relocation in $GIT_DIR,
2014-11-30) also snuck in a new option for `git rev-parse`:
`--git-path`.
On the face of it, there is no obvious bug in that commit's diff: it
faithfully calls git_path() on the argument and prints it out, i.e. `git
rev-parse --git-path <filename>` has the same precise behavior as
calling `git_path("<filename>")` in C.
The problem lies deeper, much deeper. In hindsight (which is always
unfair), implementing the .git/ directory discovery in
`setup_git_directory()` by changing the working directory may have
allowed us to avoid passing around a struct that contains information
about the current repository, but it bought us many, many problems.
In this case, when being called in a subdirectory, `git rev-parse`
changes the working directory to the top-level directory before calling
`git_path()`. In the new working directory, the result is correct. But
in the working directory of the calling script, it is incorrect.
Example: when calling `git rev-parse --git-path HEAD` in, say, the
Documentation/ subdirectory of Git's own source code, the string
`.git/HEAD` is printed.
Side note: that bug is hidden when running in a subdirectory of a
worktree that was added by the `git worktree` command: in that case, the
(correct) absolute path of the `HEAD` file is printed.
In the interest of time, this patch does not go the "correct" route to
introduce a struct with repository information (and removing global
state in the process), instead this patch chooses to detect when the
command was called in a subdirectory and forces the result to be an
absolute path.
While at it, we are also fixing the output of --git-common-dir and
--shared-index-path.
Lastly, please note that we reuse the same strbuf for all of the
relative_path() calls; this avoids frequent allocation (and duplicated
code), and it does not risk memory leaks, for two reasons: 1) the
cmd_rev_parse() function does not return anywhere between the use of
the new strbuf instance and its final release, and 2) git-rev-parse is
one of these "one-shot" programs in Git, i.e. it exits after running
for a very short time, meaning that all allocated memory is released
with the exit() call anyway.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t2027-worktree-list has an incorrect expectation for --git-common-dir
which has been adjusted and marked to expect failure.
Some of the tests added have been marked to expect failure. These
demonstrate a problem with the way that some options to git rev-parse
behave when executed from a subdirectory of the main worktree.
[jes: fixed incorrect assumption that objects/ lives in the
worktree-specific git-dir (it lives in the common dir instead). Also
adjusted t1700 so that the test case does not *need* to be the last
one in that script.]
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git p4" imports changelist that removes paths, it failed to
convert pathnames when the p4 used encoding different from the one
used on the Git side. This has been corrected.
* ls/p4-path-encoding:
git-p4: fix git-p4.pathEncoding for removed files
The push-options given via the "--push-options" option were not
passed through to external remote helpers such as "smart HTTP" that
are invoked via the transport helper.
* sb/push-options-via-transport:
push options: pass push options to the transport helper
git-grep has always disallowed grepping in a tree (as
opposed to the working directory) with both --untracked
and --no-index. But we traditionally did so by first
collecting the revs, and then complaining when any were
provided.
The --no-index option recently learned to detect revs
much earlier. This has two user-visible effects:
- we don't bother to resolve revision names at all. So
when there's a rev/path ambiguity, we always choose to
treat it as a path.
- likewise, when you do specify a revision without "--",
the error you get is "no such path" and not "--untracked
cannot be used with revs".
The rationale for doing this with --no-index is that it is
meant to be used outside a repository, and so parsing revs
at all does not make sense.
This patch gives --untracked the same treatment. While it
_is_ meant to be used in a repository, it is explicitly
about grepping the non-repository contents. Telling the user
"we found a rev, but you are not allowed to use revs" is
not really helpful compared to "we treated your argument as
a path, and could not find it".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To push from or fetch to the current repository, remote helpers need
to know what repository that is. Accordingly, Git sets the GIT_DIR
environment variable to the path to the current repository when
invoking remote helpers.
There is a special case it does not handle: "git ls-remote" and "git
archive --remote" can be run to inspect a remote repository without
being run from any local repository. GIT_DIR is not useful in this
scenario:
- if we are not in a repository, we don't need to set GIT_DIR to
override an existing GIT_DIR value from the environment. If GIT_DIR
is present then we would be in a repository if it were valid and
would have called die() if it weren't.
- not setting GIT_DIR may cause a helper to do the usual discovery
walk to find the repository. But we know we're not in one, or we
would have found it ourselves. So in the worst case it may expend
a little extra effort to try to find a repository and fail (for
example, remote-curl would do this to try to find repository-level
configuration).
So leave GIT_DIR unset in this case. This makes GIT_DIR easier to
understand for remote helper authors and makes transport code less of
a special case for repository discovery.
Noticed using b1ef400e (setup_git_env: avoid blind fall-back to
".git", 2016-10-20) from 'next':
$ cd /tmp
$ git ls-remote https://kernel.googlesource.com/pub/scm/git/git
fatal: BUG: setup_git_env called without repository
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git ls-remote" command can be run outside of a
repository, but needs to look up configured remotes. The
config code is smart enough to handle this case itself, but
we also check the historical "branches" and "remotes" paths
in $GIT_DIR. The git_path() function causes us to blindly
look at ".git/remotes", even if we know we aren't in a git
repository.
For now, this is just an unlikely bug (you probably don't
have such a file if you're not in a repository), but it will
become more obvious once we merge b1ef400ee (setup_git_env:
avoid blind fall-back to ".git", 2016-10-20):
[now]
$ git ls-remote
fatal: No remote configured to list refs from.
[with b1ef400ee]
$ git ls-remote
fatal: BUG: setup_git_env called without repository
We can fix this by skipping these sources entirely when
we're outside of a repository.
The test is a little more complex than the demonstration
above. Rather than detect the correct behavior by parsing
the error message, we can actually set up a case where the
remote name we give is a valid repository, but b1ef400ee
would cause us to die in the configuration step.
This test doesn't fail now, but it future-proofs us for the
b1ef400ee change.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are using --no-index, then our arguments cannot be
revs in the first place. Not only is it pointless to
diagnose them, but if we are not in a repository, we should
not be trying to resolve any names.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We disallow the use of revisions with --no-index, but we
don't actually check and complain until well after we've
parsed the revisions.
This is the cause of a few problems:
1. We shouldn't be calling get_sha1() at all when we aren't
in a repository, as it might access the ref or object
databases. For now, this should generally just return
failure, but eventually it will become a BUG().
2. When there's a "--" disambiguator and you're outside a
repository, we'll complain early with "unable to resolve
revision". But we can give a much more specific error.
3. When there isn't a "--" disambiguator, we still do the
normal rev/path checks. This is silly, as we know we
cannot have any revs with --no-index. Everything we see
must be a path.
Outside of a repository this doesn't matter (since we
know it won't resolve), but inside one, we may complain
unnecessarily if a filename happens to also match a
refname.
This patch skips the get_sha1() call entirely in the
no-index case, and behaves as if it failed (with the
exception of giving a better error message).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we see "git grep pattern rev -- file" then we apply the
usual rev/pathspec disambiguation rules: any "rev" before
the "--" must be a revision, and we do not need to apply the
verify_non_filename() check.
But there are two bugs here:
1. We keep a seen_dashdash flag to handle this case, but
we set it in the same left-to-right pass over the
arguments in which we parse "rev".
So when we see "rev", we do not yet know that there is
a "--", and we mistakenly complain if there is a
matching file.
We can fix this by making a preliminary pass over the
arguments to find the "--", and only then checking the rev
arguments.
2. If we can't resolve "rev" but there isn't a dashdash,
that's OK. We treat it like a path, and complain later
if it doesn't exist.
But if there _is_ a dashdash, then we know it must be a
rev, and should treat it as such, complaining if it
does not resolve. The current code instead ignores it
and tries to treat it like a path.
This patch fixes both bugs, and tries to comment the parsing
flow a bit better.
It adds tests that cover the two bugs, but also some related
situations (which already worked, but this confirms that our
fixes did not break anything).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a command of the form
git grep --no-index pattern -- path
in the absence of a Git repository, an error message will be printed:
fatal: BUG: setup_git_env called without repository
This is because "git grep" tries to interpret "--" as a rev. "git grep"
has always tried to first interpret "--" as a rev for at least a few
years, but this issue was upgraded from a pessimization to a bug in
commit 59332d1 ("Resurrect "git grep --no-index"", 2010-02-06), which
calls get_sha1 regardless of whether --no-index was specified. This bug
appeared to be benign until commit b1ef400 ("setup_git_env: avoid blind
fall-back to ".git"", 2016-10-20) when Git was taught to die in this
situation. (This "git grep" bug appears to be one of the bugs that
commit b1ef400 is meant to flush out.)
Therefore, always interpret "--" as signaling the end of options,
instead of trying to interpret it as a rev first.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A server can end up in a state where there are lots of unreferenced
loose objects (say, because many users are doing a bunch of rebasing
and pushing their rebased branches). Running "git gc --auto" in
this state would cause a gc.log file to be created, preventing
future auto gcs, causing pack files to pile up. Since many git
operations are O(n) in the number of pack files, this would lead to
poor performance.
Git should never get itself into a state where it refuses to do any
maintenance, just because at some point some piece of the maintenance
didn't make progress.
Teach Git to ignore gc.log files which are older than (by default)
one day old, which can be tweaked via the gc.logExpiry configuration
variable. That way, these pack files will get cleaned up, if
necessary, at least once per day. And operators who find a need for
more-frequent gcs can adjust gc.logExpiry to meet their needs.
There is also some cleanup: a successful manual gc, or a
warning-free auto gc with an old log file, will remove any old
gc.log files.
It might still happen that manual intervention is required
(e.g. because the repo is corrupt), but at the very least it won't
be because Git is too dumb to try again.
Signed-off-by: David Turner <dturner@twosigma.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a9e38359e3 we taught git-p4 a way to re-encode path names from what
was used in Perforce to UTF-8. This path re-encoding worked properly for
"added" paths. "Removed" paths were not re-encoded and therefore
different from the "added" paths. Consequently, these files were not
removed in a git-p4 cloned Git repository because the path names did not
match.
Fix this by moving the re-encoding to a place that affects "added" and
"removed" paths. Add a test to demonstrate the issue.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of erroring out and telling the user that they should add a
positive pattern that covers everything else, just _do_ that.
For commands where we honor the current cwd by default (ie grep, ls-files
etc), we make that default positive pathspec be the current working
directory. And for commands that default to the whole project (ie diff,
log, etc), the default positive pathspec is the whole project.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --graph" did not work well with "--name-only", even though
other forms of "diff" output were handled correctly.
* jk/log-graph-name-only:
diff: print line prefix for --name-only output
Adjust a perf test to new world order where commands that do
require a repository are really strict about having a repository.
* rs/p5302-create-repositories-before-tests:
p5302: create repositories for index-pack results explicitly
Now that the sequencer learned to process a "normal" interactive rebase,
we use it. The original shell script is still used for "non-normal"
interactive rebases, i.e. when --root or --preserve-merges was passed.
Please note that the --root option (via the $squash_onto variable) needs
special handling only for the very first command, hence it is still okay
to use the helper upon continue/skip.
Also please note that the --no-ff setting is volatile, i.e. when the
interactive rebase is interrupted at any stage, there is no record of
it. Therefore, we have to pass it from the shell script to the
rebase--helper.
Note: the test t3404 had to be adjusted because the the error messages
produced by the sequencer comply with our current convention to start with
a lower-case letter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using non-builtin protocols relying on a transport helper
(such as http), push options are not propagated to the helper.
The user could ask for push options and a push would seemingly succeed,
but the push options would never be transported to the server,
misleading the users expectation.
Fix this by propagating the push options to the transport helper.
This is only addressing the first issue of
(1) the helper protocol does not propagate push-option
(2) the http helper is not prepared to handle push-option
Once we fix (2), the http transport helper can make use of push options
as well, but that happens as a follow up. (1) is a bug fix, whereas (2)
is a feature, which is why we only do (1) here.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When tags are created with `--create-reflog` or with the option
`core.logAllRefUpdates` set to 'always', a reflog is created for them.
So far, the description of reflog entries for tags was empty, making the
reflog hard to understand. For example:
6e3a7b3 refs/tags/test@{0}:
Now, a reflog message is generated when creating a tag, following the
pattern "tag: tagging <short-sha1> (<description>)". If
GIT_REFLOG_ACTION is set, the message becomes "$GIT_REFLOG_ACTION
(<description>)" instead. If the tag references a commit object, the
description is set to the subject line of the commit, followed by its
commit date. For example:
6e3a7b3 refs/tags/test@{0}: tag: tagging 6e3a7b3398 (Git 2.12-rc0, 2017-02-03)
If the tag points to a tree/blob/tag objects, the following static
strings are taken as description:
- "tree object"
- "blob object"
- "other tag object"
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We de-duplicate ".have" refs among themselves, but never
check if they are duplicates of our local refs. It's not
unreasonable that they would be if we are a "--shared" or
"--reference" clone of a similar repository; we'd have all
the same tags.
We can handle this by inserting our local refs into the
oidset, but obviously not suppressing duplicates (since the
refnames are important).
Note that this also switches the order in which we advertise
refs, processing ours first and then any alternates. The
order shouldn't matter (and arguably showing our refs first
makes more sense).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run "git log --graph --name-only", the pathnames are
not indented to go along with their matching commits (unlike
all of the other diff formats). We need to output the line
prefix for each item before writing it.
The tests cover both --name-status and --name-only. The
former actually gets this right already, because it builds
on the --raw format functions. It's only --name-only which
uses its own code (and this fix mirrors the code in
diff_flush_raw()).
Note that the tests don't follow our usual style of setting
up the "expect" output inside the test block. This matches
the surrounding style, but more importantly it is easier to
read: we don't have to worry about embedded single-quotes,
and the leading indentation is more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make t7800 easier to debug by capturing output into temporary files and
using test_line_count to make assertions on those files.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "test_line_count" instead of "wc -l", use "git -C" instead of a
subshell, and use test_expect_code when calling difftool. Ease
debugging by capturing output into temporary files.
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We forgot that "strip" was introduced at 0571979bd6 ("tag: do not
show ambiguous tag names as "tags/foo"", 2016-01-25) as part of Git
2.8 (and 2.7.1) when we started calling this "lstrip" to make it
easier to explain the new "rstrip" operation.
We shouldn't have renamed the existing one; "lstrip" should have
been a new synonym that means the same thing as "strip". Scripts
in the wild are surely using the original form already.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before 7176a314 (index-pack: complain when --stdin is used outside of a
repo) index-pack silently created a non-existing target directory; now
the command refuses to work unless it's used against a valid repository.
That causes p5302 to fail, which relies on the former behavior. Fix it
by setting up the destinations for its performance tests using git init.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git difftool -h" reports an error:
fatal: BUG: setup_git_env called without repository
Defer repository setup so that the help option processing happens before
the repository is initialized.
Add tests to ensure that the basic usage works inside and outside of a
repository.
Signed-off-by: David Aguilar <davvid@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the previous changes in this series there are only a handful of
$(__gitdir) command substitutions left in the completion script, but
there is still a bit of room for improvements:
1. The command substitution involves the forking of a subshell,
which has considerable overhead on some platforms.
2. There are a few cases, where this command substitution is
executed more than once during a single completion, which means
multiple subshells and possibly multiple 'git rev-parse'
executions. __gitdir() is invoked twice while completing refs
for e.g. 'git log', 'git rebase', 'gitk', or while completing
remote refs for 'git fetch' or 'git push'.
Both of these points can be addressed by using the
__git_find_repo_path() helper function introduced in the previous
commit:
1. __git_find_repo_path() stores the path to the repository in a
variable instead of printing it, so the command substitution
around the function can be avoided. Or rather: the command
substitution should be avoided to make the new value of the
variable set inside the function visible to the callers.
(Yes, there is now a command substitution inside
__git_find_repo_path() around each 'git rev-parse', but that's
executed only if necessary, and only once per completion, see
point 2. below.)
2. $__git_repo_path, the variable holding the path to the
repository, is declared local in the toplevel completion
functions __git_main() and __gitk_main(). Thus, once set, the
path is visible in all completion functions, including all
subsequent calls to __git_find_repo_path(), meaning that they
wouldn't have to re-discover the path to the repository.
So call __git_find_repo_path() and use $__git_repo_path instead of the
$(__gitdir) command substitution to access paths in the .git
directory. Turn tests checking __gitdir()'s repository discovery into
tests of __git_find_repo_path() such that only the tested function
changes but the expected results don't, ensuring that repo discovery
keeps working as it did before.
As __gitdir() is not used anymore in the completion script, mark it as
deprecated and direct users' attention to __git_find_repo_path() and
$__git_repo_path. Yet keep four __gitdir() tests to ensure that it
handles success and failure of __git_find_repo_path() and that it
still handles its optional remote argument, because users' custom
completion scriptlets might depend on it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To prepare for caching the path to the repository in the following
commit, extract the repository discovering part of __gitdir() into the
__git_find_repo_path() helper function, which stores the found path in
the $__git_repo_path variable instead of printing it. Make __gitdir()
a wrapper around this new function. Declare $__git_repo_path local in
the toplevel completion functions __git_main() and __gitk_main() to
ensure that it never leaks into the environment and influences
subsequent completions (though this isn't necessary right now, as
__gitdir() is still only executed in subshells, but will matter for
the following commit).
Adjust tests checking __gitdir() or any other completion function
calling __gitdir() to perform those checks in a subshell to prevent
$__git_repo_path from leaking into the test environment. Otherwise
leave the tests unchanged to demonstrate that this change doesn't
alter __gitdir()'s behavior.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git -C <path>' option(s) on the command line should be taken into
account during completion, because
- like '--git-dir=<path>', it can lead us to a different repository,
- a few git commands executed in the completion script do care about
in which directory they are executed, and
- the command for which we are providing completion might care about
in which directory it will be executed.
However, unlike '--git-dir=<path>', the '-C <path>' option can be
specified multiple times and their effect is cumulative, so we can't
just store a single '<path>' in a variable. Nor can we simply
concatenate a path from '-C <path1> -C <path2> ...', because e.g. (in
an arguably pathological corner case) a relative path might be
followed by an absolute path.
Instead, store all '-C <path>' options word by word in the
$__git_C_args array in the main git completion function, and pass this
array, if present, to 'git rev-parse --absolute-git-dir' when
discovering the repository in __gitdir(), and let it take care of
multiple options, relative paths, absolute paths and everything.
Also pass all '-C <path> options via the $__git_C_args array to those
git executions which require a worktree and for which it matters from
which directory they are executed from. There are only three such
cases:
- 'git diff-index' and 'git ls-files' in __git_ls_files_helper()
used for git-aware filename completion, and
- the 'git ls-tree' used for completing the 'ref:path' notation.
The other git commands executed in the completion script don't need
these '-C <path>' options, because __gitdir() already took those
options into account. It would not hurt them, either, but let's not
induce unnecessary code churn.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of 'git rev-parse --git-dir' can be either a relative or an
absolute path, depending on whether the current working directory is
at the top of the worktree or the .git directory or not, or how the
path to the repository is specified via the '--git-dir=<path>' option
or the $GIT_DIR environment variable. And if that output is a
relative path, then it is relative to the directory where any 'git
-C <path>' options might have led us.
This doesn't matter at all for regular scripts, because the git
wrapper automatically takes care of changing directories according to
the '-C <path>' options, and the scripts can then simply follow any
path returned by 'git rev-parse --git-dir', even if it's a relative
path.
Our Bash completion script, however, is unique in that it must run
directly in the user's interactive shell environment. This means that
it's not executed through the git wrapper and would have to take care
of any '-C <path> options on its own, and it can't just change
directories as it pleases. Consequently, adding support for taking
any '-C <path>' options on the command line into account during
completion turned out to be considerably more difficult, error prone
and required more subshells and git processes when it had to cope with
a relative path to the .git directory.
Help this rather special use case and teach 'git rev-parse' a new
'--absolute-git-dir' option which always outputs a canonicalized
absolute path to the .git directory, regardless of whether the path is
discovered automatically or is specified via $GIT_DIR or 'git
--git-dir=<path>'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main completion function finds the name of the git command by
iterating through all the words on the command line in search for the
first non-option-looking word. As it is not aware of 'git -C's
mandatory path argument, if the '-C <path>' option is present, 'path'
will be the first such word and it will be mistaken for a git command.
This breaks completion in various ways:
- If 'path' happens to match one of the commands supported by the
completion script, then options of that command will be offered.
- If 'path' doesn't match a supported command and doesn't contain any
characters not allowed in Bash identifier names, then the
completion script does basically nothing and Bash in turn falls
back to filename completion for all subsequent words.
- Otherwise, if 'path' does contain such an unallowed character, then
it leads to a more or less ugly error message in the middle of the
command line. The standard '/' directory separator is such a
character, and it happens to trigger one of the uglier errors:
$ git -C some/path <TAB>sh.exe": declare: `_git_some/path': not a valid identifier
error: invalid key: alias.some/path
Fix this by skipping 'git -C's mandatory path argument while iterating
over the words on the command line. Extend the relevant test with
this case and, while at it, with cases that needed similar treatment
in the past ('--git-dir', '-c', '--work-tree' and '--namespace').
Additionally, silence the standard error of the 'declare' builtins
looking for the completion function associated with the git command
and of the 'git config' query for the aliased command. So if git ever
learns a new option with a mandatory argument in the future, then,
though the completion script will again misbehave, at least the
command line will not be utterly disrupted by those error messages.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e832f5c096 (completion: avoid ls-remote in certain scenarios,
2013-05-28) turned a 'git ls-remote <remote>' query into a 'git
for-each-ref refs/remotes/<remote>/' to improve responsiveness of
remote refs completion by avoiding potential network communication.
However, it inadvertently made impossible to complete short refs from
a remote given as a URL, e.g. 'git fetch git://server.com/repo.git
<TAB>', because there is, of course, no such thing as
'refs/remotes/git://server.com/repo.git'.
Since the previous commit we tell apart configured remotes, i.e. those
that can have a hierarchy under 'refs/remotes/', from others that
don't, including remotes given as URL, so we know when we can't use
the faster 'git for-each-ref'-based approach.
Resurrect the old, pre-e832f5c09680 'git ls-remote'-based code for the
latter case to support listing short refs from remotes given as a URL.
The code is slightly updated from the original to
- take into account the path to the repository given on the command
line (if any), and
- omit 'ORIG_HEAD' from the query, as 'git ls-remote' will never
list it anyway.
When the remote given to __git_refs() doesn't exist, then it will be
handled by this resurrected 'git ls-remote' query. This code path
doesn't list 'HEAD' unconditionally, which has the nice side effect of
fixing two more expected test failures.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When refs completion is attempted while not in a git repository, the
completion script offers 'HEAD' erroneously.
Check early in __git_refs() that there is either a repository or a
remote to work on, and return early if neither is given.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the remote given to __git_refs() happens to match both the name of
a configured remote and the name of a directory in the current working
directory, then that directory is assumed to be a git repository, and
listing refs from that directory will be attempted. This is wrong,
because in such a situation git commands (e.g. 'git fetch|pull|push
<remote>' whom these refs will eventually be passed to) give
precedence to the configured remote. Therefore, __git_refs() should
list refs from the configured remote as well.
Add the helper function __git_is_configured_remote() that checks
whether its argument matches the name of a configured remote. Use
this helper to decide how to handle the remote passed to __git_refs().
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In __git_refs() the git commands listing refs, both short and full,
from a given remote repository are run without giving them the path to
the git repository which might have been specified on the command line
via 'git --git-dir=<path>'. This is bad, those git commands should
access the 'refs/remotes/<remote>/' hierarchy or the remote and
credentials configuration in that specified repository.
Use the __gitdir() helper only to find the path to the .git directory
and pass the resulting path to the 'git ls-remote' and 'for-each-ref'
executions that list remote refs. While modifying that 'for-each-ref'
line, remove the superfluous disambiguating doubledash.
Don't use __gitdir() to check that the given remote is on the file
system: basically it performs only a single if statement for us at the
considerable cost of fork()ing a subshell for a command substitution.
We are better off to perform all the necessary checks of the remote in
__git_refs().
Though __git_refs() was the last remaining callsite that passed a
remote to __gitdir(), don't delete __gitdir()'s remote-handling part
yet, just in case some users' custom completion scriptlets depend on
it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __gitdir() helper function prints the path to the git repository
to its stdout or stays silent and returns with error when it can't
find a repository or when the repository given via $GIT_DIR doesn't
exist.
This is not the case, however, when the path in $__git_dir, i.e. the
path to the repository specified on the command line via 'git
--git-dir=<path>', doesn't exist: __gitdir() still outputs it as if it
were a real existing repository, making some completion functions
believe that they operate on an existing repository.
Check that the path in $__git_dir exists and return with error without
printing anything to stdout if it doesn't.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check how __git_refs() lists refs in different scenarios, i.e.
- short and full refs,
- from a local or from a remote repository,
- remote specified via path, name or URL,
- with or without a repository specified on the command line,
- non-existing remote,
- unique remote branches for 'git checkout's tracking DWIMery,
- not in a git repository, and
- interesting combinations of the above.
Seven of these tests expect failure, mostly demonstrating bugs related
to listing refs from a remote repository:
- ignoring the repository specified on the command line (2 tests),
- listing refs from the wrong place when the name of a configured
remote happens to match a directory,
- listing only 'HEAD' but no short refs from a remote given as URL,
- listing 'HEAD' even from non-existing remotes (2 tests), and
- listing 'HEAD' when not in a repository.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __gitdir() helper function shouldn't output anything if not in a
git repository. The relevant tests only checked its error code, so
extend them to ensure that there's no output.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests of the __gitdir() helper function use the $TRASH_DIRECTORY
variable in direct path comparisons. In general this should be
avoided, because it might contain symbolic links. There happens to be
no issues with this here, however, because those tests use
$TRASH_DIRECTORY both for specifying the expected result and for
specifying input which in turn is just 'echo'ed verbatim.
Other __gitdir() tests ask for the path of the trash directory by
running $(pwd -P) in each test, sometimes even twice in a single test.
Run $(pwd) only once at the beginning of the test script to store the
path of the trash directory in a variable, and use that variable in
all __gitdir() tests.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test helper functions test_gitcomp() and test_gitcomp_nl() leak
the $cur variable into the test environment. Since this variable has
a special role in the Bash completion script (it holds the word
currently being completed) it influences the behavior of most
completion functions and thus this leakage could interfere with
subsequent tests. Although there are no such issues in the current
tests, early versions of the new tests that will be added later in
this series suffered because of this.
It's better to play safe and declare $cur local in those test helper
functions. 'local' is bashism, of course, but the tests of the Bash
completion script are run under Bash anyway, and there are already
other variables declared local in this test script.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While preparing commits, three tests added newly created files to the
index using 'git add .', which added not only the files in question
but leftover test cruft from previous tests like the files 'expected'
and 'actual' as well. Luckily, this had no effect on the tests'
correctness.
Add only the files we are actually interested in.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "core.logAllRefUpdates" that used to be boolean has been
enhanced to take 'always' as well, to record ref updates to refs
other than the ones that are expected to be updated (i.e. branches,
remote-tracking branches and notes).
* cw/log-updates-for-all-refs-really:
doc: add note about ignoring '--no-create-reflog'
update-ref: add test cases for bare repository
refs: add option core.logAllRefUpdates = always
config: add markup to core.logAllRefUpdates doc
"make -C t failed" will now run only the tests that failed in the
previous run. This is usable only when prove is not use, and gives
a useless error message when run after "make clean", but otherwise
is serviceable.
* js/re-running-failed-tests:
t/Makefile: add a rule to re-run previously-failed tests
The user can specify a custom update method that is run when
"submodule update" updates an already checked out submodule. This
was ignored when checking the submodule out for the first time and
we instead always just checked out the commit that is bound to the
path in the superproject's index.
* sb/submodule-update-initial-runs-custom-script:
submodule update: run custom update script for initial populating as well
When a submodule "A", which has another submodule "B" nested within
it, is "absorbed" into the top-level superproject, the inner
submodule "B" used to be left in a strange state. The logic to
adjust the .git pointers in these submodules has been corrected.
* sb/submodule-recursive-absorb:
submodule absorbing: fix worktree/gitdir pointers recursively for non-moves
cache.h: expose the dying procedure for reading gitlinks
setup: add gentle version of resolve_git_dir
"git read-tree" and its underlying unpack_trees() machinery learned
to report problematic paths prefixed with the --super-prefix option.
* sb/unpack-trees-super-prefix:
unpack-trees: support super-prefix option
t1001: modernize style
t1000: modernize style
read-tree: use OPT_BOOL instead of OPT_SET_INT
Some people feel the default set of colors used by "git log --graph"
rather limiting. A mechanism to customize the set of colors has
been introduced.
* nd/log-graph-configurable-colors:
document behavior of empty color name
color_parse_mem: allow empty color spec
log --graph: customize the graph lines with config log.graphColors
color.c: trim leading spaces in color_parse_mem()
color.c: fix color_parse_mem() with value_len == 0
Test tweaks for those who have default ACL in their git source tree
that interfere with the umask test.
* mm/reset-facl-before-umask-test:
t0001: don't let a default ACL interfere with the umask test
Test tweak for FreeBSD where /usr/bin/unzip is unsuitable to run
our tests but /usr/local/bin/unzip is usable.
* js/unzip-in-usr-bin-workaround:
test-lib: on FreeBSD, look for unzip(1) in /usr/local/bin/
After starting "git rebase -i", which first opens the user's editor
to edit the series of patches to apply, but before saving the
contents of that file, "git status" failed to show the current
state (i.e. you are in an interactive rebase session, but you have
applied no steps yet) correctly.
* js/status-pre-rebase-i:
status: be prepared for not-yet-started interactive rebase
"git submodule add" used to be confused and refused to add a
locally created repository; users can now use "--force" option
to add them.
* sb/submodule-add-force:
submodule add: extend force flag to add existing repos
Full pattern must be quoted. So 'pat"t"ern attr' will give exactly
'pat"t"ern', not 'pattern'. Also clarify that leading whitespaces are
not part of the pattern and document comment syntax.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The URL matching function computes for two URLs whether they match not.
The match is performed by splitting up the URL into different parts and
then doing an exact comparison with the to-be-matched URL.
The main user of `urlmatch` is the configuration subsystem. It allows to
set certain configurations based on the URL which is being connected to
via keys like `http.<url>.*`. A common use case for this is to set
proxies for only some remotes which match the given URL. Unfortunately,
having exact matches for all parts of the URL can become quite tedious
in some setups. Imagine for example a corporate network where there are
dozens or even hundreds of subdomains, which would have to be configured
individually.
Allow users to write an asterisk '*' in place of any 'host' or
'subdomain' label as part of the host name. For example,
"http.https://*.example.com.proxy" sets "http.proxy" for all direct
subdomains of "https://example.com", e.g. "https://foo.example.com", but
not "https://foo.bar.example.com".
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to be able to rank positive matches by `urlmatch`, we inspect
the path length and user part to decide whether a match is better than
another match. As all other parts are matched exactly between both URLs,
this is the correct thing to do right now.
In the future, though, we want to introduce wild cards for the domain
part. When doing this, it does not make sense anymore to only compare
the path lengths. Instead, we also want to compare the domain lengths to
determine which of both URLs matches the host part more closely.
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This environment variable and configuration value allow to
override the autodetection of plink/tortoiseplink in case that
Git gets it wrong.
[jes: wrapped overly-long lines, factored out and changed
get_ssh_variant() to handle_ssh_variant() to accomodate the
change from the putty/tortoiseplink variables to
port_option/needs_batch, adjusted the documentation, free()d
value obtained from the config.]
Signed-off-by: Segev Finer <segev208@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to c2f41bf52 (color.c: fix color_parse_mem() with
value_len == 0, 2017-01-19), the empty string was
interpreted as a color "reset". This was an accidental
outcome, and that commit turned it into an error.
However, scripts may pass the empty string as a default
value to "git config --get-color" to disable color when the
value is not defined. The git-add--interactive script does
this. As a result, the script is unusable since c2f41bf52
unless you have color.diff.plain defined (if it is defined,
then we don't parse the empty default at all).
Our test scripts didn't notice the recent breakage because
they run without a terminal, and thus without color. They
never hit this code path at all. And nobody noticed the
original buggy "reset" behavior, because it was effectively
a noop.
Let's fix the code to have an empty color name produce an
empty sequence of color codes. The tests need a few fixups:
- we'll add a new test in t4026 to cover this case. But
note that we need to tweak the color() helper. While
we're there, let's factor out the literal ANSI ESC
character. Otherwise it makes the diff quite hard to
read.
- we'll add a basic sanity-check in t4026 that "git add
-p" works at all when color is enabled. That would have
caught this bug, as well as any others that are specific
to the color code paths.
- 73c727d69 (log --graph: customize the graph lines with
config log.graphColors, 2017-01-19) added a test to
t4202 that checks some "invalid" graph color config.
Since ",, blue" before yielded only "blue" as valid, and
now yields "empty, empty, blue", we don't match the
expected output.
One way to fix this would be to change the expectation
to the empty color strings. But that makes the test much
less interesting, since we show only two graph lines,
both of which would be colorless.
Since the empty-string case is now covered by t4026,
let's remove them entirely here. They're just in the way
of the primary thing the test is supposed to be
checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tighten a test to avoid mistaking an extended ERE regexp engine as
a PRE regexp engine.
* jk/grep-e-could-be-extended-beyond-posix:
t7810: avoid assumption about invalid regex syntax
"git <cmd> @{push}" on a detached HEAD used to segfault; it has
been corrected to error out with a message.
* km/branch-get-push-while-detached:
branch_get_push: do not segfault when HEAD is detached
"git blame --porcelain" misidentified the "previous" <commit, path>
pair (aka "source") when contents came from two or more files.
* jk/blame-fixes:
blame: output porcelain "previous" header for each file
blame: handle --no-abbrev
blame: fix alignment with --abbrev=40
"git archive" did not read the standard configuration files, and
failed to notice a file that is marked as binary via the userdiff
driver configuration.
* jk/archive-zip-userdiff-config:
archive-zip: load userdiff config
It is natural that "git gc --auto" may not attempt to pack
everything into a single pack, and there is no point in warning
when the user has configured the system to use the pack bitmap,
leading to disabling further "gc".
* dt/disable-bitmap-in-auto-gc:
repack: die on incremental + write-bitmap-index
auto gc: don't write bitmaps for incremental repacks
"git fast-import" sometimes mishandled while rebalancing notes
tree, which has been fixed.
* mh/fast-import-notes-fix-new:
fast-import: properly fanout notes when tree is imported
Compression setting for producing packfiles were spread across
three codepaths, one of which did not honor any configuration.
Unify these so that all of them honor core.compression and
pack.compression variables the same way.
* jc/compression-config:
compression: unify pack.compression configuration parsing
"git fsck --connectivity-check" was not working at all.
* jk/fsck-connectivity-check-fix:
fsck: lazily load types under --connectivity-only
fsck: move typename() printing to its own function
t1450: use "mv -f" within loose object directory
fsck: check HAS_OBJ more consistently
fsck: do not fallback "git fsck <bogus>" to "git fsck"
fsck: tighten error-checks of "git fsck <head>"
fsck: prepare dummy objects for --connectivity-check
fsck: report trees as dangling
t1450: clean up sub-objects in duplicate-entry test
Rewrite a scripted porcelain "git difftool" in C.
* js/difftool-builtin:
difftool: hack around -Wzero-length-format warning
difftool: retire the scripted version
difftool: implement the functionality in the builtin
difftool: add a skeleton for the upcoming builtin
A few codepaths had to rely on a global variable when sorting
elements of an array because sort(3) API does not allow extra data
to be passed to the comparison function. Use qsort_s() when
natively available, and a fallback implementation of it when not,
to eliminate the need, which is a prerequisite for making the
codepath reentrant.
* rs/qsort-s:
ref-filter: use QSORT_S in ref_array_sort()
string-list: use QSORT_S in string_list_sort()
perf: add basic sort performance test
add QSORT_S
compat: add qsort_s()
"git show-ref HEAD" used with "--verify" because the user is not
interested in seeing refs/remotes/origin/HEAD, and used with
"--head" because the user does not want HEAD to be filtered out,
i.e. "git show-ref --head --verify HEAD", did not work as expected.
* vp/show-ref-verify-head:
show-ref: remove a stale comment
show-ref: remove dead `if (verify)' check
show-ref: detect dangling refs under --verify as well
show-ref: move --quiet handling into show_one()
show-ref: allow -d to work with --verify
show-ref: accept HEAD with --verify
With anticipatory tweaking for remotes defined in ~/.gitconfig
(e.g. "remote.origin.prune" set to true, even though there may or
may not actually be "origin" remote defined in a particular Git
repository), "git remote rename" and other commands misinterpreted
and behaved as if such a non-existing remote actually existed.
* js/remote-rename-with-half-configured-remote:
remote rename: more carefully determine whether a remote is configured
remote rename: demonstrate a bogus "remote exists" bug
"git tag" and "git verify-tag" learned to put GPG verification
status in their "--format=<placeholders>" output format.
* st/verify-tag:
t/t7004-tag: Add --format specifier tests
t/t7030-verify-tag: Add --format specifier tests
builtin/tag: add --format argument for tag -v
builtin/verify-tag: add --format to verify-tag
ref-filter: add function to print single ref_array_item
gpg-interface, tag: add GPG_VERIFY_OMIT_STATUS flag
The sequencer machinery has been further enhanced so that a later
set of patches can start using it to reimplement "rebase -i".
* js/sequencer-i-countdown-3: (38 commits)
sequencer (rebase -i): write out the final message
sequencer (rebase -i): write the progress into files
sequencer (rebase -i): show the progress
sequencer (rebase -i): suggest --edit-todo upon unknown command
sequencer (rebase -i): show only failed cherry-picks' output
sequencer (rebase -i): show only failed `git commit`'s output
sequencer: use run_command() directly
sequencer: update reading author-script
sequencer (rebase -i): differentiate between comments and 'noop'
sequencer (rebase -i): implement the 'drop' command
sequencer (rebase -i): allow rescheduling commands
sequencer (rebase -i): respect strategy/strategy_opts settings
sequencer (rebase -i): respect the rebase.autostash setting
sequencer (rebase -i): run the post-rewrite hook, if needed
sequencer (rebase -i): record interrupted commits in rewritten, too
sequencer (rebase -i): copy commit notes at end
sequencer (rebase -i): set the reflog message consistently
sequencer (rebase -i): refactor setting the reflog message
sequencer (rebase -i): allow fast-forwarding for edit/reword
sequencer (rebase -i): implement the 'reword' command
...
"git submodule push" learned "--recurse-submodules=only option to
push submodules out without pushing the top-level superproject.
* bw/push-submodule-only:
push: add option to push only submodules
submodules: add RECURSE_SUBMODULES_ONLY value
transport: reformat flag #defines to be more readable
Implement the '--format' option provided by 'ref-filter'. This lets the
user list branches as per desired format similar to the implementation
in 'git for-each-ref'.
Add tests and documentation for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Port branch.c to use ref-filter APIs for printing. This clears out
most of the code used in branch.c for printing and replaces them with
calls made to the ref-filter library.
Introduce build_format() which gets the format required for printing
of refs. Make amendments to print_ref_list() to reflect these changes.
The strings included in build_format() may not be safely quoted for
inclusion (i.e. it might contain '%' which needs to be escaped with an
additional '%'). Introduce quote_literal_for_format() as a helper
function which takes a string and returns a version of the string that
is safely quoted to be used in the for-each-ref format which is built
in build_format().
Change calc_maxwidth() to also account for the length of HEAD ref, by
calling ref-filter:get_head_discription().
Also change the test in t6040 to reflect the changes.
Before this patch, all cross-prefix symrefs weren't shortened. Since
we're using ref-filter APIs, we shorten all symrefs by default. We also
allow the user to change the format if needed with the introduction of
the '--format' option in the next patch.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complimenting the existing 'lstrip=<N>' option, add an 'rstrip=<N>'
option which strips `<N>` slash-separated path components from the end
of the refname (e.g., `%(refname:rstrip=2)` turns `refs/tags/foo` into
`refs`).
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the 'lstrip=<N>' option only takes a positive value '<N>'
and strips '<N>' slash-separated path components from the left. Modify
the 'lstrip' option to also take a negative number '<N>' which would
strip from the left as necessary and _leave_ behind only 'N'
slash-separated path components from the right-most end.
For e.g. %(refname:lstrip=-1) would make 'foo/goo/abc' into 'abc'.
Add documentation and tests for the same.
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default behavior of update-ref to create reflogs differs in
repositories with worktree and bare ones. The existing tests cover only
the behavior of repositories with worktree.
This commit adds tests that assert the correct behavior in bare
repositories for update-ref. Two cases are covered:
- If core.logAllRefUpdates is not set, no reflogs should be created
- If core.logAllRefUpdates is true, reflogs should be created
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.logallrefupdates is true, we only create a new reflog for refs
that are under certain well-known hierarchies. The reason is that we
know that some hierarchies (like refs/tags) are not meant to change, and
that unknown hierarchies might not want reflogs at all (e.g., a
hypothetical refs/foo might be meant to change often and drop old
history immediately).
However, sometimes it is useful to override this decision and simply log
for all refs, because the safety and audit trail is more important than
the performance implications of keeping the log around.
This patch introduces a new "always" mode for the core.logallrefupdates
option which will log updates to everything under refs/, regardless
where in the hierarchy it is (we still will not log things like
ORIG_HEAD and FETCH_HEAD, which are known to be transient).
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current message printed by "git merge-recursive" for a rename/delete
conflict is like this:
CONFLICT (rename/delete): new-path deleted in HEAD and renamed in
other-branch. Version other-branch of new-path left in tree.
To be more helpful, the message should show both paths of the rename and
state that the deletion occurred at the old path, not the new path. So
change the message to the following format:
CONFLICT (rename/delete): old-path deleted in HEAD and renamed to
new-path in other-branch. Version other-branch of new-path left in tree.
Since this doubles the number of cases in handle_change_delete (modify vs.
rename), refactor the code to halve the number of cases again by merging the
cases where o->branch1 has the change and o->branch2 has the delete with the
cases that are the other way around.
Also add a simple test of the new conflict message.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "init creates a new deep directory (umask vs. shared)" test expects
the permissions of newly created files to be based on the umask, which
fails if a default ACL is inherited from the working tree for git. So
attempt to remove a default ACL if there is one. Same idea as
8ed0a740dd. (I guess I'm the only one who
ever runs the test suite with a default ACL set.)
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 898b14c (pack-objects: rework check_delta_limit usage,
2007-04-16), we check the delta depth limit only when
figuring out whether we should make a new delta. We don't
consider it at all when reusing deltas, which means that
packing once with --depth=250, and then again with
--depth=50, the second pack may still contain chains larger
than 50.
This is generally considered a feature, as the results of
earlier high-depth repacks are carried forward, used for
serving fetches, etc. However, since we started using
cross-pack deltas in c9af708b1 (pack-objects: use mru list
when iterating over packs, 2016-08-11), we are no longer
bounded by the length of an existing delta chain in a single
pack.
Here's one particular pathological case: a sequence of N
packs, each with 2 objects, the base of which is stored as a
delta in a previous pack. If we chain all the deltas
together, we have a cycle of length N. We break the cycle,
but the tip delta is still at depth N-1.
This is less unlikely than it might sound. See the included
test for a reconstruction based on real-world actions. I
ran into such a case in the wild, where a client was rapidly
sending packs, and we had accumulated 10,000 before doing a
server-side repack. The pack that "git repack" tried to
generate had a very deep chain, which caused pack-objects to
run out of stack space in the recursive write_one().
This patch bounds the length of delta chains in the output
pack based on --depth, regardless of whether they are caused
by cross-pack deltas or existed in the input packs. This
fixes the problem, but does have two possible downsides:
1. High-depth aggressive repacks followed by "normal"
repacks will throw away the high-depth chains.
In the long run this is probably OK; investigation
showed that high-depth repacks aren't actually
beneficial, and we dropped the aggressive depth default
to match the normal case in 07e7dbf0d (gc: default
aggressive depth to 50, 2016-08-11).
2. If you really do want to store high-depth deltas on
disk, they may be discarded and new delta computed when
serving a fetch, unless you set pack.depth to match
your high-depth size.
The implementation uses the existing search for delta
cycles. That lets us compute the depth of any node based on
the depth of its base, because we know the base is DFS_DONE
by the time we look at it (modulo any cycles in the graph,
but we know there cannot be any because we break them as we
see them).
There is some subtlety worth mentioning, though. We record
the depth of each object as we compute it. It might seem
like we could save the per-object storage space by just
keeping track of the depth of our traversal (i.e., have
break_delta_chains() report how deep it went). But we may
visit an object through multiple delta paths, and on
subsequent paths we want to know its depth immediately,
without having to walk back down to its final base (doing so
would make our graph walk quadratic rather than linear).
Likewise, one could try to record the depth not from the
base, but from our starting point (i.e., start
recursion_depth at 0, and pass "recursion_depth + 1" to each
invocation of break_delta_chains()). And then when
recursion_depth gets too big, we know that we must cut the
delta chain. But that technique is wrong if we do not visit
the nodes in topological order. In a chain A->B->C, it
if we visit "C", then "B", then "A", we will never recurse
deeper than 1 link (because we see at each node that we have
already visited it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong reported that while FreeBSD has a /usr/bin/unzip, it uses
different semantics from those that are needed by Git's tests: When
passing the -a option to Info-Zip, it heeds the text attribute of the
.zip file's central directory, while FreeBSD's unzip ignores that
attribute.
The common work-around is to install Info-Zip on FreeBSD, into
/usr/local/bin/.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
