* da/pretty-tempname:
diff: generate pretty filenames in prep_temp_blob()
compat: add a basename() compatibility function
compat: add a mkstemps() compatibility function
Conflicts:
Makefile
This simplifies the logic of rev_compare_tree() by removing a special
case.
It does so by turning the special case of finding a diff to be "all new
files" into a more generic case of "all new" vs "all removed" vs "mixed
changes", so now the code is actually more powerful and more generic, and
the added symmetry actually makes it simpler too.
This makes no changes to any existing behavior, but apart from the
simplification it does make it possible to some day care about whether all
changes were just deletions if we want to. Which we may well want to for
merge handling.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
blame: correctly handle a path that used to be a directory
add -i: do not dump patch during application
Update draft release notes for 1.6.3.2
grep: fix colouring of matches with zero length
Documentation: teach stash/pop workflow instead of stash/apply
Change xdl_merge to generate output even for null merges
t6023: merge-file fails to output anything for a degenerate merge
When trying to see if the same path exists in the parent, we ran
"diff-tree" with pathspec set to the path we are interested in with the
parent, and expect either to have exactly one resulting filepair (either
"changed from the parent", "created when there was none") or nothing (when
there is no change from the parent).
If the path used to be a directory, however, we will also see unbounded
number of entries that talk about the files that used to exist underneath
the directory in question. Correctly pick only the entry that describes
the path we are interested in in such a case (namely, the creation of the
path as a regular file).
Noticed by Ben Willard.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a debugging print that snuck in at 7a26e65 (Revert
"git-add--interactive: remove hunk coalescing", 2009-05-16).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git submodule update --merge' merges the commit referenced by the
superproject into your local branch, instead of checking it out on
a detached HEAD.
As evidenced by the addition of "git submodule update --rebase", it
is useful to provide alternatives to the default 'checkout' behaviour
of "git submodule update". One such alternative is, when updating a
submodule to a new commit, to merge that commit into the current
local branch in that submodule. This is useful in workflows where
you want to update your submodule from its upstream, but you cannot
use --rebase, because you have downstream people working on top of
your submodule branch, and you don't want to disrupt their work.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The addition of "submodule.<name>.rebase" demonstrates the usefulness of
alternatives to the default behaviour of "git submodule update". However,
by naming the config variable "submodule.<name>.rebase", and making it a
boolean choice, we are artificially constraining future git versions that
may want to add _more_ alternatives than just "rebase".
Therefore, while "submodule.<name>.rebase" is not yet in a stable git
release, future-proof it, by changing it from
submodule.<name>.rebase = true/false
to
submodule.<name>.update = rebase/checkout
where "checkout" specifies the default behaviour of "git submodule update"
(checking out the new commit to a detached HEAD), and "rebase" specifies
the --rebase behaviour (where the current local branch in the submodule is
rebase onto the new commit). Thus .update == checkout is equivalent to
.rebase == false, and .update == rebase is equivalent to .rebase == true.
Finally, leaving .update unset is equivalent to leaving .rebase unset.
In future git versions, other alternatives to "git submodule update"
behaviour can be included by adding them to the list of allowable values
for the submodule.<name>.update variable.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/maint-1.6.0-xdl-merge-fix:
Change xdl_merge to generate output even for null merges
t6023: merge-file fails to output anything for a degenerate merge
Conflicts:
xdiff/xmerge.c
* jc/maint-add-p-coalesce-fix:
t3701: ensure correctly set up repository after skipped tests
Revert "git-add--interactive: remove hunk coalescing"
Splitting a hunk that adds a line at the top fails in "add -p"
Previously, die() would report the exit code of stop_httpd. Instead,
save and reset the exit code before dying.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit trap should not be removed in case tests require cleanup code. This
is especially important if tests are executed with the --immediate option.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, unknown options would be ignored, including any subsequent
valid options.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a zero-length match is encountered, break out of loop and show the rest
of the line uncoloured. Otherwise we'd be looping forever, trying to make
progress by advancing the pointer by zero characters.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following is an easy mistake to make for users coming from version
control systems with an "update and commit"-style workflow.
1. git pull
2. resolve conflicts
3. git pull
Step 3 overrides MERGE_HEAD, starting a new merge with dirty index.
IOW, probably not what the user intended. Instead, refuse to merge
again if a merge is in progress.
Reported-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid code duplication by moving list tail search to match_refs().
This does not change the semantics, except for http-push, which now inserts
to the front of the ref list in order to get rid of the global remote_tail.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Copy the description of date-order from rev-list-options.txt, and then
reword it to be commit specific. While we're at it, put <rev> <glob>...
on a new line to not exceed 80 characters.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard allocator on Windows is pretty bad prior
to Windows Vista, and nedmalloc is better than the
modified dlmalloc provided with newer versions of the
MinGW libc.
NedMalloc stats in Git
----------------------
All results are the best result out of 3 runs. The
benchmarks have been done on different hardware, so
the repack times are not comparable.
These benchmarks are all based on 'git repack -adf'
on the Linux kernel.
XP
-----------------------------------------------
MinGW Threads Total Time Speed
-----------------------------------------------
3.4.2 (1T) 00:12:28.422
3.4.2 + nedmalloc (1T) 00:07:25.437 1.68x
3.4.5 (1T) 00:12:20.718
3.4.5 + nedmalloc (1T) 00:07:24.809 1.67x
4.3.3-tdm (1T) 00:12:01.843
4.3.3-tdm + nedmalloc (1T) 00:07:16.468 1.65x
4.3.3-tdm (2T) 00:07:35.062
4.3.3-tdm + nedmalloc (2T) 00:04:57.874 1.54x
Vista
-----------------------------------------------
MinGW Threads Total Time Speed
-----------------------------------------------
4.3.3-tdm (1T) 00:07:40.844
4.3.3-tdm + nedmalloc (1T) 00:07:17.548 1.05x
4.3.3-tdm (2T) 00:05:33.746
4.3.3-tdm + nedmalloc (2T) 00:05:27.334 1.02x
Mac Mini
-----------------------------------------------
GCC Threads Total Time Speed
-----------------------------------------------
i686-darwin9-4.0.1 (2T) 00:09:57.346
i686-darwin9-4.0.1+ned (2T) 00:08:51.072 1.12x
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original readdir implementation was fast, but didn't
support the d_type. This means that git would do additional
lstats for each entry, to figure out if the entry was a
directory or not. This unneedingly slowed down many
operations, since Windows API provides this information
directly when walking the directories.
By running this implementation on Moe's repo structure:
mkdir bummer && cd bummer; for ((i=0;i<100;i++)); do
mkdir $i && pushd $i;
for ((j=0;j<1000;j++)); do echo "$j" >$j; done;
popd;
done
We see the following speedups:
git add .
-------------------
old: 00:00:23(.087)
new: 00:00:21(.512) 1.07x
git status
-------------------
old: 00:00:03(.306)
new: 00:00:01(.684) 1.96x
git clean -dxf
-------------------
old: 00:00:01(.918)
new: 00:00:00(.295) 6.50x
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OpenSSH uses -p to specify custom ports, while PuTTY plink and
TortoisePlink use -P. Git now detects if plink is in GIT_SSH and
modify its flags as necessary.
We call plink with -batch, so that it will error out with an error
message instead of waiting for user input. As reported in msysGit
issue 96, plink wants to interact with the user asking if a host
key should be accepted, but this just blocks the terminal, since
plink tries to get the answer from stdin. However, stdin is
already connected to Git that wants to send input to the remote
command.
But we do not pass -batch to TortoisePlink, because TortoisePlink
uses a GUI to communicate with the user, and it does not understand
-batch.
Signed-off-by: Edward Z. Yang <edwardzyang@thewritingpot.com>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
msysGit issue 258 tracks a problem opening a browser onto file
paths that contain spaces or parentheses when calling the
web--browse script. This patch modifies how the start command is
called to solve this.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
conio.h provides the declaration.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows has problems changing the mtime when the file is write protected,
even by the owner of said file.
Add a Windows-only workaround to change the mode if necessary before
trying to change the mtime.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function FillConsoleOutputCharacterA() was pretty content in XP to take a NULL
pointer if we did not want to store the number of written columns. In Windows 7,
it crashes, but only when called from within Git Bash, not from within cmd.exe.
Go figure.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, we have to check whether there are scripts which would
override .exe files, but this check missed the "quietification".
Make now prints 'BUILTIN all' instead of a long chain of 'test || rm'
commands.
[spr: added clarification what make will print. ]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Naturally, prep_temp_blob() did not care about filenames.
As a result, GIT_EXTERNAL_DIFF and textconv generated
filenames such as ".diff_XXXXXX".
This modifies prep_temp_blob() to generate user-friendly
filenames when creating temporary files.
Diffing "name.ext" now generates "XXXXXX_name.ext".
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some systems such as Windows lack libgen.h so provide a
basename() implementation for cross-platform use.
This introduces the NO_LIBGEN_H construct to the Makefile
and autoconf scripts.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mkstemps() is a BSD extension so provide an implementation
for cross-platform use.
Signed-off-by: David Aguilar <davvid@gmail.com>
Tested-by: Johannes Sixt <j6t@kdbg.org> (Windows)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/show-branch-parse-options:
show-branch: migrate to parse-options API
parse-options: add PARSE_OPT_LITERAL_ARGHELP for complicated argh's
Conflicts:
parse-options.h
* jc/mktree:
mktree: validate entry type in input
mktree --batch: build more than one tree object
mktree --missing: updated usage message and man page
mktree --missing: allow missing objects
t1010: add mktree test
mktree: do not barf on a submodule commit
builtin-mktree.c: use a helper function to handle one line of input
mktree: use parse-options
build-in git-mktree
* ew/svn-test-and-old-i18n:
t8005: fix typo, it's ISO-8859-5, not KOI8-R
t8005: convert CP1251 character set to ISO8859-5
t8005: use more portable character encoding names
t5100: use ancient encoding syntax for backwards compatibility
t9301: use ISO8859-1 rather than ISO-8859-1
t3901: Use ISO8859-1 instead of ISO-8859-1 for backward compatibility
t3901: avoid negation on right hand side of '|'
builtin-mailinfo.c: use "ISO8859-1" instead of "latin1" as fallback encoding
builtin-mailinfo.c: compare character encodings case insensitively
Use 'UTF-8' rather than 'utf-8' everywhere for backward compatibility
t3900: use ancient iconv names for backward compatibility
* mw/send-email:
send-email: Remove superfluous `my $editor = ...'
send-email: 'References:' should only reference what is sent
send-email: Handle "GIT:" rather than "GIT: " during --compose
Docs: send-email: --smtp-server-port can take symbolic ports
Docs: send-email: Refer to CONFIGURATION section for sendemail.multiedit
Docs: send-email: Put options back into alphabetical order
* 'cc/bisect' (early part):
bisect: check ancestors without forking a "git rev-list" process
commit: add function to unparse a commit and its parents
bisect: rework some rev related functions to make them more reusable
When a path F that matches ignore pattern has a conflict, "git add F"
insisted the -f option be given, which did not make sense. It would have
required -f when the path was originally added, but when resolving a
conflict, it already is tracked.
So this should work (and does):
$ echo file >.gitignore
$ echo content >file
$ git add -f file ;# need -f because we are adding new path
$ echo more content >>file
$ git add file ;# don't need -f; it is not actually an "other" file
This is handled under the hood by the COLLECT_IGNORED option to
read_directory. When that code finds an ignored file, it checks the
index to make sure it is not actually a tracked file. However, the test
it uses does not take into account unmerged entries, and considers them
to still be ignored. "git ls-files" uses a more elaborate test and gets
the right answer and the same test should be used here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the description of "--ignore-errors" from git-add.txt as
inspiration.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent commits 8763dbb1 (completion: fix PS1 display during a
merge on detached HEAD, 2009-05-16), ff790b6a (completion: simplify
"current branch" in __git_ps1(), 2009-05-10), and d7107ca6
(completion: fix PS1 display during an AM on detached HEAD,
2009-05-26) ensure that the branch name in __git_ps1() is always set
to something sensible. Therefore, the condition for checking the
non-empty branch name is always fulfilled, and can be removed.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch can be applied to the work tree, the index or both, but the
short description made it look like it's always applied to both.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This resolves a semantic conflicts early to work with 5ae93df (t3900: use
ancient iconv names for backward compatibility, 2009-05-18).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent discussion on the list showed some comments in favour of a
stash/pop workflow:
http://marc.info/?l=git&m=124234911423358&w=2http://marc.info/?l=git&m=124235348327711&w=2
Change the stash documentation and examples to document pop in its own
right (and apply in terms of pop), and use stash/pop in the examples.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
