git-am and git-rebase are talkative scripts. Teach them to be quiet when
told, allowing them to speak only when they fail or experience errors.
The quiet option is maintained when git-am or git-rebase fails to apply
a patch. This means subsequent --resolved, --continue, --skip, --abort
invocations will be quiet if the original invocation was quiet.
Drop a handful of >&2 redirection; the rest of the program sends all the
info messages to stdout, not to stderr.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-pack runs pack-objects, which generates progress indicator output
on its stderr. If the client requests a sideband, this indicator is sent
to the client; but if it did not, then the progress is written to
upload-pack's own stderr.
If upload-pack is itself run from git-daemon (and if the client did not
request a sideband) the progress indicator never reaches the client and it
need not be generated in the first place. With this patch the progress
indicator is suppressed in this situation.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git-daemon is run with --detach or --inetd, then stderr is explicitly
redirected to /dev/null. But notice that the service programs were spawned
via execl_git_cmd(), in particular, the stderr channel is inherited from
the daemon. This means that errors that the programs wrote to stderr (for
example, via die()), went to /dev/null.
This patch arranges that the daemon does not merely exec the service
program, but forks it and monitors stderr of the child; it writes the
errors that it produces to the daemons log via logerror().
A consequence is that the daemon process remains in memory for the full
duration of the service program, but this cannot be avoided.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a configuration option, http.sslCertPasswordProtected, and associated
environment variable, GIT_SSL_CERT_PASSWORD_PROTECTED, to enable SSL client
certificate password prompt from within git. If this option is false and
if the environment variable does not exist, git falls back to OpenSSL's
prompts (as in earlier versions of git).
The environment variable may only be used to enable, not to disable
git's password prompt. This behavior mimics GIT_NO_VERIFY; the mere
existence of the variable is all that is checked.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an SSL client certificate is enabled (via http.sslcert or
GIT_SSL_CERT), prompt for the certificate password rather than
defaulting to OpenSSL's password prompt. This causes the prompt to only
appear once each run. Previously, OpenSSL prompted the user *many*
times, causing git to be unusable over HTTPS with client-side
certificates.
Note that the password is stored in memory in the clear while the
program is running. This may be a security problem if git crashes and
core dumps.
The user is always prompted, even if the certificate is not encrypted.
This should be fine; unencrypted certificates are rare and a security
risk anyway.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on how your CVS->GIT conversion went you will have some
unexpanded CVS keywords in your GIT repo. If any of your git commits
touch these lines then the patch application will fail. This patch
addresses that by adding an option that will revert and expanded CVS
keywords to files in the working CVS directory that are affected by
the commit being applied.
Signed-off-by: Alex Bennée <alex@bennee.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the minimimum required libcurl version for the http.sslKey option
to 7.9.3. Previously, preprocessor macros checked for >= 7.9.2, which
is incorrect because CURLOPT_SSLKEY was introduced in 7.9.3. This now
allows git to compile with libcurl 7.9.2.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The system regex is either slow or buggy for complex
patterns, like the built-in xfuncname pattern for java
files.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no tweakable knob to use the regex compat code; it
was embedded in the mingw build. Since other platforms may
want to use it, let's factor it out in the usual way for
build configuration knobs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For another patch series I'm working on I needed some tests
for the cc-cmd feature of git-send-email.
This patch adds 3 tests for the feature and for the possibility
to specify --suppress-cc multiple times, and fixes two bugs.
The first bug is that the --suppress-cc option for `cccmd' was
misspelled as `ccmd' in the code. The second bug, which is
actually found only with my other series, is that the argument
to the cccmd is never quoted, so the cccmd would fail with
patch file names containing a space.
A third bug I fix (in the docs) is that the bodycc argument was
actually spelled ccbody in the documentation and bash completion.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Cc: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the refspec "<src>:" would be expanded to
"<src>:refs/heads/". Instead, treat an empty <dst> just like refspecs
without a colon.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch, symbolic links are turned into empty files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Cygwin, poll() reports POLLIN even for file descriptors that have
reached their end. This caused git upload-archive to be stuck in an
infinite loop, as it only looked at the POLLIN flag.
In addition to POLLIN, check if read() returned 0, which indicates
end-of-file, and keep looping only as long as at least one of the file
descriptors has input. This lets the following command finish on its
own when run in a git repository on Cygwin, instead of it getting stuck
after printing all file names:
$ git archive -v --remote . HEAD >/dev/null
Reported-by: Bob Kagy <bobkagy@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the old regex
^[ \t]*(([ \t]*[A-Za-z_][A-Za-z_0-9]*){2,}[ \t]*\([^;]*)$
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
you can backtrack arbitrarily from [A-Za-z_0-9]* into [A-Za-z_], thus
causing an exponential number of backtracks. Ironically it also causes
the regex not to work as intended; for example "catch" can match the
underlined part of the regex, the first repetition matching "c" and
the second matching "atch".
The replacement regex avoids this problem, because it makes sure that
at least a space/tab is eaten on each repetition. In other words,
a suffix of a repetition can never be a prefix of the next repetition.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that there is say() in git-sh-setup, these scripts don't need to use
their own. Migrate them over by setting GIT_QUIET and removing their
custom say() functions.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Scripts should use say() when they want to output non-error messages.
This function helps future script writers easily implement a quiet
option by setting GIT_QUIET to enable suppression of non-error messages.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am with 3-way outputs errors when applying, even though the
3-way will usually be successful. We suppress these errors from
git-apply because they are not "true" errors until the 3-way has been
attempted.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 4b7cc26 (git-am: use printf instead of echo on user-supplied
strings, 2007-05-25) fixed a bug where subjects with newlines would
cause git-am to echo multiple lines when it says "Applying: <subject>".
This test ensures that fix stays valid.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shifting 'unsigned char' or 'unsigned short' left can result in sign
extension errors, since the C integer promotion rules means that the
unsigned char/short will get implicitly promoted to a signed 'int' due to
the shift (or due to other operations).
This normally doesn't matter, but if you shift things up sufficiently, it
will now set the sign bit in 'int', and a subsequent cast to a bigger type
(eg 'long' or 'unsigned long') will now sign-extend the value despite the
original expression being unsigned.
One example of this would be something like
unsigned long size;
unsigned char c;
size += c << 24;
where despite all the variables being unsigned, 'c << 24' ends up being a
signed entity, and will get sign-extended when then doing the addition in
an 'unsigned long' type.
Since git uses 'unsigned char' pointers extensively, we actually have this
bug in a couple of places.
I may have missed some, but this is the result of looking at
git grep '[^0-9 ][ ]*<<[ ][a-z]' -- '*.c' '*.h'
git grep '<<[ ]*24'
which catches at least the common byte cases (shifting variables by a
variable amount, and shifting by 24 bits).
I also grepped for just 'unsigned char' variables in general, and
converted the ones that most obviously ended up getting implicitly cast
immediately anyway (eg hash_name(), encode_85()).
In addition to just avoiding 'unsigned char', this patch also tries to use
a common idiom for the delta header size thing. We had three different
variations on it: "& 0x7fUL" in one place (getting the sign extension
right), and "& ~0x80" and "& 0x7f" in two other places (not getting it
right). Apart from making them all just avoid using "unsigned char" at
all, I also unified them to then use a simple "& 0x7f".
I considered making a sparse extension which warns about doing implicit
casts from unsigned types to signed types, but it gets rather complex very
quickly, so this is just a hack.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, a fluky allocation failure would cause merge
configuration settings to be silently ignored.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* builtin-remote.c (get_one_entry): Use xmalloc, not malloc.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a clean_abort function that echoes an optional error message
to standard error, removes the dotest directory and exits with status 1.
Use it when patch format detection or patch splitting fails early.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to include only the modified and typechanged directories
in the ouptut, but for consistency's sake, we should also include
added and removed ones as well.
This makes the output more consistent, but it may break existing scripts
that expect to see the current output which has long been the established
behaviour.
Signed-off-by: Nick Edelen <sirnot@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/fix-send-email-threaded:
send-email: fix a typo in a comment
send-email: fix threaded mails without chain-reply-to
add a test for git-send-email for threaded mails without chain-reply-to
doc/send-email: clarify the behavior of --in-reply-to with --no-thread
send-email: fix non-threaded mails
add a test for git-send-email for non-threaded mails
* rc/http-push: (22 commits)
http*: add helper methods for fetching objects (loose)
http*: add helper methods for fetching packs
http: use new http API in fetch_index()
http*: add http_get_info_packs
http-push.c::fetch_symref(): use the new http API
http-push.c::remote_exists(): use the new http API
http.c::http_fetch_ref(): use the new http API
transport.c::get_refs_via_curl(): use the new http API
http.c: new functions for the http API
http: create function end_url_with_slash
http*: move common variables and macros to http.[ch]
transport.c::get_refs_via_curl(): do not leak refs_url
Don't expect verify_pack() callers to set pack_size
http-push: do not SEGV after fetching a bad pack idx file
http*: copy string returned by sha1_to_hex
http-walker: verify remote packs
http-push, http-walker: style fixes
t5550-http-fetch: test fetching of packed objects
http-push: fix missing "#ifdef USE_CURL_MULTI" around "is_running_queue"
http-push: send out fetch requests on queue
...
* 'cc/bisect' (early part):
t6030: test skipping away from an already skipped commit
bisect: when skipping, choose a commit away from a skipped commit
bisect: add parameters to "filter_skipped"
bisect: display first bad commit without forking a new process
bisect: drop unparse_commit() and use clear_commit_marks()
* sp/msysgit:
compat/ has subdirectories: do not omit them in 'make clean'
Fix typo in nedmalloc warning fix
MinGW: Teach Makefile to detect msysgit and apply specific settings
Fix warnings in nedmalloc when compiling with GCC 4.4.0
Add custom memory allocator to MinGW and MacOS builds
MinGW readdir reimplementation to support d_type
connect.c: Support PuTTY plink and TortoisePlink as SSH on Windows
git: browsing paths with spaces when using the start command
MinGW: fix warning about implicit declaration of _getch()
test-chmtime: work around Windows limitation
Work around a regression in Windows 7, causing erase_in_line() to crash sometimes
Quiet make: do not leave Windows behind
MinGW: GCC >= 4 does not need SNPRINTF_SIZE_CORR anymore
Conflicts:
Makefile
* bc/solaris:
configure: test whether -lresolv is needed
Makefile: insert SANE_TOOL_PATH to PATH before /bin or /usr/bin
git-compat-util.h: avoid using c99 flex array feature with Sun compiler 5.8
Makefile: add section for SunOS 5.7
Makefile: introduce SANE_TOOL_PATH for prepending required elements to PATH
Makefile: define __sun__ on SunOS
git-compat-util.h: tweak the way _XOPEN_SOURCE is set on Solaris
On Solaris choose the OLD_ICONV iconv() declaration based on the UNIX spec
Makefile: add NEEDS_RESOLV to optionally add -lresolv to compile arguments
Makefile: use /usr/ucb/install on SunOS platforms rather than ginstall
Conflicts:
Makefile
Rewrite the gc section using unresolved and resolved instead of "not
recorded". Add plurals and missing articles. Make some sentences have
consistent tense. Try and be more active by removing "that" and
simplifying sentences.
The terms "hand-resolve" and "hand resolve" were used, so just use "hand
resolve" to be more consistent.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This warning was probably useless anyway, but it is even more so now
that filtering of skipped commits is done in C and that there is a
mechanism to skip away from broken commits.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a PRNG (pseudo random number generator) with a bias should be better
than alternating between 3 fixed ratios.
In repositories with many untestable commits it should prevent alternating
between areas where many commits are untestable. The bias should favor
commits that can give more information, so that the bisection process
should not loose much efficiency.
HPA suggested to use a PRNG and found that the best bias is to raise a
ratio between 0 and 1 given by the PRNG to the power 1.5.
An integer square root function is implemented to avoid including
<math.h> and linking with -lm.
A PRNG function is implemented to get the same number sequence on
different machines as suggested by "man 3 rand".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, "remote -v" simply lists all urls so that one has to remember
that only the first one is used for fetches, and all are used for
pushes.
Change this so that the role of an url is displayed in parentheses, and
also display push urls.
Example with "one" having one url, "two" two urls, "three" one url and
one pushurl:
one hostone.com:/somepath/repoone.git (fetch)
one hostone.com:/somepath/repoone.git (push)
three http://hostthree.com/otherpath/repothree.git (fetch)
three hostthree.com:/pathforpushes/repothree.git (push)
two hosttwo.com:/somepath/repotwo.git (fetch)
two hosttwo.com:/somepath/repotwo.git (push)
two hosttwobackup.com:/somewheresafe/repotwo.git (push)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach builtin remote to show push urls also when asked to
"show" a specific remote.
This improves upon the standard display mode: multiple specified "url"s
mean that the first one is for fetching, all are used for pushing. We
make this clearer now by displaying the first one prefixed with "Fetch
URL", and all "url"s (or, if present, all "pushurl"s) prefixed with
"Push URL".
Example with "one" having one url, "two" two urls, "three" one url and
one pushurl (URL part only):
* remote one
Fetch URL: hostone.com:/somepath/repoone.git
Push URL: hostone.com:/somepath/repoone.git
* remote two
Fetch URL: hosttwo.com:/somepath/repotwo.git
Push URL: hosttwo.com:/somepath/repotwo.git
Push URL: hosttwobackup.com:/somewheresafe/repotwo.git
* remote three
Fetch URL: http://hostthree.com/otherpath/repothree.git
Push URL: hostthree.com:/pathforpushes/repothree.git
Also, adjust t5505 accordingly and make it test for the new output.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/maint-fix-send-email-threaded:
doc/send-email: clarify the behavior of --in-reply-to with --no-thread
send-email: fix non-threaded mails
add a test for git-send-email for non-threaded mails
Conflicts:
git-send-email.perl
t/t9001-send-email.sh
