* jl/test-lint-scripts:
t/Makefile: always test all lint targets when running tests
t/Makefile: check helper scripts for non-portable shell commands too
"filter-branch" left an empty single-parent commit that results when
all parents of a merge commit gets mapped to the same commit, even
under "--prune-empty".
* cb/filter-branch-prune-empty-degenerate-merges:
filter-branch: eliminate duplicate mapped parents
Merging changes into a file that ends in an incomplete line made the
last line into a complete one, even when the other branch did not
change anything around the end of file.
* mk/merge-incomplete-files:
git-merge-file: do not add LF at EOF while applying unrelated change
t6023-merge-file.sh: fix and mark as broken invalid tests
An experiment to use two files (the base file and incremental
changes relative to it) to represent the index to reduce I/O cost
of rewriting a large index when only small part of the working tree
changes.
* nd/split-index: (32 commits)
t1700: new tests for split-index mode
t2104: make sure split index mode is off for the version test
read-cache: force split index mode with GIT_TEST_SPLIT_INDEX
read-tree: note about dropping split-index mode or index version
read-tree: force split-index mode off on --index-output
rev-parse: add --shared-index-path to get shared index path
update-index --split-index: do not split if $GIT_DIR is read only
update-index: new options to enable/disable split index mode
split-index: strip pathname of on-disk replaced entries
split-index: do not invalidate cache-tree at read time
split-index: the reading part
split-index: the writing part
read-cache: mark updated entries for split index
read-cache: save deleted entries in split index
read-cache: mark new entries for split index
read-cache: split-index mode
read-cache: save index SHA-1 after reading
entry.c: update cache_changed if refresh_cache is set in checkout_entry()
cache-tree: mark istate->cache_changed on prime_cache_tree()
cache-tree: mark istate->cache_changed on cache tree update
...
Test that the revert command updates the work tree as expected (for
submodule changes which don't result in conflicts). Add a helper function
to first revert the checked out target commit to make the last revert
produce the to-be-tested work tree.
Set the KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT and
KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR switches to
document that revert has the similar failures.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the stash apply command updates the work tree as expected for
changes which don't result in conflicts. To make that work add a helper
function that uses read-tree to apply the changes of the target commit
to the work tree, then stashes these changes and at last applies that
stash.
Implement the KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES switch
and reuse two other already present switches to expect the known
failure that stash does ignore submodule changes.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the am command updates the work tree as expected (for submodule
changes which don't result in conflicts). To make that work add two
helper functions that use format-patch to create the input for am.
Add the KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES
switch to expect the known failure that --no-ff merges attempt to merge
the new files in the former submodule directory with those of the removed
submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the cherry-pick command updates the work tree as expected (for
submodule changes which don't result in conflicts).
Set KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES
and KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR to
document that cherry-pick has the same --no-ff known failures merge has.
Implement the KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT switch to expect
the known failure that while cherry picking just a SHA-1 update for an
ignored submodule the commit incorrectly fails with "The previous
cherry-pick is now empty, possibly due to conflict resolution.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the pull command updates the work tree as expected (for
submodule changes which don't result in conflicts) when used without
arguments or with the '--ff', '--ff-only' and '--no-ff' flag each. Add
helper functions to reset the branch to be updated to to the current
HEAD so that pull is doing the transition from HEAD to the given branch.
Set KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES
and KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR to
document that pull has the same --no-ff known failures merge has.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the rebase command updates the work tree as expected for
changes which don't result in conflicts. To make that work add two
helper functions that add a commit only touching files and then
revert it. This allows to rebase the target commit over these two
and to compare the result.
Set KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR to
document that "replace directory with submodule" fails for an
interactive rebase because a directory "sub1" already exists.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the merge command updates the work tree as expected (for
submodule changes which don't result in conflicts) when used without
arguments or with the '--ff', '--ff-only' and '--no-ff' flag.
Implement the KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR
switch to expect the known failure that --no-ff merges do not create the
empty submodule directory.
The KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES
switch is also implemented to expect the known failure that --no-ff
merges attempt to merge the new files in the former submodule directory
with those of the removed submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the bisect command updates the work tree as expected. To make
that work with the new submodule test framework a git_bisect helper
function is added. This adds a commit after the one given to be switched
to and makes that one the bad commit. The starting point is then given to
bisect as the good commit which makes bisect change the work tree to the
commit in between, which is the commit given.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the reset command updates the work tree as expected for changes
with '--keep', '--merge' (for changes which don't result in conflicts) and
'--hard'.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the read-tree command updates the work tree as expected for
changes which don't result in conflicts with the '-m' and '--reset' flag.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the apply command updates the work tree as expected for the
'--index' and the '--3way' options (for submodule changes which don't
result in conflicts).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the checkout command updates the work tree as expected with
and without the '-f' flag.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add this test library to simplify covering all combinations of submodule
update scenarios without having to add those to a test of each work tree
manipulating command over and over again.
The functions test_submodule_switch() and test_submodule_forced_switch()
are intended to be called from a test script with a single argument. This
argument is either a work tree manipulating command (including any command
line options) or a function (when more than a single git command is needed
to switch work trees from the current HEAD to another commit). This
command (or function) is passed a target branch as argument. The two new
functions check that each submodule transition is handled as expected,
which currently means that submodule work trees are not affected until
"git submodule update" is called. The "forced" variant is for commands
using their '-f' or '--hard' option and expects them to overwrite local
modifications as a result. Each of these two functions contains 14
tests_expect_* calls.
Calling one of these test functions the first time creates a repository
named "submodule_update_repo". At first it contains two files, then a
single submodule is added in another commit followed by commits covering
all relevant submodule modifications. This repository is newly cloned into
the "submodule_update" for each test_expect_* to avoid interference
between different parts of the test functions (some to-be-tested commands
also manipulate refs along with the work tree, e.g. "git reset").
Follow-up commits will then call these two test functions for all work
tree manipulating commands (with a combination of all their options
relevant to what they do with the work tree) making sure they work as
expected. Later this test library will be extended to cover merges
resulting in conflicts too. Also it is intended to be easily extendable
for the recursive update functionality, where even more combinations of
submodule modifications have to be tested for.
This version documents two bugs in current Git with expected failures:
*) When a submodule is replaced with a tracked file of the same name the
submodule work tree including any local modifications (and even the
whole history if it uses a .git directory instead of a gitfile!) is
silently removed.
*) Forced work tree updates happily manipulate files in the directory of a
submodule that has just been removed in the superproject (but is of
course still present in the work tree due to the way submodules are
currently handled). This becomes dangerous when files in the submodule
directory are overwritten by files from the new superproject commit, as
any modifications to the submodule files will be lost) and is expected
to also destroy history in the - admittedly unlikely case - the new
commit adds a file named ".git" to the submodule directory.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only the two targets "test-lint-duplicates" and "test-lint-executable" are
currently executed when running the test target. This was done on purpose
when the TEST_LINT variable was added in 81127d74 to avoid twisted shell
scripting by developers only to avoid false positives that might result
from the rather simple minded tests, e.g. test-lint-shell-syntax. But it
looks like it might be better to include all lint tests to help developers
to detect non portable shell constructs before the patch is sent to the
list and reviewed there.
Change the TEST_LINT variable to run all lint test unless the TEST_LINT
variable is overridden. If we hit false positives more often than helping
developers to avoid non-portable code (or add less accurate or slow tests
later) we could still fall back to exclude them like 81127d74 proposed.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently only the "t[0-9][0-9][0-9][0-9]-*.sh" scripts are tested for
shell incompatibilities using the check-non-portable-shell.pl script. This
makes it easy to miss non-POSIX constructs added to one of the t/*lib*.sh
helper scripts, as they aren't automatically detected.
Fix that by adding a THELPERS variable containing all shell scripts that
aren't tests and add these to the "test-lint-shell-syntax" target too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes to a topic that is already in 'master'.
* dt/refs-check-refname-component-sse-fix:
refs: fix valgrind suppression file
refs.c: handle REFNAME_REFSPEC_PATTERN at end of page
Add 'verify-commit' to be used in a way similar to 'verify-tag' is
used. Further work on verifying the mergetags might be needed.
* mg/verify-commit:
t7510: test verify-commit
t7510: exit for loop with test result
verify-commit: scriptable commit signature verification
gpg-interface: provide access to the payload
gpg-interface: provide clear helper for struct signature_check
* jk/pretty-G-format-fixes:
move "%G" format test from t7510 to t6006
pretty: avoid reading past end-of-string with "%G"
t7510: check %G* pretty-format output
t7510: test a commit signed by an unknown key
t7510: use consistent &&-chains in loop
t7510: stop referring to master in later tests
The git log --graph --show-signature command incorrectly indents the gpg
information about signed commits and merged signed tags. It does not
follow the level of indentation of the current commit.
Example of garbled output:
$ git log --show-signature --graph
* commit 258e0a237cb69aaa587b0a4fb528bb0316b1b776
|\ gpg: Signature made Mon, Jun 30, 2014 13:22:33 EDT using RSA key ID DA08
gpg: Good signature from "Jason Pyeron <jpye...@pdinc.us>"
Merge: 727c355 1ca13ed
| | Author: Jason Pyeron <jpye...@pdinc.us>
| | Date: Mon Jun 30 13:22:29 2014 -0400
| |
| | Merge of 1ca13ed2271d60ba9 branch - rebranding
| |
| * commit 1ca13ed2271d60ba93d40bcc8db17ced8545f172
| | gpg: Signature made Mon, Jun 23, 2014 9:45:47 EDT using RSA key ID DD37
gpg: Good signature from "Stephen Robert Guglielmo <s...@guglielmo.us>"
gpg: aka "Stephen Robert Guglielmo <srguglie...@gmail.com>"
Author: Stephen R Guglielmo <s...@guglielmo.us>
| | Date: Mon Jun 23 09:45:27 2014 -0400
| |
| | Minor URL updates
In log-tree.c modify show_sig_lines() function to call graph_show_oneline()
after each line of gpg information it has printed in order to preserve
the level of indentation for the next output line.
Reported-by: Jason Pyeron <jpyeron@pdinc.us>
Signed-off-by: Zoltan Klinger <zoltan.klinger@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add all of the ways in which check_refname_format violates valgrind's
expectations to the valgrind suppression file; remove an assumption about
the call chain of check_refname_format from same.
Signed-off-by: David Turner <dturner@twitter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically there are 3 different parameters controlling how line endings
are handled by Git:
- core.autocrlf
- core.eol
- the "text" attribute in .gitattributes
There are different types of content:
- (1) Files with only LF
- (2) Files with only CRLF
- (3) Files with mixed LF and CRLF
- (4) Files with LF and/or CRLF with CR not followed by LF
- (5) Files which are binary (e.g. have NUL bytes)
Recently the question came up, how files with mixed EOLs are handled by Git
(and libgit2) when they are checked out and core.autocrlf=true.
See
http://git.661346.n2.nabble.com/The-different-EOL-behavior-between-libgit2-based-software-and-official-Git-td7613670.html#a7613801
Add the EXPENSIVE t0027-auto-crlf.sh to test all combination of files
and parameters for both "git add/commit" and "git checkout".
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current test files are named one, two and three.
Make it clearer what the tests do and rename them into
LFonly, CRLFonly and LFwithNUL.
After the renaming we can see easier that we may want more test cases
for 2 types of files:
- files which have mixed LF and CRLF line endings,
- files which have mixed LF and CR line endings.
See commit fd6cce9e, "Add per-repository eol normalization" and
"the new safer autocrlf handling" in convert.c
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the whole directory of test files at once using git add instead of
calling git update-index on each of them and use git commit instead of
the plumbing commands write-tree, update-ref and commit-tree to build
the commit. This simplifies the code considerably.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --skip" did not work well when it stopped due to a
conflict twice in a row.
* bc/fix-rebase-merge-skip:
rebase--merge: fix --skip with two conflicts in a row
We create a directory that cannot be removed, confirm that
it cannot be removed, and then fix it like:
chmod 0 foo &&
test_must_fail git clean -d -f &&
chmod 755 foo
If the middle step fails but leaves the directory (e.g., the
bug is that clean does not notice the failure), this
pollutes the test repo with an unremovable directory. Not
only does this cause further tests to fail, but it means
that "rm -rf" fails on the whole trash directory, and the
user has to intervene manually to even re-run the test script.
We can bump the "chmod 755" recovery to a test_when_finished
block to be sure that it always runs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When multiple parents of a merge commit get mapped to the same
commit, filter-branch used to pass all instances of the parent
commit to the parent and commit filters and to "git commit-tree" or
"git_commit_non_empty_tree".
This can often happen when extracting a small project from a large
repository; merges can join history with no commits on any branch
which affect the paths being retained. Once the intermediate
commits have been filtered out, all the immediate parents of the
merge commit can end up being mapped to the same commit - either the
original merge-base or an ancestor of it.
"git commit-tree" would display an error but write the commit with
the normalized parents in any case. "git_commit_non_empty_tree"
would fail to notice that the commit being made was in fact a
non-merge commit and would retain it even if a further pass with
"--prune-empty" would discard the commit as empty.
Ensure that duplicate parents are pruned before the parent filter to
make "--prune-empty" idempotent, removing all empty non-merge
commits in a singe pass.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If 'current-file' does not contain LF at EOF, and change between
'base-file' and 'other-file' does not change any line close to EOF, the
3-way merge should not add LF to EOF. This is what 'diff3 -m' does, and
seems to be a reasonable expectation.
The change which introduced the behavior is cd1d61c44f. It always calls
function xdl_recs_copy() for sides with add_nl == 1. In fact, it looks
like the only case when this is needed is when 2 files are being
union-merged, and they do not have LF at EOF (strictly speaking, the
first of them).
Add tests:
* "merge without conflict (missing LF at EOF, away from change in the
other file)" and "merge does not add LF away of change", to demonstrate
the changed behavior.
* "conflict at EOF without LF resolved by --union", to verify that the
union-merge at the end inerts newline between versions.
* some more tests which I felt like not covering the functionality well
Signed-off-by: Max Kirillov <max@max630.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests "merge without conflict (missing LF at EOF" and "merge result
added missing LF" are meaningless - the first one is identical to
"merge without conflict" and the second compares results of those
identical tests, which are always same.
This has been so since their addition in ba1f5f3537. Probably "new4.txt"
was meant to be used instead of "new2.txt". Unfortunately, the current
merge-file breaks with new4 - conflict is reported. They also fail at
that revision if fixed.
Fix the file reference to "new4.txt" and mark the tests as failing -
they look like legitimate expectations, just not satisfied at time
being.
Signed-off-by: Max Kirillov <max@max630.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final test in t7510 checks that "--format" placeholders
that look similar to GPG placeholders (but that we don't
actually understand) are passed through. That test was
placed in t7510, since the other GPG placeholder tests are
there. However, it does not have a GPG prerequisite, because
it is not actually checking any signed commits.
This causes the test to erroneously fail when gpg is not
installed on a system, however. Not because we need signed
commits, but because we need _any_ commit to run "git log".
If we don't have gpg installed, t7510 doesn't create any
commits at all.
We can fix this by moving the test into t6006. This is
arguably a better place anyway, because it is where we test
most of the other placeholders (we do not test GPG
placeholders there because of the infrastructure needed to
make signed commits).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some subcommands do not want to be aliased because of the side
effects that happens while the definitions of the aliases are looked
up from configuration system.
* nd/init-restore-env:
git potty: restore environments after alias expansion
Recent updates to "git repack" started to duplicate objects that
are in packfiles marked with .keep flag into the new packfile by
mistake.
* jk/repack-pack-keep-objects:
repack: s/write_bitmap/&s/ in code
repack: respect pack.writebitmaps
repack: do not accidentally pack kept objects by default
"git status" (and "git commit") behaved as if changes in a modified
submodule are not there if submodule.*.ignore configuration is set,
which was misleading. The configuration is only to unclutter diff
output during the course of development, and should not to hide
changes in the "status" output to cause the users forget to commit
them.
* jl/status-added-submodule-is-never-ignored:
commit -m: commit staged submodules regardless of ignore config
status/commit: show staged submodules regardless of ignore config
"git show -s" (i.e. show log message only) used to incorrectly emit
an extra blank line after a merge commit.
* mk/show-s-no-extra-blank-line-for-merges:
git-show: fix 'git show -s' to not add extra terminator after merge commit
