The shell completion (in contrib/) learned that "git pull" can take
the "--autostash" option.
* ac/complete-pull-autostash:
completion: add --autostash and --no-autostash to pull
Command line completion (in contrib/) has been taught about the
"--copy" option of "git branch".
* tz/complete-branch-copy:
completion: add '--copy' option to 'git branch'
Teach "sendemail.tocmd" to places that know about "sendemail.to",
like documentation and shell completion (in contrib/).
* rv/sendemail-tocmd-in-config-and-completion:
completion: add git config sendemail.tocmd
Documentation/config: add sendemail.tocmd to list preceding "See git-send-email(1)"
The "diff" family of commands learned to ignore differences in
carriage return at the end of line.
* jc/ignore-cr-at-eol:
diff: --ignore-cr-at-eol
xdiff: reassign xpparm_t.flags bits
Ideally we should only autocomplete if pull has --rebase since
they only work with it but could not figure out how to do that
and the error message of doing git pull --autostash points out
that you need --rebase so i guess it's good enough
Signed-off-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 52d59cc645 (branch: add a --copy (-c) option to go with --move (-m),
2017-06-18), `git branch` learned a `--copy` option. Include it when
providing command completions.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mailing address for the FSF has changed over the years. Rather than
updating the address across all files, refer readers to gnu.org, as the
GNU GPL documentation now suggests for license notices. The mailing
address is retained in the full license files (COPYING and LGPL-2.1).
The old address is still present in t/diff-lib/COPYING. This is
intentional, as the file is used in tests and the contents are not
expected to change.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new option --ignore-cr-at-eol tells the diff machinery to treat a
carriage-return at the end of a (complete) line as if it does not
exist.
Just like other "--ignore-*" options to ignore various kinds of
whitespace differences, this will help reviewing the real changes
you made without getting distracted by spurious CRLF<->LF conversion
made by your editor program.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
[jch: squashed in command line completion by Dscho]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A hook script that is set unexecutable is simply ignored. Git
notifies when such a file is ignored, unless the message is
squelched via advice.ignoredHook configuration.
* dm/run-command-ignored-hook-advise:
run-command: add hint when a hook is ignored
In the commits 1fc458d9 (builtin/checkout: add --recurse-submodules
switch, 2017-03-14), 08d595dc (checkout: add --ignore-skip-worktree-bits
in sparse checkout mode, 2013-04-13) and 32669671 (checkout: introduce
--detach synonym for "git checkout foo^{commit}", 2011-02-08) checkout
gained new flags but the completion was not updated, although these flags
are useful completions. Add them.
The flags --force and --ignore-other-worktrees are not added as they are
potentially dangerous.
The flags --progress and --no-progress are only useful for scripting and are
therefore also not included.
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an hook is present but the file is not set as executable then git will
ignore the hook.
For now this is silent which can be confusing.
This commit adds this warning to improve the situation:
hint: The 'pre-commit' hook was ignored because it's not set as executable.
hint: You can disable this warning with `git config advice.ignoredHook false`
To allow the old use-case of enabling/disabling hooks via the executable flag a
new setting is introduced: advice.ignoredHook.
Signed-off-by: Damien Marié <damien@dam.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the flags for broken and dirty were implemented in
b0176ce6b5 (builtin/describe: introduce --broken flag, 2017-03-21)
and 9f67d2e827 (Teach "git describe" --dirty option, 2009-10-21)
the completion was not updated, although these flags are useful
completions. Add them.
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-email" learned to overcome some SMTP server limitation
that does not allow many pieces of e-mails to be sent over a single
session.
* xz/send-email-batch-size:
send-email: --batch-size to work around some SMTP server limit
Some email servers (e.g. smtp.163.com) limit the number emails to be
sent per session (connection) and this will lead to a faliure when
sending many messages.
Teach send-email to disconnect after sending a number of messages
(configurable via the --batch-size=<num> option), wait for a few
seconds (configurable via the --relogin-delay=<seconds> option) and
reconnect, to work around such a limit.
Also add two configuration variables to give these options the default.
Note:
We will use this as a band-aid for now, but in the longer term, we
should look at and react to the SMTP error code from the server;
Xianqiang reports that 450 and 451 are returned by problematic
servers.
cf. https://public-inbox.org/git/7993e188.d18d.15c3560bcaf.Coremail.zxq_yx_007@163.com/
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing completions for git config advice:
* advice.amWorkDir
* advice.pushAlreadyExists
* advice.pushFetchFirst
* advice.pushNeedsForce
* advice.pushNonFFCurrent
* advice.pushNonFFMatching
* advice.pushUpdateRejected
* advice.rmHints
* advice.statusUoption
Remove completion for git config advice.pushNonFastForward,
since it was renamed to pushUpdateRejected in 1184564eac.
The config still works, but is no longer part of the documentation.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing completions for git config core:
* core.checkStat
* core.commentChar
* core.hideDotFiles
* core.hooksPath
* core.packedRefsTimeout
* core.precomposeUnicode
* core.protectHFS
* core.protectNTFS
* core.splitIndex
* core.sshCommand
Note that some configs are only used for some platforms
(hideDotFiles on Windows and precomposeUnicode on Mac).
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure our tests would pass when the sources are checked out
with "platform native" line ending convention by default on
Windows. Some "text" files out tests use and the test scripts
themselves that are meant to be run with /bin/sh, ought to be
checked out with eol=LF even on Windows.
* js/eol-on-ourselves:
t4051: mark supporting files as requiring LF-only line endings
Fix the remaining tests that failed with core.autocrlf=true
t3901: move supporting files into t/t3901/
completion: mark bash script as LF-only
git-new-workdir: mark script as LF-only
Fix build with core.autocrlf=true
When introducing git stash push in f5727e26e4 ("stash: introduce push
verb", 2017-02-19), I forgot to add it to the completion code. Add it
now.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" learned the "--no-tags" option not to fetch all tags
initially, and also set up the tagopt not to follow any tags in
subsequent fetches.
* ab/clone-no-tags:
tests: rename a test having to do with shallow submodules
clone: add a --no-tags option to clone without tags
tests: change "cd ... && git fetch" to "cd &&\n\tgit fetch"
The colors in which "git status --short --branch" showed the names
of the current branch and its remote-tracking branch are now
configurable.
* sk/status-short-branch-color-config:
status: add color config slots for branch info in "--short --branch"
status: fix missing newline when comment chars are disabled
Without this change, the completion script does not work, as Bash expects
its scripts to have line feeds as end-of-line markers (this is
particularly prominent in quoted multi-line strings, where carriage
returns would slip into the strings as verbatim characters otherwise).
This change is required to let t9902-completion pass when Git's source
code is checked out with `core.autocrlf = true`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Completion for "git checkout <branch>" that auto-creates the branch
out of a remote tracking branch can now be disabled, as this
completion often gets in the way when completing to checkout an
existing local branch that happens to share the same prefix with
bunch of remote tracking branches.
* jk/complete-checkout-sans-dwim-remote:
completion: optionally disable checkout DWIM
Add a --no-tags option to clone without fetching any tags.
Without this change there's no easy way to clone a repository without
also fetching its tags.
When supplying --single-branch the primary remote branch will be
cloned, but in addition tags will be followed & retrieved. Now
--no-tags can be added --single-branch to clone a repository without
tags, and which only tracks a single upstream branch.
This option works without --single-branch as well, and will do a
normal clone but not fetch any tags.
Many git commands pay some fixed overhead as a function of the number
of references. E.g. creating ~40k tags in linux.git will cause a
command like `git log -1 >/dev/null` to run in over a second instead
of in a matter of milliseconds, in addition numerous other things will
slow down, e.g. "git log <TAB>" with the bash completion will slowly
show ~40k references instead of 1.
The user might want to avoid all of that overhead to simply use a
repository like that to browse the "master" branch, or something like
a CI tool might want to keep that one branch up-to-date without caring
about any other references.
Without this change the only way of accomplishing this was either by
manually tweaking the config in a fresh repository:
git init git &&
cat >git/.git/config <<EOF &&
[remote "origin"]
url = git@github.com:git/git.git
tagOpt = --no-tags
fetch = +refs/heads/master:refs/remotes/origin/master
[branch "master"]
remote = origin
merge = refs/heads/master
EOF
cd git &&
git pull
Which requires hardcoding the "master" name, which may not be the main
--single-branch would have retrieved, or alternatively by setting
tagOpt=--no-tags right after cloning & deleting any existing tags:
git clone --single-branch git@github.com:git/git.git &&
cd git &&
git config remote.origin.tagOpt --no-tags &&
git tag -l | xargs git tag -d
Which of course was also subtly buggy if --branch was pointed at a
tag, leaving the user in a detached head:
git clone --single-branch --branch v2.12.0 git@github.com:git/git.git &&
cd git &&
git config remote.origin.tagOpt --no-tags &&
git tag -l | xargs git tag -d
Now all this complexity becomes the much simpler:
git clone --single-branch --no-tags git@github.com:git/git.git
Or in the case of cloning a single tag "branch":
git clone --single-branch --branch v2.12.0 --no-tags git@github.com:git/git.git
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add color config slots to be used in the status short-format when
displaying local and remote tracking branch information.
[jc: rebased on top of Peff's fix to 'git status' and tweaked the
test to check both local and remote-tracking branch output]
Signed-off-by: Stephen Kent <smkent@smkent.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we complete branch names for "git checkout", we also
complete remote branch names that could trigger the DWIM
behavior. Depending on your workflow and project, this can
be either convenient or annoying.
For instance, my clone of gitster.git contains 74 local
"jk/*" branches, but origin contains another 147. When I
want to checkout a local branch but can't quite remember the
name, tab completion shows me 251 entries. And worse, for a
topic that has been picked up for pu, the upstream branch
name is likely to be similar to mine, leading to a high
probability that I pick the wrong one and accidentally
create a new branch.
This patch adds a way for the user to tell the completion
code not to include DWIM suggestions for checkout. This can
already be done by typing:
git checkout --no-guess jk/<TAB>
but that's rather cumbersome. The downside, of course, is
that you no longer get completion support when you _do_ want
to invoke the DWIM behavior. But depending on your workflow,
that may not be a big loss (for instance, in git.git I am
much more likely to want to detach, so I'd type "git
checkout origin/jk/<TAB>" anyway).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the completion of "push --delete <remote> <ref>" to complete
refs on that <remote>, not all refs.
Before this cloning git.git and doing "git push --delete origin
p<TAB>" will complete nothing, since a fresh clone of git.git will
have no "pu" branch, whereas origin/p<TAB> will uselessly complete
origin/pu, but fully qualified references aren't accepted by
"--delete".
Now p<TAB> will complete as "pu". The completion of giving --delete
later, e.g. "git push origin --delete p<TAB>" remains unchanged, this
is a bug, but is a general existing limitation of the bash completion,
and not how git-push is documented, so I'm not fixing that case, but
adding a failing TODO test for it.
The testing code was supplied by SZEDER Gábor in
<20170421122832.24617-1-szeder.dev@gmail.com> with minor setup
modifications on my part.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Test-code-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git tag/branch/for-each-ref" family of commands long allowed to
filter the refs by "--contains X" (show only the refs that are
descendants of X), "--merged X" (show only the refs that are
ancestors of X), "--no-merged X" (show only the refs that are not
ancestors of X). One curious omission, "--no-contains X" (show
only the refs that are not descendants of X) has been added to
them.
* ab/ref-filter-no-contains:
tag: add tests for --with and --without
ref-filter: reflow recently changed branch/tag/for-each-ref docs
ref-filter: add --no-contains option to tag/branch/for-each-ref
tag: change --point-at to default to HEAD
tag: implicitly supply --list given another list-like option
tag: change misleading --list <pattern> documentation
parse-options: add OPT_NONEG to the "contains" option
tag: add more incompatibles mode tests
for-each-ref: partly change <object> to <commit> in help
tag tests: fix a typo in a test description
tag: remove a TODO item from the test suite
ref-filter: add test for --contains on a non-commit
ref-filter: make combining --merged & --no-merged an error
tag doc: reword --[no-]merged to talk about commits, not tips
tag doc: split up the --[no-]merged documentation
tag doc: move the description of --[no-]merged earlier
Command line completion updates.
* sg/completion-ctags:
completion: offer ctags symbol names for 'git log -S', '-G' and '-L:'
completion: extract completing ctags symbol names into helper function
completion: put matching ctags symbol names directly into COMPREPLY
The refs completion for large number of refs has been sped up,
partly by giving up disambiguating ambiguous refs and partly by
eliminating most of the shell processing between 'git for-each-ref'
and 'ls-remote' and Bash's completion facility.
* sg/completion-refs-speedup:
completion: speed up branch and tag completion
completion: fill COMPREPLY directly when completing fetch refspecs
completion: fill COMPREPLY directly when completing refs
completion: let 'for-each-ref' sort remote branches for 'checkout' DWIMery
completion: let 'for-each-ref' filter remote branches for 'checkout' DWIMery
completion: let 'for-each-ref' strip the remote name from remote branches
completion: let 'for-each-ref' and 'ls-remote' filter matching refs
completion: don't disambiguate short refs
completion: don't disambiguate tags and branches
completion: support excluding full refs
completion: support completing fully qualified non-fast-forward refspecs
completion: support completing full refs after '--option=refs/<TAB>'
completion: wrap __git_refs() for better option parsing
completion: remove redundant __gitcomp_nl() options from _git_commit()
Change the tag, branch & for-each-ref commands to have a --no-contains
option in addition to their longstanding --contains options.
This allows for finding the last-good rollout tag given a known-bad
<commit>. Given a hypothetically bad commit cf5c7253e0, the git
version to revert to can be found with this hacky two-liner:
(git tag -l 'v[0-9]*'; git tag -l --contains cf5c7253e0 'v[0-9]*') |
sort | uniq -c | grep -E '^ *1 ' | awk '{print $2}' | tail -n 10
With this new --no-contains option the same can be achieved with:
git tag -l --no-contains cf5c7253e0 'v[0-9]*' | sort | tail -n 10
As the filtering machinery is shared between the tag, branch &
for-each-ref commands, implement this for those commands too. A
practical use for this with "branch" is e.g. finding branches which
were branched off between v2.8.0 and v2.10.0:
git branch --contains v2.8.0 --no-contains v2.10.0
The "describe" command also has a --contains option, but its semantics
are unrelated to what tag/branch/for-each-ref use --contains for. A
--no-contains option for "describe" wouldn't make any sense, other
than being exactly equivalent to not supplying --contains at all,
which would be confusing at best.
Add a --without option to "tag" as an alias for --no-contains, for
consistency with --with and --contains. The --with option is
undocumented, and possibly the only user of it is
Junio (<xmqqefy71iej.fsf@gitster.mtv.corp.google.com>). But it's
trivial to support, so let's do that.
The additions to the the test suite are inverse copies of the
corresponding --contains tests. With this change --no-contains for
tag, branch & for-each-ref is just as well tested as the existing
--contains option.
In addition to those tests, add a test for "tag" which asserts that
--no-contains won't find tree/blob tags, which is slightly
unintuitive, but consistent with how --contains works & is documented.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like in the case of search patterns for 'git grep', see 29eec71f2
(completion: match ctags symbol names in grep patterns, 2011-10-21)),
a common thing to look for using 'git log -S', '-G' and '-L:' is the
name of a symbol.
Teach the completion for 'git log' to offer ctags symbol names after
these options, both in stuck and in unstuck forms.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit doubled the number of __git_match_ctag()'s
positional parameters, and, to keep the position of existing
parameters for the sake of backwards compatibility, the prefix,
current word and suffix parameters ended up in different order than in
other functions accepting the same parameters. Then there is a
condition checking the existence of the tag file before invoking this
function.
We could still live with this if there were only a single callsite,
but the next commit will add a few more, so it's worth providing a
cleaner interface.
Add the wrapper function __git_complete_symbol(), which encompasses
the condition for checking the presence of the tag file and filling
COMPREPLY, and accepts '--opt=val'-style options with default values
that keep callsites simpler.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The one-liner awk script in __git_match_ctag() listing ctags symbol
names for 'git grep <TAB>' is already smart enough to list only symbol
names matching the current word to be completed.
Extend this helper function to accept prefix and suffix parameters to
be prepended and appended, respectively, to each listed symbol name in
the awk script, so its output won't require any additional processing
or filtering in the completion script before being handed over to
Bash. Use the faster __gitcomp_direct() helper instead of
__gitcomp_nl() to fill the fully processed matching symbol names into
Bash's COMPREPLY array.
Right after 'git grep <TAB>' in current git.git with 14k+ symbol names
in the tag file, best of five:
Before:
$ time __gitcomp_nl "$(__git_match_ctag "" tags)"
real 0m0.178s
user 0m0.176s
sys 0m0.000s
After:
$ time __gitcomp_direct "$(__git_match_ctag "" tags "" " ")"
real 0m0.058s
user 0m0.048s
sys 0m0.008s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modify __git_heads() and __git_tags() and the few callsites they have,
so we can let 'git for-each-ref' do all the hard work and these
functions' output won't need any further processing or filtering
before being handed over to Bash, resulting in faster branch and tag
completion. These are some of the same tricks used in the previous
commits to speed up refs completion, namely:
- Extend both functions to accept prefix, current word and suffix
positional parameters, all optional and all empty by default to
keep the parameterless behavior unaltered.
- Specify appropriate globbing patterns to 'git for-each-ref' to
list only branches or tags matching the given current word
parameter.
- Modify the 'git for-each-ref --format=<...>' to include the given
prefix and suffix.
- Adjust all callsites to specify the proper prefix, current word
and suffix parameters, and to fill COMPREPLY using
__gitcomp_direct().
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __git_complete_fetch_refspecs() has to iterate over __git_refs()'s
output anyway to turn the listed matching refs into refspecs, and it
knows about the prefix and suffix that has to be added to each
refspec.
Modify this function to add the prefix and suffix to each refspec
while iterating and feed the result, since it doesn't need further
processing, to the new __gitcomp_direct() helper added in the previous
commit, because it should be faster when there are a lot of refspecs
to list.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__gitcomp_nl() iterates over all the possible completion words it gets
as argument
- filtering matching words,
- appending a trailing space to each matching word (in all but two
cases),
- prepending a prefix to each matching word (when completing words
after e.g. '--option=<TAB>' or 'master..<TAB>'), and
- adding each matching word to the COMPREPLY array.
This takes a while when a lot of refs are passed to __gitcomp_nl().
The previous changes in this series ensure that __git_refs() lists
only refs matching the current word to be completed, making a second
filtering in __gitcomp_nl() redundant.
Adding the necessary prefix and suffix could be done in __git_refs()
as well:
- When refs come from 'git for-each-ref', then that prefix and
suffix could be added much more efficiently using a 'git
for-each-ref' format containing said prefix and suffix. Care
should be taken, though, because that prefix might contain
'for-each-ref' format specifiers as part of the left hand side of
a '..' range or '...' symmetric difference notation or
fetch/push/etc. refspec, e.g. 'git log "evil-%(refname)..br<TAB>'.
Doubling every '%' in the prefix will prevent 'git for-each-ref'
from interpolating any of those contained specifiers.
- When refs come from 'git ls-remote', then that prefix and suffix
can be added in the shell loop that has to process 'git
ls-remote's output anyway.
- Finally, the prefix and suffix can be added to that handful of
potentially matching symbolic and pseudo refs right away in the
shell loop listing them.
And then all what is still left to do is to assign a bunch of
newline-separated words to a shell array, which can be done without a
shell loop iterating over each word, basically making all of
__gitcomp_nl() unnecessary for refs completion.
Add the helper function __gitcomp_direct() to fill the COMPREPLY array
with prefiltered and preprocessed words without any additional
processing, without a shell loop, with just one single compound
assignment. Modify __git_refs() to accept prefix and suffix
parameters and add them to each and every listed ref as described
above. Modify __git_complete_refs() to pass the prefix and suffix
parameters to __git_refs() and to feed __git_refs()'s output to
__gitcomp_direct() instead of __gitcomp_nl().
This speeds up refs completion when there are a lot of refs matching
the current word to be completed. Listing all branches for completion
in a repo with 100k local branches, all packed, best of five:
On Linux, near the beginning of this series, for reference:
$ time __git_complete_refs
real 0m2.028s
user 0m1.692s
sys 0m0.344s
Before this patch:
real 0m1.135s
user 0m1.112s
sys 0m0.024s
After:
real 0m0.367s
user 0m0.352s
sys 0m0.020s
On Windows, near the beginning:
real 0m13.078s
user 0m1.609s
sys 0m0.060s
Before this patch:
real 0m2.093s
user 0m1.641s
sys 0m0.060s
After:
real 0m0.683s
user 0m0.203s
sys 0m0.076s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When listing unique remote branches for 'git checkout's tracking
DWIMery, __git_refs() runs the classic '... |sort |uniq -u' pattern to
filter out duplicate remote branches.
Let 'git for-each-ref' do the sorting, sparing the overhead of
fork()+exec()ing 'sort' and a stage in the pipeline where potentially
relatively large amount of data can be passed between two subsequent
pipeline stages.
This speeds up refs completion for 'git checkout' a bit when a lot of
remote branches match the current word to be completed. Listing a
single local and 100k remote branches, all packed, best of five:
On Linux, before:
$ time __git_complete_refs --track
real 0m1.856s
user 0m1.816s
sys 0m0.060s
After:
real 0m1.550s
user 0m1.512s
sys 0m0.060s
On Windows, before:
real 0m3.128s
user 0m2.155s
sys 0m0.183s
After:
real 0m2.781s
user 0m1.826s
sys 0m0.136s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
