When working in a cross-platform environment, a user may want to
check if text files are stored normalized in the repository and
if .gitattributes are set appropriately.
Make it possible to let Git show the line endings in the index and
in the working tree and the effective text/eol attributes.
The end of line ("eolinfo") are shown like this:
"-text" binary (or with bare CR) file
"none" text file without any EOL
"lf" text file with LF
"crlf" text file with CRLF
"mixed" text file with mixed line endings.
The effective text/eol attribute is one of these:
"", "-text", "text", "text=auto", "text eol=lf", "text eol=crlf"
git ls-files --eol gives an output like this:
i/none w/none attr/text=auto t/t5100/empty
i/-text w/-text attr/-text t/test-binary-2.png
i/lf w/lf attr/text eol=lf t/t5100/rfc2047-info-0007
i/lf w/crlf attr/text eol=crlf doit.bat
i/mixed w/mixed attr/ locale/XX.po
to show what eol convention is used in the data in the index ('i'),
and in the working tree ('w'), and what attribute is in effect,
for each path that is shown.
Add test cases in t0027.
Helped-By: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new expansion function, expand_loose_notes_ref which will first
check whether the ref can be found using get_sha1. If it can't be found
then it will fallback to using expand_notes_ref. The content of the
strbuf will not be changed if the notes ref can be located using
get_sha1. Otherwise, it may be updated as done by expand_notes_ref.
Since we now support merging from non-notes refs, remove the test case
associated with that behavior. Add a test case for merging from a
non-notes ref.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a command line option --in-place to support in-place editing akin to
sed -i. This allows to write commands like the following:
git interpret-trailers --trailer "X: Y" a.txt > b.txt && mv b.txt a.txt
in a more concise way:
git interpret-trailers --trailer "X: Y" --in-place a.txt
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of years ago, I found the need to collaborate on topic
branches that were rebased all the time, and I really needed to see
what I was rebasing when pulling, so I introduced an
interactively-rebasing pull.
The way builtin pull works, this change also supports the value
'interactive' for the 'branch.<name>.rebase' config variable, which
is a neat thing because users can now configure given branches for
interactively-rebasing pulls without having to type out the complete
`--rebase=interactive` option every time they pull.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before auto-gc'ing, we need to make sure that the pack files are
released in case they need to be repacked and garbage-collected.
This fixes https://github.com/git-for-windows/git/issues/500
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can pass -o/--output-directory to the format-patch command to store
patches in some place other than the working directory. This patch
introduces format.outputDirectory configuration option for same
purpose.
The case of usage of this configuration option can be convenience
to not pass every time -o/--output-directory if an user has pattern
to store all patches in the /patches directory for example.
The format.outputDirectory has lower priority than command line
option, so if user will set format.outputDirectory and pass the
command line option, a result will be stored in a directory that
passed to command line option.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After changing the type of a file in the git repository, it is not possible to
"git p4 publish" the commit to perforce. This is due to the fact that the git
"T" status is not handled in git-p4.py. This can typically occur when replacing
an existing file with a symbolic link.
The "T" modifier is now supported in git-p4.py. When a file type has changed,
inform perforce with the "p4 edit -f auto" command.
Signed-off-by: Romain Picard <romain.picard@oakbits.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes call lock_ref_sha1_basic with REF_NODEREF
to operate directly on a symbolic ref. This is used, for
example, to move to a detached HEAD, or when updating
the contents of HEAD via checkout or symbolic-ref.
However, the first step of the function is to resolve the
refname to get the "old" sha1, and we do so without telling
resolve_ref_unsafe() that we are only interested in the
symref. As a result, we may detect a problem there not with
the symref itself, but with something it points to.
The real-world example I found (and what is used in the test
suite) is a HEAD pointing to a ref that cannot exist,
because it would cause a directory/file conflict with other
existing refs. This situation is somewhat broken, of
course, as trying to _commit_ on that HEAD would fail. But
it's not explicitly forbidden, and we should be able to move
away from it. However, neither "git checkout" nor "git
symbolic-ref" can do so. We try to take the lock on HEAD,
which is pointing to a non-existent ref. We bail from
resolve_ref_unsafe() with errno set to EISDIR, and the lock
code thinks we are attempting to create a d/f conflict.
Of course we're not. The problem is that the lock code has
no idea what level we were at when we got EISDIR, so trying
to diagnose or remove empty directories for HEAD is not
useful.
To make things even more complicated, we only get EISDIR in
the loose-ref case. If the refs are packed, the resolution
may "succeed", giving us the pointed-to ref in "refname",
but a null oid. Later, we say "ah, the null oid means we are
creating; let's make sure there is room for it", but
mistakenly check against the _resolved_ refname, not the
original.
We can fix this by making two tweaks:
1. Call resolve_ref_unsafe() with RESOLVE_REF_NO_RECURSE
when REF_NODEREF is set. This means any errors
we get will be from the orig_refname, and we can act
accordingly.
We already do this in the REF_DELETING case, but we
should do it for update, too.
2. If we do get a "refname" return from
resolve_ref_unsafe(), even with RESOLVE_REF_NO_RECURSE
it may be the name of the ref pointed-to by a symref.
We already normalize this back to orig_refname before
taking the lockfile, but we need to do so before the
null_oid check.
While we're rearranging the REF_NODEREF handling, we can
also bump the initialization of lflags to the top of the
function, where we are setting up other flags. This saves us
from having yet another conditional block on REF_NODEREF
just to set it later.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a framework to spawn a group of processes in parallel, and use
it to run "git fetch --recurse-submodules" in parallel.
Rerolled and this seems to be a lot cleaner. The merge of the
earlier one to 'next' has been reverted.
* sb/submodule-parallel-fetch:
submodules: allow parallel fetching, add tests and documentation
fetch_populated_submodules: use new parallel job processing
run-command: add an asynchronous parallel child processor
sigchain: add command to pop all common signals
strbuf: add strbuf_read_once to read without blocking
xread: poll on non blocking fds
submodule.c: write "Fetching submodule <foo>" to stderr
An earlier change in 2.5.x-era broke users' hooks and aliases by
exporting GIT_WORK_TREE to point at the root of the working tree,
interfering when they tried to use a different working tree without
setting GIT_WORK_TREE environment themselves.
* nd/stop-setenv-work-tree:
Revert "setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR"
init_notes() is the main point of entry to the notes API. It ensures
that the input can be used as ref, because it needs a ref to update to
store notes tree after modifying it.
There however are many use cases where notes tree is only read, e.g.
"git log --notes=...". Any notes-shaped treeish could be used for such
purpose, but it is not allowed due to existing restriction.
Allow treeish expressions to be used in the case the notes tree is going
to be used without write "permissions". Add a flag to distinguish
whether the notes tree is intended to be used read-only, or will be
updated.
With this change, operations that use notes read-only can be fed any
notes-shaped tree-ish can be used, e.g. git log --notes=notes@{1}.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's unlikely that we would fail to create or update a
symbolic ref (especially HEAD), but if we do, we should
notice and complain. Note that there's no need to give more
details in our error message; create_symref will already
have done so.
While we're here, let's also fix a minor memory leak in
clone.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when git grep is used outside of a git repository without the
--no-index option git simply dies. For convenience, add a
grep.fallbackToNoIndex configuration variable. If set to true, git grep
behaves like git grep --no-index if it is run outside of a git
repository. It defaults to false, preserving the current behavior.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately, some libgen implementations yield outcomes different
from what Git expects. For example, mingw-w64-crt provides a basename()
function, that shortens `path0/` to `path`!
So let's verify that the basename() and dirname() functions we use
conform to what Git expects.
Derived-from-code-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT_CEILING_DIRECTORIES doesn't prevent chdir up into another directory
while looking for a repository directory if it is equal to the current
directory. Because of this, the test which claims to test the git grep
--no-index command outside of a repository actually tests it inside of a
repository. The test_must_fail assertions still pass because the git
grep only looks at untracked files and therefore no file matches, but
not because it's run outside of a repository as it was originally
intended.
Set the GIT_CEILING_DIRECTORIES environment variable to the parent
directory of the directory in which the git grep command is executed, to
make sure it is actually run outside of a git repository.
In addition, the && chain was broken in a couple of places in the same
test, fix that.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In anticipation of extending this behaviour, add tests verifying the
handling of exclamation marks when looking up a commit "by name".
Specifically, as documented: '<rev>^{/!Message}' should fail, as the '!'
prefix is reserved; while '<rev>^{!!Message}' should search for a commit
whose message contains the string "!Message".
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 57534ee77d. The
feature added in that commit requires that patterns behave the same way
from anywhere. But some patterns can behave differently depending on
current "working" directory. The conditions to catch and avoid these
patterns are too loose. The untracked listing[1] and sparse-checkout
selection[2] can become incorrect as a result.
[1] http://article.gmane.org/gmane.comp.version-control.git/283520
[2] http://article.gmane.org/gmane.comp.version-control.git/283532
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git reflog (ab)uses the log machinery to display its list of log
entries. To do so it must fake commit parent information for the log
walker.
For refs in refs/heads this is no problem, as they should only ever
point to commits. Tags and other refs however can point to anything,
thus their reflog may contain non-commit objects.
To avoid segfaulting, we check whether reflog entries are commits before
feeding them to the log walker and skip any non-commits. This means that
git reflog output will be incomplete for such refs, but that's one step
up from segfaulting. A more complete solution would be to decouple git
reflog from the log walker machinery.
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git replace --edit' should error out when the invoked editor fails,
but the test checking this behavior would not notice if this weren't
the case.
The test in question, ever since it was added in 85f98fc037
(replace: add tests for --edit, 2014-05-17), has simulated a failing
editor in an unconventional way:
test_must_fail env GIT_EDITOR='./fakeeditor;false' git replace --edit
I presume the reason for this unconventional editor was the fact that
'git replace --edit' requires the edited object to be different from
the original, but a mere 'false' as editor would leave the object
unchanged and 'git replace --edit' would error out anyway complaining
about the new and the original object files being the same. Running
'fakeeditor' before 'false' was supposed to ensure that the object
file is modified and thus 'git replace --edit' errors out because of
the failed editor.
However, this editor doesn't actually modify the edited object,
because start_command() turns this editor into:
/bin/sh -c './fakeeditor;false "$@"' './fakeeditor;false' \
'.../.git/REPLACE_EDITOBJ'
This means that the test's fakeeditor script doesn't even get the path
of the object to be edited as argument, triggering error messages from
the commands executed inside the script ('sed' and 'mv'), and
ultimately leaving the object file unchanged.
If a patch were to remove the die() from the error path after
launch_editor(), the test would not catch it, because 'git replace'
would continue execution past launch_editor() and would error out a
bit later due to the unchanged edited object. Though 'git replace'
would error out for the wrong reason, this would satisfy
'test_must_fail' just as well, and the test would succeed leaving the
undesired change unnoticed.
Create a proper failing fake editor script for this test to ensure
that the edited object is in fact modified and 'git replace --edit'
won't error out because the new and original object files are the
same.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
History traversal with "git log --source" that starts with an
annotated tag failed to report the tag as "source", due to an
old regression in the command line parser back in v2.2 days.
* jk/pending-keep-tag-name:
revision.c: propagate tag names from pending array
"git symbolic-ref" forgot to report a failure with its exit status.
* jk/symbolic-ref-maint:
t1401: test reflog creation for git-symbolic-ref
symbolic-ref: propagate error code from create_symref()
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mutt saves aliases with escaped quotes in the form of:
alias dot \"Dot U. Sir\" <somebody@example.org>
When we pass through our sanitize_address routine,
we end up with double-escaping:
To: "\\\"Dot U. Sir\\\" <somebody@example.org>
Remove the escaping in mutt only for now, as I am not sure
if other mailers can do this or if this is better fixed in
sanitize_address.
Cc: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Cc: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The create_symref() function predates the existence of
"struct lock_file", let alone the more recent "struct
ref_lock". Instead, it just does its own manual dot-locking.
Besides being more code, this has a few downsides:
- if git is interrupted while holding the lock, we don't
clean up the lockfile
- we don't do the usual directory/filename conflict check.
So you can sometimes create a symref "refs/heads/foo/bar",
even if "refs/heads/foo" exists (namely, if the refs are
packed and we do not hit the d/f conflict in the
filesystem).
This patch refactors create_symref() to use the "struct
ref_lock" interface, which handles both of these things.
There are a few bonus cleanups that come along with it:
- we leaked ref_path in some error cases
- the symref contents were stored in a fixed-size buffer,
putting an artificial (albeit large) limitation on the
length of the refname. We now write through fprintf, and
handle refnames of any size.
- we called adjust_shared_perm only after the file was
renamed into place, creating a potential race with
readers in a shared repository. The lockfile code now
handles this when creating the lockfile, making it
atomic.
- the legacy prefer_symlink_refs path did not do any
locking at all. Admittedly, it is not atomic from a
reader's perspective (as it unlinks and re-creates the
symlink to overwrite), but at least it cannot conflict
with other writers now.
- the result of this patch is hopefully more readable. It
eliminates three goto labels. Two were for error checking
that is now simplified, and the third was to reach shared
code that has been pulled into its own function.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" when interacting with multiple depots at the same time
used to incorrectly drop changes.
* sh/p4-multi-depot:
git-p4: reduce number of server queries for fetches
git-p4: support multiple depot paths in p4 submit
git-p4: failing test case for skipping changes with multiple depots
History traversal with "git log --source" that starts with an
annotated tag failed to report the tag as "source", due to an
old regression in the command line parser back in v2.2 days.
* jk/pending-keep-tag-name:
revision.c: propagate tag names from pending array
"git symbolic-ref" forgot to report a failure with its exit status.
* jk/symbolic-ref-maint:
t1401: test reflog creation for git-symbolic-ref
symbolic-ref: propagate error code from create_symref()
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of making the shell expand 00* and invoke 'echo' with it,
and then capturing its output as command substitution, just use
the result of expanding 00* directly.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unfortunate commit d95138e (setup: set env $GIT_WORK_TREE when
work tree is set, like $GIT_DIR - 2015-06-26) exposes another problem,
besides git-clone that's described in the previous commit. If
GIT_WORK_TREE (or even GIT_DIR) is exported to an alias script, it may
mislead git commands in the script where the repo is. Granted, most
scripts work on the repo where the alias is summoned from. But nowhere
do we forbid the script to visit another repository.
The revert of d95138e in the previous commit is sufficient as a
fix. However, to protect us from accidentally leaking GIT_*
environment variables again, we restore certain sensitive env before
calling the external script.
GIT_PREFIX is let through because there's another setup side effect
that we simply accepted so far: current working directory is
moved. Maybe in future we can introduce a new alias format that
guarantees no cwd move, then we can unexport GIT_PREFIX.
Reported-by: Gabriel Ganne <gabriel.ganne@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d95138e [1] attempted to fix a .git file problem by
setting GIT_WORK_TREE whenever GIT_DIR is set. It sounded harmless
because we handle GIT_DIR and GIT_WORK_TREE side by side for most
commands, with two exceptions: git-init and git-clone.
"git clone" is not happy with d95138e. This command ignores GIT_DIR
but respects GIT_WORK_TREE [2] [3] which means it used to run fine
from a hook, where GIT_DIR was set but GIT_WORK_TREE was not (*).
With d95138e, GIT_WORK_TREE is set all the time and git-clone
interprets that as "I give you order to put the worktree here",
usually against the user's intention.
The solution in d95138e is reverted earlier, and instead we reuse
the solution from c056261 [4]. It fixed another setup-messed-
up-by-alias by saving and restoring env and spawning a new process,
but for git-clone and git-init only.
Now we conclude that setup-messed-up-by-alias is always evil. So the
env restoration is done for _all_ commands, including external ones,
whenever aliases are involved. It fixes what d95138e tried to fix,
without upsetting git-clone-inside-hooks.
The test from d95138e remains to verify it's not broken by this. A new
test is added to make sure git-clone-inside-hooks remains happy.
(*) GIT_WORK_TREE was not set _most of the time_. In some cases
GIT_WORK_TREE is set and git-clone will behave differently. The
use of GIT_WORK_TREE to direct git-clone to put work tree
elsewhere looks like a mistake because it causes surprises this
way. But that's a separate story.
[1] d95138e (setup: set env $GIT_WORK_TREE when work tree is set, like
$GIT_DIR - 2015-06-26)
[2] 2beebd2 (clone: create intermediate directories of destination
repo - 2008-06-25)
[3] 20ccef4 (make git-clone GIT_WORK_TREE aware - 2007-07-06)
[4] c056261 (git potty: restore environments after alias expansion -
2014-06-08)
Reported-by: Anthony Sottile <asottile@umich.edu>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code writes a reflog entry whenever we update a
symbolic ref, but we never test that this is so. Let's add a
test to make sure upcoming refactoring doesn't cause a
regression.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If create_symref() fails, git-symbolic-ref will still exit
with code 0, and our caller has no idea that the command did
nothing.
This appears to have been broken since the beginning of time
(e.g., it is not a regression where create_symref() stopped
calling die() or something similar).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching changes from a depot using a full client spec, there
is no need to perform as many queries as there are top-level paths
in the client spec. Instead we query all changes in chronological
order, also getting rid of the need to sort the results and remove
duplicates.
Signed-off-by: Sam Hocevar <sam@hocevar.net>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"format-patch" has learned a new option to zero-out the commit
object name on the mbox "From " line.
* bc/format-patch-null-from-line:
format-patch: check that header line has expected format
format-patch: add an option to suppress commit hash
sha1_file.c: introduce a null_oid constant
Add new config to avoid typing "--recurse-submodules" on each push.
* mc/push-recurse-submodules-config:
push: follow the "last one wins" convention for --recurse-submodules
push: test that --recurse-submodules on command line overrides config
push: add recurseSubmodules config option
When we unwrap a tag to find its commit for a traversal, we
do not propagate the "name" field of the tag in the pending
array (i.e., the ref name the user gave us in the first
place) to the commit (instead, we use an empty string). This
means that "git log --source" will never show the tag-name
for commits we reach through it.
This was broken in 2073949 (traverse_commit_list: support
pending blobs/trees with paths, 2014-10-15). That commit
tried to be careful and avoid propagating the path
information for a tag (which would be nonsensical) to trees
and blobs. But it should not have cut off the "name" field,
which should carry forward to children.
Note that this does mean that the "name" field will carry
forward to blobs and trees, too. Whereas prior to 2073949,
we always gave them an empty string. This is the right thing
to do, but in practice no callers probably use it (since now
we have an explicit separate "path" field, which was the
point of 2073949).
We add tests here not only for the broken case, but also a
basic sanity test of "log --source" in general, which did
not have any coverage in the test suite.
Reported-by: Raymundo <gypark@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" started with merge strategy options did not
propagate them upon "git rebase --continue".
* fr/rebase-i-continue-preserve-options:
rebase -i: remember merge options beyond continue actions
This allows to run external commands in parallel with ordered output
on stderr.
If we run external commands in parallel we cannot pipe the output directly
to the our stdout/err as it would mix up. So each process's output will
flow through a pipe, which we buffer. One subprocess can be directly
piped to out stdout/err for a low latency feedback to the user.
Example:
Let's assume we have 5 submodules A,B,C,D,E and each fetch takes a
different amount of time as the different submodules vary in size, then
the output of fetches in sequential order might look like this:
time -->
output: |---A---| |-B-| |-------C-------| |-D-| |-E-|
When we schedule these submodules into maximal two parallel processes,
a schedule and sample output over time may look like this:
process 1: |---A---| |-D-| |-E-|
process 2: |-B-| |-------C-------|
output: |---A---|B|---C-------|DE
So A will be perceived as it would run normally in the single child
version. As B has finished by the time A is done, we can dump its whole
progress buffer on stderr, such that it looks like it finished in no
time. Once that is done, C is determined to be the visible child and
its progress will be reported in real time.
So this way of output is really good for human consumption, as it only
changes the timing, not the actual output.
For machine consumption the output needs to be prepared in the tasks,
by either having a prefix per line or per block to indicate whose tasks
output is displayed, because the output order may not follow the
original sequential ordering:
|----A----| |--B--| |-C-|
will be scheduled to be all parallel:
process 1: |----A----|
process 2: |--B--|
process 3: |-C-|
output: |----A----|CB
This happens because C finished before B did, so it will be queued for
output before B.
To detect when a child has finished executing, we check interleaved
with other actions (such as checking the liveliness of children or
starting new processes) whether the stderr pipe still exists. Once a
child closed its stderr stream, we assume it is terminating very soon,
and use `finish_command()` from the single external process execution
interface to collect the exit status.
By maintaining the strong assumption of stderr being open until the
very end of a child process, we can avoid other hassle such as an
implementation using `waitpid(-1)`, which is not implemented in Windows.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "Pushing submodule <foo>" progress output correctly goes to
stderr, but "Fetching submodule <foo>" is going to stdout by
mistake. Fix it to write to stderr.
Noticed while trying to implement a parallel submodule fetch. When
this particular output line went to a different file descriptor, it
was buffered separately, resulting in wrongly interleaved output if
we copied it to the terminal naively.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The format of the "From " header line is very specific to allow
utilities to detect Git-style patches. Add a test that the patches
created are in the expected format.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Oftentimes, patches created by git format-patch will be stored in
version control or compared with diff. In these cases, two otherwise
identical patches can have different commit hashes, leading to diff
noise. Teach git format-patch a --zero-commit option that instead
produces an all-zero hash to avoid this diff noise.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" used to import Perforce CLs that touch only paths outside
the client spec as empty commits. It has been corrected to ignore
them instead, with a new configuration git-p4.keepEmptyCommits as a
backward compatibility knob.
* ls/p4-keep-empty-commits:
git-p4: add option to keep empty commits
"git p4" used to import Perforce CLs that touch only paths outside
the client spec as empty commits. It has been corrected to ignore
them instead, with a new configuration git-p4.keepEmptyCommits as a
backward compatibility knob.
* ls/p4-keep-empty-commits:
git-p4: add option to keep empty commits
James Farwell reported that with multiple depots git-p4 would
skip changes.
http://article.gmane.org/gmane.comp.version-control.git/282297
Add a failing test case demonstrating the problem.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user explicitly specified a merge strategy or strategy
options, continue to use that strategy/option after
"rebase --continue". Add a test of the corrected behavior.
If --merge is specified or implied by -s or -X, then "strategy and
"strategy_opts" are set to values from which "strategy_args" can be
derived; otherwise they are set to empty strings. Either way,
their values are propagated from one step of an interactive rebase
to the next via state files.
"do_merge", on the other hand, is *not* propagated to later steps of
an interactive rebase. Therefore, making the initialization of
"strategy_args" conditional on "do_merge" being set prevents later
steps of an interactive rebase from setting it correctly.
Luckily, we don't need the "do_merge" guard at all. If the rebase
was started without --merge, then "strategy" and "strategy_opts"
are both the empty string, which results in "strategy_args" also
being set to the empty string, which is just what we want in that
situation. So remove the "do_merge" guard and derive
"strategy_args" from "strategy" and "strategy_opts" every time.
Reported-by: Diogo de Campos <campos@esss.com.br>
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Helped-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because "test_when_finished" in our test framework queues the
clean-up tasks to be done in a shell variable, it should not be
used inside a subshell. Add a mechanism to allow 'bash' to catch
such uses, and fix the ones that were found.
* jk/test-lint-forbid-when-finished-in-subshell:
test-lib-functions: detect test_when_finished in subshell
t7800: don't use test_config in a subshell
test-lib-functions: support "test_config -C <dir> ..."
t5801: don't use test_when_finished in a subshell
t7610: don't use test_config in a subshell
A changelist that contains only excluded files due to a client spec was
imported as an empty commit. Fix that issue by ignoring these commits.
Add option "git-p4.keepEmptyCommits" to make the previous behavior
available.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Helped-by: Pete Harlan
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix some racy client/server tests by treating SIGPIPE the same as a
normal non-zero exit.
* ls/test-must-fail-sigpipe:
add "ok=sigpipe" to test_must_fail and use it to fix flaky tests
implement test_might_fail using a refactored test_must_fail
Produce correct "dirty" marker for shell prompts, even when we
are on an orphan or an unborn branch.
* sg/bash-prompt-dirty-orphan:
bash prompt: indicate dirty index even on orphan branches
bash prompt: remove a redundant 'git diff' option
bash prompt: test dirty index and worktree while on an orphan branch
There was no way to defeat a configured rebase.autostash variable
from the command line, as "git rebase --no-autostash" was missing.
* jk/rebase-no-autostash:
Documentation/git-rebase: fix --no-autostash formatting
rebase: support --no-autostash
As CodingGuidelines says, some versions of bash errors out when
$variable substitution is used as the target for redirection without
being quoted (even though POSIX may not require such a quote).
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the "last one wins" convention for --recurse-submodules rather
than treating conflicting options as an error.
Also, fix the declaration of the file-scope recurse_submodules
global variable to put it on a separate line.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5531 only checked that the push.recurseSubmodules config option was
overridden by passing --recurse-submodules=check on the command
line. Add new tests for overriding with --recurse-submodules=no,
--no-recurse-submodules and --recurse-submodules=push too.
Also correct minor typo in test commit message.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to prepare the working tree side of temporary directory
for the "dir-diff" feature forgot that symbolic links need not be
copied (or symlinked) to the temporary area, as the code already
special cases and overwrites them. Besides, it was wrong to try
computing the object name of the target of symbolic link, which may
not even exist or may be a directory.
* da/difftool:
difftool: ignore symbolic links in use_wt_file
Having a leftover .idx file without corresponding .pack file in
the repository hurts performance; "git gc" learned to prune them.
We may want to do the same for .bitmap (and notice but not prune
.keep) without corresponding .pack, but that can be a separate
topic.
* dk/gc-idx-wo-pack:
gc: remove garbage .idx files from pack dir
t5304: test cleaning pack garbage
prepare_packed_git(): refactor garbage reporting in pack directory
Produce correct "dirty" marker for shell prompts, even when we
are on an orphan or an unborn branch.
* sg/bash-prompt-dirty-orphan:
bash prompt: indicate dirty index even on orphan branches
bash prompt: remove a redundant 'git diff' option
bash prompt: test dirty index and worktree while on an orphan branch
Teach send-email to dump mail aliases, so that we can do tab completion
on the command line.
* jk/send-email-complete-aliases:
completion: add support for completing email aliases
sendemail: teach git-send-email to dump alias names
Speed up filter-branch for cases where we only care about rewriting
commits, not tree data.
* jk/filter-branch-no-index:
filter-branch: skip index read/write when possible
Fsck did not correctly detect a NUL-truncated header in a tag.
* rs/fsck-nul-header:
fsck: treat a NUL in a tag header as an error
t1450: add tests for NUL in headers of commits and tags
Work around some test flakiness with p4d.
* ls/p4-test-timeouts:
git-p4: add trap to kill p4d on test exit
git-p4: add p4d timeout in tests
git-p4: retry kill/cleanup operations in tests with timeout
Clean up style in an ancient test.
* js/test-modernize-t9300:
modernize t9300: move test preparations into test_expect_success
modernize t9300: mark here-doc words to ignore tab indentation
modernize t9300: use test_when_finished for clean-up
modernize t9300: wrap lines after &&
modernize t9300: use test_must_be_empty
modernize t9300: use test_must_fail
modernize t9300: single-quote placement and indentation
* maint:
http: treat config options sslCAPath and sslCAInfo as paths
Documentation/diff: give --word-diff-regex=. example
filter-branch: deal with object name vs. pathname ambiguity in tree-filter
check-ignore: correct documentation about output
git-p4: clean up after p4 submit failure
git-p4: work with a detached head
git-p4: add option to system() to return subshell status
git-p4: add failing test for submit from detached head
remote-http(s): support SOCKS proxies
t5813: avoid creating urls that break on cygwin
Escape Git's exec path in contrib/rerere-train.sh script
allow hooks to ignore their standard input stream
rebase-i-exec: Allow space in SHELL_PATH
Documentation: make environment variable formatting more consistent
Just like the working tree is cleaned up when the user cancelled
submission in P4Submit.applyCommit(), clean up the mess if "p4
submit" fails.
* eg/p4-submit-catch-failure:
git-p4: clean up after p4 submit failure
Make git-p4 work on a detached head.
* ld/p4-detached-head:
git-p4: work with a detached head
git-p4: add option to system() to return subshell status
git-p4: add failing test for submit from detached head
t5516 "75 - deny fetch unreachable SHA1, allowtipsha1inwant=true" is
flaky in the following case:
1. remote upload-pack finds out "not our ref"
2. remote sends a response and closes the pipe
3. fetch-pack still tries to write commands to the remote upload-pack
4. write call in wrapper.c dies with SIGPIPE
The test is flaky because the sending fetch-pack may or may
not have finished writing its output by step (3). If it did,
then we see a closed pipe on the next read() call. If it
didn't, then we get the SIGPIPE from step (4) above. Both
are fine, but the latter fools test_must_fail.
t5504 "9 - push with transfer.fsckobjects" is flaky, too, and returns
SIGPIPE once in a while. I had to remove the final "To dst..." output
check because there is no output if the process dies with SIGPIPE.
Accept such a death-with-sigpipe also as OK when we are expecting a
failure.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Add an (optional) first parameter "ok=<special case>" to test_must_fail
and return success for "<special case>". Add "success" as
"<special case>" and use it to implement "test_might_fail". This removes
redundancies in test-lib-function.sh.
You can pass multiple <special case> arguments divided by comma (e.g.
"test_must_fail ok=success,something")
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Jeff King <peff@peff.net>
'git filter-branch' fails complaining about an ambiguous argument, if
a tree-filter renames a path and the new pathname happens to match an
existing object name.
After the tree-filter has been applied, 'git filter-branch' looks for
changed paths by running:
git diff-index -r --name-only --ignore-submodules $commit
which then, because of the lack of disambiguating double-dash, can't
decide whether to treat '$commit' as revision or path and errors out.
Add that disambiguating double-dash after 'git diff-index's revision
argument to make sure that '$commit' is interpreted as a revision.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
Commit 1b0d400 refactored the prepare_final() function so
that it could be reused in multiple places. Originally, the
loop had two outputs: a commit to stuff into sb->final, and
the name of the commit from the rev->pending array.
After the refactor, that loop is put in its own function
with a single return value: the object_array_entry from the
rev->pending array. This contains both the name and the object,
but with one important difference: the object is the
_original_ object found by the revision parser, not the
dereferenced commit. If one feeds a tag to "git blame", we
end up casting the tag object to a "struct commit", which
causes a segfault.
Instead, let's return the commit (properly casted) directly
from the function, and take the "name" as an optional
out-parameter. This does the right thing, and actually
simplifies the callers, who no longer need to cast or
dereference the object_array_entry themselves.
[test case by Max Kirillov <max@max630.net>]
Signed-off-by: Jeff King <peff@peff.net>
When "p4 submit" command fails in P4Submit.applyCommit, the
workspace is left with the changes. We already have code to revert
the changes to the workspace when the user decides to cancel
submission by aborting the editor that edits the change description,
and we should treat the "p4 submit" failure the same way.
Clean the workspace if p4_write_pipe raised SystemExit, so that the
user don't have to do it themselves.
Signed-off-by: GIRARD Etienne <egirard@murex.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Jeff King <peff@peff.net>
__git_ps1() doesn't indicate dirty index while on an orphan branch.
To check the dirtiness of the index, __git_ps1() runs 'git diff-index
--cached ... HEAD', which doesn't work on an orphan branch,
because HEAD doesn't point to a valid commit.
Run 'git diff ... --cached' instead, as it does the right thing both
on valid and invalid HEAD, i.e. compares the index to the existing
HEAD in the former case and to the empty tree in the latter. This
fixes the two failing tests added in the first commit of this series.
The dirtiness of the worktree is already checked with 'git diff' and
is displayed correctly even on an orphan branch.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
There is only a single test exercising the dirty state indicator on an
orphan branch, and in that test neither the index nor the worktree are
dirty.
Add two failing tests to check the dirty state indicator while either
the index is dirty or while both the index and the worktree are dirty
on an orphan branch, and to show that the dirtiness of the index is
not displayed in these cases (the fourth combination, i.e. clean index
and dirty worktree are impossible on an orphan branch). Update the
existing dirty state indicator on clean orphan branch test to match
the style of the two new tests, most importantly to use 'git checkout
--orphan' instead of cd-ing into a repository that just happens to be
empty and clean.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
When submitting, git-p4 finds the current branch in
order to know if it is allowed to submit (configuration
"git-p4.allowSubmit").
On a detached head, detecting the branch would fail, and
git-p4 would report a cryptic error.
This change teaches git-p4 to recognise a detached head and
submit successfully.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Jeff King <peff@peff.net>
git-p4 can't submit from a detached head. This test case
demonstrates the problem.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Jeff King <peff@peff.net>
The --recurse-submodules command line parameter has existed for some
time but it has no config file equivalent.
Following the style of the corresponding parameter for git fetch, let's
invent push.recurseSubmodules to provide a default for this
parameter. This also requires the addition of --recurse-submodules=no to
allow the configuration to be overridden on the command line when
required.
The most straightforward way to implement this appears to be to make
push use code in submodule-config in a similar way to fetch.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Jeff King <peff@peff.net>
We check the return value of verify_header() for commits already, so do
the same for tags as well.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Sometimes the "prove" test runner hangs on test exit because p4d is
still running. Add a trap to always kill "p4d" on test exit.
You can reproduce the problem by commenting "P4D_TIMEOUT" in
"lib-git-p4.sh" and running "prove ./t9800-git-p4-basic.sh".
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Our usual style these days is to execute everything inside
test_expect_success. Make it so.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Add an option "--dump-aliases" which changes the default behavior of
git-send-email. This mode will simply read the alias files configured by
sendemail.aliasesfile and sendemail.aliasfiletype and dump a list of all
configured aliases, one per line. The intended use case for this option
is the bash-completion script which will use it to autocomplete aliases
on the options which take addresses.
Add some tests for the new option using various alias file formats.
A possible future extension to the alias dump format could be done by
extending the --dump-aliases to take an optional argument defining the
format to display. This has not been done in this patch as no user of
this information has been identified.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
In rare cases p4d seems to hang. This watchdog will kill the p4d
process after 300s in any case. That means each individual git p4 test
needs to finish before 300s or it will fail.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Jeff King <peff@peff.net>
In the next commit, we will indent test case preparations. This will
require that here-documents ignore the tab indentation. Prepare for
this change by marking the here-doc words accordingly. This does not
have an effect now, but will remove some noise from the git diff -b
output of the next commit.
The change here is entirely automated with this perl command:
perl -i -lpe 's/(cat.*<<) *((EOF|(EXPECT|INPUT)_END).*$)/$1-$2 &&/' t/t9300-fast-import.sh
i.e., inserts a dash between << and the EOF word (and removes blanks
that our style guide abhors) and appends the && that will become
necessary.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
In rare cases kill/cleanup operations in tests fail. Retry these
operations with a timeout to make the test less flaky.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
A number of clean-ups of test cases are performed outside of
test_expect_success. Replace these cases by using test_when_finished.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
It is customary to have each command in test snippets on its own line.
Fix those instances that do not follow this guideline.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Instead of comparing actual output to an empty file, use
test_must_be_empty. In addition to the better error message provided by
the helper, allocation of an empty file during the setup sequence can be
avoided.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
One test case open-codes a test for an expected failure. Replace it by
test_must_fail.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Many test cases do not follow our modern style that places the
single-quotes that surround the shell code snippets before and after
the shell code. Make it so.
Many of the lines changed in this way are indented other than by a
single tab. Change them (and some additional lines) to be indented
with a tab.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Extend transfer.hideRefs to work better with use of namespaces.
* lf/ref-is-hidden-namespace:
t5509: add basic tests for hideRefs
hideRefs: add support for matching full refs
upload-pack: strip refs before calling ref_is_hidden()
config.txt: document the semantics of hideRefs with namespaces
Having a leftover .idx file without corresponding .pack file in
the repository hurts performance; "git gc" learned to prune them.
* dk/gc-idx-wo-pack:
gc: remove garbage .idx files from pack dir
t5304: test cleaning pack garbage
prepare_packed_git(): refactor garbage reporting in pack directory
When passed an ssh:// url, git strips ssh://host from the url but does
not remove leading slashes from the path. So when this test used
ssh://remote//path/to/pwd, the path accessed by our fake SSH is
//path/to/pwd, which cygwin interprets as a UNC path, causing the test
to fail.
We may want to actually fix this in git itself, making it remove extra
slashes from urls before feeding them to transports or helpers, but
that's for another topic as it could cause regressions.
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Jeff King <peff@peff.net>
Since ec7dbd145 (receive-pack: allow hooks to ignore its
standard input stream) the pre-receive and post-receive
hooks ignore SIGPIPE. Do the same for the remaining hooks
pre-push and post-rewrite, which read from standard input.
The same arguments for ignoring SIGPIPE apply.
Include test by Jeff King which checks that SIGPIPE does not
cause pre-push hook failure. With the use of git update-ref
--stdin it is fast enough to be enabled by default.
Signed-off-by: Clemens Buchacher <clemens.buchacher@intel.com>
Signed-off-by: Jeff King <peff@peff.net>
If the user specifies an index filter but not a tree filter,
filter-branch cleverly avoids checking out the tree
entirely. But we don't do the next level of optimization: if
you have no index or tree filter, we do not need to read the
index at all.
This can greatly speed up cases where we are only changing
the commit objects (e.g., cementing a graft into place).
Here are numbers from the newly-added perf test:
Test HEAD^ HEAD
---------------------------------------------------------------
7000.2: noop filter 13.81(4.95+0.83) 5.43(0.42+0.43) -60.7%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status --branch --short" accessed beyond the constant string
"HEAD", which has been corrected.
* rs/wt-status-detached-branch-fix:
wt-status: use skip_prefix() to get rid of magic string length constants
wt-status: don't skip a magical number of characters blindly
wt-status: avoid building bogus branch name with detached HEAD
wt-status: exit early using goto in wt_shortstatus_print_tracking()
t7060: add test for status --branch on a detached HEAD
"git --literal-pathspecs add -u/-A" without any command line
argument misbehaved ever since Git 2.0.
* jc/add-u-A-default-to-top:
add: simplify -u/-A without pathspec
Merging a branch that removes a path and another that changes the
mode bits on the same path should have conflicted at the path, but
it didn't and silently favoured the removal.
* jk/delete-modechange-conflict:
merge: detect delete/modechange conflict
t6031: generalize for recursive and resolve strategies
t6031: move triple-rename test to t3030
It was not possible to use a repository-lookalike created by "git
worktree add" as a local source of "git clone".
* nd/clone-linked-checkout:
clone: better error when --reference is a linked checkout
clone: allow --local from a linked checkout
enter_repo: allow .git files in strict mode
enter_repo: avoid duplicating logic, use is_git_directory() instead
t0002: add test for enter_repo(), non-strict mode
path.c: delete an extra space
Test whether regular and full hideRefs patterns work as expected when
namespaces are used.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Lukas Fleischer <lfleischer@lfos.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a custom report_garbage handler to collect and remove
garbage .idx files from the pack directory.
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pack garbage, noticeably stale .idx files, can be cleaned up during
a garbage collection. This tests to ensure such garbage is properly
cleaned up.
Note that the prior test for checking pack garbage with count-objects
left some stale garbage after the test exited. This has also been
corrected.
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge-file" tried to signal how many conflicts it found, which
obviously would not work well when there are too many of them.
* jk/merge-file-exit-code:
merge-file: clamp exit code to maximum 127
The submodule code has been taught to work better with separate
work trees created via "git worktree add".
* mk/submodule-gitdir-path:
path: implement common_dir handling in git_pathdup_submodule()
submodule refactor: use strbuf_git_path_submodule() in add_submodule_odb()
Work around "git p4" failing when the P4 depot records the contents
in UTF-16 without UTF-16 BOM.
* ls/p4-translation-failure:
git-p4: handle "Translation of file content failed"
git-p4: add test case for "Translation of file content failed" error
Recent update to "rebase -i" that tries to sanity check the edited
insn sheet before it uses it has become too picky on Windows where
CRLF left by the editor is turned into a trailing CR on the line
read via the "read" built-in command.
* gr/rebase-i-drop-warn:
rebase-i: work around Windows CRLF line endings
t3404: "rebase -i" gets broken when insn sheet uses CR/LF line endings
"git clone --dissociate" runs a big "git repack" process at the
end, and it helps to close file descriptors that are open on the
packs and their idx files before doing so on filesystems that
cannot remove a file that is still open.
* js/clone-dissociate:
clone --dissociate: avoid locking pack files
sha1_file.c: add a function to release all packs
sha1_file: consolidate code to close a pack's file descriptor
t5700: demonstrate a Windows file locking issue with `git clone --dissociate`
Correct "git p4 --detect-labels" so that it does not fail to create
a tag that points at a commit that is also being imported.
* ld/p4-import-labels:
git-p4: fix P4 label import for unprocessed commits
git-p4: do not terminate creating tag for unknown commit
git-p4: failing test for ignoring invalid p4 labels
Prepare for Git on-disk repository representation to undergo
backward incompatible changes by introducing a new repository
format version "1", with an extension mechanism.
* jk/repository-extension:
introduce "preciousObjects" repository extension
introduce "extensions" form of core.repositoryformatversion
"git blame" learnt to take "--first-parent" and "--reverse" at the
same time when it makes sense.
* mk/blame-first-parent:
blame: allow blame --reverse --first-parent when it makes sense
blame: extract find_single_final
blame: test to describe use of blame --reverse --first-parent
"git status --branch --short" accessed beyond the constant string
"HEAD", which has been corrected.
* rs/wt-status-detached-branch-fix:
wt-status: use skip_prefix() to get rid of magic string length constants
wt-status: don't skip a magical number of characters blindly
wt-status: avoid building bogus branch name with detached HEAD
wt-status: exit early using goto in wt_shortstatus_print_tracking()
t7060: add test for status --branch on a detached HEAD
The code to prepare the working tree side of temporary directory
for the "dir-diff" feature forgot that symbolic links need not be
copied (or symlinked) to the temporary area, as the code already
special cases and overwrites them. Besides, it was wrong to try
computing the object name of the target of symbolic link, which may
not even exist or may be a directory.
* da/difftool:
difftool: ignore symbolic links in use_wt_file
Using the timestamp based criteria in "git branch --sort" did not
tiebreak branches that point at commits with the same timestamp (or
the same commit), making the resulting output unstable.
* kn/for-each-branch:
ref-filter: fallback on alphabetical comparison
If we're on a detached HEAD then wt_shortstatus_print_tracking() takes
the string "HEAD (no branch)", translates it, skips the first eleven
characters and passes the result to branch_get(), which returns a bogus
result and accesses memory out of bounds in order to produce it.
Somehow stat_tracking_info(), which is passed that result, does the
right thing anyway, i.e. it finds that there is no base.
Avoid the bogus results and memory accesses by checking for HEAD first
and exiting early in that case. This fixes t7060 with --valgrind.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test fails when run under Valgrind because branch_get() gets passed
a bogus branch name pointer:
==62831== Invalid read of size 1
==62831== at 0x4F76AE: branch_get (remote.c:1650)
==62831== by 0x53499E: wt_shortstatus_print_tracking (wt-status.c:1654)
==62831== by 0x53499E: wt_shortstatus_print (wt-status.c:1706)
==62831== by 0x428D29: cmd_status (commit.c:1384)
==62831== by 0x405D6D: run_builtin (git.c:350)
==62831== by 0x405D6D: handle_builtin (git.c:536)
==62831== by 0x404F10: run_argv (git.c:582)
==62831== by 0x404F10: main (git.c:690)
==62831== Address 0x5e89b0b is 6 bytes after a block of size 5 alloc'd
==62831== at 0x4C28C4F: malloc (vg_replace_malloc.c:299)
==62831== by 0x59579E9: strdup (strdup.c:42)
==62831== by 0x52E108: xstrdup (wrapper.c:43)
==62831== by 0x5322A6: wt_status_prepare (wt-status.c:130)
==62831== by 0x4276E0: status_init_config (commit.c:184)
==62831== by 0x428BB8: cmd_status (commit.c:1350)
==62831== by 0x405D6D: run_builtin (git.c:350)
==62831== by 0x405D6D: handle_builtin (git.c:536)
==62831== by 0x404F10: run_argv (git.c:582)
==62831== by 0x404F10: main (git.c:690)
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow combining --reverse and --first-parent if initial commit of
specified range is at the first-parent chain starting from the final
commit. Disable the prepare_revision_walk()'s builtin children
collection, instead picking only the ones which are along the first
parent chain.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reverse blame can be used to locate removal of lines which does not
change adjacent lines. Such edits do not appear in non-reverse blame,
because the adjacent lines last changed commit is older history, before
the edit.
For a big and active project which uses topic branches, or analogous
feature, for example pull-requests, the history can contain many
concurrent branches, and even after an edit merged into the target
branch, there are still many (sometimes several tens or even hundreds)
topic branch which do not contain it:
a0--a1-----*a2-*a3-a4...-*a100
|\ / / /
| b0-B1..bN / /
|\ / /
| c0.. ..cN /
\ /
z0.. ..zN
Here, the '*'s mark the first parent in merge, and uppercase B1 - the
commit where the line being blamed for was removed. Since commits cN-zN
do not contain B1, they still have the line removed in B1, and
reverse blame can report that the last commit for the line was zN
(meaning that it was removed in a100). In fact it really does return
some very late commit, and this makes it unusable for finding the B1
commit.
The search could be done by blame --reverse --first-parent. For range
a0..a100 it would return a1, and then only one additional blame along
the a0..bN will return the desired commit b0. But combining --reverse
and --first-parent was forbidden in 95a4fb0eac, because incorrectly
specified range could produce unexpected and meaningless result.
Add test which describes the expected behavior of
`blame --reverse --first-parent` in the case described above.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When prefixing a Git call in the test suite with 'debug ', it will
now be run with GDB, allowing the developer to debug test failures
more conveniently.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ref-filter.c the comparison of refs while sorting is handled by
cmp_ref_sorting() function. When sorting as per numerical values
(e.g. --sort=objectsize) there is no fallback comparison when both
refs hold the same value. This can cause unexpected results (i.e. the
order of listing refs with equal values cannot be pre-determined) as
pointed out by Johannes Sixt ($gmane/280117).
Hence, fallback to alphabetical comparison based on the refname
whenever the other criterion is equal.
A test in t3203 was expecting that branch-two sorts before HEAD, which
happened to be how qsort(3) on Linux sorted the array, but (1) that
outcome was not even guaranteed, and (2) once we start breaking ties
with the refname, "HEAD" should sort before "branch-two" so the
original expectation was inconsistent with the criterion we now use.
Update it to match the new world order, which we can now depend on
being stable.
Helped-by: Junio C Hamano <gitster@pobox.com>
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge-file" tried to signal how many conflicts it found, which
obviously would not work well when there are too many of them.
* jk/merge-file-exit-code:
merge-file: clamp exit code to maximum 127
Recent update to "rebase -i" that tries to sanity check the edited
insn sheet before it uses it has become too picky on Windows where
CRLF left by the editor is turned into a trailing CR on the line
read via the "read" built-in command.
* gr/rebase-i-drop-warn:
rebase-i: work around Windows CRLF line endings
t3404: "rebase -i" gets broken when insn sheet uses CR/LF line endings
Merging a branch that removes a path and another that changes the
mode bits on the same path should have conflicted at the path, but
it didn't and silently favoured the removal.
* jk/delete-modechange-conflict:
merge: detect delete/modechange conflict
t6031: generalize for recursive and resolve strategies
t6031: move triple-rename test to t3030
"git --literal-pathspecs add -u/-A" without any command line
argument misbehaved ever since Git 2.0.
* jc/add-u-A-default-to-top:
add: simplify -u/-A without pathspec
"git clone --dissociate" used to require that "--reference" was
used at the same time, but you can create a new repository that
borrows objects from another without using "--reference", namely
with "clone --local" from a repository that borrows objects from
other repositories.
* ar/clone-dissociate:
clone: allow "--dissociate" without reference
The caller is preparing a narrowed-down copy of the working tree and
this function is asked if the path should be included in that copy.
If we say yes, the path from the working tree will be either symlinked
or copied into the narrowed-down copy.
For any path that is a symbolic link, the caller later fixes up the
narrowed-down copy by unlinking the path and replacing it with a
regular file it writes out that mimics the way how "git diff"
compares symbolic links.
Let's answer "no, you do not want to copy/symlink the working tree
file" for all symbolic links from this function, as we know the
result will not be used because it will be overwritten anyway.
Incidentally, this also stops the function from feeding a symbolic
link in the working tree to hash-object, which is a wrong thing to
do to begin with. The link may be pointing at a directory, or worse
may be dangling (both would be noticed as an error). Even if the
link points at a regular file, hashing the contents of a file that
is pointed at by the link is not correct (Git hashes the contents of
the link itself, not the pointee).
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git-merge-file is documented to return one of three exit
codes:
- zero means the merge was successful
- a negative number means an error occurred
- a positive number indicates the number of conflicts
Unfortunately, this all gets stuffed into an 8-bit return
code. Which means that if you have 256 conflicts, this wraps
to zero, and the merge appears to succeed (and commits a
blob full of conflict-marker cruft!).
This patch clamps the return value to a maximum of 127,
which we should be able to safely represent everywhere. This
also leaves 128-255 for other values. Shells (and some parts
of git) will typically represent signal death as 128 plus
the signal number. And negative values are typically coerced
to an 8-bit unsigned value (so "return -1" ends up as 255).
Technically negative returns have the same problem (e.g.,
"-256" wraps back to 0), but this is not a problem in
practice, as the only negative value we use is "-1".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Editors on Windows can and do save text files with CRLF line
endings, which is the convention on the platform. We are seeing
reports that the "read" command in a port of bash to the environment
however does not strip the CRLF at the end, not adjusting for the
same convention on the platform.
This breaks the recently added sanity checks for the insn sheet fed
to "rebase -i"; instead of an empty line (hence nothing in $command),
the script was getting a lone CR in there.
Special case a lone CR and treat it the same way as an empty line to
work this around.
This patch (also) passes the test with Git for Windows, where the
issue was seen first.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare for Git on-disk repository representation to undergo
backward incompatible changes by introducing a new repository
format version "1", with an extension mechanism.
* jk/repository-extension:
introduce "preciousObjects" repository extension
introduce "extensions" form of core.repositoryformatversion
Add the "list" subcommand to "git worktree".
* mr/worktree-list:
worktree: add 'list' command
worktree: add details to the worktree struct
worktree: add a function to get worktree details
worktree: refactor find_linked_symref function
worktree: add top-level worktree.c
If one side deletes a file and the other changes its
content, we notice and report a conflict. However, if
instead of changing the content, we change only the mode,
the merge does not notice (and the mode change is silently
dropped).
The trivial index merge notices the problem and correctly
leaves the conflict in the index, but both merge-recursive
and merge-one-file will silently resolve this in favor of
the deletion. In many cases that is a sane resolution, but
we should be punting to the user whenever there is any
question. So let's detect and treat this as a conflict (in
both strategies).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script tests the filemode handling of merge-recursive,
but we do not test the same thing for merge-resolve. Let's
generalize the script a little:
1. Break out the setup steps for each test into a separate
snippet.
2. For each test, run it twice; once with "-s recursive"
and once with "-s resolve". We can avoid repeating
ourselves by adding a function.
3. Since we have a nice abstracted function, we can make
our tests more thorough by testing both directions
(change on "ours" versus "theirs").
This improves our test coverage, and will make this the
place to add more tests related to merging mode changes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The t6031 test was introduced to check filemode handling of
merge-recursive. Much later, an unrelated test was tacked on
to look at renames and d/f conflicts. This test does not
depend on anything that happened before (it actually blows
away any existing content in the test repo). Let's move it
to t3030, where there are more related tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since Git 2.0, "add -u" and "add -A" run from a subdirectory without
any pathspec mean "everything in the working tree" (before 2.0, they
were limited to the current directory). The limiting to the current
directory was implemented by inserting "." to the command line when
the end user did not give us any pathspec. At 2.0, we updated the
code to insert ":/" (instead of '.') to consider everything from the
top-level, by using a pathspec magic "top".
The call to parse_pathspec() using the command line arguments is,
however, made with PATHSPEC_PREFER_FULL option since 5a76aff1 (add:
convert to use parse_pathspec, 2013-07-14), which predates Git 2.0.
In retrospect, there was no need to turn "adding . to limit to the
directory" into "adding :/ to unlimit to everywhere" in Git 2.0;
instead we could just have done "if there is no pathspec on the
command line, just let it be". The parse_pathspec() then would give
us a pathspec that matches everything and all is well.
Incidentally such a simplification also fixes a corner case bug that
stems from the fact that ":/" does not necessarily mean any magic.
A user would say "git --literal-pathspecs add -u :/" from the
command line when she has a directory ':' and wants to add
everything in it (and she knows that her :/ will be taken as
'everything under the sun' magic pathspec unless she disables the
magic with --literal-pathspecs). The internal use of ':/' would
behave the same way as such an explicitly given ":/" when run with
"--literal-pathspecs", and will not add everything under the sun as
the code originally intended.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--reference" option is not the only way to provide a repository
to borrow objects from. A repository that borrows from another
repository can be cloned with "clone --local" and the resulting
repository will borrow from the same repository, which the user
may want to "--dissociate" from.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few test scripts around "git p4" have been improved for
portability.
* ls/p4-test-updates:
git-p4: skip t9819 test case on case insensitive file systems
git-p4: avoid "stat" command in t9815 git-p4-submit-fail
Many allocations that is manually counted (correctly) that are
followed by strcpy/sprintf have been replaced with a less error
prone constructs such as xstrfmt.
Macintosh-specific breakage was noticed and corrected in this
reroll.
* jk/war-on-sprintf: (70 commits)
name-rev: use strip_suffix to avoid magic numbers
use strbuf_complete to conditionally append slash
fsck: use for_each_loose_file_in_objdir
Makefile: drop D_INO_IN_DIRENT build knob
fsck: drop inode-sorting code
convert strncpy to memcpy
notes: document length of fanout path with a constant
color: add color_set helper for copying raw colors
prefer memcpy to strcpy
help: clean up kfmclient munging
receive-pack: simplify keep_arg computation
avoid sprintf and strcpy with flex arrays
use alloc_ref rather than hand-allocating "struct ref"
color: add overflow checks for parsing colors
drop strcpy in favor of raw sha1_to_hex
use sha1_to_hex_r() instead of strcpy
daemon: use cld->env_array when re-spawning
stat_tracking_info: convert to argv_array
http-push: use an argv_array for setup_revisions
fetch-pack: use argv_array for index-pack / unpack-objects
...
"git gc" used to barf when a symbolic ref has gone dangling
(e.g. the branch that used to be your upstream's default when you
cloned from it is now gone, and you did "fetch --prune").
* js/gc-with-stale-symref:
pack-objects: do not get distracted by broken symrefs
gc: demonstrate failure with stale remote HEAD
A recent "filter-branch --msg-filter" broke skipping of the commit
object header, which is fixed.
* jk/filter-branch-use-of-sed-on-incomplete-line:
filter-branch: remove multi-line headers in msg filter
Dirty the test worktree's root directory, as the test expects.
When testing the untracked-cache, we previously assumed that checking
out master would be sufficient to mark the mtime of the worktree's
root directory as racily-dirty. But sometimes, the checkout would
happen at 12345.999 seconds and the status at 12346.001 seconds,
meaning that the worktree's root directory would not be racily-dirty.
And since it was not truly dirty, occasionally the test would fail.
By making the root truly dirty, the test will always succeed.
Tested by running a few hundred times.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent "filter-branch --msg-filter" broke skipping of the commit
object header, which is fixed.
* jk/filter-branch-use-of-sed-on-incomplete-line:
filter-branch: remove multi-line headers in msg filter
There were some classes of errors that "git fsck" diagnosed to its
standard error that did not cause it to exit with non-zero status.
* jc/fsck-dropped-errors:
fsck: exit with non-zero when problems are found
Performance-measurement tests did not work without an installed Git.
* sb/perf-without-installed-git:
t/perf: make runner work even if Git is not installed
After "git checkout --detach", "git status" reported a fairly
useless "HEAD detached at HEAD", instead of saying at which exact
commit.
* mm/detach-at-HEAD-reflog:
status: don't say 'HEAD detached at HEAD'
t3203: test 'detached at' after checkout --detach
"git rebase -i" had a minor regression recently, which stopped
considering a line that begins with an indented '#' in its insn
sheet not a comment, which is now fixed.
* gr/rebase-i-drop-warn:
rebase-i: loosen over-eager check_bad_cmd check
rebase-i: explicitly accept tab as separator in commands
The way how --ref/--notes to specify the notes tree reference are
DWIMmed was not clearly documented.
* jk/notes-dwim-doc:
notes: correct documentation of DWIMery for notes references
The ssh transport, just like any other transport over the network,
did not clear GIT_* environment variables, but it is possible to
use SendEnv and AcceptEnv to leak them to the remote invocation of
Git, which is not a good idea at all. Explicitly clear them just
like we do for the local transport.
* jk/connect-clear-env:
git_connect: clarify conn->use_shell flag
git_connect: clear GIT_* environment for ssh
"git blame --first-parent v1.0..v2.0" was not rejected but did not
limit the blame to commits on the first parent chain.
* jk/blame-first-parent:
blame: handle --first-parent
Teach "git p4" to send large blobs outside the repository by
talking to Git LFS.
* ls/p4-lfs:
git-p4: add Git LFS backend for large file system
git-p4: add support for large file systems
git-p4: check free space during streaming
git-p4: add file streaming progress in verbose mode
git-p4: return an empty list if a list config has no values
git-p4: add gitConfigInt reader
git-p4: add optional type specifier to gitConfig reader
"git gc" used to barf when a symbolic ref has gone dangling
(e.g. the branch that used to be your upstream's default when you
cloned from it is now gone, and you did "fetch --prune").
* js/gc-with-stale-symref:
pack-objects: do not get distracted by broken symrefs
gc: demonstrate failure with stale remote HEAD
"git clone --dissociate" runs a big "git repack" process at the
end, and it helps to close file descriptors that are open on the
packs and their idx files before doing so on filesystems that
cannot remove a file that is still open.
* js/clone-dissociate:
clone --dissociate: avoid locking pack files
sha1_file.c: add a function to release all packs
sha1_file: consolidate code to close a pack's file descriptor
t5700: demonstrate a Windows file locking issue with `git clone --dissociate`
"git rebase -i" had a minor regression recently, which stopped
considering a line that begins with an indented '#' in its insn
sheet not a comment, which is now fixed.
* gr/rebase-i-drop-warn:
rebase-i: loosen over-eager check_bad_cmd check
rebase-i: explicitly accept tab as separator in commands
After "git checkout --detach", "git status" reported a fairly
useless "HEAD detached at HEAD", instead of saying at which exact
commit.
* mm/detach-at-HEAD-reflog:
status: don't say 'HEAD detached at HEAD'
t3203: test 'detached at' after checkout --detach
It was not possible to use a repository-lookalike created by "git
worktree add" as a local source of "git clone".
* nd/clone-linked-checkout:
clone: better error when --reference is a linked checkout
clone: allow --local from a linked checkout
enter_repo: allow .git files in strict mode
enter_repo: avoid duplicating logic, use is_git_directory() instead
t0002: add test for enter_repo(), non-strict mode
path.c: delete an extra space
Update "git branch" that list existing branches, using the
ref-filter API that is shared with "git tag" and "git
for-each-ref".
* kn/for-each-branch:
branch: add '--points-at' option
branch.c: use 'ref-filter' APIs
branch.c: use 'ref-filter' data structures
branch: drop non-commit error reporting
branch: move 'current' check down to the presentation layer
branch: roll show_detached HEAD into regular ref_list
branch: bump get_head_description() to the top
branch: refactor width computation
Performance-measurement tests did not work without an installed Git.
* sb/perf-without-installed-git:
t/perf: make runner work even if Git is not installed
