Use the test_commit and test_path_is_missing
functions from the test library.
Also make sure that a merge which fails due to
pre-merge checks aborts properly and does not
leave MERGE_HEAD behind.
The "will not overwrite removed file" test is an
exception to this. It notices the untracked file
at a stage where the merge is already well under
way. Therefore we cannot abort the merge without
major restructuring. See the following thread for
more details.
http://mid.gmane.org/7vskopwxej.fsf@gitster.siamese.dyndns.org
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tc/http-urls-ends-with-slash:
http-fetch: rework url handling
http-push: add trailing slash at arg-parse time, instead of later on
http-push: check path length before using it
http-push: Normalise directory names when pushing to some WebDAV servers
http-backend: use end_url_with_slash()
url: add str wrapper for end_url_with_slash()
shift end_url_with_slash() from http.[ch] to url.[ch]
t5550-http-fetch: add test for http-fetch
t5550-http-fetch: add missing '&&'
* gc/http-with-non-ascii-username-url:
Fix username and password extraction from HTTP URLs
t5550: test HTTP authentication and userinfo decoding
Conflicts:
t/lib-httpd/apache.conf
* mg/maint-tag-rfc1991:
tag: recognize rfc1991 signatures
tag: factor out sig detection for tag display
tag: factor out sig detection for body edits
verify-tag: factor out signature detection
t/t7004-tag: test handling of rfc1991 signatures
* jm/mailmap:
t4203: do not let "git shortlog" DWIM based on tty
t4203 (mailmap): stop hardcoding commit ids and dates
mailmap: fix use of freed memory
The reflog-walking mechanism is based on the regular
revision traversal. We just rewrite the parents of each
commit in fake_reflog_parent to point to the commit in the
next reflog entry instead of the real parents.
However, the regular revision traversal tries not to show
the same commit twice, and so sets the SHOWN flag on each
commit it shows. In a reflog, however, we may want to see
the same commit more than once if it appears in the reflog
multiple times (which easily happens, for example, if you do
a reset to a prior state).
The fake_reflog_parent function takes care of this by
clearing flags, including SHOWN. Unfortunately, it does so
at the very end of the function, and it is possible to
return early from the function if there is no fake parent to
set up (e.g., because we are at the very first reflog entry
on the branch). In such a case the flag is not cleared, and
the entry is skipped by the revision traversal machinery as
already shown.
You can see this by walking the log of a ref which is set to
its very first commit more than once (the test below shows
such a situation). In this case the reflog walk will fail to
show the entry for the initial creation of the ref.
We don't want to simply move the flag-clearing to the top of
the function; we want to make sure flags set during the
fake-parent installation are also cleared. Instead, let's
hoist the flag-clearing out of the fake_reflog_parent
function entirely. It's not really about fake parents
anyway, and the only caller is the get_revision machinery.
Reported-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a non-interactive rebase of a ref fails at commit X and is aborted by
the user, the ref will be updated twice. First to point at X (with the
reflog message "rebase finished: $head_name onto $onto"), and then back
to $orig_head. It should not be updated at all.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the authentification initialisation to percent-decode username
and password for HTTP URLs.
Signed-off-by: Gabriel Corona <gabriel.corona@enst-bretagne.fr>
Acked-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for HTTP authentication and proper percent-decoding of the
userinfo (username and password) part of the URL.
Signed-off-by: Gabriel Corona <gabriel.corona@enst-bretagne.fr>
Acked-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We explicitly document "0" and "1" as synonyms for "false"
and "true" in boolean config options. However, we don't
actually handle those values in git_config_maybe_bool.
In most cases this works fine, as we call git_config_bool,
which in turn calls git_config_bool_or_int, which in turn
calls git_config_maybe_bool. Values of 0/1 are considered
"not bool", but their integer values end up being converted
to the corresponding boolean values.
However, the log.decorate code looks for maybe_bool
explicitly, so that it can fall back to the "short" and
"full" strings. It does not handle 0/1 at all, and considers
them invalid values.
We cannot simply add 0/1 support to git_config_maybe_bool.
That would confuse git_config_bool_or_int, which may want to
distinguish the integer values "0" and "1" from bools.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case HEAD does not point to a valid commit yet, merge is
implemented as a hard reset. This will cause untracked files to be
overwritten.
Instead, assume the empty tree for HEAD and do a regular merge. An
untracked file will cause the merge to abort and do nothing. If no
conflicting files are present, the merge will have the same effect
as a hard reset.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have always been creating rfc1991 signatures for users with "rfc1991"
in their gpg config but failed to recognize them (tag -l -n largenumber)
and verify them (tag -v, verify-tag).
Make good use of the refactored signature detection and let us recognize
and verify those signatures also.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git expects "-----BEGIN PGP SIGNATURE-----" at the beginning of a
signature. But gpg uses "MESSAGE" instead of "SIGNATURE" when used with
the "rfc1991" option. This leads to git's failing to verify it's own
signed tags, among other problems.
Add tests for all code paths (tag -v, tag -l -n largenumber, tag -f
without -m) where signature detection matters.
Reported-by: Stephan Hugel <urschrei@gmail.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A stat-dirty index is not a detail that ought to concern the operator
of porcelain such as "git cherry-pick".
Without this change, a cherry-pick after copying a worktree with rsync
errors out with a misleading message.
$ git cherry-pick build/top
error: Your local changes to 'file.h' would be overwritten by merge. Aborting.
Please, commit your changes or stash them before you can merge.
Noticed-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some patches have a timezone formatted like '-08:00' instead of
'-0800' in their ---/+++ lines (e.g. http://lwn.net/Articles/131729/).
Take this into account when searching for the start of the timezone
(which is the end of the filename).
This does not actually affect the outcome of patching unless (1) a
file being patched has a non-' ' whitespace character (e.g., tab) in
its filename, or (2) the patch is whitespace-damaged, so the tab
between filename and timestamp has been replaced with spaces.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c84de70 (excluded_1(): support exclude files in index -
2009-08-20) tries to work around the fact that there is no
directory/file information in index entries, therefore
EXC_FLAG_MUSTBEDIR match would fail.
Unfortunately the workaround is flawed. This fixes it.
Reported-by: Thomas Rinderknecht <thomasr@sailguy.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually when applying a binary diff generated without
--binary, it will be rejected early, as we don't even have
the full sha1 of the pre- and post-images.
However, if the diff is generated with --full-index (but not
--binary), then we will actually try to apply it. If we have
the postimage blob, then we can take a shortcut and never
even look at the binary diff at all (e.g., this can happen
when rebasing changes within a repository).
If we don't have the postimage blob, though, we try to look
at the actual fragments, of which there are none, and get a
segfault. This patch checks explicitly for that case and
complains to the user instead of segfaulting. We need to
keep the check at a low level so that the "shortcut" case
above continues to work.
We also add a test that demonstrates the segfault. While
we're at it, let's also explicitly test the shortcut case.
Reported-by: Rafaël Carré <rafael.carre@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a line contains nothing but whitespace with at least one tab
and the core.whitespace config option contains blank-at-eol, the
whitespace on the line is being printed twice, once unhighlighted
(unless otherwise matched by one of the other core.whitespace values),
and a second time highlighted for blank-at-eol.
Update the leading indentation check to stop checking when it reaches
the trailing whitespace.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance the test_decode_color function to handle all common color codes,
including background colors and escapes that contain multiple codes.
This change necessitates changing <WHITE> to <BOLD>, so update t4034
as well.
This change is necessary for the next commit in order to test
background colors properly.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Encode.pm started updating the string to decode in-place when a second
argument is passed in version 2.40.
This causes 'decode_utf8("", Encode::FB_CROAK)' to die with a message
like:
Modification of a read-only value attempted at .../Encode.pm line 216.
Work around this by passing an empty variable instead of a constant
string.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "shortlog" command defaults to HEAD only when its standard input is
connected to a terminal; otherwise it acts in the traditional "filter"
mode to read and summarize the "git log" output.
Two new tests added to t4203 assumed that the command always default to
HEAD, but when the standard input is closed (or connected to /dev/null),
it output empty, which is a summary of its empty input, causing the test
to break.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current script used by annotate-tests.sh (used by t8001 and t8002) fails
to emit a warning if any of the expected authors never show up in the output
or if authors that show up in the output were never specified as expected.
Update the script to fail in both of these scenarios.
Helped-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b541248 (merge.conflictstyle: choose between "merge" and "diff3
-m" styles, 2008-08-29), git-merge-file uses setup_directory_gently(),
thus cd'ing around to find any possible config files to use.
This broke merge-file when it is called from within a subdirectory of
a repository, and the arguments are all relative paths.
Fix by prepending the prefix, as passed down from the main git
setup code, if there is any.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
