Push pptr down into the FROM_MERGE branch of the if/else statement,
where it's actually used, and call commit_list_append() for appending
elements instead of playing tricks with commit_list_insert(). Call
copy_commit_list() in the amend branch instead of open-coding it. Don't
bother setting pptr in the final branch as it's not used thereafter.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user does the lazy "git push" with no parameters with
push.default set to either "upstream", "simple" or "current",
we internally generated a refspec that has the current branch name
on the source side and used it to push.
However, the branch name (say "test") may be an ambiguous refname in
the context of the source repository---there may be a tag with the
same name, for example. This would trigger an unnecessary error
without any fault on the end-user's side.
Be explicit and give a full refname as the source side to avoid the
ambiguity. The destination side when pushing with the "current"
sent only the name of the branch and forcing the receiving end to
guess, which is the same issue. Be explicit there as well.
Reported-by: Kannan Goundan <kannan@cakoose.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup.
* rs/cocci:
use strbuf_add_unique_abbrev() for adding short hashes, part 3
remove unnecessary NULL check before free(3)
coccicheck: make transformation for strbuf_addf(sb, "...") more precise
use strbuf_add_unique_abbrev() for adding short hashes, part 2
use strbuf_addstr() instead of strbuf_addf() with "%s", part 2
gitignore: ignore output files of coccicheck make target
use strbuf_addstr() for adding constant strings to a strbuf, part 2
add coccicheck make target
contrib/coccinelle: fix semantic patch for oid_to_hex_r()
When fetching from a remote that has many tags that are irrelevant
to branches we are following, we used to waste way too many cycles
when checking if the object pointed at by a tag (that we are not
going to fetch!) exists in our repository too carefully.
* jk/fetch-quick-tag-following:
fetch: use "quick" has_sha1_file for tag following
"git rebase" immediately after "git clone" failed to find the fork
point from the upstream.
* jk/merge-base-fork-point-without-reflog:
merge-base: handle --fork-point without reflog
"git clone" of a local repository can be done at the filesystem
level, but the codepath did not check errors while copying and
adjusting the file that lists alternate object stores.
* jk/clone-copy-alternates-fix:
clone: detect errors in normalize_path_copy
When new paths were added by "git add -N" to the index, it was
enough to circumvent the check by "git commit" to refrain from
making an empty commit without "--allow-empty". The same logic
prevented "git status" to show such a path as "new file" in the
"Changes not staged for commit" section.
* nd/ita-empty-commit:
commit: don't be fooled by ita entries when creating initial commit
commit: fix empty commit creation when there's no changes but ita entries
diff: add --ita-[in]visible-in-index
diff-lib: allow ita entries treated as "not yet exist in index"
Update of the sequencer codebase to make it reusable to reimplement
"rebase -i" continues.
* js/prepare-sequencer: (27 commits)
sequencer: mark all error messages for translation
sequencer: start error messages consistently with lower case
sequencer: quote filenames in error messages
sequencer: mark action_name() for translation
sequencer: remove overzealous assumption in rebase -i mode
sequencer: teach write_message() to append an optional LF
sequencer: refactor write_message() to take a pointer/length
sequencer: roll back lock file if write_message() failed
sequencer: stop releasing the strbuf in write_message()
sequencer: left-trim lines read from the script
sequencer: support cleaning up commit messages
sequencer: support amending commits
sequencer: allow editing the commit message on a case-by-case basis
sequencer: introduce a helper to read files written by scripts
sequencer: prepare for rebase -i's commit functionality
sequencer: remember the onelines when parsing the todo file
sequencer: get rid of the subcommand field
sequencer: avoid completely different messages for different actions
sequencer: strip CR from the todo script
sequencer: completely revamp the "todo" script parsing
...
A minor regression fix for "git submodule".
* sb/submodule-ignore-trailing-slash:
t0060: sidestep surprising path mangling results on Windows
submodule: ignore trailing slash in relative url
submodule: ignore trailing slash on superproject URL
Update "git diff --no-index" codepath not to try to peek into .git/
directory that happens to be under the current directory, when we
know we are operating outside any repository.
* jk/no-looking-at-dotgit-outside-repo:
diff: handle sha1 abbreviations outside of repository
diff_aligned_abbrev: use "struct oid"
diff_unique_abbrev: rename to diff_aligned_abbrev
find_unique_abbrev: use 4-buffer ring
test-*-cache-tree: setup git dir
read info/{attributes,exclude} only when in repository
"git push" and "git fetch" reports from what old object to what new
object each ref was updated, using abbreviated refnames, and they
attempt to align the columns for this and other pieces of
information. The way these codepaths compute how many display
columns to allocate for the object names portion of this output has
been updated to match the recent "auto scale the default
abbreviation length" change.
* jc/abbrev-auto:
transport: compute summary-width dynamically
transport: allow summary-width to be computed dynamically
fetch: pass summary_width down the callchain
transport: pass summary_width down the callchain
Allow the default abbreviation length, which has historically been
7, to scale as the repository grows. The logic suggests to use 12
hexdigits for the Linux kernel, and 9 to 10 for Git itself.
* lt/abbrev-auto:
abbrev: auto size the default abbreviation
abbrev: prepare for new world order
abbrev: add FALLBACK_DEFAULT_ABBREV to prepare for auto sizing
Some code paths want to format multiple abbreviated sha1s in
the same output line. Because we use a single static buffer
for our return value, they have to either break their output
into several calls or allocate their own arrays and use
find_unique_abbrev_r().
Intead, let's mimic sha1_to_hex() and use a ring of several
buffers, so that the return value stays valid through
multiple calls. This shortens some of the callers, and makes
it harder to for them to make a silly mistake.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recently graduated topic regressed "git rev-list --header"
output, breaking "gitweb". This has been fixed.
* jk/diff-submodule-diff-inline:
rev-list: use hdr_termination instead of a always using a newline
When fetching from a remote that has many tags that are irrelevant
to branches we are following, we used to waste way too many cycles
when checking if the object pointed at by a tag (that we are not
going to fetch!) exists in our repository too carefully.
* jk/fetch-quick-tag-following:
fetch: use "quick" has_sha1_file for tag following
"git rebase" immediately after "git clone" failed to find the fork
point from the upstream.
* jk/merge-base-fork-point-without-reflog:
merge-base: handle --fork-point without reflog
"git ls-files" learned "--recurse-submodules" option that can be
used to get a listing of tracked files across submodules (i.e. this
only works with "--cached" option, not for listing untracked or
ignored files). This would be a useful tool to sit on the upstream
side of a pipe that is read with xargs to work on all working tree
files from the top-level superproject.
* bw/ls-files-recurse-submodules:
ls-files: add pathspec matching for submodules
ls-files: pass through safe options for --recurse-submodules
ls-files: optionally recurse into submodules
git: make super-prefix option
The require_clean_work_tree() helper was recreated in C when "git
pull" was rewritten from shell; the helper is now made available to
other callers in preparation for upcoming "rebase -i" work.
* js/libify-require-clean-work-tree:
wt-status: begin error messages with lower-case
wt-status: teach has_{unstaged,uncommitted}_changes() about submodules
wt-status: export also the has_un{staged,committed}_changes() functions
wt-status: make the require_clean_work_tree() function reusable
pull: make code more similar to the shell script again
pull: drop confusing prefix parameter of die_on_unclean_work_tree()
This function is meant to be used when reading from files in the
object store, and the original objective was to avoid smudging atime
of loose object files too often, hence its name. Because we'll be
extending its role in the next commit to also arrange the file
descriptors they return auto-closed in the child processes, rename
it to lose "noatime" part that is too specific.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ita entries are dropped at tree generation phase. If the entire index
consists of just ita entries, the result would be a a commit with no
entries, which should be caught unless --allow-empty is specified. The
test "!!active_nr" is not sufficient to catch this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If i-t-a entries are present and there is no change between the index
and HEAD i-t-a entries, index_differs_from() still returns "dirty, new
entries" (aka, the resulting commit is not empty), but cache-tree will
skip i-t-a entries and produce the exact same tree of current
commit.
index_differs_from() is supposed to catch this so we can abort
git-commit (unless --no-empty is specified). Update it to optionally
ignore i-t-a entries when doing a diff between the index and HEAD so
that it would return "no change" in this case and abort commit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now we have identified three callchains that have a set of refs that
they want to show their <old, new> object names in an aligned output,
we can replace their reference to the constant TRANSPORT_SUMMARY_WIDTH
with a helper function call to transport_summary_width() that takes
the set of ref as a parameter. This step does not yet iterate over
the refs and compute, which is left as an exercise to the readers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The leaf function on the "fetch" side that uses TRANSPORT_SUMMARY_WIDTH
constant is builtin/fetch.c::format_display() and it has two distinct
callchains. The one that reports the primary result of fetch originates
at store_updated_refs(); the other one that reports the pruning of
the remote-tracking refs originates at prune_refs().
Teach these two places to pass summary_width down the callchain,
just like we did for the "push" side in the previous commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The subcommands are used exactly once, at the very beginning of
sequencer_pick_revisions(), to determine what to do. This is an
unnecessary level of indirection: we can simply call the correct
function to begin with. So let's do that.
While at it, ensure that the subcommands return an error code so that
they do not have to die() all over the place (bad practice for library
functions...).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sequencer is our attempt to lib-ify cherry-pick. Yet it behaves
like a one-shot command when it reads its configuration: memory is
allocated and released only when the command exits.
This is kind of okay for git-cherry-pick, which *is* a one-shot
command. All the work to make the sequencer its work horse was
done to allow using the functionality as a library function, though,
including proper clean-up after use.
To remedy that, take custody of the option values in question,
allocating and duping literal constants as needed and freeing them
at end.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding support for prefixing output of log and other commands using
--line-prefix, commit 660e113ce1 ("graph: add support for
--line-prefix on all graph-aware output", 2016-08-31) accidentally
broke rev-list --header output.
In order to make the output appear with a line-prefix, the flow was
changed to always use the graph subsystem for display. Unfortunately
the graph flow in rev-list did not use info->hdr_termination as it was
assumed that graph output would never need to putput NULs.
Since we now always use the graph code in order to handle the case of
line-prefix, simply replace putchar('\n') with
putchar(info->hdr_termination) which will correct this issue.
Add a test for the --header case to make sure we don't break it in the
future.
Reported-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Codepaths involved in interacting alternate object store have
been cleaned up.
* jk/alt-odb-cleanup:
alternates: use fspathcmp to detect duplicates
sha1_file: always allow relative paths to alternates
count-objects: report alternates via verbose mode
fill_sha1_file: write into a strbuf
alternates: store scratch buffer as strbuf
fill_sha1_file: write "boring" characters
alternates: use a separate scratch space
alternates: encapsulate alt->base munging
alternates: provide helper for allocating alternate
alternates: provide helper for adding to alternates list
link_alt_odb_entry: refactor string handling
link_alt_odb_entry: handle normalize_path errors
t5613: clarify "too deep" recursion tests
t5613: do not chdir in main process
t5613: whitespace/style cleanups
t5613: use test_must_fail
t5613: drop test_valid_repo function
t5613: drop reachable_via function
In order for the receiving end of "git push" to inspect the
received history and decide to reject the push, the objects sent
from the sending end need to be made available to the hook and
the mechanism for the connectivity check, and this was done
traditionally by storing the objects in the receiving repository
and letting "git gc" to expire it. Instead, store the newly
received objects in a temporary area, and make them available by
reusing the alternate object store mechanism to them only while we
decide if we accept the check, and once we decide, either migrate
them to the repository or purge them immediately.
* jk/quarantine-received-objects:
tmp-objdir: do not migrate files starting with '.'
tmp-objdir: put quarantine information in the environment
receive-pack: quarantine objects until pre-receive accepts
tmp-objdir: introduce API for temporary object directories
check_connected: accept an env argument
"git clone" of a local repository can be done at the filesystem
level, but the codepath did not check errors while copying and
adjusting the file that lists alternate object stores.
* jk/clone-copy-alternates-fix:
clone: detect errors in normalize_path_copy
This change is not completely faithful: instead of initializing all fields
to 0, we choose to initialize command and subcommand to -1 (instead of
defaulting to REPLAY_REVERT and REPLAY_NONE, respectively). Practically,
it makes no difference at all, but future-proofs the code to require
explicit assignments for both fields.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
packet_write() should be called packet_write_fmt() because it is a
printf-like function that takes a format string as first parameter.
packet_write_fmt() should be used for text strings only. Arbitrary
binary data should use a new packet_write() function that is introduced
in a subsequent patch.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we auto-follow tags in a fetch, we look at all of the
tags advertised by the remote and fetch ones where we don't
already have the tag, but we do have the object it peels to.
This involves a lot of calls to has_sha1_file(), some of
which we can reasonably expect to fail. Since 45e8a74
(has_sha1_file: re-check pack directory before giving up,
2013-08-30), this may cause many calls to
reprepare_packed_git(), which is potentially expensive.
This has gone unnoticed for several years because it
requires a fairly unique setup to matter:
1. You need to have a lot of packs on the client side to
make reprepare_packed_git() expensive (the most
expensive part is finding duplicates in an unsorted
list, which is currently quadratic).
2. You need a large number of tag refs on the server side
that are candidates for auto-following (i.e., that the
client doesn't have). Each one triggers a re-read of
the pack directory.
3. Under normal circumstances, the client would
auto-follow those tags and after one large fetch, (2)
would no longer be true. But if those tags point to
history which is disconnected from what the client
otherwise fetches, then it will never auto-follow, and
those candidates will impact it on every fetch.
So when all three are true, each fetch pays an extra
O(nr_tags * nr_packs^2) cost, mostly in string comparisons
on the pack names. This was exacerbated by 47bf4b0
(prepare_packed_git_one: refactor duplicate-pack check,
2014-06-30) which uses a slightly more expensive string
check, under the assumption that the duplicate check doesn't
happen very often (and it shouldn't; the real problem here
is how often we are calling reprepare_packed_git()).
This patch teaches fetch to use HAS_SHA1_QUICK to sacrifice
accuracy for speed, in cases where we might be racy with a
simultaneous repack. This is similar to the fix in 0eeb077
(index-pack: avoid excessive re-reading of pack directory,
2015-06-09). As with that case, it's OK for has_sha1_file()
occasionally say "no I don't have it" when we do, because
the worst case is not a corruption, but simply that we may
fail to auto-follow a tag that points to it.
Here are results from the included perf script, which sets
up a situation similar to the one described above:
Test HEAD^ HEAD
----------------------------------------------------------
5550.4: fetch 11.21(10.42+0.78) 0.08(0.04+0.02) -99.3%
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --fork-point option looks in the reflog to try to find
where a derived branch forked from a base branch. However,
if the reflog for the base branch is totally empty (as it
commonly is right after cloning, which does not write a
reflog entry), then our for_each_reflog call will not find
any entries, and we will come up with no merge base, even
though there may be one with the current tip of the base.
We can fix this by just adding the current tip to
our list of collected entries.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree", even though it used the default_abbrev setting that
ought to be affected by core.abbrev configuration variable, ignored
the variable setting. The command has been taught to read the
default set of configuration variables to correct this.
* jc/worktree-config:
worktree: honor configuration variables
Almost everybody uses DEFAULT_ABBREV to refer to the default
setting for the abbreviation, but "git blame" peeked into
underlying variable bypassing the macro for no good reason.
* jc/blame-abbrev:
blame: use DEFAULT_ABBREV macro
The <tree-ish> parameter is actually optional (see man page).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a common mistake to say "git blame --reverse OLD path",
expecting that the command line is dwimmed as if asking how lines
in path in an old revision OLD have survived up to the current
commit.
* jc/blame-reverse:
blame: dwim "blame --reverse OLD" as "blame --reverse OLD.."
blame: improve diagnosis for "--reverse NEW"
The existing "git fetch --depth=<n>" option was hard to use
correctly when making the history of an existing shallow clone
deeper. A new option, "--deepen=<n>", has been added to make this
easier to use. "git clone" also learned "--shallow-since=<date>"
and "--shallow-exclude=<tag>" options to make it easier to specify
"I am interested only in the recent N months worth of history" and
"Give me only the history since that version".
* nd/shallow-deepen: (27 commits)
fetch, upload-pack: --deepen=N extends shallow boundary by N commits
upload-pack: add get_reachable_list()
upload-pack: split check_unreachable() in two, prep for get_reachable_list()
t5500, t5539: tests for shallow depth excluding a ref
clone: define shallow clone boundary with --shallow-exclude
fetch: define shallow boundary with --shallow-exclude
upload-pack: support define shallow boundary by excluding revisions
refs: add expand_ref()
t5500, t5539: tests for shallow depth since a specific date
clone: define shallow clone boundary based on time with --shallow-since
fetch: define shallow boundary with --shallow-since
upload-pack: add deepen-since to cut shallow repos based on time
shallow.c: implement a generic shallow boundary finder based on rev-list
fetch-pack: use a separate flag for fetch in deepening mode
fetch-pack.c: mark strings for translating
fetch-pack: use a common function for verbose printing
fetch-pack: use skip_prefix() instead of starts_with()
upload-pack: move rev-list code out of check_non_tip()
upload-pack: make check_non_tip() clean things up on error
upload-pack: tighten number parsing at "deepen" lines
...
"git pack-objects" in a repository with many packfiles used to
spend a lot of time looking for/at objects in them; the accesses to
the packfiles are now optimized by checking the most-recently-used
packfile first.
* jk/pack-objects-optim-mru:
pack-objects: use mru list when iterating over packs
pack-objects: break delta cycles before delta-search phase
sha1_file: make packed_object_info public
provide an initializer for "struct object_info"
We call "qsort(array, nelem, sizeof(array[0]), fn)", and most of
the time third parameter is redundant. A new QSORT() macro lets us
omit it.
* rs/qsort:
show-branch: use QSORT
use QSORT, part 2
coccicheck: use --all-includes by default
remove unnecessary check before QSORT
use QSORT
add QSORT
When a client pushes objects to us, index-pack checks the
objects themselves and then installs them into place. If we
then reject the push due to a pre-receive hook, we cannot
just delete the packfile; other processes may be depending
on it. We have to do a normal reachability check at this
point via `git gc`.
But such objects may hang around for weeks due to the
gc.pruneExpire grace period. And worse, during that time
they may be exploded from the pack into inefficient loose
objects.
Instead, this patch teaches receive-pack to put the new
objects into a "quarantine" temporary directory. We make
these objects available to the connectivity check and to the
pre-receive hook, and then install them into place only if
it is successful (and otherwise remove them as tempfiles).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a case-insensitive filesystem, we should realize that
"a/objects" and "A/objects" are the same path. We already
use fspathcmp() to check against the main object directory,
but until recently we couldn't use it for comparing against
other alternates (because their paths were not
NUL-terminated strings). But now we can, so let's do so.
Note that we also need to adjust count-objects to load the
config, so that it can see the setting of core.ignorecase
(this is required by the test, but is also a general bugfix
for users of count-objects).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no way to get the list of alternates that git
computes internally; our tests only infer it based on which
objects are available. In addition to testing, knowing this
list may be helpful for somebody debugging their alternates
setup.
Let's add it to the "count-objects -v" output. We could give
it a separate flag, but there's not really any need.
"count-objects -v" is already a debugging catch-all for the
object database, its output is easily extensible to new data
items, and printing the alternates is not expensive (we
already had to find them to count the objects).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The alternate_object_database struct uses a single buffer
both for storing the path to the alternate, and as a scratch
buffer for forming object names. This is efficient (since
otherwise we'd end up storing the path twice), but it makes
life hard for callers who just want to know the path to the
alternate. They have to remember to stop reading after
"alt->name - alt->base" bytes, and to subtract one for the
trailing '/'.
It would be much simpler if they could simply access a
NUL-terminated path string. We could encapsulate this in a
function which puts a NUL in the scratch buffer and returns
the string, but that opens up questions about the lifetime
of the result. The first time another caller uses the
alternate, the scratch buffer may get other data tacked onto
it.
Let's instead just store the root path separately from the
scratch buffer. There aren't enough alternates being stored
for the duplicated data to matter for performance, and this
keeps things simple and safe for the callers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is similar to the previous patch, though no user reported a bug and
I could not find a regressive behavior.
However it is a good thing to be strict on the output and for that we
always omit a trailing slash.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before 63e95beb0 (2016-04-15, submodule: port resolve_relative_url from
shell to C), it did not matter if the superprojects URL had a trailing
slash or not. It was just chopped off as one of the first steps
(The "remoteurl=${remoteurl%/}" near the beginning of
resolve_relative_url(), which was removed in said commit).
When porting this to the C version, an off-by-one error was introduced
and we did not check the actual last character to be a slash, but the
NULL delimiter.
Reintroduce the behavior from before 63e95beb0, to ignore the trailing
slash.
Reported-by: <venv21@gmail.com>
Helped-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pathspecs can be a bit tricky when trying to apply them to submodules.
The main challenge is that the pathspecs will be with respect to the
superproject and not with respect to paths in the submodule. The
approach this patch takes is to pass in the identical pathspec from the
superproject to the submodule in addition to the submodule-prefix, which
is the path from the root of the superproject to the submodule, and then
we can compare an entry in the submodule prepended with the
submodule-prefix to the pathspec in order to determine if there is a
match.
This patch also permits the pathspec logic to perform a prefix match against
submodules since a pathspec could refer to a file inside of a submodule.
Due to limitations in the wildmatch logic, a prefix match is only done
literally. If any wildcard character is encountered we'll simply punt
and produce a false positive match. More accurate matching will be done
once inside the submodule. This is due to the superproject not knowing
what files could exist in the submodule.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass through some known-safe options when recursing into submodules.
(--cached, -v, -t, -z, --debug, --eol)
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow ls-files to recognize submodules in order to retrieve a list of
files from a repository's submodules. This is done by forking off a
process to recursively call ls-files on all submodules. Use top-level
--super-prefix option to pass a path to the submodule which it can
use to prepend to output or pathspec matching logic.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes we are *actually* interested in those changes... For
example when an interactive rebase wants to continue with a staged
submodule update.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function used by "git pull" to stop the user when the working
tree has changes is useful in other places.
Let's move it into a more prominent (and into an actually reusable)
spot: wt-status.[ch].
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When converting the pull command to a builtin, the
require_clean_work_tree() function was renamed and the pull-specific
parts hard-coded.
This makes it impossible to reuse the code, so let's modify the code to
make it more similar to the original shell script again.
Note: when the hint "Please commit or stash them" was introduced first,
Git did not have the convention of continuing error messages in lower
case, but now we do have that convention, therefore we reintroduce this
hint down-cased, obeying said convention.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cmd_pull(), when verifying that there are no changes preventing a
rebasing pull, we diligently pass the prefix parameter to the
die_on_unclean_work_tree() function which in turn diligently passes it
to the has_unstaged_changes() and has_uncommitted_changes() functions.
The casual reader might now be curious (as this developer was) whether
that means that calling `git pull --rebase` in a subdirectory will
ignore unstaged changes in other parts of the working directory. And be
puzzled that `git pull --rebase` (correctly) complains about those
changes outside of the current directory.
The puzzle is easily resolved: while we take pains to pass around the
prefix and even pass it to init_revisions(), the fact that no paths are
passed to init_revisions() ensures that the prefix is simply ignored.
That, combined with the fact that we will *always* want a *full* working
directory check before running a rebasing pull, is reason enough to
simply do away with the actual prefix parameter and to pass NULL
instead, as if we were running this from the top-level working directory
anyway.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up with help from coccinelle tool continues.
* rs/cocci:
coccicheck: make transformation for strbuf_addf(sb, "...") more precise
use strbuf_add_unique_abbrev() for adding short hashes, part 2
use strbuf_addstr() instead of strbuf_addf() with "%s", part 2
gitignore: ignore output files of coccicheck make target
"git log rev^..rev" is an often-used revision range specification
to show what was done on a side branch merged at rev. This has
gained a short-hand "rev^-1". In general "rev^-$n" is the same as
"^rev^$n rev", i.e. what has happened on other branches while the
history leading to nth parent was looking the other way.
* vn/revision-shorthand-for-side-branch-log:
revision: new rev^-n shorthand for rev^n..rev
Almost everybody uses DEFAULT_ABBREV to refer to the default
setting for the abbreviation, but "git blame" peeked into
underlying variable bypassing the macro for no good reason.
* jc/blame-abbrev:
blame: use DEFAULT_ABBREV macro
When given an abbreviated object name that is not (or more
realistically, "no longer") unique, we gave a fatal error
"ambiguous argument". This error is now accompanied by hints that
lists the objects that begins with the given prefix. During the
course of development of this new feature, numerous minor bugs were
uncovered and corrected, the most notable one of which is that we
gave "short SHA1 xxxx is ambiguous." twice without good reason.
* jk/ambiguous-short-object-names:
get_short_sha1: make default disambiguation configurable
get_short_sha1: list ambiguous objects on error
for_each_abbrev: drop duplicate objects
sha1_array: let callbacks interrupt iteration
get_short_sha1: mark ambiguity error for translation
get_short_sha1: NUL-terminate hex prefix
get_short_sha1: refactor init of disambiguation code
get_short_sha1: parse tags when looking for treeish
get_sha1: propagate flags to child functions
get_sha1: avoid repeating ourselves via ONLY_TO_DIE
get_sha1: detect buggy calls with multiple disambiguators
When we are copying the alternates from the source
repository, if we find a relative path that is too deep for
the source (e.g., "../../../objects" from "/repo.git/objects"),
then normalize_path_copy will report an error and leave
trash in the buffer, which we will add to our new alternates
file. Instead, let's detect the error, print a warning, and
skip copying that alternate.
There's no need to die. The relative path is probably just
broken cruft in the source repo. If it turns out to have
been important for accessing some objects, we rely on other
parts of the clone to detect that, just as they would with a
missing object in the source repo itself (though note that
clones with "-s" are inherently local, which may do fewer
object-quality checks in the first place).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git init" tried to record core.worktree in the repository's
'config' file when GIT_WORK_TREE environment variable was set and
it was different from where GIT_DIR appears as ".git" at its top,
but the logic was faulty when .git is a "gitdir:" file that points
at the real place, causing trouble in working trees that are
managed by "git worktree". This has been corrected.
* nd/init-core-worktree-in-multi-worktree-world:
init: kill git_link variable
init: do not set unnecessary core.worktree
init: kill set_git_dir_init()
init: call set_git_dir_init() from within init_db()
init: correct re-initialization from a linked worktree
"git pack-objects --include-tag" was taught that when we know that
we are sending an object C, we want a tag B that directly points at
C but also a tag A that points at the tag B. We used to miss the
intermediate tag B in some cases.
* jk/pack-tag-of-tag:
pack-objects: walk tag chains for --include-tag
t5305: simplify packname handling
t5305: use "git -C"
t5305: drop "dry-run" of unpack-objects
t5305: move cleanup into test block
The code that sets custom abbreviation length, in response to
command line argument, often does something like this:
if (skip_prefix(arg, "--abbrev=", &arg))
abbrev = atoi(arg);
else if (!strcmp("--abbrev", &arg))
abbrev = DEFAULT_ABBREV;
/* make the value sane */
if (abbrev < 0 || 40 < abbrev)
abbrev = ... some sane value ...
However, it is pointless to sanity-check and tweak the value
obtained from DEFAULT_ABBREV. We are going to allow it to be
initially set to -1 to signal that the default abbreviation length
must be auto sized upon the first request to abbreviate, based on
the number of objects in the repository, and when that happens,
rejecting or tweaking a negative value to a "saner" one will
negatively interfere with the auto sizing. The codepaths for
git rev-parse --short <object>
git diff --raw --abbrev
do exactly that; allow them to pass possibly negative abbrevs
intact, that will come from DEFAULT_ABBREV in the future.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'll be introducing a new way to decide the default abbreviation
length by initialising DEFAULT_ABBREV to -1 to signal the first call
to "find unique abbreviation" codepath to compute a reasonable value
based on the number of objects we have to avoid collisions.
We have long relied on DEFAULT_ABBREV being a positive concrete
value that is used as the abbreviation length when no extra
configuration or command line option has overridden it. Some
codepaths wants to use such a positive concrete default value
even before making their first request to actually trigger the
computation for the auto sized default.
Introduce FALLBACK_DEFAULT_ABBREV and use it to the code that
attempts to align the report from "git fetch". For now, this
macro is also used to initialize the default_abbrev variable,
but the auto-sizing code will use -1 and then use the value of
FALLBACK_DEFAULT_ABBREV as the starting point of auto-sizing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shorten the code by using QSORT instead of calling qsort(3) directly,
as the former determines the element size automatically and checks if
there are at least two elements to sort already.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert two more qsort(3) calls to QSORT to reduce code size and for
better safety and consistency.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree", even though it used the default_abbrev setting that
ought to be affected by core.abbrev configuration variable, ignored
the variable setting. The command has been taught to read the
default set of configuration variables to correct this.
* jc/worktree-config:
worktree: honor configuration variables
"git add --chmod=+x <pathspec>" added recently only toggled the
executable bit for paths that are either new or modified. This has
been corrected to flip the executable bit for all paths that match
the given pathspec.
* tg/add-chmod+x-fix:
t3700-add: do not check working tree file mode without POSIXPERM
t3700-add: create subdirectory gently
add: modify already added files when --chmod is given
read-cache: introduce chmod_index_entry
update-index: add test for chmod flags
"git checkout <word>" does not follow the usual disambiguation
rules when the <word> can be both a rev and a path, to allow
checking out a branch 'foo' in a project that happens to have a
file 'foo' in the working tree without having to disambiguate.
This was poorly documented and the check was incorrect when the
command was run from a subdirectory.
* nd/checkout-disambiguation:
checkout: fix ambiguity check in subdir
checkout.txt: document a common case that ignores ambiguation rules
checkout: add some spaces between code and comment
"git gc --aggressive" used to limit the delta-chain length to 250,
which is way too deep for gaining additional space savings and is
detrimental for runtime performance. The limit has been reduced to
50.
* jk/reduce-gc-aggressive-depth:
gc: default aggressive depth to 50
"git format-patch --base=..." feature that was recently added
showed the base commit information after "-- " e-mail signature
line, which turned out to be inconvenient. The base information
has been moved above the signature line.
* jt/format-patch-base-info-above-sig:
format-patch: show base info before email signature
Add a semantic patch for removing checks similar to the one that QSORT
already does internally and apply it to the code base.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the semantic patch contrib/coccinelle/qsort.cocci to the code
base, replacing calls of qsort(3) with QSORT. The resulting code is
shorter and supports empty arrays with NULL pointers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This does not make any practical difference in today's code, but
everybody else accesses the default abbreviation length via the
DEFAULT_ABBREV macro. Make sure this oddball codepath does not
stray from the convention.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace uses of strbuf_addf() for adding strings with more lightweight
strbuf_addstr() calls. This is shorter and makes the intent clearer.
bc57b9c0cc already converted three cases,
this patch covers two more.
A semantic patch for Coccinelle is included for easier checking for
new cases that might be introduced in the future.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log rev^..rev" is commonly used to show all work done on and merged
from a side branch. This patch introduces a shorthand "rev^-" for this
and additionally allows "rev^-$n" to mean "reachable from rev, excluding
what is reachable from the nth parent of rev". For example, for a
two-parent merge, you can use rev^-2 to get the set of commits which were
made to the main branch while the topic branch was prepared.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command accesses default_abbrev (defined in environment.c and is
updated via core.abbrev configuration), but never makes any call to
git_config(). The output from "worktree list" ignores the abbrev
setting for this reason.
Make a call to git_config() to read the default set of configuration
variables at the beginning of the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --recurse-submodules" lost the progress eye-candy in
recent update, which has been corrected.
* jk/clone-recursive-progress:
clone: pass --progress decision to recursive submodules
"git add --chmod=+x <pathspec>" added recently only toggled the
executable bit for paths that are either new or modified. This has
been corrected to flip the executable bit for all paths that match
the given pathspec.
* tg/add-chmod+x-fix:
t3700-add: do not check working tree file mode without POSIXPERM
t3700-add: create subdirectory gently
add: modify already added files when --chmod is given
read-cache: introduce chmod_index_entry
update-index: add test for chmod flags
"git checkout <word>" does not follow the usual disambiguation
rules when the <word> can be both a rev and a path, to allow
checking out a branch 'foo' in a project that happens to have a
file 'foo' in the working tree without having to disambiguate.
This was poorly documented and the check was incorrect when the
command was run from a subdirectory.
* nd/checkout-disambiguation:
checkout: fix ambiguity check in subdir
checkout.txt: document a common case that ignores ambiguation rules
checkout: add some spaces between code and comment
In some projects, it is common to use "[RFC PATCH]" as the subject
prefix for a patch meant for discussion rather than application. A
new option "--rfc" was a short-hand for "--subject-prefix=RFC PATCH"
to help the participants of such projects.
* jt/format-patch-rfc:
format-patch: add "--rfc" for the common case of [RFC PATCH]
Output from "git diff" can be made easier to read by selecting
which lines are common and which lines are added/deleted
intelligently when the lines before and after the changed section
are the same. A command line option is added to help with the
experiment to find a good heuristics.
* mh/diff-indent-heuristic:
blame: honor the diff heuristic options and config
parse-options: add parse_opt_unknown_cb()
diff: improve positioning of add/delete blocks in diffs
xdl_change_compact(): introduce the concept of a change group
recs_match(): take two xrecord_t pointers as arguments
is_blank_line(): take a single xrecord_t as argument
xdl_change_compact(): only use heuristic if group can't be matched
xdl_change_compact(): fix compaction heuristic to adjust ixo
Code cleanup.
* rs/cocci:
use strbuf_addstr() for adding constant strings to a strbuf, part 2
add coccicheck make target
contrib/coccinelle: fix semantic patch for oid_to_hex_r()
The callbacks for iterating a sha1_array must have a void
return. This is unlike our usual for_each semantics, where
a callback may interrupt iteration and have its value
propagated. Let's switch it to the usual form, which will
enable its use in more places (e.g., where we are replacing
an existing iteration with a different data structure).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a semantic patch for converting certain calls of memcpy(3) to
COPY_ARRAY() and apply that transformation to the code base. The result
is
shorter and safer code. For now only consider calls where source and
destination have the same type, or in other words: easy cases.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function needs_work_tree_config() that is called from
create_default_files() is supposed to be fed the path to ".git" that
looks as if it is at the top of the working tree, and decide if that
location matches the actual worktree being used. This comparison allows
"git init" to decide if core.worktree needs to be recorded in the
working tree.
In the current code, however, we feed the return value from
get_git_dir(), which can be totally different from what the function
expects when "gitdir" file is involved. Instead of giving the path to
the ".git" at the top of the working tree, we end up feeding the actual
path that the file points at.
This original location of ".git" however is only known to init_db().
Make init_db() save it and have it passed to create_default_files() as a
new parameter, which passes the correct location down to
needs_work_tree_config() to fix this.
Noticed-by: Max Nordlund <max.nordlund@sqore.com>
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a pure code move, necessary to kill the global variable git_link
later (and also helps a bit in the next patch).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next commit requires that set_git_dir_init() must be called before
init_db(). Let's make sure nobody can do otherwise.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git init' is called from a linked worktree, we treat '.git'
dir (which is $GIT_COMMON_DIR/worktrees/something) as the main
'.git' (i.e. $GIT_COMMON_DIR) and populate the whole repository skeleton
in there. It does not harm anything (*) but it is still wrong.
Since 'git init' calls set_git_dir() at preparation time, which
indirectly calls get_common_dir() and correctly detects multiple
worktree setup, all git_path_buf() calls in create_default_files() will
return correct paths in both single and multiple worktree setups. The
only thing left is copy_templates(), which targets $GIT_DIR, not
$GIT_COMMON_DIR.
Fix that with get_git_common_dir(). This function will return $GIT_DIR
in single-worktree setup, so we don't have to make a special case for
multiple-worktree here.
(*) It does in fact, thanks to another bug. More on that later.
Noticed-by: Max Nordlund <max.nordlund@sqore.com>
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a static initializer for struct checkout and use it throughout the
code base. It's shorter, avoids a memset(3) call and makes sure the
base_dir member is initialized to a valid (empty) string.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning with "--recursive", we'd generally expect
submodules to show progress reports if the main clone did,
too.
In older versions of git, this mostly worked out of the
box. Since we show progress by default when stderr is a tty,
and since the child clones inherit the parent stderr, then
both processes would come to the same decision by default.
If the parent clone was asked for "--quiet", we passed down
"--quiet" to the child. However, if stderr was not a tty and
the user specified "--progress", we did not propagate this
to the child.
That's a minor bug, but things got much worse when we
switched recently to submodule--helper's update_clone
command. With that change, the stderr of the child clones
are always connected to a pipe, and we never output
progress at all.
This patch teaches git-submodule and git-submodule--helper
how to pass down an explicit "--progress" flag when cloning.
The clone command then decides to propagate that flag based
on the cloning decision made earlier (which takes into
account isatty(2) of the parent process, existing --progress
or --quiet flags, etc). Since the child processes always run
without a tty on stderr, we don't have to worry about
passing an explicit "--no-progress"; it's the default for
them.
This fixes the recent loss of progress during recursive
clones. And as a bonus, it makes:
git clone --recursive --progress ... 2>&1 | cat
work by triggering progress explicitly in the children.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git gc --aggressive" used to limit the delta-chain length to 250,
which is way too deep for gaining additional space savings and is
detrimental for runtime performance. The limit has been reduced to
50.
* jk/reduce-gc-aggressive-depth:
gc: default aggressive depth to 50
More i18n.
* va/i18n:
i18n: update-index: mark warnings for translation
i18n: show-branch: mark plural strings for translation
i18n: show-branch: mark error messages for translation
i18n: receive-pack: mark messages for translation
notes: spell first word of error messages in lowercase
i18n: notes: mark error messages for translation
i18n: merge-recursive: mark verbose message for translation
i18n: merge-recursive: mark error messages for translation
i18n: config: mark error message for translation
i18n: branch: mark option description for translation
i18n: blame: mark error messages for translation
"git format-patch --base=..." feature that was recently added
showed the base commit information after "-- " e-mail signature
line, which turned out to be inconvenient. The base information
has been moved above the signature line.
* jt/format-patch-base-info-above-sig:
format-patch: show base info before email signature
There were numerous corner cases in which the configuration files
are read and used or not read at all depending on the directory a
Git command was run, leading to inconsistent behaviour. The code
to set-up repository access at the beginning of a Git process has
been updated to fix them.
* jk/setup-sequence-update:
t1007: factor out repeated setup
init: reset cached config when entering new repo
init: expand comments explaining config trickery
config: only read .git/config from configured repos
test-config: setup git directory
t1302: use "git -C"
pager: handle early config
pager: use callbacks instead of configset
pager: make pager_program a file-local static
pager: stop loading git_default_config()
pager: remove obsolete comment
diff: always try to set up the repository
diff: handle --no-index prefixes consistently
diff: skip implicit no-index check when given --no-index
patch-id: use RUN_SETUP_GENTLY
hash-object: always try to set up the git repository
Some codepaths in "git pack-objects" were not ready to use an
existing pack bitmap; now they are and as the result they have
become faster.
* ks/pack-objects-bitmap:
pack-objects: use reachability bitmap index when generating non-stdout pack
pack-objects: respect --local/--honor-pack-keep/--incremental when bitmap is in use
Even though "git hash-objects", which is a tool to take an
on-filesystem data stream and put it into the Git object store,
allowed to perform the "outside-world-to-Git" conversions (e.g.
end-of-line conversions and application of the clean-filter), and
it had the feature on by default from very early days, its reverse
operation "git cat-file", which takes an object from the Git object
store and externalize for the consumption by the outside world,
lacked an equivalent mechanism to run the "Git-to-outside-world"
conversion. The command learned the "--filters" option to do so.
* js/cat-file-filters:
cat-file: support --textconv/--filters in batch mode
cat-file --textconv/--filters: allow specifying the path separately
cat-file: introduce the --filters option
cat-file: fix a grammo in the man page
Add an alias for --subject-prefix='RFC PATCH', which is used
commonly in some development communities to deserve such a
short-hand.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The two functions in parse_branchname_arg(), verify_non_filename and
check_filename, need correct prefix in order to reconstruct the paths
and check for their existence. With NULL prefix, they just check paths
at top dir instead.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Message cleanup.
* ah/misc-message-fixes:
unpack-trees: do not capitalize "working"
git-merge-octopus: do not capitalize "octopus"
git-rebase--interactive: fix English grammar
cat-file: put spaces around pipes in usage string
am: put spaces around pipe in usage string
"git symbolic-ref -d HEAD" happily removes the symbolic ref, but
the resulting repository becomes an invalid one. Teach the command
to forbid removal of HEAD.
* jc/forbid-symbolic-ref-d-HEAD:
symbolic-ref -d: do not allow removal of HEAD
The "unsigned char sha1[20]" to "struct object_id" conversion
continues. Notable changes in this round includes that ce->sha1,
i.e. the object name recorded in the cache_entry, turns into an
object_id.
It had merge conflicts with a few topics in flight (Christian's
"apply.c split", Dscho's "cat-file --filters" and Jeff Hostetler's
"status --porcelain-v2"). Extra sets of eyes double-checking for
mismerges are highly appreciated.
* bc/object-id:
builtin/reset: convert to use struct object_id
builtin/commit-tree: convert to struct object_id
builtin/am: convert to struct object_id
refs: add an update_ref_oid function.
sha1_name: convert get_sha1_mb to struct object_id
builtin/update-index: convert file to struct object_id
notes: convert init_notes to use struct object_id
builtin/rm: convert to use struct object_id
builtin/blame: convert file to use struct object_id
Convert read_mmblob to take struct object_id.
notes-merge: convert struct notes_merge_pair to struct object_id
builtin/checkout: convert some static functions to struct object_id
streaming: make stream_blob_to_fd take struct object_id
builtin: convert textconv_object to use struct object_id
builtin/cat-file: convert some static functions to struct object_id
builtin/cat-file: convert struct expand_data to use struct object_id
builtin/log: convert some static functions to use struct object_id
builtin/blame: convert struct origin to use struct object_id
builtin/apply: convert static functions to struct object_id
cache: convert struct cache_entry to use struct object_id
The ref-store abstraction was introduced to the refs API so that we
can plug in different backends to store references.
* mh/ref-store: (38 commits)
refs: implement iteration over only per-worktree refs
refs: make lock generic
refs: add method to rename refs
refs: add methods to init refs db
refs: make delete_refs() virtual
refs: add method for initial ref transaction commit
refs: add methods for reflog
refs: add method iterator_begin
files_ref_iterator_begin(): take a ref_store argument
split_symref_update(): add a files_ref_store argument
lock_ref_sha1_basic(): add a files_ref_store argument
lock_ref_for_update(): add a files_ref_store argument
commit_ref_update(): add a files_ref_store argument
lock_raw_ref(): add a files_ref_store argument
repack_without_refs(): add a files_ref_store argument
refs: make peel_ref() virtual
refs: make create_symref() virtual
refs: make pack_refs() virtual
refs: make verify_refname_available() virtual
refs: make read_raw_ref() virtual
...
"git am" has been taught to make an internal call to "git apply"'s
innards without spawning the latter as a separate process.
* cc/apply-am: (41 commits)
builtin/am: use apply API in run_apply()
apply: learn to use a different index file
apply: pass apply state to build_fake_ancestor()
apply: refactor `git apply` option parsing
apply: change error_routine when silent
usage: add get_error_routine() and get_warn_routine()
usage: add set_warn_routine()
apply: don't print on stdout in verbosity_silent mode
apply: make it possible to silently apply
apply: use error_errno() where possible
apply: make some parsing functions static again
apply: move libified code from builtin/apply.c to apply.{c,h}
apply: rename and move opt constants to apply.h
builtin/apply: rename option parsing functions
builtin/apply: make create_one_file() return -1 on error
builtin/apply: make try_create_file() return -1 on error
builtin/apply: make write_out_results() return -1 on error
builtin/apply: make write_out_one_result() return -1 on error
builtin/apply: make create_file() return -1 on error
builtin/apply: make add_index_file() return -1 on error
...
Teach "git blame" and "git annotate" the --compaction-heuristic and
--indent-heuristic options that are now supported by "git diff".
Also teach them to honor the `diff.compactionHeuristic` and
`diff.indentHeuristic` configuration options.
It would be conceivable to introduce separate configuration options for
"blame" and "annotate"; for example `blame.compactionHeuristic` and
`blame.indentHeuristic`. But it would be confusing to users if blame
output is inconsistent with diff output, so it makes more sense for them
to respect the same configuration.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Message cleanup.
* ah/misc-message-fixes:
unpack-trees: do not capitalize "working"
git-merge-octopus: do not capitalize "octopus"
git-rebase--interactive: fix English grammar
cat-file: put spaces around pipes in usage string
am: put spaces around pipe in usage string
"git pack-objects --include-tag" was taught that when we know that
we are sending an object C, we want a tag B that directly points at
C but also a tag A that points at the tag B. We used to miss the
intermediate tag B in some cases.
* jk/pack-tag-of-tag:
pack-objects: walk tag chains for --include-tag
t5305: simplify packname handling
t5305: use "git -C"
t5305: drop "dry-run" of unpack-objects
t5305: move cleanup into test block
Mark plural string for translation using Q_().
Although we already know that the plural sentence is always used in the
English source, other languages have complex plural rules they must
comply according to the value of MAX_REVS.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Spell the first word of messages in lowercase, following the usual
style.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark messages refuse_unconfigured_deny_msg and
refuse_unconfigured_deny_delete_current_msg for translation.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
That's the usual style.
Update one test to reflect these changes.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Spell the first word of such error messages in lowercase,
following the usual style.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark error messages for translation passed to die() function.
Change "Cannot" to lowercase following the usual style.
Reflect changes to test by using test_i18ngrep.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace uses of strbuf_addf() for adding strings with more lightweight
strbuf_addstr() calls. This makes the intent clearer and avoids
potential issues with printf format specifiers.
02962d3684 already converted six cases,
this patch covers eleven more.
A semantic patch for Coccinelle is included for easier checking for
new cases that might be introduced in the future.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the chmod option was added to git add, it was hooked up to the diff
machinery, meaning that it only works when the version in the index
differs from the version on disk.
As the option was supposed to mirror the chmod option in update-index,
which always changes the mode in the index, regardless of the status of
the file, make sure the option behaves the same way in git add.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As there are chmod options for both add and update-index, introduce a
new chmod_index_entry function to do the work. Use it in update-index,
while it will be used in add in the next patch.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Any text below the "-- " for the email signature gets treated as part of
the signature, and many mail clients will trim it from the quoted text
for a reply. Move it above the signature, so people can reply to it
more easily.
Similarly, when producing the patch as a MIME attachment, the
original code placed the base info after the attached part, which
would be discarded. Move the base info to the end of the part,
still inside the part boundary.
Add tests for the exact format of the email signature, and add tests
to ensure that the base info appears before the email signature when
producing a plain-text output, and that it appears before the part
boundary when producing a MIME attachment.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently there is no test checking the expected behaviour when multiple
chmod flags with different arguments are passed. As argument handling
is not in line with other git commands it's easy to miss and
accidentally change the current behaviour.
While there, fix the argument type of chmod_path, which takes an int,
but had a char passed in.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the fact that checkout_stage() and checkout_merged() don't
change the objects passed to them by adding the modifier const.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After we copy the templates into place, we re-read the
config in case we copied in a default config file. But since
git_config() is backed by a cache these days, it's possible
that the call will not actually touch the filesystem at all;
we need to tell it that something has changed behind the
scenes.
Note that we also need to reset the shared_repository
config. At first glance, it seems like this should probably
just be folded into git_config_clear(). But unfortunately
that is not quite right. The shared repository value may
come from config, _or_ it may have been set manually. So
only the caller who knows whether or not they set it is the
one who can clear it (and indeed, if you _do_ put it into
git_config_clear(), then many tests fail, as we have to
clear the config cache any time we set a new config
variable).
There are three tests here. The first two actually pass
already, though it's largely luck: they just don't happen to
actually read any config before we enter the new repo.
But the third one does fail without this patch; we look at
core.sharedrepository while creating the directory, but need
to make sure the value from the template config overrides
it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-init may copy "config" from the templates directory and
then re-read it. There are some comments explaining what's
going on here, but they are not grouped very well with the
matching code. Let's rearrange and expand them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we see an explicit "--no-index", we do not bother calling
setup_git_directory_gently() at all. This means that we may
miss out on reading repo-specific config.
It's arguable whether this is correct or not. If we were
designing from scratch, making "git diff --no-index"
completely ignore the repository makes some sense. But we
are nowhere near scratch, so let's look at the existing
behavior:
1. If you're in the top-level of a repository and run an
explicit "diff --no-index", the config subsystem falls
back to reading ".git/config", and we will respect repo
config.
2. If you're in a subdirectory of a repository, then we
still try to read ".git/config", but it generally
doesn't exist. So "diff --no-index" there does not
respect repo config.
3. If you have $GIT_DIR set in the environment, we read
and respect $GIT_DIR/config,
4. If you run "git diff /tmp/foo /tmp/bar" to get an
implicit no-index, we _do_ run the repository setup,
and set $GIT_DIR (or respect an existing $GIT_DIR
variable). We find the repo config no matter where we
started, and respect it.
So we already respect the repository config in a number of
common cases, and case (2) is the only one that does not.
And at least one of our tests, t4034, depends on case (1)
behaving as it does now (though it is just incidental, not
an explicit test for this behavior).
So let's bring case (2) in line with the others by always
running the repository setup, even with an explicit
"--no-index". We shouldn't need to change anything else, as the
implicit case already handles the prefix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can invoke no-index mode in two ways: by an explicit
request from the user, or implicitly by noticing that we
have two paths, and at least one is outside the repository.
If the user already told us --no-index, there is no need for
us to do the implicit test at all. However, we currently
do, and downgrade our "explicit" to DIFF_NO_INDEX_IMPLICIT.
This doesn't have any user-visible behavior, though it's not
immediately obvious why. We only trigger the implicit check
when we have exactly two non-option arguments. And the only
code that cares about implicit versus explicit is an error
message that we show when we _don't_ have two non-option
arguments.
However, it's worth fixing anyway. Besides being slightly
more efficient, it makes the code easier to follow, which
will help when we modify it in future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "hash-object" is run without "-w", we don't need to be
in a git repository at all; we can just hash the object and
write its sha1 to stdout. However, if we _are_ in a git
repository, we would want to know that so we can follow the
normal rules for respecting config, .gitattributes, etc.
This happens to work at the top-level of a git repository
because we blindly read ".git/config", but as the included
test shows, it does not work when you are in a subdirectory.
The solution is to just do a "gentle" setup in this case. We
already take care to use prefix_filename() on any filename
arguments we get (to handle the "-w" case), so we don't need
to do anything extra to handle the side effects of repo
setup.
An alternative would be to specify RUN_SETUP_GENTLY for this
command in git.c, and then die if "-w" is set but we are not
in a repository. However, the error messages generated at
the time of setup_git_directory() are more detailed, so it's
better to find out which mode we are in, and then call the
appropriate function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git symbolic-ref -d HEAD" happily removes the symbolic ref, but
the resulting repository becomes an invalid one. Teach the command
to forbid removal of HEAD.
* jc/forbid-symbolic-ref-d-HEAD:
symbolic-ref -d: do not allow removal of HEAD
Extract a small helper out of the function that reads the authors
script file "git am" internally uses.
* jc/am-read-author-file:
am: refactor read_author_script()
The "git diff --submodule={short,log}" mechanism has been enhanced
to allow "--submodule=diff" to show the patch between the submodule
commits bound to the superproject.
* jk/diff-submodule-diff-inline:
diff: teach diff to display submodule difference with an inline diff
submodule: refactor show_submodule_summary with helper function
submodule: convert show_submodule_summary to use struct object_id *
allow do_submodule_path to work even if submodule isn't checked out
diff: prepare for additional submodule formats
graph: add support for --line-prefix on all graph-aware output
diff.c: remove output_prefix_length field
cache: add empty_tree_oid object and helper function
Starting from 6b8fda2d (pack-objects: use bitmaps when packing objects)
if a repository has bitmap index, pack-objects can nicely speedup
"Counting objects" graph traversal phase. That however was done only for
case when resultant pack is sent to stdout, not written into a file.
The reason here is for on-disk repack by default we want:
- to produce good pack (with bitmap index not-yet-packed objects are
emitted to pack in suboptimal order).
- to use more robust pack-generation codepath (avoiding possible
bugs in bitmap code and possible bitmap index corruption).
Jeff King further explains:
The reason for this split is that pack-objects tries to determine how
"careful" it should be based on whether we are packing to disk or to
stdout. Packing to disk implies "git repack", and that we will likely
delete the old packs after finishing. We want to be more careful (so
as not to carry forward a corruption, and to generate a more optimal
pack), and we presumably run less frequently and can afford extra CPU.
Whereas packing to stdout implies serving a remote via "git fetch" or
"git push". This happens more frequently (e.g., a server handling many
fetching clients), and we assume the receiving end takes more
responsibility for verifying the data.
But this isn't always the case. One might want to generate on-disk
packfiles for a specialized object transfer. Just using "--stdout" and
writing to a file is not optimal, as it will not generate the matching
pack index.
So it would be useful to have some way of overriding this heuristic:
to tell pack-objects that even though it should generate on-disk
files, it is still OK to use the reachability bitmaps to do the
traversal.
So we can teach pack-objects to use bitmap index for initial object
counting phase when generating resultant pack file too:
- if we take care to not let it be activated under git-repack:
See above about repack robustness and not forward-carrying corruption.
- if we know bitmap index generation is not enabled for resultant pack:
The current code has singleton bitmap_git, so it cannot work
simultaneously with two bitmap indices.
We also want to avoid (at least with current implementation)
generating bitmaps off of bitmaps. The reason here is: when generating
a pack, not-yet-packed objects will be emitted into pack in
suboptimal order and added to tail of the bitmap as "extended entries".
When the resultant pack + some new objects in associated repository
are in turn used to generate another pack with bitmap, the situation
repeats: new objects are again not emitted optimally and just added to
bitmap tail - not in recency order.
So the pack badness can grow over time when at each step we have
bitmapped pack + some other objects. That's why we want to avoid
generating bitmaps off of bitmaps, not to let pack badness grow.
- if we keep pack reuse enabled still only for "send-to-stdout" case:
Because pack-to-file needs to generate index for destination pack, and
currently on pack reuse raw entries are directly written out to the
destination pack by write_reused_pack(), bypassing needed for pack index
generation bookkeeping done by regular codepath in write_one() and
friends.
( In the future we might teach pack-reuse code about cases when index
also needs to be generated for resultant pack and remove
pack-reuse-only-for-stdout limitation )
This way for pack-objects -> file we get nice speedup:
erp5.git[1] (~230MB) extracted from ~ 5GB lab.nexedi.com backup
repository managed by git-backup[2] via
time echo 0186ac99 | git pack-objects --revs erp5pack
before: 37.2s
after: 26.2s
And for `git repack -adb` packed git.git
time echo 5c589a73 | git pack-objects --revs gitpack
before: 7.1s
after: 3.6s
i.e. it can be 30% - 50% speedup for pack extraction.
git-backup extracts many packs on repositories restoration. That was my
initial motivation for the patch.
[1] https://lab.nexedi.com/nexedi/erp5
[2] https://lab.nexedi.com/kirr/git-backup
NOTE
Jeff also suggests that pack.useBitmaps was probably a mistake to
introduce originally. This way we are not adding another config point,
but instead just always default to-file pack-objects not to use bitmap
index: Tools which need to generate on-disk packs with using bitmap, can
pass --use-bitmap-index explicitly. And git-repack does never pass
--use-bitmap-index, so this way we can be sure regular on-disk repacking
remains robust.
NOTE2
`git pack-objects --stdout >file.pack` + `git index-pack file.pack` is much slower
than `git pack-objects file.pack`. Extracting erp5.git pack from
lab.nexedi.com backup repository:
$ time echo 0186ac99 | git pack-objects --stdout --revs >erp5pack-stdout.pack
real 0m22.309s
user 0m21.148s
sys 0m0.932s
$ time git index-pack erp5pack-stdout.pack
real 0m50.873s <-- more than 2 times slower than time to generate pack itself!
user 0m49.300s
sys 0m1.360s
So the time for
`pack-object --stdout >file.pack` + `index-pack file.pack` is 72s,
while
`pack-objects file.pack` which does both pack and index is 27s.
And even
`pack-objects --no-use-bitmap-index file.pack` is 37s.
Jeff explains:
The packfile does not carry the sha1 of the objects. A receiving
index-pack has to compute them itself, including inflating and applying
all of the deltas.
that's why for `git-backup restore` we want to teach `git pack-objects
file.pack` to use bitmaps instead of using `git pack-objects --stdout
>file.pack` + `git index-pack file.pack`.
NOTE3
The speedup is now tracked via t/perf/p5310-pack-bitmaps.sh
Test 56dfeb62 this tree
--------------------------------------------------------------------------------
5310.2: repack to disk 8.98(8.05+0.29) 9.05(8.08+0.33) +0.8%
5310.3: simulated clone 2.02(2.27+0.09) 2.01(2.25+0.08) -0.5%
5310.4: simulated fetch 0.81(1.07+0.02) 0.81(1.05+0.04) +0.0%
5310.5: pack to file 7.58(7.04+0.28) 7.60(7.04+0.30) +0.3%
5310.6: pack to file (bitmap) 7.55(7.02+0.28) 3.25(2.82+0.18) -57.0%
5310.8: clone (partial bitmap) 1.83(2.26+0.12) 1.82(2.22+0.14) -0.5%
5310.9: pack to file (partial bitmap) 6.86(6.58+0.30) 2.87(2.74+0.20) -58.2%
More context:
http://marc.info/?t=146792101400001&r=1&w=2http://public-inbox.org/git/20160707190917.20011-1-kirr@nexedi.com/T/#t
Cc: Vicent Marti <tanoku@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 6b8fda2d (pack-objects: use bitmaps when packing objects) there
are two codepaths in pack-objects: with & without using bitmap
reachability index.
However add_object_entry_from_bitmap(), despite its non-bitmapped
counterpart add_object_entry(), in no way does check for whether --local
or --honor-pack-keep or --incremental should be respected. In
non-bitmapped codepath this is handled in want_object_in_pack(), but
bitmapped codepath has simply no such checking at all.
The bitmapped codepath however was allowing to pass in all those options
and with bitmap indices still being used under such conditions -
potentially giving wrong output (e.g. including objects from non-local or
.keep'ed pack).
We can easily fix this by noting the following: when an object comes to
add_object_entry_from_bitmap() it can come for two reasons:
1. entries coming from main pack covered by bitmap index, and
2. object coming from, possibly alternate, loose or other packs.
"2" can be already handled by want_object_in_pack() and to cover
"1" we can teach want_object_in_pack() to expect that *found_pack can be
non-NULL, meaning calling client already found object's pack entry.
In want_object_in_pack() we care to start the checks from already found
pack, if we have one, this way determining the answer right away
in case neither --local nor --honour-pack-keep are active. In
particular, as p5310-pack-bitmaps.sh shows (3 consecutive runs), we do
not do harm to served-with-bitmap clones performance-wise:
Test 56dfeb62 this tree
-----------------------------------------------------------------
5310.2: repack to disk 9.08(8.20+0.25) 9.09(8.14+0.32) +0.1%
5310.3: simulated clone 1.92(2.12+0.08) 1.93(2.12+0.09) +0.5%
5310.4: simulated fetch 0.82(1.07+0.04) 0.82(1.06+0.04) +0.0%
5310.6: partial bitmap 1.96(2.42+0.13) 1.95(2.40+0.15) -0.5%
Test 56dfeb62 this tree
-----------------------------------------------------------------
5310.2: repack to disk 9.11(8.16+0.32) 9.11(8.19+0.28) +0.0%
5310.3: simulated clone 1.93(2.14+0.07) 1.92(2.11+0.10) -0.5%
5310.4: simulated fetch 0.82(1.06+0.04) 0.82(1.04+0.05) +0.0%
5310.6: partial bitmap 1.95(2.38+0.16) 1.94(2.39+0.14) -0.5%
Test 56dfeb62 this tree
-----------------------------------------------------------------
5310.2: repack to disk 9.13(8.17+0.31) 9.07(8.13+0.28) -0.7%
5310.3: simulated clone 1.92(2.13+0.07) 1.91(2.12+0.06) -0.5%
5310.4: simulated fetch 0.82(1.08+0.03) 0.82(1.08+0.03) +0.0%
5310.6: partial bitmap 1.96(2.43+0.14) 1.96(2.42+0.14) +0.0%
with delta timings showing they are all within noise from run to run.
In the general case we do not want to call find_pack_entry_one() more than
once, because it is expensive. This patch splits the loop in
want_object_in_pack() into two parts: finding the object and seeing if it
impacts our choice to include it in the pack. We may call the inexpensive
want_found_object() twice, but we will never call find_pack_entry_one() if we
do not need to.
I appreciate help and discussing this change with Junio C Hamano and
Jeff King.
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, --batch can be combined with --textconv or --filters.
For this to work, the input needs to have the form
<object name><single white space><path>
so that the filters can be chosen appropriately.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are circumstances when it is relatively easy to figure out the
object name for a given path, but not the name of the containing tree.
For example, when looking at a diff generated by Git, the object names
are recorded, but not the revision. As a matter of fact, the revisions
from which the diff was generated may not even exist locally.
In such a case, the user would have to generate a fake revision just to
be able to use --textconv or --filters.
Let's simplify this dramatically, because we do not really need that
revision at all: all we care about is that we know the path. In the
scenario described above, we do know the path, and we just want to
specify it separately from the object name.
Example usage:
git cat-file --textconv --path=main.c 0f1937fd
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --filters option applies the convert_to_working_tree() filter for
the path when showing the contents of a regular file blob object;
the contents are written out as-is for other types of objects.
This feature comes in handy when a 3rd-party tool wants to work with
the contents of files from past revisions as if they had been checked
out, but without detouring via temporary files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alternate refs backends might not need the refs/heads directory and so
on, so we make ref db initialization part of the backend.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --resurse-submodules --reference $path $URL" is a way to
reduce network transfer cost by borrowing objects in an existing
$path repository when cloning the superproject from $URL; it
learned to also peek into $path for presense of corresponding
repositories of submodules and borrow objects from there when able.
* sb/submodule-clone-rr:
clone: recursive and reference option triggers submodule alternates
clone: implement optional references
clone: clarify option_reference as required
clone: factor out checking for an alternate path
submodule--helper update-clone: allow multiple references
submodule--helper module-clone: allow multiple references
t7408: merge short tests, factor out testing method
t7408: modernize style
Enhance "git status --porcelain" output by collecting more data on
the state of the index and the working tree files, which may
further be used to teach git-prompt (in contrib/) to make fewer
calls to git.
* jh/status-v2-porcelain:
status: unit tests for --porcelain=v2
test-lib-functions.sh: add lf_to_nul helper
git-status.txt: describe --porcelain=v2 format
status: print branch info with --porcelain=v2 --branch
status: print per-file porcelain v2 status data
status: collect per-file data for --porcelain=v2
status: support --porcelain[=<version>]
status: cleanup API to wt_status_print
status: rename long-format print routines
"git nosuchcommand --help" said "No manual entry for gitnosuchcommand",
which was not intuitive, given that "git nosuchcommand" said "git:
'nosuchcommand' is not a git command".
* rt/help-unknown:
help: make option --help open man pages only for Git commands
help: introduce option --exclude-guides
An incoming "git push" that attempts to push too many bytes can now
be rejected by setting a new configuration variable at the receiving
end.
* cc/receive-pack-limit:
receive-pack: allow a maximum input size to be specified
unpack-objects: add --max-input-size=<size> option
index-pack: add --max-input-size=<size> option
"git format-patch --cover-letter HEAD^" to format a single patch
with a separate cover letter now numbers the output as [PATCH 0/1]
and [PATCH 1/1] by default.
* jk/format-patch-number-singleton-patch-with-cover:
format-patch: show 0/1 and 1/1 for singleton patch with cover letter
On Windows, help.browser configuration variable used to be ignored,
which has been corrected.
* js/no-html-bypass-on-windows:
Revert "display HTML in default browser using Windows' shell API"
"git checkout --detach <branch>" used to give the same advice
message as that is issued when "git checkout <tag>" (or anything
that is not a branch name) is given, but asking with "--detach" is
an explicit enough sign that the user knows what is going on. The
advice message has been squelched in this case.
* sb/checkout-explit-detach-no-advice:
checkout: do not mention detach advice for explicit --detach option
"git mv dir non-existing-dir/" did not work in some environments
the same way as existing mainstream platforms. The code now moves
"dir" to "non-existing-dir", without relying on rename("A", "B/")
that strips the trailing slash of '/'.
* js/mv-dir-to-new-directory:
git mv: do not keep slash in `git mv dir non-existing-dir/`
The reflog output format is documented better, and a new format
--date=unix to report the seconds-since-epoch (without timezone)
has been added.
* jk/reflog-date:
date: clarify --date=raw description
date: add "unix" format
date: document and test "raw-local" mode
doc/pretty-formats: explain shortening of %gd
doc/pretty-formats: describe index/time formats for %gd
doc/rev-list-options: explain "-g" output formats
doc/rev-list-options: clarify "commit@{Nth}" for "-g" option
This makes the style a little more consistent with other usage strings,
and will resolve a warning at
https://www.softcatala.org/recursos/quality/git.html
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the style a little more consistent with other usage strings,
and will resolve a warning at
https://www.softcatala.org/recursos/quality/git.html
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert uses of unsigned char [20] to struct object_id. Rename the
generically-named "ptr" to "old_oid" and make it const.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the callers of this function use struct object_id, so rename it
to get_oid_mb and make it take struct object_id instead of
unsigned char *.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all functions to use struct object_id, and replace instances of
hardcoded 40, 41, and 42 with appropriate references to GIT_SHA1_HEXSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert this file to use struct object_id, and additionally convert some
uses of the constant 40 to GIT_SHA1_HEXSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since all of its callers have been updated, convert read_mmblob to take
a pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all the static functions that are not callbacks to struct
object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since all of its callers have been updated, modify stream_blob_to_fd to
take a struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since all of its callers have been updated, make textconv_object take a
struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all of the static functions that are not callbacks to use struct
object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct cache_entry to use struct object_id by applying the
following semantic patch and the object_id transforms from contrib,
plus the actual change to the struct:
@@
struct expand_data E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct expand_data *E1;
@@
- E1->sha1
+ E1->oid.hash
@@
struct expand_data E1;
@@
- E1.delta_base_sha1
+ E1.delta_base_oid.hash
@@
struct expand_data *E1;
@@
- E1->delta_base_sha1
+ E1->delta_base_oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct origin to use struct object_id by applying the
following semantic patch and the object_id transforms from contrib,
plus the actual change to the struct:
@@
struct origin E1;
@@
- E1.blob_sha1
+ E1.blob_oid.hash
@@
struct origin *E1;
@@
- E1->blob_sha1
+ E1->blob_oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were several static functions using unsigned char arrays for SHA-1
values. Convert them to use struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct cache_entry to use struct object_id by applying the
following semantic patch and the object_id transforms from contrib, plus
the actual change to the struct:
@@
struct cache_entry E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct cache_entry *E1;
@@
- E1->sha1
+ E1->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces run_apply() implementation with a new one that
uses the apply API that has been previously prepared in
apply.c and apply.h.
This shoud improve performance a lot in certain cases.
As the previous implementation was creating a new `git apply`
process to apply each patch, it could be slow on systems like
Windows where it is costly to create new processes.
Also the new `git apply` process had to read the index from
disk, and when the process was done the calling process
discarded its own index and read back from disk the new
index that had been created by the `git apply` process.
This could be very inefficient with big repositories that
have big index files, especially when the system decided
that it was a good idea to run the `git apply` processes on
a different processor core.
Also eliminating index reads enables further performance
improvements by using:
`git update-index --split-index`
For example here is a benchmark of a multi hundred commit
rebase on the Linux kernel on a Debian laptop with SSD:
command: git rebase --onto 1993b17 52bef0c 29dde7c
Vanilla "next" without split index: 1m54.953s
Vanilla "next" with split index: 1m22.476s
This series on top of "next" without split index: 1m12.034s
This series on top of "next" with split index: 0m15.678s
(using branch "next" from mid April 2016.)
Benchmarked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parsing `git apply` options can be useful to other commands that
want to call the libified apply functionality, because this way
they can easily pass some options from their own command line to
the libified apply functionality.
This will be used by `git am` in a following patch.
To make this possible, let's refactor the `git apply` option
parsing code into a new libified apply_parse_options() function.
Doing that makes it possible to remove some functions definitions
from "apply.h" and make them static in "apply.c".
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes 'int apply_verbosely' into 'enum apply_verbosity', and
changes the possible values of the variable from a bool to
a tristate.
The previous 'false' state is changed into 'verbosity_normal'.
The previous 'true' state is changed into 'verbosity_verbose'.
The new added state is 'verbosity_silent'. It should prevent
anything to be printed on both stderr and stdout.
This is needed because `git am` wants to first call apply
functionality silently, if it can then fall back on 3-way merge
in case of error.
Printing on stdout, and calls to warning() or error() are not
taken care of in this patch, as that will be done in following
patches.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As most of the apply code in builtin/apply.c has been libified by a number of
previous commits, it can now be moved to apply.{c,h}, so that more code can
use it.
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The constants for the "inaccurate-eof" and the "recount" options will
be used in both "apply.c" and "builtin/apply.c", so they need to go
into "apply.h", and therefore they need a name that is more specific
to the API they belong to.
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As these functions are going to be part of the libified
apply API, let's give them a name that is more specific
to the apply API.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To libify `git apply` functionality we have to signal errors to the
caller instead of exit()ing.
To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", create_one_file() should return -1 instead of
calling exit().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing.
To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", try_create_file() should return -1 in case of
error.
Unfortunately try_create_file() currently returns -1 to signal a
recoverable error. To fix that, let's make it return 1 in case of
a recoverable error and -1 in case of an unrecoverable error.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pack-objects is given --include-tag, it peels each tag
ref down to a non-tag object, and if that non-tag object is
going to be packed, we include the tag, too. But what
happens if we have a chain of tags (e.g., tag "A" points to
tag "B", which points to commit "C")?
We'll peel down to "C" and realize that we want to include
tag "A", but we do not ever consider tag "B", leading to a
broken pack (assuming "B" was not otherwise selected).
Instead, we have to walk the whole chain, adding any tags we
find to the pack.
Interestingly, it doesn't seem possible to trigger this
problem with "git fetch", but you can with "git clone
--single-branch". The reason is that we generate the correct
pack when the client explicitly asks for "A" (because we do
a real reachability analysis there), and "fetch" is more
willing to do so. There are basically two cases:
1. If "C" is already a ref tip, then the client can deduce
that it needs "A" itself (via find_non_local_tags), and
will ask for it explicitly rather than relying on the
include-tag capability. Everything works.
2. If "C" is not already a ref tip, then we hope for
include-tag to send us the correct tag. But it doesn't;
it generates a broken pack. However, the next step is
to do a follow-up run of find_non_local_tags(),
followed by fetch_refs() to backfill any tags we
learned about.
In the normal case, fetch_refs() calls quickfetch(),
which does a connectivity check and sees we have no
new objects to fetch. We just write the refs.
But for the broken-pack case, the connectivity check
fails, and quickfetch will follow-up with the remote,
asking explicitly for each of the ref tips. This picks
up the missing object in a new pack.
For a regular "git clone", we are similarly OK, because we
explicitly request all of the tag refs, and get a correct
pack. But with "--single-branch", we kick in tag
auto-following via "include-tag", but do _not_ do a
follow-up backfill. We just take whatever the server sent us
via include-tag and write out tag refs for any tag objects
we were sent. So prior to c6807a4 (clone: open a shortcut
for connectivity check, 2013-05-26), we actually claimed the
clone was a success, but the result was silently
corrupted! Since c6807a4, index-pack's connectivity
check catches this case, and we correctly complain.
The included test directly checks that pack-objects does not
generate a broken pack, but also confirms that "clone
--single-branch" does not hit the bug.
Note that tag chains introduce another interesting question:
if we are packing the tag "B" but not the commit "C", should
"A" be included?
Both before and after this patch, we do not include "A",
because the initial peel_ref() check only knows about the
bottom-most level, "C". To realize that "B" is involved at
all, we would have to switch to an incremental peel, in
which we examine each tagged object, asking if it is being
packed (and including the outer tag if so).
But that runs contrary to the optimizations in peel_ref(),
which avoid accessing the objects at all, in favor of using
the value we pull from packed-refs. It's OK to walk the
whole chain once we know we're going to include the tag (we
have to access it anyway, so the effort is proportional to
the pack we're generating). But for the initial selection,
we have to look at every ref. If we're only packing a few
objects, we'd still have to parse every single referenced
tag object just to confirm that it isn't part of a tag
chain.
This could be addressed if packed-refs stored the complete
tag chain for each peeled ref (in most cases, this would be
the same cost as now, as each "chain" is only a single
link). But given the size of that project, it's out of scope
for this fix (and probably nobody cares enough anyway, as
it's such an obscure situation). This commit limits itself
to just avoiding the creation of a broken pack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you delete the symbolic-ref HEAD from a repository, Git no longer
considers the repository valid, and even "git symbolic-ref HEAD
refs/heads/master" would not be able to recover from that state
(although "git init" can, but that is a sure sign that you are
talking about a "broken" repository).
In the spirit similar to afe5d3d5 ("symbolic ref: refuse non-ref
targets in HEAD", 2009-01-29), forbid removal of HEAD to avoid
corrupting a repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an extension to git-diff and git-log (and any other graph-aware
displayable output) such that "--line-prefix=<string>" will print the
additional line-prefix on every line of output.
To make this work, we have to fix a few bugs in the graph API that force
graph_show_commit_msg to be used only when you have a valid graph.
Additionally, we extend the default_diff_output_prefix handler to work
even when no graph is enabled.
This is somewhat of a hack on top of the graph API, but I think it
should be acceptable here.
This will be used by a future extension of submodule display which
displays the submodule diff as the actual diff between the pre and post
commit in the submodule project.
Add some tests for both git-log and git-diff to ensure that the prefix
is honored correctly.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce option --exclude-guides to the help command. With this option
being passed, "git help" will open man pages only for actual commands.
Since we know it is a command, we can use function help_unknown_command
to give the user advice on typos.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By splitting the part that reads from a file and the part that
parses the variable definitions from the contents, make the latter
can be more reusable in the future.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 3b75ee9 ("blame: allow to blame paths freshly added to the index",
2016-07-16) git blame also looks at the index to determine if there is a
file that was freshly added to the index.
cache_name_pos returns -pos - 1 in case there is no match is found, or
if the name matches, but the entry has a stage other than 0. As git
blame should work for unmerged files, it uses strcmp to determine
whether the name of the returned position matches, in which case the
file exists, but is merely unmerged, or if the file actually doesn't
exist in the index.
If the repository is empty, or if the file would lexicographically be
sorted as the last file in the repository, -cache_name_pos - 1 is
outside of the length of the active_cache array, causing git blame to
segfault. Guard against that, and die() normally to restore the old
behaviour.
Reported-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, help.browser configuration variable used to be ignored,
which has been corrected.
* js/no-html-bypass-on-windows:
Revert "display HTML in default browser using Windows' shell API"
Receive-pack feeds its input to either index-pack or
unpack-objects, which will happily accept as many bytes as
a sender is willing to provide. Let's allow an arbitrary
cutoff point where we will stop writing bytes to disk.
Cleaning up what has already been written to disk is a
related problem that is not addressed by this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receiving a pack-file, it can be useful to abort the
`git unpack-objects`, if the pack-file is too big.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receiving a pack-file, it can be useful to abort the
`git index-pack`, if the pack-file is too big.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the default behavior of git-format-patch to generate numbered
sequence of 0/1 and 1/1 when generating both a cover-letter and a single
patch. This standardizes the cover letter to have 0/N which helps
distinguish the cover letter from the patch itself. Since the behavior
is easily changed via configuration as well as the use of -n and -N this
should be acceptable default behavior.
Add tests for the new default behavior.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout --detach <branch>" used to give the same advice
message as that is issued when "git checkout <tag>" (or anything
that is not a branch name) is given, but asking with "--detach" is
an explicit enough sign that the user knows what is going on. The
advice message has been squelched in this case.
* sb/checkout-explit-detach-no-advice:
checkout: do not mention detach advice for explicit --detach option
Since 4804aab (help (Windows): Display HTML in default browser using
Windows' shell API, 2008-07-13), Git for Windows used to call
`ShellExecute()` to launch the default Windows handler for `.html`
files.
The idea was to avoid going through a shell script, for performance
reasons.
However, this change ignores the `help.browser` config setting. Together
with browsing help not being a performance-critical operation, let's
just revert that patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
