If we are checking out a file and somebody else racily deletes our file,
then we would write garbage to the cache entry. Fix that by checking
the result of the lstat() call on that file. Print an error to the user
if the file does not exist.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a caller of sha1_object_info_extended() sets the
"contentp" field in object_info, we call unpack_sha1_rest()
but do not check whether it signaled an error.
This causes two problems:
1. We pass back NULL to the caller via the contentp field,
but the function returns "0" for success. A caller
might reasonably expect after a successful return that
it can access contentp without a NULL check and
segfault.
As it happens, this is impossible to trigger in the
current code. There is exactly one caller which uses
contentp, read_object(). And the only thing it does
after a successful call is to return the content
pointer to its caller, using NULL as a sentinel for
errors. So in effect it converts the success code from
sha1_object_info_extended() back into an error!
But this is still worth addressing avoid problems for
future users of "contentp".
2. Callers of unpack_sha1_rest() are expected to close the
zlib stream themselves on error. Which means that we're
leaking the stream.
The problem in (1) comes from from c84a1f3ed4 (sha1_file:
refactor read_object, 2017-06-21), which added the contentp
field. Before that, we called unpack_sha1_rest() via
unpack_sha1_file(), which directly used the NULL to signal
an error.
But note that the leak in (2) is actually older than that.
The original unpack_sha1_file() directly returned the result
of unpack_sha1_rest() to its caller, when it should have
been closing the zlib stream itself on error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reported-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
lookup_blob() and lookup_tree() can return NULL if they find an object
of an unexpected type. Accessing the object member is undefined in that
case. Cast the result to a struct object pointer instead; we can do
that because object is the first member of all object types. This trick
is already used in other places in the code.
An error message is already shown by object_as_type(), which is called
by the lookup functions. The walk callback functions are expected to
handle NULL object pointers passed to them, but put_object_name() needs
a valid object, so avoid calling it without one.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2841e8f ("convert: add "status=delayed" to filter process protocol",
2017-06-30) we taught the filter process protocol to delay responses.
That means an external filter might answer in the first write_entry()
call on a file that requires filtering "I got your request, but I
can't answer right now. Ask again later!". As Git got no answer, we do
not write anything to the filesystem. Consequently, the lstat() call in
the finish block of the function writes garbage to the cache entry.
The garbage is eventually overwritten when the filter answers with
the final file content in a subsequent write_entry() call.
Fix the brief time window of garbage in the cache entry by adding a
special finish block that does nothing for delayed responses. The cache
entry is written properly in a subsequent write_entry() call where
the filter responds with the final file content.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Spell the name of our system as "Git" in the output from
request-pull script.
* ar/request-pull-phrasofix:
request-pull: capitalise "Git" to make it a proper noun
Add comment to clarify that the style file is meant to be used with
clang-5 and the rules are still work in progress.
* sb/git-clang-format:
clang-format: add a comment about the meaning/status of the
Code clean-up.
* rs/cleanup-strbuf-users:
graph: use strbuf_addchars() to add spaces
use strbuf_addstr() for adding strings to strbufs
path: use strbuf_add_real_path()
Code clean-up.
* rs/resolve-ref-optional-result:
refs: pass NULL to resolve_refdup() if hash is not needed
refs: pass NULL to refs_resolve_refdup() if hash is not needed
The checkpoint command "git fast-import" did not flush updates to
refs and marks unless at least one object was created since the
last checkpoint, which has been corrected, as these things can
happen without any new object getting created.
* er/fast-import-dump-refs-on-checkpoint:
fast-import: checkpoint: dump branches/tags/marks even if object_count==0
Peff points out that different atom parsers handle the empty
"sub-argument" list differently. An example of this is the format
"%(refname:)".
Since callers often use `string_list_split` (which splits the empty
string with any delimiter as a 1-ary string_list containing the empty
string), this makes handling empty sub-argument strings non-ergonomic.
Let's fix this by declaring that atom parser implementations must
not care about distinguishing between the empty string "%(refname:)"
and no sub-arguments "%(refname)". Current code aborts, either with
"unrecognised arg" (e.g. "refname:") or "does not take args"
(e.g. "body:") as an error message.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_release leaves the strbuf in a valid, initialized state, so
there is no need to call strbuf_init after it.
Moreover, this is not likely to change in the future: strbuf_release
leaving the strbuf in a valid state has been easy to maintain and has
been very helpful for Git's robustness and simplicity (e.g.,
preventing use-after-free vulnerabilities).
Document the semantics so the next generation of Git developers can
become familiar with them without reading the implementation. It is
still not advisable to call strbuf_release too often because it is
wasteful, so add a note pointing to strbuf_reset for that.
The same semantics apply to strbuf_detach. Add a similar note to its
docstring to make that clear.
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our documentation advises to not re-use a strbuf, after strbuf_release
has been called on it. Use the proper reset instead.
Currently 'strbuf_release' releases and re-initializes the strbuf, so it
is safe, but slow. 'strbuf_reset' only resets the internal length variable,
such that this could also be accounted for as a micro-optimization.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the argv is only allocated on the stack, and then assigned to
process->argv. When the start_subprocess function goes out of scope,
the local argv variable is eliminated from the stack, but the pointer is
still kept around in process->argv.
Much later when we try to access the same process->argv in
finish_command, this leads us to access a memory location that no longer
contains what we want. As argv0 is only used for printing errors, this
is not easily noticed in normal git operations. However when running
t0021-conversion.sh through valgrind, valgrind rightfully complains:
==21024== Invalid read of size 8
==21024== at 0x2ACF64: finish_command (run-command.c:869)
==21024== by 0x2D6B18: subprocess_exit_handler (sub-process.c:72)
==21024== by 0x2AB41E: cleanup_children (run-command.c:45)
==21024== by 0x2AB526: cleanup_children_on_exit (run-command.c:81)
==21024== by 0x54AD487: __run_exit_handlers (in /usr/lib/libc-2.26.so)
==21024== by 0x54AD4D9: exit (in /usr/lib/libc-2.26.so)
==21024== by 0x11A9EF: handle_builtin (git.c:550)
==21024== by 0x11ABCC: run_argv (git.c:602)
==21024== by 0x11AD8E: cmd_main (git.c:679)
==21024== by 0x1BF125: main (common-main.c:43)
==21024== Address 0x1ffeffec00 is on thread 1's stack
==21024== 1504 bytes below stack pointer
==21024==
These days, the child_process structure has its own args array, and
the standard way to set up its argv[] is to use that one, instead of
assigning to process->argv to point at an array that is outside.
Use that facility automatically fixes this issue.
Reported-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_oid_hex_from_objpath takes care of creating a oid from a
pathname. It does this by memcpy'ing the first two bytes of the path to
the "hex" string, then skipping the '/', and then copying the rest of the
path to the "hex" string. Currently it fails to increase the pointer to
the hex string, so the second memcpy invocation just mashes over what
was copied in the first one, and leaves the last two bytes in the string
uninitialized.
This breaks valgrind in t5540, although the test passes without
valgrind:
==5490== Use of uninitialised value of size 8
==5490== at 0x13C6B5: hexval (cache.h:1238)
==5490== by 0x13C6DB: hex2chr (cache.h:1247)
==5490== by 0x13C734: get_sha1_hex (hex.c:42)
==5490== by 0x13C78E: get_oid_hex (hex.c:53)
==5490== by 0x118BDA: get_oid_hex_from_objpath (http-push.c:1023)
==5490== by 0x118C92: process_ls_object (http-push.c:1038)
==5490== by 0x118E5B: handle_remote_ls_ctx (http-push.c:1077)
==5490== by 0x118227: xml_end_tag (http-push.c:815)
==5490== by 0x50C1448: ??? (in /usr/lib/libexpat.so.1.6.6)
==5490== by 0x50C221B: ??? (in /usr/lib/libexpat.so.1.6.6)
==5490== by 0x50BFBF2: ??? (in /usr/lib/libexpat.so.1.6.6)
==5490== by 0x50C0B24: ??? (in /usr/lib/libexpat.so.1.6.6)
==5490== Uninitialised value was created by a stack allocation
==5490== at 0x118B63: get_oid_hex_from_objpath (http-push.c:1012)
==5490==
Fix this by correctly incrementing the pointer to the "hex" variable, so
the first two bytes are left untouched by the memcpy call, and the last
two bytes are correctly initialized.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cleanup_path we're passing in a char array, run a memcmp on it, and
run through it without ever checking if something is in the array in the
first place. This can lead us to access uninitialized memory, for
example in t5541-http-push-smart.sh test 7, when run under valgrind:
==4423== Conditional jump or move depends on uninitialised value(s)
==4423== at 0x242FA9: cleanup_path (path.c:35)
==4423== by 0x242FA9: mkpath (path.c:456)
==4423== by 0x256CC7: refname_match (refs.c:364)
==4423== by 0x26C181: count_refspec_match (remote.c:1015)
==4423== by 0x26C181: match_explicit_lhs (remote.c:1126)
==4423== by 0x26C181: check_push_refs (remote.c:1409)
==4423== by 0x2ABB4D: transport_push (transport.c:870)
==4423== by 0x186703: push_with_options (push.c:332)
==4423== by 0x18746D: do_push (push.c:409)
==4423== by 0x18746D: cmd_push (push.c:566)
==4423== by 0x1183E0: run_builtin (git.c:352)
==4423== by 0x11973E: handle_builtin (git.c:539)
==4423== by 0x11973E: run_argv (git.c:593)
==4423== by 0x11973E: main (git.c:698)
==4423== Uninitialised value was created by a heap allocation
==4423== at 0x4C2CD8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==4423== by 0x4C2F195: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==4423== by 0x2C196B: xrealloc (wrapper.c:137)
==4423== by 0x29A30B: strbuf_grow (strbuf.c:66)
==4423== by 0x29A30B: strbuf_vaddf (strbuf.c:277)
==4423== by 0x242F9F: mkpath (path.c:454)
==4423== by 0x256CC7: refname_match (refs.c:364)
==4423== by 0x26C181: count_refspec_match (remote.c:1015)
==4423== by 0x26C181: match_explicit_lhs (remote.c:1126)
==4423== by 0x26C181: check_push_refs (remote.c:1409)
==4423== by 0x2ABB4D: transport_push (transport.c:870)
==4423== by 0x186703: push_with_options (push.c:332)
==4423== by 0x18746D: do_push (push.c:409)
==4423== by 0x18746D: cmd_push (push.c:566)
==4423== by 0x1183E0: run_builtin (git.c:352)
==4423== by 0x11973E: handle_builtin (git.c:539)
==4423== by 0x11973E: run_argv (git.c:593)
==4423== by 0x11973E: main (git.c:698)
==4423==
Avoid this by using skip_prefix(), which knows not to go beyond the
end of the string.
Reported-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if the strbuf containing data to sort is empty before attempting
to trim a trailing newline character.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message shown when a flag is found when expecting a
filename wasn't clear as it didn't communicate what was wrong
using the 'suitable' words in *all* cases.
$ git ls-files
README.md
test-file
Correct case,
$ git rev-parse README.md --flags
README.md
--flags
fatal: bad flag '--flags' used after filename
Incorrect case,
$ git grep "some random regex" -n
fatal: bad flag '-n' used after filename
The above case is incorrect as "some random regex" isn't a filename
in this case.
Change the error message to be general and communicative. This results
in the following output,
$ git rev-parse README.md --flags
README.md
--flags
fatal: option '--flags' must come before non-option arguments
$ git grep "some random regex" -n
fatal: option '-n' must come before non-option arguments
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error messages shown when the branch command is misused
by supplying it wrong number of parameters wasn't meaningful.
That's because it used the the phrase "too many branches"
assuming all parameters to be "valid" branch names. It's not
always the case as exemplified below,
$ git branch
foo
* master
$ git branch -m foo foo old
fatal: too many branches for a rename operation
Change the messages to be more general thus making no assumptions
about the "parameters".
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/ui-color-always-to-auto-maint:
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
This test wants to confirm that "clean -i" shows color
output. Using test_terminal gives us a more realistic
environment than "color.ui=always", and prepares us for the
behavior of "always" changing in a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests for --color-moved write their output to a file,
but doing so suppresses color output under "auto". Right now
this is solved by running the whole script under
"color.diff=always". In preparation for the behavior of
"always" changing, let's explicitly enable color.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be handy to use `--color=always` (or it's synonym
`--color`) on the command-line to convince a command to
produce color even if it's stdout isn't going to the
terminal or a pager.
What's less clear is whether it makes sense to set config
variables like color.ui to `always`. For a one-shot like:
git -c color.ui=always ...
it's potentially useful (especially if the command doesn't
directly support the `--color` option). But setting `always`
in your on-disk config is much muddier, as you may be
surprised when piped commands generate colors (and send them
to whatever is consuming the pipe downstream).
Some people have done this anyway, because:
1. The documentation for color.ui makes it sound like
using `always` is a good idea, when you almost
certainly want `auto`.
2. Traditionally not every command (and especially not
plumbing) respected color.ui in the first place. So
the confusion came up less frequently than it might
have.
The situation changed in 136c8c8b8f (color: check color.ui
in git_default_config(), 2017-07-13), which negated point
(2): now scripts using only plumbing commands (like
add-interactive) are broken by this setting.
That commit was fixing real issues (e.g., by making
`color.ui=never` work, since `auto` is the default), so we
don't want to just revert it. We could turn `always` into a
noop in plumbing commands, but that creates a hard-to-explain
inconsistency between the plumbing and other commands.
Instead, let's just turn `always` into `auto` for all config.
This does break the "one-shot" config shown above, but again,
we're probably better to have simple and consistent rules than
to try to special-case command-line config.
There is one place where `always` should retain its meaning:
on the command line, `--color=always` should continue to be
the same as `--color`, overriding any isatty checks. Since the
command-line parser also depends on git_config_colorbool(), we
can use the existence of the "var" string to deterine whether
we are serving the command-line or the config.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When ref-filter learned about want_color() in 11b087adfd
(ref-filter: consult want_color() before emitting colors,
2017-07-13), it became useful to be able to turn colors off
and on for specific commands. For git-branch, you can do so
with --color/--no-color.
But for git-for-each-ref and git-tag, the other users of
ref-filter, you have no option except to tweak the
"color.ui" config setting. Let's give both of these commands
the usual color command-line options.
This is a bit more obvious as a method for overriding the
config. And it also prepares us for the behavior of "always"
changing (so that we are still left with a way of forcing
color when our output goes to a non-terminal).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To test the color output, we must convince "git branch" to
write colors to a non-terminal. We do that now by setting
the color config to "always". In preparation for the
behavior of "always" changing, let's switch to using the
"--color" command-line option, which is more direct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for the behavior of "always" changing to
match "auto", we can simply drop this test. We already check
other forms (like "--color") independently.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We test the %C() format placeholders with a variety of
color-inducing options, including "--color" and
"-c color.ui=always". In preparation for the behavior of
"always" changing, we need to do something with those
"always" tests.
We can drop ones that expect "always" to turn on color even
to a file, as that will become a synonym for "auto", which
is already tested.
For the "--no-color" test, we need to make sure that color
would otherwise be shown. To do this, we can use
test_terminal, which enables colors in the default setup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To check that "status -v" respects diff config, we set
"color.diff" and look at the output of "status". We could
equally well use any diff config. Since color output depends
on a lot of other factors (like whether stdout is a tty, and
how we interpret "always"), let's use a more mundane option.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script tests the output of status with various formats
when color is enabled. It uses the "always" setting so that
the output is valid even though we capture it in a file.
Using test_terminal gives us a more realistic environment,
and prepares us for the behavior of "always" changing.
Arguably we are testing less than before, since "auto" is
already the default, and we can no longer tell if the config
is actually doing anything.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When testing whether "add -p" can generate colors, we set
color.ui to "always". This isn't a very good test, as in the
real-world a user typically has "auto" coupled with stdout
going to a terminal (and it's plausible that this could mask
a real bug in add--interactive if we depend on plumbing's
isatty check).
Let's switch to test_terminal, which gives us a more
realistic environment. This also prepare us for future
changes to the "always" color option.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4015 contains many color-related tests which need to
override the "is stdout a tty" check. They do so by setting
the color.diff config, but we can accomplish the same with
the --color option. Besides being shorter to type, switching
will prepare us for upcoming changes to "always" when see it
in config.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of the test-terminal script is to simulate in the
test scripts an environment where output is going to a real
terminal.
But since test-lib.sh also sets TERM=dumb, the simulation
isn't very realistic. The color code will skip auto-coloring
for TERM=dumb, leading to us liberally sprinkling
test_terminal env TERM=vt100 git ...
through the test suite to convince the tests to actually
generate colors. Let's set TERM for programs run under
test_terminal, which is one less thing for test-writers to
remember.
In most cases the callers can be simplified, but note there
is one interesting case in t4202. It uses test_terminal to
check the auto-enabling of --decorate, but the expected
output _doesn't_ contain colors (because TERM=dumb
suppresses them). Using TERM=vt100 is closer to what the
real world looks like; adjust the expected output to match.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Operations that do not touch (majority of) packed refs have been
optimized by making accesses to packed-refs file lazy; we no longer
pre-parse everything, and an access to a single ref in the
packed-refs does not touch majority of irrelevant refs, either.
* mh/mmap-packed-refs: (21 commits)
packed-backend.c: rename a bunch of things and update comments
mmapped_ref_iterator: inline into `packed_ref_iterator`
ref_cache: remove support for storing peeled values
packed_ref_store: get rid of the `ref_cache` entirely
ref_store: implement `refs_peel_ref()` generically
packed_read_raw_ref(): read the reference from the mmapped buffer
packed_ref_iterator_begin(): iterate using `mmapped_ref_iterator`
read_packed_refs(): ensure that references are ordered when read
packed_ref_cache: keep the `packed-refs` file mmapped if possible
packed-backend.c: reorder some definitions
mmapped_ref_iterator_advance(): no peeled value for broken refs
mmapped_ref_iterator: add iterator over a packed-refs file
packed_ref_cache: remember the file-wide peeling state
read_packed_refs(): read references with minimal copying
read_packed_refs(): make parsing of the header line more robust
read_packed_refs(): only check for a header at the top of the file
read_packed_refs(): use mmap to read the `packed-refs` file
die_unterminated_line(), die_invalid_line(): new functions
packed_ref_cache: add a backlink to the associated `packed_ref_store`
prefix_ref_iterator: break when we leave the prefix
...
The output from "git diff --summary" was broken in a recent topic
that has been merged to 'master' and lost a LF after reporting of
mode change. This has been fixed.
* sb/diff-color-move:
diff: correct newline in summary for renamed files
Code clean-up.
* jk/validate-headref-fix:
validate_headref: use get_oid_hex for detached HEADs
validate_headref: use skip_prefix for symref parsing
validate_headref: NUL-terminate HEAD buffer
Code clean-up to prevent future mistakes by copying and pasting
code that checks the result of read_in_full() function.
* jk/read-in-full:
worktree: check the result of read_in_full()
worktree: use xsize_t to access file size
distinguish error versus short read from read_in_full()
avoid looking at errno for short read_in_full() returns
prefer "!=" when checking read_in_full() result
notes-merge: drop dead zero-write code
files-backend: prefer "0" for write_in_full() error check
Some commands (most notably "git status") makes an opportunistic
update when performing a read-only operation to help optimize later
operations in the same repository. The new "--no-optional-locks"
option can be passed to Git to disable them.
* jk/no-optional-locks:
git: add --no-optional-locks option
Add comment to a few functions that use a short-lived buffer the
caller can peek and copy out of.
* hn/path-ownership-comment:
read_gitfile_gently: clarify return value ownership.
real_path: clarify return value ownership
